Search Results

Search found 30658 results on 1227 pages for 'off screen'.

Page 538/1227 | < Previous Page | 534 535 536 537 538 539 540 541 542 543 544 545  | Next Page >

• 12.04 reboots rather than shutting down

  - by Luca

  I have a ruvo with a fresh installation of 12.04. When I try and shutdown the computer reboots. Until I upgraded (by doing a fresh install) I ran it with Ubuntu 10.04 and I didn't have this issue. I have tried sudo shutdown -h now sudo shutdown -P now sudo init 0 sudo poweroff All of these cause a reboot. I have added acpi=norq to my grub file as suggested by someone in the first post below. This is being used as a mythtv frontend and I would like the power button to shut it down. I have modified the button to perform a shutdown -h now, but this too causes a reboot. I have studied the posts below and tried some of these ideas, but with no luck so far. Why do I get a reboot instead of a shutdown? Ubuntu 12.04 not shutting down properly Stuck on reboot and shutdown Shutdown does not power off computer

  Read the article

• Things to do to port game made for iOS in Unity to Android?

  - by 2600th

  I have just made my first game for iOS and submitted it to app store. I was thinking of porting my game to Android also. I would like to know things one need to do/remember to port game made for iOS in Unity to Android. How to handle different screen resolutions and pixel densities, optimizations required, etc. Any other suggestions and important things you think I should know? EDIT: Also, should I handle builds according to device resolutions or by pixel density?

  Read the article

• Cannot boot Windows 7 after installing Ubuntu 13.04

  - by whowantsakookie

  So I boot up my computer after installing Ubuntu 13.04. Grub correctly shows me all available boot options and I am able to boot to Ubuntu. However, when I try to boot into Windows 7, grub hangs at a purple screen. I have an HP laptop. It came with all four primary partitions taken up by the Windows bootloader, the actual Windows partition, one called HP_TOOLS, and another for HP Restore. I was able to back up and delete HP_TOOLS and the recovery partition, and change my disk type from Dynamic to Basic (GParted doesn't recognize Dynamic drives). I then booted into a live session of Ubuntu and made two partitions with GParted: one large partition for storage space that I could use between the two operating systems (sda4), and another extended partition (sda3) which contained Ubuntu (sda6) and it's swap space (sda5). It currently looks like this: I'm not sure if the second paragraph is actually relevant, I just want you to know all the variables in the equation. Thank you in advance for helping this poor noob.

  Read the article

• Chrome Mobile: The Mobile Web Developers Toolkit (Part 1)

  Chrome Mobile: The Mobile Web Developers Toolkit (Part 1) Building for mobile web requires a different mindset than desktop web development, and a different set of tools. The tools we're used to using often aren't available or would take up too much screen real estate. And going back to the dark ages of tweak/save/deploy/test/repeat isn't exactly optimal, so what can we do? Thankfully there are a number of great options - from remote debugging to emulation, mobile browsers are offering more and more tools to make our lives easier. We'll take a look at a couple of tools that you can use today to make cross platform mobile web development easier and then peer into the crystal ball to see what tools may bring in the future. Join us for Part 1 - as we take a look at a few boiler plates, frameworks and helpful libraries for building the mobile web. From: GoogleDevelopers Views: 0 0 ratings Time: 01:00:00 More in Science & Technology

  Read the article

• win rt game project to android [closed]

  - by Inderjeet

  I have develop game on windows for winrt in visual studio using cocos2d-x,i just want to port it to android in c++ in the guidance of http://www.jesusbosch.com/2012/06/how-to-set-up-android-and-win32-cocos2d.html this,but i get error while compilling the code on cygwin that errors are below CYGWIN environment variable option "nodosfilewarning" turns off this warning. Consult the user's guide for more details about POSIX paths: http://cygwin.com/cygwin-ug-net/using.html#using-pathnames ERROR: Your GNUMAKE variable is defined to an invalid name: /usr/bin/make Please fix it to point to a valid make executable (e.g. /usr/bin/make) i have install many times cygwin but did not have get make.exe in folder c:/cygwin/usr/bin how can i overcome from this error Thanks Inderjeet Kumar

  Read the article

• Desktop Fun: Ocean Life Wallpaper Collection

  - by Asian Angel

  Our oceans are full of beauty and wonder, a separate world waiting for us to explore its’ mysteries and stir our imaginations. Bring the wonders of the underwater world to your desktop with our Ocean Life Wallpaper collection. Note: Click on the picture to see the full-size image—these wallpapers vary in size so you may need to crop, stretch, or place them on a colored background in order to best match them to your screen’s resolution. What is a Histogram, and How Can I Use it to Improve My Photos?How To Easily Access Your Home Network From Anywhere With DDNSHow To Recover After Your Email Password Is Compromised

  Read the article

• Trying to install/dual boot

  - by user292236

  I have widows 8 (Pre-installed), and I was not a fan. So I thought I would try Ubuntu as many people from what I hear that use it, like it, and hey, free OS. Well before I was able to do all the instalations, I had to goto work, so my girlfriend (whio is not at all tech savy) decided to help. She told me she installed it, (It popped up with a thank you for installing message) She then shut it off. When she turned it on, when I turn it on, I boot right to windows, I have never installed a secondary OS. And I was hoping someone with more experiance than I could walk me through what I need to do in order to be able to dual boot Ubuntu version is 14.04 and 64bit

  Read the article

• Adding gesture recognizer (or dragging) to CCSprite

  - by user339946

  I'm trying to allow a CCSprite to be dragged across the screen. I've succeeded so far by doing it on a Layer level (from this tutorial). However, this only allows ONE sprite to be dragged at a time as the method implementation can only identify a single sprite to move at a time. I'd like to be able to perhaps add a gesture recognizer or somehow implement ccTouchesBegan/Moved in my own little CCSprite subclass. However, from what I understand, you can't just add gesture recognizers to CCSprites. ccTouchMoved are also not available on CCSprites?? Really confused as to how to implement touches on Cocos2D. What is the easiest way to add some position translation code to a CCSprite so it can be dragged around? Thanks!

  Read the article

• ubuntu freezes right after loading

  - by toast

  new install of ubuntu 12.04 i386 desktop.iso on a toshiba satellite intel celeron m gets to the desktop screen and freezes the mouse still moves but nothing responds to it started terminal by pressing ctl+alt+f1 tried "startx" and got this(i cant copy and paste but i will do my best to avoid typos): fatal server error: server is already active for display 0 if this server is no longer running, remove /tmp/.X0-lock and start again please consult the x.org foundation support for help ddxSgiveup: closing log XIO: fatal IO error 11 (resource temporarily unavailable) on x server ":0" after 7 requests (7 known processed) with 0 events remaining. xxxxxx@aaaaaa-Satellite-a105:~$ tried "startx --:1" just took me back to the default wallpaper with nothing else mouse still moves but nothing else

  Read the article

• PC won't boot up after installing 11.10

  - by bakhshu

  I have a HP/Compaq s1010z (AMD64) desktop and installed 11.10 from a CD (using the entire disk). So it formatted the entire drive, went through installation and then it ejected the CD and asked me to click the Restart button, which I did. It rebooted fine the first time, but any time thereafter, it fails. Meaning, after the initial BIOS screen, the monitor seems to be stuck in limbo with a text cursor blinking on the top left corner, as if it can't find anything to boot from. At first I tried reinstalling (reformat entire drive again) - no improvement. Then I did an in-place re-installation (leave home dirs in place, just redo the OS), nothing there either. Then I put in the 11.04 CD, changed the boot order to CD first, and got the CD menu, chose 'Boot from first hard disk' and it booted fine. The problem is that I can't boot without the 11.04 CD, how ironic! Any ideas?

  Read the article

• How can I tell what error grub has when I can't read what it's saying?

  - by RolandiXor - The Ice Man

  Grub won't allow me to get into any systems on my HP dv7 (it runs 12.10). As the screen is broken, I can't read what the error is. Nothing works, not even the recovery mode. It gives me some error about "cannot find" (I think) and Press any (I guess key?) When a press a key I'm dropped back to the menu. At the moment I'm trying all the recovery options I know. However, it would be great if someone could tell me how to know what error grub is facing from a live cd or something (maybe a log file or something could help)? NB: I can view the filesystem from a liveCD, and I did check the filesystem - it was clean.

  Read the article

• Asus Machine fails to start due to missing msvcr.dll - what?

  - by Malcolm Anderson

  So first off a thanks to the internet, knoppix and a post over at http://www.overclock.net/windows/879553-msvcr80-dll-missing-catastrophic-failure.html   My Symptoms: my laptop would not boot.  Would not let me get anywhere.  Just like the symptoms in the post.   Thankfully, all I had to do was go rename my avg directory and all was good.  But I needed something to boot from and I knew and trusted Knoppix from my past linux experimental days.    If it wasn't for Knoppix, I would have probably reformatted my machine and I didn't want that.

  Read the article

• W520 External monitor setup with Ubuntu 12.10

  - by user108372

  I just installed a fresh Ubuntu 12.10 64-Bit Desktop on my Lenovo W520. It looks like there are a lot of challenges around making it work with out of the box Nouveau drivers or propriety Nvidia drivers or Intel GPU. I looked at couple of notes on how to make it work with Bumblebee with Optimus Nvidia. None of them seems to work for 12.10. Anybody has a solid answer on this? It seems like a lot of people are suffering from this. Here is my xrandr output. Let me know if you need any additional information. Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 LVDS1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.0*+ 59.9 50.0 1680x1050 60.0 59.9 1600x1024 60.2 1400x1050 60.0 1280x1024 60.0 1440x900 59.9 1280x960 60.0 1360x768 59.8 60.0 1152x864 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) Thanks, Sef

  Read the article

• Programming in R help

  - by mary

  I needed help in converting the temperature from Farenheit to Celsius. Below are several attempts and each of these fails. I have ran the following below and need help in saying what error message is created by: a) (temp -32) Can you please let me know the error message in a comment, and what it means and how to directly relate the wording of the error message with the problem you find in the expression. likewise for: b) (temp - 32)5/9 don't know the erorr on this one c) 5/9(temp - 32) need an asterisk, but not specific enough d) [temp - 32]5/9 I know braces is off.

  Read the article

• The system is running in low graphics mode error before ubuntu gets installed

  - by hellodear

  I am using Bootable USB for installing Ubuntu with Windows 8.1. I have put pendrive and then booting my USB. When it shows me to try Ubuntu or install Ubuntu. Then I press Try ubuntu and then it says" "The system is running in low graphics mode". Then I press Ok. Then it shows 4 options. Then again I click Ok. Then it shows a black screen and nothing happens. I have tried all possible answers provided in AU. What should I do? Please help. I am using Windows 8.1 with dedicated graphic card (Video card - AMD Radeon HD 8670M). Installing 12.04 LTS with pre-installe Windows 8.1 in a Dell Laptop 3537 inspiron.

  Read the article

• Java graphic objects as in flashgames

  - by Ryu Kajiya

  How is it possible (with the standard Java2D engine) to use small sprites like graphic objects? For those who don't know what I mean, in all those Flash-games like on Facebook they put small sprites on the screen which react to mouse-over and clicks. I tried to do the same in Java but can't find a good method. Swing components always spread over the whole bitmap, but I only want to get a reaction from the object when the mouse is over a pixel that's not transparent. So basically checking every time if the object below the mouse contains a non-transparent pixel (which i believe could be pretty intense in a gameloop or repaint loop). I have no idea how to implement such a thing efficiently.

  Read the article

• AgroSense in Java Magazine November/December 2012

  - by Geertjan

  AgroSense, the Duke's Choice Award winning open source farm management system from the Netherlands, is featured in the hot-off-the-presses latest edition of the always awesome Java Magazine (November/December 2012): Read the whole article after subscribing for free to the magazine, via clicking the image above or by clicking this link. Note: If you're reading this and your sofware organization is doing anything at all that relates to farm management, consider porting your software to an AgroSense plugin. That would save you an immense amount of time and your users will get a comprehensive farm management system out of the box. Don't reinvent the wheel: create your farm management software on top of the AgroSense Platform!

  Read the article

• wubi install of ubuntu 12.10 on hp dv6 6154tx causes uncontrolled heating, fan speed, low battery life

  - by kansi

  i have a hp dv6 6154tx with an integrated Intel GPU and a discrete ATI GPU (Radeon Mobility HD 6490M (1 GB DDR5)). -Problems: when i install ubuntu 12.10 using wubi, my laptop starts heating, fans start to run fast (to much of noise), and battery goes really low Any attempt to install catalyst drivers (from ati official site and also proprietary drivers) fails , as after reboot when i login everything is gone like no unity no desktop and sometimes black screen appears. even bumblebee and jupiter didnt help.... :( So PLEASE, PLEASE can somebody post the real solution to my problems i.e.(inc battery life and stop fan noise and heating). (i want to install ubuntu only using wubi)

  Read the article

• 6 Alternatives to iGoogle For Personalized Homepages

  - by Chris Hoffman

  iGoogle has less than a year to go before it’s shut down for good on November 1, 2013. While Google seems to think that iGoogle isn’t necessary anymore, there are other services waiting to take its place. Google says that “with modern apps that run on platforms like Chrome and Android, the need for iGoogle has eroded over time.” If you disagree, try one of the services below. How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

  Read the article

• Low-level 10-finger multi-touch data on the Nexus 7?

  - by Croad Langshan

  I'm considering getting a Nexus 7 to do some multi-touch development on Ubuntu in the run-up to 13.04 (i.e., now :-). What APIs, /dev files, or protocols are available, or could be made available with not too much work on my part? What data is available from the device? The data I want to get my hands on is -- if I can -- the same as I get from /dev/uinput/event* from an Apple Magic Trackpad, viz: positions of all touches (could be as many as 10 simultaneous touches, but much more typically 6 or fewer) their size/pressure (in both x and y directions) their angle their identity -- i.e. an integer that is somewhat reliably preserved across touch events, for as long as a finger doesn't lift off the surface Not all of this data is essential -- but the more of it there is, the merrier.

  Read the article

• How to automount usb drive reliably without fstab

  - by user103279

  Hi I need a way to mount a usb drive without using fstab. I Cannot use fstab because the drive is not connected to my computer at boot. This causes an issue during any one off reboots because start up hang waiting for this device until a keyboard intervention to skip it. I cannot use my current script with just does mount /dev/sde1 /media/Backup because sometimes it changes to sdf. Consider this a server install. I can't use tools at the user or GUI level. I suppose the sum of my question is how to manually mount a usb drive from the commandline considering the reliability of the /dev/sd value isn't consistent. Thanks,

  Read the article

• How to get Unity interface on my PC?

  - by Prarobo

  I downgraded by PC to 11.04 from 12.04 2 days ago. I was using the Unity interface and I am quite used to it. Today when I started my PC, I got a message (after the login screen showed) saying that my system does not support Unity and it automatically defaulted me to the classic interface. Now when I start my PC, even when the interface choice selected is Ubuntu and not Ubuntu Classic, it falls back to the classic interface. Any advice on how to get Unity back?

  Read the article

• Upgrading Ubuntu to 12.04 stuck

  - by Chris Britt

  While upgrading from 11.10 to 12.04, I'm stalled at the step: Installing new version of config file /etc/init/udevtrigger.conf The Terminal in the Distribution Upgrade window is expanded, there is no prompt for user input. I've hit enter a few times but it doesn't change anything but add a blank line after the last print statement. It's been sitting for ~6 hours at this stage. No other windows or dialog boxes are open. The upgrade has progressed through "Preparing to Upgrade", "Setting new software channels", and "Getting new packages". Under the progress bar (which estimates 1 day 2 hours remaining, and has for some time), it says Preparing to configure libpcap0.8. I'd take a screen-shot, but it won't let me save the file anywhere. The progress bar is about 1/3 complete.

  Read the article

• Cannot access my own web page

  - by enflam3

  I am developing, learning and experimenting with php,html,javascript,flash and so on. Having web hosting and all of the cpanel, phpmyadmin and other utilities. One day, while updating information, connection between my computer and website just went down. I found out that it is only from this computer, where I cannot access anything. I don't know what is the reason I cannot access website, however this is what I have checked so far: Everything else opens normally, having problem only with my page. Cannot access FTP,cpanel or any kind of information related to the domain and hosting ipconfigs detects IP, but shows request timed out (so its not browser related) Turned off Firewall,AV, Rebooted computer Cleared caches,temp,cookies,histry with CCleaner Checked connectivity with both (wired,wireless) networks ISP has dynamic IP that has been changed about 3 times since issue Checked host file I am out of ideas and understanding what could cause this kind of issue, however couple minutes ago, found out that everything works with proxy server (when adding IP and port to the browsers) Can someone point out what should I check or try to get rid of this problem?

  Read the article

• Ubuntu 12.04 x64 doesn't boot anymore after a power failure

  - by Felix

  I'm a Windows user and I have no experience with Linux and Ubuntu. I installed Ubuntu 12.04 on my netbook (Asus 1215B) and everything works fine. Yesterday I ran the "update application" and updated over 120 "things" (I have no idea what exactly). After that I was asked to reboot, and I did. Ubuntu starts again and at the load screen with these 5 dots that normally begin to change color, it freezes. After 20 minutes I took out the battery to try another reboot (yes, not the the best idea), and now nothing happens. I boot from the HDD and I get an Error BOOTMGR is missing. I have important data on the hard drive. Is there an option to get this fixed? Or if not, to at least get the data from the hard drive?

  Read the article

< Previous Page | 534 535 536 537 538 539 540 541 542 543 544 545  | Next Page >