Search Results

Search found 23220 results on 929 pages for 'default constraint'.

Page 539/929 | < Previous Page | 535 536 537 538 539 540 541 542 543 544 545 546  | Next Page >

• No Internet access while being connected to VPN using Cisco VPN Client 5.

  - by szeldon

  Hi, I have an access to corporate VPN using Cisco VPN Client 5.0.00:0340, but when I'm connected to it, I don't have an Internet access. I'm using Windows XP SP3. As it was suggested here http://forums.speedguide.net/showthread.php?t=209167 , I tried to enable "Allow local LAN Access" but it doesn't work. I also tried a second solution - deleting entry using "route" command, but it didn't help. I used "route delete 192.168.100.222". It's a third day of my attempts to solve this issue and I don't have an idea what else to do. I'm not very experienced in VPN stuff, but I know something about networking. Basing on my knowledge, I think that it's theoretically possible to achieve Internet access using my local network and only corporate stuff to be routed using VPN connection. I think that theoretically this should look like this: every IP being inside by corporation - VPN interface IP every other IP - my ethernet interface I've tried many possibilities of how to change those routes, but neither of them work. I'd really appreciate any help. My route configuration before connecting to VPN: =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 c0 a8 de 79 01 ...... Atheros AR5006EG Wireless Network Adapter - Teefer2 Miniport 0x10005 ...02 00 4c 4f 4f 50 ...... Microsoft Loopback Card 0x160003 ...00 17 42 31 0e 16 ...... Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller - Teefer2 Miniport =========================================================================== =========================================================================== Active routes: Network Destination Netmask Gateway Interface Metrics 0.0.0.0 0.0.0.0 192.168.101.254 192.168.100.222 10 10.0.0.0 255.255.255.0 10.0.0.10 10.0.0.10 30 10.0.0.10 255.255.255.255 127.0.0.1 127.0.0.1 30 10.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 30 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.100.0 255.255.254.0 192.168.100.222 192.168.100.222 1 192.168.100.222 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.100.255 255.255.255.255 192.168.100.222 192.168.100.222 1 224.0.0.0 240.0.0.0 10.0.0.10 10.0.0.10 3 224.0.0.0 240.0.0.0 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 1 255.255.255.255 255.255.255.255 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 192.168.100.222 2 1 Default gateway: 192.168.101.254. =========================================================================== My route configuration after connection to VPN: =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 c0 a8 de 79 01 ...... Atheros AR5006EG Wireless Network Adapter - Teefer2 Miniport 0x10005 ...02 00 4c 4f 4f 50 ...... Microsoft Loopback Card 0x160003 ...00 17 42 31 0e 16 ...... Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller - Teefer2 Miniport 0x170006 ...00 05 9a 3c 78 00 ...... Cisco Systems VPN Adapter - Teefer2 Miniport =========================================================================== =========================================================================== Active routes: Network Destination Netmask Gateway Interface Metrics 0.0.0.0 0.0.0.0 10.251.6.1 10.251.6.51 1 10.0.0.0 255.255.255.0 10.0.0.10 10.0.0.10 30 10.0.0.0 255.255.255.0 10.251.6.1 10.251.6.51 10 10.0.0.10 255.255.255.255 127.0.0.1 127.0.0.1 30 10.1.150.10 255.255.255.255 192.168.101.254 192.168.100.222 1 10.251.6.0 255.255.255.0 10.251.6.51 10.251.6.51 20 10.251.6.51 255.255.255.255 127.0.0.1 127.0.0.1 20 10.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 30 10.255.255.255 255.255.255.255 10.251.6.51 10.251.6.51 20 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.100.0 255.255.254.0 192.168.100.222 192.168.100.222 10 192.168.100.0 255.255.254.0 10.251.6.1 10.251.6.51 10 192.168.100.222 255.255.255.255 127.0.0.1 127.0.0.1 10 192.168.100.255 255.255.255.255 192.168.100.222 192.168.100.222 10 213.158.197.124 255.255.255.255 192.168.101.254 192.168.100.222 1 224.0.0.0 240.0.0.0 10.0.0.10 10.0.0.10 30 224.0.0.0 240.0.0.0 10.251.6.51 10.251.6.51 20 224.0.0.0 240.0.0.0 192.168.100.222 192.168.100.222 10 255.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 1 255.255.255.255 255.255.255.255 10.251.6.51 10.251.6.51 1 255.255.255.255 255.255.255.255 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 192.168.100.222 2 1 Default gateway: 10.251.6.1. ===========================================================================

  Read the article

• Adult Swim Brings Their Programming Lineup to iOS Devices

  - by ETC

  If you’re a fan of the programming lineup on Adult Swim–such as Family Guy, Aqua Teen Hunger Force, and The Boondocks–you can now get the entire lineup for free on your iOS device. Adult Swim’s new iOS app streams Adult Swim’s programming lineup including popular shows such as Robot Chicken, Aqua Teen Hunger Force, Family Guy, The Boondocks, Metalocalypse. Hit up the link below to read more and grab a free copy. Adult Swim [iTunes App Store via Download Squad] Latest Features How-To Geek ETC What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Make Efficient Use of Tab Bar Space by Customizing Tab Width in Firefox See the Geeky Work Done Behind the Scenes to Add Sounds to Movies [Video] Use a Crayon to Enhance Engraved Lettering on Electronics Adult Swim Brings Their Programming Lineup to iOS Devices Feel the Chill of the South Atlantic with the Antarctica Theme for Windows 7 Seas0nPass Now Offers Untethered Apple TV Jailbreaking

  Read the article

• How to get the basic mail command in ubuntu 10 to work

  - by Maureen Adamson

  I am a college lecturer to whom the task of supporting the students' Linux Server has fallen. My students just need to use the mail command to communicate with me and each other. I thought mail would be there by default but it wasn't. I have tried all the advice I found on the Internet and tried to install mailutils, sendmail, mailx, exim4 and postfix. There were more but I can't remember them all now. After installing (if it works - some of them don't), when I try to send a message they all give me: /usr/sbin/sendmail: file or directory not found. I don't need anything fancy - we don't need to access remote email, just locally on our server. Incidentally the same problems are occurring on the physical server and my test virtual machine, installed at different times but both Ubuntu 10. Can anyone help me?

  Read the article

• Barring connections if VPN is down.

  - by Majid

  I have a VPN account and use it for sensitive communication. However the VPN connection sometimes is dropped while my main connection to the internet is still alive. The pages I visit through VPN are on HTTP (not secure) and have javascript code which pings the host every minute or so on a timer. So it happens sometimes that the VPN connection is dropped and yet js sends a request to the server (with the cookies). How could I restrict connections so they only happen if the VPN is live? Edit - Some required details were missing OS: Windows XP SP2 Browser (mostly used): Google Chrome Firewall: Windows default Sites to filter: not all traffic but all in a list of sites like abc.com, xyz.com

  Read the article

• .htaccess does not ask the password

  - by Sarp Kaya

  I am using Ubuntu 12.04 and trying to use .htaccess on a page with apache2 server on it. My .htaccess file looks like this: AuthType Basic AuthName "Password Required" AuthBasicProvider file AuthUserFile /home/janeb/.htpasswd require valid-user /home/janeb/.htpasswd file is: inb351:$apr1$Ya4tzYvr$KCs3eyK1O2/c7Q9zRcwn.. and /etc/apache2/sites-available/default file is : UserDir public_html <Directory ~ "public_html/.*"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> I restarted apache. I have tried to change require valid-user to require user inb351. Still no luck. I also tried AllowOverride with AuthConfig and AuthConfig Indexes. So I don't know what else to do, and yes every step that I have tried I restarted apache.

  Read the article

• Upgrading from php 5.3 to php 5.4 with Macport

  - by dr.stonyhills

  PHP5.4 has been available for sometime now and Macport recently caught up with the release of port php54 but the process of upgrading is not as clear as possible. Even worst for those who are new to maintaining multiple versions of PHP on the same machine. I am keen on trying out some of the new features in PHP5.4 like traits, new array form etc but falling back on to php5.3 for other compatibility stuff. So i sudo port install php5+ (all the variants, apache2 etc) Then i tell it what PHP port to use as default sudo port select --set php php54 Check what version of PHP is active in the terminal using php -v outputs php 5.4.3. But i seem to be having issues with choosing the right non cli version as in the version of the module run by apache etc is still php5.3.12. Do i have to change the reference to the libphp5 in apache httpd.conf? Any advice on the right workflow for switching between php version on macport greatly appreciated!

  Read the article

• JDK8 New Build Infrastructure

  - by kto

  I unintentionally posted this before I verified everything, so once I have verified it all works, I'll updated this post. But this is what should work... Most Interesting Builder in the World: "I don't always build the jdk, but when I do, I prefer The New JDK8 Build Infrastructure. Stay built, my friends." So the new Build Infrastructure changes have been integrated into the jdk8/build forest along side the older Makefiles (newer in makefiles/ and older ones in make/). The default is still the older makefiles. Instructions can be found in the Build-Infra Project User Guide. The Build-Infra project's goal is to create the fastest build possible and correct many of the build issues we have been carrying around for years. I cannot take credit for much of this work, and wish to recognize the people who do so much work on this (and will probably still do more), see the New Build Infrastructure Changeset for a list of these talented and hard working JDK engineers. A big "THANK YOU" from me. Of course, every OS and system is different, and the focus has been on Linux X64 to start, Ubuntu 11.10 X64 in particular. So there are at least a base set of system packages you need. On Ubuntu 11.10 X64, you should run the following after getting into a root permissions situation (e.g. have run "sudo bash"): apt-get install aptitude aptitude update aptitude install mercurial openjdk-7-jdk rpm ssh expect tcsh csh ksh gawk g++ build-essential lesstif2-dev Then get the jdk8/build sources: hg clone http://hg.openjdk.java.net/jdk8/build jdk8-build cd jdk8-build sh ./get_source.sh Then do your build: cd common/makefiles bash ../autoconf/configure make We still have lots to do, but this is a tremendous start. -kto

  Read the article

• Postfix configuration: different outgoing hosts based on sender

  - by Joe

  I've seen a few answers to this on the web, but nothing definitive nor any good examples. I relay all my mail out through Postfix, currently everything sent to my ISP's mail server. However, there are a few users with gmail accounts or gmail-hosted accounts; I'd like to route their outgoing mail through Google's servers (since it will then appear in their Gmail sent folder). All email NOT from one of these senders should go out through the default relayhost. I believe I need to use the "sender_dependent_default_transport_maps" configuration within Postfix, but can't find a good example on what this setup looks like. Can anyone point me at a specific setup?

  Read the article

• Windows bios fails to boot up, keeps resetting

  - by Dwayne Diamond

  When I turn the computer on this error always happens wher jus after it starts up this screen pops up wher it says F1 to enter BIOS setup or F2 to start Windows Normally and if I press F2 it goes into Windows but freezez then I hav 2 turn the pc off, Problem is the BIOS + Date and Time keeps resetting itself somehow and it's not the battery because I put a new one in so when I manage 2 load default settings and get it working after some struggle and I shut down the pc the next day I switch the pc on and does the whole process again... What could this problem be and how can I fix it??? Thank you

  Read the article

• xmodmap modifications aren't enough - anything else I can do?

  - by Codemonkey

  I'm using an Apple keyboard which has some annoyances compared to other keyboards. Namely, the Alt_L and Super_L keys are swapped, and the bar and less keys are swapped ("|" and "<"). I've written an Xmodmap file to swap the keys back: keycode 49 = less greater less greater onehalf threequarters keycode 64 = Super_L NoSymbol Super_L keycode 94 = bar section bar section brokenbar paragraph keycode 108 = Super_R NoSymbol Super_R keycode 133 = Alt_L Meta_L Alt_L Meta_L keycode 134 = Alt_R Meta_R Alt_R Meta_R I did this by identifying the keys using xev and the default modmap xmodmap -pke and swapping the keycodes. xev now identifies all my keys as correct, which is awesome! I can also use the correct keys to type the bar and less than symbols. (I followed this answer on askubuntu: How do I remap certain keys?) But it seems the change isn't very deep. For instance, the Super key is now broken in the Compiz Settings Manager. No shortcuts involving the Super key works (but the Alt key does). Also the settings dialog for Gnome Do doesn't heed the changes in xmodmap, and I can't open the Gnome Do window anymore if I use any of the remapped keys. So to summarize, everything broke. I would like a deeper way of telling Ubuntu (or any other Linux distro for that matter) which keys are which on the keyboard. Is there a way to edit the Keyboard Layout directly? I'm using the Norwegian Bokmål keyboard layout. Does it reside in a file somewhere I could edit? Any comments, previous experiences or relevant stray thoughts would be greatly appreciated - Thanks

  Read the article

• ipconfig /release not working, why?

  - by barlop

  ipconfig /release is not working, why is that? here is a sequence where I put my cable in get an IP, try ipconfig /release and it tells me it can't release wireless, but there is no wireless connection. i'm just trying to release the wired one. C:\>ipconfig Windows IP Configuration Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Fine so I plug my cable in C:\>ipconfig Windows IP Configuration Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 0.0.0.0 Subnet Mask . . . . . . . . . . . : 0.0.0.0 Default Gateway . . . . . . . . . : C:\>ipconfig Windows IP Configuration Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.1.8 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.254 Fine so from above, it clearly has an iP C:\>ipconfig /release Windows IP Configuration No operation can be performed on Wireless Network Connection while it has its me dia disconnected. C:\>

  Read the article

• Windows XP - Repairing Corrupt System32\Config\System File

  - by SimonTewsi

  My apologies for this long post. I would like to describe the mess I'm in then ask some questions about how to fix it: Starting up my Windows XP SP1 machine I got the following message: Windows could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM Tried restarting several times with same results then Googled the problem. Tried the fix described here: http://icrontic.com/articles/repair%5Fwindows%5Fxp (since my CPU does not have XD buffer overflow protection I did not set /NOEXECUTE=OPTIN as OS Load Option). This did not work. I then found another fix for the problem on hardwareanalysis.com: Basically, boot to dos prompt (or recovery console if available) and make backups of the following files:- c:\windows\system32\config\system (to c:\windows\tmp\system.bak) c:\windows\system32\config\software (to c:\windows\tmp\software.bak) c:\windows\system32\config\sam (to c:\windows\tmp\sam.bak) c:\windows\system32\config\security (to c:\windows\tmp\security.bak) c:\windows\system32\config\default (to c:\windows\tmp\default.bak) then delete the above files (not the backups!) then copy the above files in c:\windows\repair to the c:\windows\system32\config directory restart your computer This did work (and I wish I'd done it first, since it was completely reversible, unlike the first method). However, afterwards I found that all the user accounts on the PC were gone. I resurrected them by copying the backed up security file back into the system32\config folder (I may have copied the SAM file from backup as well, I cannot remember clearly now). Now the PC boots up and I can log in. However things are still not right. I tried to alter one of the user accounts and found I could not access the User Accounts in the Control Panel. Microsoft KB 919292 had a fix for the problem. However, the fix failed with a Windows Installer error: The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if Windows Installer is not correctly installed. Contact your support personnel for assistance. Windows Installer 3.1 was already installed. I reinstalled it but continued to get the Windows Installer error whenever I tried to run the fix in KB 919292. I have since noticed another three problems: 1) Several applications on the PC no longer run, eg Microsoft Word. Shortcuts no longer seem to do anything and if I run the executables directly (eg for Word by running C:\Program Files\Microsoft Office\Office10\Winword.exe) I get a message similar to: "Microsoft Word has not been installed for the current user. Please run setup to install the application." even though the executable is clearly visible in Windows Explorer (and even though Word actually opens - the error dialog appears after Word has opened. Clicking OK to the error dialog closes Word). 2) One or the other of the two fixes I tried for the original problem caused new user profiles to be created. eg My old user profile under the Documents and Settings folder was Simon. The old one still exists but there is now a new one called Simon.DBQ2515. Obviously the new one is being used because Opera (my browser that still works) no longer sees the bookmarks file under my old profile. 3) Probably as a result of fooling around with the Security file, when I try to boot off the Windows XP CD and run the Recovery Console I am now asked for the administrator password. The only problem is there is no administrator account on the PC. There is one account, LocalAdmin, that has administrative rights but when I entered the password for that account it did not work. It is so long since I originally set up the PC that I cannot remember if the original administrator account ever had a password and, if so, what it was. So, my question is: How can I fix this mess? In particular: 1) Having tried the two fixes linked to above, have I irrepairably damaged the Windows instance, requiring a clean reinstallation of Windows + all applications, or should it be possible to get the machine working correctly again without such drastic measures? 2) Is there any way to get around the administrator password so I can use the Recovery Console again, given that there is no account called "administrator" and the password for the one account with admin privileges does not work (and that, before I started the second fix, I was not asked for an administrator password)? 3) Is there any easy way to fix the problem with the applications that think they are not installed? 4) Is there any easy way to fix the problem of the Windows Installer that does not work, even if reinstalled? Cheers Simon

  Read the article

• Ubuntu: Alternative task-switcher to what is provided in compiz

  - by user22106

  I'm running Ubuntu 11.04 and really enjoying it. The task switcher default in Ubuntu shows a list of small icons for each running app much like the windows task switcher. It's fast and effective. I enabled Compiz and noticed that the task switcher changed to one with small thumbnails showing a smaller version of each window. Nice, but it slows the task manager down to about 0.5 seconds to display, which for me is far too long. Have googled the forums and it's a very common problem with ubuntu/compiz. I want to run compiz as it provides so many other features, but the slow task switcher is just not going to run with me. So was wondering if there is some way of NOT letting compiz override the task switcher, or, if there is some other task switcher that I can install which will not be slow like the compiz one. Any help would be appreciated.

  Read the article

• cygwin rsync over ssh very slow

  - by Waleed Hamra

  I have 2 machines running Windows Xp SP3. I have cygwin installed on both, version 1.7. I have rsync and ssh installed on both, and configured using default settings as per ssh-host-config and ssh-user-config programs provided. I moved the public keys into their respective locations, and basically ssh is working fine. i began an rsync operation, using: rsync -av --delete --hard-links local_dir username@other_machine:/some_dir well... on both machines, the processor is running near idle, no heavy usage. I checked IO using process explorer on both machines, and that too is at normal levels (1~2 MB/s), so I can't see where the bottlenecks are, because network performance is aweful. I'm not going over 1MB/s... when a normal file copy using windows sharing achieves some ~10 MB/s.. What could be wrong?

  Read the article

• Incorrect "from" account used when accepting Outlook meeting requests

  - by Greg

  I am using Outlook 2013 and I have multiple accounts configured: AccountA (IMAP) - default account AccountB (Exchange) (There are others but I don't think it's directly relevant) I have been receiving Outlook meeting requests via AccountB and duly accepting them. All of my meetings, whether recorded manually or via meeting requests are saved in the calendar for AccountA (this works fine). I have discovered today that even though meeting requests are arriving via AccountB, the accept/decline messages that Outlook generates on my behalf (when I click the accept/decline button) are addressed from AccountA. I don't believe that I have any control over the address used to reply. This seems non-intuitive at best. I understand that the underlying calendar is in AccountA, but in every other scenario the "From" address in a reply to a message defaults to the account it was sent to. Can I change this behaviour so that it works as I expect?

  Read the article

• Control which os is booted on multi-boot system

  - by mooware

  I am setting up a server with multiple operating systems for the automatic testruns of my company's product. I'd like to be able to control with a script which OS boots up after a restart, so I could say for example "after the windows run, boot into linux". I thought of using the windows bootloader for all OSes, because it should be easy to just change the default entry in C:\boot.ini to whichever system I want to boot. Is this a feasible way of doing this? Are there better options?

  Read the article

• Apache does not serve non-locally

  - by yodaj007

  I have a freshly installed instance of Fedora Core 16 inside VirtualBox using bridged networking. On it, as root I typed in: yum -y install httpd service httpd start ifconfig Inside the VM, I can open a web browser to 'localhost' and I get the Apache test page. It works. But in Windows (the machine hosting the VM), I point my browser to the IP address returned by ifconfig (192.168.2.122). The connection times out. I can go to a command prompt and ping the VM. Is there a firewall or something that comes with Fedora by default? Or is there something I need to change in a config file?

  Read the article

• Is anyone familiar with this message in Kapersky Internet Security 2010?

  - by tintincutes

  Hi I just started my computer up & opened a website for my checking my mail, when I opened a Kaspersky Internet Security 2010 window popped up. C:\Documents and Settings\username\Local Settings\Application Data\Mozilla\Firefox\Profiles\rse47wp8.default\Cache\C\79\D5CC9d01 Does anyone is familiar with this? I checked the path and this path doesn't exist. I couldn't remember that I have a file of D5CC9d01 once. Can somebody please tell me if this is a virus or not? Thanks

  Read the article

• How can I properly create /dev/dvd?

  - by chazomaticus

  Certain programs look for /dev/dvd by default to find DVDs. When I first boot my computer without a DVD inserted, /dev/dvd exists and points to the correct place (/dev/sr0). However, when I insert a DVD, /dev/dvd disappears. I'd like it to stick around so I don't have to navigate to /dev/sr0 in programs that are looking for DVDs. How do I ensure that the /dev/dvd symlink exists and points to the right place? It looks like I can add something to /etc/udev/rules.d/70-persistent-cd.rules. This site gives a couple of examples, but the 70-persistent-cd.rules file says "add the ENV{GENERATED}=1 flag to your own rules", which isn't part of the examples. The man 7 udev page is impenetrable to me, and I'm not convinced the linked page gives 100% of the information I need. So, what can I do on a modern, Ubuntu 12.04 (or later) system to make /dev/dvd always exist and point to the right device? EDIT: Is it as simple as adding ENV{GENERATED}=1 to the rules in the linked page, something like this: SUBSYSTEM=="block", KERNEL=="sr0", SYMLINK+="dvd", GROUP="cdrom", ENV{GENERATED}=1 Is that the right information for modern Ubuntu? What is ENV{GENERATED} doing there, when it wasn't generated, but hand-written?

  Read the article

• show/hide specific scripts from browsers (adblock)

  - by user143822

  i'm using AdBlock Plus and Element Hiding Helper to show/hide dom element. But i don't understand how can i show/hide a specific javascript script from page. For example look this page: http://downloadzoneforum.net We have different div, class: maintitle. Every div maintitle have a spoiler. If click on - minus picture i can close the container. Default div maintitle have spoilers opened. But i want hide some spoilers using a filter. When i open Firefox, i want see hidden this spoilers from Extra Forum and Discussioni Varie Like this: How Can i Do this using Adblock or Element Hiding Helper or Another Solution?

  Read the article

• How can I copy and paste formatted text in Excel?

  - by Landy

  Before I ask question, I've searched but only found ways of copy and paste "formatted cell". That's not what I need. I want to use an example to explain my requirement: There are 2 cells in a sheet. Cell_A's text is "aaaaabbbbb", and "aaaaa" is green, and "bbbbb" is red. Cell_B's text is "ccccc" and "ccccc" is black. I want to copy and paste "bbbbb" from Cell_A to Cell_B and keep "bbbbb" in red. But in my environment(Office 2007), "bbbbb" is changed to black as "ccccc", the default format of Cell_B. Is there an easy way to implement my requirement?

  Read the article

• Weblogic Threads Usage

  - by Hila

  I have an application deployed on WebLogic 10.3, which exhibits a strange behavior. I am running a constant (not too high) load on my application (20 concurrent users, running a light activity). The response time is reasonable (well below 100ms after the application stabilizes) Memory consumption seems fine (My application creates a lot of short-living objects, but they are garbaged collected so the overall memory consumption stays under 500 mb). Threads stats seem healthy as well: And yet, after I leave my test running for a while, more and more execute threads ("[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'") are created, until eventually the application crashes: This test hasn't been running for a long time (All the new threads that you don't see in the first screenshot were created while I was writing this question), and I've seen much more threads being created. Any idea why these threads are being created?

  Read the article

• Wrong resolution for Lightdm/GDM on Ubuntu 13.04 using HDMI

  - by f03lipe

  I've tried all the solution I could find on the matter so far, but the error persists. My problem is that the login screen (both under gdm and lightdm) runs with the wrong resolution, even though all is fine when I log in. The error occurs solely when I have my HDMI cable connected to my other screen. The login screen resolution becomes 1024x768 (for my 1366x768 laptop screen) and mirrored on my screen, which is 1920x1080. I've had this issue on version 12.04 (the last one before I upgraded to 13.04), but I got it fixed by adding the xrandr commands on the begining of the /etc/gdm/Init/Default file. This doesn't seem to work anymore. I've also tried telling lightdm to run a script fixing the resolution with xrandr (by editing /etc/lightdm/lightdm.conf), but lightdm crashes, and I'm forced to log in with low graphic settigs. Hint: when ubuntu is loading, the resolution starts OK, then goes bad right before the login screen is initialized. Does that mean that there's nothing wrong with my graphic cards? What do you think? Cheers!

  Read the article

• why this routing configuration does not work?

  - by avs099

  I have 2 VMs in HyperV role: first is RRAS - it has 2 interfaces (both manually configured, no DHCP): 192.168.1.110 - "external" one, connected to the router 192.168.10.2 - that's internal interface which other VMs will be using as well also I added VPN connection to our main server - and it gets 192.168.2.136 IP address in 192.168.2.XXX network. And IP route is create on the server as well for this interface. second VM is called KITCHENER. It only has 1 interface 192.168.10.99 / 255.255.255.0, with default gateway set to RRAS server - 192.168.10.2 QUESTION: how can I ping "main server" - 192.168.2.1 - from the KITCHENER server when RRAS server is connected to VPN? please see screenshots with ipconfig /all, route print and ping 192.168.2.1 commands. What needs to be done to get this working? all servers are Windows 2008 R2 if that matters.

  Read the article

• Nginx enable site command

  - by Ghassen Telmoudi

  We all know how to enable a website using apache on linux. I'm pretty sure that we all agree on using the a2ensite command. Unfortunately there is no default equivalent command comes with Nginx, but it did happens that I installed some package on ubuntu that allowed me to enable/disable sites and list them. The problem is I don't remember the name of this package. Anybody knows what I'm talking about? Please tell me name of this package and the command name.

  Read the article

< Previous Page | 535 536 537 538 539 540 541 542 543 544 545 546  | Next Page >