Search Results

Search found 35976 results on 1440 pages for 'js test driver'.

Page 541/1440 | < Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >

  • Is ThinkPad X61T SD card slot SDXC compatible?

    - by trismarck
    I have a Thinkpad X61T 7763 tablet and I was planning to buy a 64GB card for the SD card slot. The 64GB card supports the new SDXC standard and I'm not sure if the SD card driver / hardware can handle that. So far, I've successfully used 8GB cards in the slot, but they were SDHC ones. Thinkpad manuals don't give the answer. I wonder if anyone tried this configuration already and what was the outcome.

    Read the article

  • How can one associate a 3ware controller with the corresponding /dev/tw?? device?

    - by barbaz
    I have a few 3ware RAID controllers installed in a system. Is there any way to figure out the mapping between the following identifiers, each describing in a way the very same RAID controller? The tw_cli reported controller id (e.g. c0,c1,c2,...) The corresponding device nodes that allow smartctl access via the 3ware driver (e.g. /dev/twa0, /dev/twa1, /dev/twl0) The block device presented to the system representing a RAID unit (/dev/sda, /dev/sdb,...)

    Read the article

  • No audio device detected

    - by Paul
    My computer has no audio. It says NO AUDIO DEVICE. I already installed Realtek AC97 and Realtek High Definition Audio Driver and I also pasted stream.dll to the Windows and system32 folders and I restarted my computer but it still says NO AUDIO DEVICE. Please help me. Thanks

    Read the article

  • Add an Excel file as a linked server in SQL 2012

    - by MgSam
    I'm trying to add a linked server to an Excel 2010 file from SQL Server 2012. Every reference I've found online for doing this is using older versions of SQL Server, and the driver that they tell you to use 'Microsoft.Jet.OLEDB.4.0', is not present in 2012 from what I can tell. Can anyone tell me which provider I need to use and what the product name, data source, and provider string should be? For reference, this is the screen I'm looking at: Thanks.

    Read the article

  • Software RAID for several HDs which retains files on each HD

    - by Fuxi
    Is there some kind of software/driver that would enable me to create one big volume out of several hard disks but retain the file structure on each HD? This would be in case where one hard disk crashes and only data on that HD will be lost. Windows 7 enables me to do that but in case one HD breaks all data will be lost.

    Read the article

  • WindowsXP with no drivers

    - by user38008
    So I formatted my windows XP and reinstalled it. But forsome reason my drivers disk is for the wrong Dell Model..... So I can't connect to the internet because I think I'm missing the ethernet driver. Am i screwed or can I obtain theses drivers elsewhere....

    Read the article

  • How do I know if DirectX is using hardware acceleration or software rendering?

    - by JohnIdol
    Is there any DirectX diagnostcs tool which will allow me to understand if Graphics acceleration from my GPU is actually working or software rendering is kicking-in instead? I ask this because If I go properties (right click on desktop) -- settings -- I get an error saying my drivers are not working for my Intel Embedded GPU (Intel Embedded Graphics Driver - IEGD) and the system is defaulting to standard VGA drivers. I am on WinXP Professional.

    Read the article

  • Windows 7 removes boot camp drivers on reboot

    - by beemzet
    I'm installing boot camp on 64 bit windows 7 home premium from a leopard disc. During installation I get a couple of errors saying that some driver publishers are not registered or something and I install them anyway. After reboot windows tries to repair something and reboots again. When I finally log in, there is no boot camp any more. Any ideas how to solve this? Thanks btw, I'm using Macbook Pro 15 inch Santa Rosa (late 2007)

    Read the article

  • External Access like VNC

    - by clone1018
    Hello. I need to access my dev server (running Ubuntu (non server version)) using something like VNC. But not using VNC because after several tries with it breaking (driver issues). I don't have a head (monitor) for the server. But I do have SSH access! :D Thanks

    Read the article

  • Ubuntu 10.04 live cd keyboard problem.

    - by Octa
    Today I downloaded the Ubuntu 10.04 x64 .iso but when trying it out in live cd the keyboard of both my laptop and a microsoft branded one didn't work. I was planning into installing Ubuntu in a partition but I couldn't even put my info in the installation process to do it. Is this a problem with the .iso or the driver? because I'm afraid that if I can actually go ahead with the installation then the keyboard won't work after that too.

    Read the article

  • Forcedeth - too many iterations (6) in > nv_nic_irq

    - by RyanC
    Hey, I'm having trouble with an onboard nvidia gigabit network, under times of heavy load on the network, I'm seeing this error logged: "too many iterations (6) in nv_nic_irq" I'm running Hadoop DFS over these NICs and I see checksum errors build up until the whole thing just fails. I'm running the 2.6.26-2-amd64 kernel, and my initial research seems to imply its a problem with the forcedeth driver. Has anyone run into this problem before? Thanks in advance if anyone can help! Ryan

    Read the article

  • Can only bring up one of two interfaces

    - by mstaessen
    I'm having a bizarre issue with my HP Proliant DL 360 G4p server. It has two gigabit ethernet interfaces but I can bring up only one of them. This is starting to freak me out and that's why I turned here. I'm running the x64 ubuntu 11.10 server edition. lshw -c network shows that the second interface is disabled. I have no idea why ans how to enable it. $ sudo lshw -c network *-network:0 description: Ethernet interface product: NetXtreme BCM5704 Gigabit Ethernet vendor: Broadcom Corporation physical id: 2 bus info: pci@0000:02:02.0 logical name: eth0 version: 10 serial: 00:18:71:e3:6d:26 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 66MHz capabilities: pcix pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 duplex=full firmware=5704-v3.27b, ASFIPMIc v2.36 ip=10.48.8.x latency=64 link=yes mingnt=64 multicast=yes port=twisted pair speed=100Mbit/s resources: irq:25 memory:fdf70000-fdf7ffff *-network:1 DISABLED description: Ethernet interface product: NetXtreme BCM5704 Gigabit Ethernet vendor: Broadcom Corporation physical id: 2.1 bus info: pci@0000:02:02.1 logical name: eth1 version: 10 serial: 00:18:71:e3:6d:25 capacity: 1Gbit/s width: 64 bits clock: 66MHz capabilities: pcix pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 firmware=5704-v3.27b latency=64 link=no mingnt=64 multicast=yes port=twisted pair resources: irq:26 memory:fdf60000-fdf6ffff If I try to ifup eth1, then I get $ sudo ifup eth1 Ignoring unknown interface eth1=eth1. I figured that's what happens when there is no eth1 listed in /etc/network/interfaces. But when I add the configuration for eth1, I still can't ifup. $ sudo ifup eth1 RTNETLINK answers: File exists Failed to bring up eth1. I've also tried ifconfig eth1 up but without any result. For clarity, I have added a masked version of /etc/network/interfaces. I don't think it is the cause of the problem though. $ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.48.8.x netmask 255.255.255.y network 10.48.8.z broadcast 10.48.8.t gateway 10.48.8.u auto eth1 iface eth1 inet static address 193.190.253.x netmask 255.255.255.y network 193.190.253.z broadcast 193.190.253.t gateway 193.190.253.u I really need some help fixing this. It's driving me crazy. Thanks.

    Read the article

  • Triple monitor setup in linux

    - by Brendan Abel
    I'm hoping there are some xorg gurus out there. I'm trying to get a three monitor setup working in linux. I have 2 lcd monitors and a tv, all different resolutions. I'm using 2 video cards; a 9800 GTX and 7900Gt. I've seen a lot of different posts about people trying to make this work, and in every case, they either gave up, or Xinerama magically solved all their problems. Basically, my main problem is that I cannot get Xinerama to work. Every time I turn it on in the options, my machine gets stuck in a neverending boot cycle. If I disable Xinerama, I just have three Xorg screens, but I can't drag windows from one to the other. I can get the 2 lcds on Twinview, and the tv on a separate Xorg screen no problem. But I don't really like this solution. I'd rather have them all on separate screens and stitch them together with Xinerama. Has anyone done this? Here's my xorg.conf for reference. p.s. This took me all of 30 seconds to set up in Windows XP! p.s.s. I've seen somewhere that maybe randr can solve my problems? But I'm not quite sure how? Section "Monitor" Identifier "Main1" VendorName "Acer" ModelName "H233H" HorizSync 40-70 VertRefresh 60 Option "dpms" EndSection #Section "Monitor" # Identifier "Main2" # VendorName "Acer" # ModelName "AL2216W" # HorizSync 40-70 # VertRefresh 60 # Option "dpms" #EndSection Section "Monitor" Identifier "Projector" VendorName "BenQ" ModelName "W500" HorizSync 44.955-45 VertRefresh 59.94-60 Option "dpms" EndSection Section "Device" Identifier "Card1" Driver "nvidia" VendorName "nvidia" BusID "PCI:5:0:0" BoardName "nVidia Corporation G92 [GeForce 9800 GTX+]" Option "ConnectedMonitor" "DFP,DFP" Option "NvAGP" "0" Option "NoLogo" "True" #Option "TVStandard" "HD720p" EndSection Section "Device" Identifier "Card2" Driver "nvidia" VendorName "nvidia" BusID "PCI:4:0:0" BoardName "nVidia Corporation G71 [GeForce 7900 GT/GTO]" Option "NvAGP" "0" Option "NoLogo" "True" Option "TVStandard" "HD720p" EndSection Section "Module" Load "glx" EndSection Section "Screen" Identifier "ScreenMain-0" Device "Card1-0" Monitor "Main1" DefaultDepth 24 Option "Twinview" Option "TwinViewOrientation" "RightOf" Option "MetaModes" "DFP-0: 1920x1080; DFP-1: 1680x1050" Option "HorizSync" "DFP-0: 40-70; DFP-1: 40-70" Option "VertRefresh" "DFP-0: 60; DFP-1: 60" #SubSection "Display" # Depth 24 # Virtual 4880 1080 #EndSubSection EndSection Section "Screen" Identifier "ScreenProjector" Device "Card2" Monitor "Projector" DefaultDepth 24 Option "MetaModes" "TV-0: 1280x720" Option "HorizSync" "TV-0: 44.955-45" Option "VertRefresh" "TV-0: 59.94-60" EndSection Section "ServerLayout" Identifier "BothTwinView" Screen "ScreenMain-0" Screen "ScreenProjector" LeftOf "ScreenMain-0" #Option "Xinerama" "on" # most important option let you window expand to three monitors EndSection

    Read the article

  • Make Mac OS X mouse acceleration more Windows-like

    - by TomA
    The mouse acceleration on Mac OS X is driving me nuts. It may work for touchpads but nothing beats the Windows' acceleration curves. Is there a way to modify the behaviour on OS X? I tried getting a Microsoft mouse driver for OS X but it didn't work since my mouse is not from Microsoft.

    Read the article

  • Print to 2 printer by default

    - by THEn
    Is it possible to print directly to two printers simultaneously? What I want to do is every time user prints a receipt it should print to PDF and to default printer. Is there any printer driver that does that? OS info : MS Windows XP Pro SP3.

    Read the article

  • What causes "The INF file you selected does not support this method of installation." error?

    - by AndrejaKo
    This question is related to this one. Also, I think it's not duplicate of this question, since I'm not asking about specific device but a more general case. Where can I find information about driver .inf files and how windows checks if they are usable? I know that many people do modify .inf files so there must be some information on the Internet. Basically I have a bad .inf file and would like to see what's wrong with it and how to fix it if possible.

    Read the article

  • Understanding exim configuration files

    - by bobobobo
    So, I want to understand what's going on with this Exim configuration directory. In /etc/exim4, there's: * exim4.conf.template * update-exim4.conf.conf * conf.d The conf.d has a mess of directories and files, and inside each are a bunch of if statements which I find really different. For example: maildir_home: debug_print = "T: maildir_home for $local_part@$domain" driver = appendfile .ifdef MAILDIR_HOME_MAILDIR_LOCATION directory = MAILDIR_HOME_MAILDIR_LOCATION .else directory = $home/Maildir .endif .ifdef MAILDIR_HOME_CREATE_DIRECTORY create_directory .endif .ifdef MAILDIR_HOME_CREATE_FILE My question is, where do the CAPS VARIABLES get defined how can I change them why are there so many if statements in these configuration files?

    Read the article

  • hp officejet 5510 is only printing blank pages if used with Ubuntu 9.10

    - by mutzel
    I'm trying to setup a hp officejet 5510 using HPLIP 3.10.2 under Ubuntu 9.10. The installation of the driver according to this guide was no problem but after installing and selecting the printer I was only able to print blank pages. The printer is working well under windows and scanning (its a multi-functional printer) is also possible under Ubuntu. Does anyone know this problem and a possible solution?

    Read the article

  • TrueCrypt System Favorite Volume doesn't mount automatically on boot

    - by Anders Hovgaard
    I've encrypted my system partition using TrueCrypt and I've read that I can mount my encrypted data partition (TrueCrypt volume) on boot by making it a "System Favorite" and giving it the same password as the system partition. However it doesn't work and I have to mount it manually every time. See this example. I've tried enabling "Cache pre-boot authentication password in driver memory (for mounting of non-system volumes)" in System - Settings, but that didn't change anything either. Any ideas?

    Read the article

  • IBM LTO 3 Tape drive periodically going "offline"

    - by bruno077
    I have a problem with a LTO 3 Tape Drive. I'm using Brightstor ArcServe Backup software with Windows Server 2003. Sometimes, the scheduled backups will stop working and going into "devices" inside this software reveals that the Tape Drive is offline. The only way to make it work again is uninstalling the Tape Drive's driver and rebooting the server: Windows then auto recognizes and installs the required drivers and the Tape Drive works again. Has anyone ever encountered a similar problem?

    Read the article

  • Enabling "USB Printing Support" in Windows 7

    - by Kevin Dente
    I'm trying to use an old parallel-port based printer with a USB-to-parallel port adapter on Windows 7. When I plug it into the USB port on the computer it's listed as an unrecognized device. I know that these cables typically use the "USB Printing Support" driver with makes USB ports show up as printer ports in the printer dialog. Is there a way to manually add USB Printing Support to Windows 7, since it isn't being added automatically?

    Read the article

  • Network Services disabled (not starting) on Windows XP

    - by Rickesh John
    I am currently running Windows XP Service Pack 3 on my system. But today, when I failed to connect to the internet, via a LAN cable, I realized that almost all of the vital network services had stopped functioning. Any attempts to start it through services.msc gives me the following message: Could not start the DNS Client Service on Local Computer Error 1068: The dependency service group failed to start All my software or services that are related to networking have stopped functioning, for example, Windows Firewall is turned off permanently, so is my Avast Anti-Virus' service of Real Time Shields and Web Shield. When I insert the LAN wire into my laptop, it registers itself, but this is what I get when I do a ping localhost C:>ping localhost Unable to contact IP driver, error code 2 Moveover, with ipconfig I get this : Windows IP Configuration An internal error occurred: The request is not supported. Please contact Microsoft Product Support Services for further help. Additional Information: Unable to query host name On some further poking around, I saw that none of the "NETWORK SERVICE" process in task manager, except svchost.exe were running. Also, when I first opened the task manager, I saw some 20 processes running with username column empty for most of them. With some search in Google, I found out that these services were important, DHCP DNS Net logon Network connection Network location Awareness TCP/IP Net BIOS Helper none of them, except Network Connections are working, they do not start. The event viewer of my system shows a bunch of 7000 and 7001 event errors. I have tried re installing the network driver, booting in safe mode with networking and tried to enable those services mentioned above. I had disabled System Restore some time back, so I have no restore points for my system. I tried a lot of things from Google searches but none of them worked. Also, with such a long list of issue, I am a little confused as to what should I search on the internet. :( One more thing I would like to mention, previous morning, my anti-virus Avast detected a RootKit buried deep in my system folders. It was removed, but maybe this was a problem caused by the root kit. I did run a boot-time scan but no viruses were found. Please please please advice. Is formatting and re-installation of Windows my only option?

    Read the article

  • Solaris: a simple script does not work, single command does

    - by CSG
    In my Solaris Illumos, I run a simple script: update_drv -a -i '[myhardware]' [driver] svcadm disable stmf svccfg import /mypath/myconfig svcadm enable stmf It does not work and gives me no error. The service stmf goes in maintenance mode and I must reboot! I've discovered that if I run the single commands from console, it works but if I put it into a script, it works only the first line. Can you explain this behavior?

    Read the article

  • Enabling "USB Printing Support" in Windows 7

    - by Kevin Dente
    I'm trying to use an old parallel-port based printer with a USB-to-parallel port adapter on Windows 7. When I plug it into the USB port on the computer it's listed as an unrecognized device. I know that these cables typically use the "USB Printing Support" driver with makes USB ports show up as printer ports in the printer dialog. Is there a way to manually add USB Printing Support to Windows 7, since it isn't being added automatically?

    Read the article

< Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >