Search Results

Search found 59194 results on 2368 pages for 'depth first search'.

Page 558/2368 | < Previous Page | 554 555 556 557 558 559 560 561 562 563 564 565  | Next Page >

  • Workstations cannot see new MS Server 2008 domain, but can access DHCP. (solved)

    - by Radix
    The XP Pro workstations do not see the new replacement domain upon boot; they only see their cached entry for the old (server 2003) domain controller. The old_server is not connected to the network. I have DHCP working with the same scope as the old_server. In my "before-asking" search for a solution I came across the following two articles, and I recall doing things as suggested by the articles. http://www.windowsreference.com/windows-server-2008/how-to-setup-dhcp-server-in-windows-server-2008-step-by-step-guide/ http://www.windowsreference.com/windows-server-2008/step-by-step-guide-for-windows-server-2008-domain-controller-and-dns-server-setup/ The only possible issue is: I was under the impression that the domain netbios needed to match the DC's netbios. The DC netbios is city01 while the domain's FQDN is city.domain.org (I think this is mistaken and should have been just domain.org) But, the second link led me to a post which I believe answers my question. I did as they instructed by opening Local Area Connection Properties, then selecting TCP/IPv4 and setting the sole preferred DNS server to the local hosts static IP (10.10.1.1). Search for "Your problems should clear up" for the post I'm referencing: http://forums.techarena.in/active-directory/1032797.htm Have I misunderstood their instructions? I am hoping to reach the point where I can define users and user groups. Also, does TechNet have a single theoretical overview document I could read. I really don't like treating comps as magic. I will be watching this closely and will quickly answer any questions. If I've left anything out it is because I did not know it was needed. PS: I am loath to ask obviously basic questions, but I am tired and wish to fix this before tomorrow. Also, this is my first server installation, thank you for your help.

    Read the article

  • Vlookup to retrieve an ID from table using text match

    - by Federico Giust
    I've got an excel spreadsheet where I would normally use a VLOOKUP. In this case I need to find the ID of the record when comparing email addresses, so the email address is the unique id here. For example on sheet 1 A B C D Person Id | Family Name | First Name | Email #N/A | Doe | John | [email protected] On Sheet 2 A B C D Person Id | Family Name | First Name | Email 12345 | Doe | John | [email protected] Basically on sheet 1 I've got 800 records, on sheet 2 450. I know the 450 are in Sheet 1, so I need to find the ids of those, and put them on sheet 1 where I've got lots more data for each person. What I've tried so far is a VLOOKUP, but I keep getting an error. I'd like to do it with some sort of formula and not using any copy paste and remove duplicates. Any ideas?

    Read the article

  • Why Ubuntu could treat hosts file so strange?

    - by z4y4ts
    I have almost fresh Ubuntu desktop box. OS was installed two weeks ago and updated from karmic repositories. Last week I had no problems with DNS. But this week something had changed. I'm not sure what and when, and not sure whether I changed any configs. So now I have some really weird situation. According to logs name resolving should work normally. /etc/hosts 127.0.0.1 localhost test 127.0.1.1 desktop /etc/host.conf order hosts,bind multi on /etc/resolv.conf # Generated by NetworkManager search search servers obtained via DHCP nameserver 192.168.0.3 /etc/nsswitch.conf passwd: compat group: compat shadow: compat hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis But if fact it is not. user@test ~ping test PING localhost (127.0.0.1) 56(84) bytes of data. [skip] Pinging is ok. user@test ~host test test.myviacube.com has address xx.xxx.161.201 But pure I suspect that NetworkManager might cause this misbehavior, but don't know where to start to check it. Any thoughts, suggestions?

    Read the article

  • Keeping my zsh or bash profile synced up on all my machines.

    - by Joseph Silvashy
    I work on several different machines, all of which are *nix. I have a lot of specific things I like my shell to, or the prompt to look like, or aliases, etc, etc. I'm sure all of you folks deal with this as well. What do you think the best way to keep all my machines' shells to act the same? First off, I'm aware that different machines will need different paths to bins and other differences, so my first inclination is to just include a file at the end of my profile, this is the one that we'll keep in sync. What is the best way to keep files synced up? I can put the file on a remote system, and perhaps use git, to push, then pull my changes every once and a while. However, isn't Rsync better suited for this?

    Read the article

  • Destroyed user account on OS X with dscl; how to restore? [migrated]

    - by Sam Ritchie
    I was trying to create a new user on my OS X Lion machine, and somehow managed to destroy my own user's account. Here are the steps I took; hopefully someone here can recognize what I did, and maybe identify some way around this. First, I ran these commands: sudo dscl localhost -create /Local/Default/Users/elasticsearch sudo dscl localhost -create /Local/Default/Users/elasticsearch /bin/bash # mistake! sudo dscl localhost -create /Local/Default/Users/elasticsearch UserShell /bin/bash sudo dscl localhost -create /Local/Default/Users/elasticsearch RealName "Elastic Search" sudo dscl localhost -create /Local/Default/Users/elasticsearch UniqueID 503 # MY uniqueID sudo dscl localhost -create /Local/Default/Users/elasticsearch PrimaryGroupID 1000 sudo dscl localhost -create /Local/Default/Users/elasticsearch NFSHomeDirectory /Local/Users/elasticsearch The big mistake I made here was using "503", which was my user's UniqueID. Immediately my shell username changed to "elasticsearch". I fiddled around, tried to change the current user with sudo su -u sritchie, but this didn't work. On restart, only the "Elastic Search" user was available. I logged into the Lion Recovery partition and reset the root password. After logging in as root and checking on the terminal, I made the remarkable discovery that my home folder was totally empty. I deleted the elasticsearch user, but it made no difference. I don't see anything in Deleted Users either. The odd thing is that when I log in now as myself (sritchie) I can see desktop icons with previews. I can even open a few text files from the Downloads folder if I use the dock alias to Downloads. Could this data be hiding somewhere? Any help would be REALLY appreciated! Thanks, Sam

    Read the article

  • UAC prompt won't allow non-administrator to access IIS 7 Manager.

    - by Triynko
    The IIS 7 Manager seems to throw up a UAC prompt requiring administrative elevation as soon as the shortcut is clicked. This makes it impossible for a non-admin to use it. When I first created the user account, I could open IIS 7 Manager, but could not connect. I temporarily made the user account an Admin, then opened IIS 7 Manager again. Now that I've removed user from Admin, every time I open IIS 7 Manager it throws up the UAC prompt, making it impossible to do anything with it as a non-Admin. Is this a bug? Is there a way to reset the settings for this user so that IIS 7 Manager is back in some kind of first-run state?

    Read the article

  • change owner/uid of mount point upon mount

    - by Shiplu
    The scenario is like this. Bob has a computer. It crashed. Now he only has the hdd. The hdd is in ext3 format. He go to his office and told the sys admin John to mount this hdd and put the mount point in his home directory. John used the following fstab entries. # Bobs harddisk /media/TAPE4/Bobs-hdd.img /home/bob/myhdd/windows ntfs ro,loop,offset=32256 0 0 /media/TAPE4/Bobs-hdd.img /home/bob/myhdd/linux ext3 ro,loop,offset=14048810496 0 0 /media/TAPE4/Bobs-hdd.img /home/bob/myhdd/extra ntfs ro,loop,offset=28015335936 0 0 Bob was happy. He could access his old extra and windows. Specially the Documents and Settings in windows was helpful for him. But he found a problem. He is a web developer and all his websites are in linux/home/bob/public_html directory. When he tried to access that public_html directory he got permission_denied. He executed ls -lh he saw this. drwxr-xr-x 2 john john 4.0K Nov 9 2011 Desktop drwxr-xr-x 3 john john 4.0K Aug 12 2011 Documents drwxr-xr-x 3 john john 4.0K Aug 21 2011 public_html He contacted John thinking he might be mistakenly did this. But John couldn't find a way why this happend? Then one thing came into his mind file system hardly store username. They store uids. So he executed ls -ln drwxr-xr-x 2 1000 1000 4096 Nov 9 2011 Desktop drwxr-xr-x 3 1000 1000 4096 Aug 12 2011 Documents drwxr-xr-x 3 1000 1000 4096 Aug 21 2011 public_html John thinks 1000 is the first uid on a linux system. As he is the admin of the current system. He created his account first. so Johns uid was 1000. Bob also setup his private system and crated his account first. So Bobs uid was 1000 too. So thats an expected behavior. But problem remains. How can Bob access those websites in public_html?

    Read the article

  • Texture and Pattern Generator

    - by Ara
    I use Adobe Fireworks for its Texture and Pattern tools to make things like this: http://i.imgur.com/sci7Roc.png and then i copy-paste it to Flash Professional (Adobe) to use there. but fireworks is so slow and buggy is there a free or commercial software to do this simple Texture / Pattern thing easily? Texture (like the second image above) Patter and Texture (like the first one) Transparent Texture, so the background color would be visible instead of the white lines in second image The ability to copy and paste it (as PNG 32 or any alpha transparent image) so i don't have to save it first and then import it to flash * I Use Mac OS X 10.8.4 *

    Read the article

  • Logging into Local Statusnet instance on Apache causes browser to download a file

    - by DilbertDave
    I've installed statusnet 0.9.1 on a Windows Server via the WAMP stack and on the whole it seems to be fine. However, when logging in using IE7 or Chrome the browers invoke a file download, i.e. the File Download dialog is displayed. In IE7 the file is called notice with the content below (some parts starred out): <?xml version="1.0" encoding="UTF-8"?> <OpenSearchDescription xmlns="http://a9.com/-/spec/opensearch/1.1/"> <ShortName>Mumble Notice Search</ShortName> <Contact>david.carson@*****.com</Contact> <Url type="text/html" method="get" template="http://voice.*****.com/mumble/search/notice?q={searchTerms}"></Url> <Image height="16" width="16" type="image/vnd.microsoft.icon">http://voice.*****.com/mumble/favicon.ico</Image> <Image height="50" width="50" type="image/png">http://voice.******.com/mumble/theme/cloudy/logo.png</Image> <AdultContent>false</AdultContent> <Language>en_GB</Language> <OutputEncoding>UTF-8</OutputEncoding> <InputEncoding>UTF-8</InputEncoding> </OpenSearchDescription> In Chrome (Linux and Windows!) the file is called people and contains similar XML. This is not an issue when logging in using FireFox. This is obviously a configuration issue but I'm not having much luck tracking it down. I tested the previous version of Statusnet on an Ubuntu Server VM on our network and it worked fine for months. Thanks In Advance

    Read the article

  • How to recursively move all files (including hidden) in a subfolder into a parent folder in *nix?

    - by deadprogrammer
    This is a bit of an embracing question, but I have to admit that this late in my career I still have questions about the mv command. I frequently have this problem: I need to move all files recursively up one level. Let's say I have folder foo, and a folder bar inside it. Bar has a mess of files and folders, including dot files and folders. How do I move everything in bar to the foo level? If foo is empty, I simply move bar one level above, delete foo and rename bar into foo. Part of the problem is that I can't figure out what mv's wildcard for "everything including dots" is. A part of this question is this - is there an in-depth discussion of the wildcards that cp and mv commands use somewhere (googling this only brings very basic tutorials).

    Read the article

  • Assign PowerShell script to run at startup using PowerShell on Window Server 2012

    - by James Toyer
    I'm trying to write a PowerShell script that will run when a Windows 2012 instance is created on AWS using the configuration tools provided by AWS. My problem is that I want to change the name of the machine once it has started up, restart the machine and carry on set up process after. The main reason for this is that one of the applications, Boundary, installed in the set up process takes the name of the server when first installed. It is then doesn't seem possible to change it's name in their portal. Ideally I would have two PowerShell scripts, one to start the set up process, initialised through AWS and another that runs the first time the machine restarts. This second script would ideally be queued to run on the next start by the initial set up script. So I guess my question are: Is this possible? How would I go about doing this. My Google foo is letting me down here so any answers would be appreciated.

    Read the article

  • syntax error: unknown user 'munin' in statoverride file

    - by John
    Server running Ubuntu 12.04 lts I installed munin the other day on a server. I decided later to remove it with apt-get. I noticed that not everything was removed from the installation so manually removed the munin web directory and also removed the munin user-name and group from the sever. However I have just now tried to run apt-get upgrade which is now returning an error: dpkg: unrecoverable fatal error, aborting: syntax error: unknown user 'munin' in statoverride file E: Sub-process /usr/bin/dpkg returned an error code (2) I am now out of my depth. What does this mean? Google results have not really been helpful. Can anyone help? Thanks, John

    Read the article

  • Input not supported message when monitor is powered off then back on

    - by Jason Down
    I've been getting a message on my monitor where "Input not supported" is floating around. This only happens when I manually turn the monitor off and then later turn it back on. Leaving the monitor on and allowing it to go to the screen saver doesn't seem to cause the issue (but I prefer to turn the monitor off if I'm going to be away from the computer for any length of time). Any ideas what might cause this, only when the monitor is turned off manually? Specs: Acer X203w mointor Radeon 9600 Pro Video card Linux Mint 8 Resolution 1680 x 1050 (16:10 - Preferred native resolution for the monitor) Refresh Rate 60hz Here is what is in my xorg.conf file: Section "Device" Identifier "Radeon 9600" Driver "ati" BusID "PCI:1:0:0" Option "XAANoOffscreenPixmaps" Option "AccelMethod" "XAA" EndSection Section "Screen" Identifier "Default Screen" Device "Radeon 9600" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1680x1050" "1440x900" "1024x768" EndSubSection EndSection Section "DRI" Mode 0666 EndSection Section "Extensions" Option "Composite" "Enable" EndSection

    Read the article

  • recursive grep started at / hangs

    - by Martin
    I have used following grep search pattern on multiple platforms: grep -r -I -D skip 'string_to_match' / For example on FreeBSD 8.0, FreeBSD 6.4 and Debian 6.0(squeeze). Command does a recursive search starting from root directory, assumes that binary files do not have the 'string_to_match' and skips devices, sockets and named pipes. FreeBSD 8.0 and FreeBSD 6.4 use GNU grep version 2.5.1 and Debian 6.0 uses GNU grep version 2.6.3. On FreeBSD 6.4, last information printed to stderr was "grep: /dev/cuad0: Device busy". After this grep just idles as according to "top -m io -o total" the I/O usage of grep is nonexistent. Same behavior is true under FreeBSD 8.0, but last information sent to stderr is "grep: /tmp/.wine-0: Permission denied" on my installation. In case of Debian, last output to stderr is "grep: /proc/sysrq-trigger: Input/output error". If I check the I/O usage of grep process under Debian, it is following: root@Debian:~# iotop -bp 22439 Total DISK READ: 0.00 B/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 22439 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % grep -r -I -D skip 10.10.10.99 / Total DISK READ: 0.00 B/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 22439 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % grep -r -I -D skip 10.10.10.99 / Total DISK READ: 0.00 B/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 22439 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % grep -r -I -D skip 10.10.10.99 / ^Croot@Debian:~# What might cause this? Is there a way to view which file grep is currently processing in case lsof is not present? I'm able to use lsof under Debian and looks like the problematic file name there is "0xc6b2c230 file struct, ty=0, op=0xc0d34120". I'm not sure what this is.. I'm not able to use lsof or fstat under FreeBSD. PS: I know I could use find utility, but this is not the question.

    Read the article

  • wbadmin incremental system state backup

    - by user74513
    I am doing system state backups on a Windows Server 2008 R2 Enterprise (Service Pack 1) machine and expected the backups after the first one to be incremental. However with each backup a new directory with vhd files are created and the vhd files are almost the same size as the with the first backup. So the backups does not seem to be incremental. I used the following command to do the backup: wbadmin start systemstatebackup -backupTarget:f: I played around with the settings under "Configure Performance Settings" in the Windows Server Backup plugin in Server Manager but according to the description at the top of the dialog these settings are not applied to system state backups. Are there any settings available for wbadmin system state backup to make the backups incremental?

    Read the article

  • Get sessions' remote IP from Teamviewer log file

    - by etuardu
    I'd like to know who has logged in to my machine and when. I have two TeamViewer log files: Connections_incoming.txt and TeamViewer7_Logfile.log. The first one is quite plain and lists, as its name says, the incoming connections to the machine, reporting the local name of the remote host, login time, logout time, and some ids. e.g.: 173274362 MYLAPTOP 20-02-2012 17:32:16 20-02-2012 17:50:42 Master RemoteControl {C5AAE483-ED0B-54B8-9235-7AE597CAD342} This is almost all what I need, but unfortunately no remote IP address is reported here, so I checked for IPs in TeamViewer7_Logfile.log but it is really messy. It indeed contains some IP addresses but I can't understand which one is bound with the items in the first log file. Is there a way to interpolate the two logs to get what I need? Should I search the second file for some particular text? What do you suggest?

    Read the article

  • Missing startup screens and slow bootup/login after using WinClone to expand Bootcamp partition

    - by user26453
    I used WinClone to backup my Bootcamp partition, which was a Windows 7 Ultimate install, on my late 2006 Macbook Pro. I desired to expand the Bootcamp partition's size. It worked reasonably well with some hiccups along the way and some remaining issues. First issue I ran into was the Bootcamp Assistant utility - it would not recreate the partition. This was due to a lack of contiguous space that is required for the Bootcamp partition. As a result I wiped the whole drive and reinstalled Snow Leopard, did the minimum amount of system updates, and created and formated a new Bootcamp partition. WinClone restored the image without complaint and the image was automatically resized to the new partition's size. Second issue I ran into was after the first boot into Windows. The first thing I noticed was that instead of the newer "slick" startup screen (4 colors wisping around, a Windows 7 title), there was more of an old school style startup screen (a progress bar with block increments, yellow/greenish color, nothing else really). The initial bootup to a login screen was slow, perhaps as Windows dealt with the partition changes. After logging in, the screen goes blank and the computer seems to hang for a minute, before completing the login. After subsequent restarts, the slick screen is still missing, boot to login screen is normal, but the time from login to desktop active is still very slow. As a side note, this behavior of a long time from login to the desktop finally loaded I've previously only seen when the computer would try to hibernate and fail (battery is really bad). On the next startup, I would see this behavior, but not subsequently. So a potential cause: I imaged the partition after hibernating out of Windows. From reading some posts/guides on the subject, this was not recommended, and perhaps shouldn't even have worked? Could the partition be stuck in some weird mode as a result that makes the boot issues appear? I've attempted to disable hibernation and restart, trying to delete the .sys file that hibernation uses. Other fixes I'm thinking of attempting are booting a Win7 disc and repairing the install/partition. I can't shake the nagging feeling something isn't right as a result of the modified boot screens and the slow login process.

    Read the article

  • Continued title numbering

    - by mrg
    Let's assume we have a small Word document containing: First Title On Level A Lorem ipsum .. Title On Level B Lorem ipsum .. Second Title On Level A Lorem ipsum .. What I would like to achive is the following: 1. First Title On Level A Lorem ipsum .. 1.1 Title On Level B Lorem ipsum .. 2. Second Title On Level A Lorem ipsum .. I can't set this up by simply adding numbering to the title styles, because that only adds one number to the title without support for the x.y number format.

    Read the article

  • Software: Launching League of Legends spectator mode from Command Line (Mac)

    - by Alex Popov
    Background: tl;dr at the end League of Legends has a spectator mode, in which you can watch someone else's game (essentially a replay) with a 3 minute delay. Popular LoL website OP.GG has figured out a clever way of hosting these spectator games on their own servers, thereby making them replayable, as opposed to only being available while the game is on (as Riot does it). If you request a replay from OP.GG, it sends a batch file which looks for where the League is situated and then the magic happens: @start "" "League of Legends.exe" "8394" "LoLLauncher.exe" "" "spectator fspectate.op.gg:4081 tjJbtRLQ/HMV7HuAxWV0XsXoRB4OmFBr 1391881421 NA1" This works fine on Windows. I'm trying to get it to work on Mac (which has an official client). First I tried running the same command by hand, (split for convenience) /Applications/ ... /LeagueOfLegends.app/ ... /LeagueofLegends 8393 LoLLauncher \ /Applications/ ... /LolClient spectator fspectate.op.gg:4081 tjJbtRLQ/HMV7HuAxWV0XsXoRB4OmFBr 1391881421 NA1 Running this, however, just starts the LoLLauncher, which closes all the active League processes. The exactly same thing happens if I just call /Applications/ ... /LeagueOfLegends.app/ ... /LeagueofLegends Next I tried seeing what actually happens when Spectator mode is initiated so I ran $ ps -axf | grep -i lol which showed UID PID PPID C STIME TTY TIME CMD 503 3085 1 0 Wed02pm ?? 0:00.00 (LolClient) 503 24607 1 0 9:19am ?? 0:00.98 /Applications/League of Legends.app/Contents/LOL/RADS/system/UserKernel.app/Contents/MacOS/UserKernel updateandrun lol_launcher LoLLauncher.app 503 24610 24607 0 9:19am ?? 1:08.76 /Applications/League of Legends.app/Contents/LoL/RADS/projects/lol_launcher/releases/0.0.0.122/deploy/LoLLauncher.app/Contents/MacOS/LoLLauncher 503 24611 24610 0 9:19am ?? 1:23.02 /Applications/League of Legends.app/Contents/LoL/RADS/projects/lol_air_client/releases/0.0.0.127/deploy/bin/LolClient -runtime .\ -nodebug META-INF\AIR\application.xml .\ -- 8393 503 24927 24610 0 9:44am ?? 0:03.37 /Applications/League of Legends.app/Contents/LoL/RADS/solutions/lol_game_client_sln/releases/0.0.0.117/deploy/LeagueOfLegends.app/Contents/MacOS/LeagueofLegends 8394 LoLLauncher /Applications/League of Legends.app/Contents/LoL/RADS/projects/lol_air_client/releases/0.0.0.127/deploy/bin/LolClient spectator 216.133.234.17:8088 Yn1oMX/n3LpXNebibzUa1i3Z+s2HV0ul 1400781241 NA1 Of Interest: there is (LolClient) which I cannot kill by it's PID. UserKernel updateandrun lol_launcher LoLLauncher.app is launched first. LoLLauncher is launched by the UserKernel (as we can see from the PPID) The very long command (PID: 24927) is how Spectator mode is launched, and is also launched by UserKernel. Spectator mode is launched in exactly the same way that the OP.GG .bat wanted to, with the only difference that Spectator mode connects to Riot instead of OP.GG's spectate server. I tried attaching GDB to the LolClient, but I couldn't get anything meaningful from it since it's an Adobe AIR application (and I've never used GDB with code other than mine own). Next I ran dtruss -a -b 100m -f -p $PID on everything I could think of: the LolClient, the LolLauncher and the UserKernel and skimmed the half a million lines produced. I found stuff like the GET request used to get the information of the game to spectate, but I could not see any launch of the equivalent of League of Legends.exe with spectator options. Finally, I ran lsof | grep -i lol to see if anything else was opened in the process, but didn't find anything that seemed appropriate. Open were UserKernel, LolLauncher, LolClient, Adobe AIR, LeagueofLegends and then Bugsplat, all of which are expected. None of this seemed especially relevant to figuring out how LeagueofLegends was opened into spectator mode. It obviously can be done, since Spectator mode is accessible from within the client. It seems likely that it can be done from the CLI, since Windows can do it and the clients are supposed to equals. Unless I'm missing something in the difference between how UNIX and Windows handle CLI application launches. My question is if there are any other things I can try to figure out how to launch Spectator mode myself. tl;dr: Trying to get into spectator mode from the CLI. It's possible on Windows (see first code block) but it just restarts League on Mac. What else can I try to find what call is made, and how to reproduce it? PS: Please let me know how I can improve this question or its formatting, I'd love to use StackOverflow/SuperUser, but as the guys said on the podcast this week (Ep. 59) it's very intimidating. Sorry for posting this on StackOverflow the first time :(

    Read the article

  • Remotely from Chrome or IE page loads ~60seconds, from Firefox or IE on local machine - instantly.

    - by Janis Veinbergs
    The problem: If i access SharePoint from Windows 7 with IE8 or Chrome5 - I must wait for like a minute to get a response. If i use other Windows 7 with IE8, just the same - just wait a MINUTE. If i use Firefox3.6 on W7 machine - page opens up instantly. Now switch to IE rendering engine in Firefox, you will have to wait just as with IE. Now i tried IE8 on XP SP3 - page opens up instantly. I tried IE8 on Windows Server 2003 SP2 (machine on which SharePoint is hosted) - page opens up instantly. IIS6 Logs I did request almost instantly from all 3 browsers and this is what shows up in IIS logs (first 2 entries for each browser): Chrome Ok, IIS saw first Chrome request when i Hit enter in browser, but i had to wait long for things to move on 2010-06-01 05:46:04 W3SVC1794621940 192.168.0.9 GET /sapulces - 80 - 192.168.0.186 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/533.4+(KHTML,+like+Gecko)+Chrome/5.0.375.55+Safari/533.4 401 2 2148074254 Loading... 2010-06-01 05:47:07 W3SVC1794621940 192.168.0.9 GET /sapulces - 80 - 192.168.0.186 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/533.4+(KHTML,+like+Gecko)+Chrome/5.0.375.55+Safari/533.4 401 1 0 ... etc... Firefox All Instantly 2010-06-01 05:46:06 W3SVC1794621940 192.168.0.9 GET /sapulces - 80 - 192.168.0.186 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+lv;+rv:1.9.2.3)+Gecko/20100401+Firefox/3.6.3 401 2 2148074254 2010-06-01 05:46:06 W3SVC1794621940 192.168.0.9 GET /sapulces - 80 - 192.168.0.186 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+lv;+rv:1.9.2.3)+Gecko/20100401+Firefox/3.6.3 401 1 0 ... etc... IE I did hit enter when it was 05:46:06, but these are first entries in IIS logs 2010-06-01 05:47:08 W3SVC1794621940 192.168.0.9 GET /sapulces - 80 - 192.168.0.186 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.1;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0;+Tablet+PC+2.0;+.NET+CLR+1.1.4322;+.NET4.0C;+.NET4.0E) 401 1 0 2010-06-01 05:47:08 W3SVC1794621940 192.168.0.9 GET /sapulces - 80 - 192.168.0.186 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.1;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0;+Tablet+PC+2.0;+.NET+CLR+1.1.4322;+.NET4.0C;+.NET4.0E) 401 1 0 ... etc... Nothing to see in Event Logs. The question Similar question has been asked but there is no response and i`m trying to access page without SSL and that happens even on GET requests. Where do I look? Where would be the problem? Browser? OS? I don't even know what to think about. Just a note Just a note about chrome's process isolation: I found it sad that while I was waiting that minute with Chrome, i could not use any other tab (i could switch, but i could not, for example, scroll or use any controls)

    Read the article

  • hardware addressing and configurable addressing scheme

    - by Zia ur Rahman
    basically i want to ask question about configurable addressing scheme for LAN interface hardware. i have read about it from a book, some main points are given by a configurable addressing scheme provides a mechanism that a customer can use to set a physical address.The mechanism can be manual (the switches that must be set when the interface is first installed).or an electronic memory such as an EPROM that can be downloded from the computer(what does this means). Most hardware needs to be configured only once- configuration is usually done when the hardware is first installed. Question:Suppose a network administrator configures the LAN interface hardware (assigns the address) when he installs it. Now later on if he needs to change the physical address of the device can he change it? Or in this addressing scheme the hardware can only be configured once and we can not reconfigure it later on.

    Read the article

  • Combine drivers from multiple Win7 installs to single image

    - by MikeyB
    I need to prepare a Windows 7 image with drivers for multiple systems (Lenovo laptops). I currently have an image prepared on one laptop type but need to grab the drivers appropriate for the other laptop types as well to ensure that it works on all systems. From what I can tell, the procedure will be: create a boot CD with imageX take a .wim image prepared on the first type of systems take .wim images from the other systems mount the other images in WAIK extract the drivers from the other images inject the drivers into the first .wim boot a system with the boot CD and redeploy the updated .wim image into the Windows partition take an image of the drive with usual imaging tools This all seems a little too convoluted, but I'm willing to do it to get the proper drivers into the image. This is (seemingly) necessarily complicated by having more than one OS on the disk image. Am I on the right track?

    Read the article

  • Tool to Save a Range of Disk Clusters to a File

    - by Synetech inc.
    Hi, Yesterday I deleted a (fragmented) archive file only to find that it did not extract correctly, so I was left stranded. Fortunately there was not much space free on the drive, so most of the space marked as free was from the now-deleted archive. I pulled up a disk editor and—painfully—managed to get a list of cluster ranges from the FAT that were marked as unused. My task then was to save these ranges of clusters to files so that I could examine them to try to determine which parts were from the archive and recombine them to attempt to restore the deleted file. This turned out to be a huge pain in the butt because the disk editor did not have the ability to select a range of clusters, so I had to navigate to the start of each cluster and hold down Ctrl+Shift+PgDn until I reached the end of the range (which usually took forever!) I did a quick Google search to see if I could find a command-line tool (preferably with Windows and DOS versions) that would allow me to issue a commands such as: SAVESECT -c 0xBEEF 0xCAFE FOO.BAR ::save clusters 0xBEEF-0xCAFE to FOO.BAR SAVESECT -s 1111 9876 BAZ.BIN ::save sectors 1111-9876 to BAZ.BIN Sadly my search came up empty. Any ideas? Thanks!

    Read the article

< Previous Page | 554 555 556 557 558 559 560 561 562 563 564 565  | Next Page >