Search Results

Search found 14646 results on 586 pages for 'installation guide'.

Page 517/586 | < Previous Page | 513 514 515 516 517 518 519 520 521 522 523 524  | Next Page >

• VMware NAS/iSCSI recommendations - smallish organization

  - by Bubnoff

  I have two VMware servers - ESX + ESXi. Two backup NAS boxes. The current NAS boxes are low-cost and unsuitable for running VMs from. Support NFS only. Slow. My plan is to have a dedicated iSCSI/NAS for storing and running VMs. Two additional low-cost boxes for backup. I'm looking for advice regarding 2 things really: Recommendations as far as VMware architecture/design for a smaller organization. Less than 20 Virtual Machines. 2 servers + 2 x 1.5 terabyte backup NAS boxes. A good NAS/iSCSI box with your recommendation on RAID config ...I would go with 6 or better. I'm trying to design an installation that is both fast and reliable/redundant. If you have any experiences to share or your current configuration including network design ( switches, fiber ...etc ), I will be enormously thankful. I'm not married to this idea, so if you have a design not using iSCSI NAS boxes ...let er rip. Cost? Can we stay around $5,000 ( on top of already stated components )? Links to info are welcome also. Thanks for reading! Bubnoff

  Read the article

• Migrate Windows Server 2008 to a new hard disk

  - by MainMa

  Hi, I have a machine with Windows Server 2008. I want to change the hard disk drive, but keep everything else. I don't have a cd/dvd drive and don't want to buy it. My first idea was to make a byte-to-byte copy of the disk with Paragon Advanced Recovery. The problem is that when I try to boot from a new hard disk, it says that there were hardware changes and that Windows must be repaired, inviting me to insert the installation disk and follow repair instructions. I searched and found that 1:1 copy is not a correct way to do things. The correct one is to restore Windows to a new hard disk from a full system backup. But to restore, I need to have a dvd drive. I tried to make a copy of the Windows Server 2008 .iso on an USB flash drive, but the drive is not bootable (while the same procedure applied to Paragon Advanced Recovery ISO produces a bootable recovery USB flash drive). Now what else can I do (except buying a dvd drive)? Is there a way either to make Windows work without doing recovery or recover Windows 2008 without using a cd drive?

  Read the article

• Adding custom service to nagiosgraph

  - by ravloony

  I have successfully added nagiosgraph to our nagios installation. I also added a memory checker plugin, from here : http://blog.vergiss-blackjack.de/2010/04/nagios-plugin-to-check-memory-consumption/. However I can't seem to get the graph of this service to be output by nagiosgraph. The plugin returns a single line like this: 31% (3785 of 11903 MB) used so i added a rule like this to the map file: /output:(\d+)% \((\d+) of (\d+) MB\) used/ and push @s, ['Mem', ['Percentage', 'GUAGE', $1], ['Used', 'GUAGE', $2], ['Total', 'GUAGE', $3] ]; I have also read this : http://www.mail-archive.com/[email protected]/msg36835.html and made sure that process_performance_data=1 in the nagios conf file. So far I have no graph for the Mem service on any host, and no rrd file either. I am unsure how to proceed to get this working. The documentation is rather difficult to follow and I haven't managed yet to understand it enough to do this. Can anyone point me to a tutorial, or some documentation which explains the steps needed to get a service noticed and graphed by nagiosgraph?

  Read the article

• CUPS printer on Vritual Machine can be access via CUPS admin, but not by XP?

  - by SJaguar13

  I have a Zebra label printer connected to a Linux Mint virtual machine. It was set up with CUPS and a Windows XP computer can then print to it via http://192.168.1.76:632/printers/labelprinter. That was all fine and dandy I then hooked up a Fargo Pro L PVC card printer to a Windows XP virtual machine. I had to disconnect the label printer as the server that hosted both virtual machines only has 1 parallel port. Now I plugged in the Zebra again, and it cannot print from the Windows XP computer anymore. If I go to the CUPS admin panel on the Windows XP computer, I can see it, everything looks fine, and I can send it a test page to print which works. If I try to print from Windows, I get an error that the printer is not found/cannot connect to the server. The only other thing that changed was the firewall on the router to allow remote desktop to another computer from outside the network, but all the firewall stuff was for external use. Nothing affected the IP address of the internal network. The Linux Mint VM also had a PDF pritner that was shared with CUPS. That printer is also down. I tried setting up a new CUPS installation on another VM, and when I go to share it with XP, I get the same error. I don't know what to try. It has access, it can get to the admin from that computer, it seems to be up and ready, but when Windows tries to connect, the printer isn't found even though 4 days ago everything was fine. Any ideas?

  Read the article

• Courier-imap login problem after upgrading / enabling verbose logging

  - by halka

  I've updated my mail server last night, from Debian etch to lenny. So far I've encountered a problem with my postfix installation, mainly that I managed to broke the IMAP access somehow. When trying to connect to the IMAP server with Thunderbird, all I get in mail.log is: Feb 12 11:57:16 mail imapd-ssl: Connection, ip=[::ffff:10.100.200.65] Feb 12 11:57:16 mail imapd-ssl: LOGIN: ip=[::ffff:10.100.200.65], command=AUTHENTICATE Feb 12 11:57:16 mail authdaemond: received auth request, service=imap, authtype=login Feb 12 11:57:16 mail authdaemond: authmysql: trying this module Feb 12 11:57:16 mail authdaemond: SQL query: SELECT username, password, "", '105', '105', '/var/virtual', maildir, "", name, "" FROM mailbox WHERE username = '[email protected]' AND (active=1) Feb 12 11:57:16 mail authdaemond: password matches successfully Feb 12 11:57:16 mail authdaemond: authmysql: sysusername=<null>, sysuserid=105, sysgroupid=105, homedir=/var/virtual, [email protected], fullname=<null>, maildir=xoxo.sk/[email protected]/, quota=<null>, options=<null> Feb 12 11:57:16 mail authdaemond: Authenticated: sysusername=<null>, sysuserid=105, sysgroupid=105, homedir=/var/virtual, [email protected], fullname=<null>, maildir=xoxo.sk/[email protected]/, quota=<null>, options=<null> ...and then Thunderbird proceeds to complain that it cant' login / lost connection. Thunderbird is definitely not configured to connect through SSL/TLS. POP3 (also provided by Courier) is working fine. I've been mainly looking for a way to make the courier-imap logging more verbose, like can be seen for example here. Edit: Sorry about the mess, I've found that I've been funneling the log through grep imap, which naturally didn't display entries for authdaemond. The verbose logging configuration entry is found in /etc/courier/imapd under DEBUG_LOGIN=1 (set to 1 to enable verbose logging, set to 2 to enable dumping plaintext passwords to logfile. Careful.)

  Read the article

• Blank list of windows services

  - by Joe

  Recently when I open windows services (always as administrator) I get a blank list of services: When I try and click on one of the empty lines I get this "Script Error" message: This happens over and over again, after several times I restarted my computer. I can't pinpoint exactly when this started happening or if I made any specific changes to my computer at that time. Someone told my to try running scf /scannow as administrator, but when I try to do that the scan stops at 34% and I get the message: "Windows Resource Protection could not perform the requested operation." I am running Windows 7 Enterprise 64 bit, and I would really like to avoid reinstalling windows. Does anyone know how to fix this? Edit - Here is another attempt I made and some more information that might help: Following WhoIsRich's suggestion, I tried the command sfc /scannow /offbootdir=c:\ /offwindir=c:\windows. This gave the error message "The arguments passed to sfc are invalid. The offline windows directory specified points to the online system", and then I realized this command is meant to be run after booting from another system. Since I don't have my windows installation disk right now, I used my own system to create a recovery disk, and then restarted my computer and used the recovery disk to boot. I then ran the above command, and I got the following message: "Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log". I then restarted my computer and let it boot up normally. The problem with windows services persists, and the CBS.log file is a long log file with many entries, and I don't know if there is useful information in it, and if there is, how to find it.

  Read the article

• Can not copy files after installing windows

  - by Ali

  I am experiencing a weird problem. I was running Xubuntu on my laptop until yesterday that I had to delete Xubuntu and install Windows. I had a NTFS partition on my Xubuntu that I kept some files on it. Today after installing windows I wanted to move all the files from that partition to an external HDD. I selected all files and folders and clicked on Copy, then I went to the HDD and clicked on paste but nothing happened. I can not do that. I do not know why. I copy the files, and wherever I click paste, nothing happens. If I try to copy the files and folders one by one, I can copy some of them, but some of them do not move. The other problem I have is that I can not open some files, in particular pdf files. When I click on pdf files I get this error: There was an error opening this document. This file cannot be found. Also, I cannot play some mp4 files. I can not open some jpg and txt files. I get this error The directory name is invalid. So in summary, after removing Xubuntu and installing windows 7 I have the following problems with one of the NTFS partitions on my internal drive: Can not copy or cut all folders and files from that partition to any other partition - I also do not get any errors. Can copy some folders and files Can not access some pdf, jpeg, txt and mp4 files and get the above errors. I should also mention I did not change anything for this partition during the installation or formatting the other partitions.

  Read the article

• PHP 5.3.2 Upgrade on Windows

  - by mcondiff

  I have a development box running Windows XP, Apache 2.2.15 Mysql and PHP 5.2.6 About a month ago I updated the Apache to the latest version and it went swimmingly. I am not having the same success with upgrading PHP to the latest version. I backed up my PHP directory and then deleted it. Used the Windows Installer for PHP 5.3.2, installed as an Apache 2.2.X module. I can get "Hello World" and phpinfo() to come up but cannot get mysql to connect. I have the extension un-commented in the php.ini and shouldn't really have to touch the Apache httpd.conf file since I didn't change the directory of PHP. Not sure what I'm doing wrong here. I have to get this right and then upgrade the Live Server too so I want to get this down pat. I've tried to use installation guides on the web with no luck. Any info pertaining to this problem would be great. I'm also afraid that the other PHP modules may not load but cannot really tell anything past mysql not working.

  Read the article

• Migrate openldap users and groups

  - by user53864

  I have an OpenLDAP server running on one of my ubuntu 8.10 servers. I used command-line only for OpenLdap installation and some basic configurations, everything else I'll configure with the Webmin gui tool. I'm trying to migrate to ubuntu 10.04 and I was able to migrate all other servies, application and databases but not the ldap. I'm an ldap beginner: I have installed OpenLDAP server and client on ubuntu 10.04 server using the link and used the following command to export and import ldap users and groups To export from 8.10 server slapcat > ldap.ldif To import to 10.04 server Stop ldap and slapadd -l ldap.ldif and Start ldap Then I accessed Webmin and checked in Ldap users and groups and I could see all the users and groups of my old ldap server.Whenever I create an ldap user from the webmin(in 8.10 or 10.04) a unix user is also created with the home directory under /home. But the imported users in 10.04 from 8.10 are not present as a unix user(/etc/passwd). How could I make the ldap users available as a unix user, is there any perfect way to export and import?. I also wanted to check the ldap users from the terminal that if password is exported properly but I don't know how to access the ldap users which are not available as unix users. On 8.10, I just use su - ldapuser and it is not working in the 10.04 as unix users are not created for the exported ldap users. If every thing works fine then the CVS works as it is using ldap authentication. Anybody could help me?

  Read the article

• Problem Uninstalling Microsoft Internet Explorer

  - by Roger F. Gay

  On Windows Vista Home Premium (x64) I am trying to uninstall Microsoft Internet Explorer. The procedures explained all over the web involve going through the control panel to Programs and Features. If MSIE is listed there, then uninstall in the usual way. If it is not listed there, click Turn Windows features on and off and deactivate it there. But Internet Explorer is not listed in either place. Background: I initiated some process in MSIE a couple of months ago that caused all web pages to no longer save login information or remain logged in when requested. As you can tell from the way I described that, I don't remember what it was and have no way to simply reverse it. I had a few problems with .NET Framework as well. So, I've uninstalled all browsers except MSIE and uninstalled .NET Framework. I've reinstalled .NET Framework and all other browsers. I have not been able to uninstall MSIE. Have Tried: I tried installing over the existing installation, but auto-update must be keeping it nicely up to date. The attempt simply produced an information window telling me that my current version is more up-to-date than the new version I tried to install.

  Read the article

• How do I rename my old Program Files folder?

  - by SteveJ

  I installed a new SSD as my boot drive (C:), installed a fresh version of Windows 7 64-bit, and kept my existing SATA drive in the system (D:). I want to keep using my D: drive for file storage (no sense filling up the SSD with stuff that isn't performance critical) and I haven't formatted the D: drive because there's stuff on there I want to keep. I also want to create a new "D:\Program Files" folder so I can install apps that aren't performance-critical there. So I decided I'd rename the existing "D:\Program Files" from my old Windows install to "D:\Old Program Files" and then create a new "D:\Program Files" directory. Easy, right? I can see "D:\Program Files" just fine in Explorer. I right click, select Rename, and type "Old Program Files." I get the alert that says I need Admin permission to do this, so I press the confirm button with the shield. But the folder still appears as "Program Files" in Explorer. I jump out to the command line, and it appears as "Old Program Files" when I do a dir. I can even do mkdir "Program Files" and when I do a dir they both appear. But in the Explorer GUI, it looks like I have two "Program Files" folders. This will be confusing during app installation because I won't be able to tell which one is which. I've tried poking around in the properties tab of the old folder, but can't find anything that would explain what's causing the issue. How do I rename the old Program Files folder?

  Read the article

• Why does my Intel Tolapai network chip not transmit packets?

  - by Hanno Fietz

  I'm trying to deploy an embedded system (NISE 110 by Nexcom) based on the Intel EP80579 (Tolapai) chip. Tolapai apparently integrates controllers for Ethernet etc. on a single chip (Intel homepage). The machine can't get a network connection. Diagnosis as far as I could manage: Drivers drivers from Intel compiled and installed without problems (version 1.0.3-144). Kernel version and Linux distribution (CentOS 5.2, 2.6.18) match the driver's installation instructions. drivers are loaded and show up in lsmod (module names are gcu and iegbe) interfaces eth0 and eth1 show up in ifconfig ifconfig I can bring up the interfaces with fixed IP pinging the interface locally works ifconfig shows flag UP but not RUNNING Link ethtool shows "Link detected: no", "Speed: unknown (65536)" and "Duplex: unknown (255)" Link LED is on on the other side of the cable, ethtool shows "Link detected: yes" and reports a speed of 1000 Mbps, which has allegedly been auto-neogotiated with the problematic device. Network traffic analysis the device does not reply on ARP, ICMP echo or anything else (iptables is down) when trying to send ICMP or DHCP requests, they never reach the other end activity LED is off on the device, on at the other end. I tried the following without any effect: Different cables (2 straight, one crossed), I get the link LED lit up on each. Three different devices on the other end (one PC, one netbook, one router) Fixed ARP table entries on both sides Connecting both network ports of the machine with each other, won't ping through the cable, but will ping locally. Tried straight and crossed cables for that.

  Read the article

• Distributing processing for an application that wasn't designed with that in mind

  - by Tim

  We've got the application at work that just sits and does a whole bunch of iterative processing on some data files to perform some simulations. This is done by an "old" Win32 application that isn't multi-processor aware, so new(ish) computers and workstations are mostly sitting idle running this application. However, since it's installed by a typical Windows Install Shield installer, I can't seem to install and run multiple copies of the application. The work can be split up manually before processing, enabling the work to be distributed across multiple machines, but we still can't take advantage of multiple core CPUs. The results can be joined back together after processing to make a complete simulation. Is there a product out there that would let me "compartmentalize" an installation (or 4) so I can take advantage of a multi-core CPU? I had thought of using MS Softgrid, but I believe that still depends on a remote server to do the heavy lifting (though please correct me if I'm wrong). Furthermore, is there a way I can distribute the workload off the one machine? So an input could be split into 50 chunks, handed out to 50 machines, and worked on? All without really changing the initial application? In a perfect world, I'd get the application to take advantage of a DesktopGrid (BOINC), but like most "mission critical corporate applications", the need is there, but the money is not. Thank you in advance (and sorry if this isn't appropriate for serverfault).

  Read the article

• Certificates required for WHQL-certified drivers

  - by Kasius

  The 64-bit Windows 7 image that we deploy to machines at our site does not contain all of the certificates included on a default Windows image. Automatic root certificate installation is also disabled per policy from higher in the organization. We have had a lot of trouble installing many WHQL-certified drivers from reputable companies (ex. HP, Lexmark, Dell, etc.), and I hypothesize that a required certificate is missing from one of the certificate stores on the machine. The error we typically get is: The driver cannot be installed because it is either not digitally signed or not signed in the appropriate manner. I know that it is signed. A .CAT file is included, and it has the following tree from top to bottom: Microsoft Root Authority (thumbprint a4 34 89 15 9a 52 0f 0d 93 d0 32 cc af 37 e7 fe 20 a8 b4 19) Microsoft Windows Hardware Compatibility PCA (thumbprint 93 b8 d8 82 0a 32 db 20 a5 ea b6 8d 86 ad 67 8e fa 14 ea 41) Microsoft Windows Hardware Compatibility Publisher (thumprint b0 50 45 45 42 4e be 2c 16 2f 62 5b bf 5a e6 9b 96 bf 0b 0b) What certificates are required to install WHQL-certified drivers? Is it possibly something other than certificates? Thanks! NOTE: I have posted this question on Technet as well, but honestly, I've never had a lot of luck posting questions on the Technet forums.

  Read the article

• Login error in phpMyAdmin, problem setting auth_type in config.inc.php

  - by sergiom

  I'm having a problem accessing phpMyAdmin. A few weeks ago I did succeed configuring it for auth_type = 'cookie', but I still receive an error stating that I should have to set blowfish_secret. That was strange because it was set. So I changed auth_type from cookie to http, but it didn't work. I changed it back to cookie, but it doesn't work anymore. this is the error. phpMyAdmin - Error Cannot start session without errors, please check errors given in your PHP and/or webserver log file and configure your PHP installation properly. this is my C:\wamp\apps\phpmyadmin3.2.0.1\config.inc.php <?php /* Servers configuration */ $i = 0; /* Server: localhost [1] */ $i++; $cfg['Servers'][$i]['verbose'] = 'localhost'; $cfg['Servers'][$i]['host'] = 'localhost'; $cfg['Servers'][$i]['port'] = ''; $cfg['Servers'][$i]['socket'] = ''; $cfg['Servers'][$i]['connect_type'] = 'tcp'; $cfg['Servers'][$i]['extension'] = 'mysqli'; $cfg['Servers'][$i]['auth_type'] = 'cookie'; $cfg['Servers'][$i]['user'] = ''; $cfg['Servers'][$i]['password'] = ''; $cfg['Servers'][$i]['AllowNoPassword'] = false; $cfg['Servers'][$i]['blowfish_secret'] = 'this is my passphrase'; /* End of servers configuration */ $cfg['DefaultLang'] = 'en-utf-8'; $cfg['ServerDefault'] = 1; $cfg['UploadDir'] = ''; $cfg['SaveDir'] = ''; ?> I changed the blowfish_secret, since I don't remember the old one, and I deleted the cookies in my browser and restartd all wamp services and the browser. After I enter username and password in the login page I get the error. I've tried searching into the log files, but I'm a newbie and I'm not sure I've searched the right ones. I'm using Wamp server 2.0 that has Apache Version : 2.2.11 PHP Version : 5.3.0 MySQL Version : 5.1.36 phpmyadmin : 3.2.0.1

  Read the article

• Execute remote shell commands on windows XP embedded

  - by BartD

  The following situation: We have Windows XP Embedded clients that have all admin shares disabled and only have read-only shares (for security reasons). What we want to do is run remote shell (dos) commands on these machines. At first we looked at PsExec & BeyondExec applications (and all sorts of variants), but all of them rely on having at least an admin$ share, which are disabled on our systems. Telnet is not secure enough, as is RSHD servers. So we looked at the next obvious solution: and SSH server. We also prefer an open-source or freeware solution that is still maintained. I looked at freeSSH server for Windows, but that didn't run stable, I tried installing copSSH, WinSSH & openSSH for Windows, but none of these applications seem to work on Windows XP Embedded. The services can either not be installed or cannot be started. I don't know why. Some kind of dependency that is missing. So are there any other solutions out there? I don't care about having to an agent installation locally of some kind on each system, as long as the size of the software is small enough. Can someone suggest some alternatives to what I've already mentioned? Thank you very much.

  Read the article

• Windows XP / Outlook 2003 error messages

  - by AboutDev

  Can anyone help with this issue? I am trying to help someone and could use some expertise. Error Message #1: Microsoft Office Small Business Edition 2003 With CD icon "The feature you are trying to use is on a CD-ROM or other removable disk that is not available. Insert the 'Microsoft Office Small Business Edition 2003' disk and click OK. Use source: Microsoft Office Small Business Edition 2003" 1st got this message after CD was inserted to recover partial file STDP11N. Recovered STDP11N, however, still receiving pop up window with error message each time outlook opens. Had accidentally cleaned up old programs and suddenly this was missing. Reinstalled Microsoft Office Small Business Edition 2003 using install CD. Outlook worked buit keep getting error message pop up each time I open Outlook. Hit ok. Error Message #2: The path 'Microsoft Office Small Business Edition 2003' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'STDP11N.MSI' in a folder from which you can install the product Microsoft Office Small Business Edition 2003." Hit ok. Back to error message #1 Hit close window Error message #3: Error 1706. Setup cannot find the required files. Check your connection to the network, or CD-ROM drive. For other potential solutions to this problem, see C:\Program Files\Microsoft Office\ OFFICE11\1033\SETUP.CHM Error message #4 I'd created a file under D: drive on an external drive. "The path specified for the file D:...etc.. .pst is not valid. Hit ok. Brings up window to look in My Documents.

  Read the article

• CLOSE_WAIT sockets burst - perhaps because of iptables settings?

  - by Fabrizio Giudici

  I have an Ubuntu 12.04 server virtual box where basically the installed software and configuration are the default ones, plus the installation of a jetty 6 server which servers a few websites. To keep things simple I didn't install apache httpd and used iptables for exposing jetty (which runs on the 8080 port) to the port 80. These are the results of /sbin/iptables -t nat -L Chain PREROUTING (policy ACCEPT) target prot opt source destination REDIRECT tcp -- anywhere localhost tcp dpt:http redir ports 8080 REDIRECT tcp -- anywhere Ubuntu-1104-natty-64-minimal tcp dpt:http redir ports 8080 Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination REDIRECT tcp -- anywhere localhost tcp dpt:http redir ports 8080 REDIRECT tcp -- anywhere Ubuntu-1104-natty-64-minimal tcp dpt:http redir ports 8080 Chain POSTROUTING (policy ACCEPT) target prot opt source destination I must confess I have a shallow comprehension of how iptables works, in particular for the different kind of chains. This thing works, but sometimes I have an explosion of sockets that stay permanently in CLOSE_WAIT state. I know about what this state means, but since I didn't write the code that manages servlets (they are handled by jetty) I can't fix the problem by patching my code. Eventually the amount of CLOSE_WAIT sockets builds up and makes the server not responsive, so I have to restart jetty. I've looked around for similar problems wth CLOSE_WAIT, and only found cases related to the programmer's code, or problems with Tomcat, not Jetty. I was wondering whether they could be related to a partially broken iptables configuration (the alternative is a bug in Jetty 6, but I first want to exclude other possible causes). Thanks.

  Read the article

• Keyboard doesn't function after Fedora 17 update

  - by mickburkejnr

  I updated my Fedora 16 installation to Fedora 17 on Saturday, and the update worked without reporting any errors. I carried on working on the machine in question and then switched the computer off. Last night I went back on the computer, I switched it on and got to the log in screen. At this point I tried to type in my password but the keyboard wouldn't work. I unplugged it (it's a PS/2 keyboard) and plugged it back in. The lights flashed for a split second but the keyboard still wouldn't work. I then plugged the keybaord in to a USB to PS/2 adapter, and the keyboard still wouldn't work. I restarted the computer and tried to access the BIOS and I was able to do so. So the keyboard doesn't seem to be faulty, it just doesn't work when Fedora boots in to the GUI interface. I did try to boot in to the "recovery mode" of Fedora, and the keyboard works here with no problem. As I still have access to Fedora via a terminal interface, is there anything I can do to fix the keyboard problem via the terminal without having to reinstall Fedora?

  Read the article

• Cloned Win7: Keyboard doesn't work

  - by Marc

  I cloned my old Windows7 hard disk to a shiny new Seagate Momentus XT 500GB using the free EaseUs Disk Copy tool on my laptop. After the clone process I used the Windows 7 installation disc to start the automatic startup repair. This took maybe 15 minutes and then my cloned disk was able to start. Now the cloned disk boots until the login screen and then I can't do anything because my keyboard just doesn't work. I tried connecting an external USB keyboard but this didn't help. The mouse is working fine. Note that the keyboard works fine in BIOS and in the Windows startup options menu. I booted into safe mode and again the keyboard is not working at all. I also noticed that the letters "Press CTRL+ALT+Delete to login" are now shown in italic font but they used to be shown non-italic on the original disk. I have now replaced the clone with the original disk again and from here everything works fine. Doesn't anybody have an idea how I can get my keyboard back?

  Read the article

• Windows 7 Busy Icon won't stop spinning

  - by Lynda

  In windows 7 you have the busy icon that is a little blue wheel spinning beside the cursor when it is doing something. It has started to spin for about a second every 3-5 seconds. There is noting running that I can tell on the computer to cause the busy icon. It gets very annoying and I am not sure what to do to get it to stop. Ideas? Running a CPU Usage Gadget says I have less than 5% of the CPU being use and I have over 6GB of RAM free. (I have 8GB total) I am running a 3.6 GHZ AMD FX 4100 processor. EDIT- What I am actually seeing is the working in background pointer (the pointer is still visible beside the busy icon). EDIT 2 - After realizing this happened with the printer installation I turned on the the printer and the busy icon stopped. The printer is setup wirelessly. How do I stop Windows from (I guess) checking for the printer? That is what I assume it is doing. I am using a HP Officejet 8600

  Read the article

• Failure to connect to admin share pops up dialog

  - by Jan

  I'm having an issue with a curious error message when accessing the administrative share on a remote machine. Specifically, the client is logged in as the domain administrator on the machine A, and runs some code that tries to access the admin share on B (a domain member). The access is done in .NET, along these lines (though I am not sure if the method of access makes a difference): string path = @"\\B\admin$"; if (Directory.Exists(path)) { try { path += @"\temp\"; if (!Directory.Exists(path)) { Directory.CreateDirectory(path); } path += "myfile_remote"; File.Copy("myfile", path); Now, on some machines this fails. That is not a big problem as we have a fallback. I'd like to know why but it is not the real issue. The problem is that running this piece of code causes a dialog box to pop up for the logged-in user on B, saying "network error trying to access \\B\admin$\temp\myfile_remote. Contact the network administrator and ask for the correct permissions". Unfortunately, it is a foreign language Windows so I'll spare you all posting a screenshot. It is skinned like a standard Windows dialog box. Why exactly is that dialog box popping up for the user and is there anything I can do about it? Edit to add: B is a Windows 7 Enterprise installation. The client is not aware of any GPO policies being installed. There is AV from Trend Micro installed.

  Read the article

• Installed Paragon HFS+ for Windows 8, now my pc won't recognize the external firewire drive

  - by Steve

  I'm not incredibly knowledgeable about computers and I really need some help. Just got a Seagate external firewire drive this morning. I downloaded the necessary pc driver (Paragon HFS+ for Windows 8) through their website per the instructions that came with the drive. After installation, I restarted and the pc recognized the firewire drive just fine. About three hours into copying files from my pc to the firewire drive, it gave me an error and told me the files couldn't be copied. When I clicked to get out of the message, the computer crashed. After an hour of it trying to repair itself in safe mode, it restored me to an earlier version before the system crashed. Here's my current dilemma: The Paragon HFS+ is still showing up in my programs as installed, but the Device Manager is not recognizing the drive. When I try to uninstall and reinstall Paragon, it interrupts me with a message saying "The setup must update files or services that cannot be updated while the system is running" and basically gives me the finger. I have no idea what to do now, as it won't let me uninstall and reinstall Paragon, and I have no idea why it crashed my computer in the first place. Is there possibly another Mac - PC firewire driver I can try downloading instead? I really don't know what I'm doing and any help would be greatly appreciated.

  Read the article

• Debian Stable: Can't update kernel, libc won't update.

  - by pascal

  I use Debian Stable (squeeze) on a virtual host where I can't touch the kernel, it's stuck (and will be for some time as support told me) at Linux 2.6.18-028stab070.3 #1 SMP Wed Jul 21 18:33:27 MSD 2010 x86_64 So when I try to update, several packages fail with FATAL: kernel too old for example Preparing to replace libgcc1 1:4.6.0-11 (using .../libgcc1_1%3a4.6.1-1_amd64.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.6.1-1) ... FATAL: kernel too old Segmentation fault dpkg: error processing libgcc1 (--configure): subprocess installed post-installation script returned error exit status 139 and some version chaos ensued: The following packages have unmet dependencies: libc-dev-bin : Depends: libc6 (> 2.13) but 2.11.2-13 is installed libc6 : Depends: libc-bin (= 2.11.2-13) but 2.13-5 is installed libc6-dev : Depends: libc6 (= 2.13-5) but 2.11.2-13 is installed libquadmath0 : Depends: gcc-4.6-base (= 4.6.0-2) but 4.6.0-11 is installed libstdc++6 : Depends: gcc-4.6-base (= 4.6.0-2) but 4.6.0-11 is installed locales : Depends: glibc-2.13-1 What should I do? I want to keep the system up-to-date, so I want to pin as few packets as possible, but I also don't want to have to compile anything manually. Trying to pin the status quo and figured out where the error came from: ldconfig segfaults. -v doesn't print anything more so I can't tell what's the actual problem. # ldconfig FATAL: kernel too old

  Read the article

• SubDomain creation issue.Ubuntu 12.04 Apache 2.22 Webmin

  - by anarchos78

  I have a technical question concerning subdomains. My installation is UBUNTU 12.04 and WEBMIN for administration (using Apache web server). I am trying to create a subdomain to one IP (the domain is www.ithemis.gr and I want to create test.ithemis.gr and/or test1.ithemis.gr) with no success. I think I've tried the right way to set subdomains. The address does not resolving (I have already created DNS records via BIND). Do you have any suggestions? I am very new in server administration. Any help will be greatly appreciated! Apache configuration: In /etc/apache2/sites-available: Conf file:www.ithemis.gr.conf (main website) <VirtualHost 184.171.255.110:80> DocumentRoot /home/ithemis.gr ServerName www.ithemis.gr <Directory "/home/ithemis.gr"> allow from all #Options +Indexes Options +Includes -Indexes </Directory> </VirtualHost> Conf file:www.test.ithemis.gr.conf (subdomain website): <VirtualHost *:80> DocumentRoot /home/test.ithemis.gr ServerName test.ithemis.gr <Directory "/home/test.ithemis.gr"> allow from all Options +Indexes </Directory> </VirtualHost> My DNS records: Master Zone: ithemis.gr Name Type TTL Values ithemis.gr. NS Default ns1.themis.gr. ithemis.gr. A Default 184.171.255.110 ns1.ithemis.gr. A Default 184.171.255.110 ns2.ithemis.gr. A Default 184.171.255.110 mail.ithemis.gr. A Default 184.171.255.110 www.ithemis.gr. CNAME Default ithemis.gr. ithemis.gr. MX Default 5 mail.ithemis.gr. www.test.ithemis.gr. CNAME Default ithemis.gr. test.ithemis.gr. CNAME Default ithemis.gr.

  Read the article

< Previous Page | 513 514 515 516 517 518 519 520 521 522 523 524  | Next Page >