Search Results

Search found 25952 results on 1039 pages for 'development lifecycle'.

Page 560/1039 | < Previous Page | 556 557 558 559 560 561 562 563 564 565 566 567  | Next Page >

• Physics Engine [Collision Response, 2-dimensional] experts, help!! My stack is unstable!

  - by Register Sole

  Previously, I struggle with the sequential impulse-based method I developed. Thanks to jedediah referring me to this paper, I managed to rebuild the codes and implement the simultaneous impulse based method with Projected-Gauss-Seidel (PGS) iterative solver as described by Erin Catto (mentioned in the reference of the paper as [Catt05]). So here's how it currently is: The simulation handles 2-dimensional rotating convex polygons. Detection is using separating-axis test, with a SKIN, meaning closest points between two polygons is detected and determined if their distance is less than SKIN. To resolve collision, simultaneous impulse-based method is used. It is solved using iterative solver (PGS-solver) as in Erin Catto's paper. Error-correction is implemented using Baumgarte's stabilization (you can refer to either paper for this) using J V = beta/dt*overlap, J is the Jacobian for the constraints, V the matrix containing the velocities of the bodies, beta an error-correction parameter that is better be < 1, dt the time-step taken by the engine, and overlap, the overlap between the bodies (true overlap, so SKIN is ignored). However, it is still less stable than I expected :s I tried to stack hexagons (or squares, doesn't really matter), and even with only 4 to 5 of them, they hardly stand still! Also note that I am not looking for a sleeping scheme. But I would settle if you have any explicit scheme to handle resting contacts. That said, I would be more than happy if you have a way of treating it generally (as continuous collision, instead of explicitly as a special state). Ideas I have: I would try adding a damping term (proportional to velocity) to the Baumgarte. Is this a good idea in general? If not I would not want to waste my time trying to tune the parameter hoping it magically works. Ideas I have tried: Using simultaneous position based error correction as described in the paper in section 5.3.2, turned out to be worse than the current scheme. If you want to know the parameters I used: Hexagons, side 50 (pixels) gravity 2400 (pixels/sec^2) time-step 1/60 (sec) beta 0.1 restitution 0 to 0.2 coeff. of friction 0.2 PGS iteration 10 initial separation 10 (pixels) mass 1 (unit is irrelevant for now, i modified velocity directly<-impulse method) inertia 1/1000 Thanks in advance! I really appreciate any help from you guys!! :)

  Read the article

• How to disguise a serverside mob as another?

  - by Shaun Wild

  I've been working a Minecraft sever mod and i want to be able to add a new entity to the server, but then make the server send the packets to the client, imitating another mob, for example.. Lets say say i have EntityPlayerNPC.class, what i want to do is have all of the packets that get sent to the client look like they are from that of another player which is on the player, therefore allowing me to add custom NPC's... Thinking about the theory i'm sure this can be done. I've tried looking around for where the packets are being sent from and whatnot, can anyone think up a solution? edit: i tried adding a new constructor to the Packet20NamedEntitySpawn class like so: public Packet20NamedEntitySpawn(String username, EntityLiving e){ this.entityId = 0; this.name = username; this.xPosition = MathHelper.floor_double(e.posX * 32.0D); this.yPosition = MathHelper.floor_double(e.posY * 32.0D); this.zPosition = MathHelper.floor_double(e.posZ * 32.0D); this.rotation = (byte)((int)(e.rotationYaw * 256.0F / 360.0F)); this.pitch = (byte)((int)(e.rotationPitch * 256.0F / 360.0F)); this.metadata = e.getDataWatcher(); } unfortunatley, that didn't work :(

  Read the article

• Keep Getting Syntax Error C2199?

  - by DARK3ZOOZ

  Here's my problem I'm trying to define something, but keep getting a syntax error Code: #define R_RegisterShader 0x50C8A0 int (*trap_R_RegisterShader)( const char *name, int Arg_1 ) = (int (_cdecl *)(const char *, int ))R_RegisterShader; ^^^^^^^ This last part is where I keep getting the error if you need more lines of codes, just let me know. thanks http://gyazo.com/1a47ebc12cfbd6ea72feb72c686ae84d screenshot of error

  Read the article

• LIbgdx and android scaling

  - by petervaz

  Following my previous question, I decided to migrate my andengine game to libdgx to have the desktop option. The game assets were planned, at first, to use a 1080x600 resolution and I raised that to 1200x800 which is native for many tablets and would look better on monitors. I followed this blog aproach regarding aspect ratio, which worked nicely on the desktop version, but running the android version (on my smaller tablet), the background would still appear on the original size being cropped by the smaller screen size. How can I force the resize of the background (or for what matter, of everything) on android to fit the screen?

  Read the article

• Hit Detection When rotating the camera

  - by SD1990

  This bug/feature has been plaguing me for a while and i want to know the best way to fix it. I'm testing simple hit detection with a wall, like: if (Forward button) if(Inv.w.z < -49 || Inv.w.z > 49) pos.z = 0.0f; else if(Inv.w.x < -49 || Inv.w.x > 49) pos.z = 0.0f; else pos.z = +1.0f; where Inv.w. is the camera positions. Now obviously when i now hit that certain point i can no longer move away from the wall or anywhere in fact. How can i change this code to allow for the camera to be turned away from the wall so therefore i should be allowed to move? for example, the player hits the wall and i cant move until i turn around or to the side? I know its something to do with velocity but im pretty new to this so please bare with me if this is easy.

  Read the article

• Create a rectangle struct to be rotated and have a .Intersects() function

  - by MintyAnt

  In my XNA program, I am trying to swing a sword. The sword starts at an angle of 180 degrees, then rotates (clockwise) to an angle of 90 degrees. The Rectangle struct that XNA provides, Rectangle mAttackBox = new Rectangle(int x, int y, int width, int height); However, this struct has two problems: Holds position and size in Integers, not Floats Cannot be rotated I was hoping someone could help me in either telling me that i'm wrong and the Rectangle can be used for both these methods, or can lead me down the right path for rotating a rectangle. I know how to create a Struct. I believe that I can make methods like classes. I can determine the 4 vertices of a 2D rectangle by calculating out the x,y of the other 3 given the length, width. I'm sure theres a Matrix class I can use to multiply each point against a Rotation matrix. But once i have my 4 vertices, I got two other problems: - How do I test other rectangles against it? How does .Intersects() work for the rectangle struct? - Is this even the fastest way to do it? I'd be constantly doing matrix multiplication, wouldnt that slow things down?

  Read the article

• Java graphic objects as in flashgames

  - by Ryu Kajiya

  How is it possible (with the standard Java2D engine) to use small sprites like graphic objects? For those who don't know what I mean, in all those Flash-games like on Facebook they put small sprites on the screen which react to mouse-over and clicks. I tried to do the same in Java but can't find a good method. Swing components always spread over the whole bitmap, but I only want to get a reaction from the object when the mouse is over a pixel that's not transparent. So basically checking every time if the object below the mouse contains a non-transparent pixel (which i believe could be pretty intense in a gameloop or repaint loop). I have no idea how to implement such a thing efficiently.

  Read the article

• What Shading/Rendering techniques are being used in this image?

  - by Rhakiras

  My previous question wasn't clear enough. From a rendering point of view what kind of techniques are used in this image as I would like to apply a similar style (I'm using OpenGL if that matters): http://alexcpeterson.com/ My specific questions are: How is that sun glare made? How does the planet look "cartoon" like? How does the space around the planet look warped/misted? How does the water look that good? I'm a beginner so any information/keywords on each question would be helpful so I can go off and learn more. Thanks

  Read the article

• How do I create a fire sphere (fireball) in opengl? (opengl Visual C++)

  - by gn66

  I'm making an evil Pacman in OpenGL and I need to make my spheres look like a fireballs, does anyone know how I do that? And what material colour should I use? Also, is there a colour palette to change the colour of my materials? This is how I create a sphere: GLfloat mat_ambient[] = { 0.25, 0.25, 0.25, 1.0 }; GLfloat mat_diffuse[] = { 0.4, 0.4, 0.4, 1.0 }; GLfloat mat_specular[] = { 0.774597, 0.774597, 0.774597, 1.0 }; GLfloat mat_shine = 0.6; glMaterialfv (GL_FRONT, GL_AMBIENT, mat_ambient); glMaterialfv (GL_FRONT, GL_DIFFUSE, mat_diffuse); glMaterialfv (GL_FRONT, GL_SPECULAR, mat_specular); glMaterialf (GL_FRONT, GL_SHININESS, mat_shine * 128); glPushMatrix(); glTranslatef(x,y,0); glutSolidSphere(size, 20, 10); glFlush(); glPopMatrix();

  Read the article

• Problem texturing with opengl

  - by Killrazor

  Hello! I'm having problems making a simple sprite rendering. I load 2 different textures. Then, I bind these textures and draw 2 squares, one with each texture. But only the texture of the first rendered object is drawn in both squares. Its like if I'd only use a texture or as if glBindTexture don't work properly. I know that GL is a state machine, but I think that you only need to change active texture with glBindTexture. I load texture with this method: bool CTexture::generate( utils::CImageBuff* img ) { assert(img); m_image = img; CHECKGL(glGenTextures(1,&m_textureID)); CHECKGL(glBindTexture(GL_TEXTURE_2D,m_textureID)); CHECKGL(glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER,GL_LINEAR)); CHECKGL(glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER,GL_LINEAR)); //CHECKGL(glTexImage2D(GL_TEXTURE_2D,0,img->getBpp(),img->getWitdh(),img->getHeight(),0,img->getFormat(),GL_UNSIGNED_BYTE,img->getImgData())); CHECKGL(glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, img->getWitdh(), img->getHeight(), 0, GL_RGBA, GL_UNSIGNED_BYTE, img->getImgData())); return true; } And I bind textures with this function: void CTexture::bind() { CHECKGL(glBindTexture(GL_TEXTURE_2D,m_textureID)); } Also, I draw sprites with this method void CSprite2D::render() { CHECKGL(glLoadIdentity()); CHECKGL(glEnable(GL_TEXTURE_2D)); CHECKGL(glEnable(GL_BLEND)); CHECKGL(glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA)); m_texture->bind(); CHECKGL(glPushMatrix()); CHECKGL(glBegin(GL_QUADS)); CHECKGL(glTexCoord2f(m_textureAreaStart.s,m_textureAreaStart.t)); // 0,0 by default CHECKGL(glVertex3i(m_position.x,m_position.y,0)); CHECKGL(glTexCoord2f(m_textureAreaEnd.s,m_textureAreaStart.t)); // 1,0 by default CHECKGL(glVertex3i( m_position.x + m_dimensions.x, m_position.y, 0)); CHECKGL(glTexCoord2f(m_textureAreaEnd.s, m_textureAreaEnd.t)); // 1,1 by default CHECKGL(glVertex3i( m_position.x + m_dimensions.x, m_position.y + m_dimensions.y, 0)); CHECKGL(glTexCoord2f(m_textureAreaStart.s, m_textureAreaEnd.t)); // 0,1 by default CHECKGL(glVertex3i( m_position.x, m_position.y + m_dimensions.y,0)); CHECKGL(glPopMatrix()); CHECKGL(glDisable(GL_BLEND)); } Could you help me? All help is welcome. Thanks!!

  Read the article

• 3D Box Collision Data Import

  - by cboe

  I'm trying to implement a collision system using oriented bounding boxes, using a center for the box, it's extents as a 3D Vector and a rotation matrix, which is all stuff I picked up online and seem to be somewhat the standard. Detecting the center is no problem so I'm gonna leave these out here. My problem however is importing the data from a 3D file. Say I've placed a box with 2 units length on each side aligned to the world axis. The logic results here are extents of 1,1,1 and I use an identity matrix for rotation - easy. However I'm stuck when I rotate the box in the 3D program, say 30 degrees each axis. How would I parse the box? I only have these 8 vertices as information, and I guess what I would need to do is to find out the rotation of said box, apply it to the vertices so they are aligned to world axes and then calculate the extents out of that. How do I get the rotation of the box when I only have the vertex information of the box available?

  Read the article

• What's a good way to store a series of interconnected pipe and tank objects?

  - by mars

  I am working on a puzzle game with a 6 by 6 grid of storage tanks that are connected to up to 4 tanks adjacent to them via pipes. The gameplay is concerned with combining what's in a tank with an adjacent tank via the pipe than interconnects them. Right now I store the tanks in a 6x6 array, vertical pipes in a 5x6 array, and horizontal pipes in a 6x5 array. Each tank has a reference to the object that contains both tanks and pipes and when a pipe needs to be animated filling with liquid, the selected tank just calls a method on the container object telling it to animate the pipes it is connected to (subtract 1 from row or column to find connected pipes). This feels like the wrong way of doing it, as I've also considered just giving each tank references to the pipes connected to it to access directly.

  Read the article

• Communication between Box2D and libGDX Stage (Scene2D) running in separate threads

  - by atok

  I'm making a physics based 2D game using libGDX and Box2D. I want to move the execution of the simulation out of render thread. I use immutable messages and the BlockingQueue to pass the information about player actions. The Box2D applies forces and runs a frame of simulation. In the next step I would like to sync back the changes and update Scene2D Actors accordingly. Making an immutable copy of the state of the game world and sending it back using Gdx.app.postRunnable() is one option but it seems inefficient. Is there any other option?

  Read the article

• Is it possible to use a spherical collision component in UDK?

  - by Almo

  I have an object in UDK, which has a SkeletalMesh. At certain times in the game, I want this object to continue rendering the SkeletalMesh, but I'd like it to use spherical collision temporarily. After reading a bunch about PrimitiveComponents, my understanding is that UDK supports cylindrical and box-like collision, but not spherical without using a static mesh. But it seems an attached static mesh will render, since it has no bHidden attribute. There must be a way to do this, but I don't know UDK well enough yet to understand all the pitfalls.

  Read the article

• Game Asset Size Over Time

  - by jterrace

  The size (in bytes) of games have been growing over time. There are probably many factors contributing to this: trailer/cut scene videos being bundled with the game, more and higher-quality audio, multiple levels of detail being used, etc. What I'd really like to know is how the size of 3D models and textures that games ship with have changed over time. For example, if one were to look at the size of meshes and textures for Quake I (1996), Quake II (1997), Quake III: Arena (1999), Quake 4 (2005), and Enemy Territory: Quake Wars (2007), I'd imagine a steady increase in file size. Does anyone know of a data source for numbers like this?

  Read the article

• Removing/Adding a specific variable from an object inside javascript array? [migrated]

  - by hustlerinc

  I have a map array with objects stuffed with variables looking like this: var map = [ [{ground:0, object:1}, {ground:0, item:2}, {ground:0, object:1, item:2}], [{ground:0, object:1}, {ground:0, item:2}, {ground:0, object:1, item:2}] ]; Now I would like to be able to delete and add one of the variables like item:2. 1) What would I use to delete specific variables? 2) What would I use to add specific variables? I just need 2 short lines of code, the rest like detecting if and where to execute I've figured out. I've tried delete map[i][j].item; with no results. Help appreciated.

  Read the article

• Is an extra collision-mesh for level-data worth the hassle?

  - by Serthy

  What is the optimal approach for collision-detection with the environment in an 3D engine (with triangle mesh based geometry, no bsp)? A) Use the render mesh [+] no need for additional work for artists to fiddle with collision detection [-] high detail is harder for physics calculation [+/-] maybe use collidable flags for materials [+/-] compute the collision-mesh from the render-mesh B) Use an additional collision mesh [+] faster/more optimal collision-detection [-] additional work (either by the artist or by the programmer who has to develop an algorithm to compute it from the render-mesh) [-] more memory useage How do AAA title handle this? And what are the indie dev's approaches?

  Read the article

• How do professional games avoid showing pixel seams in adjacent mesh boundaries due to decimal imprecision?

  - by ufomorace

  Graphics cards are mathematically imprecise. So when some meshes are joined by their borders, the graphics card often makes mistakes and decides that some pixels at the seam represent neither object, and unwanted pixels appear. It's a natural behaviour on all graphics cards. How are such worries avoided in Pro Games? Batching? Shaders? Different tangent vectors? Merging? Overlaping seams? Dark backgrounds? Extra vertices at borders? Z precision? Camera distance tweaks? Screencap of a fix that ended up not working:

  Read the article

• OpenGL: Move camera regardless of rotation

  - by Markus

  For a 2D board game I'd like to move and rotate an orthogonal camera in coordinates given in a reference system (window space), but simply can't get it to work. The idea is that the user can drag the camera over a surface, rotate and scale it. Rotation and scaling should always be around the center of the current viewport. The camera is set up as: gl.glMatrixMode(GL2.GL_PROJECTION); gl.glLoadIdentity(); gl.glOrtho(-width/2, width/2, -height/2, height/2, nearPlane, farPlane); where width and height are equal to the viewport's width and height, so that 1 unit is one pixel when no zoom is applied. Since these transformations usually mean (scaling and) translating the world, then rotating it, the implementation is: gl.glMatrixMode(GL2.GL_MODELVIEW); gl.glLoadIdentity(); gl.glRotatef(rotation, 0, 0, 1); // e.g. 45° gl.glTranslatef(x, y, 0); // e.g. +10 for 10px right, -2 for 2px down gl.glScalef(zoomFactor, zoomFactor, zoomFactor); // e.g. scale by 1.5 That however has the nasty side effect that translations are transformed as well, that is applied in world coordinates. If I rotate around 90° and translate again, X and Y axis are swapped. If I reorder the transformations so they read gl.glTranslatef(x, y, 0); gl.glScalef(zoomFactor, zoomFactor, zoomFactor); gl.glRotatef(rotation, 0, 0, 1); the translation will be applied correctly (in reference space, so translation along x always visually moves the camera sideways) but rotation and scaling are now performed around origin. It shouldn't be too hard, so what is it I'm missing?

  Read the article

• How to attach an object to a rotating circle in box2d cocos2d?

  - by armands

  I am trying to make an object get attached on a collision point to a circle that is rotating, but the player needs to get attached with a constant point on the player. For example the player is moving back and forth and when the user touches the screen and the player jumps up but what I need is that when the player collides with the circle it attaches it's legs to it and continues rotating with the circle. So I wanted to know how to make this kind of collision joint in cocos2d box2d?

  Read the article

• SDL Bullet Movement

  - by Code Assasssin

  I'm currently working on my first space shooter, and I'm in the process of making my ship shoot some bullets/lasers. Unfortunately, I'm having a hard time getting the bullets to fly vertically. I'm a total noob when it comes to this so you might have a hard time understanding my code :/ // Position Bullet Function projectilex = x + 17; projectiley = y + -20; if(keystates[SDLK_SPACE]) { alive = true; } And here's my show function if(alive) { if(frame == 2) { frame = 0; } apply_surface(projectilex,projectiley,ShootStuff,screen,&lazers[frame]); frame++; projectiley + 1; } I'm trying to get the bullet to fly vertically... and I have no clue how to do that. I've tried messing with the y coordinate but that makes things worse. The laser/bullet just follows the ship :( How would I get it to fire at the starting position and keep going in a vertical line without it following the ship? int main( int argc, char* args[] ) { Player p; Timer fps; bool quit = false; if( init() == false ) { return 1; } //Load the files if( load_files() == false ) { return 1; } clip[ 0 ].x = 0; clip[ 0 ].y = 0; clip[ 0 ].w = 30; clip[ 0 ].h = 36; clip[ 1 ].x = 31; clip[ 1 ].y = 0; clip[ 1 ].w = 39; clip[ 1 ].h = 36; clip[ 2 ].x = 71; clip[ 2 ].y = 0; clip[ 2 ].w = 29; clip[ 2 ].h = 36; lazers [ 0 ].x = 0; lazers [ 0 ].y = 0; lazers [ 0 ].w = 3; lazers [ 0 ].h = 9; lazers [ 1 ].x = 5; lazers [ 1 ].y = 0; lazers [ 1 ].w = 3; lazers [ 1 ].h = 7; while( quit == false ) { fps.start(); //While there's an event to handle while( SDL_PollEvent( &event ) ) { p.handle_input(); //If a key was pressed //If the user has Xed out the window if( event.type == SDL_QUIT ) { //Quit the program quit = true; } } //Scroll background bgX -= 8; //If the background has gone too far if( bgX <= -GameBackground->w ) { //Reset the offset bgX = 0; } p.move(); apply_surface( bgX, bgY,GameBackground, screen ); apply_surface( bgX + GameBackground->w, bgY, GameBackground, screen ); apply_surface(0,0, FullHealthBar,screen); p.shoot(); p.show(); //Apply the message //Update the screen if( SDL_Flip( screen ) == -1 ) { return 1; } SDL_Flip(GameBackground); if( fps.get_ticks() < 1000 / FRAMES_PER_SECOND ) { SDL_Delay( ( 1000 / FRAMES_PER_SECOND ) - fps.get_ticks() ); } } //Clean up clean_up(); return 0; }

  Read the article

• How to load chunks of 2d map segments when player reaches a certain point?

  - by 2kan

  In my 2d platformer (made with Java and Slick2d), random maps are made by combining different segments together and displaying them one after the other. My problem is that I can't load too many segments or the game will run out of memory, so I want to load n number of segments at a time in chunks, then load the next chunk when the player comes near the end of one. I've attempted to do this for a couple of hours now, but I just can't get it to work at all. This is my chunk generation function where chunkLoad is the number of segments to load and BLOCK_WIDTH is the number of blocks/tiles each segment is across. Chunk1 and map are arrays of segments. Random r = new Random(); for(int i=0; i<chunkLoad; i++) { int id = r.nextInt(4)+2; chunk1[i] = new BlockMap("res/window/map"+id+".tmx", i*BLOCK_WIDTH); } map = chunk1; chunksLoaded++; The map is then drawn on the screen like this. tmap is a TiledMap object and each block/tile is 16 pixels wide for(int i=0; i<chunkLoad; i++) { map[i].tmap.render((i * BLOCK_WIDTH * 16) + (cameraX), 0); } I can successfully load new chunks, but I can't display them in the correct position, nor the hitboxes. Any suggestions? Thanks.

  Read the article

• Problem with gluOrtho2D()

  - by Shashwat

  I was trying to understand the gluOrtho2D function. I have drawn 4 lines originating from the center reaching up to 4 corners of the screen. You can follow the below code. osize is a variable which is used to set the parameters of gluOrtho2D. It will create a window of size 2*osize. If works fine when osize is 1. Lines reach the corners. But as I increase the value of osize, the length of the lines decreases (cross becomes smaller and does not cover the whole screen). But I think it should reach the corner. void display() { glClear( GL_COLOR_BUFFER_BIT ); //glViewport(0, 0, 100, 100); glMatrixMode (GL_PROJECTION); float osize = 1.2; //glOrtho(-osize*1.0, osize*1.0, osize*1.0, -osize*1.0, -1.0, 1.0); gluOrtho2D(-osize*1.0, osize*1.0, osize*1.0, -osize*1.0); glMatrixMode (GL_MODELVIEW); glBegin(GL_LINES); glColor3f(0.0, 0.0, 1.0); glVertex2f(0.0, 0.0); glVertex2f(-osize*1.0, -osize*1.0); glVertex2f(0.0, 0.0); glVertex2f(-osize*1.0, osize*1.0); glVertex2f(0.0, 0.0); glVertex2f(osize*1.0, -osize*1.0); glVertex2f(0.0, 0.0); glVertex2f(osize*1.0, osize*1.0); glEnd(); glutSwapBuffers(); //includes glFlush(); } What is the problem?

  Read the article

• Looking for algorithms regarding scaling and moving

  - by user1806687

  I've been bashing my head for the past couple of weeks trying to find algorithms that would help me accomplish, on first look very easy task. So, I got this one object currently made out of 5 cuboids (2 sides, 1 top, 1 bottom, 1 back), this is just for an example, later on there will be whole range of different set ups. I have included three pictures of this object(as said this is just for an example). Now, the thing is when the user scales the whole object this is what should happen: X scale: top and bottom cuboids should get scaled by a scale factor, sides should get moved so they are positioned just like they were before(in this case at both ends of top and bottom cuboids), back should get scaled so it fits like before(if I simply scale it by a scale factor it will leave gaps on each side). Y scale: sides should get scaled by a scale factor, top and bottom cuboid should get moved, and back should also get scaled. Z scale: sides, top and bottom cuboids should get scaled, back should get moved. Here is an image of the example object (a thick walled box, with one face missing, where each wall is made by a cuboid): Front of the object: Hope you can help,

  Read the article

• Efficient Algorithm for Recording gameplay's objects positions

  - by Scorch

  So, I have a game idea in mind, and for that I need to record the game around the player. I'me not talking about recording it as video, but rather recording the scene objects, and their positions within the game, and then render them, giving the player the ability to go back and forth, to stop time and move around. I've made a prototype with some data structures in C#, since this is going to be the programming language we'll be using in our game, but if we want the player to be able to go back just five minutes back with the data of just 100 NPC's, it takes almost 1GB of RAM. Right now, I'm just storing a Doubly linked list, each item with the object position. In the game, I'll need to store even more data in each node, so I need something even more ligher. Of course, this algorithm is zero optimized, but still, that is a lot. The alternatives would be create the NPC's that aren't really important to the game when the user is viewing the past, but I don't really like it very much for the sake of realism. I wonder if there is a better way to store this? Thanks in advance, Scorch

  Read the article

< Previous Page | 556 557 558 559 560 561 562 563 564 565 566 567  | Next Page >