Search Results

Search found 7555 results on 303 pages for 'installing'.

Page 53/303 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

• Problem installing CanonMF5880dn

  - by Paul

  Just got a CanonMF5880dn and cannot print to it from Suse 11.1 MacBook prints w/o issue ping 192.168.1.103 no problem cups sees it as Canon MF5880/MF5840 PCL at URI socket://192.168.1.103:9100 cups test print appears to submit and complete job but no action from printer Yast also seems to install printer correctly CQue2 also seems to install printer correctly all attempts to print yield same results: Suse indicates job processed correctly and completely but no printing happens. firewall is off http://192.168.1.103 in FF gives me the printer config menus correctly What have I failed to do?

  Read the article

• why installing mysql-server wants to remove sysvinit

  - by E-rich

  I want to install mysql-server-5.5 in a new Debian Squeeze installation, but when I start to install it I get a warning that I don't see as being a requirement: WARNING: The following essential packages will be removed. This should NOT be done unless you know exactly what you are doing! sysvinit It looks like the upstart package will be installed to replace sysvinit. Will proceeding with the install cause damage? Can you help me understand why sysvinit needs to be removed for mysql-server to be installed? Is there a way to install mysql-server without removing sysvinit?

  Read the article

• Trouble installing Windows Embedded Standard 2009

  - by Tim

  Getting the following error when attempting to install: Error attempting to create the destination file: C:\Windows Embedded Data\Repositories\{25C88912-9870-4686-97CE-8244C A1B0DAB}.CAB. System error code: 5 Code 5 looks to be an "Access denied" issue. Not sure if this is a generic Windows error, or specific to this install. Any insight is appreciated! -Tim

  Read the article

• Installing Ubuntu: root failed on restart

  - by Jokerboy

  I just installed Ubuntu. At the end, it tells me to keep away the CD and to restart. After I restart it tells me: searching for boot record form ide-0..not found searching for boot record form cdrom..not found root failure press any key to continue reboot or select proper boot device. I have just one CD-ROM and one IDE hard drive.

  Read the article

• Installing libssh2

  - by Geoffrey

  Does anyone know how to install libssh2 into php on a windows environment?

  Read the article

• Ubuntu 12.04 issue installing Webmin modules (file does not exist)

  - by Arthur

  I'm running ubuntu 12.04. On this machine I have Webmin 1.580 installed. When trying to add a new module to Webmin I receive an error: "Failed to install module from : File does not exist" This happens when i go to Webmin Configuration Webmin Modules Select "Third party module from" Select "OpenVPN admin tool" and clicking on install module After I selected "OpenVPN admin tool" this url is being added: http://www.openit.it/downloads/OpenVPNadmin/openvpn-2.5.wbm.gz This URL resolves to a correct file. When uploading the file directly, the same error occurs. In the log file: /var/webmin/webmin.log nothing special is reported. How can I fix this issue? P.s. I run this server in CLI mode

  Read the article

• Installing Hyper-V Integration Components on Linux

  - by Lance Fisher

  Some big news this week was Microsoft released the Hyper-V integration components for Linux source code under the GPL v2. I just installed Ubuntu Server 9.04 in a Hyper-V VM with a Legacy Network Adapter. How do I install the integration components? Do I have to wait until they are included in the kernel?

  Read the article

• Installing OpenVPN on Windows7

  - by Darcara

  It seems I cannot install the current version of OpenVPN (2.1.2) because the TAP driver is not signed and therefore windows 7 x64 refuses to install it. It shows up in the device manager, but with a yellow exclamation mark. It's a fresh system, and OpenVPN was never installed before. When I start the OpenVPN client it seems to connect fine, but then it stops with CreateFile failed on TAP device: ... All TAP-Win32 adapters on this system are currently in use. How can I install the unsigned drivers, or are there signed drivers available somewhere ?

  Read the article

• Installing a personal security certificate for Windows Server 2008 Terminal Services user

  - by Rick

  We use StoneEdge Order Manager, which runs under Microsoft Access, on several Windows computers as well as through Terminal Services on Windows Server 2008. Terminal Services users are unable to process credit cards using the First Data Global Gateway on the server. We have followed the necessary setup instructions provided under the user account, which involves adding a certificate in the Internet Options control panel. The Windows XP desktops require this to be done, or a generic 'unable to connect' message is shown when attempting to charge a card. On the server, this message is shown regardless of whether the certificate has been installed. Is there anything else that needs to be done that is specific to Windows Server that is not mentioned in the workstation instructions? Setup Instructions

  Read the article

• Installing ubuntu server as linux distro on dell server - what drivers will be missed

  - by Cookie

  Dell (via USC) unpacks specific drivers for both RedHat and Suse to use after installation on its servers. As Ubuntu server isn't officially supported, this clearly isn't happening for Ubuntu. Is Ubuntu server then running with native drivers? In that case, which drivers are native with Ubuntu, and aren't (e.g. are Dell replaced) with RedHat/Suse? Are dell optimized drivers available for Ubuntu somewhere? Can the ones for RedHat or Suse be used with Ubuntu? Are there disadvantages of this lack of fine-tuned drivers, and if yes, what are they? Would they make the switch (and extra costs, as both RedHat and Suse Enterprise aren't cheap) away from the free Ubuntu server worthwhile? Dell recommends Canonical's commercial support for Ubuntu server on its machines, is this recommendable? Do they offer fine-tuned Dell drivers to replace native drivers?

  Read the article

• problem installing netbeans on freeBSD

  - by solomon

  hi guys, I want to install netbeans on my freeBSD7.2 machine.I followed the instructions listed in http://typo.submonkey.net/articles/2007/7/13/netbeans-on-freebsd But, when i try the third step, which is running the netbeans using "./netbeans/bin/netbeans" i found the following error "etc/netbeans.cluster" file cann't be found. What do u think could be the reason. I can't figure it out, plz help me. Thanx in advance

  Read the article

• Internet connection issues after installing Windows Phone 8 SDK

  - by Mosquito

  first of all I must admit, that I'm not good in all this network stuff. I am using Windows 8 OS. On my laptop (Lenovo G570) I have installed Windows Phone 8 SDK and shortly after this I started having weird issues with internet connection. When I start my laptop, internet usually works fine, but after a few minutes it starts slowing down so much, that I'm not able to open a single page. Rebooting doesn't work, after several disabling and enabling network adapter, it usually works again for a few minutes and then again it stops. I'm sure it has something to do with Windows Phone 8 SDK, because problems started with this. With SDK there was also installed "vEthernet (Internal Ethernet Port Windows Phone Emulator Internal Switch)" network adapter. It is worth to note that problems occur mostly in my school network, not at home. Both at home and school I am using Wi-Fi connection. I hope the information given are enough to help me. Thanks in advance for any answers!

  Read the article

• After installing Windows 8, boot hangs before BIOS setup

  - by Joe Purvis

  I have an Alienware M15x, 940MX processor, 16 GB RAM, 512GB M4 SSD, and I was running Win7 64bit. I backed up the disk and ran Win 8 setup. Setup appeared to go well through multiple reboots. After the last reboot, it simply stopped after POST at "Press F2 for bios setup". I have tried powering off, reducing RAM to one stick, removing MOS battery. Now, it gets to the screen with "Press F2 for setup" and "Press F12 for boot options". If I press F2, I get a single beep only. If I press F12, nothing. I cannot get into the BIOS to change boot options to boot from another disk and restore. I do have the latest BIOS. I am going to try replacing the CMOS battery, but I don't think that is likely to help. The computer has been fast and very reliable until now.

  Read the article

• Router not assigning an IP address after installing OS X 10.6

  - by Vaibhav Bajpai

  I recently installed Mac OS X 10.6, however the ethernet state is down. The assigned IP is 169.x.x.x. When booted the live USB of Ubuntu, I properly get an IP assigned in the range 192.168.1.x from the router 192.168.1.1 I am using the same router and same ethernet line. I tried to ping to 192.168.1.1 from my Mac and I get a host down message. I tried to manually assign the IP and set the router IP to 192.168.1.1 but still the router is unreachable.

  Read the article

• Cisco Unifies Communications Manager 7.0 - Installing Extension Mobility

  - by Lance

  I've setup extension mobility to the best of my ability, however, it its perplexing me... From the materials I've been reading I have established I need to have the following URL in place: http://IP/emapp/EmAppServlet?device=#DEVICENAME# If I try and browse to this in a web browser I can a blankHTML page. When my registered phone (CIPC) presses Services - Extension Mobility, it just sits there / delivers a blank page. I figure this isn't coincidence... Any ideas?

  Read the article

• Installing a new Motherboard in a HP xw6200 case

  - by thing2k

  I have a HP xw6200 Workstation, that is rather long in the tooth, and with 2 physical CPUs, it is quite inefficient. So, the plan was to upgrade the internals. Nothing special: AMD Athlon II X4 640 ASUS M4A78KT-M LE (mATX) 2x 2GB DDR3 1333MHz RAM. 3p under my £150 budget The issues: The pin connector for the front panel isn't a good fit, but I can trim it to size. The PSU has a 8-Pin Power connector, unsurprisingly, the new board has a 4 pin socket. The pins do line up, but I would have to cut it in half to fit. Finally, due to the weight of heat-sinks, they are screwed directly into the case. It turns out that these screws also lock the motherboard in place. As to remove it, you remove the heat-sinks, slide the motherboard across and lift it out. I tested the new board for fit, and while it slots in fine, it's not secure. There is nowhere to screw the board down, it is just held in place with plastic standoffs. The only idea I had, was to wedging something between the side of the motherboard and part of the case. Any suggestions?

  Read the article

• Unknown device error installing Lexmark printer in Vista

  - by packotjimmy

  I have been using Lexmark X3650 All-In-One on my Windows Vista Desktop PC for a year without problem. Yesterday, I was prompted to plug in the USB from the printer and after that I got errors: "The USB device has malfunctioned." ,"The unknown device has been installed unsuccessfully.". Then, the printer just stoped responding. I have uninstalled the driver from Device Manager and software (using Lexmark's clean utility), rebooted, reinstalled, same thing, tried different ports/cable. Vista displays these two errors stated above immediately upon plug in. Please help me!

  Read the article

• Can't boot Windows after installing Linux

  - by user4035

  I have a partition /dev/sdb1, where my old Windows XP resides. All the files are there intact and I can see them, mounting the disk from Linux. Linux is on /dev/sdb2. But when I choose Windows in LILO prompt, it doesn't load. I have the following lilo.conf: boot = /dev/sdb # Linux bootable partition config begins image = /boot/vmlinuz root = /dev/sdb2 label = Linux read-only # Partitions should be mounted read-only for checking # Linux bootable partition config ends # Windows bootable partition config begins other = /dev/sdb1 label = Windows table = /dev/sdb # Windows bootable partition config ends What can be wrong?

  Read the article

• Installing Windows 8 to another computer with an OEM product Key

  - by user180671

  Questions come up after reading the article about the new method Microsoft uses to License windows 8 computers. Let say I bought a Brand new laptop with windows 8 preloaded. Not like the old way, there is no OEM sticker in the back of the computer which can be used for reloading system.(new product key is stored in BIOS as mentioned in the article, the key can be pulled out by using a software anyway). Is it possible to install windows 8 on another computer with that particular key in case the computer is totally damaged? Here is what i tried: First, I extracted the key with a software name "windows 8 key viewer". using the windows 8 upgrade tool to determine what copy of windows 8 I should download for the installation. The tool did correctly recognized the key as a legitimate one. but it claims that key can not be installed with a retail media (Since it is an oem key). Does this mean the only way to do it is to use an OEM CD from the manufacturer? Will ISO from MSDN source do? or it is just not possible??

  Read the article

• Installing grub2 on ubutntu with software raid mirroring

  - by Marko

  Hi guys, Can someone help me out on this? I accidentally installed grub on usb flash drive during ubuntu server installation. Now I cant boot system without drive attached to server. I want to install grub on hard drive with grub-install but i don't know what to set as location for boot loader? my fstab looks like this: file system mount point type options dump pass proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/pdc_jdbeghhjg1 / ext4 errors=remount-ro 0 1 /dev/mapper/pdc_jdbeghhjg5 none swap sw 0 0 and partition tables for hard drives as this: Device Boot Start End Blocks Id System /dev/sda1 2048 1215662079 607830016 83 Linux /dev/sda2 1215664126 1249998847 17167361 5 Extended /dev/sda5 1215664128 1249998847 17167360 82 Linux swap / Solaris Device Boot Start End Blocks Id System /dev/sdb1 1 75672 607830016 83 Linux /dev/sdb2 75672 77809 17167361 5 Extended /dev/sdb5 75672 77809 17167360 82 Linux swap / Solaris ?

  Read the article

• "Disk boot failure" error after installing Windows 7 on SSD

  - by Tony_Henrich

  I have a system with 3 SATA drives which runs fine. Got a new SSD drive and wanted to install a fresh Windows-7 on it. So I removed the boot drive and replaced it with the SSD drive. Installed Windows and when it was done, rebooted and now I get "Disk boot failure. Insert system disk and press enter" error message. I reinstall again and still same message. Removed the SSD and put back the original drive and I got the same message!! I checked the BIOS and things look good. Something is wrong. Two questions: 1- Why isn't the new Windows booting from the SSD? 2- Why isn't the machine booting using the previous working configuration anymore, after removing the SSD? I did connect it during the second Windows installation but it was the last drive in the SATA connector. Would Windows installer mess with its MBR sector?

  Read the article

• Installing/dual-booting Fedora 17 on existing Windows 7 HDD

  - by Moose4

  I have a 64-bit Windows 7 install as the only partition on a 1 TB HDD, with about 350 GB free. I would like to install Fedora 17 as a dual-boot option on this system and give it about 100 GB to play with. If in the Fedora install utility I choose to shrink the W7 partition by 100 GB to give it space, will that cause me to lose my existing W7 data? And how do I go about setting up dual-boot (with Windows 7 as the default)?

  Read the article

• VMware Fusion on MacBook Pro running Vista, not working after installing a wireless card

  - by Shelley

  A tech friend installed VMware on my Mac so I could use my Windows programs as well. It worked great until I inserted my Sierra 881 USB wireless card while in VMware trying to get to the internet while on the road. It worked briefly, then the AT&T Communication manager won't respond when you click on the icon, I can't open Network and Sharing center, I can't sync my palm - shows it can't connect. Looks like it messed up several things, along with not being able to connect to the internet while in windows. This wireless cards works directly from the Mac - but I need internet while in Windows for some work I am doing. How do I uninstall this - when I try - it just gives me an endless reloading circle - not doing anything. I really need to sync my palm and get back to the way it was. I don't know much about VMware at all and I don't have access to my friend right now to get help.

  Read the article

• Installing Windows XP through Pen Drive

  - by OrangeRind

  I want to install Windows XP on My desktop computer (only XP) but my cd drive has gone bust. I have tried to search for installation tutorials but I found only those in which people tell me how to install it ON the pen drive rather than FROM the pendrive. Please help out! Thanks in Advance

  Read the article

• Recovering damaged external hard disk by installing internally

  - by nfarshchi

  I had a 1TB Western Digital (My book series) 3.5" USB3. One day, the SATA to USB3 converter board was damaged and has not worked since. I decided to open the cover and use the HDD as an internal HDD. When I attached the HDD to my PC and booted up in Windows, it asked me which type of ????? I want to use "MBR or GBR" (I dont remember the exact question) I chose MBR and Windows gave me a 1TB empty Hard drive. I tried to recover with recover my files and some other recovery programs but no success. Some one told me that you should choosed GBR instead of MBR . How can I do that now? Another guy told me that the SATA to USB3 converter board is coded to save data on HDD and you can not use them internally without losing data, and I should find another SATA to USB3 board (exact same). It is impossible to find because they are not produced any more. Please help me to find a solution to bring back my data. UPDATE I have 1TB WD "Mybook" USB 3. the board that convert sata to usb3 was damaged. so when the HDD was in the box computer did not recognize it. I opened the box and remove HDD to use it internal. after connecting to my PC windows showed me one massage that I had two choice MBR or GPT I choosed MBR one and windows gave me 1TB empty new volume. I tried many recovery software to recover my data but no success. I brought it to one expert recovery company and they told me the converter board (SATA to USB3) make some encryption on data and with out that board you cannot recover any thing. so I bought another empty WD box and put the HDD inside but even after that also there is no file. I tried to recover again in this state but no success. so I have some unanswered question. does this converted boards make any password or encryption? if yes how can I solve it? does using many recovery programs affected my data? any suggestion or solution for bring back my data? I had use recovery programs such as : recover my files , EaseUS data recovery, easy recovery, test disk, Ontrack easy recovery . Note: when I was using test disk it asked me to choose which partition table I want to use. as it was I choose NTFS, does this made any change on data?

  Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >