Search Results

Search found 30701 results on 1229 pages for 'visual studio setup proje'.

Page 522/1229 | < Previous Page | 518 519 520 521 522 523 524 525 526 527 528 529  | Next Page >

  • My WD Caviar Green SATA HDD cannot be detected

    - by obhasha
    I have a WD 2TB Caviar Green SATA HDD. I used it as an external hard drive formatted to FAT32. The main purpose was to store my PS3 games. It worked fine and all of a sudden my PS3 stopped detecting it. I tried connecting it to my pc and the same result. I took it off from the enclosure and plugged it directly to my PC and used the BIOS setup. The BIOS setup detects my HDD but it says it's 0.0MB!!! I also tried the WD Data Lifeguard Diagnostic tool and it wasn't much of use because the drive is not picking up by windows at all. Is my HDD dead? Is it beyond repair?

    Read the article

  • ASUS P5B Plus motherboard - no any drives found - how to restore RAID array?

    - by Moha
    We have a small server machine with an ASUS P5B Plus motherboard and 4 SATA HDDs. The HDDs were configured in a RAID10 array. Up until now, everything worked fine, but now the system doesn't recognize the drives. BIOS is set to RAID, jMicron controller is set to RAID, yet I can't see any of the drives in the BIOS setup, and jMicron BIOS tells me "no any drives found" The HDDs all spin up, I hear no clicking sounds or anything that would suggest HDD error. I did a search on this problem and replaced the SATA cables as suggested, but nothing's changed. What I have in mind is checking the CMOS battery and resetting the BIOS to use IDE mode, but I don't know if it will ruin the RAID system on the HDDs. It is not a critical server and there's only one database running on it (which I have backup of), but I don't want to setup the server from scratch if not necessary. What should I try to restore the RAID array and put the server back to working order?

    Read the article

  • Coppock Chart

    This article demonstrates building a web based interactive chart and is my attempt to assimilate some of the recent updates and best practices that have emerged with Visual Studio 2010 and .NET Framework 4 into my software lexicon.

    Read the article

  • How to connect to my US network overseas via VPN?

    - by GiH
    I purchased an Apple TV for my parents and I have a netflix account. My parents live overseas, and I was wondering if they could use my account to get it to work. I read that it won't work unless you use proxies or a VPN, so I was wondering if its possible for me to setup a VPN to my network in the US instead of paying a service like StrongVPN? Setup: Router in US - Airport Extreme Router abroad - D-link (not sure of model) I know that the AppleTV doesn't have a built-in VPN client, maybe eventually when its jailbroken there will be an app, but as of now I'll have to use the routers right? Any other ideas are welcome as well!

    Read the article

  • Run command before and after printing with CUPS?

    - by leto
    Hello, this is a home setup. A central printer server (Linux) manages the queue, a HP 2430DTN is attached to it via 100Mbit/sec Ethernet. The printer is hooked up to a managable power source. A shell script watches the queue on the server (lpstat -o) and turn on the printer when there is a job. If the queue is empty for 10 minutes it turns the printer off. Now this setup messes up, stops the printer etc. after a couple of weeks and is in general "not so reliable". I now know how to change the stop-printer thing, but: Is there a way to run my turn printer on script and turn printer off script directly from cups without watching the queue? That would be so cool!

    Read the article

  • StreamInsight Now Available Through Microsoft Update

    - by Roman Schindlauer
    We are pleased to announce that StreamInsight v1.1 is now available for automatic download and install via Microsoft Update globally. In order to enable agile deployment of StreamInsight solutions, you have asked of us a steady cadence of releases with incremental, but highly impactful features and product improvements. Following our StreamInsight 1.0 launch in Spring 2010, we offered StreamInsight 1.1 in Fall 2010 with implicit compatibility and an upgraded setup to support side by side installs. With this setup, your applications will automatically point to the latest runtime, but you still have the choice to point your application back to a 1.0 runtime if you choose to do so. As the next step, in order to enable timely delivery of our releases to you, we are pleased to announce the support for automatic download and install of StreamInsight 1.1 release via Microsoft Update starting this week. If you have a computer: that is subscribed to Microsoft Update (different from Windows Update) has StreamInsight 1.0 installed, and does not yet have StreamInsight 1.1 installed, Microsoft Update will automatically download and install the corresponding StreamInsight 1.1 update side by side with your existing StreamInsight 1.0 installation – across all supported 32-bit and 64-bit Windows operating systems, across 11 supported languages, and across StreamInsight client and server SKUs. This is also supported in WSUS environments, if all your updates are managed from a corporate server (please talk to the WSUS administrator in your enterprise). As an example, if you have SI Client 1.0 DEU and SI Server 1.0 ENU installed on the same computer, Microsoft Update will selectively download and side-by-side install just the SI Client 1.1 DEU and SI Server 1.1 ENU releases. Going forward, Microsoft Update will be our preferred mode of delivery – in addition to support for our download sites, and media based distribution where appropriate. Regards, The StreamInsight Team

    Read the article

  • Spicing Up Your Web Services with XSLT

    The first thirteen parts of this series introduced some of the many features available within the IBM Data Studio integrated development environment (IDE) that's available for use with the IBM data servers. This installment explains how to apply Extensible Stylesheet Language Transformations (XSLT) to your Web services.

    Read the article

  • How to get a "Maximize" button in every window in GNOME Fallback

    - by RockKeyman
    Just installed Ubuntu 11.10 (AMD64), and immediately switched back to GNOME with GNOME Fallback. I'm searching for a feature which provided a "maximise" button in every window, even ones which should have only the "close" button. In older Ubuntu versions this feature was activated when switching from "None" to "Normal" in "Visual Effects": But now, that window is out, and I can't find that feature. I guess it's somewhere in CompizConfig, but I've searched there with no result. Does anyone know what's the feature I'm searching for?

    Read the article

  • Server 2003 Functional Domain DFS Replication Problem (Files being moved to conflicted folder for no reason)

    - by Az
    We have 2 Windows 2003 servers configured with a DFS namespace and we are running into problems with the redirected profiles we have setup. Basically, one server is the FSMO master for all roles, and we have another DC that is the DFS namespace primary server. We have profile redirection setup using the \dfsnamespace\userprofile formula. The FSMO master DC locks up occasionally (don't ask :), and when it does, and we bring it back up... All of the user profiles hosted on the DFS namespace get overwritten when a user logs in. The current profile gets moved to the conflicting and deleted items folder. This strikes me as really odd considering the whole point of using DFS was to provide some redundancy in case one server went down. Can anyone help? Thanks in advance! -Nate

    Read the article

  • Is there anyway I can secure my connection when I try to log in to my router from remotely?

    - by HardwareMuch
    I'm trying to configure my desktop to be accessed remotely. Here's what I've done so far: enabled wake on lan / remote wake up on all interfaces. I'm using logmein as my remote desktop application. setup DDNS so that I can log in to my router. When I try to remotely log in to my router it says that it is not encrypted there anyone can see my log in information. What can I do to make this a more secure setup? Any other suggestions or different methods will be greatly appreciated.

    Read the article

  • Uninstall nginx on Ubuntu 10.04.3 LTS remote machine

    - by user831740
    I was given a server to setup, problem is this server was no reset, and the provider is quite slow on resetting it, so I have to completely uninstall some stuff it has, one of which is nginx. I had a few problems when doing setup on my local machine for nginx due to multiple installations of it, so I want to avoid the same mistake now. Problem is, I got no idea how nginx was installed here, and I need to remove it. When I access the server thro SSH i only have this folder $HOME/backups/nginx any idea how to uninstall this? Whenever I google it only come up with apt-get uninstall and so forth. Thank you

    Read the article

  • How to connect to my US network overseas via VPN?

    - by GiH
    I purchased an Apple TV for my parents and I have a netflix account. My parents live overseas, and I was wondering if they could use my account to get it to work. I read that it won't work unless you use proxies or a VPN, so I was wondering if its possible for me to setup a VPN to my network in the US instead of paying a service like StrongVPN? Setup: Router in US - Airport Extreme Router abroad - D-link (not sure of model) I know that the AppleTV doesn't have a built-in VPN client, maybe eventually when its jailbroken there will be an app, but as of now I'll have to use the routers right? Any other ideas are welcome as well!

    Read the article

  • Pizza and IntelliTrace at NextGenUG on 16 and 23 October 2012

    - by Tarun Arora
    Free Pizza and a session on diagnosing Production bugs using IntelliTrace. I’ll be presenting a session at the Next Gen User Group and you are more than welcome to join in, 16th October at Oxford – http://www.nxtgenug.net/ViewEvent.aspx?EventID=540  23rd October at Birmingham – http://www.nxtgenug.net/ViewEvent.aspx?EventID=524  I’ll be showing off the how IntelliTrace stand alone collector and Visual Studio stand alone profiler can help. See you there

    Read the article

  • Reasons to Use a VM For Development

    - by George Stocker
    Background: I work at a start-up company, where one team uses Virtual Machines to connect to a remote server to do their development, and another team (the team I'm on) uses local IIS/SQL Server 2005/Visual Studio installations to conduct work. Team VM is located about 1000 miles from Team Non-VM, and the servers the VMs run off of are located near Team VM (Latency, for those that are wondering, is about 50ms). A person high in the company is pushing for Team Non-VM to use virtual machines for programming, development, and testing. The latter point we agree on -- we want Virtual Machines to test configurations and various aspects of the web application in a 'clean' state. The Problem: What we don't agree on is having developers using RDP to connect to a desktop remotely that contains Visual Studio, SQL Server, and IIS to do the same development we could do locally on our laptops. I've tried the VM set-up, and besides the color issue, there is a latency issue that is rather noticeable, not to mention that since we're a start-up, a good number of employees work from home on occasion with our work laptops, and this move would cut off the laptops. They'd be turned in. Reasons to Use Remote VMs for Development (Not Testing!): Here are the stated reasons that this person wants us to use VMs: They work for TeamVM. They keep the source code "safe". If we want to work from home, we could just use our home PCs. Licenses (I don't know what the argument is, only that it's been used). Reasons not to use Remote VMs for Development: Here are the stated reasons why we don't want to use VMs: We like working from home. We get a lot done on our own time. We're not going to use our Home PCs to do work related stuff. The Latency is noticeable. Support for the VMs (if they go down, or if we need a new VM) takes a while. We don't have administrative privileges on the VM, and are unable to change settings as needed. What I'm looking for from the community is this: What reasons would you give for not using VMs for development? Keep in mind these are remote VMs -- this isn't a VM running on a local desktop. It's using the laptop (or a desktop) as a thin client for a remote VM. Also, on the other side of the coin: Is there something we're missing that makes VMs more palatable for development? Edit: I think 'safe' is used in term of corporate espionage, or more correctly if the Laptop gets stolen, the person who stole would have access to our source code. The former (as we've pointed out, is always going to be a possibility -- companies stop that with litigation, there isn't a technical solution (so far as I can see)). The latter point is ( though I don't know its usefulness in a corporate scenario) mitigated by Truecrypt'ing the entire volume.

    Read the article

  • Webinar: Whatever your source control system - seamlessly link it to SQL Server

    In this webinar consisting of 30 minutes of software demonstrations followed by Q&A, you will learn how to link your database to your existing source control system within SQL Server Management Studio using Red Gate’s SQL Source Control. We will also give you an exclusive preview of forthcoming custom scripts features in the next version of SQL Source Control and SQL Compare. Get smart with SQL Backup ProPowerful centralised management, encryption and more.SQL Backup Pro was the smartest kid at school. Discover why.

    Read the article

  • Cheap machine with Xen to have more than one personal dev servers with RAID option?

    - by AJ
    I do not have a lot of money so when I need a personal dev servers I decided I will use Xen on one machine to run various OS's. Although, I really like Dell Zino (http://www.dell.com/us/en/home/desktops/inspiron-zino-hd/pd.aspx?refid=inspiron-zino-hd&cs=19&s=dhs) as a very economical and compact PC which can be scaled to 8GB of RAM, I do not know how to have a RAID setup, for the backup. Is there an economical way to add a RAID setup to Dell Zino or I would have to invest in a proper box for that? Thanks for your help in advance. **Also, please let me know if this question is not meant for this forum.

    Read the article

  • MySQL Workbench 6.2.1 BETA has been released

    - by user12602715
    The MySQL Workbench team is announcing availability of the first beta release of its upcoming major product update, MySQL  Workbench 6.2. MySQL Workbench 6.2 focuses on support for innovations released in MySQL 5.6 and MySQL 5.7 DMR (Development Release) as well as MySQL Fabric 1.5, with features such as: A new spatial data viewer, allowing graphical views of result sets containing GEOMETRY data and taking advantage of the new GIS capabilities in MySQL 5.7. Support for new MySQL 5.7.4 SQL syntax and configuration options. Metadata Locks View shows the locks connections are blocked or waiting on. MySQL Fabric cluster connectivity - Browsing, view status, and connect to any MySQL instance in a Fabric Cluster. MS Access migration Wizard - easily move to MySQL Databases. Other significant usability improvements were made, aiming to raise productivity for advanced and new users: Direct shortcut buttons to commonly used features in the schema tree. Improved results handling. Columns have better auto-sizing and their widths are saved. Fonts can also be customized. Results "pinned" to persist viewing data. A convenient Run SQL Script command to directly execute SQL scripts, without loading them first. Database Modeling has been updated to allow changes to the formatting of note objects and attached SQL scripts can now be included in forward engineering and synchronization scripts. Integrated Visual Explain within the result set panel. Visual Explain drill down for large to very large explain plans. Shared SQL snippets in the SQL Editor, allowing multiple users to share SQL code by storing it within a MySQL instance. And much more. The list of provided binaries was updated and MySQL Workbench binaries now available for: Windows 7 or newer Mac OS X Lion or newer Ubuntu 12.04 LTS and Ubuntu 14.04 Fedora 20 Oracle Linux 6.5 Oracle Linux 7 Sources for building in other Linux distributions For the full list of changes in this revision, visit http://dev.mysql.com/doc/relnotes/workbench/en/changes-6-2.html For discussion, join the MySQL Workbench Forums: http://forums.mysql.com/index.php?151 Download MySQL Workbench 6.2.1 now, for Windows, Mac OS X 10.7+, Oracle Linux 6 and 7, Fedora 20, Ubuntu 12.04 and Ubuntu 14.04 or sources, from: http://dev.mysql.com/downloads/tools/workbench/ On behalf of the MySQL Workbench and the MySQL/ORACLE RE Team.

    Read the article

  • Apt Stalls When Using HTTP Sources

    - by UltraNurd
    I was getting some to me inexplicable behavior from apt-get/aptitude on an admittedly crusty old webserver. While it was otherwise running fine, as soon as I tried a package upgrade, after a downloading a few updates it would stall completely, then my SSH session hung (and I was unable to reconnect), thus requiring a hard restart. First, I switched to a different package source in /etc/apt/sources.list, but still got the same behavior. At this point I was assuming the NIC was dying in some weird way... but as soon as I changed the package source to use FTP instead of HTTP, everything worked fine, and I was able to upgrade. For now I'm not too concerned since I have an easy work around, but it implies that there's something very weird with my network setup, since it seems to be protocol (or port?) specific. I didn't think any of my NAT setup would affect outbound traffic, but I could be crazy. Any ideas what I should try to look for?

    Read the article

  • esx 4 - c7000 - cisco 3020

    - by gdavid
    I have 4 blades with esx 4 installed in a HP c7000 enclosure. They have 6 cisco 3020 for hp switches in the backend. The plan was to use 2 switches for iSCSI traffic and the other 4 for data traffic. I am having a problem trunking the switches to our existing environment. The documentation i keep finding online has commands/features that are not available on the 3020 switch. Does anyone have this setup anywhere? I am looking to do Virtual Switch Tagging (VST) so i can control the machines vlan via the port groups. The only time any configuration worked for us was when our network team placed the command switchport native vlan x this setup only allowed vlan x to pass traffic and only when the port group was in vlan 0. Ideas? thanks for any help. -GD

    Read the article

  • YouTube: Realtime Graph Sharing on the NetBeans Platform

    - by Geertjan
    Yet another really cool movie by the Maltego team in South Africa, this time showing Visual Library widgets in their NetBeans Platform application shared in realtime between different users of the Maltego open source intelligence gathering and analytics software: What you see above is Maltego CaseFile. Below you find out more about it in the latest blog entry on the Maltego site: http://maltego.blogspot.be/2013/11/maltego-casefile-v2-released.html

    Read the article

  • Nested %..% representation in Windows 7

    - by prosseek
    In order to organize the PATH environment, I came up with the following method. Setup variable : ABC = "PATH1;PATH2" Set the path variable using the predefined setup variable : Path = %ABC%%DEF% ... It seems to work fine, but I found that some of the variables are not transfomred into real paths when I run the set command. (I mean, the PATH=PATH1;PATH2;%DEF%, for example). What I found was as follows. If the variable name has '_', Windows can't transform it. If the variable has the path with %...% variable, windows can't transform it. Q1 : Am I correct? Q2 : If so, is there a way to by pass the nested %...% varibale problem?

    Read the article

  • Dual Touchscreens in Different Rooms

    - by Ash
    I'm planning on having one dual-core system running two touchscreens, each in its own room in the house. I'd like to be able to use the internet on one, while someone else uses the other to record music - each of us interacting with the screen as we would separate computers. I was also thinking that running each screen, or certain programs, on its own core might make this work more smoothly. Will this setup work in Windows 7 Home on a mini-tower or do I need to invest in a server to get this sort of workstation/terminal setup to work?

    Read the article

  • Solving the SQL Server Multiple Cascade Path Issue with a Trigger

    This tip will look at how you can use triggers to replace the functionality you get from the ON DELETE CASCADE option of a foreign key constraint. Keep your database and application development in syncSQL Connect is a Visual Studio add-in that brings your databases into your solution. It then makes it easy to keep your database in sync, and commit to your existing source control system. Find out more.

    Read the article

  • Just how slow should my VPN be?

    - by David Heggie
    I have a VPN setup between a remote office with 2 ADSL connections (8Mb downstream, 512Kb upstream) and a main office with a 10Mb EFM connection (10Mb both up and down). The VPN is an IPSec connection using a DrayTek 2930 router for the ADSL and a DrayTek 3200 router at the EFM end. However, I'm unable to get speeds over this connection (tested with iperf) of anything over 600Kb or so down from the main office (traffic will pretty much always be from the main office to the remote office) Whilst I realise that there is an overhead and I'm never going to get the "full" bandwidth available over this VPN, I'd like to think that there's something I should be looking at that may help improve it. I've tried using the DrayTek's built-in "VPN Trunking" features which are supposed to load-balance connections, but this doesn't seem to improve matters much. I guess my question is - is this the kind of performance I should expect from this kind of setup and I'll just have to live with it, or should I be able to squeeze something more out of it through some VPN magic?

    Read the article

  • Understanding the Microsoft Permissive License

    - by cable729
    I want to use certain parts of the Game State Management Example in a game I'm making, but I'm not sure how to do this legally. It says in the license that I'm supposed to include a copy of the license with it. So if I make a Visual Studio Solution, I just add the license.txt to the solution? Also, if I use a class and change it, do I have to keep the license info at the top or add that I changed it or what?

    Read the article

< Previous Page | 518 519 520 521 522 523 524 525 526 527 528 529  | Next Page >