Search Results

Search found 18794 results on 752 pages for 'graphics design'.

Page 513/752 | < Previous Page | 509 510 511 512 513 514 515 516 517 518 519 520  | Next Page >

• Can my laptop run dual 1080p (Sony Vaio - Nvidia 330M)

  - by Charlino

  I am looking to buy a monitor to setup dual monitors for my laptop and was wondering if my laptop could handle 2 x 1080p. I have a Sony Vaio VPCF116FG which has a Nvidia GeForce 330M chip and 1GB dedicated graphics memory. The laptop also has a Intel® Core™ i7-720QM Processor (1.60 GHz with Turbo Boost up to 2.80 GHz) but I don't know if that's relevant(?). The laptop screen has a native resolution of 1080p (1920 x 1080) so I'll be looking at buying a external monitor with 1080p to connect up using a HDMI cable. So, the question is, will my laptop be able to handle it's own 1080p screen AND an external 1080p screen? TIA, Charles

  Read the article

• Install 64-bit Ubuntu or 32-bit?

  - by nitbuntu

  I'll be receiving a new notebook in a few days and was planning on running Ubuntu on it as it's compatible and the notebook has no OS pre-installed. The specifications are: Core 2 Duo, T6600, 4 GB RAM, Intel integrated graphics. I know a year or two ago, running a 64-bit version of Ubuntu was not advised due to much of the applications and plugins (e.g. Flash) only running on 32-bit. Is this still the case? Would I get better performance with 64-bit Ubuntu since I have 4 GB of RAM? Are there any downsides anymore?

  Read the article

• Are there Any free XSL-FO editors?

  - by Russell

  I am looking for a free WYSIWYG editor of XSL-FO. Specifically, I would like to be able to design the FO file through a visual editor. I am aware of some that are available for purchase and evaluation, however I was wondering if there are any free editors available? Thanks

  Read the article

• Black screen on Ubuntu 12.04

  - by user1648371

  I've just upgraded to Ubuntu 12.04 and I'm experiencing some problems. The first thing I noticed is that when I click the Workspace switcher all I get is a black screen (I can guess where the different workspaces are located and clicked on them, not a practical solution though). In addition when I lock the screen or suspend the laptop (a Vaio VPCEB4M1E) I get a shifted screen (I see the right most vertical stripe on the left size of the monitor and nothing about all the rest, to put it clearly I can see the gear that allows me to turn the pc off, etc, but not much more..) when I go to the additional driver menu I see the "ATI/AMD proprietary FGLRX graphics driver" are installed and the post-release update version is available. I don't know if the problem is driver related, so before doing anything I'd like to get some suggestions from you guys. Thanks you!

  Read the article

• How to Implement Custom Windows Forms Designer ?

  - by this. __curious_geek

  How can we implement Windows Forms Designer in a WinForms application ? Visual Studio uses System.ComponentModel.Design namespace to implement the Form Designer. How can we use this to implement a Form Designer in a WinForms application ? Is there any other library available for achieving the same ?

  Read the article

• Django: How to get current user in admin forms

  - by lazerscience

  In Django's ModelAdmin I need to display forms customized according to the permissions an user has. Is there a way of getting the current user object into the form class, so that i can customize the form in its __init__ method? I think saving the current request in a thread local would be a possibility but this would be my last resort think I'm thinking it is a bad design approach....

  Read the article

• ASP.NET WebForms vs MVC [after VS2010/.NET 4.0 announcement]

  - by fjxx

  Two of the biggest advantages of MVC over webforms were non-existent viewstate and URL routing. VS2010 and .NET 4.0 incorporates built-in URL routing for Webforms as well as better control for viewstate. I advocate use of MVC for extranet sites due to the MVC design pattern and its general lightweight nature but in light of this new announcement has Webforms closed the gap? Why would you still pick MVC over Webforms? Thanks

  Read the article

• Server 2008 R2 How to Change Windows 7 Basic Theme Color

  - by Wes Sayeed

  We're deploying thin clients connecting to a terminal server farm. The computers have high visibility to the public and I would like them to at least look presentable and not like something out of 1995. So I installed the Desktop Experience feature and enabled the Theme service. The server will not support Aero because it has no 3D graphics, but we can enable the Windows 7 Basic theme, which has the Aero look without the 3D effects. The problem with that theme is that you can select any window color you want, as long as it's baby boy blue. Is there a way to make those windows another color? The window color controls do nothing.

  Read the article

• How to upload images from iPhone

  - by Karthik.K

  Hi, I;m new to iPhone application development. I need to design an app to upload images from my iPhone to a HTTP Server. I tried following this http://stackoverflow.com/questions/125306/how-can-i-upload-a-photo-to-a-server-with-the-iphone/2528575#2528575, but did not taste success. Please help me out. :) Thanks! :)

  Read the article

• How to black out second monitor when playing a full screen game?

  - by Gary

  I've got two monitors. When I play a full screen game in my primary monitor, the second monitor still shows the Windows desktop. How can I black out the second monitor so that it doesn't show anything at all? My graphics card is from ATI. I'm running Windows 7 in Boot Camp on an iMac. I don't know if this makes a difference, however, as any solution to my question will do, really. For instance, is there a tiny app that I could run to disable the second monitor for a while? I'd rather not have to open Windows display settings every time I run a game and disable the monitor that way, though.

  Read the article

• How can you invert the colors of a PDF?

  - by legr3c

  I need to invert all the colors of a PDF document (background, text, graphics, and images). I want it persistent in the file so the inverted viewing options, that some viewers offer, won't help. Rasterizing the document and using image manipulation software is also not an option. I read somewhere that this can be done with the Enfocus PitStop plugin for Acrobat. However I didn't see a corresponding command anywhere. Am I missing something? Then I read that the ARTS PDF Crackerjack plugin for Acrobat offers negative printing so I tried that, too. The option is there but it simply doesn't work. I have been searching for very long for a way to do this. It seems like a common enough task but I just can't find out how to do it. Are there maybe any virtual printer drivers or something of the sort that support negative printing? Can anyone help?

  Read the article

• UIModalTransitionStylePartialCurl not rotating

  - by Mongo

  I've got a modal view controller that is being displayed using UIModalPresentationFullScreen with the TransitionStyle set as UIModalTransitionStylePartialCurl. This works beautifully. My problem is that when the device is rotated, my view rotates (as intended), but the "curl" effect does not. Does anyone know if this is by design, or is there something else that needs to be done? Thanks.

  Read the article

• manu help me in the effect

  - by tismon

  http://www.zazzle.com/cr/design/pt-mug this is just a demo site. i am suppose to do something like this in PHP. can any one tell how this can be done with PHP ? what is the logic behind this ? is this possible with jquery or GD Library ? please help me.. thanks and regards tismon

  Read the article

• Using commit monitors as a form of code review

  - by Jeff Dege

  I'm working in a small company - four developers, working on a variety of projects. We've been looking at what we can do as cost-effective methods of process improvement, and an idea came up. Given what we do, we often have single developers working on parts of a system, independently of the other developers. This can have a number of negative affects: A developer might not be fully aware of the context in which a change is being implemented, and make the change in a way that will meet the current customer's needs, but will break functionality that other customers depend on. A developer might make a change that breaks the current architectural design, introducing a dependency that will cause problems in future development. Other developers might not be aware of how the system has changed, in areas that they have not worked on. We've talked about doing code reviews, as a way of dealing with these issues. But we've not had much success when we tried. It takes a lot of time to prepare a change for a code review, and it takes everybody out of production while the review is being performed. And the benefits of any review we've tried has been minimal. We're using Subversion (with TortioseSVN) as our VCS. I've been looking at the SubVersion CommitMonitor tool, and wondering whether it might work as a sort of poor-man's code review. It lists every commit made on the repository, allowing someone to see the changes that have been made, the log messages made for that change, the files that were included in the change, and the specific lines in each file that were changed. Rather than scheduling a meeting, trying to get everybody together to review every change, we could just have every developer review every other developer's commits, at whatever time was convenient. This would keep every developer abreast of what changes were being made elsewhere in the system, and would have every change reviewed for customer conflicts and design consistency, at a fairly low cost. If someone saw a problem with the code that was being checked in, he could discuss it with the developer who did the commit, or more likely, schedule a meeting to discuss how the new feature could be implemented in a way that would not impact other users or screw up the architecture. Anyone else doing anything like this, using commit monitors for such a purpose?

  Read the article

• How to change image to this color?

  - by askmoo

  I have this image And I need to change it to the color #D21108 (type of RED). Of course, I do not want to paint it to this color, but to change the color to #D21108 and its shades (like I do in Photoshop via Brush Colour Replacement). I have all info about this color, values of RGB, CMYK, Lab and HSV if you need them. Now, I guess I can easily change it via GIMP's menu "Colors". I tried options Color Balance, Hue-Saturation, Colorize, but I did not find a way to enter the starting color I need. I was closest to my aim via Hue-Saturation, but I could not get this red value, no matter what I tried. As I am not a graphics expert, please tell me how to accomplish this task. PS. What's the meaning of Lab and HSV in the color scheme? I know the meaning of RGB and CMYK.

  Read the article

• How do I make Linux recognize a new SATA /dev/sda drive I hot swapped in without rebooting?

  - by Philip Durbin

  Hot swapping out a failed SATA /dev/sda drive worked fine, but when I went to swap in a new drive, it wasn't recognized: [root@fs-2 ~]# tail -18 /var/log/messages May 5 16:54:35 fs-2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen May 5 16:54:35 fs-2 kernel: ata1: SError: { PHYRdyChg CommWake } May 5 16:54:40 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:45 fs-2 kernel: ata1: device not ready (errno=-16), forcing hardreset May 5 16:54:45 fs-2 kernel: ata1: soft resetting link May 5 16:54:50 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:55 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:54:55 fs-2 kernel: ata1: soft resetting link May 5 16:55:00 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:05 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:05 fs-2 kernel: ata1: soft resetting link May 5 16:55:10 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:40 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:40 fs-2 kernel: ata1: limiting SATA link speed to 1.5 Gbps May 5 16:55:40 fs-2 kernel: ata1: soft resetting link May 5 16:55:45 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:45 fs-2 kernel: ata1: reset failed, giving up May 5 16:55:45 fs-2 kernel: ata1: EH complete I tried a couple things to make the server find the new /dev/sda, such as rescan-scsi-bus.sh but they didn't work: [root@fs-2 ~]# echo "---" > /sys/class/scsi_host/host0/scan -bash: echo: write error: Invalid argument [root@fs-2 ~]# [root@fs-2 ~]# /root/rescan-scsi-bus.sh -l [snip] 0 new device(s) found. 0 device(s) removed. [root@fs-2 ~]# [root@fs-2 ~]# ls /dev/sda ls: /dev/sda: No such file or directory I ended up rebooting the server. /dev/sda was recognized, I fixed the software RAID, and everything is fine now. But for next time, how can I make Linux recognize a new SATA drive I have hot swapped in without rebooting? The operating system in question is RHEL5.3: [root@fs-2 ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.3 (Tikanga) The hard drive is a Seagate Barracuda ES.2 SATA 3.0-Gb/s 500-GB, model ST3500320NS. Here is the lscpi output: [root@fs-2 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) Update: In perhaps a dozen cases, we've been forced to reboot servers because hot swap hasn't "just worked." Thanks for the answers to look more into the SATA controller. I've included the lspci output for the problematic system above (hostname: fs-2). I could still use some help understanding what exactly isn't supported hardware-wise in terms of hot swap for that system. Please let me know what other output besides lspci might be useful. The good news is that hot swap "just worked" today on one of our servers (hostname: www-1), which is very rare for us. Here is the lspci output: [root@www-1 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 09:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS (rev 04)

  Read the article

• Rails - embedded polymorphic comment list + add comment form - example?

  - by odigity

  Hey, all. Working on my first Rails app. I've searched all around - read a bunch of tutorials, articles, and forum posts, watched some screencasts, and I've found a few examples that come close to what I'm trying to do (notably http://railscasts.com/episodes/154-polymorphic-association and ep 196 about nested model forms), but not exactly. I have two models (Podcast and BlogPost) that need to be commentable, and I have a Comment model that is polymorphically related to both. The railscasts above had a very similar example (ep 154), but Ryan used a full set of nested routes, so there were specific templates for adding and editing comments. What I want to do is show the list of comments right on the Podcast or BlogPost page, along with an Add Comment form at the bottom. I don't need a separate add template/route, and I don't need the ability to edit, only delete. This is a pretty common design on the web, but I can't find a Rails example specifically about this pattern. Here's my current understanding: I need routes for the create and delete actions, of course, but there are no templates associated with those. I'm also guessing that the right approach is to create a partial that can be included at the bottom of both the Podcast and BlogPost show template. The logical name for the partial seems to me to be something like _comments.html.haml. I know it's a common convention to have the object passed to the partial be named after the template, but calling the object 'comments' seems to not match my use case, since what I really need to pass is the commentable object (Podcast or BlogPost). So, I guess I'd use the locals option for the render partial call? (:commentable = @podcast). Inside the partial, I could call commentable.comments to get the comments collection, render that with a second partial (this time with the conventional use case, calling the partial _comment.html.haml), then create a form that submits to... what? REST-wise, it should be a POST to the collection, which would be /podcast|blogpost/:id/comments, and I think the helper for that is podcast_comments_path(podcast) if it were a podcast - not sure what to do though, since I'm using polymorphic comments. That would trigger the Comment.create action, which would then need to redirect back to the podcast|blogpost path /podcast|blogpost/:id. It's all a bit overwhelming, which is why I was really hoping to find a screencast or example that specifically implements this design.

  Read the article

• Word 2010 not printing body text on pages with images

  - by Oesor

  I've got a document exhibiting bizarre behavior -- when I print, the body text style is only displayed on pages without images. Headings, header and footer, and captions are printing on the page, along with any graphics such as border styles applied to the style, but the text itself doesn't print -- except for en dashes. The text is pretty basic -- a justified Calibri style. Images are their own style, a centered paragraph item. There's no floating image boxes or text boxes going on, everything's a paragraph style. It's not a print driver issue. I get identical behavior on both a HP and Brother laser printer. It's also not a paragraph-level style issue; I've inserted enough dummy text to move a printing paragraph on a page with no images to the next page, which has an image, and the paragraph does not print on the next page. Has anyone run into an issue like this and knows the solution?

  Read the article

• JQuery Accordion: how to embedded it into a dialog box?.

  - by Felix Guerrero

  Hi. I want to design a dialog box that contains an accordion with 3 sections, does anyone knows how to achieve this?. I'm trying with JQuery accordion example but still not success on it. I appreciated your ideas around this.

  Read the article

• vector quality of svg and pdf

  - by Kasper

  I'm converting pdf files to svg as it is easier to use svg files on webpages. I first thought the quality of svg must be similar to pdf, as they are both vector graphics. However, now I look a little better on it, it seems that pdf is a bit superior: (https://dl.dropboxusercontent.com/u/58922976/Photos/1.png) I wonder if I could change this in some way. Is this because pdf vectors are just better quality ? Or is this because chrome renders svg in lower quality than adobe reader renders pdf ? Is this a setting in the svg file that I could change ? Here is the pdf file: https://dl.dropboxusercontent.com/u/58922976/syllabusLinAlg2012.59.pdf And here is the svg file: (https://dl.dropboxusercontent.com/u/58922976/syllabusLinAlg2012.59.svg) I've made this svg file in illustrator, and only chrome is able to use the embedded svg fonts. So firefox and internet explorer won't give the expected result.

  Read the article

• Silverlight ItemsControl with Alternating ItemTemplate

  - by Ray Booysen

  Silverlight does not support Alternating Item Templates in an ItemsControl. I have a few ideas in mind as to how to accomplish this, but to avoid polluting the potential answers, I'll leave them out. If you had to design a method of providing alternating templates (and I mean a full data template) for an ItemsControl, how would you accomplish this.

  Read the article

• Looking for a good book on microprocessor internals

  - by David Holm

  I'm looking for a good book on how modern microprocessors are designed and work as I would like to increase my understanding of what makes them tick. Something that covers pipelines, superscalar architectures, caches etc. A book that is suitable for a programmer with several years of experience and has done and understands assembly programming and machine language, so basically not "CPUs for Dummies" or anything such. What books do people who design today's processors read for instance?

  Read the article

• KVM machine does not start ssh, network is started, used to work

  - by lleto

  have been searching an pulling my hear out for the last 6 hours. I have a virtual machine that has been running fine for the last six months. I was happy ssh'ing into it and it was running a database and some small apps. Tonight ssh stopped working, so I decided to reboot the machine. I now have the following situation: virsh list --all states machine as running I can ping the machine and get a reply When I ssh to the machine I see "ssh: connect to host [myserver] port 22: Connection refused" nmap does not show port 22 as open I have tried to: - reboot the machine once more (no luck) - mount the filesystem and check /etc/ssh/sshd.conf (has not changed since working situation) - install virsh console, however this does not seem to work When I mount the fs directly using losetup the strange thing is that file dates seem to be frozen in /var/log/ around the time of the crash. If I look in /var/run/ I can see an sshd.pid, but the time is 6 hours ago (and numerous reboots). My virsh xml looks like this: <domain type='kvm' id='21'> <name>myserver</name> <uuid>09678c8d-a99b-1d18-a7af-88d027cc8f93</uuid> <memory>1048576</memory> <currentMemory>1048576</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc-1.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/dev/disk01/myserver'/> <target dev='hda' bus='ide'/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <controller type='ide' index='0'> <alias name='ide0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:e3:13:86'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='virtio'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/1'> <source path='/dev/pts/1'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='5900' autoport='yes' listen='127.0.0.1'> <listen type='address' address='127.0.0.1'/> </graphics> <video> <model type='cirrus' vram='9216' heads='1'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='apparmor' relabel='yes'> <label>libvirt-09678c8d-a99b-1d18-a7af-88d027cc8f93</label> <imagelabel>libvirt-09678c8d-a99b-1d18-a7af-88d027cc8f93</imagelabel> </seclabel> </domain> I'm sort of lost as to where I can look to get the machine up and running again. On the same instance of kvm I have another server running which is working fine. Both are Ubuntu 12.04. All help is welcome....

  Read the article

• Best practices concerning view model and model updates with a subset of the fields

  - by Martin

  By picking MVC for developing our new site, I find myself in the midst of "best practices" being developed around me in apparent real time. Two weeks ago, NerdDinner was my guide but with the development of MVC 2, even it seems outdated. It's an thrilling experience and I feel privileged to be in close contact with intelligent programmers daily. Right now I've stumbled upon an issue I can't seem to get a straight answer on - from all the blogs anyway - and I'd like to get some insight from the community. It's about Editing (read: Edit action). The bulk of material out there, tutorials and blogs, deal with creating and view the model. So while this question may not spell out a question, I hope to get some discussion going, contributing to my decision about the path of development I'm to take. My model represents a user with several fields like name, address and email. All the names, in fact, on field each for first name, last name and middle name. The Details view displays all these fields but you can change only one set of fields at a time, for instance, your names. The user expands a form while the other fields are still visible above and below. So the form that is posted back contains a subset of the fields representing the model. While this is appealing to us and our layout concerns, for various reasons, it is to be shunned by serious MVC-developers. I've been reading about some patterns and best practices and it seems that this is not in key with the paradigm of viewmodel == view. Or have I got it wrong? Anyway, NerdDinner dictates using FormCollection och UpdateModel. All the null fields are happily ignored. Since then, the MVC-community has abandoned this approach to such a degree that a bug in MVC 2 was not discovered. UpdateModel does not work without a complete model in your formcollection. The view model pattern receiving most praise seems to be Dedicated view model that contains a custom view model entity and is the only one that my design issue could be made compatible with. It entails a tedious amount of mapping, albeit lightened by the use of AutoMapper and the ideas of Jimmy Bogard, that may or may not be worthwhile. He also proposes a 1:1 relationship between view and view model. In keeping with these design paradigms, I am to create a view and associated view for each of my expanding sets of fields. The view models would each be nearly identical, differing only in the fields which are read-only, the views also containing much repeated markup. This seems absurd to me. In future I may want to be able to display two, more or all sets of fields open simultaneously. I will most attentively read the discussion I hope to spark. Many thanks in advance.

  Read the article

• difference between compiled and installed via rpm (zypper)

  - by cherouvim

  In an openSUSE 11.1 I download, compile and install ImageMagick via: wget ftp://.../pub/graphics/ImageMagick/ImageMagick-6.7.7-0.zip unzip ImageMagick-6.7.7-0.zip cd ImageMagick-6.7.7-0 ./configure --prefix=/usr/local/ImageMagick make make install Everything works nicelly until I discover that JPG is not supported: identify -list format | grep -i jpg [nothing related to JPG returned] So I reconfigure and recompile using: ./configure --prefix=/usr/local/ImageMagick --with-jpeg=yes --with-jp2=yes make make install But that changes nothing. I end up uninstalling: make uninstall and installing via zypper: zypper install ImageMagick This installed version 6.4.3 and now it does support JPG: identify -list format | grep -i jpg JPG* JPEG rw- Joint Photographic Experts Group JFIF format Any idea on what is going on here? What is a possible reason that this capability of ImageMagick was not there when compiled from source but was there when installed from rpm? Note that I don't necessarily care a lot about ImageMagick (since it now works), but generally about his kind of behaviour, becase in one way or another I've seen this happen in other ocasions as well.

  Read the article

< Previous Page | 509 510 511 512 513 514 515 516 517 518 519 520  | Next Page >