identity management - Page 539

Database Owner Conundrum

- by Johnm

Have you ever restored a database from a production environment on Server A into a development environment on Server B and had some items, such as Service Broker, mysteriously cease functioning? You might want to consider reviewing the database owner property of the database. The Scenario Recently, I was developing some messaging functionality that utilized the Service Broker feature of SQL Server in a development environment. Within the instance of the development environment resided two databases: One was a restored version of a production database that we will call "RestoreDB". The second database was a brand new database that has yet to exist in the production environment that we will call "DevDB". The goal is to setup a communication path between RestoreDB and DevDB that will later be implemented into the production database. After implementing all of the Service Broker objects that are required to communicate within a database as well as between two databases on the same instance I found myself a bit confounded. My testing was showing that the communication was successful when it was occurring internally within DevDB; but the communication between RestoreDB and DevDB did not appear to be working. Profiler to the rescue After carefully reviewing my code for any misspellings, missing commas or any other minor items that might be a syntactical cause of failure, I decided to launch Profiler to aid in the troubleshooting. After simulating the cross database messaging, I noticed the following error appearing in Profiler: An exception occurred while enqueueing a message in the target queue. Error: 33009, State: 2. The database owner SID recorded in the master database differs from the database owner SID recorded in database '[Database Name Here]'. You should correct this situation by resetting the owner of database '[Database Name Here]' using the ALTER AUTHORIZATION statement. Now, this error message is a helpful one. Not only does it identify the issue in plain language, it also provides a potential solution. An execution of the following query that utilizes the catalog view sys.transmission_queue revealed the same error message for each communication attempt: SELECT * FROM sys.transmission_queue; Seeing the situation as a learning opportunity I dove a bit deeper. Reviewing the database properties The owner of a specific database can be easily viewed by right-clicking the database in SQL Server Management Studio and selecting the "properties" option. The owner is listed on the "General" page of the properties screen. In my scenario, the database in the production server was created by Frank the DBA; therefore his server login appeared as the owner: "ServerName\Frank". While this is interesting information, it certainly doesn't tell me much in regard to the SID (security identifier) and its existence, or lack thereof, in the master database as the error suggested. I pulled together the following query to gather more interesting information: SELECT a.name , a.owner_sid , b.sid , b.name , b.type_desc FROM master.sys.databases a LEFT OUTER JOIN master.sys.server_principals b ON a.owner_sid = b.sid WHERE a.name not in ('master','tempdb','model','msdb'); This query also helped identify how many other user databases in the instance were experiencing the same issue. In this scenario, I saw that there were no matching SIDs in server_principals to the owner SID for my database. What login should be used as the database owner instead of Frank's? The system stored procedure sp_helplogins will provide a list of the valid logins that can be used. Here is an example of its use, revealing all available logins: EXEC sp_helplogins; Fixing a hole The error message stated that the recommended solution was to execute the ALTER AUTHORIZATION statement. The full statement for this scenario would appear as follows: ALTER AUTHORIZATION ON DATABASE:: [Database Name Here] TO [Login Name]; Another option is to execute the following statement using the sp_changedbowner system stored procedure; but please keep in mind that this stored procedure has been deprecated and will likely disappear in future versions of SQL Server: EXEC dbo.sp_changedbowner @loginname = [Login Name]; .And They Lived Happily Ever After Upon changing the database owner to an existing login and simulating the inner and cross database messaging the errors have ceased. More importantly, all messages sent through this feature now successfully complete their journey. I have added the ownership change to my restoration script for the development environment.

Read the article

GameplayScreen does not contain a definition for GraphicsDevice

- by Dave Voyles

Long story short: I'm trying to intergrate my game with Microsoft's Game State Management. In doing so I've run into some errors, and the latest one is in the title. I'm not able to display my HUD for the reasons listed above. Previously, I had much of my code in my Game.cs class, but the GSM has a bit of it in Game1, and most of what you have drawn for the main screen in your GameplayScreen class, and that is what is causing confusion on my part. I've created an instance of the GameplayScreen class to be used in the HUD class (as you can see below). Before integrating with the GSM however, I created an instance of my Game class, and all worked fine. It seems that I need to define my graphics device somewhere, but I am not sure of where exactly. I've left some code below to help you understand. public class GameStateManagementGame : Microsoft.Xna.Framework.Game { #region Fields GraphicsDeviceManager graphics; ScreenManager screenManager; // Creates a new intance, which is used in the HUD class public static Game Instance; // By preloading any assets used by UI rendering, we avoid framerate glitches // when they suddenly need to be loaded in the middle of a menu transition. static readonly string[] preloadAssets = { "gradient", }; #endregion #region Initialization /// <summary> /// The main game constructor. /// </summary> public GameStateManagementGame() { Content.RootDirectory = "Content"; graphics = new GraphicsDeviceManager(this); graphics.PreferredBackBufferWidth = 1280; graphics.PreferredBackBufferHeight = 720; graphics.IsFullScreen = false; graphics.ApplyChanges(); // Create the screen manager component. screenManager = new ScreenManager(this); Components.Add(screenManager); // Activate the first screens. screenManager.AddScreen(new BackgroundScreen(), null); //screenManager.AddScreen(new MainMenuScreen(), null); screenManager.AddScreen(new PressStartScreen(), null); } namespace Pong { public class HUD { public void Update(GameTime gameTime) { // Used in the Draw method titleSafeRectangle = new Rectangle (GameplayScreen.Instance.GraphicsDevice.Viewport.TitleSafeArea.X, GameplayScreen.Instance.GraphicsDevice.Viewport.TitleSafeArea.Y, GameplayScreen.Instance.GraphicsDevice.Viewport.TitleSafeArea.Width, GameplayScreen.Instance.GraphicsDevice.Viewport.TitleSafeArea.Height); } } } class GameplayScreen : GameScreen { #region Fields ContentManager content; public static GameStates gamestate; private GraphicsDeviceManager graphics; public int screenWidth; public int screenHeight; private Texture2D backgroundTexture; private SpriteBatch spriteBatch; private Menu menu; private SpriteFont arial; private HUD hud; Animation player; // Creates a new intance, which is used in the HUD class public static GameplayScreen Instance; public GameplayScreen() { TransitionOnTime = TimeSpan.FromSeconds(1.5); TransitionOffTime = TimeSpan.FromSeconds(0.5); } protected void Initialize() { lastScored = false; menu = new Menu(); resetTimer = 0; resetTimerInUse = true; ball = new Ball(content, new Vector2(screenWidth, screenHeight)); SetUpMulti(); input = new Input(); hud = new HUD(); // Places the powerup animation inside of the surrounding box // Needs to be cleaned up, instead of using hard pixel values player = new Animation(content.Load<Texture2D>(@"gfx/powerupSpriteSheet"), new Vector2(103, 44), 64, 64, 4, 5); // Used by for the Powerups random = new Random(); vec = new Vector2(100, 50); vec2 = new Vector2(100, 100); promptVec = new Vector2(50, 25); timer = 10000.0f; // Starting value for the cooldown for the powerup timer timerVector = new Vector2(10, 10); //JEP - one time creation of powerup objects playerOnePowerup = new Powerup(); playerOnePowerup.Activated += PowerupActivated; playerOnePowerup.Deactivated += PowerupDeactivated; playerTwoPowerup = new Powerup(); playerTwoPowerup.Activated += PowerupActivated; playerTwoPowerup.Deactivated += PowerupDeactivated; //JEP - moved from events since these only need set once activatedVec = new Vector2(100, 125); deactivatedVec = new Vector2(100, 150); powerupReady = false; }

Read the article

Easy Made Easier

- by dragonfly

How easy is it to deploy a 2 node, fully redundant Oracle RAC cluster? Not very. Unless you use an Oracle Database Appliance. The focus of this member of Oracle's Engineered Systems family is to simplify the configuration, management and maintenance throughout the life of the system, while offering pay-as-you-grow scaling. Getting a 2-node RAC cluster up and running in under 2 hours has been made possible by the Oracle Database Appliance. Don't take my word for it, just check out these blog posts from partners and end users. The Oracle Database Appliance Experience - Zip Zoom Zoom http://www.fuadarshad.com/2012/02/oracle-database-appliance-experience.html Off-the-shelf Oracle database servers http://normanweaver.wordpress.com/2011/10/10/off-the-shelf-oracle-database-servers/ Oracle Database Appliance – Deployment Steps http://marcel.vandewaters.nl/oracle/database-appliance/oracle-database-appliance-deployment-steps See how easy it is to deploy an Oracle Database Appliance for high availability with RAC? Now for the meat of this post, which is the first in a series of posts describing tips for making the deployment of an ODA even easier. The key to the easy deployment of an Oracle Database Appliance is the Appliance Manager software, which does the actual software deployment and configuration, based on best practices. But in order for it to do that, it needs some basic information first, including system name, IP addresses, etc. That's where the Appliance Manager GUI comes in to play, taking a wizard approach to specifying the information needed. Using the Appliance Manager GUI is pretty straight forward, stepping through several screens of information to enter data in typical wizard style. Like most configuration tasks, it helps to gather the required information before hand. But before you rush out to a committee meeting on what to use for host names, and rely on whatever IP addresses might be hanging around, make sure you are familiar with some of the auto-fill defaults for the Appliance Manager. I'll step through the key screens below to highlight the results of the auto-fill capability of the Appliance Manager GUI. Depending on which of the 2 Configuration Types (Config Type screen) you choose, you will get a slightly different set of screens. The Typical configuration assumes certain default configuration choices and has the fewest screens, where as the Custom configuration gives you the most flexibility in what you configure from the start. In the examples below, I have used the Custom config type. One of the first items you are asked for is the System Name (System Info screen). This is used to identify the system, but also as the base for the default hostnames on following screens. In this screen shot, the System Name is "oda". When you get to the next screen (Generic Network screen), you enter your domain name, DNS IP address(es), and NTP IP address(es). Next up is the Public Network screen, seen below, where you will see the host name fields are automatically filled in with default host names based on the System Name, in this case "oda". The System Name is also the basis for default host names for the extra ethernet ports available for configuration as part of a Custom configuration, as seen in the 2nd screen shot below (Other Network). There is no requirement to use these host names, as you can easily edit any of the host names. This does make filling in the configuration details easier and less prone to "fat fingers" if you are OK with these host names. Here is a full list of the automatically filled in host names. 1 2 1-vip 2-vip -scan 1-ilom 2-ilom 1-net1 2-net1 1-net2 2-net2 1-net3 2-net3 Another auto-fill feature of the Appliance Manager GUI follows a common practice of deploying IP Addresses for a RAC cluster in sequential order. In the screen shot below, I entered the first IP address (Node1-IP), then hit Tab to move to the next field. As a result, the next 5 IP address fields were automatically filled in with the next 5 IP addresses sequentially from the first one I entered. As with the host names, these are not required, and can be changed to whatever your IP address values are. One note of caution though, if the first IP Address field (Node1-IP) is filled out and you click in that field and back out, the following 5 IP addresses will be set to the sequential default. If you don't use the sequential IP addresses, pay attention to where you click that mouse. :-) In the screen shot below, by entering the netmask value in the Netmask field, in this case 255.255.255.0, the gateway value was auto-filled into the Gateway field, based on the IP addresses and netmask previously entered. As always, you can change this value. My last 2 screen shots illustrate that the same sequential IP address autofill and netmask to gateway autofill works when entering the IP configuration details for the Integrated Lights Out Manager (ILOM) for both nodes. The time these auto-fill capabilities save in entering data is nice, but from my perspective not as important as the opportunity to avoid data entry errors. In my next post in this series, I will touch on the benefit of using the network validation capability of the Appliance Manager GUI prior to deploying an Oracle Database Appliance.

Read the article

JavaOne 2012 Sunday Strategy Keynote

- by Janice J. Heiss

At the Sunday Strategy Keynote, held at the Masonic Auditorium, Hasan Rizvi, EVP, Middleware and Java Development, stated that the theme for this year's JavaOne is: “Make the future Java”-- meaning that Java continues in its role as the most popular, complete, productive, secure, and innovative development platform. But it also means, he qualified, the process by which we make the future Java -- an open, transparent, collaborative, and community-driven evolution. "Many of you have bet your businesses and your careers on Java, and we have bet our business on Java," he said.Rizvi detailed the three factors they consider critical to the success of Java--technology innovation, community participation, and Oracle's leadership/stewardship. He offered a scorecard in these three realms over the past year--with OS X and Linux ARM support on Java SE, open sourcing of JavaFX by the end of the year, the release of Java Embedded Suite 7.0 middleware platform, and multiple releases on the Java EE side. The JCP process continues, with new JSR activity, and JUGs show a 25% increase in participation since last year. Oracle, meanwhile, continues its commitment to both technology and community development/outreach--with four regional JavaOne conferences last year in various part of the world, as well as the release of Java Magazine, with over 120,000 current subscribers. Georges Saab, VP Development, Java SE, next reviewed features of Java SE 7--the first major revision to the platform under Oracle's stewardship, which has included near-monthly update releases offering hundreds of fixes, performance enhancements, and new features. Saab indicated that developers, ISVs, and hosting providers have all been rapid adopters of the platform. He also noted that Oracle's entire Fusion middleware stack is supported on SE 7. The supported platforms for SE 7 has also increased--from Windows, Linux, and Solaris, to OS X, Linux ARM, and the emerging ARM micro-server market. "In the last year, we've added as many new platforms for Java, as were added in the previous decade," said Saab.Saab also explored the upcoming JDK 8 release--including Project Lambda, Project Nashorn (a modern implementation of JavaScript running on the JVM), and others. He noted that Nashorn functionality had already been used internally in NetBeans 7.3, and announced that they were planning to contribute the implementation to OpenJDK. Nandini Ramani, VP Development, Java Client, ME and Card, discussed the latest news pertaining to JavaFX 2.0--releases on Windows, OS X, and Linux, release of the FX Scene Builder tool, the JavaFX WebView component in NetBeans 7.3, and an OpenJFX project in OpenJDK. Nandini announced, as of Sunday, the availability for download of JavaFX on Linux ARM (developer preview), as well as Scene Builder on Linux. She noted that for next year's JDK 8 release, JavaFX will offer 3D, as well as third-party component integration. Avinder Brar, Senior Software Engineer, Navis, and Dierk König, Canoo Fellow, next took the stage and demonstrated all that JavaFX offers, with a feature-rich, animation-rich, real-time cargo management application that employs Canoo's just open-sourced Dolphin technology.Saab also explored Java SE 9 and beyond--Jigsaw modularity, Penrose Project for interoperability with OSGi, improved multi-tenancy for Java in the cloud, and Project Sumatra. Phil Rogers, HSA Foundation President and AMD Corporate Fellow, explored heterogeneous computing platforms that combine the CPU and the parallel processor of the GPU into a single piece of silicon and shared memory—a hardware technology driven by such advanced functionalities as HD video, face recognition, and cloud workloads. Project Sumatra is an OpenJDK project targeted at bringing Java to such heterogeneous platforms--with hardware and software experts working together to modify the JVM for these advanced applications and platforms.Ramani next discussed the latest with Java in the embedded space--"the Internet of things" and M2M--declaring this to be "the next IT revolution," with Java as the ideal technology for the ecosystem. Last week, Oracle released Java ME Embedded 3.2 (for micro-contollers and low-power devices), and Java Embedded Suite 7.0 (a middleware stack based on Java SE 7). Axel Hansmann, VP Strategy and Marketing, Cinterion, explored his company's use of Java in M2M, and their new release of EHS5, the world's smallest 3G-capable M2M module, running Java ME Embedded. Hansmaan explained that Java offers them the ability to create a "simple to use, scalable, coherent, end-to-end layer" for such diverse edge devices.Marc Brule, Chief Financial Office, Royal Canadian Mint, also explored the fascinating use-case of JavaCard in his country's MintChip e-cash technology--deployable on smartphones, USB device, computer, tablet, or cloud. In parting, Ramani encouraged developers to download the latest releases of Java Embedded, and try them out.Cameron Purdy, VP, Fusion Middleware Development and Java EE, summarized the latest developments and announcements in the Enterprise space--greater developer productivity in Java EE6 (with more on the way in EE 7), portability between platforms, vendors, and even cloud-to-cloud portability. The earliest version of the Java EE 7 SDK is now available for download--in GlassFish 4--with WebSocket support, better JSON support, and more. The final release is scheduled for April of 2013. Nicole Otto, Senior Director, Consumer Digital Technology, Nike, explored her company's Java technology driven enterprise ecosystem for all things sports, including the NikeFuel accelerometer wrist band. Looking beyond Java EE 7, Purdy mentioned NoSQL database functionality for EE 8, the concurrency utilities (possibly in EE 7), some of the Avatar projects in EE 7, some in EE 8, multi-tenancy for the cloud, supporting SaaS applications, and more.Rizvi ended by introducing Dr. Robert Ballard, oceanographer and National Geographic Explorer in Residence--part of Oracle's philanthropic relationship with the National Geographic Society to fund K-12 education around ocean science and conservation. Ballard is best known for having discovered the wreckage of the Titanic. He offered a fascinating video and overview of the cutting edge technology used in such deep-sea explorations, noting that in his early days, high-bandwidth exploration meant that you’d go down in a submarine and "stick your face up against the window." Now, it's a remotely operated, technology telepresence--"I think of my Hercules vehicle as my equivalent of a Na'vi. When I go beneath the sea, I actually send my spirit." Using high bandwidth satellite links, such amazing explorations can now occur via smartphone, laptop, or whatever platform. Ballard’s team regularly offers live feeds and programming out to schools and the world, spanning 188 countries--with embedding educators as part of the expeditions. It's technology at its finest, inspiring the next-generation of scientists and explorers!

Read the article

Siemens AG, Sector Healthcare, Increases Transparency and Improves Customer Loyalty with Web Portal Solution

- by Kellsey Ruppel

Siemens AG, Sector Healthcare, Increases Transparency and Improves Customer Loyalty with Web Portal Solution CUSTOMER AND PARTNER INFORMATION Customer Name – Siemens AG, Sector Healthcare Customer Revenue – 73,515 Billion Euro (2011, Siemens AG total) Customer Quote – “The realization of our complex requirements within a very short amount of time was enabled through the competent implementation partner Sapient, who fully used the very broad scope of standard functionality provided in the Oracle WebCenter Portal, and the management of customer services, who continuously supported the project setup. ” – Joerg Modlmayr, Project Manager, Healthcare Customer Service Portal, Siemens AG The Siemens Healthcare Sector is one of the world's largest suppliers to the healthcare industry and a trendsetter in medical imaging, laboratory diagnostics, medical information technology and hearing aids. Siemens offers its customers products and solutions for the entire range of patient care from a single source – from prevention and early detection to diagnosis, and on to treatment and aftercare. By optimizing clinical workflows for the most common diseases, Siemens also makes healthcare faster, better and more cost-effective. To ensure greater transparency, increased efficiency, higher user acceptance, and additional services, Siemens AG, Sector Healthcare, replaced several existing legacy portal solutions that could not meet the company’s future needs with Oracle WebCenter Portal. Various existing portal solutions that cannot meet future demands will be successively replaced by the new central service portal, which will also allow for the efficient and intuitive implementation of new service concepts. With Oracle, doctors and hospitals using Siemens medical solutions now have access to a central information portal that provides important information and services at just the push of a button. Customer Name – Siemens AG, Sector Healthcare Customer URL – www.siemens.com Customer Headquarters – Erlangen, Germany Industry – Industrial Manufacturing Employees – 360,000 Challenges – Replace disparate medical service portals to meet future demands and eliminate an unnecessarily high level of administrative work caused by heterogeneous installations Ensure portals meet current user demands to improve user-acceptance rates and increase number of total users Enable changes and expansion through standard functionality to eliminate the need for reliance on IT and reduce administrative efforts and associated high costs Ensure efficient and intuitive implementation of new service concepts for all devices and systems Ensure hospitals and clinics to transparently monitor and measure services rendered for the various medical devices and systems Increase electronic interaction and expand services to achieve a higher level of customer loyalty Solution – Deployed Oracle WebCenter Portal to ensure greater transparency, and as a result, a higher level of customer loyalty Provided a centralized platform for doctors and hospitals using Siemens’ medical technology solutions that provides important information and services at the push of a button Reduced significantly the administrative workload by centralizing the solution in the new customer service portal Secured positive feedback from customers involved in the pilot program developed by design experts from Oracle partner Sapient. The interfaces were created with customer needs in mind. The first survey taken shortly after implementation came back with 2.4 points on a scale of 0-3 in the category “customer service portal intuitiveness level” Met all requirements including alignment with the Siemens Style Guide without extensive programming Implemented additional services via the portal such as benchmarking options to ensure the optimal use of the Customer Device Park Provided option for documentation of all services rendered in conjunction with the medical technology systems to ensure that the value of the services are transparent for the decision makers in the hospitals Saved and stored all machine data from approximately 100,000 remote systems in the central service and information platform Provided the option to register errors online and follow the call status in real-time on the portal Made available at the push of a button all information on the medical technology devices used in hospitals or clinics—from security checks and maintenance activities to current device statuses Provided PDF format Service Performance Reports that summarize information from periods of time ranging from previous weeks up to one year, meeting medical product law requirements Why Oracle – Siemens AG favored Oracle for many reasons, however, the company ultimately decided to go with Oracle due to the enormous range of functionality the solutions offered for the healthcare sector.“We are not programmers; we are service providers in the medical technology segment and focus on the contents of the portal. All the functionality necessary for internet-based customer interaction is already standard in Oracle WebCenter Portal, which is a huge plus for us. Having Oracle as our technology partner ensures that the product will continually evolve, providing a strong technology platform for our customer service portal well into the future,” said Joerg Modlmayr project manager, Healthcare Customer Service Portal, Siemens AG. Partner Involvement – Siemens AG selected Oracle Partner Sapient because the company offered a service portfolio that perfectly met Siemens’ requirements and had a wealth of experience implementing Oracle WebCenter Portal. Additionally, Sapient had designers with a very high level of expertise in usability—an aspect that Siemens considered to be of vast importance for the project. “The Sapient team completely met all our expectations. Our tightly timed project was completed on schedule, and the positive feedback from our users proves that we set the right measures in terms of usability—all thanks to the folks at Sapient,” Modlmayr said. Partner Name – Sapient GmbH Deutschland Partner URL – www.sapient.com

Read the article

Repeated disconnects on WPA PEAP network

- by exasperated

My school has a WPA PEAP network with GTC inner authentication. I am able to connect to the network, but once I load a website or two, the network become unresponsive (i.e. in Chromium, it gets stuck at "Sending request"), and I'm eventually disconnected. Any help will be greatly appreciated. Here's some log output. I can provide more if needed: Ubuntu 13.04 3.8.0-32-generic x86_64 lsusb: 03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) lsmod: iwldvm 241872 0 mac80211 606457 1 iwldvm iwlwifi 173516 1 iwldvm cfg80211 511019 3 iwlwifi,mac80211,iwldvm dmesg: [ 3.501227] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X [ 3.503541] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 [ 3.527153] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 3.527162] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 3.527170] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 3.527178] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled [ 3.527186] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled [ 3.527192] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0 [ 3.527240] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 3.551049] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 375.153065] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 375.159727] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 375.553201] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 375.559871] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 1892.110738] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 1892.117357] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5227.235372] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 5227.242122] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5817.817954] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 5817.824560] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5824.571917] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 5824.571929] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 5824.571935] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 6956.290061] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 6956.296671] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 6963.080560] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 6963.080566] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 6963.080570] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 7613.469241] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 7613.475870] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 7620.201265] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 7620.201278] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 7620.201285] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 8232.762453] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 8232.769065] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 8239.581772] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 8239.581784] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 8239.581792] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [13763.634808] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [13763.641427] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [16955.598953] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [16955.605574] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 lshw: *-network description: Wireless interface product: Centrino Advanced-N 6235 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 24 serial: b4:b6:76:a0:4b:3c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.8.0-32-generic firmware=18.168.6.1 ip=10.250.169.96 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:46 memory:f7c00000-f7c01fff iwlist scan: Cell 02 - Address: 24:DE:C6:B0:C7:D9 Channel:36 Frequency:5.18 GHz (Channel 36) Quality=29/70 Signal level=-81 dBm Encryption key:on ESSID:"CatChat2x" Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=0000004ff3fe419b Extra: Last beacon: 27820ms ago IE: Unknown: 0009436174436861743278 IE: Unknown: 01088C129824B048606C IE: Unknown: 030124 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : 802.1x IE: Unknown: 2D1ACC011BFFFF000000000000000000000000000000000000000000 IE: Unknown: 3D1624001B000000FF000000000000000000000000000000 IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00 IE: Unknown: DD1E00904C33CC011BFFFF000000000000000000000000000000000000000000 IE: Unknown: DD1A00904C3424001B000000FF000000000000000000000000000000 Cell 04 - Address: 24:DE:C6:B0:C3:E9 Channel:149 Frequency:5.745 GHz Quality=28/70 Signal level=-82 dBm Encryption key:on ESSID:"CatChat2x" Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000181f60e19c Extra: Last beacon: 28680ms ago IE: Unknown: 0009436174436861743278 IE: Unknown: 01088C129824B048606C IE: Unknown: 030195 IE: Unknown: 050400010000 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : 802.1x IE: Unknown: 2D1ACC011BFFFF000000000000000000000000000000000000000000 IE: Unknown: 3D1695001B000000FF000000000000000000000000000000 IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00 IE: Unknown: DD1E00904C33CC011BFFFF000000000000000000000000000000000000000000 IE: Unknown: DD1A00904C3495001B000000FF000000000000000000000000000000 IE: Unknown: DD07000B8601040817 IE: Unknown: DD0E000B860103006170313930333032 Cell 09 - Address: 24:DE:C6:B0:C0:29 Channel:149 Frequency:5.745 GHz Quality=39/70 Signal level=-71 dBm Encryption key:on ESSID:"CatChat2x" Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=00000112fb688ede Extra: Last beacon: 27716ms ago ifconfig (while connected): wlan0 Link encap:Ethernet HWaddr b4:b6:76:a0:4b:3c inet addr:10.250.16.220 Bcast:10.250.31.255 Mask:255.255.240.0 inet6 addr: fe80::b6b6:76ff:fea0:4b3c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:230023 errors:0 dropped:0 overruns:0 frame:0 TX packets:130970 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:255999759 (255.9 MB) TX bytes:16652605 (16.6 MB) iwconfig (while connected): wlan0 IEEE 802.11abgn ESSID:"CatChat2x" Mode:Managed Frequency:5.745 GHz Access Point: 24:DE:C6:B0:C0:29 Bit Rate=6 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:3 Missed beacon:0

Read the article

Part 1 - Load Testing In The Cloud

- by Tarun Arora

Azure is fascinating, but even more fascinating is the marriage of Azure and TFS! Introduction Recently a client I worked for had 2 major business critical applications being delivered, with very little time budgeted for Performance testing, we immediately hit a bottleneck when the performance testing phase started, the in house infrastructure team could not support the hardware requirements in the short notice. It was suggested that the performance testing be performed on one of the QA environments which was a fraction of the production environment. This didn’t seem right, the team decided to turn to the cloud. The team took advantage of the elasticity offered by Azure, starting with a single test agent which was provisioned and ready for use with in 30 minutes the team scaled up to 17 test agents to perform a very comprehensive performance testing cycle. Issues were identified and resolved but the highlight was that the cost of running the ‘test rig’ proved to be less than if hosted on premise by the infrastructure team. Thank you for taking the time out to read this blog post, in the series of posts, I’ll try and cover the start to end of everything you need to know to use Azure to build your Test Rig in the cloud. But Why Azure? I have my own Data Centre… If the environment is provisioned in your own datacentre, - No matter what level of service agreement you may have with your infrastructure team there will be down time when the environment is patched - How fast can you scale up or down the environments (keeping the enterprise processes in mind) Administration, Cost, Flexibility and Scalability are the areas you would want to think around when taking the decision between your own Data Centre and Azure! How is Microsoft's Public Cloud Offering different from Amazon’s Public Cloud Offering? Microsoft's offering of the Cloud is a hybrid of Platform as a Service (PaaS) and Infrastructure as a Service (IaaS) which distinguishes Microsoft's offering from other providers such as Amazon (Amazon only offers IaaS). PaaS – Platform as a Service IaaS – Infrastructure as a Service Fills the needs of those who want to build and run custom applications as services. Similar to traditional hosting, where a business will use the hosted environment as a logical extension of the on-premises datacentre. A service provider offers a pre-configured, virtualized application server environment to which applications can be deployed by the development staff. Since the service providers manage the hardware (patching, upgrades and so forth), as well as application server uptime, the involvement of IT pros is minimized. On-demand scalability combined with hardware and application server management relieves developers from infrastructure concerns and allows them to focus on building applications. The servers (physical and virtual) are rented on an as-needed basis, and the IT professionals who manage the infrastructure have full control of the software configuration. This kind of flexibility increases the complexity of the IT environment, as customer IT professionals need to maintain the servers as though they are on-premises. The maintenance activities may include patching and upgrades of the OS and the application server, load balancing, failover clustering of database servers, backup and restoration, and any other activities that mitigate the risks of hardware and software failures. The biggest advantage with PaaS is that you do not have to worry about maintaining the environment, you can focus all your time in solving the business problems with your solution rather than worrying about maintaining the environment. If you decide to use a VM Role on Azure, you are asking for IaaS, more on this later. A nice blog post here on the difference between Saas, PaaS and IaaS. Now that we are convinced why we should be turning to the cloud and why in specific Azure, let’s discuss about the Test Rig. The Load Test Rig – Topology Now the moment of truth, Of course a big part of getting value from cloud computing is identifying the most adequate workloads to take to the cloud, so I’ve decided to try to make a Load Testing rig where the Agents are running on Windows Azure. I’ll talk you through the above Topology, - User: User kick starts the load test run from the developer workstation on premise. This passes the request to the Test Controller. - Test Controller: The Test Controller is on premise connected to the same domain as the developer workstation. As soon as the Test Controller receives the request it makes use of the Windows Azure Connect service to orchestrate the test responsibilities to all the Test Agents. The Windows Azure Connect endpoint software must be active on all Azure instances and on the Controller machine as well. This allows IP connectivity between them and, given that the firewall is properly configured, allows the Controller to send work loads to the agents. In parallel, the Controller will collect the performance data from the agents, using the traditional WMI mechanisms. - Test Agents: The Test Agents are on the Windows Azure Public Cloud, as soon as the test controller issues instructions to the test agents, the test agents start executing the load tests. The HTTP requests are issued against the web server on premise, the results are captured by the test agents. And finally the results are passed over to the controller. - Servers: The Web Server and DB Server are hosted on premise in the datacentre, this is usually the case with business critical applications, you probably want to manage them your self. Recap and What’s next? So, in the introduction in the series of blog posts on Load Testing in the cloud I highlighted why creating a test rig in the cloud is a good idea, what advantages does Windows Azure offer and the Test Rig topology that I will be using. I would also like to mention that i stumbled upon this [Video] on Azure in a nutshell, great watch if you are new to Windows Azure. In the next post I intend to start setting up the Load Test Environment and discuss pricing with respect to test agent machine types that will be used in the test rig. Hope you enjoyed this post, If you have any recommendations on things that I should consider or any questions or feedback, feel free to add to this blog post. Remember to subscribe to http://feeds.feedburner.com/TarunArora. See you in Part II. Share this post : CodeProject

Read the article

Training a 'replacement', how to enforce standards?

- by Mohgeroth

Not sure that this is the right stack exchange site to ask this of, but here goes... Scope I work for a small company that employs a few hundred people. The development team for the company is small and works out of visual foxpro. A specific department in the company hired me in as a 'lone gunman' to fix and enhance a pre-existing invoicing system. I've successfully taken an Access application that suffered from a lot of risks and limitations and converted it into a C# application driven off of a SQL server backend. I have recently obtained my undergraduate and am no expert by any means. To help make up for that I've felt that earning microsoft certifications will force me to understand more about .net and how it functions. So, after giving my notice with 9 months in advance, 3 months ago a replacement finally showed up. Their role is to learn what I have been designing to an attempt to support the applications designed in C#. The Replacement Fresh out of college with no real-world work experience, the first instinct for anything involving data was and still is listboxes... any time data is mentioned the list box is the control of choice for the replacement. This has gotten to the point, no matter how many times I discuss other controls, where I've seen 5 listboxes on a single form. Classroom experience was almost all C++ console development. So, an example of where I have concern is in a winforms application: Users need to key Reasons into a table to select from later. Given that I know that a strongly typed data set exists, I can just drag the data source from the toolbox and it would create all of this for me. I realize this is a simple example but using databinding is the key. For the past few months now we have been talking about the strongly typed dataset, how to use it and where it interacts with other controls. Data sets, how they work in relation to binding sources, adapters and data grid views. After handing this project off I expected questions about how to implement these since for me this is the way to do it. What happened next simply floors me: An instance of an adapter from the strongly typed dataset was created in the activate event of the form, a table was created and filled with data. Then, a loop was made to manually add rows to a listbox from this table. Finally, a variable was kept to do lookups to figure out what ID the record was for updates if required. How do they modify records you ask? That was my first question too. You won't believe how simple it is, all you do it double click and they type into a pop-up prompt the new value to change it to. As a data entry operator, all the modal popups would drive me absolutely insane. The final solution exceeds 100 lines of code that must be maintained. So my concern is that none of this is sinking in... the department is only allowed 20 hours a week of their time. Up until last week, we've only been given 4-5 hours a week if I'm lucky. The past week or so, I've been lucky to get 10. Question WHAT DO I DO?! I have 4 weeks left until I leave and they fully 'support' this application. I love this job and the opportunity it has given me but it's time for me to spread my wings and find something new. I am in no way, shape or form convinced that they are ready to take over. I do feel that the replacement has the technical ability to 'figure it out' but instead of learning they just write code to do all of this stuff manually. If the replacement wants to code differently in the end, as long as it works I'm fine with that as horrifiying at it looks. However to support what I have designed they MUST to understand how it works and how I have used controls and the framework to make 'magic' happen. This project has about 40 forms, a database with over 30 some odd tables, triggers and stored procedures. It relates labor to invoices to contracts to projections... it's not as simple as it was three years ago when I began this project and the department is now in a position where they cannot survive without it. How in the world can I accomplish any of the following?: Enforce standards or understanding in constent design when the department manager keeps telling them they can do it however they want to Find a way to engage the replacement in active learning of the framework and system design that support must be given for Gracefully inform sr. management that 5-9 hours a week is simply not enough time to learn about the department, pre-existing processes, applications that need to be supported AND determine where potential enhancements to the system go... Yes I know this is a wall of text, thanks for reading through me but I simply don't know what I should be doing. For me, this job is a monster of a reference and things would look extremely bad if I left and things fell apart. How do I handle this?

Read the article

Oracle Romania Summer School

- by Maria Sandu

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 What would you say about a Summer School within a corporation where you can learn, play and practice? You might think that this is something usually uncommon for a company and you would be right. However, Oracle’s main value being innovation, we came up with a new project for Romanian students and graduates. We organised Oracle Summer School , offering them the opportunity to develop their soft skills and gain valuable business knowledge and exposure. How was Oracle Summer School programme organised? We focused on students and graduates’ needs and combined business experience with training and practice. The twenty four participants had different backgrounds, being interested in Software, Hardware, Finance, Marketing or other areas. The programme fulfilled each of these needs, bringing them in contact with Specialists and Managers. The first two weeks were dedicated to the company visits, business presentations and networking. The participants got an insight about employees’ activities and projects. Storytelling was also part of the program and people from different departments spent a couple of hours with the participants, sharing their experiences, knowledge and interesting stories. The Recruitment team delivered a training about the job interview skills in order to make the participants feel better prepared for a Recruitment process. The second module consisted of two weeks of Soft Skills trainings delivered by professional trainers from different departments. The participants gained useful insight on the competencies required within a business environment. The evenings were dedicated to social activities and it not very long until they started feel part of a team. The third module will take place at the end of September and will put the participants in contact with senior people from the business who will become their Mentors. What do the participants say about Oracle Summer School? “ As a fresh computer science graduate, Oracle Summer School gave me the opportunity of finding what are the technical and nontechnical skills required in a large multinational company. It was a great way of seeing how the theoretical knowledge I received during college is applied in real-life scenarios and what skills I still need to develop. “ (Cosmin Radu) “ When arriving at Oracle I had high expectations, but did not know exactly what was going to unfold because of the program's lack of precedence. Right after the first day, my feedback outgrew the initial forecast and the following weeks continued to build upon it. I had the pleasure to acquaint with brilliant people. The program was outlined on various profiles, delivering a comprehensive experience. It was very engaging, informative and nevertheless fun. “ (Vlad Manciu) „ Oracle Summer School is by far the best summer school that I have ever attended. For me it has been a great experience so far, because I’ve learned not only how to use soft skills in a corporate environment, but I’ve learned a great deal about myself as well. However, the most valuable asset of this 3-week period were the people that I’ve met: great individuals and great professionals, whom I really grew fond of.” (Alexandru Purcarea) “Applying to Oracle Summer School has been the best decision I took in regard to how to spend my summer holiday. I had the chance to do job shadowing at some of the departments I was interested in and I attended great trainings on various subjects such as time management and emotional intelligence. Moreover, I made friends with the other participants and we enjoyed going out together after “classes”.(Andreea Tudor) If you are interested in joining our team and attending our events please follow us on https://campus.oracle.com/campus/HR/emea_main.html /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

Announcing Solaris Technical Track at NLUUG Spring Conference on Operating Systems

- by user9135656

The Netherlands Unix Users Group (NLUUG) is hosting a full-day technical Solaris track during its spring 2012 conference. The official announcement page, including registration information can be found at the conference page.This year, the NLUUG spring conference focuses on the base of every computing platform; the Operating System. Hot topics like Cloud Computing and Virtualization; the massive adoption of mobile devices that have their special needs in the OS they run but that at the same time put the challenge of massive scalability onto the internet; the upspring of multi-core and multi-threaded chips..., all these developments cause the Operating System to still be a very interesting area where all kinds of innovations have taken and are taking place.The conference will focus specifically on: Linux, BSD Unix, AIX, Windows and Solaris. The keynote speech will be delivered by John 'maddog' Hall, infamous promotor and supporter of UNIX-based Operating Systems. He will talk the audience through several decades of Operating Systems developments, and share many stories untold so far. To make the conference even more interesting, a variety of talks is offered in 5 parallel tracks, covering new developments in and also collaboration between Linux, the BSD's, AIX, Solaris and Windows. The full-day Solaris technical track covers all innovations that have been delivered in Oracle Solaris 11. Deeply technically-skilled presenters will talk on a variety of topics. Each topic will first be introduced at a basic level, enabling visitors to attend to the presentations individually. Attending to the full day will give the audience a comprehensive overview as well as more in-depth understanding of the most important new features in Solaris 11.NLUUG Spring Conference details:* Date and time: When : April 11 2012 Start: 09:15 (doors open: 8:30) End : 17:00, (drinks and snacks served afterwards)* Venue: Nieuwegein Business Center Blokhoeve 1 3438 LC Nieuwegein The Nederlands Tel : +31 (0)30 - 602 69 00 Fax : +31 (0)30 - 602 69 01 Email : [email protected] Route : description - (PDF, Dutch only)* Conference abstracts and speaker info can be found here.* Agenda for the Solaris track: Note: talks will be in English unless marked with 'NL'.1. Insights to Solaris 11 Joerg Moellenkamp - Solaris Technical Specialist Oracle Germany2. Lifecycle management with Oracle Solaris 11 Detlef Drewanz - Solaris Technical Specialist Oracle Germany3. Solaris 11 Networking - Crossbow Project Andrew Gabriel - Solaris Technical Specialist Oracle UK4. ZFS: Data Integrity and Security Darren Moffat - Senior Principal Engineer, Solaris Engineering Oracle UK5. Solaris 11 Zones and Immutable Zones (NL) Casper Dik - Senior Staff Engineer, Software Platforms Oracle NL6. Experiencing Solaris 11 (NL) Patrick Ale - UNIX Technical Specialist UPC Broadband, NLTalks are 45 minutes each.There will be a "Solaris Meeting point" during the conference where people can meet-up, chat with the speakers and with fellow Solaris enthousiasts, and where live demos or other hands-on experiences can be shared.The official announcement page, including registration information can be found at the conference page on the NLUUG website. This site also has a complete list of all abstracts for all talks.Please register on the NLUUG website.

Read the article

ROracle support for TimesTen In-Memory Database

- by Sam Drake

Today's guest post comes from Jason Feldhaus, a Consulting Member of Technical Staff in the TimesTen Database organization at Oracle. He shares with us a sample session using ROracle with the TimesTen In-Memory database. Beginning in version 1.1-4, ROracle includes support for the Oracle Times Ten In-Memory Database, version 11.2.2. TimesTen is a relational database providing very fast and high throughput through its memory-centric architecture. TimesTen is designed for low latency, high-volume data, and event and transaction management. A TimesTen database resides entirely in memory, so no disk I/O is required for transactions and query operations. TimesTen is used in applications requiring very fast and predictable response time, such as real-time financial services trading applications and large web applications. TimesTen can be used as the database of record or as a relational cache database to Oracle Database. ROracle provides an interface between R and the database, providing the rich functionality of the R statistical programming environment using the SQL query language. ROracle uses the OCI libraries to handle database connections, providing much better performance than standard ODBC.The latest ROracle enhancements include: Support for Oracle TimesTen In-Memory Database Support for Date-Time using R's POSIXct/POSIXlt data types RAW, BLOB and BFILE data type support Option to specify number of rows per fetch operation Option to prefetch LOB data Break support using Ctrl-C Statement caching support Times Ten 11.2.2 contains enhanced support for analytics workloads and complex queries: Analytic functions: AVG, SUM, COUNT, MAX, MIN, DENSE_RANK, RANK, ROW_NUMBER, FIRST_VALUE and LAST_VALUE Analytic clauses: OVER PARTITION BY and OVER ORDER BY Multidimensional grouping operators: Grouping clauses: GROUP BY CUBE, GROUP BY ROLLUP, GROUP BY GROUPING SETS Grouping functions: GROUP, GROUPING_ID, GROUP_ID WITH clause, which allows repeated references to a named subquery block Aggregate expressions over DISTINCT expressions General expressions that return a character string in the source or a pattern within the LIKE predicate Ability to order nulls first or last in a sort result (NULLS FIRST or NULLS LAST in the ORDER BY clause) Note: Some functionality is only available with Oracle Exalytics, refer to the TimesTen product licensing document for details. Connecting to TimesTen is easy with ROracle. Simply install and load the ROracle package and load the driver. > install.packages("ROracle") > library(ROracle) Loading required package: DBI > drv <- dbDriver("Oracle") Once the ROracle package is installed, create a database connection object and connect to a TimesTen direct driver DSN as the OS user. > conn <- dbConnect(drv, username ="", password="", dbname = "localhost/SampleDb_1122:timesten_direct") You have the option to report the server type - Oracle or TimesTen? > print (paste ("Server type =", dbGetInfo (conn)$serverType)) [1] "Server type = TimesTen IMDB" To create tables in the database using R data frame objects, use the function dbWriteTable. In the following example we write the built-in iris data frame to TimesTen. The iris data set is a small example data set containing 150 rows and 5 columns. We include it here not to highlight performance, but so users can easily run this example in their R session. > dbWriteTable (conn, "IRIS", iris, overwrite=TRUE, ora.number=FALSE) [1] TRUE Verify that the newly created IRIS table is available in the database. To list the available tables and table columns in the database, use dbListTables and dbListFields, respectively. > dbListTables (conn) [1] "IRIS" > dbListFields (conn, "IRIS") [1] "SEPAL.LENGTH" "SEPAL.WIDTH" "PETAL.LENGTH" "PETAL.WIDTH" "SPECIES" To retrieve a summary of the data from the database we need to save the results to a local object. The following call saves the results of the query as a local R object, iris.summary. The ROracle function dbGetQuery is used to execute an arbitrary SQL statement against the database. When connected to TimesTen, the SQL statement is processed completely within main memory for the fastest response time. > iris.summary <- dbGetQuery(conn, 'SELECT SPECIES, AVG ("SEPAL.LENGTH") AS AVG_SLENGTH, AVG ("SEPAL.WIDTH") AS AVG_SWIDTH, AVG ("PETAL.LENGTH") AS AVG_PLENGTH, AVG ("PETAL.WIDTH") AS AVG_PWIDTH FROM IRIS GROUP BY ROLLUP (SPECIES)') > iris.summary SPECIES AVG_SLENGTH AVG_SWIDTH AVG_PLENGTH AVG_PWIDTH 1 setosa 5.006000 3.428000 1.462 0.246000 2 versicolor 5.936000 2.770000 4.260 1.326000 3 virginica 6.588000 2.974000 5.552 2.026000 4 <NA> 5.843333 3.057333 3.758 1.199333 Finally, disconnect from the TimesTen Database. > dbCommit (conn) [1] TRUE > dbDisconnect (conn) [1] TRUE We encourage you download Oracle software for evaluation from the Oracle Technology Network. See these links for our software: Times Ten In-Memory Database, ROracle. As always, we welcome comments and questions on the TimesTen and Oracle R technical forums.

Read the article

CodePlex Daily Summary for Friday, October 19, 2012

CodePlex Daily Summary for Friday, October 19, 2012Popular ReleasesOrchard Project: Orchard 1.6 RC: RELEASE NOTES This is the Release Candidate version of Orchard 1.6. You should use this version to prepare your current developments to the upcoming final release, and report problems. Please read our release notes for Orchard 1.6 RC: http://docs.orchardproject.net/Documentation/Orchard-1-6-Release-Notes Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you wil...Rawr: Rawr 5.0.1: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...TFS 2012 Server/service Setup for Demo: TfsDemo_1.0.0.2: Release 1.0.0.2 New Stuff Feature 1 - Now add team favorite queries using the Tfs demo setup application. Simply specify the name of the work item query in the demoConfig.xml file and let the application work its magic. Feature 2 - Exclude the sections you do not want to be run as part of the demo. Mark the sections you don't want to run during the demo with the attribute Run="false" in the demoConfig.xml. Bug Fix 1 - If the DemoConfig.xml contains users or email addresses in work item a...XamlImageConverter: Xaml Image Converter 3.2: VisualStudio Integration Installer is now a VSIX Extension.Yahoo! UI Library: YUI Compressor for .Net: Version 2.1.1.0 - Sartha (BugFix): - Revered back the embedding of the 2x assemblies.Visual Studio Team Foundation Server Branching and Merging Guide: v2.1 - Visual Studio 2012: Welcome to the Branching and Merging Guide What is new? The Version Control specific discussions have been moved from the Branching and Merging Guide to the new Advanced Version Control Guide. The Branching and Merging Guide and the Advanced Version Control Guide have been ported to the new document style. See http://blogs.msdn.com/b/willy-peter_schaub/archive/2012/10/17/alm-rangers-raising-the-quality-bar-for-documentation-part-2.aspx for more information. Quality-Bar Details Documentatio...D3 Loot Tracker: 1.5.5: Compatible with 1.05.Write Once, Play Everywhere: MonoGame 3.0 (BETA): This is a beta release of the up coming MonoGame 3.0. It contains an Installer which will install a binary release of MonoGame on windows boxes with the following platforms. Windows, Linux, Android and Windows 8. If you need to build for iOS or Mac you will need to get the source code at this time as the installers for those platforms are not available yet. The installer will also install a bunch of Project templates for Visual Studio 2010 , 2012 and MonoDevleop. For those of you wish...WPUtils: WPUtils 1.3: Blend SDK for Silverlight provides a HyperlinkAction which is missing in Blend SDK for Windows Phone. This release adds such an action which makes use of WebBrowserTask to show web page. You can also bind the hyperlink to your view model. NOTE: Windows Phone SDK 7.1 or higher is required.Windawesome: Windawesome v1.4.1 x64: Fixed switching of applications across monitors Changed window flashing API (fix your config files) Added NetworkMonitorWidget (thanks to weiwen) Any issues/recommendations/requests for future versions? This is the 64-bit version of the release. Be sure to use that if you are on a 64-bit Windows. Works with "Required DLLs v3".CODE Framework: 4.0.21017.0: See change log in the Documentation section for details.Global Stock Exchange (Hobby Project): Global Stock Exchange - Invst Banking (Hobby Proj): Initial VersionMagelia WebStore Open-source Ecommerce software: Magelia WebStore 2.1: Add support for .net 4.0 to Magelia.Webstore.Client and StarterSite version 2.1.254.3 Scheduler Import & Export feature (for Professional and Entreprise Editions) UTC datetime and timezone support .net 4.5 and Visual Studio 2012 migration client magelia global refactoring release of a nugget package to help developers speed up development http://nuget.org/packages/Magelia.Webstore.Client optimization of the data update mechanism (a.k.a. "burst") Performance improvment of the d...JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2.2: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like OData, MongoDB, WebSQL, SqLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video Sencha Touch 2 example app using JayData: Netflix browser. What's new in JayData 1.2.2 For detailed release notes check the release notes. Revitalized IndexedDB providerNow you c...VFPX: FoxcodePlus: FoxcodePlus - Visual Studio like extensions to Visual FoxPro IntelliSense.Droid Explorer: Droid Explorer 0.8.8.8 Beta: fixed the icon for packages on the desktop fixed the install dialog closing right when it starts removed the link to "set up the sdk for me" as this is no longer supported. fixed bug where the device selection dialog would show, even if there was only one device connected. fixed toolbar from having "gap" between other toolbar removed main menu items that do not have any menus Fiskalizacija za developere: FiskalizacijaDev 1.0: Prva verzija ovog projekta, još je uvijek oznacena kao BETA - ovo znaci da su naša testiranja prošla uspješno :) No, kako mi ne proizvodimo neki software za blagajne, tako sve ovo nije niti isprobano u "realnim" uvjetima - svaka je sugestija, primjedba ili prijava bug-a je dobrodošla. Za sve ovo koristite, molimo, Discussions ili Issue Tracker. U ovom trenutku runtime binary je raspoloživ kao Any CPU za .NET verzije 2.0. Javite ukoliko trebaju i verzije buildane za 32-bit/64-bit kao i za .N...Squiggle - A free open source LAN Messenger: Squiggle 3.2 (Development): NOTE: This is development release and not recommended for production use. This release is mainly for enabling extensibility and interoperability with other platforms. Support for plugins Support for extensions Communication layer and protocol is platform independent (ZeroMQ, ProtocolBuffers) Bug fixes New /invite command Edit the sent message Disable update check NOTE: This is development release and not recommended for production use.NDatabase - C# Lightweight Object Database: NDatabase 2.0.1 Release: This release contains stable version of NDatabase C# Lightweight Object Database Content: binaries (dll + pdb) sources (sources, unit tests, samples) Changes: namespaces, dll name both are changed to NDatabase2 query API is changed. Now it is using generics in every possible place changing the way, how fields from class are stored - for now they are ordered by name which allows db on working well even if someone will change the order of fields in class definition (BREAKING CHANGE) A...AcDown????? - AcDown Downloader Framework: AcDown????? v4.2: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???，????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??2...New Projects7COM0207 DIY Wedding Cake: DIY Wedding Cake SiteAnt: AntCms.ArduUtilityLibrary for Arduino: ArduUtilityLibrary (AUL) is a library to assist the development of Arduino based programsbelloscoursework: Coursework to create a a web 2.0 website that support content creation.Code Jumper: Code-Jumper allows you to navigate your code by displaying a map of your declarations on the side panel of your editor. Dean's Web Scripting & Content Creation Project: Web Scripting & Content Creation Project for MSc Computer Science at Herts University.Distributed System for Medical Providers: This is a draft circulated for medical supplies providerDockPanel Suite VS2012 Look: Dock Panel Suite Control C# Visual Studio 2012 Design LookEntity Framework Json Serializer: Solve the Circular Reference problem when using Entity Framework with Asp.NET MVC JsonResult.ExpressGrid: A javascript gridFimClient: Our library - Predica.FimCommunication - for talking to FIM (Forefront Identity Manager) web servicesGetDev.NET - Mvc Talk: Sample code for local user group talk about ASP.NET MVCHelp Desk: Sistema para teste do mvc 3HospitalManagementSystem: Summary This system is for -handle channeling -handle lab reportsjQuery Filedrop: In this demo I will demonstrate using HTML5 compatible browsers to drag and drop files and save the content into a SQL2012 database. JS DNN Task Manager: This is a DNN tutorial to create a task manager projectKinect - Finger and gesture recognition: Find fingertips and pointing direction, record and recognize finger gestures. All this with the depth stream from the Kinect sensor.MarkusUtility: Utilities used in other projectsMASSIVE DATA TRANSFER OPTIMIZATIONS: This is project is used find an efficient way to transfer the massive data via TCP/IP. Minesweeper by S. Joshi: A user-created version of Minesweeper.NETFOX CATAN: very goodPrestazioni e affidabilità: Progetto di prestazioni ed affidabilità del corso di informatica, università Ca' Foscari di VeneziaProyecto Mammut: Este es un proyecto cuyo objetivo es georeferenciar la oferta commercial de la ciudad de Manta,Ecuador mediante puntos de referencias basados en T. Público.Razor Exercise 1: Just an exercise....Sannel Helpers: Varies extension methods I have created.Service Pipeline: A simple library for implementing a service pipeline with your existing service contracts.Set Last Access: Simple console client which can scans folder tree and set LastAccess time by times of newest item in folderSharePoint Web Part Replacement: A set of classes and sample feature receiver used to replace web parts on a SharePoint site collection (SPSite). Sitecore Image Placeholder: Sitecore Image Placeholder module helps Content Editors by displaying placeholders with correct image size when field of type Image is empty.SlidePuzzle: A slide puzzle.StackAttack: StackAttack is a .NET client for use with the Stack Exchange API v2.1.testASPsite: Nothing of interesttestdd18102012git01: dtestdd18102012tfs02: stestddgit10182012git03: tTransform Manager Task for creating assets in Windows Azure Media Services: Task for Transform Manager that creates assets in Windows Azure Media Services and requests a stream locator. Used to push assets into the cloud for streaming.Trie for C#: Implementing the Trie structer in C#/.Netwsccm11aah: My Project for Web Scripting and Content Creation module submitted to Steve Bennet and Mariana Lilleywuggi: Wuggi is a simple website that focuses on its users input to enrich its content. Discussions and feedback are always welcomed on Wuggi.YahtzeePC: A Yahtzee emulator for the PC.

Read the article

Educause Top-Ten IT Issues - the most change in a decade or more

- by user739873

The Education IT Issue Panel has released the 2012 top-ten issues facing higher education IT leadership, and instead of the customary reshuffling of the same deck, the issues reflect much of the tumult and dynamism facing higher education generally. I find it interesting (and encouraging) that at the top of this year's list is "Updating IT Professionals' Skills and Roles to Accommodate Emerging Technologies and Changing IT Management and Service Delivery Models." This reflects, in my view, the realization that higher education IT must change in order to fully realize the potential for transforming the institution, and therefore it's people must learn new skills, understand and accept new ways of solving problems, and not be tied down by past practices or institutional inertia. What follows in the remaining 9 top issues all speak, in some form or fashion, to the need for dramatic change, but not just in the areas of "funding IT" (code for cost containment or reduction), but rather the need to increase effectiveness and efficiency of the institution through the use of technology—leveraging the wave of BYOD (Bring Your Own Device) to the institution's advantage, rather than viewing it as a threat and a problem to be contained. Although it's #10 of 10, IT Governance (and establishment and implementation of the governance model throughout the institution) is key to effectively acting upon many of the preceding issues in this year's list. In the majority of cases, technology exists to meet the needs and requirements to effectively address many of the challenges outlined in top-ten issues list. Which brings me to my next point. Although I try not to sound too much like an Oracle commercial in these (all too infrequent) blog posts, I can't help but point out how much confluence there is between several of the top issues this year and what my colleagues and I have been evangelizing for some time. Starting from the bottom of the list up: 1) I'm gratified that research and the IT challenges it presents has made the cut. Big Data (or Large Data as it's phased in the report) is rapidly going to overwhelm much of what exists today even at our most prepared and well-equipped research universities. Combine large data with the significantly more stringent requirements around data preservation, archiving, sharing, curation, etc. coming from granting agencies like NSF, and you have the brewing storm that could result in a lot of "one-off" solutions to a problem that could very well be addressed collectively and "at scale." 2) Transformative effects of IT – while I see more and more examples of this, there is still much more that can be achieved. My experience tells me that culture (as the report indicates or at least poses the question) gets in the way more than technology not being up to task. We spend too much time on "context" and not "core," and get lost in the weeds on the journey to truly transforming the institution with technology. 3) Analytics as a key element in improving various institutional outcomes. In our work around Student Success, we see predictive "academic" analytics as essential to getting in front of the Student Success issue, regardless of how an institution or collections of institutions defines success. Analytics must be part of the fabric of the key academic enterprise applications, not a bolt-on. We will spend a significant amount of time on this topic during our semi-annual Education Industry Strategy Council meeting in Washington, D.C. later this month. 4) Cloud strategy for the broad range of applications in the academic enterprise. Some of the recent work by Casey Green at the Campus Computing Survey would seem to indicate that there is movement in this area but mostly in what has been termed "below the campus" application areas such as collaboration tools, recruiting, and alumni relations. It's time to get serious about sourcing elements of mature applications like student information systems, HR, Finance, etc. leveraging a model other than traditional on-campus custom. I've only selected a few areas of the list to highlight, but the unifying theme here (and this is where I run the risk of sounding like an Oracle commercial) is that these lofty goals cry out for partners that can bring economies of scale to bear on the problems married with a deep understanding of the nuances unique to higher education. In a recent piece in Educause Review on Student Information Systems, the author points out that "best of breed is back". Unfortunately I am compelled to point out that best of breed is a large part of the reason we have made as little progress as we have as an industry in advancing some of the causes outlined above. Don't confuse "integrated" and "full stack" for vendor lock-in. The best-of-breed market forces that Ron points to ensure that solutions have to be "integratable" or they don't survive in the marketplace. However, by leveraging the efficiencies afforded by adopting solutions that are pre-integrated (and possibly metered out as a service) allows us to shed unnecessary costs – as difficult as these decisions are to make and to drive throughout the organization. Cole

Read the article

Unexpected advantage of Engineered Systems

- by user12244672

It's not surprising that Engineered Systems accelerate the debugging and resolution of customer issues. But what has surprised me is just how much faster issue resolution is with Engineered Systems such as SPARC SuperCluster. These are powerful, complex, systems used by customers wanting extreme database performance, app performance, and cost saving server consolidation. A SPARC SuperCluster consists or 2 or 4 powerful T4-4 compute nodes, 3 or 6 extreme performance Exadata Storage Cells, a ZFS Storage Appliance 7320 for general purpose storage, and ultra fast Infiniband switches. Each with its own firmware. It runs Solaris 11, Solaris 10, 11gR2, LDoms virtualization, and Zones virtualization on the T4-4 compute nodes, a modified version of Solaris 11 in the ZFS Storage Appliance, a modified and highly tuned version of Oracle Linux running Exadata software on the Storage Cells, another Linux derivative in the Infiniband switches, etc. It has an Infiniband data network between the components, a 10Gb data network to the outside world, and a 1Gb management network. And customers can run whatever middleware and apps they want on it, clustered in whatever way they want. In one word, powerful. In another, complex. The system is highly Engineered. But it's designed to run general purpose applications. That is, the physical components, configuration, cabling, virtualization technologies, switches, firmware, Operating System versions, network protocols, tunables, etc. are all preset for optimum performance and robustness. That improves the customer experience as what the customer runs leverages our technical know-how and best practices and is what we've tested intensely within Oracle. It should also make debugging easier by fixing a large number of variables which would otherwise be in play if a customer or Systems Integrator had assembled such a complex system themselves from the constituent components. For example, there's myriad network protocols which could be used with Infiniband. Myriad ways the components could be interconnected, myriad tunable settings, etc. But what has really surprised me - and I've been working in this area for 15 years now - is just how much easier and faster Engineered Systems have made debugging and issue resolution. All those error opportunities for sub-optimal cabling, unusual network protocols, sub-optimal deployment of virtualization technologies, issues with 3rd party storage, issues with 3rd party multi-pathing products, etc., are simply taken out of the equation. All those error opportunities for making an issue unique to a particular set-up, the "why aren't we seeing this on any other system ?" type questions, the doubts, just go away when we or a customer discover an issue on an Engineered System. It enables a really honed response, getting to the root cause much, much faster than would otherwise be the case. Here's a couple of examples from the last month, one found in-house by my team, one found by a customer: Example 1: We found a node eviction issue running 11gR2 with Solaris 11 SRU 12 under extreme load on what we call our ExaLego test system (mimics an Exadata / SuperCluster 11gR2 Exadata Storage Cell set-up). We quickly established that an enhancement in SRU12 enabled an 11gR2 process to query Infiniband's Subnet Manager, replacing a fallback mechanism it had used previously. Under abnormally heavy load, the query could return results which were misinterpreted resulting in node eviction. In several daily joint debugging sessions between the Solaris, Infiniband, and 11gR2 teams, the issue was fully root caused, evaluated, and a fix agreed upon. That fix went back into all Solaris releases the following Monday. From initial issue discovery to the fix being put back into all Solaris releases was just 10 days. Example 2: A customer reported sporadic performance degradation. The reasons were unclear and the information sparse. The SPARC SuperCluster Engineered Systems support teams which comprises both SPARC/Solaris and Database/Exadata experts worked to root cause the issue. A number of contributing factors were discovered, including tunable parameters. An intense collaborative investigation between the engineering teams identified the root cause to a CPU bound networking thread which was being starved of CPU cycles under extreme load. Workarounds were identified. Modifications have been put back into 11gR2 to alleviate the issue and a development project already underway within Solaris has been sped up to provide the final resolution on the Solaris side. The fixed SPARC SuperCluster configuration greatly aided issue reproduction and dramatically sped up root cause analysis, allowing the correct workarounds and fixes to be identified, prioritized, and implemented. The customer is now extremely happy with performance and robustness. Since the configuration is common to other customers, the lessons learned are being proactively rolled out to other customers and incorporated into the installation procedures for future customers. This effectively acts as a turbo-boost to performance and reliability for all SPARC SuperCluster customers. If this had occurred in a "home grown" system of this complexity, I expect it would have taken at least 6 months to get to the bottom of the issue. But because it was an Engineered System, known, understood, and qualified by both the Solaris and Database teams, we were able to collaborate closely to identify cause and effect and expedite a solution for the customer. That is a key advantage of Engineered Systems which should not be underestimated. Indeed, the initial issue mitigation on the Database side followed by final fix on the Solaris side, highlights the high degree of collaboration and excellent teamwork between the Oracle engineering teams. It's a compelling advantage of the integrated Oracle Red Stack in general and Engineered Systems in particular.

Read the article

XNA shield effect with a Primative sphere problem

- by Sparky41

I'm having issue with a shield effect i'm trying to develop. I want to do a shield effect that surrounds part of a model like this: http://i.imgur.com/jPvrf.png I currently got this: http://i.imgur.com/Jdin7.png (The red likes are a simple texture a black background with a red cross in it, for testing purposes: http://i.imgur.com/ODtzk.png where the smaller cross in the middle shows the contact point) This sphere is drawn via a primitive (DrawIndexedPrimitives) This is how i calculate the pieces of the sphere using a class i've called Sphere (this class is based off the code here: http://xbox.create.msdn.com/en-US/education/catalog/sample/primitives_3d) public class Sphere { // During the process of constructing a primitive model, vertex // and index data is stored on the CPU in these managed lists. List vertices = new List(); List indices = new List(); // Once all the geometry has been specified, the InitializePrimitive // method copies the vertex and index data into these buffers, which // store it on the GPU ready for efficient rendering. VertexBuffer vertexBuffer; IndexBuffer indexBuffer; BasicEffect basicEffect; public Vector3 position = Vector3.Zero; public Matrix RotationMatrix = Matrix.Identity; public Texture2D texture; /// <summary> /// Constructs a new sphere primitive, /// with the specified size and tessellation level. /// </summary> public Sphere(float diameter, int tessellation, Texture2D text, float up, float down, float portstar, float frontback) { texture = text; if (tessellation < 3) throw new ArgumentOutOfRangeException("tessellation"); int verticalSegments = tessellation; int horizontalSegments = tessellation * 2; float radius = diameter / 2; // Start with a single vertex at the bottom of the sphere. AddVertex(Vector3.Down * ((radius / up) + 1), Vector3.Down, Vector2.Zero);//bottom position5 // Create rings of vertices at progressively higher latitudes. for (int i = 0; i < verticalSegments - 1; i++) { float latitude = ((i + 1) * MathHelper.Pi / verticalSegments) - MathHelper.PiOver2; float dy = (float)Math.Sin(latitude / up);//(up)5 float dxz = (float)Math.Cos(latitude); // Create a single ring of vertices at this latitude. for (int j = 0; j < horizontalSegments; j++) { float longitude = j * MathHelper.TwoPi / horizontalSegments; float dx = (float)(Math.Cos(longitude) * dxz) / portstar;//port and starboard (right)2 float dz = (float)(Math.Sin(longitude) * dxz) * frontback;//front and back1.4 Vector3 normal = new Vector3(dx, dy, dz); AddVertex(normal * radius, normal, new Vector2(j, i)); } } // Finish with a single vertex at the top of the sphere. AddVertex(Vector3.Up * ((radius / down) + 1), Vector3.Up, Vector2.One);//top position5 // Create a fan connecting the bottom vertex to the bottom latitude ring. for (int i = 0; i < horizontalSegments; i++) { AddIndex(0); AddIndex(1 + (i + 1) % horizontalSegments); AddIndex(1 + i); } // Fill the sphere body with triangles joining each pair of latitude rings. for (int i = 0; i < verticalSegments - 2; i++) { for (int j = 0; j < horizontalSegments; j++) { int nextI = i + 1; int nextJ = (j + 1) % horizontalSegments; AddIndex(1 + i * horizontalSegments + j); AddIndex(1 + i * horizontalSegments + nextJ); AddIndex(1 + nextI * horizontalSegments + j); AddIndex(1 + i * horizontalSegments + nextJ); AddIndex(1 + nextI * horizontalSegments + nextJ); AddIndex(1 + nextI * horizontalSegments + j); } } // Create a fan connecting the top vertex to the top latitude ring. for (int i = 0; i < horizontalSegments; i++) { AddIndex(CurrentVertex - 1); AddIndex(CurrentVertex - 2 - (i + 1) % horizontalSegments); AddIndex(CurrentVertex - 2 - i); } //InitializePrimitive(graphicsDevice); } /// <summary> /// Adds a new vertex to the primitive model. This should only be called /// during the initialization process, before InitializePrimitive. /// </summary> protected void AddVertex(Vector3 position, Vector3 normal, Vector2 texturecoordinate) { vertices.Add(new VertexPositionNormal(position, normal, texturecoordinate)); } /// <summary> /// Adds a new index to the primitive model. This should only be called /// during the initialization process, before InitializePrimitive. /// </summary> protected void AddIndex(int index) { if (index > ushort.MaxValue) throw new ArgumentOutOfRangeException("index"); indices.Add((ushort)index); } /// <summary> /// Queries the index of the current vertex. This starts at /// zero, and increments every time AddVertex is called. /// </summary> protected int CurrentVertex { get { return vertices.Count; } } public void InitializePrimitive(GraphicsDevice graphicsDevice) { // Create a vertex declaration, describing the format of our vertex data. // Create a vertex buffer, and copy our vertex data into it. vertexBuffer = new VertexBuffer(graphicsDevice, typeof(VertexPositionNormal), vertices.Count, BufferUsage.None); vertexBuffer.SetData(vertices.ToArray()); // Create an index buffer, and copy our index data into it. indexBuffer = new IndexBuffer(graphicsDevice, typeof(ushort), indices.Count, BufferUsage.None); indexBuffer.SetData(indices.ToArray()); // Create a BasicEffect, which will be used to render the primitive. basicEffect = new BasicEffect(graphicsDevice); //basicEffect.EnableDefaultLighting(); } /// <summary> /// Draws the primitive model, using the specified effect. Unlike the other /// Draw overload where you just specify the world/view/projection matrices /// and color, this method does not set any renderstates, so you must make /// sure all states are set to sensible values before you call it. /// </summary> public void Draw(Effect effect) { GraphicsDevice graphicsDevice = effect.GraphicsDevice; // Set our vertex declaration, vertex buffer, and index buffer. graphicsDevice.SetVertexBuffer(vertexBuffer); graphicsDevice.Indices = indexBuffer; graphicsDevice.BlendState = BlendState.Additive; foreach (EffectPass effectPass in effect.CurrentTechnique.Passes) { effectPass.Apply(); int primitiveCount = indices.Count / 3; graphicsDevice.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, vertices.Count, 0, primitiveCount); } graphicsDevice.BlendState = BlendState.Opaque; } /// <summary> /// Draws the primitive model, using a BasicEffect shader with default /// lighting. Unlike the other Draw overload where you specify a custom /// effect, this method sets important renderstates to sensible values /// for 3D model rendering, so you do not need to set these states before /// you call it. /// </summary> public void Draw(Camera camera, Color color) { // Set BasicEffect parameters. basicEffect.World = GetWorld(); basicEffect.View = camera.view; basicEffect.Projection = camera.projection; basicEffect.DiffuseColor = color.ToVector3(); basicEffect.TextureEnabled = true; basicEffect.Texture = texture; GraphicsDevice device = basicEffect.GraphicsDevice; device.DepthStencilState = DepthStencilState.Default; if (color.A < 255) { // Set renderstates for alpha blended rendering. device.BlendState = BlendState.AlphaBlend; } else { // Set renderstates for opaque rendering. device.BlendState = BlendState.Opaque; } // Draw the model, using BasicEffect. Draw(basicEffect); } public virtual Matrix GetWorld() { return /*world */ Matrix.CreateScale(1f) * RotationMatrix * Matrix.CreateTranslation(position); } } public struct VertexPositionNormal : IVertexType { public Vector3 Position; public Vector3 Normal; public Vector2 TextureCoordinate; /// <summary> /// Constructor. /// </summary> public VertexPositionNormal(Vector3 position, Vector3 normal, Vector2 textCoor) { Position = position; Normal = normal; TextureCoordinate = textCoor; } /// <summary> /// A VertexDeclaration object, which contains information about the vertex /// elements contained within this struct. /// </summary> public static readonly VertexDeclaration VertexDeclaration = new VertexDeclaration ( new VertexElement(0, VertexElementFormat.Vector3, VertexElementUsage.Position, 0), new VertexElement(12, VertexElementFormat.Vector3, VertexElementUsage.Normal, 0), new VertexElement(24, VertexElementFormat.Vector2, VertexElementUsage.TextureCoordinate, 0) ); VertexDeclaration IVertexType.VertexDeclaration { get { return VertexPositionNormal.VertexDeclaration; } } } A simple call to the class to initialise it. The Draw method is called in the master draw method in the Gamecomponent. My current thoughts on this are: The direction of the weapon hitting the ship is used to get the middle position for the texture Wrap a texture around the drawn sphere based on this point of contact Problem is i'm not sure how to do this. Can anyone help or if you have a better idea please tell me i'm open for opinion? :-) Thanks.

Read the article

XBRL - Moving from Production to Consumption

- by jmorourke

Here's an update on what’s new with XBRL and how it can actually benefit your organization versus adding extra time and costs to financial reporting. On February 29th (leap day) of 2012 I attended the XBRL and Financial Analysis Technology Conference at Baruch College in NYC. The event, which attracted over 300 XBRL gurus and fans was presented by XBRL US, The New York Society of Security Analysts’ Improved Corporate Reporting Committee, and Baruch College’s Robert Zicklin Center for Corporate Integrity. The event featured keynotes from the U.S. Securities and Exchange Commission (SEC), and the CFA Institute as well as panels covering alternative research tools and data, corporate reporting to stakeholders and a demonstration of XBRL analysis tools. The program culminated in a presentation of the finalists and the winner of the $20,000 XBRL Challenge. Some of the key points made in the sessions included: The focus of XBRL tools is moving from production to consumption. As of February 2012, over 9000 companies are reporting in XBRL, with over 10 million facts filed to date XBRL taxonomy extensions have dropped from 27% to 11% making comparisons easier The SEC reports that XBRL makes it easier to analyze disclosures, focus on accounting issues XBRL is helping standards-setters like the FASB speed their analysis of impacts of proposed accounting rule changes Companies like Thomson Reuters report that XBRL is helping speed the delivery of data to clients The most interesting part of the program though, was the session highlighting the 5 finalists in the XBRL Challenge competition and the winning solution. The XBRL Challenge was launched in 2011 as a means of spurring the development of more end-user tools to help with the consumption of XBRL-based financial information. Over an 8-month process handled by 5 judges, there were 84 registrants, 15 completed submissions, 5 finalists and one winner of the challenge. All of the solutions are open-sourced tools and most of them focus on consuming XBRL-based data. The 5 finalists included: Advanced XBRL Processing from Oxide solutions – XBRL viewer for taxonomies, filings and company data with peer comparison capabilities. Arrelle – API for XBRL processes, supports SEC Validations, RSS Feeds to access filings etc. Calcbench – XBRL data analysis tool that can be embedded in other web applications. This tool can combine XBRL filings with real-time market data. XBRL to XL – allows the importing of XBRL data into Microsoft Excel for analysis, comparisons. Users start on the web and populate Excel with XBRL data. XBurble – allows users to search and view XBRL filings, export to Excel, merge for comparison, and includes a workflow interface. The winner of the $20,000 XBRL Challenge prize was CalcBench. More information about the XBRL Challenge and the finalists can be found at www.XBRLUS.org/challenge XBRL for Sustainability Reporting – other recent news on the XBRL front was the announcement by the Global Reporting Initiative (GRI) of an XBRL taxonomy for Sustainability Reporting. This taxonomy was co-developed by the GRI and Deloitte and is designed to make the consumption of data found in Sustainability Reports much easier. Although there is no government mandate to file Sustainability Reports in XBRL format, organizations that do use the GRI guidelines for Sustainability Reporting are encouraged to tag and submit their data voluntarily to the GRI – who will populate a database with Sustainability Reporting data and make this available to the public. For more information about this initiative, you can go to the GRI web site: www.globalreporting.org. So how does all of this benefit corporate filers and investors? Since its introduction, the consensus in the market is that XBRL has mainly benefited the regulators and investment analysts who need to consume and analyze large volumes of financial data. But with the emergence of more end-user tools for consuming and analyzing XBRL-based data, and the ability to perform quick comparisons of one company versus its peers and competitors in an industry group, will soon accelerate the benefits to corporate finance staff, as well as individual investors. This could apply to financial results tagged in XBRL, as well as non-financial information such as Sustainability Reporting – which over the long-term will likely be integrated with financial reporting. And as multiple regulators and agencies in a country adopt the XBRL standard for corporate filings, more benefits will accrue as companies will be able to leverage one set of XBRL-based financial data for multiple regulatory filings. For more information about the latest developments in XBRL, check out the XBRL US or XBRL International web sites: www.xbrl.org, www.xbrlus.org. For more information about what Oracle is doing to support XBRL, here are some links: http://www.oracle.com/us/solutions/ent-performance-bi/disclosure-management-065892.html http://www.oracle.com/technetwork/database/features/xmldb/index-087631.html Feel free to contact me if you have any questions or need more information: [email protected]

Read the article

Intel Centrino Wireless-N 1000 Again ! Ubuntu 13.04 x64

- by vafa

First I have to say that I tried everything written about this concept. The problem is that it stops working randomly in 3 main forms : 1 - sometimes it disconnect from wireless network and reconnect automatically 2 - sometimes it disconnect and wont connect no matter what (needs reboot) 3 - some times it's still connected but cannot ping or surf or whatever. I already tried disabling N mod using these commands : sudo modprobe -r iwlwifi modprobe iwlwifi 11n_disable=1 (or 0, whatever) it didn't help . these are the results of lspci, sudo lshw -C network, ifconfig, iwconfig, rfkill list when it disconnected and didn't connect till reboot : ifconfig : eth0 Link encap:Ethernet HWaddr c8:0a:a9:34:65:77 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1563213476557380 errors:9379306629148050 dropped:3126435543049350 overruns:1563217771524675 frame:7816088857623375 TX packets:1563217771524675 errors:6252871086098700 dropped:0 overruns:1563217771524675 carrier:3126435543049350 collisions:7816088857623375 txqueuelen:1000 RX bytes:1563217771524675 (1.5 PB) TX bytes:1563217771524675 (1.5 PB) ham0 Link encap:Ethernet HWaddr 7a:79:19:a5:e4:93 inet addr:25.165.228.147 Bcast:25.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::7879:19ff:fea5:e493/64 Scope:Link inet6 addr: 2620:9b::19a5:e493/96 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1404 Metric:1 RX packets:7743 errors:0 dropped:0 overruns:0 frame:0 TX packets:1250 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:665642 (665.6 KB) TX bytes:204056 (204.0 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:41138 errors:0 dropped:0 overruns:0 frame:0 TX packets:41138 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6420962 (6.4 MB) TX bytes:6420962 (6.4 MB) wlan0 Link encap:Ethernet HWaddr 00:1e:64:45:fb:70 inet6 addr: fe80::21e:64ff:fe45:fb70/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:286999 errors:0 dropped:0 overruns:0 frame:0 TX packets:226966 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:324386887 (324.3 MB) TX bytes:30674804 (30.6 MB) iwconfig : ham0 no wireless extensions. eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off sudo lshw -C network: *-network description: Wireless interface product: Centrino Wireless-N 1000 [Condor Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:07:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:45:fb:70 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.8.0-30-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:46 memory:c0400000-c0401fff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: c0 serial: c8:0a:a9:34:65:77 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:47 memory:c0900000-c093ffff ioport:5000(size=128) *-network description: Ethernet interface physical id: 2 logical name: ham0 serial: 7a:79:19:a5:e4:93 size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full ip=25.165.228.147 link=yes multicast=yes port=twisted pair speed=10Mbit/s lspci: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: NVIDIA Corporation G98M [GeForce G 105M] (rev a1) 07:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak] 09:00.0 Ethernet controller: Qualcomm Atheros AR8131 Gigabit Ethernet (rev c0) rfkill list : 1: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 2: acer-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 9: phy0: Wireless LAN Soft blocked: no Hard blocked: no any help will be REALLLYYYY appreciated

Read the article

Why everybody should do Sales!

- by FelixWehmeyer

I speak with many business students and ask them what job they want to get into. Most of them tell me they want a job in Marketing, Management Consulting or Finance. I hardly ever hear “Sales, that is what I want to do”, and I often wonder why. I would like to start with a quote from Zig Ziglar, a successful salesman: "Nothing happens until someone sells something." But to get back to the main point, why wouldn’t you want to get in sales? When people think of sales, they picture a typical salesman in their head and think that selling is scary and all about manipulating, pressuring and pushing someone into buying something they don’t need. Are these stereotypes accurate? I don’t believe so: So why should you want to be in sales? If you think about selling as providing the solution for the problem and talking about the benefits of making a decision, then every job in this world comes out of selling. In every job you deal with coworkers that you want to convince of your ideas or convincing your boss that the project you want to work on is good for the company. These days, consumers and businesses are very well informed about services and products. When we are talking about highly complex products, such as IT solutions, businesses don’t accept your run-of-the-mill salesman who is pushing a sale. These are often long projects where salespeople have a consulting and leading role. Salespeople need to be able to consult companies and customers with their problem and convince a client that their solution is the best fit. Next to the fact that sales, is by far, not as scary and shady as you thought, there are a few points that will make you want to consider a sales career: Negotiating skills – When you are in sales you will learn how to negotiate. Salespeople learn to listen to their customers and try to make them happy, overcoming objections and come to a final agreement that both parties are happy with. Persistence/Challenge – As a salesperson you will often hear a negative answer, in a sales role you will start to embrace this and see a ‘no’ as a challenge not as a rejection. This attitude change can help you a lot in your career, but also in your personal life. You will become more optimistic and gain a go-getter attitude. Salary – As salespeople are seen as the moneymakers for the company, companies often reward their sales teams generously. Most likely in a sales role, you will receive a good basic salary and often you get nice bonuses on top of that based on your performance. Oracle is, for instance, the company that offers the highest average commission in the world. Further you can expect many other benefits as companies know that there is a high demand for good salespeople. Teamwork – Sales is a lot like having your own business, you are responsible for your own territory or set of clients. You are the one who is responsible for the revenue coming from that territory. So in order to gain revenue you will have to work together with many departments and people to make that happen. Every (potential) client could be seen as a different project, and you are the project leader. Understanding customers and the business – From any job that you choose sales will get you the most insight in the market. Salespeople are usually well-connected, talk with different customers and learn about the market and are up-to-date about all latest changes. Even if you want to change to a different role in the long run, you have a great head start as you understand the market and customers like no one else. Job security – Look at all the job postings out there. Many of them are sales-related. So if you want to have a steady job, plenty of choice and companies willing to invest in you, sales could be something for you. Are you interested in exploring a sales career? At Oracle we are always looking for good sales professionals and fresh graduates who want to get into sales! For many languages such as Flemish, Dutch, German, French, Swedish and Norwegian (and more) we are currently looking for graduates who want to develop their career in Oracle. Please have a look at this article for the experience of a Business Development Consultant at Oracle in Dublin. Want to learn more about this job check out this link or send an email to jessica.ebbelaar-at-oracle.com! Have a look at our website http://campus.oracle.com for all of our other latest sales and non-sales vacancies!

Read the article

Drive Online Engagement with Intuitive Portals and Websites

- by kellsey.ruppel

As more and more business is being conducted via online channels, engaging users and making them more productive and efficient though these online channels is becoming critical. These users could be customers, partners or employees and while the respective channels through which they interact might be different, these users do increasingly interact with your business through the Web, or mobile devices or now through various social mediums. Businesses need a user engagement strategy and solution that allows them to deliver targeted and personalized content and applications to users through the various online mediums and touch points. The customer experience today is made up of an ongoing set of interactions with organizations across many channels, online and offline. The Direct channel (including sales reps, email and mail) is an important point of contact, as is the Contact Center. Contact Centers rely on the phone as a means of interacting with customers, and also more now than ever, the Web as well. However, the online organization is often managed separately from the Contact Center organization within a business. In-store is an important channel for retailers, offering Point-of-Service for human interactions, and Kiosks which enable self-service. Kiosks are a Web-enabled touch point but in-store kiosks are often managed by the head of retail operations, rather than the online organization. And of course, the online channel, including customer interactions with an organization via digital means -- on the website, mobile websites, and social networking sites, has risen to paramount importance in recent years in the customer experience. Historically all of these channels have been managed separately. The result of all of this fragmentation is that the customer touch points with an organization are siloed. Their interactions online are not known and respected in their dealings in-store. Their calls to the contact center are not taken as input into what the website offers them when they arrive. Think of how many times you’ve fallen victim to this. Your experience with the company call center is different than the experience in-store. Your experience with the company website on your desktop computer is different than your experience on your iPad. I think you get the point. But the customer isn’t the only one we need to look at here, as employees and the IT organization have challenges as well when it comes to online engagement. There are many common tools and technologies that organizations have been using to try and engage users, whether it’s customers, employees or partners. Some have adopted different blog and wiki technologies (some hosted, some open source, sometimes embedded in platforms), to things like tagging, file sharing and content management, or composite applications for self-service applications and activity streams. Basically, there are so many different tools & technologies that each address different aspects of user engagement. Now, one of the challenges with this, is that if we look at each individual tool, typically just implementing for example a file sharing and basic collaboration solution, may meet the needs of the business user for one aspect of user engagement, but it may not be the best solution to engage with customers and partners, or it may not fit with IT standards such as integrating with their single sign on tools or their corporate website. Often, the scenario is that businesses are having to acquire multiple pieces and parts as well as build custom applications to meet their needs. Leaving customers and partners with a more fragmented way of interacting with the company. Every organization has some sort of enterprise balancing act between the needs of the business user and the needs and restrictions enforced by enterprise IT groups. As we’ve been discussing, we all know that the expectations for online engagement have changed since the days of the static, one-size fits all website. With these changes have come some very difficult organizational challenges as well. Today, as a business user, you want to engage with your customers, and your customers expect you to know who they are. They expect you to recall the details they’ve provided to you on your website, to your CSRs and to your sales people. They expect you to remember their purchases, their preferences and their problems. And they expect you to know who they are, equally well, across channels, including your web presence. This creates a host of challenges for today’s business users. Delivering targeted, relevant content online is now essential for converting prospects into customers and for engendering long term loyalty. Business users need the ability to leverage customer data from different sources to fuel their segmentation and targeting strategies and to easily set-up, manage and optimize online campaigns. Also critical, they need the ability to accomplish these things on-the-fly, at the speed of the marketplace, while making iterative improvements. These changing expectations put a host of demands on the IT organization as well. The web presence must be able to scale to support the delivery of personalized and targeted content to thousands of site visitors without sacrificing performance. And integration between systems becomes more important as well, as organizations strive to obtain one view of the customer culled from WCM data, CRM data and more. So then, how do you solve these challenges and meet the growing demands of your users? You need a solution that: Unifies every customer interaction across all channels Personalizes the products and content that interest the customer and to the device Delivers targeted promotions to the right customer Engages and improve employee productivity Provides self-service access to applications Includes embedded in-context social So how then do you achieve this level of online engagement, complete customer experience and engage your employees? The answer: Oracle WebCenter. If you want to learn how to get there, we encourage you to attend this webcast on Thursday Drive Online Engagement with Intuitive Portals and Websites, where we'll talk about how you are able to transform your portal experience and optimize online engagement -- making your portals more interactive and more engaging across multiple channels. Register today!

Read the article

Namespaces are obsolete

- by Bertrand Le Roy

To those of us who have been around for a while, namespaces have been part of the landscape. One could even say that they have been defining the large-scale features of the landscape in question. However, something happened fairly recently that I think makes this venerable structure obsolete. Before I explain this development and why it’s a superior concept to namespaces, let me recapitulate what namespaces are and why they’ve been so good to us over the years… Namespaces are used for a few different things: Scope: a namespace delimits the portion of code where a name (for a class, sub-namespace, etc.) has the specified meaning. Namespaces are usually the highest-level scoping structures in a software package. Collision prevention: name collisions are a universal problem. Some systems, such as jQuery, wave it away, but the problem remains. Namespaces provide a reasonable approach to global uniqueness (and in some implementations such as XML, enforce it). In .NET, there are ways to relocate a namespace to avoid those rare collision cases. Hierarchy: programmers like neat little boxes, and especially boxes within boxes within boxes. For some reason. Regular human beings on the other hand, tend to think linearly, which is why the Windows explorer for example has tried in a few different ways to flatten the file system hierarchy for the user. 1 is clearly useful because we need to protect our code from bleeding effects from the rest of the application (and vice versa). A language with only global constructs may be what some of us started programming on, but it’s not desirable in any way today. 2 may not be always reasonably worth the trouble (jQuery is doing fine with its global plug-in namespace), but we still need it in many cases. One should note however that globally unique names are not the only possible implementation. In fact, they are a rather extreme solution. What we really care about is collision prevention within our application. What happens outside is irrelevant. 3 is, more than anything, an aesthetical choice. A common convention has been to encode the whole pedigree of the code into the namespace. Come to think about it, we never think we need to import “Microsoft.SqlServer.Management.Smo.Agent” and that would be very hard to remember. What we want to do is bring nHibernate into our app. And this is precisely what you’ll do with modern package managers and module loaders. I want to take the specific example of RequireJS, which is commonly used with Node. Here is how you import a module with RequireJS: var http = require("http"); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This is of course importing a HTTP stack module into the code. There is no noise here. Let’s break this down. Scope (1) is provided by the one scoping mechanism in JavaScript: the closure surrounding the module’s code. Whatever scoping mechanism is provided by the language would be fine here. Collision prevention (2) is very elegantly handled. Whereas relocating is an afterthought, and an exceptional measure with namespaces, it is here on the frontline. You always relocate, using an extremely familiar pattern: variable assignment. We are very much used to managing our local variable names and any possible collision will get solved very easily by picking a different name. Wait a minute, I hear some of you say. This is only taking care of collisions on the client-side, on the left of that assignment. What if I have two libraries with the name “http”? Well, You can better qualify the path to the module, which is what the require parameter really is. As for hierarchical organization, you don’t really want that, do you? RequireJS’ module pattern does elegantly cover the bases that namespaces used to cover, but it also promotes additional good practices. First, it promotes usage of self-contained, single responsibility units of code through the closure-based, stricter scoping mechanism. Namespaces are somewhat more porous, as using/import statements can be used bi-directionally, which leads us to my second point… Sane dependency graphs are easier to achieve and sustain with such a structure. With namespaces, it is easy to construct dependency cycles (that’s bad, mmkay?). With this pattern, the equivalent would be to build mega-components, which are an easier problem to spot than a decay into inter-dependent namespaces, for which you need specialized tools. I really like this pattern very much, and I would like to see more environments implement it. One could argue that dependency injection has some commonalities with this for example. What do you think? This is the half-baked result of some morning shower reflections, and I’d love to read your thoughts about it. What am I missing?

Read the article

Best Practices - Dynamic Reconfiguration

- by jsavit

This post is one of a series of "best practices" notes for Oracle VM Server for SPARC (formerly named Logical Domains) Overview of dynamic Reconfiguration Oracle VM Server for SPARC supports Dynamic Reconfiguration (DR), making it possible to add or remove resources to or from a domain (virtual machine) while it is running. This is extremely useful because resources can be shifted to or from virtual machines in response to load conditions without having to reboot or interrupt running applications. For example, if an application requires more CPU capacity, you can add CPUs to improve performance, and remove them when they are no longer needed. You can use even use Dynamic Resource Management (DRM) policies that automatically add and remove CPUs to domains based on load. How it works (in broad general terms) Dynamic Reconfiguration is done in coordination with Solaris, which recognises a hypervisor request to change its virtual machine configuration and responds appropriately. In essence, Solaris receives a message saying "you now have 16 more CPUs numbered 16 to 31" or "8GB more RAM starting at address X" or "here's a new network or disk device - have fun with it". These actions take very little time. Solaris then can start using the new resource. In the case of added CPUs, that means dispatching processes and potentially binding interrupts to the new CPUs. For memory, Solaris adds the new memory pages to its "free" list and starts using them. Comparable actions occur with network and disk devices: they are recognised by Solaris and then used. Removing is the reverse process: after receiving the DR message to free specific CPUs, Solaris unbinds interrupts assigned to the CPUs and stops dispatching process threads. That takes very little time. primary # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- SP 16 4G 1.0% 6d 22h 29m ldom1 active -n---- 5000 16 8G 0.9% 6h 59m primary # ldm set-core 5 ldom1 primary # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- SP 16 4G 0.2% 6d 22h 29m ldom1 active -n---- 5000 40 8G 0.1% 6h 59m primary # ldm set-core 2 ldom1 primary # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- SP 16 4G 1.0% 6d 22h 29m ldom1 active -n---- 5000 16 8G 0.9% 6h 59m Memory pages are vacated by copying their contents to other memory locations and wiping them clean. Solaris may have to swap memory contents to disk if the remaining RAM isn't enough to hold all the contents. For this reason, deallocating memory can take longer on a loaded system. Even on a lightly loaded system it took several 7 or 8 seconds to switch the domain below between 8GB and 24GB of RAM. primary # ldm set-mem 24g ldom1 primary # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- SP 16 4G 0.1% 6d 22h 36m ldom1 active -n---- 5000 16 24G 0.2% 7h 6m primary # ldm set-mem 8g ldom1 primary # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- SP 16 4G 0.7% 6d 22h 37m ldom1 active -n---- 5000 16 8G 0.3% 7h 7m What if the device is in use? (this is the anecdote that inspired this blog post) If CPU or memory is being removed, releasing it pretty straightforward, using the method described above. The resources are released, and Solaris continues with less capacity. It's not as simple with a network or I/O device: you don't want to yank a device out from underneath an application that might be using it. In the following example, I've added a virtual network device to ldom1 and want to take it away, even though it's been plumbed. primary # ldm rm-vnet vnet19 ldom1 Guest LDom returned the following reason for failing the operation: Resource Information ---------------------------------------------------------- ----------------------- /devices/virtual-devices@100/channel-devices@200/network@1 Network interface net1 VIO operation failed because device is being used in LDom ldom1 Failed to remove VNET instance That's what I call a helpful error message - telling me exactly what was wrong. In this case the problem is easily solved. I know this NIC is seen in the guest as net1 so: ldom1 # ifconfig net1 down unplumb Now I can dispose of it, and even the virtual switch I had created for it: primary # ldm rm-vnet vnet19 ldom1 primary # ldm rm-vsw primary-vsw9 If I had to take away the device disruptively, I could have used ldm rm-vnet -f but that could disrupt whoever was using it. It's better if that can be avoided. Summary Oracle VM Server for SPARC provides dynamic reconfiguration, which lets you modify a guest domain's CPU, memory and I/O configuration on the fly without reboot. You can add and remove resources as needed, and even automate this for CPUs by setting up resource policies. Taking things away can be more complicated than giving, especially for devices like disks and networks that may contain application and system state or be involved in a transaction. LDoms and Solaris cooperative work together to coordinate resource allocation and de-allocation in a safe and effective way. For best practices, use dynamic reconfiguration to make the best use of your system's resources.

Read the article

Invitation to the Oracle EDGE Applications Partner Roadshow

- by Hartmut Wiese

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 This is a unique opportunity for any Oracle Alliance & Channel Managers & their Partners to connect with the Oracle Edge Sales and Management Team to understand the relevance and value of the entire Oracle Edge Portfolio of Applications in solving complex customer issues and supporting a variety of evolving Partner Go-To-Market business models. Oracle Edge Applications (PLM, VCE, VCP, MDM, GRC, OPA) With strong participation from the key Oracle Edge Applications Sales business leaders, attendees will get the opportunity to hear about the benefits of the Oracle Edge Solutions within three different value-added contexts: Value 1: Oracle Edge Application Strategy Value 2: Oracle Value Chain Transformation Vision Value 3: Individual Application Business Line Differentiators Following on from the morning presentations, Oracle Partners will also get the opportunity in the afternoon to challenge and discuss the value of Oracle Edge Applications in the context of their own Go-To-Market business models. These sensitive discussions will be managed via focused 1-2-1 breakout meetings with the relevant Oracle Edge Applications Sales Business Leaders. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} When Where To Register Tuesday, July 09th 2013 09 am to 04 pm Utrecht Register now Tuesday, July 16th 2013 09 am to 04 pm London Register now Wednesday, August 28th 2013 09 am to 04 pm Paris Register now IIMPORTANT NOTE: ONLY 60 ATTENDEE PLACES AVAILABLE PER LOCATION - BOOK NOW TO AVOID MISSING OUT. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} There is a strict limit to the number of people who can attend this event based on site logistics for the day. Please note that Partners will be given priority over Oracle personnel registrations. Partners however may only register a maximum of 2 personnel from their company plus the supporting local Oracle Alliance & Channel Manager /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

JPRT: A Build & Test System

- by kto

DRAFT A while back I did a little blogging on a system called JPRT, the hardware used and a summary on my java.net weblog. This is an update on the JPRT system. JPRT ("JDK Putback Reliablity Testing", but ignore what the letters stand for, I change what they mean every day, just to annoy people :\^) is a build and test system for the JDK, or any source base that has been configured for JPRT. As I mentioned in the above blog, JPRT is a major modification to a system called PRT that the HotSpot VM development team has been using for many years, very successfully I might add. Keeping the source base always buildable and reliable is the first step in the 12 steps of dealing with your product quality... or was the 12 steps from Alcoholics Anonymous... oh well, anyway, it's the first of many steps. ;\^) Internally when we make changes to any part of the JDK, there are certain procedures we are required to perform prior to any putback or commit of the changes. The procedures often vary from team to team, depending on many factors, such as whether native code is changed, or if the change could impact other areas of the JDK. But a common requirement is a verification that the source base with the changes (and merged with the very latest source base) will build on many of not all 8 platforms, and a full 'from scratch' build, not an incremental build, which can hide full build problems. The testing needed varies, depending on what has been changed. Anyone that was worked on a project where multiple engineers or groups are submitting changes to a shared source base knows how disruptive a 'bad commit' can be on everyone. How many times have you heard: "So And So made a bunch of changes and now I can't build!". But multiply the number of platforms by 8, and make all the platforms old and antiquated OS versions with bizarre system setup requirements and you have a pretty complicated situation (see http://download.java.net/jdk6/docs/build/README-builds.html). We don't tolerate bad commits, but our enforcement is somewhat lacking, usually it's an 'after the fact' correction. Luckily the Source Code Management system we use (another antique called TeamWare) allows for a tree of repositories and 'bad commits' are usually isolated to a small team. Punishment to date has been pretty drastic, the Queen of Hearts in 'Alice in Wonderland' said 'Off With Their Heads', well trust me, you don't want to be the engineer doing a 'bad commit' to the JDK. With JPRT, hopefully this will become a thing of the past, not that we have had many 'bad commits' to the master source base, in general the teams doing the integrations know how important their jobs are and they rarely make 'bad commits'. So for these JDK integrators, maybe what JPRT does is keep them from chewing their finger nails at night. ;\^) Over the years each of the teams have accumulated sets of machines they use for building, or they use some of the shared machines available to all of us. But the hunt for build machines is just part of the job, or has been. And although the issues with consistency of the build machines hasn't been a horrible problem, often you never know if the Solaris build machine you are using has all the right patches, or if the Linux machine has the right service pack, or if the Windows machine has it's latest updates. Hopefully the JPRT system can solve this problem. When we ship the binary JDK bits, it is SO very important that the build machines are correct, and we know how difficult it is to get them setup. Sure, if you need to debug a JDK problem that only shows up on Windows XP or Solaris 9, you'll still need to hunt down a machine, but not as a regular everyday occurance. I'm a big fan of a regular nightly build and test system, constantly verifying that a source base builds and tests out. There are many examples of automated build/tests, some that trigger on any change to the source base, some that just run every night. Some provide a protection gateway to the 'golden' source base which only gets changes that the nightly process has verified are good. The JPRT (and PRT) system is meant to guard the source base before anything is sent to it, guarding all source bases from the evil developer, well maybe 'evil' isn't the right word, I haven't met many 'evil' developers, more like 'error prone' developers. ;\^) Humm, come to think about it, I may be one from time to time. :\^{ But the point is that by spreading the build up over a set of machines, and getting the turnaround down to under an hour, it becomes realistic to completely build on all platforms and test it, on every putback. We have the technology, we can build and rebuild and rebuild, and it will be better than it was before, ha ha... Anybody remember the Six Million Dollar Man? Man, I gotta get out more often.. Anyway, now the nightly build and test can become a 'fetch the latest JPRT build bits' and start extensive testing (the testing not done by JPRT, or the platforms not tested by JPRT). Is it Open Source? No, not yet. Would you like to be? Let me know. Or is it more important that you have the ability to use such a system for JDK changes? So enough blabbering on about this JPRT system, tell me what you think. And let me know if you want to hear more about it or not. Stay tuned for the next episode, same Bloody Bat time, same Bloody Bat channel. ;\^) -kto

Read the article

Changes to the LINQ-to-StreamInsight Dialect

- by Roman Schindlauer

In previous versions of StreamInsight (1.0 through 2.0), CepStream<> represents temporal streams of many varieties: Streams with ‘open’ inputs (e.g., those defined and composed over CepStream<T>.Create(string streamName) Streams with ‘partially bound’ inputs (e.g., those defined and composed over CepStream<T>.Create(Type adapterFactory, …)) Streams with fully bound inputs (e.g., those defined and composed over To*Stream – sequences or DQC) The stream may be embedded (where Server.Create is used) The stream may be remote (where Server.Connect is used) When adding support for new programming primitives in StreamInsight 2.1, we faced a choice: Add a fourth variety (use CepStream<> to represent streams that are bound the new programming model constructs), or introduce a separate type that represents temporal streams in the new user model. We opted for the latter. Introducing a new type has the effect of reducing the number of (confusing) runtime failures due to inappropriate uses of CepStream<> instances in the incorrect context. The new types are: IStreamable<>, which logically represents a temporal stream. IQStreamable<> : IStreamable<>, which represents a queryable temporal stream. Its relationship to IStreamable<> is analogous to the relationship of IQueryable<> to IEnumerable<>. The developer can compose temporal queries over remote stream sources using this type. The syntax of temporal queries composed over IQStreamable<> is mostly consistent with the syntax of our existing CepStream<>-based LINQ provider. However, we have taken the opportunity to refine certain aspects of the language surface. Differences are outlined below. Because 2.1 introduces new types to represent temporal queries, the changes outlined in this post do no impact existing StreamInsight applications using the existing types! SelectMany StreamInsight does not support the SelectMany operator in its usual form (which is analogous to SQL’s “CROSS APPLY” operator): static IEnumerable<R> SelectMany<T, R>(this IEnumerable<T> source, Func<T, IEnumerable<R>> collectionSelector) It instead uses SelectMany as a convenient syntactic representation of an inner join. The parameter to the selector function is thus unavailable. Because the parameter isn’t supported, its type in StreamInsight 1.0 – 2.0 wasn’t carefully scrutinized. Unfortunately, the type chosen for the parameter is nonsensical to LINQ programmers: static CepStream<R> SelectMany<T, R>(this CepStream<T> source, Expression<Func<CepStream<T>, CepStream<R>>> streamSelector) Using Unit as the type for the parameter accurately reflects the StreamInsight’s capabilities: static IQStreamable<R> SelectMany<T, R>(this IQStreamable<T> source, Expression<Func<Unit, IQStreamable<R>>> streamSelector) For queries that succeed – that is, queries that do not reference the stream selector parameter – there is no difference between the code written for the two overloads: from x in xs from y in ys select f(x, y) Top-K The Take operator used in StreamInsight causes confusion for LINQ programmers because it is applied to the (unbounded) stream rather than the (bounded) window, suggesting that the query as a whole will return k rows: (from win in xs.SnapshotWindow() from x in win orderby x.A select x.B).Take(k) The use of SelectMany is also unfortunate in this context because it implies the availability of the window parameter within the remainder of the comprehension. The following compiles but fails at runtime: (from win in xs.SnapshotWindow() from x in win orderby x.A select win).Take(k) The Take operator in 2.1 is applied to the window rather than the stream: Before After (from win in xs.SnapshotWindow() from x in win orderby x.A select x.B).Take(k) from win in xs.SnapshotWindow() from b in (from x in win orderby x.A select x.B).Take(k) select b Multicast We are introducing an explicit multicast operator in order to preserve expression identity, which is important given the semantics about moving code to and from StreamInsight. This also better matches existing LINQ dialects, such as Reactive. This pattern enables expressing multicasting in two ways: Implicit Explicit var ys = from x in xs where x.A > 1 select x; var zs = from y1 in ys from y2 in ys.ShiftEventTime(_ => TimeSpan.FromSeconds(1)) select y1 + y2; var ys = from x in xs where x.A > 1 select x; var zs = ys.Multicast(ys1 => from y1 in ys1 from y2 in ys1.ShiftEventTime(_ => TimeSpan.FromSeconds(1)) select y1 + y2; Notice the product translates an expression using implicit multicast into an expression using the explicit multicast operator. The user does not see this translation. Default window policies Only default window policies are supported in the new surface. Other policies can be simulated by using AlterEventLifetime. Before After xs.SnapshotWindow( WindowInputPolicy.ClipToWindow, SnapshotWindowInputPolicy.Clip) xs.SnapshotWindow() xs.TumblingWindow( TimeSpan.FromSeconds(1), HoppingWindowOutputPolicy.PointAlignToWindowEnd) xs.TumblingWindow( TimeSpan.FromSeconds(1)) xs.TumblingWindow( TimeSpan.FromSeconds(1), HoppingWindowOutputPolicy.ClipToWindowEnd) Not supported … LeftAntiJoin Representation of LASJ as a correlated sub-query in the LINQ surface is problematic as the StreamInsight engine does not support correlated sub-queries (see discussion of SelectMany). The current syntax requires the introduction of an otherwise unsupported ‘IsEmpty()’ operator. As a result, the pattern is not discoverable and implies capabilities not present in the server. The direct representation of LASJ is used instead: Before After from x in xs where (from y in ys where x.A > y.B select y).IsEmpty() select x xs.LeftAntiJoin(ys, (x, y) => x.A > y.B) from x in xs where (from y in ys where x.A == y.B select y).IsEmpty() select x xs.LeftAntiJoin(ys, x => x.A, y => y.B) ApplyWithUnion The ApplyWithUnion methods have been deprecated since their signatures are redundant given the standard SelectMany overloads: Before After xs.GroupBy(x => x.A).ApplyWithUnion(gs => from win in gs.SnapshotWindow() select win.Count()) xs.GroupBy(x => x.A).SelectMany( gs => from win in gs.SnapshotWindow() select win.Count()) xs.GroupBy(x => x.A).ApplyWithUnion(gs => from win in gs.SnapshotWindow() select win.Count(), r => new { r.Key, Count = r.Payload }) from x in xs group x by x.A into gs from win in gs.SnapshotWindow() select new { gs.Key, Count = win.Count() } Alternate UDO syntax The representation of UDOs in the StreamInsight LINQ dialect confuses cardinalities. Based on the semantics of user-defined operators in StreamInsight, one would expect to construct queries in the following form: from win in xs.SnapshotWindow() from y in MyUdo(win) select y Instead, the UDO proxy method is referenced within a projection, and the (many) results returned by the user code are automatically flattened into a stream: from win in xs.SnapshotWindow() select MyUdo(win) The “many-or-one” confusion is exemplified by the following example that compiles but fails at runtime: from win in xs.SnapshotWindow() select MyUdo(win) + win.Count() The above query must fail because the UDO is in fact returning many values per window while the count aggregate is returning one. Original syntax New alternate syntax from win in xs.SnapshotWindow() select win.UdoProxy(1) from win in xs.SnapshotWindow() from y in win.UserDefinedOperator(() => new Udo(1)) select y -or- from win in xs.SnapshotWindow() from y in win.UdoMacro(1) select y Notice that this formulation also sidesteps the dynamic type pitfalls of the existing “proxy method” approach to UDOs, in which the type of the UDO implementation (TInput, TOuput) and the type of its constructor arguments (TConfig) need to align in a precise and non-obvious way with the argument and return types for the corresponding proxy method. UDSO syntax UDSO currently leverages the DataContractSerializer to clone initial state for logical instances of the user operator. Initial state will instead be described by an expression in the new LINQ surface. Before After xs.Scan(new Udso()) xs.Scan(() => new Udso()) Name changes ShiftEventTime => AlterEventStartTime: The alter event lifetime overload taking a new start time value has been renamed. CountByStartTimeWindow => CountWindow

Search Results

Search found 14251 results on 571 pages for 'identity management'.

Page 539/571 | < Previous Page | 535 536 537 538 539 540 541 542 543 544 545 546 | Next Page >

- by Johnm

- by Dave Voyles

- by dragonfly

- by Janice J. Heiss

- by Kellsey Ruppel

- by exasperated

- by Tarun Arora

- by Mohgeroth

- by Maria Sandu

- by user9135656

- by Sam Drake

- by user739873

- by user12244672

- by Sparky41

- by jmorourke

- by vafa

- by FelixWehmeyer

- by kellsey.ruppel

- by Bertrand Le Roy

- by jsavit

- by Hartmut Wiese

- by David Swanger

- by kto

- by Roman Schindlauer

< Previous Page | 535 536 537 538 539 540 541 542 543 544 545 546 | Next Page >