Search Results

Search found 40031 results on 1602 pages for 'command message'.

Page 567/1602 | < Previous Page | 563 564 565 566 567 568 569 570 571 572 573 574  | Next Page >

  • How can I get Thunderbird to automatically move messages?

    - by David Heffernan
    I have Thunderbird 15. I'd like to automatically move messages from one folder to another. My mail account is an IMAP account. My Blackberry is also connected to the account and when it sends mail, it places a copy on the IMAP server in a folder named Sent Items. I'd like those messages to be moved to my Inbox automatically. By default message filters are only applied automatically to the Inbox. There is an extension to do this, Filter Subfolders, but it's only for TB3. What I have tried so far is: Use the FiltaQuilla add-on to be able to filter messages for folder name. Set the string property mail.server.default.applyIncomingFilters to true. As recommended here: http://blog.mozilla.org/bcrowder/ But I can't get these filters to run automatically. I have a suspicion that filters only run automatically for incoming mail. And these are sent items. Perhaps that's it. I just don't know. On the other hand, if I run the filters manually on that folder, it does indeed move the mail. Or perhaps the issue is that these messages are saved into the Sent Items folder marked as read. Is it possible that filters are only automatically applied to unread items? If I could install an add-in that automatically ran the message filter on my folder, that would do it. Anyway, I'm at a loss now. Any suggestions are welcome. I'm not at all wedded to using filters. I just want to find a way to get these messages moved without human interaction!

    Read the article

  • Outside VPN traffic not able to ping site-to-site VPN remote site

    - by Siriss
    we have two ASA 5510s running 8.4 in a site-to-site VPN setup. All internal traffic is working smoothly. Site/Subnet A: 192.100.0.0 - local Site/Subnet B: 192.200.0.0 - remote VPN Users: 192.100.40.0 - assigned by ASA When you VPN into the network, all traffic hits Site A, and everything on subnet A is accessible. Site B however, is completely inaccessible for VPN users. All machines on subnet B, the firewall itself, etc... is not reachable by ping or otherwise. I know I am missing a NAT rule, and in 8.2, it was easy as pie to setup using ASDM, but now I can't get it for the life of me as 8.4 apparently made a lot of changes to NAT rules. I am not too comfortable in the ASA command line, but if there is a command I need to add or if you could direct me where I can add this in 8.4 ASDM I would really appreciate it. I have tired NAT Exempt, Static NAT, Static NAT Policies, etc... I think I tried all the options. I also might have my interfaces confused with the new look at feel of ASDM. Thank you much in advance and I hope I have been thorough enough.

    Read the article

  • How to list rpm packages/subpackages sorted by total size

    - by smci
    Looking for an easy way to postprocess rpm -q output so it reports the total size of all subpackages matching a regexp, e.g. see the aspell* example below. (Short of scripting it with Python/PERL/awk, which is the next step) (Motivation: I'm trying to remove a few Gb of unnecessary packages from a CentOS install, so I'm trying to track down things that are a) large b) unnecessary and c) not dependencies of anything useful like gnome. Ultimately I want to pipe the ouput through sort -n to what the space hogs are, before doing rpm -e) My reporting command looks like [1]: cat unwanted | xargs rpm -q --qf '%9.{size} %{name}\n' > unwanted.size and here's just one example where I'd like to see rpm's total for all aspell* subpackages: root# rpm -q --qf '%9.{size} %{name}\n' `rpm -qa | grep aspell` 1040974 aspell 16417158 aspell-es 4862676 aspell-sv 4334067 aspell-en 23329116 aspell-fr 13075210 aspell-de 39342410 aspell-it 8655094 aspell-ca 62267635 aspell-cs 16714477 aspell-da 17579484 aspell-el 10625591 aspell-no 60719347 aspell-pl 12907088 aspell-pt 8007946 aspell-nl 9425163 aspell-cy Three extra nice-to-have things: list the dependencies/depending packages of each group (so I can figure out the uninstall order) Also, if you could group them by package group, that would be totally neat. Human-readable size units like 'M'/'G' (like ls -h does). Can be done with regexp and rounding on the size field. Footnote: I'm surprised up2date and yum don't add this sort of intelligence. Ideally you would want to see a tree of group-package-subpackage, with rolled-up sizes. Footnote 2: I see yum erase aspell* does actually produce this summary - but not in a query command. [1] where unwanted.txt is a textfile of unnecessary packages obtained by diffing the output of: yum list installed | sed -e 's/\..*//g' > installed.txt diff --suppress-common-lines centos4_minimal.txt installed.txt | grep '>' and centos4_minimal.txt came from the Google doc given by that helpful blogger.

    Read the article

  • SSH session closing whilst virtualenv session stays open (I think)

    - by ing0
    I've been developing some sites using Flask recently (running on debian within a virtualenv), and when I am testing I can run it on a port, let's say post 5000. So I run the script like so: . env/bin/activate <- go into virtual environment python file.py <- run python script And I will be given this message: Running on http://0.0.0.0:5000/ So this all works great and I can access my site on this port fine. However... my rubbish ISP always does this thing where it resets something around 1am every morning. I have no idea what this is, everything runs like normal but I always get disconnected from any SSH sessions open. This leaves it running and all I can do is call: lsof -i Which will show me the process but if I kill it and then rerun it things get weird. The: Running on http://0.0.0.0:5000 message still shows but I cannot connect to it anymore. I've tried changing the port number and it seems the only thing that works is trying again later on or on another day. Now I'm assuming that something on my server resets inbetween these times and I would like to think it was maybe that virtualenv session timing out, but I cannot find out how to do this manually, does anyone know?

    Read the article

  • upstart config to start sync daemon as non-root user

    - by Rudiger Wolf
    I am planning to use inosync to sync data from master server to several client servers. I have created a user called rsyncuser in both master and slaves with access permissions and passwordless ssh access from master to slave servers. Inosync is working when I use it from the command line as rsyncuser. Next I want this to start automatically when server is turned on. I figured upstart is the way to get this working. I am unable to find the right upstart command to get this working. Here is my upstart conf file. The problem seems to be around running "inosync -d -c /etc/inosync/inosync_rsyncuser.py" as a given user. As you can see I have tried a number of various options! description "start inosync to sync data to other CDN Servers as rsyncuser" console output #start on startup #stop on shutdown start on (net-device-up and local-filesystems) stop on runlevel [016] #start on runlevel [2345] #stop on runlevel [!2345] #kill timeout 30 env RUN_AS_USER=rsyncuser expect fork script echo "Inosync updtart job seems to have started" /tmp/upstart.log # exec sudo -u rsyncuser -c "ls -la" /tmp/upstart.log 2&1 # LOGFILE=/var/log/logfile.`date +%Y-%m-%d`.log # exec su - $RUN_AS_USER -c "inosync -d -c /etc/inosync/inosync_rsyncuser.py" $LOGFILE 2&1 # exec su -c "ls -la" /tmp/upstart.log 2&1 # emit inosync_running end script

    Read the article

  • linked-server sql - access

    - by user22121
    Hi, I have a SQL server 2000 and an Access database mdb connected by Linked server on the other hand I have a program in c # that updates data in a SQL table (Users) based data base access. When running my program returns the following error message: OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. Authentication failed. [OLE / DB provider returned message: Can not start the application. Missing information file of the working group or is opened exclusively by another user.] OLE DB error trace [OLE / DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize:: Initialize returned 0x80040E4D: Authentication failed.] . Both the program, the sql server and database access are on a remote server. On the local server the problem was solved by running the following: "sp_addlinkedsrvlogin 'ActSC', 'false', NULL, 'admin', NULL". Try on the remote server the next, without result: "sp_addlinkedsrvlogin 'ActSC', true, null, 'user', 'pass'". On the remote server and from the "Query Analyzer" sql update statements are working correctly. Can you think of what may be the problem? Thanks!

    Read the article

  • "A disk read error occurred" when booting XP disk image in VirtualBox

    - by intuited
    I'm trying to boot an XP installation cloned into VirtualBox from a real drive. I'm getting the message A disk read error occurred Press Ctrl+Alt+Del to restart whenever* I try to boot the machine. * This is not strictly true: with AMD-V enabled, the boot process appears to not make it this far and instead hangs at a black screen with cursor. I created the VirtualBox image from the original drive using the following method: $ sudo ddrescue -n /dev/sdd sdd.img logfile # completed without errors $ VBoxManage convertfromraw sdd.img disk.vdi The original disk (and the image) contain a single NTFS partition with XP installed on it. The owner of the drive indicates that it did boot okay the last time the system made it that far. The (Pentium 4) system has a broken (enormous) heat sink, so at some point it failed to boot because it would quickly overheat and shut down. If I boot the VM from a live cd, I am able to mount its /dev/sda1 without any problems. I ran ntfsfix and didn't have any luck. I've read through the instructions on doing this. I didn't really follow them. For example, I didn't run MergeIDE before imaging because the machine was not bootable. However, the symptom of that problem seems to be quite different. The emitted message is contained in the volume boot record of the XP partition, which leads me to suspect that this is a problem with the core operating system bootstrap procedure, and not related to anything in the registry. I don't have an XP boot CD.

    Read the article

  • BSOD trying to migrate Windows XP from a physical to a virtual machine

    - by pauldoo
    I am attempting to migrate a Windows XP Home installation from a physical machine to a virtual machine. The physical machine has two hard disks; the first is 250GB containing the "C:", the second is 1TB containing "D:". I'd like to create a new virtual machine stored on the D:, which is a copy of the Windows XP Home installation that is currently on the C:. (This will leave the 250GB drive clear for me to install a fresh copy of Windows 7, and still be able to access the old XP installation if necessary.) The first method I tried was to follow the instructions here: http://www.virtualbox.org/wiki/Migrate_Windows I booted up from an Ubuntu Live CD in order to execute the Linux commands whilst the Windows system wasn't running. With this method the virtual machine would always blue screen on startup with a "STOP 0x0000007B" message. The instructions above say to try a "repair install" using the Windows XP disc. Unfortunately for me my XP disc is scratched and will not boot so I was unable to try a repair install. The second method I tried was to use "VMWare Converter Standalone Client". This tool executed without any errors, but again produced a virtual machine that blue screens on startup with the same "STOP" message. Are there any other methods to move the Windows XP installation into a virtual machine? I think next I will try some more manual process to create the cloned virtual machine. I think I will try installing a fresh copy of Windows XP to a virtual machine, then once that is booting OK I will ntfsclone the source C: partition over the top. Perhaps this will fix the booting problems if the issue is related to the MBR or partition table in some way.

    Read the article

  • How should secret files be pushed to an EC2 (on AWS) Ruby on Rails application?

    - by nikc
    How should secret files be pushed to an EC2 Ruby on Rails application using amazon web services with their elastic beanstalk? I add the files to a git repository, and I push to github, but I want to keep my secret files out of the git repository. I'm deploying to aws using: git aws.push The following files are in the .gitignore: /config/database.yml /config/initializers/omniauth.rb /config/initializers/secret_token.rb Following this link I attempted to add an S3 file to my deployment: http://docs.amazonwebservices.com/elasticbeanstalk/latest/dg/customize-containers.html Quoting from that link: Example Snippet The following example downloads a zip file from an Amazon S3 bucket and unpacks it into /etc/myapp: sources: /etc/myapp: http://s3.amazonaws.com/mybucket/myobject Following those directions I uploaded a file to an S3 bucket and added the following to a private.config file in the .elasticbeanstalk .ebextensions directory: sources: /var/app/current/: https://s3.amazonaws.com/mybucket/config.tar.gz That config.tar.gz file will extract to: /config/database.yml /config/initializers/omniauth.rb /config/initializers/secret_token.rb However, when the application is deployed the config.tar.gz file on the S3 host is never copied or extracted. I still receive errors that the database.yml couldn't be located and the EC2 log has no record of the config file, here is the error message: Error message: No such file or directory - /var/app/current/config/database.yml Exception class: Errno::ENOENT Application root: /var/app/current

    Read the article

  • If spaces in filenames are possible, why do some of us still avoid using them?

    - by Chris W. Rea
    Somebody I know expressed irritation today regarding those of us who tend not to use spaces in our filenames, e.g. NamingThingsLikeThis.txt -- despite most modern operating systems supporting spaces in filenames. Non-technical people must look at filenames created by geeks and wonder where we learned English. So, what are the reasons that spaces in filenames are avoided or discouraged? The most obvious reason I could think of, and why I typically avoid it, are the extra quotes required on the command line when dealing with such files. Are there any other significant reasons, other than the practice being a vestigial preference? UPDATE: Thanks for all your answers! I'm surprised how popular this was. So, here's a summary: Six Reasons Why Geeks Prefer Filenames Without Spaces In Them It's irritating to put quotes around them when referenced on the command line (or elsewhere.) Some older operating systems didn't used to support them and us old dogs are used to that. Some tools still don't support spaces in filenames at all or very well. (But they should.) It's irritating to escape spaces when used where spaces must be escaped, such as URLs. Certain unenlightened services (e.g. file hosting, webmail) remove or replace spaces anyway! Names without spaces can be shorter, which is sometimes desirable as paths are limited.

    Read the article

  • Upgrading Visio 2000 to Visio 2007

    - by dirtside
    I have Microsoft Visio 2000 SR 1, and recently purchased Microsoft Office Visio Standard 2007 with the understanding (supported by the product info and some other research) that I'd be able to upgrade. However, when I install 2007, it tells me it can't find a previous install of Visio, but... it's right there! Here's the exact message: "Setup can't find a version of Microsoft Office on your computer. If Office is installed on a disk or network share, click the browse button to select the appropriate disk or share... (etc.)" No matter which directory or drive I pick (various Office installs, the old Visio install, various subdirectories) it gives the following message: "The path you have chosen does not point at a qualifying upgradeable product. Click 'Retry' to try again or 'Cancel' to quit setup." Any ideas? This is a legit copy of Visio 2007 (purchased from Amazon) and the copy of Visio 2000 is legit as well. I'm not sure what exactly the installer is looking for that it would consider a "qualifying upgradeable product". A specific file?

    Read the article

  • Active Directory Domain Services - Network Name Cannot be Found

    - by Arief
    I have really weird problem that I could not explain. I am trying to redirect all users home folder to the new server. I have copied all the files including the permissions to the new server. All I need to do is to update the user profile for home folder by changing the server name. However, I got this message when I enter the new server name: My server that serving as AD can resolve the name by ping and nslookup of the server name. The only thing that I don't understand why the MMC cannot resolve the name. I did change with the IP Address and I still get the same error message. Thank you so much for your help. UPDATE: I know what seems to be a problem, but I don't know how to fix it. The new server that will serve all Home folder is actually sitting in the cloud with different IP Address as the Domain Controller. The Domain Controller is sitting locally in the office with 10.0.0.0/24 IP Addresses. The new server that is sitting in on Data Centre is on 172.10.10.10/24 IP Addresses. The static route has been set up on both end, and the DNS as well. I believe this is the issue. Does anyone how to overcome this situation? Thank you.

    Read the article

  • IIS7 Compression CSS files only compressed when dynamic compression is enabled

    - by Paul
    If anyone can help it would be appreciated. I would like to enable compression for static files within IIS7 (for the sake of simplicity I'll just refer to static css files for the time being). The problem I'm getting is that css files are only compressed when both dynamic and static compression is enabled in IIS for the website. What I really want to achieve is css compression (static file) whilst leaving the dynamic (aspx) pages as uncompressed for the time being (to avoid unnecessary CPU load). I am puzzled as to why just leaving 'static compression' enabled causes css files to be returned uncompressed. My applicationHost.config file has not be altered and looks like this: <httpCompression directory="%SystemDrive%\inetpub\temp\IIS Temporary Compressed Files"> <scheme name="gzip" dll="%Windir%\system32\inetsrv\gzip.dll" /> <staticTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/javascript" enabled="true" /> <add mimeType="*/*" enabled="false" /> </staticTypes> <dynamicTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/x-javascript" enabled="true" /> <add mimeType="*/*" enabled="false" /> </dynamicTypes> </httpCompression> The server-wide compression setting within IIS is set to 'Dynamic Disabled' and 'Static Enabled' from the Server Features Compression page. The web-site compression setting (Server Sites MyWebsite Features Compression) is where I am enabling and disabling dynamic compression as detailed above. Any help would be really help me get unstuck on this. Thanks

    Read the article

  • Cannot run logwatch due to Date::Manip issue

    - by Quintin Par
    I tried to run logwatch at follows [root@machine cron.daily]# ./0logwatch ERROR: Date::Manip unable to determine TimeZone. Execute the following command in a shell prompt: perldoc Date::Manip The section titled TIMEZONES describes valid TimeZones and where they can be defined. My date is as follows root@machine cron.daily]# date Thu Aug 23 06:25:21 GMT 2012 Now based on details in various forums I tried to fix this by setting /etc/timezone to “+0800” but it didn’t work My /etc/localtime points to /usr/share/zoneinfo/GMT and is managed by puppet How do I go about fixing this? I still want all my machines to be in GMT timezone. EDIT: Sadly, Both the changes are not working: [root@machine cron.daily]# cat /etc/TIMEZONE UTC Quanta’s [root@machine cron.daily]# cat ~/.bash_profile # .bash_profile # Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi # User specific environment and startup programs PATH=$PATH:$HOME/bin export TZ=GMT export PATH [root@machine cron.daily]# source ~/.bash_profile [root@machine cron.daily]# ./0logwatch ERROR: Date::Manip unable to determine TimeZone. Execute the following command in a shell prompt: perldoc Date::Manip The section titled TIMEZONES describes valid TimeZones and where they can be defined.

    Read the article

  • VMware Workstation executes nonexisting and outdated File

    - by RED SOFT ADAIR-StefanWoe
    I execute a command line program from a VM (VMware 7.1.1) with Windows XP. The executable file is located on the host machine. If i start a command line in the VM, using a drive mounted as .host\SharedFolders i see the following: D:\projects\myProgram\WinRel>dir myProgram.exe 02.09.2010 21:15 245.760 myProgram.exe D:\projects\myProgram\WinRel>myProgram.exe Processing BuildFeb 26 2009 This is wrong! The whole execution of the program behaves like the version that is outdated more than one year! I triple checked that there is no confusion or anything If i start the Program on the host or if i even start it from the VM using a UNC Path, it shows the last build date and executes as expected: C:\>dir \\myMachine\drive_d\projects\myProgram\WinRel\myProgram.exe 02.09.2010 21:15 245.760 myProgram.exe C:\>\\myMachine\drive_d\projects\myProgram\WinRel\myProgram.exe Processing Build: Sep 2 2010 Can this behavior somehow be explained? There MUST be a cache for the host mounted drive. The program it executes does not exist anymore! If i remove it from the host, the VM can not execute it anymore. If i restore it, the behavior becomes the same again.

    Read the article

  • syslog-ng and nging logs to mysql

    - by Katafalkas
    So couple of days ago I asked how to log php and nginx logs to centralized MySQL database, and m0ntassar gave a perfect answer :) cheer ! The problem I am facing now is that I can not seem to get it working. syslog-ng version: # syslog-ng --version syslog-ng 3.2.5 This is my nginx log format: log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; syslog-ng source: source nginx { file( "/var/log/nginx/tg-test-3.access.log" follow_freq(1) flags(no-parse) ); }; syslog-ng destination: destination d_sql { sql(type(mysql) host("127.0.0.1") username("syslog") password("superpasswd") database("syslog") table("nginx") columns("remote_addr","remote_user","time_local","request","status","body_bytes_sent","http_ referer","http_user_agent","http_x_forwarded_for") values("$REMOTE_ADDR", "$REMOTE_USER", "$TIME_LOCAL", "$REQUEST", "$STATUS","$BODY_BYTES_SENT", "$HTTP_REFERER", "$HTTP_USER_AGENT", "$HTTP_X_FORWARDED_FOR")); }; MySQL table for testing purposes: CREATE TABLE `nginx` ( `remote_addr` varchar(100) DEFAULT NULL, `remote_user` varchar(100) DEFAULT NULL, `time` varchar(100) DEFAULT NULL, `request` varchar(100) DEFAULT NULL, `status` varchar(100) DEFAULT NULL, `body_bytes_sent` varchar(100) DEFAULT NULL, `http_referer` varchar(100) DEFAULT NULL, `http_user_agent` varchar(100) DEFAULT NULL, `http_x_forwarded_for` varchar(100) DEFAULT NULL, `time_local` text, `datetime` text, `host` text, `program` text, `pid` text, `message` text ) ENGINE=InnoDB DEFAULT CHARSET=latin1 Now first thing that goes wrong is when I restart syslog-ng: # /etc/init.d/syslog-ng restart Stopping syslog-ng: [ OK ] Starting syslog-ng: WARNING: You are using the default values for columns(), indexes() or values(), please specify these explicitly as the default will be dropped in the future; [ OK ] I have tried creating a file destination and it all works fine, and then I have tried replacing my destination with: destination d_sql { sql(type(mysql) host("127.0.0.1") username("syslog") password("kosmodromas") database("syslog") table("nginx") columns("datetime", "host", "program", "pid", "message") values("$R_DATE", "$HOST", "$PROGRAM", "$PID", "$MSGONLY") indexes("datetime", "host", "program", "pid", "message")); }; Which did work and it was writing stuff to mysql, The problem is that I want to write stuff to in exact format as nginx log format is. I assume that I am missing something really simple or I need to do some parsing between source and destination. Any help will be much appreciated :)

    Read the article

  • org-sort multi: date/time (?d ?t) | priority (?p) | title (?a)

    - by lawlist
    Is anyone aware of an org-sort function / modification that can refile / organize a group of TODO so that it sorts them by three (3) criteria: first sort by due date, second sort by priority, and third sort by by title of the task? EDIT: I believe that org-sort by deadline (?d) has a bug that cannot properly handle undated tasks. I am working on a workaround (i.e., moving the undated todo to a different heading before the deadline (?d) sort occurs), but perhaps the best thing to do would be to try and fix the original sorting function. Development of the workaround can be found in this thread (i.e., moving the undated tasks to a different heading in one fell swoop): How to automate org-refile for multiple todo EDIT: Apparently, the following code (ancient history) that I found on the internet was eventually modified and included as a part of org-sort-entries. Unfortunately, undated todo are not properly sorted when sorting by deadline -- i.e., they are mixed in with the dated todo. ;; multiple sort (defun org-sort-multi (&rest sort-types) "Multiple sorts on a certain level of an outline tree, or plain list items. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Example: To sort first by TODO status, then by priority, then by date, then alphabetically (case-sensitive) use the following call: (org-sort-multi '(?d ?p ?t (t . ?a)))" (interactive) (dolist (x (nreverse sort-types)) (when (char-valid-p x) (setq x (cons nil x))) (condition-case nil (org-sort-entries (car x) (cdr x)) (error nil)))) ;; sort current level (defun lawlist-sort (&rest sort-types) "Sort the current org level. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Defaults to \"?o ?p\" which is sorted by TODO status, then by priority" (interactive) (when (equal mode-name "Org") (let ((sort-types (or sort-types (if (or (org-entry-get nil "TODO") (org-entry-get nil "PRIORITY")) '(?d ?t ?p) ;; date, time, priority '((nil . ?a)))))) (save-excursion (outline-up-heading 1) (let ((start (point)) end) (while (and (not (bobp)) (not (eobp)) (<= (point) start)) (condition-case nil (outline-forward-same-level 1) (error (outline-up-heading 1)))) (unless (> (point) start) (goto-char (point-max))) (setq end (point)) (goto-char start) (apply 'org-sort-multi sort-types) (goto-char end) (when (eobp) (forward-line -1)) (when (looking-at "^\\s-*$") ;; (delete-line) ) (goto-char start) ;; (dotimes (x ) (org-cycle)) ))))) EDIT: Here is a more modern version of multi-sort, which is likely based upon further development of the above-code: (defun org-sort-all () (interactive) (save-excursion (goto-char (point-min)) (while (re-search-forward "^\* " nil t) (goto-char (match-beginning 0)) (condition-case err (progn (org-sort-entries t ?a) (org-sort-entries t ?p) (org-sort-entries t ?o) (forward-line)) (error nil))) (goto-char (point-min)) (while (re-search-forward "\* PROJECT " nil t) (goto-char (line-beginning-position)) (ignore-errors (org-sort-entries t ?a) (org-sort-entries t ?p) (org-sort-entries t ?o)) (forward-line)))) EDIT: The best option will be to fix sorting of deadlines (?d) so that undated todo are moved to the bottom of the outline, instead of mixed in with the dated todo. Here is an excerpt from the current org.el included within Emacs Trunk (as of July 1, 2013): (defun org-sort (with-case) "Call `org-sort-entries', `org-table-sort-lines' or `org-sort-list'. Optional argument WITH-CASE means sort case-sensitively." (interactive "P") (cond ((org-at-table-p) (org-call-with-arg 'org-table-sort-lines with-case)) ((org-at-item-p) (org-call-with-arg 'org-sort-list with-case)) (t (org-call-with-arg 'org-sort-entries with-case)))) (defun org-sort-remove-invisible (s) (remove-text-properties 0 (length s) org-rm-props s) (while (string-match org-bracket-link-regexp s) (setq s (replace-match (if (match-end 2) (match-string 3 s) (match-string 1 s)) t t s))) s) (defvar org-priority-regexp) ; defined later in the file (defvar org-after-sorting-entries-or-items-hook nil "Hook that is run after a bunch of entries or items have been sorted. When children are sorted, the cursor is in the parent line when this hook gets called. When a region or a plain list is sorted, the cursor will be in the first entry of the sorted region/list.") (defun org-sort-entries (&optional with-case sorting-type getkey-func compare-func property) "Sort entries on a certain level of an outline tree. If there is an active region, the entries in the region are sorted. Else, if the cursor is before the first entry, sort the top-level items. Else, the children of the entry at point are sorted. Sorting can be alphabetically, numerically, by date/time as given by a time stamp, by a property or by priority. The command prompts for the sorting type unless it has been given to the function through the SORTING-TYPE argument, which needs to be a character, \(?n ?N ?a ?A ?t ?T ?s ?S ?d ?D ?p ?P ?o ?O ?r ?R ?f ?F). Here is the precise meaning of each character: n Numerically, by converting the beginning of the entry/item to a number. a Alphabetically, ignoring the TODO keyword and the priority, if any. o By order of TODO keywords. t By date/time, either the first active time stamp in the entry, or, if none exist, by the first inactive one. s By the scheduled date/time. d By deadline date/time. c By creation time, which is assumed to be the first inactive time stamp at the beginning of a line. p By priority according to the cookie. r By the value of a property. Capital letters will reverse the sort order. If the SORTING-TYPE is ?f or ?F, then GETKEY-FUNC specifies a function to be called with point at the beginning of the record. It must return either a string or a number that should serve as the sorting key for that record. Comparing entries ignores case by default. However, with an optional argument WITH-CASE, the sorting considers case as well." (interactive "P") (let ((case-func (if with-case 'identity 'downcase)) (cmstr ;; The clock marker is lost when using `sort-subr', let's ;; store the clocking string. (when (equal (marker-buffer org-clock-marker) (current-buffer)) (save-excursion (goto-char org-clock-marker) (looking-back "^.*") (match-string-no-properties 0)))) start beg end stars re re2 txt what tmp) ;; Find beginning and end of region to sort (cond ((org-region-active-p) ;; we will sort the region (setq end (region-end) what "region") (goto-char (region-beginning)) (if (not (org-at-heading-p)) (outline-next-heading)) (setq start (point))) ((or (org-at-heading-p) (condition-case nil (progn (org-back-to-heading) t) (error nil))) ;; we will sort the children of the current headline (org-back-to-heading) (setq start (point) end (progn (org-end-of-subtree t t) (or (bolp) (insert "\n")) (org-back-over-empty-lines) (point)) what "children") (goto-char start) (show-subtree) (outline-next-heading)) (t ;; we will sort the top-level entries in this file (goto-char (point-min)) (or (org-at-heading-p) (outline-next-heading)) (setq start (point)) (goto-char (point-max)) (beginning-of-line 1) (when (looking-at ".*?\\S-") ;; File ends in a non-white line (end-of-line 1) (insert "\n")) (setq end (point-max)) (setq what "top-level") (goto-char start) (show-all))) (setq beg (point)) (if (>= beg end) (error "Nothing to sort")) (looking-at "\\(\\*+\\)") (setq stars (match-string 1) re (concat "^" (regexp-quote stars) " +") re2 (concat "^" (regexp-quote (substring stars 0 -1)) "[ \t\n]") txt (buffer-substring beg end)) (if (not (equal (substring txt -1) "\n")) (setq txt (concat txt "\n"))) (if (and (not (equal stars "*")) (string-match re2 txt)) (error "Region to sort contains a level above the first entry")) (unless sorting-type (message "Sort %s: [a]lpha [n]umeric [p]riority p[r]operty todo[o]rder [f]unc [t]ime [s]cheduled [d]eadline [c]reated A/N/P/R/O/F/T/S/D/C means reversed:" what) (setq sorting-type (read-char-exclusive)) (and (= (downcase sorting-type) ?f) (setq getkey-func (org-icompleting-read "Sort using function: " obarray 'fboundp t nil nil)) (setq getkey-func (intern getkey-func))) (and (= (downcase sorting-type) ?r) (setq property (org-icompleting-read "Property: " (mapcar 'list (org-buffer-property-keys t)) nil t)))) (message "Sorting entries...") (save-restriction (narrow-to-region start end) (let ((dcst (downcase sorting-type)) (case-fold-search nil) (now (current-time))) (sort-subr (/= dcst sorting-type) ;; This function moves to the beginning character of the "record" to ;; be sorted. (lambda nil (if (re-search-forward re nil t) (goto-char (match-beginning 0)) (goto-char (point-max)))) ;; This function moves to the last character of the "record" being ;; sorted. (lambda nil (save-match-data (condition-case nil (outline-forward-same-level 1) (error (goto-char (point-max)))))) ;; This function returns the value that gets sorted against. (lambda nil (cond ((= dcst ?n) (if (looking-at org-complex-heading-regexp) (string-to-number (match-string 4)) nil)) ((= dcst ?a) (if (looking-at org-complex-heading-regexp) (funcall case-func (match-string 4)) nil)) ((= dcst ?t) (let ((end (save-excursion (outline-next-heading) (point)))) (if (or (re-search-forward org-ts-regexp end t) (re-search-forward org-ts-regexp-both end t)) (org-time-string-to-seconds (match-string 0)) (org-float-time now)))) ((= dcst ?c) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward (concat "^[ \t]*\\[" org-ts-regexp1 "\\]") end t) (org-time-string-to-seconds (match-string 0)) (org-float-time now)))) ((= dcst ?s) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward org-scheduled-time-regexp end t) (org-time-string-to-seconds (match-string 1)) (org-float-time now)))) ((= dcst ?d) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward org-deadline-time-regexp end t) (org-time-string-to-seconds (match-string 1)) (org-float-time now)))) ((= dcst ?p) (if (re-search-forward org-priority-regexp (point-at-eol) t) (string-to-char (match-string 2)) org-default-priority)) ((= dcst ?r) (or (org-entry-get nil property) "")) ((= dcst ?o) (if (looking-at org-complex-heading-regexp) (- 9999 (length (member (match-string 2) org-todo-keywords-1))))) ((= dcst ?f) (if getkey-func (progn (setq tmp (funcall getkey-func)) (if (stringp tmp) (setq tmp (funcall case-func tmp))) tmp) (error "Invalid key function `%s'" getkey-func))) (t (error "Invalid sorting type `%c'" sorting-type)))) nil (cond ((= dcst ?a) 'string<) ((= dcst ?f) compare-func) ((member dcst '(?p ?t ?s ?d ?c)) '<))))) (run-hooks 'org-after-sorting-entries-or-items-hook) ;; Reset the clock marker if needed (when cmstr (save-excursion (goto-char start) (search-forward cmstr nil t) (move-marker org-clock-marker (point)))) (message "Sorting entries...done"))) (defun org-do-sort (table what &optional with-case sorting-type) "Sort TABLE of WHAT according to SORTING-TYPE. The user will be prompted for the SORTING-TYPE if the call to this function does not specify it. WHAT is only for the prompt, to indicate what is being sorted. The sorting key will be extracted from the car of the elements of the table. If WITH-CASE is non-nil, the sorting will be case-sensitive." (unless sorting-type (message "Sort %s: [a]lphabetic, [n]umeric, [t]ime. A/N/T means reversed:" what) (setq sorting-type (read-char-exclusive))) (let ((dcst (downcase sorting-type)) extractfun comparefun) ;; Define the appropriate functions (cond ((= dcst ?n) (setq extractfun 'string-to-number comparefun (if (= dcst sorting-type) '< '>))) ((= dcst ?a) (setq extractfun (if with-case (lambda(x) (org-sort-remove-invisible x)) (lambda(x) (downcase (org-sort-remove-invisible x)))) comparefun (if (= dcst sorting-type) 'string< (lambda (a b) (and (not (string< a b)) (not (string= a b))))))) ((= dcst ?t) (setq extractfun (lambda (x) (if (or (string-match org-ts-regexp x) (string-match org-ts-regexp-both x)) (org-float-time (org-time-string-to-time (match-string 0 x))) 0)) comparefun (if (= dcst sorting-type) '< '>))) (t (error "Invalid sorting type `%c'" sorting-type))) (sort (mapcar (lambda (x) (cons (funcall extractfun (car x)) (cdr x))) table) (lambda (a b) (funcall comparefun (car a) (car b))))))

    Read the article

  • How often is CRL refreshed, and how to force it to be?

    - by lockstock
    I have a web service running under IIS 7 that requires an X509 client certificate. I know that the server that it rus on needs access to DigiCert.com in order to be able to get the CRL (Certificate Revocation List). There is a need to change our proxy so I am attempting to investigate the impact of doing so. I have removed the global proxy settings using the command netsh winhttp proxy refesh, and also deleted the CRL cache using the command certutil -URLcache CRL delete. However, after doing this, all calls to the web service still succeed. This suggests to me that I am missing something here. So; If the CRL cache is cleared and the server has no way of refreshing the CRL, why do web service requets not return http 403?. I have been unable to find adequate information from googling nor from my colleagues. The reason I want it to fail is that I will not be confident that the new proxy settings work until I can see it broken first, if that makes sense. I would also like to be able to force the CRL to be refeshed in order to ensure that the new proxy settings work

    Read the article

  • Configuring vsftpd with nginx on Ubuntu 12.04 LTS

    - by arby
    I've attempted to configure a nginx / vsftpd server on Ubuntu 12.04 LTS (via amazon ec2) a couple times now, but I seem to keep making a mistake along the way. Currently, when I try to connect to my ftp server it takes a minute or so before it connects. Then when I issue a command, they all timeout with an operation failed error. Aside from these issues, I'm not completely confident with the file ownership & permissions or the configuration / settings. So, I think it's best if I just re-install and re-configure correctly. I believe the nginx installation comes with a default user of www-data:www-data and web root directory ownership by root:root. Vsftpd, however, needs to have a user created with the same group as the nginx user (www-data), and the same home directory as the nginx server (/usr/share/nginx/www), with g+w chmod permissions granted on that directory. The vsftpd.conf file should disable anonymous logins and enable local logins, file writing, and chroot local users. In my previous config, I had /bin/false set for the ftp user's shell and pam_shells.so disabled. I also had local_umask set to 0027. So, starting with a fresh ec2 instance, I've got: sudo apt-get install vsftpd sudo apt-get install nginx For the firewall I issued the command (not sure if necessary): sudo ufw allow ftp Which commands / config is recommended from here? I only need 1 ftp user that I can use to login with my ftp client to modify the single nginx web domain, which will need php & sql for WordPress.

    Read the article

  • VMware virtual machine network devices malfunctioning

    - by sheepz
    I'm running Ubuntu 10.04 LTS and VMvware workstation 7.0.1 build-227600. The virtual machine i'm running in VMware is a custom distribution built on Debian Linux version 3.1. I'm still pretty much a beginner with UNIX administration. After having messed around with the vmware (changed only the name of the folder, the vmx and and other .v* files accordingly in which the .vmx was situated, and the configuration in the vmx file accordingly), the network devices on the virtual machine do not work anymore. The virtual machine is used for securely sending messages. The virtual machine: As far as I know, this perl file called proxy-gen-ifalias eth0 is responsible for properly setting up the two virtual network devices eth0 and eth1. The Virtual machine comes with a GUI interface in which I have set up two ethernet network devices, one internal, the other external. Now, after having messed around with this, the UI gives me this error message: perl proxy-gen-ifalias eth0 /etc/modprobe.d/alias-eth0 /sbin/update-modules perl proxy-gen-ifalias eth1 /etc/modprobe.d/alias-eth1 /sbin/update-modules ifdown eth0 ifdown: interface eth0 not configured ifdown eth1 ifdown: interface eth1 not configured perl proxy-gen-netcfg /etc/network/interfaces ifup eth0 SICCSIFADDR: No such device eth0: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device eth0: ERROR while getting interface flags: No such device Failed to bring up eth0. ifconfig eth0 eth0: error fetching interface information: Device not found make: *** [/etc/network/interfaces] Error 1 ~ Here are the contents of the two perl files referred to in the message: paste.pocoo.org/show/2AMzAYhoCRZqlGY7wUFk/ proxy-gen-netcfg

    Read the article

  • configuring vsftpd anonymous upload. Creates files but freezes at 0 bytes

    - by Wayne
    vsftpd on ubuntu after sudo apt-get install vsftpd Then did configuration as in the attached /etc/vsftpd.conf file. Anonymous ftp allows cd to the upload directly and allows put myfile.txt which gets created on the server but then the client hangs and never proceeds. The file on the server remains at 0 bytes. Here's the folders and permissions: root@support:/home/ftp# ls -ld . drwxr-xr-x 3 root root 4096 Jun 22 00:00 . root@support:/home/ftp# ls -ld pub drwxr-xr-x 3 root root 4096 Jun 21 23:59 pub root@support:/home/ftp# ls -ld pub/upload drwxr-xr-x 2 ftp ftp 4096 Jun 22 00:06 pub/upload root@support:/home/ftp# Here's the vsftpd.conf file: root@support:/home/ftp# grep -v '#' /etc/vsftpd.conf listen=YES anonymous_enable=YES write_enable=YES anon_upload_enable=YES dirmessage_enable=YES xferlog_enable=YES anon_root=/home/ftp/pub/ connect_from_port_20=YES chown_uploads=YES chown_username=ftp nopriv_user=ftp secure_chroot_dir=/var/run/vsftpd pam_service_name=vsftpd rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key Here's a file example that attempted to upload: root@support:/home/ftp/pub/upload# ls -l total 0 -rw------- 1 ftp nogroup 0 Jun 22 00:06 build.out This is the client attempting to upload...it is frozen at this point: $ ftp 173.203.89.78 Connected to 173.203.89.78. 220 (vsFTPd 2.0.6) User (173.203.89.78:(none)): ftp 331 Please specify the password. Password: 230 Login successful. ftp> put build.out 200 PORT command successful. Consider using PASV. 553 Could not create file. ftp> cd upload 250 Directory successfully changed. ftp> put build.out 200 PORT command successful. Consider using PASV. 150 Ok to send data.

    Read the article

  • Sendmail Sends but never Delivers

    - by Jeremy
    I have tried 10 different emails hosted at Google, Yahoo!, GoDaddy, and some that are privately hosted, and each time I get the following errors. I have blocked sensitive information, but you will be able to see the errors. Feb 16 17:06:50 xxxxx sendmail[31824]: o1GM6ovJ031824: [email protected], ctladdr=www-data (33/33), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30054, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (o1GM6oJo031825 Message accepted for delivery) Feb 16 16:54:19 xxxxx sendmail[31625]: o1GLsJPP031625: [email protected], ctladdr=www-data (33/33), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30097, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (o1GLsJah031626 Message accepted for delivery) Feb 17 09:05:52 xxxxx sm-mta[10620]: o1H6Z3jM005734: to=<[email protected]>, ctladdr=<[email protected]> (33/33), delay=07:30:49, xdelay=01:15:36, mailer=esmtp, pri=571331, relay=aspmx3.googlemail.com. [209.85.222.4], dsn=4.0.0, stat=Deferred: Connection timed out with aspmx3.googlemail.com. Feb 17 10:35:23 xxxxx sm-mta[12828]: o1HEZwn8011833: to=<[email protected]>, ctladdr=<[email protected]> (33/33), delay=00:59:25, xdelay=00:12:36, mailer=esmtp, pri=300353, relay=aln-mailrelay.att.net. [12.102.252.75], dsn=4.0.0, stat=Deferred: Connection timed out with aln-mailrelay.att.net. If you take a look, they all send, but then (HOURS later) I get an error "stat=Deferred: Connection timed out with {server}". I'm at my wits end, because I use this same setup on each of my servers, and they all work.

    Read the article

  • Troubleshooting certificate issues

    - by Weezy
    I'm trying to access my (European Parliament) Webmail from a Linux/Firefox machine at the following address and I get security warning messages explaining that the identity of the site cannot be verified (the error message is in french). But this only happens with Linux/Firefox from one machine. Here's the address: https://webmail.europarl.europa.eu/ (and I'm trying to access it from my home, not from the EP). And here's the detailed error message: webmail.europarl.europa.eu utilise un certificat de sécurité invalide. Le certificat n'est pas sûr car l'autorité délivrant le certificat est inconnue. (Code d'erreur : sec_error_unknown_issuer) So basically, if I translate, it is telling that the webmail.europarl.europa.eu certificate is invalid because the authority that delivered the certificate is unknown. I do only get this invalid certificate thing on Linux/Firefox. From a MacBookPro running Safari, I go to what looks like the correct webmail login page. From the same Linux machine, but using another user account and Chrome instead of Firefox, I go to what looks like the correct webmail login page. So there are several possibilities, here are a few ones: Firefox is right and my Linux box has been hacked Firefox is right and detecting something that neither Chrome nor Safari is detecting (like, say, my router that may be hacked) Safari on the MacBook Pro and Chrome on Linux are both correct and it is just Firefox on Linux that is wrongly stressing me when everything is normal. How do I know which one of these possibilities (or any other) is correct? How can I troubleshoot what is going on with either Linux/Firefox or with the parliament's webmail?

    Read the article

  • Slow transfer speed between two servers

    - by Linux Guy
    I have two servers both network cards speed is 10Gbps The inbound bandwidth between two servers is 10Gbps , the outbound bandwidth internet bandwidth is 500Mpbs Both servers using public ip addresses in public and private network Both servers transfer and connection on nginx port , and the server B used for streaming media , like youtube stream videos I check the transfer speed using iperf utility From Server A to Server B # iperf -c 0.0.0.1 -p 8777 ------------------------------------------------------------ Client connecting to 0.0.0.1, TCP port 8777 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 3] local 0.0.0.0 port 38895 connected with 0.0.0.1 port 8777 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.8 sec 528 KBytes 399 Kbits/sec My Current Connections in Server B # netstat -an|grep ":8777"|awk '/tcp/ {print $6}'|sort -nr| uniq -c 2072 TIME_WAIT 28 SYN_RECV 1 LISTEN 189 LAST_ACK 139 FIN_WAIT2 373 FIN_WAIT1 3381 ESTABLISHED 34 CLOSING Server A Network Card Information Settings for eth0: Supported ports: [ TP ] Supported link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 10000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: external Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes Server B Network Card Information Settings for eth2: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: Direct Attach Copper PHYAD: 0 Transceiver: external Auto-negotiation: off Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes The problem is : as you can see from iperf utility, the transfer speed from server A to server B slow when i restart network service the connection will be ok , after 2 minutes , it's getting slow How could i troubleshoot slow speed issue and fix it in server B ? Notice : if there any other commands i should execute in servers for more information, so it might help resolve the problem , let me know in comments

    Read the article

  • Drop database on DB2 9.5 - SQL1035N The database is currently in use

    - by Tommy
    I've never got this working the first time, but now I can't seem to do i at all. There is a connection pool somewhere using the database, so trying to drop the database when an application is using the database should give this error. The problem is there are no connection to the database when I issue these commands: db2 connect to mydatabase db2 quiesce database immediate force connections db2 connect reset db2 drop database mydatabase This allways give: SQL1035N The database is currently in use. SQLSTATE=57019 running this command shows no connections/applications DB2 list applications I can even deactivate the database, but still can't drop it. db2 => deactivate database mydatabase DB20000I The DEACTIVATE DATABASE command completed successfully. db2 => drop database mydatabase SQL1035N The database is currently in use. SQLSTATE=57019 db2 => Anyone got any clues? I'm running the cmd-windows as the local administrator (windows 2008) and this is also the admin for DB2. The connectionpool-user cannot connect during quiesce-state.

    Read the article

< Previous Page | 563 564 565 566 567 568 569 570 571 572 573 574  | Next Page >