Search Results

Search found 68825 results on 2753 pages for 'problem'.

Page 565/2753 | < Previous Page | 561 562 563 564 565 566 567 568 569 570 571 572  | Next Page >

• Where to find Hg/Git technical support?

  - by Rook

  Posting this as a kind of a favour for a former coleague, so I don't know the exact circumstances, but I'll try to provide as much info as I can ... A friend from my old place of employment (maritime research institute; half government/commercial funding) has asked me if I could find out who provides technical support (commercial) for two major DVCS's of today - Git and Mercurial. They have been using VCS for years now (Subversion while I was there, don't know what they're using now - probably the same), and now they're renewing their software licences (they have to give a plan some time in advance for everything ... then it goes "through the system") and although they will be keeping Subversion as well, they would like to justify beginning of DVCS as an alternative system (most people root for Mercurial since it seems simpler; mostly engineers and physicians there who are not that interested in checking Git repos for corruption and the finer workings of Git, but I believe any one of the two could "pass") - but it has to have a price (can be zero; no problem there) and some sort of official technical support. It is a pro forma matter, but it has to be specified. Most of the people there are using one of the two already, but this has to be specified to be official. So, I'm asking you - do you know where could one go for Git or Mercurial technical support (can be commercial)? Technical forums and the like are out of the question. It has to work on the principle: - I have a problem. - I post a question with the details. - I get an answer in specified time. It can be "we cannot do that." but it has to be an official answer and given in agreed time. I'm sure by now most of you understand what I'm asking, but if not - post a comment or similar. Also, if you think of any reasons which could decide justification of introducing Git/Hg from an technical and administrative viewpoint, feel free to write them down also.

  Read the article

• Organizing Business and Presentation entities

  - by simoneL

  Background I am developing a WPF project. This is the basic structure: User Interface (WPF Project); Interfaces (class library, contains all the interfaces and the entities used by the application; Modules (every module contains the logic of a specific argument, e.g. File Management, and can eventually contains Wpf User Controls). In the WPF Controls, to facilitate the binding operations I have created a BaseViewModel class which contains a Raise method that automates the binding mechanism (for further details, I used a technique similar to that one described in this article). The problem Understand which is the best way to separate Presentation form from the Business form in the entities classes. The case In the Interfaces project I have, for instance, the class User public class User { public virtual string Name { get; set; } // Other properties } In one of the modules I need to use the User class and to bind its properties to the User Interface controls. To do so I have to use a custom implementation of the get and set keywords. At first point, I thought to create a class in the Module called, for instance, ClientUser and override the properties that I need: public class ClientUser : User { private string name; public override string Name { get { return name; } set { Raise(out name, value); } } // Other properties } The problem is the Raise method, which is declared in the BaseViewModel class, but due to C# single inheritance constraint, I can't inherit from both classes. Which is the right way to implement this architecture?

  Read the article

• How to diagnose and fix Kernel Panic Fatal Machine Check error?

  - by 0x4a6f4672

  I have got a new Samsung Series 7 laptop with dual boot setup for Windows 8 and Ubuntu 12.10. A fine machine comparable to a Macbook Pro. The Ubuntu installation was quite a hassle, but with the help of Boot Repair finally it seemed to work. Or so I thought. Windows 8 starts fine, but if I want to start Ubuntu regularly the following Machine Check Exception error occurs, quite similar to this one [Hardware Error] CPU 1: Machine Check Exception: 5 Bank 6 [Hardware Error] RIP !inexact! 33 <00007fab2074598a> [Hardware Error] TSC 95b623464c ADDR fe400 MISC 3880000086 .. [similar messages for CPU 2,3 and 0] .. [Hardware Error] Machine Check: Processor context corrupt Kernel panic - not syncing: Fatal Machine Check Rebooting in 30 seconds Kernel panic does not sound good. Then it starts to reboot, and the second boot trial often works. Is it a Kernel or driver problem? The laptop has an Intel Core i7 processor. I already deactivated Hyperthreading in the BIOS, but it does not seem to help :-( I also disabled the Execute Disable Bit (EDB) flag in the BIOS. EDB is an Intel hardware-based security feature that can help reduce system exposure to viruses and malicious code. Since I disabled it, the error did occur less frequently, but it still appears occasionally :-( It seems to be the same error as described here and here. Maybe a Samsung specific Kernel problem? A similar error also happens on a Samsung Ultrabook Series 9 (which seems to be kernel bugs 49161 and 47121). At my Samsung Series 7, it still occurs for instance during booting on battery after "Checking battery state". Perhaps anyone else has an idea? These Kernel Panic errors are reallly annoying..

  Read the article

• How best to handle ID3D11InputLayout in rendering code?

  - by JohnB

  I'm looking for an elegant way to handle input layouts in my directx11 code. The problem I have that I have an Effect class and a Element class. The effect class encapsulates shaders and similar settings, and the Element class contains something that can be drawn (3d model, lanscape etc) My drawing code sets the device shaders etc using the effect specified and then calls the draw function of the Element to draw the actual geometry contained in it. The problem is this - I need to create an D3D11InputLayout somewhere. This really belongs in the Element class as it's no business of the rest of the system how that element chooses to represent it's vertex layout. But in order to create the object the API requires the vertex shader bytecode for the vertex shader that will be used to draw the object. In directx9 it was easy, there was no dependency so my element could contain it's own input layout structures and set them without the effect being involved. But the Element shouldn't really have to know anything about the effect that it's being drawn with, that's just render settings, and the Element is there to provide geometry. So I don't really know where to store and how to select the InputLayout for each draw call. I mean, I've made something work but it seems very ugly. This makes me thing I've either missed something obvious, or else my design of having all the render settings in an Effect, the Geometry in an Element, and a 3rd party that draws it all is just flawed. Just wondering how anyone else handles their input layouts in directx11 in a elegant way?

  Read the article

• Evolution of an Application: how to manage and improve core engine?

  - by Phil Carter

  The web application I work on has been live for a year now, but it's time for it to evolve and one of the ways in which it is evolving is into a multi-brand application - in this case several different companies using the application, different templates/content and some slight business logic changes between them. The problem I'm facing is implementing a best practice across the site where there are differences in business logic for each brand. These will mostly be very superficial, using a an alternative mailing list provider or capturing some extra data in a form. I don't want to have if(brand === x) { ... } else { ... } all over the site especially as most of what needs to be changed can be handled with extending the existing class. I've thought of several methods that could be used to instantiate the correct class, but I'm just not sure which is going to be best especially as some seem to lead to duplication of more code than should be necessary. Here's what I've considered: 1) Use a Static Loader similar to Zend_Loader which can take the class being requested, and has knowledge of the Brand and can then return the correct object. $class = App_Loader::getObject('User', $brand); 2) Factory classes. We use these in the application already for Products but we could utilise them here also to provide a transparent interface to the class. 3) Routing the page request to a specific brand controller. This however seems like it would duplicate a lot of code/logic. Is there a pattern or something else I should be considering to solve this problem? 4) How to manage a growing project that has multiple custom instances in production? Update This is a PHP application so the decisions on which class to load are made per request. There could be upwards of 100+ different 'brands' running.

  Read the article

• Approaches to timed puzzle elements

  - by ndg

  I'm working on a side scrolling game that has a number of timed puzzle elements. As a simple example: I have a number of moving platforms that have been setup to transition in a pattern. Ideally I'd like to ensure that as the player first approaches them, they are in an ideal state -- whereby the player can witness the full transition and more experienced players (i.e: speedrunners) can complete the puzzle immediately without having to wait for the current transition to complete. The issue here, in a nutshell, is that because these platforms begin transitioning at the start of the level, it's impossible to correctly calculate when the player is likely to stumble upon them. I've done a fair bit of Googling but haven't managed to turn up any decent resources with regards to solving a problem like this. The obvious solution is to only begin updating the objects when the player (or more likely: the camera) first encounters them. But this becomes difficult when you consider more complicated situations. It seems like potentially the easiest way of handling this is to have an invisible trigger volume that will tell any puzzle elements located inside of it that the player has 'arrived' upon first colliding with the player. But this would mean I'd have to logically group puzzle elements, which could become fairly messy in a hurry. Take, for instance, a puzzle that appears to the right of the screen. It may take the player a number of seconds to reach it. It would look strange if the elements involved were to remain stationary. But by the time the player arrives, it's likely things will be 'out of sync'. I wanted to post here in the hopes that others know of, or have implemented, a decent solution to this problem?

  Read the article

• Ralink RT3060 wireless device configuration on ubuntu 12.04

  - by Stephan

  concerning How do I get a Ralink RT3060 wireless card working? I'm running Ubuntu 12.04 with a 'LWPX07 Edimax EW-7711In 150M 1T1R WL PCI Card' which has a rt3060 chip. Out of the box the card is recognized as rt2800sta. I tried solution one, that didn't work. Still the card connects to the wireless network, but it seems to slow to load any pages. Then I tried solution 2, but then the network-manager doesn't see any wireless device. $ iwconfig lo no wireless extensions. ra0 Ralink STA Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. $ lsmod Module Size Used by rt3562sta 882296 0 $ lspci -v 05:02.0 Network controller: Ralink corp. RT3060 Wireless 802.11n 1T/1R Subsystem: Edimax Computer Co. Device 7711 Flags: bus master, slow devsel, latency 64, IRQ 23 Memory at ff9f0000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: rt2860 Kernel modules: rt3562sta, rt2800pci Am I missing a configuration step? How do I tell the network card which driver to use? Thanks in advance Stephan I found the problem. As described in stevens blog http://steveswinsburg.wordpress.com/2011/03/12/how-to-install-a-d-link-dwa-525-wireless-network-card-in-ubuntu-10-04/ sudo su make && make install "You need to use ‘sudo su’ and not just ‘sudo’ so it creates the directories properly." That is the problem with the solution describe above.

  Read the article

• Slow dvd burning/reading speeds: how to solve

  - by wouter205

  I have a problem on which I'm struggling since i started using linux a year ago on my desktop, but still haven't found a solution for it. When reading or burning a dvd, the speeds are very slow (mostly under 1x) whilst I did selected the fastest speed in k3b. As such, it takes up to 40-50 minutes to burn one dvd! I read about enabling dma this post but it didn't help. This is the output for dmesg | grep -i dma > [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3527 pages used for memmap [ 0.000000] DMA32 zone: 254441 pages, LIFO batch:31 [ 0.000000] Policy zone: DMA32 [ 0.120356] pnp 00:01: [dma 4] [ 0.120968] pnp 00:05: [dma 2] [ 0.121421] pnp 00:06: [dma 3] [ 0.122617] pnp 00:0b: [dma 0 disabled] [ 0.852321] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe480 bmdma 0xe000 irq 19 [ 0.852325] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 19 [ 0.861633] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 0.861636] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.329411] ata1.00: ATA-7: Maxtor 6V250F0, VA111630, max UDMA/133 [ 1.345418] ata1.00: configured for UDMA/133 [ 1.820606] ata4.00: ATAPI: PHILIPS DVDR1660P1, P1.3, max UDMA/33 [ 1.820610] ata4.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled [ 1.820613] ata4.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. [ 1.836681] ata4.00: configured for UDMA/33 [ 12.296600] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] reading the third and fourth last line, I assume there is indeed a problem with dma? edit: this question still is not solved. Could anyone come up with an other solution please? Thanks

  Read the article

• Reliable alert dialogs from the shell

  - by intuited

  I'd like to have a message pop up in response to various system events, mostly in order to be able to set reminders for myself from a shell session. There are a few ways to do this; zenity seems to be the most polished. However, I've found at least two problems with zenity: Messages do not appear on all workspaces. I tried using the gtk option --screen to control this, but they just appear on the current workspace regardless. So if I am switching workspaces as the message comes up, I will not see it. Messages do not appear above all other windows. Specifically, if I am using guake, a new zenity message will appear below the guake window and I won't be able to see it. I tried a few other apps a while back. Both gmessage and xmessage exhibited problem 1; gmessage also exhibited problem 2. I did find that kalarm, which can be scripted from the command line, worked acceptably, but I'm trying to avoid running the KDE stack if possible, and would prefer something lightweight with zenity's versatility. It seems that it might be possible to arrange for these problems to be resolved by setting the WM_CLASS, but I'm in a bit over my head there. It might also be possible to make modifications to the window after it launches with a script, but again I'm not sure where to look for resources on that.

  Read the article

• Strange characters appearing on websites - ASCII? - UNICODE?

  - by Mick

  I have created many very simple pure HTML websites over the years. Most of them appear to work fine most of the time. But there is one recurring problem which I have never quite sorted out involving strange characters. The scenario goes like this: I create the site. I look at it in my browser, everything appears fine. I may look at it a great many times over the coming weeks or months as I make additions here and there. Perhaps on a variety of browsers on a variety of PC's. Then one day I look at the page and see a random sprinkling of white question marks against dark diamond shapes. These might appear where I had expected to see hyphens or quotes or apostrophes. My immediate thought is that my browser got into some strange state because I was looking at some foreign website with strange characters, but I'm never quite sure. I'm left with that nagging feeling that perhaps half the planet is seeing my website with funny question marks all over it. So my question is what's going on? What should I do to ensure that as many people as possible around the world can view my text as I originally intended? Should I be using those special html sequences like &pound; for all non alphanumeric characters? Should I worry at all? Edit: Right now I have the problem occurring on this page: http://www.fullreservebanking.com/papers.htm ... part of it looks like this: I am using FireFox 5 and the character encoding currently appears to be "UNICODE (UTF-8)". I do not remember manually setting the character encoding to anything since installation. I do occasionally look at Japanese websites for work related reasons - though when I do so, I do not manually make any changes to firefox settings. Edit: Now fixed. Web page altered accordingly.

  Read the article

• Can't complete dropbox installation from behind proxy

  - by Mark Jones

  Problem: My PC on campus sits behind a proxy (requiring authentication) and I can't setup Dropbox. I am convinced that this is a proxy issue as I can't setup Ubuntu one either (but I don't use Ubuntu One so that is not a problem). I have looked at the Ubuntu One fix but it seems to be to modify settings explicitly related to Ubuntu One. I can install the nautilus-dropbox package (compiled from source and from .deb package from website and from software centre) but once I click OK from the "Dropbox Installation" dialog box (prompting me to download the proprietary daemon) the installation just freezes with the OK button pressed. When I look at its process in System Monitor its waiting channel is inet_wait_for_connect. I have set the following proxy directives thus far: Added mj22:**@proxy.waikato.ac.nz:80 information to network proxy settings under network in settings. Added http_host and http_port variables under gconf-editor-system-proxy Added 'host', 'authentication_password' 'authentication_user' and ticked 'user authentication' and 'use_http_proxy' under gconf-editor-system-http_proxy Added export http_proxy="http://mj22:**@proxy.waikato.ac.nz:80/" to /etc/bash.bashrc Added Acquire::http::proxy "http://mj22:**@proxy.waikato.ac.nz:80/"; to /etc/apt/apt.conf (which is what I imagine is letting Software Center retrieve packages). (where ** is my password) I have also added the equivalent ftp and https lines for the above entries. I get the internet fine and Software Centre can download packages but thats it. Related issues: The software centre can't fetch reviews (but can download packages). When trying to add an online account in Gnome 3 a dialog pop up appears with "Error getting a Request Token: Cannot connect to proxy (proxy.waikato.ac.nz)" Updates: After some time (10mins ish) Dropbox shows an error dialog box that reads: Trouble connecting to Dropbox servers. Maybe your internet connection is down, or you need to set you http_proxy environment variable. Is there a way I can see what environment variables are currently set?

  Read the article

• FMw Diagnostic Framework : Automatic Capture of Diagnostic Data Upon First Failure!

  - by Daniel Mortimer

  Introduction There is nothing more frustrating than a problem that "cannot be reproduced". Logs, configuration files have been analysed but there just isn't enough information to establish the root cause. The issue maybe closed, but you are left with the feeling that the problem will raise its ugly head again in the future. Trouble is, to resolve such issues you need to capture diagnostic data at the exact time the incident occurs. Step forward Fusion Middleware Diagnostic Framework!  Diagnostic Framework monitors WebLogic Managed Servers and delivers "Automatic capture of diagnostic data upon first failure". To quote fromOracle Fusion Middleware Administrator's Guide 11g Release 1 (11.1.1)Chapter 13 Diagnosing Problems "When a critical error occurs ... the Diagnostic Framework automatically collects diagnostics, such as thread dumps, DMS metric dumps, and WebLogic Diagnostics Framework (WLDF) server image dumps ... The data is stored in a file-based repository and is accessible with command-line utilities." In other words the data collected upon first failure - especially the thread and image dumps - provides a snapshot of the system as or immediately after the problem occurs. The table below shows the type of WebLogic Server issues which fall into the scope of Diagnostic Framework How to Configure Diagnostic Framework? Depending on your Fusion Middleware product choice you may not need to do anything! Diagnostic Framework is automatically installed, configured and initiated for any WebLogic Domain which has the Oracle Java Required Files (JRF) template applied. This template is applied by default whenever you configure WebLogic Managed Servers for products such as Portal / Forms / Reports / Discoverer Identity Management ( OID , OAM , OIM etc) WebCenter SOA Check your WebLogic Domain directory structure. If you have an "adr" sub directory under DOMAIN_HOME/servers/<servername>/ then JRF template has been applied and Diagnostic Framework will be in play. Should the "adr" sub directory not exist, review the advice given in My Oracle Support article How to Apply FMW ( EM ) Control and JRF to a WebLogic Domain and Managed Servers [ID 947043.1] If you are working with a standalone WebLogic Server solution and applying Oracle JRF is not acceptable, consider using WLDF - WebLogic Diagnostic Framework. (Fusion Middleware Diagnostic Framework makes use of WLDF under the covers.) Couple of useful links about WLDF are listed below Configuring and Using the Diagnostics Framework for Oracle WebLogic Server 11g WebLogic Diagnostics Framework-A Very Useful Tool [A nice blog which describes a WLDF use case] How to Get Started With Diagnostic Framework To be frank, the Fusion Middleware Administrator's Guide is the best place to start your learning Oracle Fusion Middleware Administrator's Guide 11g Release 1 (11.1.1)Chapter 13 Diagnosing Problems A lot of reading here,  but if you are in hurry and just want to get the right information to Oracle Support to help resolve your issue, check out the next section below. How to Upload Diagnostic Framework Incident Data to Oracle Support Some Background Information There are three interfaces to the Repository: Enterprise Manager Cloud Control (Support Workbench) WLST (Command Line) ADRCI (Command Line) The Enterprise Manager Cloud Control does provide a nice GUI interface to search, view and package diagnostic framework incidents. However, this software is not to be confused with Fusion Middleware (EM) Control. Cloud Control (formerly known as Grid Control) is part of the Enterprise Manager media package. EM Cloud Control has it's own install and configuration story. Therefore, for the benefit of those yet to install and play with Cloud Control, I am going to describe how to use the command line tools. Ideally, you would only need to one command line interface, but currently I suggest using both - mainly due to the fact that ADRCI SHOW INCIDENTS does not reveal the description behind the Diagnostic Framework error code. Instructions: Note: WLST and ADRCI are case sensitive when it comes to handling parameter values. If you make a mistake, expect an unfriendly syntax error message. 1) Find the incident Note: The managed server which you are troubleshooting must be up and running. If the managed server is down, ensure the domain's Admin Server is accessible. If you cannot connect to the Admin Server or the Managed Server the example WLST commands will not work. a) Launch WLST  Note: Use the WLST which resides in the "oracle_common" directory (not WL_HOME/common/bin) otherwise you will get a syntax error like the one below Traceback (innermost last):  File "<console>", line 1, in ?NameError: listIncidents MW_HOME/oracle_common/common/bin/wlst.sh b) Connect to the managed server or the admin server e.g. wls:/offline> connect('weblogic','welcome1','t3://localhost:7020') c) Run the command wls:/MyDomain/serverConfig> listIncidents() This will list the incidents for the server to which you have connected. If you have connected to the Admin Server and want to list the incidents for a managed server within the domain, use the command wls:/MyDomain/serverConfig> listIncidents(adrHome='diag\ofm\MyDomain\MyManagedServer' ,server='MyManagedServer') Example output Incident Id     Problem Key              Incident Time         1       DFW-99998 [java.lang.NullPointerException] [oracle.error.simulator.ErrorSimulator.createNullPointerException][errorWebApp_1-0-0-0]        Fri Nov 02 10:38:46 GMT 2012  The piece highlighted in bold is the description you do not see when using the ADRCI 'SHOW INCIDENT' command. Make a note of the incident id. You are ready to move to step 2 2. Package the incident a) Set up the environment - example commands below are for Unix cd <DOMAIN_HOME>/bin . ./setDomainEnv.sh If you want ADRCI to run a Remote Diagnostic Agent collection (recommended) at generate package time, point ORACLE_HOME at oracle_common ORACLE_HOME=$MW_HOME/oracle_common; export ORACLE_HOME To prevent ADRCI from running RDA at generate package time, point ORACLE_HOME at WL_HOME/server/adr directory.  ORACLE_HOME=$WL_HOME/server/adr; export ORACLE_HOME b) Launch adrci $WL_HOME/server/adr/adrci c) Set BASE and HOMEPATH adrci> SET BASE /oracle/middleware/user_projects/domains/ mydomain/servers/mymanagedserver/adr adrci> SET HOMEPATH diag/ofm/mydomain/mymanagedserver d)  Optionally run SHOW INCIDENTS e.g. adrci> SHOW INCIDENTS -MODE DETAIL ADR Home = /oracle/middleware/user_projects/domains/mydomain/ servers/mymanagedserver/adr/diag/ofm/mydomain/mymanagedserver:***********************************************************************************************************************************INCIDENT INFO RECORD 1**********************************************************   INCIDENT_ID                   1   STATUS                        ready   CREATE_TIME                   2012-11-02 10:38:46.468000 +00:00   PROBLEM_ID                    1   CLOSE_TIME                    <NULL>   FLOOD_CONTROLLED              none   ERROR_FACILITY                DFW   ERROR_NUMBER                  99998   ERROR_ARG1                    <NULL>   ERROR_ARG2                    <NULL>   ERROR_ARG3                    <NULL>   ERROR_ARG4                    <NULL>   ERROR_ARG5                    <NULL>   ERROR_ARG6                    <NULL>   ERROR_ARG7                    <NULL>   ERROR_ARG8                    <NULL>   ERROR_ARG9                    <NULL>   ERROR_ARG10                   <NULL>   ERROR_ARG11                   <NULL>   ERROR_ARG12                   <NULL>   SIGNALLING_COMPONENT          <NULL>   SIGNALLING_SUBCOMPONENT       <NULL>   SUSPECT_COMPONENT             <NULL>   SUSPECT_SUBCOMPONENT          <NULL>   ECID                          5162744c6a2eea5e:155ff445:13ac0aae7cb:-8000-0000000000000325   IMPACTS                       01 rows fetched e)  Create a logical package IPS CREATE PACKAGE INCIDENT incident_number e.g. adrci> IPS CREATE PACKAGE INCIDENT 1Created package 1 based on incident id 1, correlation level typical f) Generate the package IPS GENERATE PACKAGE package_number IN path e.g. adrci> IPS GENERATE PACKAGE 1 IN /tmp Generated package 1 in file /tmp/DFW99998j_20121102113633_COM_1.zip, mode complete Note: If the generate package command hangs, ADRCI may be experiencing an issue when running RDA. To avoid such trouble, exit ADRCI and point the ORACLE_HOME environment variable at WL_HOME/server/adr 3) Upload the package zip to Oracle Support via your Service Request a) Log into My Oracle Support and locate your Service Request b) Click on "Add Attachments c) And upload the zip file

  Read the article

• Google-Chrome 10 stable crash on every page

  - by Achu

  I installed google-chrome today, when i open any page including askubuntu i got this error message. i see my memory usage is normal(Memory 56% and swap 4.8%) also I reload and i go to another page same problem What is the problem? the last dmesg output [26612.341865] lo: Disabled Privacy Extensions [29651.852476] chrome[15472] general protection ip:1528e26 sp:7fff514a9dc0 error:0 in chrome[400000+3082000] [31447.190586] [UFW BLOCK] IN=eth1 OUT= MAC=00:1c:25:a1:e7:67:00:16:3e:28:5a:b7:08:00 SRC=172.23.100.6 DST=172.23.20.128 LEN=69 TOS=0x00 PREC=0x00 TTL=128 ID=15939 PROTO=UDP SPT=4243 DPT=161 LEN=49 [31451.250190] [UFW BLOCK] IN=eth1 OUT= MAC=00:1c:25:a1:e7:67:00:16:3e:28:5a:b7:08:00 SRC=172.23.100.6 DST=172.23.20.128 LEN=69 TOS=0x00 PREC=0x00 TTL=128 ID=16180 PROTO=UDP SPT=4243 DPT=161 LEN=49 [31454.260150] [UFW BLOCK] IN=eth1 OUT= MAC=00:1c:25:a1:e7:67:00:16:3e:28:5a:b7:08:00 SRC=172.23.100.6 DST=172.23.20.128 LEN=69 TOS=0x00 PREC=0x00 TTL=128 ID=16322 PROTO=UDP SPT=4243 DPT=161 LEN=49 [31458.648164] [UFW BLOCK] IN=eth1 OUT= MAC=00:1c:25:a1:e7:67:00:16:3e:28:5a:b7:08:00 SRC=172.23.100.6 DST=172.23.20.128 LEN=69 TOS=0x00 PREC=0x00 TTL=128 ID=16513 PROTO=UDP SPT=4243 DPT=161 LEN=49 [33124.300112] lo: Disabled Privacy Extensions [33601.021406] Skipping EDID probe due to cached edid [34594.043501] chrome[15746]: segfault at 0 ip 0000000000d5cdd0 sp 00007fff5149ec20 error 6 in chrome[400000+3082000] [34597.395334] chrome[18112] general protection ip:17c85bf sp:7fff514aa4f0 error:0 in chrome[400000+3082000] [34616.786643] chrome[18124]: segfault at 1007 ip 00000000017c849f sp 00007fff514aabd0 error 4 in chrome[400000+3082000] [37277.436207] lo: Disabled Privacy Extensions [38549.501390] e1000e: eth1 NIC Link is Down [38551.122253] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [38551.122263] e1000e 0000:00:19.0: eth1: 10/100 speed: disabling TSO

  Read the article

• Do we really need a thousand Linux distributions?

  - by nebukadnezzar

  Pointed from an answer to a (possibly related) question, I came across this graphic, and I'm shocked how many linux distributions currently exist. However, it seems that most of these distributions are forks of already popular distributions with minimal changes, usually limited to themes, wallpapers, buttons, the kind of stuff most people probably wouldn't see as a reason to fork a Linux distribution. Of course, someone will always say "Opensource is also about the freedom of choice", and while I wholeheartedly agree, I do not believe that this is a valid reason to fork an already perfectly working Distribution into a new one, which might possibly result in less security/stability due to smaller group of developers. There's another problem: Those, who want to switch to Linux, are confronted with a neverending list of Linux distributions, and wonder rightfully which they're supposed to chose (infact, I was facing that problem before I've discovered Ubuntu). There might be (very few) valid reasons to fork a distribution: Specializing on a particular topic (FOSS Only, work-related topic (i.e., for a Hospital), etc) An exceptional architecture, that requires a special set of software Use of non-FOSS, propietary technology, and such But even with these points in mind, it would still seem easier to create a subdistribution with the required changes, such as XUbuntu with XFCE4, KUbuntu with KDE4, Fluxbuntu with Fluxbox, etc. So, why exactly do we need so many distributions?

  Read the article

• How to join video files from terminal?

  - by Leon Vitanos

  I have tried avidemux2_cli, mencoder, ffmpeg, cat.. But this doesn't always work (With the most of the times the error is that the audio codec is not the same) Maybe i put wrong options in the commands. So the commands: cat Sample.avi rrr.avi > complete.avi ffmpeg -i Sample.avi -i output.avi -vcodec copy -acodec copy complete.avi mencoder -ovc lavc -oac copy Sample.avi rrr.avi -o complete.avi avidemux2_cli --audio-codec copy --video-codec copy --output-format avi --load Sample.avi -append output.avi --save video.avi The cat problem is that it doesn't show error but it doesn't work always..Like the complete.avi will be exactly the same with Sample.avi Fmmpeg does nothing. The complete.avi is always the same with Sample.avi Mencoder error: All files must have identical audio codec and format for -oac copy. So the complete.avi is the same with Sample.avi avidemux2_cli there is no error but the complete.avi is again the same with Sample.avi.. So to sum up, all complete.avi are the same with Sample.avi.. And the problem is that they don't have the same audio codec ( i quess ).. Any ideas?

  Read the article

• Perl - can't flush STDOUT or STDERR

  - by Jim Salter

  Perl 5.14 from stock Ubuntu Precise repos. Trying to write a simple wrapper to monitor progress on copying from one stream to another: use IO::Handle; while ($bufsize = read (SOURCE, $buffer, 1048576)) { STDERR->printflush ("Transferred $xferred of $sendsize bytes\n"); $xferred += $bufsize; print TARGET $buffer; } This does not perform as expected (writing a line each time the 1M buffer is read). I end up seeing the first line (with a blank value of $xferred), and then the 7th and 8th lines (on an 8MB transfer). Been pounding my brains out on this for hours - I've read the perldocs, I've read the classic "Suffering from Buffering" article, I've tried everything from select and $|++ to IO::Handle to binmode (STDERR, "::unix") to you name it. I've also tried flushing TARGET with each line using IO::Handle (TARGET-flush). No dice. Has anybody else ever encountered this? I don't have any ideas left. Sleeping one second "fixes" the problem, but obviously I don't want to sleep a second every time I read a buffer just so my progress will output on the screen! FWIW, the problem is exactly the same whether I'm outputting to STDERR or STDOUT.

  Read the article

• Proper way to let user enter password for a bash script using only the GUI (with the terminal hidden)

  - by MountainX

  I have made a bash script that uses kdialog exclusively for interacting with the user. It is launched from a ".desktop" file so the user never sees the terminal. It looks 100% like a GUI app (even though it is just a bash script). It runs in KDE only (Kubuntu 12.04). My only problem is handling password input securely and conveniently. I can't find a satisfactory solution. The script was designed to be run as a normal user and to prompt for the password when a sudo command is first needed. In this way, most commands, those not requiring sudo rights, are run as the normal user. What happens (when the script is run from the terminal) is that the user is prompted for their password once and the default sudo timeout allows the script to finish, including any additional sudo commands, without prompting the user again. This is how I want it to work when run behind the GUI too. The main problem is that using kdesudo to launch my script, which is the standard GUI way, means that the entire script is executed by the root user. So file ownerships get assigned to the root user, I can't rely upon ~/ in paths, and many other things are less than ideal. Running the entire script as the root user is just a very unsatisfactory solution and I think it is a bad practice. I appreciate any ideas for letting a user enter the sudo password just once via GUI while not running the whole script as root. Thanks.

  Read the article

• Getting a double slash when redirecting for a canonical hostname on Firefox only

  - by Brian Neal

  I have a Django powered website, and I'm trying to solve the "canonical hostname" problem. I want www.example.com to redirect to example.com. I have tried both techniques found in the Apache documentation here (scroll down to Canonical hostnames). I'm currently trying the mod_rewrite method, and I have this in a virtual host container: RewriteEngine on RewriteCond %{HTTP_HOST} ^www\.example\.com$ [NC] RewriteRule ^/?(.*)$ http://example.com/$1 [L,R=301,NE] This works for me, except for one case. In Firefox only, if I type www.example.com in a browser, it redirects and I see this in the URL bar: example.com// (note the 2 trailing slashes). However, something like this will work correctly: www.example.com/news/ gets redirected to example.com/news/. I only see this on the root URL in Firefox. It seems to work fine on Windows under Chrome, IE9, and Opera (maybe those browsers eat the double slash?). My Mac using friend says it is fine in Safari, but he also sees the problem in Firefox. As far as Django settings go, I am using the default value of APPEND_SLASH=True. I don't know if Django has anything to do with it, but I've tried mod_rewrite rules like the above on static HTML sites before and it always seems to work.

  Read the article

• Red Dot Scope Makes Sighting In Long Lenses a Snap

  - by Jason Fitzpatrick

  If you’ve ever used a high power lens, you know how tricky it can be to sight a distant subject as the field of view through the lens is so tiny. This hack takes care of that problem by using a zero-magnification red dot rifle scope. Chris Malcolm enjoys photographing birds and other wildlife with high power lenses. The problem, when shooting with huge 500mm lens and other high power lenses, is that they’re practically telescopes and acquiring a fast moving target like a bird using a through-the-lens technique is very tricky. Malcolm’s solution hinges on mounting a zero-magnification red dot rifle scope in parallel with the lens. His mock up is a bit unpolished (although we can understand not wanting to run out and buy a brand new black scope just for the experiment) but works great to get him on target. Hit up the link below to read more about his build, how be created the rail mount for the scope, and why he opted to mount it to the barrel of the lens and not the hot shoe mount on the camera. 500mm Reflex Lens with Red Dot Sight [via DIY Photography] Make Your Own Windows 8 Start Button with Zero Memory Usage Reader Request: How To Repair Blurry Photos HTG Explains: What Can You Find in an Email Header?

  Read the article

• How to run boot loader in VMWare?

  - by Asim Haroon

  I am using Ubuntu as a virtual machine in VMWare. I have used this code to write a boot loader which would write Hello world on the screen. [BITS 16] [ORG 0x7C00] MOV SI, HelloString CALL PrintString JMP $ PrintCharacter: MOV AH, 0x0E MOV BH, 0x00 MOV BL, 0x07 INT 0x10 RET PrintString: next_character: MOV AL, [SI] INC SI OR AL, AL JZ exit_function CALL PrintCharacter JMP next_character exit_function: RET HelloString db 'Hello World', 0 TIMES 510 - ($ - $$) db 0 DW 0xAA55 I wrote this code in the text editor in Ubuntu and saved the file as Boot.asm Then I compiled the Boot.asm to boot.bin file by using this command nasm -f bin -o boot.bin Boot.asm and it didn't gave me any errors. After that I copied the boot.bin file to my usb and took it to my Windows OS. After this I burned the boot.bin file to boot.img and boot.iso files. Then I created a new virtual machine and named it booter, when it asked for the .iso file of the OS I want to run I gave it the boot.iso file, about which I told above, then I powered on that virtual machine but it gave me this error PXE-M0F: No boot filename received PXE-M0F: Exiting Intel PXE ROM Operating System not found Please tell me what is the main problem and how can I overcome that problem.

  Read the article

• How do I express subtle relationships in my data?

  - by Chuck H

  "A" is related to "B" and "C". How do I show that "B" and "C" might, by this context, be related as well? Example: Here are a few headlines about a recent Broadway play: 1 - David Mamet's Glengarry Glen Ross, Starring Al Pacino, Opens on Broadway 2 - Al Pacino in 'Glengarry Glen Ross': What did the critics think? 3 - Al Pacino earns lackluster reviews for Broadway turn 4 - Theater Review: Glengarry Glen Ross Is Selling Its Stars Hard 5 - Glengarry Glen Ross; Hey, Who Killed the Klieg Lights? Problem: Running a fuzzy-string match over these records will establish some relationships, but not others, even though a human reader could pick them out from context in much larger datasets. How do I find the relationship that suggests #3 is related to #4? Both of them can be easily connected to #1, but not to each other. Is there a (Googlable) name for this kind of data or structure? What kind of algorithm am I looking for? Goal: Given 1,000 headlines, a system that automatically suggests that these 5 items are all probably about the same thing. To be honest, it's been so long since I've programmed I'm at a loss how to properly articulate this problem. (I don't know what I don't know, if that makes sense). This is a personal project and I'm writing it in Python. Thanks in advance for any help, advice, and pointers!

  Read the article

• Command-Query-Separation and multithreading safe interfaces

  - by Tobias Langner

  I like the command query separation pattern (from OOSC / Eiffel - basically you either return a value or you change the state of the class - but not both). This makes reasoning about the class easier and it is easier to write exception safe classes. Now, with multi threading, I run into a major problem: the separation of the query and the command basically invalidates the result from the query as anything can happen between those 2. So my question is: how do you handle command query separation in an multi-threaded environment? Clarification example: A stack with command query separation would have the following methods: push (command) pop (command - but does not return a value) top (query - returns the value) empty (query) The problem here is - I can get empty as status, but then I can not rely on top really retrieving an element since between the call of empty and the call of top, the stack might have been emptied. Same goes for pop & top. If I get an item using top, I can not be sure that the item that I pop is the same. This can be solved using external locks - but that's not exactly what I call threadsafe design.

  Read the article

• SFML programs fails to debug with glslDevil

  - by Zhen

  I'm testing the glslDevil debugger with a simple (and working) SFML application in Linux + NVidia. But it always fails in the window creation step: W! Program Start | glXGetConfig(0x86a50b0, 0x86acef8, 4, 0xbf8228c4) | glXGetConfig(0x86a50b0, 0x86acef8, 5, 0xbf8228c8) | glXGetConfig(0x86a50b0, 0x86acef8, 8, 0xbf8228cc) | glXGetConfig(0x86a50b0, 0x86acef8, 9, 0xbf8228d0) | glXGetConfig(0x86a50b0, 0x86acef8, 10, 0xbf8228d4) | glXGetConfig(0x86a50b0, 0x86acef8, 11, 0xbf8228d8) | glXGetConfig(0x86a50b0, 0x86acef8, 12, 0xbf8228dc) | glXGetConfig(0x86a50b0, 0x86acef8, 13, 0xbf8228e0) | glXGetConfig(0x86a50b0, 0x86acef8, 100000, 0xbf8228e4) | glXGetConfig(0x86a50b0, 0x86acef8, 100001, 0xbf8228e8) | glXCreateContext(0x86a50b0, 0x86acef8, (nil), 1) E! Child process exited W! Program termination forced! And the code that fails: #include <SFML/Graphics.hpp> #define GL_GLEXT_PROTOTYPES 1 #define GL3_PROTOTYPES 1 #include <GL/gl.h> #include <GL/glu.h> #include <GL/glext.h> int main(){ sf::RenderWindow window{ sf::VideoMode(800, 600), "Test SFML+GL" }; bool running = true; while( running ){ sf::Event event; while( window.pollEvent(event) ){ if( event.type == sf::Event::Closed ){ running = false; }else if(event.type == sf::Event::Resized){ glViewport(0, 0, event.size.width, event.size.height); } } window.display(); } return 0; } Is It posible to solve this problem? or get around the problem to continue the gslsDevil use?.

  Read the article

• korgac - init.d kill script on shutdown

  - by Max Magnus

  I'm new to Ubuntu 12.04 and Linux and my English is not the best, so I'm sorry for incorrect or stupid questions. I've installed KOrganizer and to start the reminder when I boot the system, I added the korgac command to the autostart. This works fine. But now, every time I want to reboot or shutdown my system, there appears a message that tells me that an unknown process is still running... so I have kill it manually before reboot/shutdown. I knew that it is the korgac process that causes this problem, so I decided to create an init.d script. I've created a script, put it into init.d, and created 2 symbolic links: to rc0.d and to rc6.d. The name starts with K10script... (I hope it is correct so). K10korgac_kill: #! /bin/sh pkill korgac exit 0 Unfortunately this wasn't able to resolve my problem. Maybe my script is wrong. I hope someone can help me. Thanks for your time Max

  Read the article

• Management Reporter Installation – Lessons Learned Part II - Dynamics GP

  - by Ryan McBee

  After feeling pretty good about my deployment skills of Management Reporter for Dynamics GP a few weeks ago, I ran into two additional lessons learned that I wanted to share. First, on another new deployment, I got the error shown below which says “An error occurred while creating the database.  View the installation log for additional information.”  This problem initially pointed me to KB 2406948 which did not provide resolution. After several hours of troubleshooting, I found there is an issue if the defaults database locations in SQL Server are set to the root of a drive. You will want to set the default to something like the following to get it installed; C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA.  My default database locations for the data and log files were indeed sitting on the H:\ and I:\ drives. To change this property in your SQL Server Instance you need to open SQL Server Management Studio, right click on the server, and choose properties and then database settings. When I initially got the error, I briefly considered creating the ManagementReporter database by hand, but experience tells me that would have created more headaches down the road. The second problem I ran into with this particular deployment of Management Reporter happened when I started the FRx conversion utility.  The errors reads “The ‘Microsoft.ACE.OLEDB.12.0’ provider is not registered on the local machine. I had a suspicion that this error was related to the fact FRx uses outdated technology and I happened to be on a new install of Server 2008 R2.  A knowledge base search quickly pointed me to KB 2102486. The resolution for this Management Reporter issue was to install the Microsoft Access Database Engine Redistributable, by following the site below. http://www.microsoft.com/downloads/details.aspx?familyid=C06B8369-60DD-4B64-A44B-84B371EDE16D&displaylang=en

  Read the article

< Previous Page | 561 562 563 564 565 566 567 568 569 570 571 572  | Next Page >