Search Results

Search found 32277 results on 1292 pages for 'module development'.

Page 524/1292 | < Previous Page | 520 521 522 523 524 525 526 527 528 529 530 531  | Next Page >

• How to properly do weapon cool-down reload timer in multi-player laggy environment?

  - by John Murdoch

  I want to handle weapon cool-down timers in a fair and predictable way on both client on server. Situation: Multiple clients connected to server, which is doing hit detection / physics Clients have different latency for their connections to server ranging from 50ms to 500ms. They want to shoot weapons with fairly long reload/cool-down times (assume exactly 10 seconds) It is important that they get to shoot these weapons close to the cool-down time, as if some clients manage to shoot sooner than others (either because they are "early" or the others are "late") they gain a significant advantage. I need to show time remaining for reload on player's screen Clients can have clocks which are flat-out wrong (bad timezones, etc.) What I'm currently doing to deal with latency: Client collects server side state in a history, tagged with server timestamps Client assesses his time difference with server time: behindServerTimeNs = (behindServerTimeNs + (System.nanoTime() - receivedState.getServerTimeNs())) / 2 Client renders all state received from server 200 ms behind from his current time, adjusted by what he believes his time difference with server time is (whether due to wrong clocks, or lag). If he has server states on both sides of that calculated time, he (mostly LERP) interpolates between them, if not then he (LERP) extrapolates. No other client-side prediction of movement, e.g., to make his vehicle seem more responsive is done so far, but maybe will be added later So how do I properly add weapon reload timers? My first idea would be for the server to send each player the time when his reload will be done with each world state update, the client then adjusts it for the clock difference and thus can estimate when the reload will be finished in client-time (perhaps considering also for latency that the shoot message from client to server will take as well?), and if the user mashes the "shoot" button after (or perhaps even slightly before?) that time, send the shoot event. The server would get the shoot event and consider the time shot was made as the server time when it was received. It would then discard it if it is nowhere near reload time, execute it immediately if it is past reload time, and hold it for a few physics cycles until reload is done in case if it was received a bit early. It does all seem a bit convoluted, and I'm wondering whether it will work (e.g., whether it won't be the case that players with lower ping get better reload rates), and whether there are more elegant solutions to this problem.

  Read the article

• Smooth waypoint traversing

  - by TheBroodian

  There are a dozen ways I could word this question, but to keep my thoughts in line, I'm phrasing it in line with my problem at hand. So I'm creating a floating platform that I would like to be able to simply travel from one designated point to another, and then return back to the first, and just pass between the two in a straight line. However, just to make it a little more interesting, I want to add a few rules to the platform. I'm coding it to travel multiples of whole tile values of world data. So if the platform is not stationary, then it will travel at least one whole tile width or tile height. Within one tile length, I would like it to accelerate from a stop to a given max speed. Upon reaching one tile length's distance, I would like it to slow to a stop at given tile coordinate and then repeat the process in reverse. The first two parts aren't too difficult, essentially I'm having trouble with the third part. I would like the platform to stop exactly at a tile coordinate, but being as I'm working with acceleration, it would seem easy to simply begin applying acceleration in the opposite direction to a value storing the platform's current speed once it reaches one tile's length of distance (assuming that the tile is traveling more than one tile-length, but to keep things simple, let's just assume it is)- but then the question is what would the correct value be for acceleration to increment from to produce this effect? How would I find that value?

  Read the article

• Circle-Rectangle collision in a tile map game

  - by furiousd

  I am making a 2D tile map based putt-putt game. I have collision detection working between the ball and the walls of the map, although when the ball collides at the meeting point between 2 tiles I offset it by 0.5 so that it doesn't get stuck in the wall. This aint a huge issue though. if(y % 20 == 0) { y+=0.5; } if(x % 20 == 0) { x+=0.5; } Collisions work as follows Find the closest point between each tile and the center of the ball If distance(ball_x, ball_y, close_x, close_y) <= ball_radius and the closest point belongs to a solid object, collision has occured Invert X/Y speed according to side of object collided with The next thing I tried to do was implement floating blocks in the middle of the map for the ball to bounce off of. When a ball collides with a corner of the block, it gets stuck in it. So I changed my determineRebound() function to treat corners as if they were circles. Here's that functon: `i and j are indexes of the solid object in the 2d map array. x & y are centre point of ball.` void determineRebound(int _i, int _j) { if(y > _i*tile_w && y < _i*tile_w + tile_w) { //Not a corner xs*=-1; } else if(x > _j*tile_w && x < _j*tile_w + tile_w) { //Not a corner ys*=-1; } else { //Corner float nx = x - close_x; float ny = y - close_y; float len = sqrt(nx * nx + ny * ny); nx /= len; ny /= len; float projection = xs * nx + ys * ny; xs -= 2 * projection * nx; ys -= 2 * projection * ny; } } This is where things have gotten messy. Collisions with 'floating' corners work fine, but now when the ball collides near the meeting point of 2 tiles, it detects a corner collision and does not rebound as expected. I'm a bit in over my head at this point. I guess I'm wondering if I'm going about making this sort of game in the right way. Is a 2d tile map the way to go? If so, is there a problem with my collision logic and where am I going wrong? Any advice/feedback would be great.

  Read the article

• Projectiles in tile mapped turn-based tactics game?

  - by Petteri Hietavirta

  I am planning to make a Laser Squad clone and I think I have most of the aspects covered. But the major headache is the projectiles shot/thrown. The easy way would be to figure out the probability of hit and just mark miss/hit. But I want to be able to have the projectile to hit something eventually (collateral damage!). Currently everything is flat 2D tile map and there would be full (wall, door) and half height (desk, chair, window) obstacles. My idea is to draw an imaginary line from the shooter to the target and add some horizontal&vertical error based on the player skills. Then I would trace the modified path until it hits something. This is basically what the original Laser Squad seems to do. Can you recommend any algorithms or other approaches for this?

  Read the article

• The practical cost of swapping effects

  - by sebf

  Hello, I use XNA for my projects and on those forums I sometimes see references to the fact that swapping an effect for a mesh has a relatively high cost, which surprises me as I thought to swap an effect was simply a case of copying the replacement shader program to the GPU along with appropriate parameters. I wondered if someone could explain exactly what is costly about this process? And put, if possible, 'relatively' into context? For example say I wanted to use a short shader to help with picking, I would: Change the effect on every object, calculting a unique color to identify it and providing it to the shader. Draw all the objects to a render target in memory. Get the color from the target and use it to look up the selected object. What portion of the total time taken to complete that process would be spent swapping the shaders? My instincts would say that rendering the scene again, no matter how simple the shader, would be an order of magnitude slower than any other part of the process so why all the concern over effects?

  Read the article

• Issues glVertexAttribPointer last 2 parameters?

  - by NoobScratcher

  Introduction Hello I will start out by explaining my setup, showing samples as I go along explaining the situation. I'm using these tools: OpenGL 3.3 GLSL 330 C++ Problem The problem is when I render the wavefront obj 3d model it gives a very weird visual glitch the model was supposed to be a square but instead its a triangluated mess with parts of the vertexes pointing in a stretched direction in massive amounts towards the bottom left side of the frustum.... Explanation: I'm using std::vectors to store my wavefront .obj model data using sscanf to get the floating point values into the structure members x,y,z and store them into the Points structure variable p; int index = IndexAssigner(1, 1); ifstream file (list[index].c_str() ); points.push_back(Point()); Point p; int face[4]; while (!file.eof() ) { char modelbuffer[10000]; file.getline(modelbuffer, 10000); switch(modelbuffer[0]) { case 'v' : sscanf(modelbuffer, "v %f %f %f", &p.x, &p.y, &p.z); points.push_back(p); break; case 'f': sscanf(modelbuffer, "f %d %d %d %d", face, face+1, face+2, face+3 ); faces.push_back(face[0]); faces.push_back(face[1]); faces.push_back(face[2]); faces.push_back(face[3]); } //Turn on FileReader aka "RENDER CODE" FileReader = true; } then I render the Points vector using the .data() member of std::vectors to the frustum. Other declarations: int numfloats = 4; float* point=reinterpret_cast<float*>(&points[0]); int num_bytes=numfloats*sizeof(float); Vector declarations: struct Point {float x, y , z; }; std::vector<int>faces; std::vector<Point>points; Render code: glGenBuffers(1, &vertexbuffer); glGenTextures(1, &ModelTexture); glBindBuffer(GL_ARRAY_BUFFER, vertexbuffer); glBindTexture(GL_TEXTURE_3D, ModelTexture); glTexImage2D(GL_TEXTURE_2D, 0,GL_RGBA, ModelSurface->w, ModelSurface->h, 0, GL_BGR, GL_UNSIGNED_BYTE, ModelSurface->pixels); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glBufferData(GL_ARRAY_BUFFER, sizeof(points), points.data(), GL_STATIC_DRAW); glVertexAttribPointer(3, 3, GL_FLOAT, GL_FALSE,num_bytes ,points.data()); glEnableVertexAttribArray(3); //Translation Process GLfloat TranslationMatrix[] = { 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 1.0, 0.0, 0.0, 0.0, 1.0 }; //Send Translation Matrix up to the vertex shader glUniformMatrix4fv(translation, 1, TRUE, TranslationMatrix); glDrawElements( GL_QUADS, faces.size(), GL_UNSIGNED_INT, faces.data()); I tried looking at what was causing this and went through every function every parameter ,etc looked at the man pages. Then found out that it could be my glVertexAttribPointer. Here are the man pages for glVertexAttribPointer http://www.opengl.org/sdk/docs/man/xhtml/glVertexAttribPointer.xml The last 2 parameters is my problem How do I write those 2 last parameters do I try putting the data from Points into it?. glVertexAttribPointer(3, 3, GL_FLOAT, GL_FALSE,num_bytes ,points.data()); How does it work with vectors? Is it fast?* if you can not be bothered too look at the man pages here is the scripts coming from the man pages directly. Stride Specifies the byte offset between consecutive generic vertex attributes. If stride is 0, the generic vertex attributes are understood to be tightly packed in the array. The initial value is 0. Pointer Specifies a pointer to the first component of the first generic vertex attribute in the array. The initial value is 0. If you want my full source - http://ideone.com/fPfkg Thanks Again if you do read this.

  Read the article

• Zoom Layer centered on a Sprite

  - by clops

  I am in process of developing a small game where a space-ship travels through a layer (doh!), in some situations the spaceship comes close to an enemy space ship, and the whole layer is zoomed in on the two with the zoom level being dependent on the distance between the ship and the enemy. All of this works fine. The main question, however, is how do I keep the zoom being centered on the center point between the two space-ships and make sure that the two are not off-screen? Currently I control the zooming in the GameLayer object through the update method, here is the code (there is no layer repositioning here yet): -(void) prepareLayerZoomBetweenSpaceship{ CGPoint mainSpaceShipPosition = [mainSpaceShip position]; CGPoint enemySpaceShipPosition = [enemySpaceShip position]; float distance = powf(mainSpaceShipPosition.x - enemySpaceShipPosition.x, 2) + powf(mainSpaceShipPosition.y - enemySpaceShipPosition.y,2); distance = sqrtf(distance); /* Distance > 250 --> no zoom Distance < 100 --> maximum zoom */ float myZoomLevel = 0.5f; if(distance < 100){ //maximum zoom in myZoomLevel = 1.0f; }else if(distance > 250){ myZoomLevel = 0.5f; }else{ myZoomLevel = 1.0f - (distance-100)*0.0033f; } [self zoomTo:myZoomLevel]; } -(void) zoomTo:(float)zoom { if(zoom > 1){ zoom = 1; } // Set the scale. if(self.scale != zoom){ self.scale = zoom; } } Basically my question is: How do I zoom the layer and center it exactly between the two ships? I guess this is like a pinch zoom with two fingers!

  Read the article

• One True Event Loop

  - by CyberShadow

  Simple programs that collect data from only one system need only one event loop. For example, Windows applications have the message loop, POSIX network programs usually have a select/epoll/etc. loop at their core, pure SDL games use SDL's event loop. But what if you need to collect events from several subsystems? Such as an SDL game which doesn't use SDL_net for networking. I can think of several solutions: Polling (ugh) Put each event loop in its own thread, and: Send messages to the main thread, which collects and processes the events, or Place the event-processing code of each thread in a critical section, so that the threads can wait for events asynchronously but process them synchronously Choose one subsystem for the main event loop, and pass events from other subsystems via that subsystem as custom messages (for example, the Windows message loop and custom messages, or a socket select() loop and passing events via a loopback connection). Option 2.1 is more interesting on platforms where message-passing is a well-developed threading primitive (e.g. in the D programming language), but 2.2 looks like the best option to me.

  Read the article

• How do they keep track of the NPCs in Left 4 Dead?

  - by f20k

  How do they keep track of the NPC zombies in Left 4 Dead? I am talking about the NPCs that just walk into walls or wander around aimlessly. Even though the players cannot see them, they are there (say inside rooms or behind doors). Let's say there's about 10 or so zombies in a hallway and inside rooms. Does the game keep all of those zombies in a list and iterate through giving them commands? Do they just spawn when the user is within a certain radius or reached a special location? Say you placed the 4 units (controlled by players) on completely different places throughout the map. Let's assume you aren't being swarmed and then you have not killed any of these aimless NPCs. Would the game be keeping track of 10 x 4 = 40 zombies in total? Or is my understanding completely off? The reason I ask is if I were to implement something similar on a mobile device, keeping track of 40 or more NPCs might not be such a great idea.

  Read the article

• OpenGL textures trigger error 1281 if SFML is not called

  - by user3714670

  I am using SOIL to apply textures to VBOs, without textures i could change the background and display black (default color) vbos easily, but now with textures, openGL is giving an error 1281, the background is black and some textures are not applied. but the first texture IS applied (nothing else is working though). The strange thing is : if i create a dummy texture with SFML in the same program, all other textures do work. So i guess there is something i forgot in the texture creation/application, if someone could enlighten me. Here is the code i use to load textures, once loaded it is kept in memory, it mostly comes from the example of SOIL : texture = SOIL_load_OGL_single_cubemap( filename, SOIL_DDS_CUBEMAP_FACE_ORDER, SOIL_LOAD_AUTO, SOIL_CREATE_NEW_ID, SOIL_FLAG_POWER_OF_TWO | SOIL_FLAG_MIPMAPS | SOIL_FLAG_DDS_LOAD_DIRECT ); if( texture > 0 ) { glEnable( GL_TEXTURE_CUBE_MAP ); glEnable( GL_TEXTURE_GEN_S ); glEnable( GL_TEXTURE_GEN_T ); glEnable( GL_TEXTURE_GEN_R ); glTexGeni( GL_S, GL_TEXTURE_GEN_MODE, GL_REFLECTION_MAP ); glTexGeni( GL_T, GL_TEXTURE_GEN_MODE, GL_REFLECTION_MAP ); glTexGeni( GL_R, GL_TEXTURE_GEN_MODE, GL_REFLECTION_MAP ); glBindTexture( GL_TEXTURE_CUBE_MAP, texture ); std::cout << "the loaded single cube map ID was " << texture << std::endl; } else { std::cout << "Attempting to load as a HDR texture" << std::endl; texture = SOIL_load_OGL_HDR_texture( filename, SOIL_HDR_RGBdivA2, 0, SOIL_CREATE_NEW_ID, SOIL_FLAG_POWER_OF_TWO | SOIL_FLAG_MIPMAPS ); if( texture < 1 ) { std::cout << "Attempting to load as a simple 2D texture" << std::endl; texture = SOIL_load_OGL_texture( filename, SOIL_LOAD_AUTO, SOIL_CREATE_NEW_ID, SOIL_FLAG_POWER_OF_TWO | SOIL_FLAG_MIPMAPS | SOIL_FLAG_DDS_LOAD_DIRECT ); } if( texture > 0 ) { // enable texturing glEnable( GL_TEXTURE_2D ); // bind an OpenGL texture ID glBindTexture( GL_TEXTURE_2D, texture ); std::cout << "the loaded texture ID was " << texture << std::endl; } else { glDisable( GL_TEXTURE_2D ); std::cout << "Texture loading failed: '" << SOIL_last_result() << "'" << std::endl; } } and how i apply it when drawing : GLuint TextureID = glGetUniformLocation(shaderProgram, "myTextureSampler"); if(!TextureID) cout << "TextureID not found ..." << endl; // glEnableVertexAttribArray(TextureID); glActiveTexture(GL_TEXTURE0); if(SFML) sf::Texture::bind(sfml_texture); else { glBindTexture (GL_TEXTURE_2D, texture); // glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, 1024, 768, 0, GL_RGB, GL_UNSIGNED_BYTE, &texture); } glUniform1i(TextureID, 0); I am not sure that SOIL is adapted to my program as i want something as simple as possible (i used sfml's texture object which was the best but i can't anymore), but if i can get it to work it would be great.

  Read the article

• Retrieving snapshots of game statistics

  - by SatheeshJM

  What is a good architecture for storing game statistics, so that I can retrieve snapshots of it at various moments? Say I have a game, and the user's statistics initially are: { hours_played = 0, games_played = 0, no_of_times_killed = 0, } When the user purchases something for the first time from within the game, the stats are { hours_played = 10, games_played = 2, no_of_times_killed = 5, } And when he purchases something for the second time, the stats are { hours_played = 20, games_played = 4, no_of_times_killed = 10, } Let me name the events as "purchase1" and "purchase2" How do I model my statistics, so that at any point in the future, I will be able to retrieve the snapshot of the statistics at the time when "purchase1" was fired. Similarly for "purchase2" and any other event I will add. Hope that made sense..

  Read the article

• Unable to Call Instantiate in Class Member Function

  - by onguarde

  The following javascript is attached to a gameObject. var instance : GameObject; class eg_class { function eg_func(){ var thePrefab : GameObject; instance = Instantiate(thePrefab); } } Error, Unknown identifier: 'instance'. Unknown identifier: 'Instantiate'. Questions, 1) Why is it that "instance" cannot be accessed within a class? Isn't it supposed to be a public variable? 2) "Instantiate" function works in Start()/Update() root functions. Is there a way to make it work from within member functions? Thanks in advance!

  Read the article

• Issue with a point coordinates, which creates an unwanted triangle

  - by Paul

  I would like to connect the points from the red path, to the y-axis in blue. I figured out that the problem with my triangles came from the first point (V0) : it is not located where it should be. In the console, it says its location is at 0,0, but in the emulator, it is not. The code : for(int i = 1; i < 2; i++) { CCLOG(@"_polyVertices[i-1].x : %f, _polyVertices[i-1].y : %f", _polyVertices[i-1].x, _polyVertices[i-1].y); CCLOG(@"_polyVertices[i].x : %f, _polyVertices[i].y : %f", _polyVertices[i].x, _polyVertices[i].y); ccDrawLine(_polyVertices[i-1], _polyVertices[i]); } The output : _polyVertices[i-1].x : 0.000000, _polyVertices[i-1].y : 0.000000 _polyVertices[i].x : 50.000000, _polyVertices[i].y : 0.000000 And the result : (the layer goes up, i could not take the screenshot before the layer started to go up, but the first red point starts at y=0) : Then it creates an unwanted triangle when the code continues : Would you have any idea about this? (So to force the first blue point to start at 0,0, and not at 50,0 as it seems to be now) Here is the code : - (void)generatePath{ float x = 50; //first red point float y = 0; for(int i = 0; i < kMaxKeyPoints+1; i++) { if (i<3){ _hillKeyPoints[i] = CGPointMake(x, y); x = 150 + (random() % (int) 30); y += -40; } else if(i<20){ //going right _hillKeyPoints[i] = CGPointMake(x, y); x += (random() % (int) 30); y += -40; } else if(i<25){ //stabilize _hillKeyPoints[i] = CGPointMake(x, y); x = 150 + (random() % (int) 30); y += -40; } else if(i<30){ //going left _hillKeyPoints[i] = CGPointMake(x, y); //x -= (random() % (int) 10); x = 150 + (random() % (int) 30); y += -40; } else { //back to normal _hillKeyPoints[i] = CGPointMake(x, y); x = 150 + (random() % (int) 30); y += -40; } } } -(void)generatePolygons{ static int prevFromKeyPointI = -1; static int prevToKeyPointI = -1; // key points interval for drawing while (_hillKeyPoints[_fromKeyPointI].y > -_offsetY+winSizeTop) { _fromKeyPointI++; } while (_hillKeyPoints[_toKeyPointI].y > -_offsetY-winSizeBottom) { _toKeyPointI++; } if (prevFromKeyPointI != _fromKeyPointI || prevToKeyPointI != _toKeyPointI) { _nPolyVertices = 0; float x1 = 0; int keyPoints = _fromKeyPointI; for (int i=_fromKeyPointI; i<_toKeyPointI; i++){ //V0: at (0,0) _polyVertices[_nPolyVertices] = CGPointMake(x1, y1); //first blue point _polyTexCoords[_nPolyVertices++] = CGPointMake(x1, y1); //V1: to the first "point" _polyVertices[_nPolyVertices] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); _polyTexCoords[_nPolyVertices++] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); keyPoints++; //from point at index 0 to 1 //V2, same y as point n°2: _polyVertices[_nPolyVertices] = CGPointMake(0, _hillKeyPoints[keyPoints].y); _polyTexCoords[_nPolyVertices++] = CGPointMake(0, _hillKeyPoints[keyPoints].y); //V1 again _polyVertices[_nPolyVertices] = _polyVertices[_nPolyVertices-2]; _polyTexCoords[_nPolyVertices++] = _polyVertices[_nPolyVertices-2]; //V2 again _polyVertices[_nPolyVertices] = _polyVertices[_nPolyVertices-2]; _polyTexCoords[_nPolyVertices++] = _polyVertices[_nPolyVertices-2]; //CCLOG(@"_nPolyVertices V2 again : %i", _nPolyVertices); //V3 = same x,y as point at index 1 _polyVertices[_nPolyVertices] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); _polyTexCoords[_nPolyVertices] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); y1 = _polyVertices[_nPolyVertices].y; _nPolyVertices++; } prevFromKeyPointI = _fromKeyPointI; prevToKeyPointI = _toKeyPointI; } } - (void) draw { //RED glColor4f(1, 1, 1, 1); for(int i = MAX(_fromKeyPointI, 1); i <= _toKeyPointI; ++i) { glColor4f(1.0, 0, 0, 1.0); ccDrawLine(_hillKeyPoints[i-1], _hillKeyPoints[i]); } //BLUE glColor4f(0, 0, 1, 1); for(int i = 1; i < 2; i++) { CCLOG(@"_polyVertices[i-1].x : %f, _polyVertices[i-1].y : %f", _polyVertices[i-1].x, _polyVertices[i-1].y); CCLOG(@"_polyVertices[i].x : %f, _polyVertices[i].y : %f", _polyVertices[i].x, _polyVertices[i].y); ccDrawLine(_polyVertices[i-1], _polyVertices[i]); } } Thanks

  Read the article

• Ray Intersecting Plane Formula in C++/DirectX

  - by user4585

  I'm developing a picking system that will use rays that intersect volumes and I'm having trouble with ray intersection versus a plane. I was able to figure out spheres fairly easily, but planes are giving me trouble. I've tried to understand various sources and get hung up on some of the variables used within their explanations. Here is a snippet of my code: bool Picking() { D3DXVECTOR3 vec; D3DXVECTOR3 vRayDir; D3DXVECTOR3 vRayOrig; D3DXVECTOR3 vROO, vROD; // vect ray obj orig, vec ray obj dir D3DXMATRIX m; D3DXMATRIX mInverse; D3DXMATRIX worldMat; // Obtain project matrix D3DXMATRIX pMatProj = CDirectXRenderer::GetInstance()->Director()->Proj(); // Obtain mouse position D3DXVECTOR3 pos = CGUIManager::GetInstance()->GUIObjectList.front().pos; // Get window width & height float w = CDirectXRenderer::GetInstance()->GetWidth(); float h = CDirectXRenderer::GetInstance()->GetHeight(); // Transform vector from screen to 3D space vec.x = (((2.0f * pos.x) / w) - 1.0f) / pMatProj._11; vec.y = -(((2.0f * pos.y) / h) - 1.0f) / pMatProj._22; vec.z = 1.0f; // Create a view inverse matrix D3DXMatrixInverse(&m, NULL, &CDirectXRenderer::GetInstance()->Director()->View()); // Determine our ray's direction vRayDir.x = vec.x * m._11 + vec.y * m._21 + vec.z * m._31; vRayDir.y = vec.x * m._12 + vec.y * m._22 + vec.z * m._32; vRayDir.z = vec.x * m._13 + vec.y * m._23 + vec.z * m._33; // Determine our ray's origin vRayOrig.x = m._41; vRayOrig.y = m._42; vRayOrig.z = m._43; D3DXMatrixIdentity(&worldMat); //worldMat = aliveActors[0]->GetTrans(); D3DXMatrixInverse(&mInverse, NULL, &worldMat); D3DXVec3TransformCoord(&vROO, &vRayOrig, &mInverse); D3DXVec3TransformNormal(&vROD, &vRayDir, &mInverse); D3DXVec3Normalize(&vROD, &vROD); When using this code I'm able to detect a ray intersection via a sphere, but I have questions when determining an intersection via a plane. First off should I be using my vRayOrig & vRayDir variables for the plane intersection tests or should I be using the new vectors that are created for use in object space? When looking at a site like this for example: http://www.tar.hu/gamealgorithms/ch22lev1sec2.html I'm curious as to what D is in the equation AX + BY + CZ + D = 0 and how does it factor in to determining a plane intersection? Any help will be appreciated, thanks.

  Read the article

• How can I achieve strong typing with a component messaging system?

  - by Vaughan Hilts

  I'm looking at implementing a messaging system in my entity component system. I've deduced that I can use an event / queue for passing messages, but right now, I just use a generic object and cast out the data I want. I also considered using a dictionary. I see a lot of information on this, but they all involve a lot of casting and guessing. Is there any way to do this elegantly and keep strong typing on my messages?

  Read the article

• What are cons of usage only non-member functions and POD?

  - by Miro

  I'm creating my own game engine. I've read these articles and this question about DOD and there was written to not use member functions and classes. I also heard some criticism to this idea. I can write it using member functions or non-member functions it would be similar. So what are benefits/cons of that approach or when project grows, does any of these approaches give clearer and better manageable code? With POD & non-member functions I don't have to make struct members public I can still use object id outside of engine like OpenGL does with all it's stuff, so It's not about encapsulation. POD - plain old data DOD - data oriented design

  Read the article

• How to add a sound that an enemy AI can hear?

  - by Chris

  Given: a 2D top down game Tiles are stored just in a 2D array Every tile has a property - dampen (so bricks might be -50db, air might be -1) From this I want to add it so a sound is generated at point x1, y1 and it "ripples out". The image below kind of outlines it better. Obviously the end goal is that the AI enemy can "hear" the sound - but if a wall is blocking it, the sound doesn't travel as far. Red is the wall, which has a dampen of 50db. I think in the 3rd game tick I am confusing my maths. What would be the best way of implementing this?

  Read the article

• Compressing 2D level data

  - by Lucius

  So, I'm developing a 2D, tile based game and a map maker thingy - all in Java. The problem is that recently I've been having some memory issues when about 4 maps are loaded. Each one of these maps are composed of 128x128 tiles and have 4 layers (for details and stuff). I already spent a good amount of time searching for solutions and the best thing I found was run-length enconding (RLE). It seems easy enough to use with static data, but is there a way to use it with data that is constantly changing, without a big drop in performance? In my maps, supposing I'm compressing the columns, I would have 128 rows, each with some amount of data (hopefully less than it would be without RLE). Whenever I change a tile, that whole row would have to be checked and I'm affraid that would slow down too much the production (and I'm in a somewhat tight schedule). Well, worst case scenario I work on each map individually, and save them using RLE, but it would be really nice if I could avoind that. EDIT: What I'm currently using to store the data for the tiles is a 2D array of HashMaps that use the layer as key and store the id of the tile in that position - like this: private HashMap< Integer, Integer [][]

  Read the article

• How does a collision engine work?

  - by JXPheonix

  Original question: Click me How exactly does a collision engine work? This is an extremely broad question. What code keeps things bouncing against each other, what code makes the player walk into a wall instead of walk through the wall? How does the code constantly refresh the players position and objects position to keep gravity and collision working as it should? If you don't know what a collision engine is, basically it's generally used in platform games to make the player acutally hit walls and the like. There's the 2D type and the 3D type, but they all accomplish the same thing: collision. So, what keeps a collision engine ticking?

  Read the article

• Optimal Compression for Speech

  - by ashes999

  I'm designing a game that depends heavily on audio; I will have some 300+ speech files (most of them just a word or two long). This can very quickly escalate the size of my final game. What's the optimal way to encode/compress speech files to keep the size minimal without getting audio artifacts? Please address both per-file compression/encoding, and also zipping/compressing the set of all speech files together in your answer. Because I'm not sure which (or combination of both) factors will give me the best results. Edit: I need this to run in Silverlight and Android, so I'm presumably stuck with only MP3 as my option (other than uncompressed wave files).

  Read the article

• Omni-directional light shadow mapping with cubemaps in WebGL

  - by Winged

  First of all I must say, that I have read a lot of posts describing an usage of cubemaps, but I'm still confused about how to use them. My goal is to achieve a simple omni-directional (point) light type shading in my WebGL application. I know that there is a lot more techniques (like using Two-Hemispheres or Camera Space Shadow Mapping) which are way more efficient, but for an educational purpose cubemaps are my primary goal. Till now, I have adapted a simple shadow mapping which works with spotlights (with one exception: I don't know how to cut off the glitchy part beyond the reach of a single shadow map texture): glitchy shadow mapping<<< So for now, this is how I understand the usage of cubemaps in shadow mapping: Setup a framebuffer (in case of cubemaps - 6 framebuffers; 6 instead of 1 because every usage of framebufferTexture2D slows down an execution which is nicely described here <<<) and a texture cubemap. Also in WebGL depth components are not well supported, so I need to render it to RGBA first. this.texture = gl.createTexture(); gl.bindTexture(gl.TEXTURE_CUBE_MAP, this.texture); gl.texParameteri(gl.TEXTURE_CUBE_MAP, gl.TEXTURE_MIN_FILTER, gl.LINEAR); gl.texParameteri(gl.TEXTURE_CUBE_MAP, gl.TEXTURE_MAG_FILTER, gl.LINEAR); for (var face = 0; face < 6; face++) gl.texImage2D(gl.TEXTURE_CUBE_MAP_POSITIVE_X + face, 0, gl.RGBA, this.size, this.size, 0, gl.RGBA, gl.UNSIGNED_BYTE, null); gl.bindTexture(gl.TEXTURE_CUBE_MAP, null); this.framebuffer = []; for (face = 0; face < 6; face++) { this.framebuffer[face] = gl.createFramebuffer(); gl.bindFramebuffer(gl.FRAMEBUFFER, this.framebuffer[face]); gl.framebufferTexture2D(gl.FRAMEBUFFER, gl.COLOR_ATTACHMENT0, gl.TEXTURE_CUBE_MAP_POSITIVE_X + face, this.texture, 0); gl.framebufferRenderbuffer(gl.FRAMEBUFFER, gl.DEPTH_ATTACHMENT, gl.RENDERBUFFER, this.depthbuffer); var e = gl.checkFramebufferStatus(gl.FRAMEBUFFER); // Check for errors if (e !== gl.FRAMEBUFFER_COMPLETE) throw "Cubemap framebuffer object is incomplete: " + e.toString(); } Setup the light and the camera (I'm not sure if should I store all of 6 view matrices and send them to shaders later, or is there a way to do it with just one view matrix). Render the scene 6 times from the light's position, each time in another direction (X, -X, Y, -Y, Z, -Z) for (var face = 0; face < 6; face++) { gl.bindFramebuffer(gl.FRAMEBUFFER, shadow.buffer.framebuffer[face]); gl.viewport(0, 0, shadow.buffer.size, shadow.buffer.size); gl.clear(gl.COLOR_BUFFER_BIT | gl.DEPTH_BUFFER_BIT); camera.lookAt( light.position.add( cubeMapDirections[face] ) ); scene.draw(shadow.program); } In a second pass, calculate the projection a a current vertex using light's projection and view matrix. Now I don't know If should I calculate 6 of them, because of 6 faces of a cubemap. ScaleMatrix pushes the projected vertex into the 0.0 - 1.0 region. vDepthPosition = ScaleMatrix * uPMatrixFromLight * uVMatrixFromLight * vWorldVertex; In a fragment shader calculate the distance between the current vertex and the light position and check if it's deeper then the depth information read from earlier rendered shadow map. I know how to do it with a 2D Texture, but I have no idea how should I use cubemap texture here. I have read that texture lookups into cubemaps are performed by a normal vector instead of a UV coordinate. What vector should I use? Just a normalized vector pointing to the current vertex? For now, my code for this part looks like this (not working yet): float shadow = 1.0; vec3 depth = vDepthPosition.xyz / vDepthPosition.w; depth.z = length(vWorldVertex.xyz - uLightPosition) * linearDepthConstant; float shadowDepth = unpack(textureCube(uDepthMapSampler, vWorldVertex.xyz)); if (depth.z > shadowDepth) shadow = 0.5; Could you give me some hints or examples (preferably in WebGL code) how I should build it?

  Read the article

• Detecting walls or floors in pygame

  - by Serial

  I am trying to make bullets bounce of walls, but I can't figure out how to correctly do the collision detection. What I am currently doing is iterating through all the solid blocks and if the bullet hits the bottom, top or sides, its vector is adjusted accordingly. However, sometimes when I shoot, the bullet doesn't bounce, I think it's when I shoot at a border between two blocks. Here is the update method for my Bullet class: def update(self, dt): if self.can_bounce: #if the bullet hasnt bounced find its vector using the mousclick pos and player pos speed = -10. range = 200 distance = [self.mouse_x - self.player[0], self.mouse_y - self.player[1]] norm = math.sqrt(distance[0] ** 2 + distance[1] ** 2) direction = [distance[0] / norm, distance[1 ] / norm] bullet_vector = [direction[0] * speed, direction[1] * speed] self.dx = bullet_vector[0] self.dy = bullet_vector[1] #check each block for collision for block in self.game.solid_blocks: last = self.rect.copy() if self.rect.colliderect(block): topcheck = self.rect.top < block.rect.bottom and self.rect.top > block.rect.top bottomcheck = self.rect.bottom > block.rect.top and self.rect.bottom < block.rect.bottom rightcheck = self.rect.right > block.rect.left and self.rect.right < block.rect.right leftcheck = self.rect.left < block.rect.right and self.rect.left > block.rect.left each test tests if it hit the top bottom left or right side of the block its colliding with if self.can_bounce: if topcheck: self.rect = last self.dy *= -1 self.can_bounce = False print "top" if bottomcheck: self.rect = last self.dy *= -1 #Bottom check self.can_bounce = False print "bottom" if rightcheck: self.rect = last self.dx *= -1 #right check self.can_bounce = False print "right" if leftcheck: self.rect = last self.dx *= -1 #left check self.can_bounce = False print "left" else: # if it has already bounced and colliding again kill it self.kill() for enemy in self.game.enemies_list: if self.rect.colliderect(enemy): self.kill() #update position self.rect.x -= self.dx self.rect.y -= self.dy This definitely isn't the best way to do it but I can't think of another way. If anyone has done this or can help that would be awesome!

  Read the article

• Directx and Open Libraries list? [closed]

  - by OVERTONE

  I've just been looking for comparissons between open and proprietary frameworks and libraries. More so just to get an idea of what exists than how they compare. For example: We have DirectX (graphics) and its open counterpart OpenGL DirectX (sound) and OpenAL But there are other DirectX libraries that I can't find open alternatives to such as DirectInput DXGI Direct2D DirectWrite Doe's anyone have any list's or Comparisons between Directx and their open counterparts?

  Read the article

• Making AI jump on a spot effectively

  - by Pasquale Sada

  How to calculate, in 3D environment, the closest point, from which an AI character can jump onto a platform? Setup I have an initial velocity V(Vx,Vy,VZ) and a spot where the character stands still at S(Sx,Sy,Sz). What I'm trying to achieve is a successful jump on a spot E(Ex,Ey,Ez) where you have clicked on(only lower or higher spot, because I've in place a simple steering behavior for even terrains). There are no obstacles around. I've implemented a formula that can make him jump in a precise way on a spot but you need to declare an angle: the problem arise when the selected spot is straight above your head. It' pretty lame that the char hang there and can reach a thing that is 1cm above is head. I'll share the code I'm using: Vector3 dir = target - transform.position; // get target direction float h = dir.y; // get height difference dir.y = 0; // retain only the horizontal direction float dist = dir.magnitude ; // get horizontal distance float a = angle * Mathf.Deg2Rad; // convert angle to radians dir.y = dist * Mathf.Tan(a); // set dir to the elevation angle dist += h / Mathf.Tan(a); // correct for small height differences // calculate the velocity magnitude float vel = Mathf.Sqrt(dist * Physics.gravity.magnitude / Mathf.Sin(2 *a)); return vel * dir.normalized; Ended up using the lowest angle (20 degree) and checking for collision on the trajectory. If found any increase the angle. Here some code (to improve the code maybe must stop the check at the highest point of the curve): Vector3 BallisticVel(Vector3 target, float angle) { Vector3 dir = target - transform.position; // get target direction float h = dir.y; // get height difference dir.y = 0; // retain only the horizontal direction float dist = dir.magnitude ; // get horizontal distance float a = angle * Mathf.Deg2Rad; // convert angle to radians dir.y = dist * Mathf.Tan(a); // set dir to the elevation angle dist += h / Mathf.Tan(a); // correct for small height differences // calculate the velocity magnitude float vel = Mathf.Sqrt(dist * Physics.gravity.magnitude / Mathf.Sin(2 * a)); return vel * dir.normalized; } Vector3 TrajectoryPoint(Vector3 startingPosition, Vector3 startingVelocity, float n ) { float t = 1/60 ; // seconds per time step Vector3 stepVelocity = t * startingVelocity; // m/s Vector3 stepGravity = t * t * Physics.gravity; // m/s/s return startingPosition + n * stepVelocity + 0.5f * (n*n+n) * stepGravity; } bool CheckTrajectory(Vector3 startingPosition,Vector3 target, float angle_jump) { Debug.Log("checking"); if(angle_jump < 80f) { Debug.Log("if"); Vector3 startingVelocity = BallisticVel(target, angle_jump); for (int i = 0; i < 180; i++) { //Debug.Log(i); Vector3 trajectoryPosition = TrajectoryPoint( startingPosition, startingVelocity, i ); if(Physics.Raycast(trajectoryPosition,Vector3.forward,safeDistance)) { angle_jump += 10; break; // restart loop with the new angle } else continue; } return true; JumpVelocity = BallisticVel(target, angle_jump); } return false; }

  Read the article

• using heightmap to simulate 3d in an isometric 2d game

  - by VaTTeRGeR

  I saw a video of an 2.5d engine that used heightmaps to do zbuffering. Is this hard to do? I have more or less no idea of Opengl(lwjgl) and that stuff. I could imagine, that you compare each pixel and its depthmap to the depthmap of the already drawn background to determine if it gets drawn or not. Are there any tutorials on how to do this, is this a common problem? It would already be awesome if somebody knows the names of the Opengl commands so that i can go through some general tutorials on that. greets! Great 2.5d engine with the needed effect, pls go to the last 30 seconds Edit, just realised, that my question wasn't quite clear expressed: How can i tell Opengl to compare the existing depthbuffer with an grayscale texure, to determine if a pixel should get drawn or not?

  Read the article

< Previous Page | 520 521 522 523 524 525 526 527 528 529 530 531  | Next Page >