lua table - Page 551 - Developer IT

C# : Forcing a clean run in a long running SQL reader loop?

- by Wardy

I have a SQL data reader that reads 2 columns from a sql db table. once it has done its bit it then starts again selecting another 2 columns. I would pull the whole lot in one go but that presents a whole other set of challenges. My problem is that the table contains a large amount of data (some 3 million rows or so) which makes working with the entire set a bit of a problem. I'm trying to validate the field values so i'm pulling the ID column then one of the other cols and running each value in the column through a validation pipeline where the results are stored in another database. My problem is that when the reader hits the end of handlin one column I need to force it to immediately clean up every little block of ram used as this process uses about 700MB and it has about 200 columns to go through. Without a full Garbage Collect I will definately run out of ram. Anyone got any ideas how I can do this? I'm using lots of small reusable objects, my thought was that I could just call GC.Collect() on the end of each read cycle and that would flush everything out, unfortunately that isn't happening for some reason.

Read the article

SQL UNION ALL with a INNER JOIN

- by kOhm

I'm looking for the best way to display all rows from two tables while joining first by one field (dwg) then where applicable a 2nd join on part. Table1 data consists of schematics(dwg) along with a list of parts required to build the item depicted in the drawing. Table2 consists of data about the actual parts ordered to build the schematic. Some parts in table2 are a combination of parts in table1 (ex: foo and bar in table1 were ordered as foobar in table2). I can display all rows in both tables with UNION ALL, but this doesn't join on both the dwg and part fields. I looked at FULL OUTER JOIN also, but I haven't figured out how to join first by dwg, then by part. Here is an example of the data. table1 table2 dwg part qty order dwg part qty ----- ----- ----- ----- ----- ----- ----- 123 foo 1 ord1 123 foobar 1 123 bar 1 ord1 123 bracket 2 123 widget 2 ord2 123 screw 4 123 bracket 4 ord2 123 nut 4 456 foo 1 ord2 123 widget 2 ord2 123 bracket 2 ord3 456 foo 1 Desired output: The goal is to create a view that provides visibility to all parts in table1 and the associated orders in table2 (including those parts that appear in one but not the other table) so that I can see all the drawing parts in table1 and the associated records in table2 along with records in table2 where the part wasn't in table1. part_request_order_report dwg part qty order part qty ----- ----- ----- ------ ----- ----- 123 foo 1 123 bar 1 123 widget 2 ord2 widget 2 123 bracket 4 ord1 bracket 2 123 bracket 4 ord2 bracket 2 123 ord1 foobar 1 123 ord1 screw 4 123 ord1 nut 4 456 foo 1 ord3 foo 1 Is this possible? Or am I better off iterating through the data to build the report table? Thanks in advance.

Read the article

How to query MySQL for exact length and exact UTF-8 characters

- by oskarae

I have table with words dictionary in my language (latvian). CREATE TABLE words ( value varchar(255) COLLATE utf8_unicode_ci DEFAULT NULL ) ENGINE=MyISAM DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci; And let's say it has 3 words inside: INSERT INTO words (value) VALUES ('teja'); INSERT INTO words (value) VALUES ('vejš'); INSERT INTO words (value) VALUES ('feja'); What I want to do is I want to find all words that is exactly 4 characters long and where second character is 'e' and third character is 'j' For me it feels that correct query would be: SELECT * FROM words WHERE value LIKE '_ej_'; But problem with this query is that it returs not 2 entries ('teja','vejš') but all three. As I understand it is because internally MySQL converts strings to some ASCII representation? Then there is BINARY addition possible for LIKE SELECT * FROM words WHERE value LIKE BINARY '_ej_'; But this also does not return 2 entries ('teja','vejš') but only one ('teja'). I believe this has something to do with UTF-8 2 bytes for non ASCII chars? So question: What MySQL query would return my exact two words ('teja','vejš')? Thank you in advance

Read the article

SQL Server 2008 spatial index and CPU utilization with MapGuide Open Source 2.1

- by Antonio de la Peña

I have a SQL Server table with hundreds of thousands of geometry type parcels. I have made indexes on them trying different combinations of density and objects per cell settings. So far I'm settiling for LOW, LOW, MEDIUM, MEDIUM and 16 objects per cell and I made a SP that sets the bounding box according to the extents of the entities in the table. There is an incredible performance boost from queries taking almost minutes without index to less than seconds, it gets faster when the zoom is closer thus less objects are displayed. Yet the CPU utilization gets to 100% when querying for features, even when the queries themselves are fast. I'm worrying this will not fly in a production environment. I am using MapGuide Open Source 2.1 for this project, but I am positive the CPU load is caused by SQL Server. I wonder if my indexes are set properly. I haven't found any clear documentation on how to properly set them up. Every article I've read basically says "it depends..." but nothing specific. Do you have any recommendations for me, including books, articles? Thank you.

Read the article

How to Specify Columntype in fluent nHibernate?

- by Bipul

I have a class CaptionItem public class CaptionItem { public virtual int SystemId { get; set; } public virtual int Version { get; set; } protected internal virtual IDictionary<string, string> CaptionValues {get; private set;} } I am using following code for nHibernate mapping Id(x => x.SystemId); Version(x => x.Version); Cache.ReadWrite().IncludeAll(); HasMany(x => x.CaptionValues) .KeyColumn("CaptionItem_Id") .AsMap<string>(idx => idx.Column("CaptionSet_Name"), elem => elem.Column("Text")) .Not.LazyLoad() .Cascade.Delete() .Table("CaptionValue") .Cache.ReadWrite().IncludeAll(); So in database two tables get created. One CaptionValue and other CaptionItem. In CaptionItem table has three columns 1. CaptionItem_Id int 2. Text nvarchar(255) 3. CaptionSet_Name nvarchar(255) Now, my question is how can I make the columnt type of Text to nvarchar(max)? Thanks in advance.

Read the article

Ruby on Rails Associations

- by Eef

Hey all, I am starting to create my sites in Ruby on Rails these days instead of PHP. I have picked up the language easily but still not 100% confident with associations :) I have this situation: User Model has_and_belongs_to_many :roles Roles Model has_and_belongs_to_many :users Journal Model has_and_belongs_to_many :roles So I have a roles_users table and a journals_roles table I can access the user roles like so: user = User.find(1) User.roles This gives me the roles assigned to the user, I can then access the journal model like so: journals = user.roles.first.journals This gets me the journals associated with the user based on the roles. I want to be able to access the journals like so user.journals In my user model I have tried this: def journals self.roles.collect { |role| role.journals }.flatten end This gets me the journals in a flatten array but unfortunately I am unable to access anything associated with journals in this case, e.g in the journals model it has: has_many :items When I try to access user.journals.items it does not work as it is a flatten array which I am trying to access the has_many association. Is it possible to get the user.journals another way other than the way I have shown above with the collect method? Hope you guys understand what I mean, if not let me know and ill try to explain it better. Cheers Eef

Read the article

Which SQL statements to execute with intersection / junction tables

- by user1455103

Here a simplified database layout One condo can hold multiple properties (flats, garage boxes, etc) - 1->n relationship One owner can have multiple properties in the same condo and properties can have more than one owner (m->n changed to 1->n with the junction table) One condo can have multiple owners - 1->n Some additional clarification: A owner is a member of a condo. A condo is made of properties belonging to owners BUT a owner is not linked to a property directly (there can be no relation between a property and a owner for a certain time BUT there will ALWAYS be a relation between a owner and a condo). Reason for this: the agent managing the condo will first create a list of owners and a list of properties. It is only later thet he will "link" each property to one or multiple owners (or inversely) I'm quite new to SQL. What SQL statements should I execute to: SELECT, for a specific condo (WHERE condition), the properties and their respective owners (all properties should be listed even if owners are null) SELECT, for a specific condo (WHERE condition), the owners along with their properties (all owners should be listed even if properties are null) UPDATE / DELETE existing owners (I'm uncertain about how to handle the operation for the junction tables. Should I first check if there is an entry in the junction table or not ?) UPDATE / DELETE existing properties (same concern) INSERT new owners (should I use two different SQL statements depending if the owner should be linked to a property or NOT - IF condition ?) INSERT new properties (same question as above) Could you be as clear and generic as possible so that it can be reused ? :-)

Read the article

Object reference not set to an instance of an object

- by MBTHQ

Can anyone help with the following code? I'm trying to get data from the database colum to the datagridview... I'm getting error over here "Dim sql_1 As String = "SELECT * FROM item where item_id = '" + DataGridView_stockout.CurrentCell.Value.ToString() + "'"" Private Sub DataGridView_stockout_CellMouseClick(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellMouseEventArgs) Handles DataGridView_stockout.CellMouseClick Dim i As Integer = Stock_checkDataSet1.Tables(0).Rows.Count > 0 Dim thiscur_stok As New System.Data.SqlClient.SqlConnection("Data Source=MBTHQ\SQLEXPRESS;Initial Catalog=stock_check;Integrated Security=True") ' Sql Query Dim sql_1 As String = "SELECT * FROM item where item_id = '" + DataGridView_stockout.CurrentCell.Value.ToString() + "'" ' Create Data Adapter Dim da_1 As New SqlDataAdapter(sql_1, thiscur_stok) ' Fill Dataset and Get Data Table da_1.Fill(Stock_checkDataSet1, "item") Dim dt_1 As DataTable = Stock_checkDataSet1.Tables("item") If i >= DataGridView_stockout.Rows.Count Then 'MessageBox.Show("Sorry, DataGridView_stockout doesn't any row at index " & i.ToString()) Exit Sub End If If 1 >= Stock_checkDataSet1.Tables.Count Then 'MessageBox.Show("Sorry, Stock_checkDataSet1 doesn't any table at index 1") Exit Sub End If If i >= Stock_checkDataSet1.Tables(1).Rows.Count Then 'MessageBox.Show("Sorry, Stock_checkDataSet1.Tables(1) doesn't any row at index " & i.ToString()) Exit Sub End If If Not Stock_checkDataSet1.Tables(1).Columns.Contains("os") Then 'MessageBox.Show("Sorry, Stock_checkDataSet1.Tables(1) doesn't any column named 'os'") Exit Sub End If 'DataGridView_stockout.Item("cs_stockout", i).Value = Stock_checkDataSet1.Tables(0).Rows(i).Item("os") Dim ab As String = Stock_checkDataSet1.Tables(0).Rows(i)(0).ToString() End Sub I keep on getting the error saying "Object reference not set to an instance of an object" I dont know where I'm going wrong. Help really appreciated!!

Read the article

Distribute budget over for ranked components in SQL

- by Lee

Assume I have a budget of $10 (any integer) and I want to distribute it over records which have rank field with varying needs. Example: rank Req. Fulfilled? 1 $3 Y 2 $4 Y 3 $2 Y 4 $3 N Those ranks from 1 to 3 should be fulfilled because they are within budget. whereas, the one ranked 4 should not. I want an SQL query to solve that. Below is my initial script: CREATE TABLE budget ( id VARCHAR (32), budget INTEGER, PRIMARY KEY (id)); CREATE TABLE component ( id VARCHAR (32), rank INTEGER, req INTEGER, satisfied BOOLEAN, PRIMARY KEY (id)); INSERT INTO budget (id,budget) VALUES ('1',10); INSERT INTO component (id,rank,req) VALUES ('1',1,3); INSERT INTO component (id,rank,req) VALUES ('2',2,4); INSERT INTO component (id,rank,req) VALUES ('3',3,2); INSERT INTO component (id,rank,req) VALUES ('4',4,3); Thanks in advance for your help. Lee

Read the article

Domain model for an optional many-many relationship

- by Greg

Let's say I'm modeling phone numbers. I have one entity for PhoneNumber, and one for Person. There's a link table that expresses the link (if any) between the PhoneNumber and Person. The link table also has a field for DisplayOrder. When accessing my domain model, I have several Use Cases for viewing a Person. I can look at them without any PhoneNumber information. I can look at them for a specific PhoneNumber. I can look at them and all of their current (or past) PhoneNumbers. I'm trying to model Person, not only for the standard CRUD operations, but for the (un)assignment of PhoneNumbers to a Person. I'm having trouble expressing the relationship between the two, especially with respects to the DisplayOrder property. I can think of several solutions but I'm not sure of which (if any) would be best. A PhoneNumberPerson class that has a Person and PhoneNumber property (most closely resembles database design) A PhoneCarryingPerson class that inherits from Person and has a PhoneNumber property. A PhoneNumber and/or PhoneNumbers property on Person (and vis-a-versa, a Person property on PhoneNumber) What would be a good way to model this that makes sense from a domain model perspective? How do I avoid misplaced properties (DisplayOrder on Person) or conditionally populated properties?

Read the article

MySQL query optimization - distinct, order by and limit

- by Manuel Darveau

Read the article

Conditionally Summing the same Column multiple times in a single select statement?

- by btollett

I have a single table that shows employee deployments, for various types of deployment, in a given location for each month: ID | Location_ID | Date | NumEmployees | DeploymentType_ID As an example, a few records might be: 1 | L1 | 12/2010 | 7 | 1 (=Permanent) 2 | L1 | 12/2010 | 2 | 2 (=Temp) 3 | L1 | 12/2010 | 1 | 3 (=Support) 4 | L1 | 01/2011 | 4 | 1 5 | L1 | 01/2011 | 2 | 2 6 | L1 | 01/2011 | 1 | 3 7 | L2 | 12/2010 | 6 | 1 8 | L2 | 01/2011 | 6 | 1 9 | L2 | 12/2010 | 3 | 2 What I need to do is sum the various types of people by date, such that the results look something like this: Date | Total Perm | Total Temp | Total Supp 12/2010 | 13 | 5 | 1 01/2011 | 10 | 2 | 1 Currently, I've created a separate query for each deployment type that looks like this: SELECT Date, SUM(NumEmployees) AS "Total Permanent" FROM tblDeployment WHERE DeploymentType_ID=1 GROUP BY Date; We'll call that query qSumPermDeployments. Then, I'm using a couple of joins to combine the queries: SELECT qSumPermDeployments.Date, qSumPermDeployments.["Total Permanent"] AS "Permanent" qSumTempDeployments.["Total Temp"] AS "Temp" qSumSupportDeployments.["Total Support"] AS Support FROM (qSumPermDeployments LEFT JOIN qSumTempDeployments ON qSumPermDeployments.Date = qSumTempDeployments.Date) LEFT JOIN qSumSupportDeployments ON qSumPermDeployments.Date = qSumSupportDeployments.Date; Note that I'm currently constructing that final query under the assumption that a location will only have temp or support employees if they also have permanent employees. Thus, I can create the joins using the permanent employee results as the base table. Given all of the data I currently have, that assumption holds up, but ideally I'd like to move away from that assumption. So finally, my question. Is there a way to simplify this down to a single query or is it best to separate it out into multiple queries - if for no other reason that readability.

Read the article

How do I push another viewController onto the navigationController from within a tabviewController?

- by user207788

Hi, I have a project set up using these two tutorials. http://twilloapp.blogspot.com/2009/03/how-to-embed-navigation-controller.html and the link for the second tutorial is at the bottom of the first. The tutorial is slightly outdated but I managed to get it to work as advertised. Now I want to push a new detailedView onto the NavigationController when a user touches a row in the table view. So I added this to my MyTableViewController.m file. - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { // Navigation logic may go here. Create and push another view controller. SecondViewController *detailViewController = [[SecondViewController alloc] initWithNibName:@"SecondViewController.xib" bundle:nil]; // ... // Pass the selected object to the new view controller. [self.navigationController pushViewController:detailViewController animated:YES]; [detailViewController release]; } Now when I run this project and touch a row in my table view I am getting an error: asm_Terminating_due_to_uncaught_exception IT seems to be having an issue loading the SecondViewController from nib, however I checked the detailViewController and it is not nil. I know I am missing something and it is more than likely something simple. Please help. Thanks, Bruce

Read the article

How to model has_many with polymorphism?

- by Daniel Abrahamsson

I've run into a situation that I am not quite sure how to model. Suppose I have a User class, and a user has many services. However, these services are quite different, for example a MailService and a BackupService, so single table inheritance won't do. Instead, I am thinking of using polymorphic associations together with an abstract base class: class User < ActiveRecord::Base has_many :services end class Service < ActiveRecord::Base validates_presence_of :user_id, :implementation_id, :implementation_type belongs_to :user belongs_to :implementation, :polymorphic = true delegate :common_service_method, :name, :to => :implementation end #Base class for service implementations class ServiceImplementation < ActiveRecord::Base validates_presence_of :user_id, :on => :create has_one :service, :as => :implementation has_one :user, :through => :service after_create :create_service_record #Tell Rails this class does not use a table. def self.abstract_class? true end #Default name implementation. def name self.class.name end protected #Sets up a service object def create_service_record service = Service.new(:user_id => user_id) service.implementation = self service.save! end end class MailService < ServiceImplementation #validations, etc... def common_service_method puts "MailService implementation of common service method" end end #Example usage MailService.create(..., :user_id => user.id) BackupService.create(...., :user_id => user.id) user.services.each do |s| puts "#{user.name} is using #{s.name}" end #Daniel is using MailService, Daniel is using BackupService So, is this the best solution? Or even a good one? How have you solved this kind of problem?

Read the article

How can I get the rank of rows relative to total number of rows based on a field?

- by Arms

I have a scores table that has two fields: user_id score I'm fetching specific rows that match a list of user_id's. How can I determine a rank for each row relative to the total number of rows, based on score? The rows in the result set are not necessarily sequential (the scores will vary widely from one row to the next). I'm not sure if this matters, but user_id is a unique field. Edit @Greelmo I'm already ordering the rows. If I fetch 15 rows, I don't want the rank to be 1-15. I need it to be the position of that row compared against the entire table by the score property. So if I have 200 rows, one row's rank may be 3 and another may be 179 (these are arbitrary #'s for example only). Edit 2 I'm having some luck with this query, but I actually want to avoid ties SELECT s.score , s.created_at , u.name , u.location , u.icon_id , u.photo , (SELECT COUNT(*) + 1 FROM scores WHERE score > s.score) AS rank FROM scores s LEFT JOIN users u ON u.uID = s.user_id ORDER BY s.score DESC , s.created_at DESC LIMIT 15 If two or more rows have the same score, I want the latest one (or earliest - I don't care) to be ranked higher. I tried modifying the subquery with AND id > s.id but that ended up giving me an unexpected result set and different ties.

Read the article

Rails: creating a custom data type, to use with generator classes and a bunch of questions related t

- by Shyam

Hi, After being productive with Rails for some weeks, I learned some tricks and got some experience with the framework. About 10 days ago, I figured out it is possible to build a custom data type for migrations by adding some code in the Table definition. Also, after learning a bit about floating points (and how evil they are) vs integers, the money gem and other possible solutions, I decided I didn't WANT to use the money gem, but instead try to learn more about programming and finding a solution myself. Some suggestions said that I should be using integers, one for the whole numbers and one for the cents. When playing in script/console, I discovered how easy it is to work with calculations and arrays. But, I am talking to much (and the reason I am, is to give some sufficient background). Right now, while playing with the scaffold generator (yes, I use it, because I like they way I can quickly set up a prototype while I am still researching my objectives), I like to use a DRY method. In my opinion, I should build a custom "object", that can hold two variables (Fixnum), one for the whole, one for the cents. In my big dream, I would be able to do the following: script/generate scaffold Cake name:string description:text cost:mycustom Where mycustom should create two integer columns (one for wholes, one for cents). Right now I could do this by doing: script/generate scaffold Cake name:string description:text cost_w:integer cost_c:integer I had also had an idea that would be creating a "cost model", which would hold two columns of integers and create a cost_id column to my scaffold. But wouldn't that be an extra table that would cause some kind of performance penalty? And wouldn't that be defy the purpose of the Cake model in the first place, because the costs are an attribute of individual Cake entries? The reason why I would want to have such a functionality because I am thinking of having multiple "costs" inside my rails application. Thank you for your feedback, comments and answers! I hope my message got through as understandable, my apologies for incorrect grammar or weird sentences as English is not my native language.

Read the article

Using hashing to group similar records

- by Neil Dobson

I work for a fulfillment company and we have to pack and ship many orders from our warehouse to customers. To improve efficiency we would like to group identical orders and pack these in the most optimum way. By identical I mean having the same number of order lines containing the same SKUs and same order quantities. To achieve this I was thinking about hashing each order. We can then group by hash to quickly see which orders are the same. We are moving from an Access database to a PostgreSQL database and we have .NET based systems for data loading and general order processing systems, so we can either do the hashing during the data loading or hand this task over to the DB. My question firstly is should the hashing be managed by DB, possibly using triggers, or should the hash be created on-the-fly using a view or something? And secondly would it be best to calculate a hash for each order line and then to combine these to find an order-level hash for grouping, or should I just use a trigger for all CRUD operations on the order lines table which re-calculates a single hash for the entire order and store the value in the orders table? TIA

Read the article

function binding and the clone() function - Jquery

- by Sam Vloeberghs

Hi I have problems with my keyup binding when cloning an element. Here's the scenario: I have an html markup like this: <tr class="rijbasis"> <td> <input type="text" class="count" /> </td> <td> <span class="cost">10</span> </td> <td> <span class="total">10</span> </td> </tr> I'm binding an keyup function to the input element of my table row like this: $('.rijbasis input').keyup(function(){ var parent = $(this).parent().parent(); $('.total',parent).text(parseInt($('.cost',parent).text()) * parseInt($('.count',parent).val())); } I designed the function like this so I could clone the table row on a onclick event and append it to the tbody: $('.lineadd').click(function(){ $('.contract tbody').append($('.contract tbody tr:last').clone()); $('.contract tbody tr:last input').val("0"); }); This al works , but the keyup function doesnt work on the input elements of the cloned row.. Can anybody help or advice? I hope I was clear enough and I'll be surely adding details if needed to solve this problem. Greetings

Read the article

LinQ XML mapping to a generic type

- by Manuel Navarro

I´m trying to use an external XML file to map the output from a stored procedure into an instance of a class. The problem is that my class is of a generic type: public class MyValue<T> { public T Value { get; set; } } Searching through a lot of blogs an articles I've managed to get this: <?xml version="1.0" encoding="utf-8" ?> <Database Name="" xmlns="http://schemas.microsoft.com/linqtosql/mapping/2007"> <Table Name="MyValue" Member="MyNamespace.MyValue`1" > <Type Name="MyNamespace.MyValue`1"> <Column Name="Category" Member="Value" DbType="VarChar(100)" /> </Type> </Table> <Function Method="GetResourceCategories" Name="myprefix_GetResourceCategories" > <ElementType Name="MyNamespace.MyValue`1"/> </Function> </Database> The MyNamespace.MyValue`1 trick works fine, and the class is recognized. I expect four rows from the stored procedure, and I'm getting four MyValue<string> instances, but the big problem is that the property Value for the all four instances is null. The property is not getting mapped and I don't really get why. Maybe worth noting that the property Value is generic, and that when the mapping is done using attributes it works perfect. Anyone have a clue? BTW the method GetResourceCategories: public ISingleResult<MyValue<string>> GetResourceCategories() { IExecuteResult result = this.ExecuteMethodCall( this, (MethodInfo)MethodInfo.GetCurrentMethod()); return (ISingleResult<MyValue<string>>)result.ReturnValue; }

Read the article

Need help with a SQL CTE Query

- by Chuck

I have a table that I need to get some specific data from for a view. Here's the base table structure with some sample data: | UserID | ReportsToUserID | Org ID | ------------------------------------- | 1 | NULL | 1 | ------------------------------------- | 2 | 1 | 1 | ------------------------------------- | 3 | 2 | 1 | ------------------------------------- | 4 | 3 | 1 | ------------------------------------- The users will be entering reports and users can see the reports of users who report to them and any users who report to those users. Users who report to no one can see everything in their organization Given my sample data above, user 1 can see the reports of 2, 3, & 4; user 2 can see the reports of 3 & 4; and user 3 can see the reports of 4. For the view, I'd like to have the data returned as follows: | UserID | CanSeeUserID | OrgID | -------------------------------------------- | 1 | 2 | 1 | -------------------------------------------- | 1 | 3 | 1 | -------------------------------------------- | 1 | 4 | 1 | -------------------------------------------- | 2 | 3 | 1 | -------------------------------------------- etc... Below is my current code, any help is greatly appreciated. WITH CTEUsers (UserID, CanSeeUserID, OrgID) AS ( SELECT e.ID, e.ReportsToUserID, e.OrgID FROM Users e WITH(NOLOCK) WHERE COALESCE(ReportsToUserID,0) = 0 --ReportsToUserID can be NULL or 0 UNION ALL SELECT e.ReportsToUserID, e.ID,e.OrgID FROM Users e WITH(NOLOCK) JOIN CTEUsers c ON e.ID = c.UserID ) SELECT * FROM CTEUsers

Read the article

INSERT stored procedure does not work?

- by vikitor

Hello, I'm trying to make an insertion from one database called suspension to the table called Notification in the ANimals database. My stored procedure is this: ALTER PROCEDURE [dbo].[spCreateNotification] -- Add the parameters for the stored procedure here @notRecID int, @notName nvarchar(50), @notRecStatus nvarchar(1), @notAdded smalldatetime, @notByWho int AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; -- Insert statements for procedure here INSERT INTO Animals.dbo.Notification values (@notRecID, @notName, @notRecStatus, null, @notAdded, @notByWho); END The null inserting is to replenish one column that otherwise will not be filled, I've tried different ways, like using also the names for the columns after the name of the table and then only indicate in values the fields I've got. I know it is not a problem of the stored procedure because I executed it from the sql server management studio and it works introducing the parameters. Then I guess the problem must be in the repository when I call the stored procedure: public void createNotification(Notification not) { try { DB.spCreateNotification(not.NotRecID, not.NotName, not.NotRecStatus, (DateTime)not.NotAdded, (int)not.NotByWho); } catch { return; } } It does not record the value in the database. I've been debugging and getting mad about this, because it works when I execute it manually, but not when I automatize the proccess in my application. Does anyone see anything wrong with my code? Thank you

Read the article

What is an elegant way to solve this max and min problem in Ruby or Python?

- by ????

The following can be done by step by step, somewhat clumsy way, but I wonder if there are elegant method to do it. There is a page: http://www.mariowiki.com/Mario_Kart_Wii, where there are 2 tables... there is Mario - 6 2 2 3 - - Luigi 2 6 - - - - - Diddy Kong - - 3 - 3 - 5 [...] The name "Mario", etc are the Mario Kart Wii character names. The numbers are for bonus points for: Speed Weight Acceleration Handling Drift Off-Road Mini-Turbo and then there is table 2 Standard Bike S 39 21 51 51 54 43 48 Out Bullet Bike 53 24 32 35 67 29 67 In Bubble Bike / Jet Bubble 48 27 40 40 45 35 37 In [...] These are also the characteristics for the Bike or Kart. I wonder what's the most elegant solution for finding all the maximum combinations of Speed, Weight, Acceleration, etc, and also for the minimum, either by directly using the HTML on that page or copy and pasting the numbers into a text file. Actually, in that character table, Mario to Bower Jr are all medium characters, Baby Mario to Dry Bones are small characters, and the rest are all big characters, except the small, medium, or large Mii are just as what the name says. Small characters can only ride small bike or small kart, and so forth for medium and large.

Read the article

entity framework vNext wish list

- by Fred Yang

I have been intensively studying and use ef4 in my project. I do feel the improvement that it has over version 1. But I found that I have something I cannot get around easily. Here is a list I want it to be better in ef vNext. the model designer should allow multiple view of the same model, so that I don't need cram all my entity into a single view. respect user's manual edit of edmx. Currently, the some database view object simply can not be imported to the model because the designer "smartly" think that the view does not have a primary key, so that I have to manually edit the edmx to correct designer's behavior. But in the next "update from database" task, designer will revert my customization. For now, I simply fallback to manually edit the edmx file at all, or I have to use compare tool to keep the new update, and rollback and put the new update into my old edmx file manually. Designer should be improved to allow default behavior and user's manual control. I want control not to let the designer refresh the change of imported object. support user defined table function. linq is about Composability, stored proc dos not support composability. I wish I could use user defined table function which support this. What are you wishes for EF vNext?

Read the article

How to setup relationships in contact Database

- by Walt

I am currently embarking on a new venture to learn PHP and MySQL. I have done some simple databases in the past using Access, but this one is to be a web-centric database for tracking a myriad of data including contacts and project information. I will need to link the various tables in various relationships, and I am not sure the best way to do that. Since I am just starting out with PHP/MySQL I am researching online sources for learning as much as possible. If anyone has recommendations on books or websites, I would appreciate it. In setting up my tables, one major area that I am concerned with is contacts. I will have a variety of contacts that include: employees, clients, vendors, subcontractors, etc.. and a single contact can be multiple types and each type would have various additional fields that pertain to them. My thought was to have one contacts table that links to other tables for the various contact types. I'm not sure which field type or setup of table options are best... Thoughts? This scenario will likely play out in other areas of the database as well for projects and products. Any pointers/direction would be appreciated. WES

Read the article

Using jQuery with Windows 8 Metro JavaScript App causes security error

- by patridge

Since it sounded like jQuery was an option for Metro JavaScript apps, I was starting to look forward to Windows 8 dev. I installed Visual Studio 2012 Express RC and started a new project (both empty and grid templates have the same problem). I made a local copy of jQuery 1.7.2 and added it as a script reference.  <link href="/css/default.css" rel="stylesheet" /> <script src="/js/jquery-1.7.2.js"></script> <script src="/js/default.js"></script> Unfortunately, as soon as I ran the resulting app it tosses out a console error: HTML1701: Unable to add dynamic content ' a' A script attempted to inject dynamic content, or elements previously modified dynamically, that might be unsafe. For example, using the innerHTML property to add script or malformed HTML will generate this exception. Use the toStaticHTML method to filter dynamic content, or explicitly create elements and attributes with a method such as createElement. For more information, see http://go.microsoft.com/fwlink/?LinkID=247104. I slapped a breakpoint in a non-minified version of jQuery and found the offending line: div.innerHTML = " <link/><table></table><a href='/a' style='top:1px;float:left;opacity:.55;'>a</a><input type='checkbox'/>"; Apparently, the security model for Metro apps forbids creating elements this way. This error doesn't cause any immediate issues for the user, but given its location, I am worried it will cause capability-discovery tests in jQuery to fail that shouldn't. I definitely want jQuery $.Deferred for making just about everything easier. I would prefer to be able to use the selector engine and event handling systems, but I would live without them if I had to. How does one get the latest jQuery to play nicely with Metro development?

Search Results

Search found 25022 results on 1001 pages for 'lua table'.

Page 551/1001 | < Previous Page | 547 548 549 550 551 552 553 554 555 556 557 558 | Next Page >

- by Wardy

- by kOhm

- by oskarae

- by Antonio de la Peña

- by Bipul

- by Eef

- by user1455103

- by MBTHQ

- by Lee

- by Greg

- by Manuel Darveau

- by btollett

- by user207788

- by Daniel Abrahamsson

- by Arms

- by Shyam

- by Neil Dobson

- by Sam Vloeberghs

- by Manuel Navarro

- by Chuck

- by vikitor

- by ????

- by Fred Yang

- by Walt

- by patridge

< Previous Page | 547 548 549 550 551 552 553 554 555 556 557 558 | Next Page >