Search Results

Search found 22139 results on 886 pages for 'security testing'.

Page 532/886 | < Previous Page | 528 529 530 531 532 533 534 535 536 537 538 539  | Next Page >

• X-FI optical output not being recognized.

  - by Luciano

  Hello there! I have an issue and I don't know what to do! I have a SoundBlaster X-FI Xtreme Gamer, which has a spdif mini-optical output. I have it connected to a home theater, via a toslink cable and an adapter to fit in the mini plug. It used to work perfectly, but now it doesn't anymore. There is light travelling through the cable, but the HT doesn't pick up the signal. The sound card of the motherboard also has an optical output (regular, not mini) and it works ok, so the cable and the HT are fine, I think. What else should I try? Thanks, Luciano. PS: I only enabled the onboard card for testing, but usually it's disabled to avoid any kind of conflicts. PPS: I'm using Windows 7 64bit with latest drivers of everything, but like I said. It used to work.

  Read the article

• windows 7 issues with local domain name

  - by Phill

  Until recently my operating system was XP where for the purpose of development and testing of php and zen cart I set up xampp that included apache http server and mercury mail server I also made changes to C:\Windows\System32\drivers\etc\hosts as follows: 127.0.0.1 www.zen.com # For browser access 127.0.0.1 mail.mercury.com # For email access 127.0.0.1 mercury.com # For mercury mail server This allowed the use of www.zen.com in the address bar of my browser rather than 'localhost' and mail.mercury.com to access email via thunderbird. All was well. Then I installed windows7, I made all the mods and again everything appeared to run as expected.Then I turned off my wireless modem causing all working local connections to fail. Localhost in the address bar still works but not www.zen.com and thunderbird 'cannot find mail.mercury.com' Is there some way to overcome what ever is causing this.

  Read the article

• The meaning of thermal throttle counters and package power limit notifications in Linux

  - by Trustin Lee

  Whenever I do some performance testing on my Linux-installed MacBook Pro, I often see the following messages in dmesg: Aug 8 09:29:31 infinity kernel: [79791.789404] CPU1: Package power limit notification (total events = 40365) Aug 8 09:29:31 infinity kernel: [79791.789408] CPU3: Package power limit notification (total events = 40367) Aug 8 09:29:31 infinity kernel: [79791.789411] CPU2: Package power limit notification (total events = 40453) Aug 8 09:29:31 infinity kernel: [79791.789414] CPU0: Package power limit notification (total events = 40453) I also see the throttle counters in the sysfs increases over time: trustin@infinity:/sys/devices/system/cpu/cpu0/thermal_throttle $ ls core_power_limit_count package_power_limit_count core_throttle_count package_throttle_count $ cat core_power_limit_count 0 $ cat core_throttle_count 41912 $ cat package_power_limit_count 67945 $ cat package_throttle_count 67565 What do these counters mean? Do they affect the performance of CPU or system? Do they result in increased deviation of performance numbers? (i.e. Do they prevent me from getting reliable performance numbers?) If so, how do I avoid these messages and increasing counters? Would running the performance tests on a well-cooled desktop system help?

  Read the article

• How do I send mail from Tripwire using SMTP?

  - by ThomasG33K

  I have just installed tripwire using Ubuntu repos and have gone into the configuration files and changed everything to what I want. When in comes to the options for SMTP mail method and the server and port to use, I am stumped. When I run the test email I get this error message. /usr/sbin/tripwire --test --email blah@nowhere Sending a test message to: blah@nowhere ### Error: The SMTP connection could not be established. ### Server: localhost ### Exiting... Email test failed. I have made appropriate changes to the firewall. I don't have an smtp server installed. Do I need to? Any other ways I could use without installing an SMTP server due to security issues?

  Read the article

• Toshiba Satellite error 10053A0000 when re installing windows xp home on an existing windows 7

  - by Jayapal Chandran

  I had installed windows 7 for testing. Now i want to re-install windows xp home original. I am using the toshiba installation(recovery) disk. The installation process asked a few questions. I selected the option to retain other partitions and to delete only c drive. In the next step i got this error. http://web1.toshiba.ca/support//techsupport/tsbs/all/-tsb001404.htm So, what should i do to retain my files in d drive and only allow the installation to delete c drive?

  Read the article

• Redmine: reposman.rb succeeds, but does not make SVN repos available to projects

  - by Joey Adams

  I'm testing reposman.rb on the command-line (before I make it a cron job): /usr/sbin/reposman.rb --svn-dir=/var/svn \ --redmine-host=http://example.com/projects --key='redacted' \ --owner='nobody' --group='nobody' It succeeded, printing messages for projects that didn't have repos yet: repository /var/svn/project1 created repository /var/svn/project2 created And printed nothing after running the same command again, indicating it remembered the repos. However, if I look at the Repository settings in Redmine for project1 and project2, they aren't set. Although the SVN repo is created, the Redmine projects aren't configured. How do I get reposman.rb to automatically configure Redmine projects to use the repos after they're set up?

  Read the article

• EC2 out of space on root disk, moving it to ephemeral

  - by Joseph Misiti

  I am spawning a few test servers on ec2 that happen to be m1.larges. I am using these test servers for load balancin testing. Anyways, most of the servers I have used before have been backed by EBS, but these instances (ubuntu 11.04) obviously come with a lot of ephemeral space located @ /mnt. What I noticed that is happening is I am running on space on the root disk. I am trying out this tutorial http://www.turnkeylinux.org/docs/using-instance-storage moving my /home + /usr directories to /mnt and then remounting them. This works except it does not survive a reboot. Am I missing something here or is this tutorial not completely correct. How do I make space on my / drive so I can do stuff and survive re-boots.

  Read the article

• Is there a maximum of open files per process in Linux?

  - by Malax

  My question is pretty simple and is actually stated in the title. One of my applications throws errors regarding "too many open files" at me, even tho the limit for the user the application runs with is higher than the default of 1024 (lsof -u $USER reports 3000 open fds). Because I cannot imagine why this happens, I guess there might be a maximum per process. Any idea is very appreciated! Edit: Some values that might help... root@Debian-60-squeeze-64-minimal ~ # ulimit -n 100000 root@Debian-60-squeeze-64-minimal ~ # tail -n 4 /etc/security/limits.conf myapp soft nofile 100000 myapp hard nofile 1000000 root soft nofile 100000 root hard nofile 1000000 root@Debian-60-squeeze-64-minimal ~ # lsof -n -u myapp | wc -l 2708

  Read the article

• Virtualmin - Added Virtual Server - Stopped access to Rails app?

  - by Dan

  Hi, Sorry if this sounds pretty simple, I'm new to Virtualmin and running servers in general. I recently purchased a VPS and installed Virtualmin with no problems. I then installed mod_rails and uploaded my first rails app, which I got working by adding the following to my apache httpd.conf file: <VirtualHost *:80> ServerName testing.mydomain.com DocumentRoot /home/myapp/public <Directory /home/myapp/public> Allow from All AllowOverride all Options -MultiViews </Directory> RailsBaseURI / </VirtualHost> I then tried adding a virtual server through Virtualmin, using mydomain.com. Now, the site this created (plus several sub-servers) and working as expected. However, my original Rails app is no longer accessible. The URL now sends me to the parent application (ie mydomain.com) The Rails app is not located within the parent's application directory, would this be a problem? Can anyone help? Any advice appreciated. Thanks.

  Read the article

• How to set printer permissions using PowerShell / some other script?

  - by Borek

  I need to update printer's permissions in a script, i.e. do the same as I would manually do this way: Open Devices and Printers applet Double-click the default printer (open its queue) Go to Printer - Properties In the properties dialog, go to Security tab Change permissions for Everyone (e.g., check Manage documents permissions) How to do that? For example, in PowerShell, I can do Get-WmiObject -class win32_printer -filter Default=True to get the default printer and there are then methods getSecurityDescriptor() and setSecurityDescriptor() but for instance this command: (Get-WmiObject -class win32_printer -filter Default=True).getsecuritydescriptor().Descriptor return null so I'm not sure if I'm doing it the right way. Does anyone have a working example to set printer permissions? Am I on the right path or should I use something other than WMI entirely? Thanks.

  Read the article

• xinet vs iptables for port forwarding performance

  - by jamie.mccrindle

  I have a requirement to run a Java based web server on port 80. The options are: Web proxy (apache, nginx etc.) xinet iptables setuid The baseline would be running the app using setuid but I'd prefer not to for security reasons. Apache is too slow and nginx doesn't support keep-alives so new connections are made for every proxied request. xinet is easy to set up but creates a new process for every request which I've seen cause problems in a high performance environment. The last option is port forwarding with iptables but I have no experience of how fast it is. Of course, the ideal solution would be to do this on a dedicated hardware firewall / load balancer but that's not an option at present.

  Read the article

• CentOS disable filesystem check: superblock last mount time is in the future

  - by Zac B

  I'm persistently getting the "Superblock last mount time is in the future" error when booting CentOS 6. I've seen other questions which ask how to resolve this error, but I know exactly why it's occurring: our development/testing VMs regularly have their date set to times far from the present, and have all of their filesystems remounted. What I want to know is: how do I disable all consistency checking for superblock mount time in centOS? I've tried tune2fs -i 0 <device> and setting buggy_init_scripts=1 in /etc/e2fsck.conf and neither has worked; the problem persists.

  Read the article

• cannot mount remote partition using fstab/fuse

  - by HorusKol

  Using a combination of http://ubuntu-tutorials.com/2007/01/02/mount-remote-directories-securely-with-ssh-ubuntu-6061-610/ and http://www.tuxfiles.org/linuxhelp/fstab.html I figured I could mount the root of another computer to somewhere on my new laptop to make it easier to transfer files and stuff. Now, I can connect through SSH and browser the files through an ad-hoc mount - but I would like to be able to do this automatically, and so had a look at fstab. my new entry in fstab is: remote_comp:/ /var/remote_comp fuse defaults 0 0 but testing with mount -a results in the following error: /bin/sh: remote_comp:/: not found I thought the problem was because I was trying to mount the root of the other computer, but even trying sub-directories result in the same error message.

  Read the article

• Can't access Administrator account on Windows XP after adding local user account

  - by bwerks

  I have an installation of windows XP, and it's not part of a domain. Previously, it just had only the administrator account, and upon creating a different user account, all access was lost to the administrator account. When the machine starts up, only the new local account is offered for login, which seemed strange. I've checked that the administrator account was not disabled, nor are any rights missing from the local security policy. Furthermore, the administrator account is accessible via remote desktop, where an opportunity is given to type the desired account. REALLY strange. Upon deletion of the new local user account, the administrator account appeared again. Can anyone tell me what's going on?

  Read the article

• NTFS write speed really slow (<15MB/s) on Ubuntu

  - by Zulakis

  When copying large files or testing writespeed with dd, the max writespeed I can get is about 12-15MB/s on drives using the NTFS filesystem. I tested multiple drives (all connected using SATA) which all got writespeeds of 100MB/s+ on Windows or when formatted with ext4, so it's not an alignment or drive issue. top shows high cpu usage for the mount.ntfs process. AMD dual core processor (2.2 GHz) Kernel version: 3.5.0-23-generic Ubuntu 12.04 ntfs-3g version: both 2012.1.15AR.1 (Ubuntu default version) and 2013.1.13AR.2 How can I fix the writespeed?

  Read the article

• Graphics card failure, anything I could try...

  - by ILMV

  My gaming PC has decided to die, it's not the first time but usually a quick ATX reset brings it back to life. Today it didn't. I disconnect all unessasary devices so I've only got the case button / LED cables, GPU, CPU, RAM and power connected, the computer still didn't turn on. I've not got a speaker on my motherboard so found a spare one I have for testing and when the machine starts up I get one long beep and two short beeps from my Award BIOS, which apparently means a video card error. I change it with the GPU from another machine and all works well. Q: So I have a faulty graphics card (an nVidia 8800GT OC), is there anything I can try to resurect it?

  Read the article

• Server Performance

  - by Burt

  We have a dedicated server that we use to stage websites (our test server). The performance of the server has become really bad and we regularly have to restart it. When performance is poor I have checked task manager for the processes and memory but everything looks OK. We use a content management system and it is always when using the admin section of this CMS that we notice the performance degrade which makes me think it may have something to do with DB calls the CMS is making. Does this sound viable? Any other sggestions of how I can go about testing this? Thanks in advance...

  Read the article

• win2008 r2 enterprise "Message Queuing" "Access is denied" "The list of messages cannot be retrieved"

  - by gerryLowry

  on my win7, I run compmgmt.msc and drill to a private queue folder ... when I click "Queue messages" or "Journal messages", I either see the messages, or "There are no items to show in this view". BUT, on win2008 R2 Enterprise, I run compmgmt.msc and drill to a private queue folder ... when I click "Queue messages" or "Journal messages", I see "There are no items to show in this view" which AFAIK is correct BUT I get this unwanted dialog: Message Queuing x ------------------------ (X) The list of messages cannot be retrieved. Error: Access is denied. [[ OK ]] On both computers, I'm a member of local Administrators. I'm concerned as a developer because I'm very soon going to be testing WCF/MSMQ software that works on my Win7 laptop. How to I get past this denied access problem? thnx / g.

  Read the article

• esxi change MKS port

  - by Daniel Powell

  I need to connect to my home esxi box over the web however I cannot use the default port 902 for the console viewer due to firewall restrictions. Is there a way to change this port somewhere even if i can just do some nat and redirect any other port to that port? I've had a look around and when I try to connect to the esxi server in vSphere client I cant find anywhere I can specify the port. I know this is not the recommended way to do this but its a testing server and security is not an absolute must on this box. I also cannot setup a vpn to this box.

  Read the article

• Wireless Repeating with two Netgear N750 (WNDR4300)

  - by jomo1911

  I have a Netgear N750 as my main router, which connects to the internet via a modem. I have a second Netgear N750 which I want to use to repeat the wireless signal of the main router. I logged in to routerlogin of my main router (192.168.1.1) and set up the "Wireless Repeating Function". I set it as the "Wireless Base Station" and filled in the MAC adress of my second Netgear N750. Then I logged in to routerlogin of my second router and set it up as the "Wireless Repeater", I gave it the IP 192.168.1.11 and filled in the MAC adress of the base station. During the setup of the second router (Repeater) I had to disable all security functions. If I connect to the repeaters' WLAN signal, I get no internet connection. Maybe you can help me, thanks

  Read the article

• raspberry pi for web programming/development

  - by Mark Dee

  I'm into web development and my machine (AMD Phenom II, 8G RAM) is running Ubuntu 13.04. I love my current setup but I kinda miss some of Windows software like MSOffice or Adobe suites, and running on Virtualbox doesn't feel as snappy for me.... So I'm thinking of buying a new cheap machine where I would install Linux and do my development work there and have my current machine run Windows. I just found this thing called Raspberry pi which is really cheap and requires 12v only (I think) which makes it good for downloading stuff overnight. So, does it make sense to buy Raspberry pi, make it my primary dev machine, Windows being the secondary (for Adobe and browser testing of course)? Basically, I want to know if Raspberry pi meets the following requirements: It should run ArchLinux Sublime Text 3 python ruby nginx nodejs Deluge or Transmission (well, maybe just those, no need for videos and music players)

  Read the article

• Mac OS X: All bootcamp options start Windows

  - by Brian Heylin

  I just installed the latest security update on Mac OS X (installed on 2-10-2010). On restart my Mac booted in Windows 7, which I had installed previously and was set not to boot by default. I tried to restart holding the alt key, and selected the Mac OS X partition, but still the Windows 7 partition boots. It does not matter what partition I choose, Windows 7 always boots. I took a look in the OS X partition and noticed that the admin home folder is empty, or at least Windows is not showing any files there. There is another user on OS X and I can see their files no problem. This has me stumped, has anyone any suggestions for a finding a solution?

  Read the article

• Building a DVR system for use with custom windows application (video analytics)

  - by Michael

  Is there a good PCIe DVR capture card that has at least 4 channels as well as the hardware encoding? It would have to have decent driver support in Windows xp or windows 7. I have looked at various video capture cards as well as an integrated video capture card/motherboard from Huperlabs. But so far I have not found one with a decent review and that has good driver support that I can verify. A really small card would be nice because I am trying to get a fairly small form factor. Huperlabs stuff is pretty awesome but they are slow to get back to me and they bundle their analytics software with the hardware (extra cost for nothing) The dvr is being used for security.

  Read the article

• Advantages / disadvantages of having DynDNS access on a computer vs the router

  - by Margaret

  I have a shiny new toy, a Cisco Wireless-N Gigabit Security Router with VPN (WRVS4400N). While looking through the instruction manual, I discovered that it had support for DynDNS built-in. We've currently got the DynDNS client running on one of the servers (that people SSH to, as documented in this question); but the reason for the router update is to move away from SSH to VPN. To that end, is there any difference in behaviour/functionality/maintainability to run it off the computer, as opposed to the router? Thus far, DynDNS has more or less a set-and-forget setup, but since the feature was there, I wanted to know if it was a better location for the process...

  Read the article

• Unable to delete a directory from NTFS drive: "Access is denied"

  - by Evgeny

  I'm running Windows XP Pro x64 SP2. I have a directory on an NTFS drive that was created by a Maven build. A subsequent build attempted to delete this directory and failed. I now get the error "Access is denied" whenever I try to do anything with that directory: change to it, delete it, rename it. This happens both in Windows Explorer and from a command prompt. The properties dialog in Windows Explorer doesn't even contain the Security tab. I created the directory, so I don't think this is truly a permissions issue. I've occasionally had this error happen in the past is well. I believe the error is misleading, but the question is: what is the real problem and how do I fix it?

  Read the article

< Previous Page | 528 529 530 531 532 533 534 535 536 537 538 539  | Next Page >