Search Results

Search found 14745 results on 590 pages for 'setting'.

Page 527/590 | < Previous Page | 523 524 525 526 527 528 529 530 531 532 533 534  | Next Page >

• Issues getting a Cisco WLC 5508 to find AIR-LAP1142N

  - by user95917

  hoping someone can help me with a problem here. I'm attempting to setup a test (loan from Cisco) wireless network. Here's what i've got/done: 5508 Controller - Service Port IP set to 10.74.5.2 /24. Management IP set to 10.74.6.2 /24 with a default gateway of 10.74.6.1. Virtual IP set to 1.1.1.1. Copper SFP in slot 7, CAT5 (known good) going from there to port 1/0/47 on the switch. Green lights on both ends. 2960-S Switch - Vlan1 - 10.74.6.1 /24. dhcp pool 10.74.6.0 /24, default router 10.74.6.1. excluded-address 10.74.6.1, 10.74.6.2. 1/0/4 on the switch is set to switchport mode access and no shut. 1/0/47 on the switch is setup to switchport mode trunk and no shut. 1/0/4 has a CAT5 (known good) cable going from there to the AP. When I do a sh cdp nei from the switch, i can see the AP and Controller listed. When i configure my PC's nic to 10.74.5.5, and plug a cable from my nic to the SP port on the controller i can get on the device via the gui. In there, the only errors/info that show up in the trap are: Link Up: Slot: 0 Port: 7 Controller time base status - Controller is out of sync with the central timebase. I've manually set the time but apparently that's not quite the problem (or at least not the entire problem). When i plug the AP in, i see on the switch console that it grants it power, it sees it connect...but the controller won't see it for some reason. From what i've read you shouldn't have to do anything to the AP as it's managed by the controller...but i'm not sure what setting I'm missing for it to work. The AP light on top is continually cycling green, red, yellow. When I first start it up, it blinks green for 20 or so seconds, then goes to solid green for another 20 seconds or so, then flashes blue, green, red for awhile...but always ends up goinn back to the standard, green, red, yellow. Does anyone see any obvious issues with my setup or have any suggestions as to why i might be having a problem? Thanks for your help!

  Read the article

• How to add an iptables rule with source IP address

  - by ???

  I have a bash script that starts with this: if [[ $EUID -ne 0 ]]; then echo "Permission denied (are you root?)." exit 1 elif [ $# -ne 1 ] then echo "Usage: install-nfs-server <client network/CIDR>" echo "$ bash install-nfs-server 192.168.1.1/24" exit 2 fi; I then try to add the iptables rules for NFS as follows: iptables -A INPUT -i eth0 -p tcp -s $1 --dport 111 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 111 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p udp -s $1 --dport 111 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 111 -m state --state ESTABLISHED -j ACCEPT service iptables save service iptables restart I get the error: Try iptables -h' or 'iptables --help' for more information. Bad argument111' Try iptables -h' or 'iptables --help' for more information. Bad argument111' Saving firewall rules to /etc/sysconfig/iptables: ^[[60G[^[[0;32m OK ^[[0;39m]^M Flushing firewall rules: ^[[60G[^[[0;32m OK ^[[0;39m]^M Setting chains to policy ACCEPT: filter ^[[60G[^[[0;32m OK ^[[0;39m]^M Unloading iptables modules: ^[[60G[^[[0;32m OK ^[[0;39m]^M Applying iptables firewall rules: ^[[60G[^[[0;32m OK ^[[0;39m]^M Loading additional iptables modules: ip_conntrack_netbios_ns ^[[60G[^[[0;32m OK ^[[0;39m]^M When I open /etc/sysconfig/iptables these are the rules: # Generated by iptables-save v1.3.5 on Mon Mar 26 08:00:42 2012 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [466:54208] :RH-Firewall-1-INPUT - [0:0] -A INPUT -j RH-Firewall-1-INPUT -A FORWARD -j RH-Firewall-1-INPUT -A OUTPUT -o eth0 -p tcp -m tcp --sport 111 -m state --state ESTABLISHED -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --sport 111 -m state --state ESTABLISHED -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 111 -m state --state ESTABLISHED -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --sport 111 -m state --state ESTABLISHED -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m state --state NEW -m udp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -i lo -j ACCEPT -A RH-Firewall-1-INPUT -p icmp -m icmp --icmp-type any -j ACCEPT -A RH-Firewall-1-INPUT -p esp -j ACCEPT -A RH-Firewall-1-INPUT -p ah -j ACCEPT -A RH-Firewall-1-INPUT -d 224.0.0.251 -p udp -m udp --dport 5353 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited COMMIT # Completed on Mon Mar 26 08:00:42 2012 ~ "/etc/sysconfig/iptables" 32L, 1872C I've also tried: iptables -I RH-Firewall-1-INPUT 1 -m state --state NEW -m tcp -p tcp --source $1 --dport 111 -j ACCEPT iptables -I RH-Firewall-1-INPUT 2 -m udp -p udp --source $1 --dport 111 -j ACCEPT

  Read the article

• Windows 7 remains powered on when restarting

  - by BombDefused

  I'm running windows 7 x64 on an MSI P67A-GD53 motherboard, in an Antec P280 Super Midi Towercase with a Corsair 650w PSU. I've just installed a second instance of windows 7 x64 on a separate disk (this is to keep my games separate from my work OS). The problem is that it appears now that I cannot restart from either instance of Windows 7. The shut down command, and sleep commands work as expected. When I try to restart, the shutdown happens but the system never reboots. Everything remains powered on, until I hold down the power button to force the power off. Ithink (but am not 100% sure) this has only started since I installed the second OS, and am assuming this has something to do with the motherboard needing to know which OS to run up again? Some other forums I've read suggest that the PSU has a major role in restart and could be at fault. Changing the boot order of the disks in the BIOS does not change anything. Any suggestions greatfully recieved! Update: I now have a reproduceable issue: I think the secondary OS install may have been a red herring. It was when windows tried to reboot during the install that I noticed the issue. After playing around with installing drivers, and rebooting many many times, I have found that it is the OC genie setting on the MSI motherboard that seems to trigger the problem. This makes sense as I only started using the OC genie feature a couple of weeks ago, and probably hadn't used restart in that time. However... simply turning off OC genie does not make the issue go away. I have to turn off OC genie, shutdown, start enter bios, go to the "Save and Exit" menu "Restore Defaults" yes to "Load optimized defaults", which will reset to clear the problem. Now when the PC boots into windows, I can restart as normal (and from the OS on either HDD). I only know how to control the issue, and don't still know the root cause. I'd like to be able to use the OC genie function if anyone can suggest a why I'm seeing this problem. Could it be that I'm drawing too much power when using OC feature?

  Read the article

• How to configure nginx so it works with Express?

  - by Michal Stefanow

  I'm trying to configure nginx so it proxy_pass requests to my node apps. Question on StackOverflow got many upvotes: http://stackoverflow.com/questions/5009324/node-js-nginx-and-now and I'm using config from there. (but since question is about server configuration it is supposed to be on ServerFault) Here is the nginx configuration: server { listen 80; listen [::]:80; root /var/www/services.stefanow.net/public_html; index index.html index.htm; server_name services.stefanow.net; location / { try_files $uri $uri/ =404; } location /test-express { proxy_pass http://127.0.0.1:3002; } location /test-http { proxy_pass http://127.0.0.1:3003; } } Using plain node: var http = require('http'); http.createServer(function (req, res) { res.writeHead(200, {'Content-Type': 'text/plain'}); res.end('Hello World\n'); }).listen(3003, '127.0.0.1'); console.log('Server running at http://127.0.0.1:3003/'); It works! Check: http://services.stefanow.net/test-http Using express: var express = require('express'); var app = express(); // app.get('/', function(req, res) { res.redirect('/index.html'); }); app.get('/index.html', function(req, res) { res.send("blah blah index.html"); }); app.listen(3002, "127.0.0.1"); console.log('Server running at http://127.0.0.1:3002/'); It doesn't work :( See: http://services.stefanow.net/test-express I know that something is going on. a) test-express is NOT running b) text-express is running (and I can confirm it is running via command line while ssh on the server) root@stefanow:~# service nginx restart * Restarting nginx nginx [ OK ] root@stefanow:~# curl localhost:3002 Moved Temporarily. Redirecting to /index.html root@stefanow:~# curl localhost:3002/index.html blah blah index.html I tried setting headers as described here: http://www.nginxtips.com/how-to-setup-nginx-as-proxy-for-nodejs/ (still doesn't work) proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-NginX-Proxy true; I also tried replacing '127.0.0.1' with 'localhost' and vice versa Please advise. I'm pretty sure I miss some obvious detail and I would like to learn more. Thank you.

  Read the article

• Intermittent internet access on a flat network - Router is connected

  - by Naveed

  I’m looking for some help with network settings. I’ve just started a new job (non-IT!) and we have problems with our office network. I’m the most IT literate in the organisation (15 permanent employees) and so have been dealing with IT issues. Our main bit of software is web-based so we need constant web access but it sometimes goes down for between 20 minutes and 3 hours despite everything seemingly working fine. It’s a flat network with wireless APs, BT Business Broadband 8Mbit connection and that’s about it. We have no servers and no standard settings and staff are encouraged to bring in their own laptops and connect! The network basically exists to provide internet access and that’s it. We also have students accessing the wireless (and I know there’s a whole list of access and content issues etc but right now we just need internet access stabilised). This is what we have: Building 1 Cisco SLM-224P 24-port PoE 10/100 switch with 2 gigabit ports 3 x ZyXEL NWA-3160 wireless APs Samsung OfficeServ 7100 phone server which borrows the building’s wiring Building 2 Netgear GS605-UK 5-port 10/100/1000 switch 1 x ZyXEL NWA-3160 wireless AP 1 x BT Business Hub – 2wire BT2700hgv – is the DHCP server We have 2 link cables between the buildings. One connects the two switches on a gigabit port. The second (oddly) connects the switch in building 2 to the OfficeServ server in building 1. When the internet goes down I can still access the router through a wireless connection. I can also ping websites and get a response. Firefox just says “Cannot connect” etc. The system then heals itself when it feels like it. (Sorry if this is asking too much but) These are my immediate questions… Why would browser-based internet go down? I don’t know enough about protocols etc but I can try to standardise settings. The WAPs have a DNS server setting and I don’t know whether it should be “None” or “From DHCP”. What should be the DHCP server? The router or the Cisco switch? Or something else?! Would there be any problem in connecting the second link from switch to switch? Is that good practice? Is it worth swapping the Netgear GS605 with either a Cisco SG200-08 or Netgear GS108T-200? Is it worth upgrading the router to, for instance, a Cisco RV042G Dual Gigabit router which would also act as a switch? Or is it better to have a separate router and switch in Building 2?

  Read the article

• Profiles and using the local profile for a domain user

  - by Harry

  I’m having some trouble with profiles and would like to reach out for some help. I’ve tried to do some research to help myself along, but I’m not making much progress on my own. I’ve pretty much taken over the sys admin duties for my small lab, I don’t have much experience to justify it besides I’m the only with the time and dedication to go at it (The environment was in a state of disrepair). My network and domain I look over are extremely small by most standards, about 10 users at a time. They are pretty intensive activity on the network, and we do work with fairly large files. None of the network is online, which is nice at the moment because it allows me not to have another headache. On to my profile problem, I have set up roaming profiles for the users in the network. Now after a little research, I think I will be switching this to a hybrid of folder redirection and roaming profiles as this seems to best practice. I also don’t want the users having to wait for a long time if they have a bloated profile. Now I’ve finally got a build working using MDT. We have Mac Pros, and it wasn’t fun getting everything to play nice. The way I did this was by setting up a reference computer and installing all the software and tools that each user would need and editing the settings preferences to how we would need them. I think used MDT to do a sys prep and capture to create the image of my reference computer. Using the reference image I can push out my images to the rest of the desktops in my environment. The issue I’m having is when we join the computer to domain. The user can login and operate fine on the computer, but I’d like a more. When the user is logged on with their domain user name they lose a lot of the icons I had on my reference image, as well as the desktop background and some other miscellaneous settings. I would love to have the user log on using their domain user name and see the icons and desktop environment as I had it setup on the reference computer. I’m not sure if it is possible, or something simple that I’m missing, but any help would be greatly appreciated!

  Read the article

• Splitting an internet connection between multiple separate subnetworks

  - by pythonian4000

  Problem I have an internet connection that I want to split between four separate networks. My requirements are: I need to be able to monitor the amount of bandwidth and data being used by each network, and notify or control as necessary. The four networks should only be able to connect to the internet, not each other. My parents need to be able to operate it, so it needs a simple, preferably Windows-based GUI. Progress so far Server I have a mini-ITX server with six Gigabit ethernet ports - one for the ethernet internet connection, one for each of the four networks, and one for remote access to the server for administration. Bandwidth control I spent a long time researching solutions here. The majority of the control systems/software I found could control bandwidth usage via QOS, but could not monitor or control the amount of data being used. Eventually I found the SoftPerfect Bandwidth Manager, which has everything I need in terms of monitoring and control - per-interface quota management, usage statistics, a web interface for checking usage, and email notifications when quotas are exceeded. It is also Windows-based and has a simple GUI. Internet sharing This is where I am having issues. I am currently using Windows XP Pro SP2 for the server (yes, I know this is far from ideal, but it's the only spare Windows OS I currently have). I can't use the built-in Internet Connection Sharing for several reasons: The upstream internet router has an IP of 192.168.0.1 which ICS clashes with, and I cannot change the router settings. ICS can only share an internet connection with a single interface, but I have four. I have tried bridging the four network cards, but then the Bandwidth Manager cannot see the four individual interfaces - it only sees the bridge. I have tried setting up Dual DHCP DNS server (and am having issues getting DHCP offers to be received by clients), but that would still require gateway software of some sort, which I have been unable to find. My current attempt is to use OpenVPN, with a server for the internet NIC and a separate client for each of the four networks. My thought is that I could bridge the OpenVPN TAP devices to each NIC, meaning that the Bandwidth Manager would control traffic from the bridge instead of the interface. I have not made much progress here though - I've never used OpenVPN before. Questions Is there a Windows software package that does everything I need? (Unlikely, I know) Is there a Windows software package that will share internet between multiple NICs without bridging? Are either of my about attempts feasible? Would it help to have a newer/server version of Windows? Is there a non-Windows alternative that is easy to use?

  Read the article

• Archlinux/atheros WLAN configuration troubles

  - by GrinReaper

  I'm trying to config archlinux to use my wireless network adapter. It's quite troublesome. From what I've gathered, it's an atheros network adapter, using the ath5k driver/module... I can't get it to work; any ideas? Here's some of the output from my tinkering: # lspci | grep -i net 00:0a.0 Ethernet controller: nVidia corporation MCP67 Ethernet (reva2) 03:00.0 Ethernet controller: atheros communications inc. AR5001 Wireless Network Adapter (rev01) # lsusb ... Bus 004 Device 003: ID 03f0:17d Hewlett Packard Wireless (Bluetooth + WLAN Interface [Integrated Module] # ping -c 3 www.google.com ping: unknown host www.google.com #ping -c 3 8.8.8.8 ping: network is unreachable # lspci -v 03:00.0 Ethernet controller: atheros communications inc. AR5001 Wireless Network Adapter (rev01) ... Kernel driver in use: ath5k Kernel modules: ath5k # dmesg |grep ath5k registered as phy0 registered led device ath5k: atheros chip found PCI INT A disabled registered led device registered as phy1 # ip addr | sed '/^[0-9]/!d;s/: <.*$//' 1: lo 2: eth1 3: eth0 # ip link set <interface> up/down RNETLINK answers: Operation not possible due to RF-kill Also, is there a way to dump text from command-line to a text file so i can just copy pasta? Sorry, first time using a linux distro... EDIT: So I just tried this: I actually just did this twice. (I can't tell which setting is on/off for my wireless adapter. The lights are blue all the time now.) #rfkill list 0: hp-wifi: wireless lan softblocked: no hardblocked :yes 1: hp-bluetooth: bluetooth softblocked: no hardblocked :yes 3: phy1: wireless lan softblocked: no hardblocked :yes #rfkill list 0: hp-wifi: wireless lan softblocked: no hardblocked :no 1: hp-bluetooth: bluetooth softblocked: no hardblocked no 3: phy1: wireless lan softblocked: no hardblocked :yes 7: hci0: bluetooh 0: hp-wifi: wireless lan softblocked: no hardblocked :no I've dug around some other articles and it seems like ath5k is supposed to be preferable to madwifi, so should i be using madwifi? I'm 99% sure I disabled the hardblock (by turning it ON) but, as shown above, phy1 wireless lan is STILL hardblocked. What gives? Maybe I've made some more fundamental error in a basic config file? EDIT: I've fixed the hardblock. I've tried pinging www.google.com, but to no avail. I get: ping: unknown host www.google.com In the arch wiki: Edit /etc/hosts and add the same HOSTNAME you entered in /etc/rc.conf: 127.0.0.1 archlinux.domain.org localhost.localdomain localhost archlinux To my understanding, hostname is just a user-specified and based on preference(?) My /etc/rc.conf: HOSTNAME="gestalt" My /etc/hosts: 127.0.0.1 localhost.localdomain localhost gestalt but should it be the following? 120.0.0.1 localhost.domain.org localhost.localdomain localhost gestalt

  Read the article

• .htaccess working on remote server but does not work on localhost. Getting 404 errors on localhost

  - by Afsheen Khosravian

  MY PROBLEM: When I visit localhost the site does not work. It shows some text from the site but it seems the server can not locate any other files. Here is a snippet of the errors from firebug: "NetworkError: 404 Not Found - localhost/css/popup.css" "NetworkError: 404 Not Found - localhost/css/style.css" "NetworkError: 404 Not Found - localhost/css/player.css" "NetworkError: 404 Not Found - localhost/css/ui-lightness/jquery-ui-1.8.11.custom.css" "NetworkError: 404 Not Found - localhost/js/jquery.js" It seems my server is looking for the files in the wrong places. For example, localhost/css/popup.css is actually located at localhost/app/webroot/css/popup.css. I have my site setup on a remote server with the same exact configurations and it works perfectly fine. I am just having this issue trying to run the site on my laptop at localhost. I edited my VirtualHosts file DocumentRoot and to /home/user/public_html/site.com/public/app/webroot/ and this reduces some errors but I feel that this is wrong and sort of hacking it since I didn't use these setting on my production server which works. The last note I want to make is that the website uses dynamic URLs. I dont know if that has anything to do with it. For example, on the production server the URLS are: site.com/#hello/12321. HERES WHAT I AM WORKING WITH: I have a LAMP server setup on my laptop which runs on Ubuntu 11.10. I have enabled mod_rewrite: sudo a2enmod rewrite Then I edited my Virtual Hosts file: <VirtualHost *:80> ServerName localhost DirectoryIndex index.php DocumentRoot /home/user/public_html/site.com/public <Directory /home/user/public_html/site.com/public/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> </VirtualHost> Then I restarted apache. My website is using cakePHP. This is the directory structure of the website: "/home/user/public_html/site.com/public" contains: index.php app cake plugins vendors These are my .htaccess files: /home/user/public_html/site.com/public/app/.htaccess: <IfModule mod_rewrite.c> RewriteEngine on RewriteRule ^$ webroot/ [L] RewriteRule (.*) webroot/$1 [L] </IfModule> /home/user/public_html/site.com/public/app/webroot/.htaccess: <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ index.php?url=$1 [QSA,L] </IfModule>

  Read the article

• What "pieces" are needed in order to set up a cluster of physical servers?

  - by Chris Dutrow

  Background: Currently, we use Rackspace cloud servers. We have no intention to stop using them, but would like to look into setting up a cluster of physical servers (probably desktop computers in the $400 range with 8gb memory each) to offset some of our load and work as a secondary, more powerful, less reliable system. To put things in perspective, we can buy comparable desktop computers for the same price as we pay in one month to rent them on Rackspace Cloud. I understand that this is generally a dumb idea. However, in this particular instance, the server cluster is needed for its computation power. It is not mission-critical, it does not host a consumer-facing website, and if it goes down for a day or two, its not really a problem. Currently, we have access to business class verizon fios. If I understand correctly, we can get at least 25 dedicated IP addresses with this service, this should be enough. Requirements: Each server runs Linux Centos 6.3 Some of the servers run Python and execute processes from a task queue (Redis or RabbitMQ) Some of the servers are capable of serving static files and Python driven REST APIs Some of the servers host a Cassandra database cluster One or more of the servers are a Redis database servers One or more of the servers are PostgreSQL servers Questions: What kind of router or switch is needed? We would like the computers to be able to communicate effectively with each other via internal IP addresses. This is especially important for communicating with servers hosting Redis that need to be able to respond to requests very quickly. Are there special switches or routers that need to be used to connect the servers together? Are Desktop computers ok for this? We have found that we are mostly RAM-bottle necked, I understand that some servers have highly superior CPUs, but I'm not sure we need CPU power as much as we need RAM, which is cheap in Desktop computers. Will we have problems with the WIFI cards in the desktops or any other unexpected hardware limitation? What tools should be used to "image" the servers. For example, when we get an installation right for a Redis server or Cassandra node, are there tools that come with Linux Centos 6.3 to image the server to a USB drive or something like that? Or do we need to use some other software for this? What other things are we missing that we should be concerned about? Thanks so much!

  Read the article

• Autoloading Development or Production configs (best practices)

  - by Xeoncross

  When programming sites you usually have one set of config files for the development environment and another set for the production server (or one file with both settings). I am assuming all projects should be handled by version control like git or svn. Manual file transfers (like FTP) is wrong on so many levels. How you enable/disable the correct settings (so that your system knows which ones to use) is a problem for me. Each system I work on just kind of jimmy-rigs a solution. Below are the 3 methods I know of and I am hoping that someone can submit a more elegant solutions. 1) File Based The system loads a folder structure based on the URL requested. /site.com /site.fakeTLD /lib index.php For example, if the url is http://site.com then the system loads the production config files located in the site.com folder. However, if I'm working on the site locally I visit http://site.fakeTLD to work on the local copy of the site. To setup this I edit my hosts file and add site.fakeTLD to point to my own computer (127.0.0.1/localhost) and then create a vhost in apache. So now I can work on the codebase locally and then push to the server without any trouble. The problem is that this is susceptible to a "host" injection attack. So someone loading site.com could set the host to site.fakeTLD and then the system would load my development config files instead of production. 2) Config Based The config files contain on section for development - and one for production. The problem is that each time you go to push your changes to the repo you have to edit the file to specify which set of config options should be used. $use = 'production'; //'development'; This leaves the repo open to human error should one of the developers forget to enable the right setting. 3) File System Check Based All the development machines have an extra empty file called "development.txt" or something. Each time the system loads it checks for this file - if found then it knows it is in development mode - if missing then it knows it is in production mode. Since the file is NEVER ADDED to the repo then it will never be pushed (and checked out) on the production machine. However, this just doesn't feel right and causes a slight slow down since all filesystem checks are slow.

  Read the article

• Using OpenVPN, yet netflix.com blocks access

  - by user837848

  I have set up an OpenVPN server on a VPS in the USA and configured it to route all clients traffic through it. Everything seems to work fine regarding the VPN connection in gerneral. All ip lookup sites show me the us server's ip address and even hulu.com works(it won't work if you are not in the usa). But for some reason netflix.com says "Sorry, Netflix is not available in your country yet.". So I thought that netflix probably uses some more sophisticated ways to determine your location beyond just your ip address. But I could not find a way to get it to work until I dropped the idea of using a VPN and instead connected to the server via a simple socks tunnel with ssh by running: ssh -D 9999 user@serverip All I had to do was changing the key network.proxy.socks_remote_dns in Firefox from false to true to prevent DNS leaks and setting up the socks proxy. Then I could finally watch netflix.com. As a result I concluded that there is nothing in the browser(or something like system timezone) that tells netflix the location, so it has to have something to do with the OpenVPN config. After that I used tcpdump to log all the traffic on the server's network interface venet0 (OpenVZ VPS), visited netflix.com on the client while first connected to the VPN and then connected via socks tunnel and afterwards compared both outputs. The only thing that caught my eye was that while using the socks tunnel the server mainly used ipv6 to connect to netflix whereas it only used ipv4 when the client was connected to the OpenVPN server. But I don't get how that could make such a difference. So what am I missing? Is there a way to configure OpenVPN to also use ipv6 to connect to a website although there is only an ipv4 connection between the VPS and the client? Here is the server.conf of the OpenVPN server (OpenVZ VPS) local serverip port 443 proto tcp dev tun ca ./easy-rsa2/keys/ca.crt cert ./easy-rsa2/keys/vps1.crt key ./easy-rsa2/keys/vps1.key # This file should be kept secret dh ./easy-rsa2/keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" client-to-client keepalive 10 120 tls-auth ta.key 0 # This file is secret cipher AES-256-CBC comp-lzo max-clients 4 user nobody group nogroup persist-key persist-tun status openvpn-status.log log-append openvpn.log verb 3 iptables forwarding iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o venet0 -j SNAT --to-source serverip (enabled ipv4 forwarding) I have tried everything always on a Win7 and a Debian client with only ipv4 connections and always made sure that they use the correct DNS server (tested with ipleak.net and tcpdump / wireshark). client.conf: client dev tun proto tcp remote serverip 443 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server tls-auth ta.key 1 cipher AES-256-CBC comb-lzo verb 3

  Read the article

• Ubuntu 10.04 LTS - Dual monitor works only sometimes (ATI multi-desktop)

  - by Beres Botond

  I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW). I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine. But since a while it doesn't work properly anymore: At home it still works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. With the home monitor I can see the whole bootup process on both monitors (laptop + LCD) and it always just works fine. With the work monitor on the external LCD monitor I just see "No video input" until I get to the login screen, then it shows up there as well. But after login it will either: Flicker a few times, but then work OK. Or (more often) Flicker once and then go back to "No video input" again. I usually end up rebooting a few times until it works. Does anyone have any idea for fixing it? This is my xorg.conf currently: Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[6]-0" 0 0 Screen "amdcccle-Screen[6]-1" 1280 0 EndSection Section "Files" EndSection Section "Module" Load "glx" EndSection Section "ServerFlags" Option "Xinerama" "off" EndSection Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1440x900" EndSection Section "Device" Identifier "Default Device" Driver "fglrx" EndSection Section "Device" Identifier "amdcccle-Device[6]-0" Driver "fglrx" Option "Monitor-LVDS" "0-LVDS" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "amdcccle-Device[6]-1" Driver "fglrx" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:6:0:0" Screen 1 EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[6]-0" Device "amdcccle-Device[6]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[6]-1" Device "amdcccle-Device[6]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Can't upgrade my Ubuntu server, it gets stuck on openjdk-6-jre-headless

  - by Jean-Nicolas Boulay Desjardins

  I am using Ubuntu Server. When I do: apt-get upgrade it gets stuck on: Setting up openjdk-6-jre-headless (6b20-1.9.7-0ubuntu1) ... Why? And what can I do to stop it? I tried removing it with apt-get... I get this error: E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. So then I tried this: dpkg --purge openjdk-6-jre-headless I got this: dpkg: dependency problems prevent removal of openjdk-6-jre-headless: openjdk-6-jre-lib depends on openjdk-6-jre-headless (>= 6b17). ca-certificates-java depends on openjdk-6-jre-headless (>= 6b16-1.6.1-2) | java6-runtime-headless; however: Package openjdk-6-jre-headless is to be removed. Package java6-runtime-headless is not installed. Package openjdk-6-jre-headless which provides java6-runtime-headless is to be removed. ca-certificates-java depends on openjdk-6-jre-headless (>= 6b16-1.6.1-2) | java6-runtime-headless; however: Package openjdk-6-jre-headless is to be removed. Package java6-runtime-headless is not installed. Package openjdk-6-jre-headless which provides java6-runtime-headless is to be removed. dpkg: error processing openjdk-6-jre-headless (--purge): dependency problems - not removing Errors were encountered while processing: openjdk-6-jre-headless The thing is I think my DB is using it... Not sure... I am using Cassandra with Thrift... Yes, it's getting a bit more complex... # dpkg --configure -a I get: dpkg: dependency problems prevent configuration of openjdk-6-jre: openjdk-6-jre depends on openjdk-6-jre-headless (>= 6b20-1.9.7-0ubuntu1); however: Package openjdk-6-jre-headless is not configured yet. dpkg: error processing openjdk-6-jre (--configure): dependency problems - leaving unconfigured Processing triggers for libc-bin ... ldconfig deferred processing now taking place dpkg: dependency problems prevent configuration of libaccess-bridge-java: libaccess-bridge-java depends on default-jre | openjdk-6-jre | sun-java6-jre; however: Package default-jre is not installed. Package openjdk-6-jre is not configured yet. Package sun-java6-jre is not installed. dpkg: error processing libaccess-bridge-java (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of icedtea-6-jre-cacao: icedtea-6-jre-cacao depends on openjdk-6-jre-headless (= 6b20-1.9.7-0ubuntu1); however: Package openjdk-6-jre-headless is not configured yet. dpkg: error processing icedtea-6-jre-cacao (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libaccess-bridge-java-jni: libaccess-bridge-java-jni depends on libaccess-bridge-java (>= 1.26.2-5); however: Package libaccess-bridge-java is not configured yet. dpkg: error processing libaccess-bridge-java-jni (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: openjdk-6-jre libaccess-bridge-java icedtea-6-jre-cacao libaccess-bridge-java-jni Thanks again for any help.

  Read the article

• Why do I have multiple drives in my backup system image?

  - by bebop

  I have a drive which has 2 partitions. One is where the OS is installed, the other is a data (but not libraries) drive. When I try and create a backup using the built in tool, it wants to include both partitions in the system image. Why does it do this? If I move the os to a separate drive will I be able to back up just this data? Edit: To be more clear. I have 4 disks in the machine. 1 disc has 2 partitions. These are c: and e:, the other disks are d: f: and h:. The OS is installed on c: and libraries are stored on h:. The libraries are already backed up using crashplan, but I want to create a system image so I can easily restore the machine, if it either dies or if I get a SSD drive. When I choose backup (either through the wizard or if I open it through control panel) and check (or click) create a system image it automatically adds both c: and e: to the list of drives that will be backed up, and I cannot change this, the checkboxes to unselect are greyed out. I would like to know why it automatically adds e: to the list (but not h:, where the libraries are) and if I can change some setting so whatever files it has on e: that it thinks need to be backed up as part of the system image are moved to c:. How can I determine what they are? Is it because c: and e: are partitions of the same disk? If I move c: tro a different disk will that mean I only have to back up c:? Thanks Edit 2: I have viewed all files including hidden and system ones on both drives and it seems that I have a suspicous hidden e:\boot\ folder. I think that I might have installed the OS as a VHD at first then installed a seperate version straight on the disk, having dual boot for a while, then used EasyBCD to remove the VHD boot and file. Might this be what is causing my issue? How might I go about removing this? is it safe to just delete the boot folder?

  Read the article

• Accessing guests on virtual network when connected to host via PPTP

  - by Viktor Elofsson

  I'm setting up a development machine which runs Ubuntu 12.04 and KVM for virtualization. I have a guest running Ubuntu 12.04 which can be accessed from the host via its IP address which is assigned by libvirt. The guest can also access the internet, no problem there. However, now I want to setup PPTP so I can connect to the host (from my workstation running Windows 7) and directly access guests without relying on SSH port forwarding. I can connect from my W7-machine to the host (PPTP), but I cannot access any virtual machines (which are accessable from the host directly). Relevant configuration files cat /etc/network/interfaces auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address x.x.x.x broadcast x.x.x.x netmask x.x.x.x gateway x.x.x.x # default route to access subnet up route add -net x.x.x.x netmask x.x.x.x gw x.x.x.x eth0 virsh net-edit default <network> <name>default</name> <uuid>xxxxxxxx-72ce-3c20-af0f-d3a010f1bef0</uuid> <forward mode='nat'/> <bridge name='virbr0' stp='on' delay='0' /> <mac address='52:54:00:xx:xx:xx'/> <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.122.2' end='192.168.122.254' /> <host mac='52:54:00:yy:yy:yy' name='web1' ip='192.168.122.11' /> </dhcp> </ip> </network> cat /etc/pptpd.conf (commented lines removed) # TAG: option # Specifies the location of the PPP options file. # By default PPP looks in '/etc/ppp/options' # option /etc/ppp/pptpd-options # TAG: logwtmp # Use wtmp(5) to record client connections and disconnections. # logwtmp #(Recommended) localip 192.168.122.1 remoteip 192.168.122.234-238,192.168.122.245 cat /etc/ppp/chap-secrets* # Secrets for authentication using CHAP # client server secret IP addresses xxxxx * yyyyyyyyyy 192.168.122.100 I get the correct IP address when connecting my W7-machine, but when I try to ping the virtual machine at 192.168.122.11 I get Reply from 192.168.122.1: Destination port unreachable. It's probably something trivial I'm missing but I can't for the life of me figure out what it is. So I'm turning to you, serverfault.

  Read the article

• mysql: job failded to start. mysqld.sock is missing

  - by Freefri

  How can I fix this and start mysql-server? After /etc/init.d/mysql start or service mysql start I get the message start: "Job failed to start" And after # mysqld I get this: mysqld 121123 11:33:33 [ERROR] Can't find messagefile '/usr/share/mysql/errmsg.sys' 121123 11:33:33 [Note] Plugin 'FEDERATED' is disabled. mysqld: Unknown error 1146 121123 11:33:33 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 121123 11:33:33 InnoDB: The InnoDB memory heap is disabled 121123 11:33:33 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121123 11:33:33 InnoDB: Compressed tables use zlib 1.2.3.4 121123 11:33:33 InnoDB: Initializing buffer pool, size = 128.0M 121123 11:33:33 InnoDB: Completed initialization of buffer pool 121123 11:33:33 InnoDB: highest supported file format is Barracuda. 121123 11:33:33 InnoDB: Waiting for the background threads to start 121123 11:33:34 InnoDB: 1.1.8 started; log sequence number 1595675 121123 11:33:34 [ERROR] Aborting 121123 11:33:34 InnoDB: Starting shutdown... 121123 11:33:35 InnoDB: Shutdown completed; log sequence number 1595675 121123 11:33:35 [Note] I try to do what mysql say me to do: mysql_upgrade Looking for 'mysql' as: mysql Looking for 'mysqlcheck' as: mysqlcheck Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' mysqlcheck: Got error: 2002: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) when trying to connect FATAL ERROR: Upgrade failed And yes, /var/run/mysql is empty: mysql_upgrade Looking for 'mysql' as: mysql Looking for 'mysqlcheck' as: mysqlcheck Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' mysqlcheck: Got error: 2002: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) when trying to connect FATAL ERROR: Upgrade failed And this is my file /etc/mysql/my.cnf # cat /etc/mysql/my.cnf |grep sock # Remember to edit /etc/mysql/debian.cnf when changing the socket location. socket = /var/run/mysqld/mysqld.sock socket = /var/run/mysqld/mysqld.sock socket = /var/run/mysqld/mysqld.sock Then I try to reinstall mysql from cero: apt-get purge mysql-client mysql-common mysql-server rm -R /var/lib/mysql rm -R /etc/mysql rm -R /var/run/mysqld userdel mysql apt-get install mysql-server mysql-client Then, after typing my root password for mysql I get this error: | Unable to set password for the MySQL "root" user ¦ ¦ ¦ ¦ An error occurred while setting the password for the MySQL administrative ¦ ¦ user. This may have happened because the account already has a password, or ¦ ¦ because of a communication problem with the MySQL server. ¦ ¦ ¦ ¦ You should check the account's password after the package installation. ¦ ¦ ¦ ¦ Please read the /usr/share/doc/mysql-server-5.5/README.Debian file for more ¦ ¦ information. And again I can't start mysql getting the same messages.

  Read the article

• qpid-cpp-client won't update through yum

  - by alexus

  somewhere around last week I received a notification for update, so I've tried "yum update" and that's what I'm getting... [alexus@wcmisdlin02 ~]$ sudo yum update Loaded plugins: refresh-packagekit Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package qpid-cpp-client.x86_64 0:0.10-3.el6 will be updated --> Processing Dependency: libqpidclient.so.5()(64bit) for package: matahari-service-0.4.0-5.el6.x86_64 --> Processing Dependency: libqpidclient.so.5()(64bit) for package: matahari-host-0.4.0-5.el6.x86_64 --> Processing Dependency: libqpidclient.so.5()(64bit) for package: matahari-net-0.4.0-5.el6.x86_64 --> Processing Dependency: libqpidcommon.so.5()(64bit) for package: matahari-service-0.4.0-5.el6.x86_64 --> Processing Dependency: libqpidcommon.so.5()(64bit) for package: matahari-host-0.4.0-5.el6.x86_64 --> Processing Dependency: libqpidcommon.so.5()(64bit) for package: matahari-net-0.4.0-5.el6.x86_64 ---> Package qpid-cpp-client.x86_64 0:0.14-22.el6_3 will be an update ---> Package qpid-cpp-client-ssl.x86_64 0:0.10-3.el6 will be updated ---> Package qpid-cpp-client-ssl.x86_64 0:0.14-22.el6_3 will be an update ---> Package qpid-qmf.x86_64 0:0.10-6.el6 will be updated ---> Package qpid-qmf.x86_64 0:0.14-14.el6_3 will be an update --> Finished Dependency Resolution Error: Package: matahari-net-0.4.0-5.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) Requires: libqpidcommon.so.5()(64bit) Removing: qpid-cpp-client-0.10-3.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) libqpidcommon.so.5()(64bit) Updated By: qpid-cpp-client-0.14-22.el6_3.x86_64 (sl-security) Not found Error: Package: matahari-net-0.4.0-5.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) Requires: libqpidclient.so.5()(64bit) Removing: qpid-cpp-client-0.10-3.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) libqpidclient.so.5()(64bit) Updated By: qpid-cpp-client-0.14-22.el6_3.x86_64 (sl-security) Not found Error: Package: matahari-service-0.4.0-5.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) Requires: libqpidclient.so.5()(64bit) Removing: qpid-cpp-client-0.10-3.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) libqpidclient.so.5()(64bit) Updated By: qpid-cpp-client-0.14-22.el6_3.x86_64 (sl-security) Not found Error: Package: matahari-service-0.4.0-5.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) Requires: libqpidcommon.so.5()(64bit) Removing: qpid-cpp-client-0.10-3.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) libqpidcommon.so.5()(64bit) Updated By: qpid-cpp-client-0.14-22.el6_3.x86_64 (sl-security) Not found Error: Package: matahari-host-0.4.0-5.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) Requires: libqpidcommon.so.5()(64bit) Removing: qpid-cpp-client-0.10-3.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) libqpidcommon.so.5()(64bit) Updated By: qpid-cpp-client-0.14-22.el6_3.x86_64 (sl-security) Not found Error: Package: matahari-host-0.4.0-5.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) Requires: libqpidclient.so.5()(64bit) Removing: qpid-cpp-client-0.10-3.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) libqpidclient.so.5()(64bit) Updated By: qpid-cpp-client-0.14-22.el6_3.x86_64 (sl-security) Not found You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest [alexus@wcmisdlin02 ~]$ any ideas?

  Read the article

• Windows XP long login (15 minutes +)

  - by Emily Pinkerton

  I'm having a lot of issues with our Windows XP SP3 machines (about 5, but every week another gets on the bandwagon of this issue). They take forever (15 minutes) to apply the user settings once our employee's enter their username and password to login to our domain. It only happens say if a user has reboot the machine and then when they go to log back in then it hangs forever. Reboot and restart are the key words for sure I've noticed with this issue. Here are things I have tested: •Made sure the DNS was set to point to our two servers (Server01 & Server02 are DNS Domain Controllers, 01 is primary and 02 backup). •No major changes have been applied to our network. •All profiles are local, so I have deleted out local profiles that aren't being used on those machines that run slow. •Also I have tried to enable and disable the Enable Fast Login under the local machines GP. It was not configured originally and when I tested both, it made the computer hang on "applying computer settings" for about 15 minutes. When it finally came up to the login screen the it was very quick to login to the domain. However this doesn't fix my issue, and even more frustrating upon setting it back to being not configured it now still takes for forever to apply computer settings. •I enabled the userenv log and here is what I see, but my experience is limited and I'm not sure how to read it exactly. (see below for log, this isn't the whole thing because it's really long) USERENV(2ec.2f0) 10:50:41:843 LoadUserProfile: LoadUserProfileP succeeded USERENV(2ec.2f0) 10:50:41:843 LoadUserProfile: Returning success. Final Information follows: USERENV(2ec.2f0) 10:50:41:843 lpProfileInfo-UserName = USERENV(2ec.2f0) 10:50:41:843 lpProfileInfo-lpProfilePath = < USERENV(2ec.2f0) 10:50:41:843 lpProfileInfo-dwFlags = 0x0 USERENV(2ec.2f0) 10:50:41:843 LoadUserProfile: Returning TRUE. hProfile = <0x818 USERENV(2ec.2f0) 10:50:41:984 IsSyncForegroundPolicyRefresh: Synchronous, Reason:NonCachedCredentials USERENV(2ec.248) 10:50:41:984 IsSyncForegroundPolicyRefresh: Synchronous, Reason:NonCachedCredentials USERENV(3c4.3dc) 10:51:26:166 LibMain: Process Name: C:\WINDOWS\system\wbem\wmiprvse.exe USERENV(2ec.5cc) 11:05:08:741 ProcessGPOs: network name is 192.168.49.0 USERENV(4a8.888) 11:05:08:804 GetProfileType: Profile already loaded. USERENV(4a8.888) 11:05:08:804 LoadProfileInfo: Failed to query central profile with error 2 USERENV(4a8.888) 11:05:08:804 GetProfileType: ProfileFlags is 0 Also this error is in the file quite a lot: USERENV(328.5bc) 11:05:29:733 GetUserDNSDomainName: Failed to impersonate user USERENV(328.834) 11:05:29:733 ImpersonateUser: Failed to impersonate user with 5. I'm really not sure what else to do with my limited experience, but I'm hoping someone can help me. I feel like I'm dealing with an issue way above my level and any knowledge I can gain out of getting this issue fixed would be amazing.

  Read the article

• Cannot browse network shares in Windows Explorer, but paths are still accessible

  - by Jeff Lockhart

  Windows Explorer has somehow corrupted itself and I'm not sure how to fix this problem. My Windows installation has been in use for a few years with network shares setup and working. Recently, I noticed that a program that I use to save network share paths to a database was no longer opening the explorer window to browse the path. It usually opens to the last path saved, but now it was just not opening at all. When I go to Windows Explorer to browse the network share directly, I get the error \\SERVER is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The specified network provider name is invalid. The network shares are just shares on the server itself (once saved to the database, they're used on the server as well as clients to reach files). The strange thing is, the files are still accessible from the program that uses them if I type the network share path in manually. So it is only a problem with Windows Explorer browsing the path. The reason I think there is some sort of configuration or setting, possibly in the registry, corrupted is that when the problem first manifest itself, I was somehow able to open an explorer window to a network share path, but the breadcrumb in the address bar did not function properly. It duplicated the share name folder at the top of the breadcrumb stack and when I clicked the second of the duplicated share folder, it crashed explorer.exe. I haven't been able to browse any network share path since this happened. I have tried using the IP address directly \\192.168.1.# as well as \\localhost and neither of those work either. I have tried running sfc /scannow and it did not find any errors. I tried ipconfig /flushdns and this made no difference. Attempting to map the network share to a drive fails using either the explorer GUI or net use command. Is there some way to reset Windows Explorer somehow to resolve this? I'd really like to avoid reinstalling Windows entirely if I can.

  Read the article

• OpenSSH does not accept public key?

  - by Bob

  I've been trying to solve this for a while, but I'm admittedly quite stumped. I just started up a new server and was setting up OpenSSH to use key-based SSH logins, but I've run into quite a dilemma. All the guides are relatively similar, and I was following them closely (despite having done this once before). I triple checked my work to see if I would notice some obvious screw up - but nothing is apparent. As far as I can tell, I haven't done anything wrong (and I've checked very closely). If it's any help, on my end I'm using Cygwin and the server is running Ubuntu 12.04.1 LTS. Anyways, here is the output (I've removed/censored some parts for privacy (primarily anything with my name, website, or its IP address), but I can assure you that nothing is wrong there): $ ssh user@host -v OpenSSH_5.9p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Connecting to host [ipaddress] port 22. debug1: Connection established. debug1: identity file /home/user/.ssh/id_rsa type 1 debug1: identity file /home/user/.ssh/id_rsa-cert type -1 debug1: identity file /home/user/.ssh/id_dsa type -1 debug1: identity file /home/user/.ssh/id_dsa-cert type -1 debug1: identity file /home/user/.ssh/id_ecdsa type -1 debug1: identity file /home/user/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA 24:68:c3:d8:13:f8:61:94:f2:95:34:d1:e2:6d:e7:d7 debug1: Host 'host' is known and matches the ECDSA host key. debug1: Found key in /home/user/.ssh/known_hosts:2 debug1: ssh_ecdsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/user/.ssh/id_rsa debug1: Authentications that can continue: publickey debug1: Trying private key: /home/user/.ssh/id_dsa debug1: Trying private key: /home/user/.ssh/id_ecdsa debug1: No more authentication methods to try. Permission denied (publickey). What can I do to resolve my problem?

  Read the article

• Impossible to create/format install window 7 on unpartioned HD

  - by fra pet

  Hi guys i am getting nut reinstalling windows 7 on one of those Acer aspire all-in-one... The original OS(windows professional x64) was not starting, after the initial screen the bios was prompted. So step 1: i tried to access the system partition and reinstall everything but could not get at the point step 2: i set the bios to native ide and i tried to insert my original copy of windows professional and do a clean installation, but it does not allow me to format/create other partion form the installation mask step 3: my BAD, i tried to install ubuntu and i clean the whole hard drive, i was getting an error at some point during installation so i decided to get back to windows step 4: Windows 7 again, at the disk screen of the windows installation i entered into the prompt and played around with DISKPART... -i listed the disk and the HD was disk 0. -i selected disk 0. -i CLEAN disk 0 successfully. -i tried to create a CREATE PARTITION PRIMARY but gave an error cache corrupt and disk not up-to-date (after i try to create a partiton in disk 0 it disappear when i try LIST DISK and i have to restart before he can list DISK 0 again, RESCAN did not worked). -tried CLEAN ALL(2 hours) and succeeded. -try again to create primary partition and failed, same errors -try to install my old copy of windows xP pro and it seems to work, it create a partition, format(only quick worked, slow mode was at 0% after 1 hour so i stop), it start installing and around 90% installation said it could not copy a file and he stop -back on windows 7 again, it says that the hard drive has 490+gb unpartitioned but won't create a partition and format. -i tried again DISKPART as i though i messed up with the MBR when i installed ubuntu, so i did all of the instruction below http://www.sevenforums.com/tutorials/20864-mbr-restore-windows-7-master-boot-record.html http://support.microsoft.com/kb/927392 the errors were: on bootsect: the systne partiton was not found, Data error cyclic redundancy check on bootrec /FixMbr: A device attached to the system is not functioning but did not worked, and still can not partiton/format/install on a blank HD i tried some bootable clean disk tool and start infinite loop on the same errors the bios setting are: sata: native ide. if i put AHCL(or something like that does not load the HD and the DVD). quick start/quite start: disabled. Are there any other option or tools i can try before i try change the HD(That is my last option)? Thanks to everyone.

  Read the article

• Adding a Microsoft Exchange 2010 account to my Windows Phone 7.5 mobile (Nokia Lumia 800) without trusted certificate

  - by MAXE

  I have problems in creating an account on my Nokia Lumia 800 (OS version: 7.10.8773.98, of course with Windows Phone 7.1 mounted with all updates) to one of my company's Microsoft Exchange 2010 server, because it cannot provide a trusted certificate...but only when contacting it from outside my network (like https ://mail.(CompanyName).com). Accessing the server from inside my network (pointing directly to the machine name or internal IP address: https ://(MachineName) or https ://10.0.1.200) gives me NO PROBLEM AT ALL! Setting correctly (I guess) all the parameters for the account (accessing from outside my network), the connection (after correctly set my credentials as asked) will not be established. It gives the next error (translated from my language manually): Error of <CompanyName> There is a problem with the certificate of (Server Address). Please contact support or the provider. Last try: X minutes ago Error code: 80072F06 I've tried all possible configurations and parameters (including the check The server requires an encrypted (SSL) connection, of course), but no way. EDITED: As suggested by Oliver Salzburg, I also tried this way without any results. I tried so: I went to my OWA (Outlook Web Access) that gives me the same problem (problems the certificate, it's not trusted) After accepting to continue, I clicked on the Error in Certificate button of the Internet Explorer 9 address bar - Show Certificates - page Details, show: - Copy to file... button - in the exporting wizard: Next - Binary encoding DER X.509 (.cer) (but there was also Base binary 64 X.509 (.cer), no way) - Next - saved to a new file From my Google Mail Account, I sent a mail to myself the certificate as attachment I read the mail from my WP7 phone, saved the attachment and then ran it: answering Yes to Do you wany to install the certificate? of course... Closed any active program and rebooted the phone Re-tried in synchronizing my account....:(...SAME PROBLEM! EDITED 2: Thanks again to Oliver Salzburg, I tried the next solution: I went to the site https://www.testexchangeconnectivity.com/ I selected Exchange ActiveSync option, as suggested I setted all my parameters, as I made for my phone I also setted the option Ignore SSL attendibility (and in another test I didn't) I performed my test This is the complete log (I removed my parameters): Seems the same problem (machine name in the certificate is different from the external Exchange website domain name?)! It is possible to get rid of this annoying (I know by myself who is this server!) problem? Thank you very much.

  Read the article

• Internet connection sharing between Windows XP and Windows 7

  - by Dave

  I bought my lil sister's netbooks for Christmas and I've been having a heck of a time trying to get Internet Connection Sharing to work. The host computer is a Windows XP box and it uses a US Cellular 3G modem dongle thingy to set it's Internet access. Additionally I have a hard wire plugged into the LAN1 port of the router described below. (I tried the WAN port out of desperation but things didn't seem happy that way.) Additionally they have a linksys router (can't remember specific model number, I will find this out) that I was using to take advantage of it's wireless capabilities. Originally thought about updating the router to use dd-wrt, but after reading the instructions it looked like to much of a pita (had to downgrade firmware, then install dd-wrt) to set up, eventually I caved, out of desperation, and ended up successfully installing dd-wrt on the router. I have DHCP turned off on the router, actually all I could select was DHCP forwarder. The netbooks both have windows 7 starter installed on them. Initially, I had the networks joined to a homegroup but I dropped that and everyone is able to see everyone in their respective network explorers. When I turn on Internet Connection Sharing on the host, its IP on the LAN changed to 192.168.0.1, so I arbitrarily decided to assign the router to port 192.168.0.100. When I connect the netbooks they get IPs dynamically. As I stated before, everyone can see everyone in the network explorer, and shares can be accessed. The weird thing is that everyone can ping the router but they cannot ping each others IPs. The status on the netbooks says that there is no Internet Connectivity. Another thing I tried was manually setting the DNS servers on the netbooks to the DNS servers that the host computer has. The funny thing is when I ping an outside domain such as google.com the IP address resolves, however I get no responses from the pings. When I tried plugging the host into the WAN port I could ping the router, nor could I access the router's web access admin. Another thing I tried was turning off the firewall on the netbooks and the firewall off on the host computer for the LAN connection, and they still could not ping each other. Also I thought I should be able to start a remote desktop connection but I couldn't do that either, I also checked to make sure that computers would in fact accept a request for remote desktop connections.

  Read the article

• Unable to connect to SVN server on VPS : Subversion Configuration Problem

  - by Pritam Barhate

  Hello everybody, I purchased a VPS account (centos-5-x86_64) from Hostgator mainly for the purpose of setting up an online Subversion Server. This is the first time I am managing a VPS and my linux skills are not so great, but I have basic knowledge of the OS and have been using it on and off as desktop from last few years. So after foxing through a few tutorials online, as the first step I logged in using SSH root account provided by Hostgator and tried to run, yum install mod_dav_svn subversion As it turns out my account has Cpanel/WHM and since it some concept of easy apache straight forward procedure of yum install mod_dav_svn subversion won't work. After that I found out how it can be worked out by compiling the source and stuff. But the whole procedure looked long and scary. [I am just a linux nub]. so I decided I would just skip whole apache integration stuff and just access the server using svn:// protocol, anyways that's how I configure svn on our LAN. So I installed subversion using yum install subversion It installed fine. Then I created a folder /svn_repos/testproject and ran svnadmin create /svn_repos/testproject/ No Problems Using vi I changed svnserve.conf and passwd files for the repository and added a user with my name. Anonymous users don't have any access, authenticated users have write access. Then I started svnserve using svnserve -d then in same terminal window svn list svn://localhost/svn_repos/testproject Asks for authentication for realm, provided root password then for svn username and password. Provided both. The command returns nothing but exists properly. Returns nothing is understood I didn't import anything. But if try to access svn remotely using in another terminal: svn list svn://ip.add.of.server/svn_repos/testproject svn: Can't connect to host 'ip.add.of.server': Operation timed out Is what I get. Parallels Power Panel that I got from Hostgator reports that: The firewall is not active now. To activate the firewall, choose one of the firewall operation modes. So if firewall is not running and I can access svn using localhost, why the operation is timing out when I try to access svn from a remote machine? Experienced network admins please help. Thanks in advance. Also please suggest a good book which gives detailed information on configuring Dedicated servers + WHM and CPanel.

  Read the article

< Previous Page | 523 524 525 526 527 528 529 530 531 532 533 534  | Next Page >