Search Results

Search found 27777 results on 1112 pages for 'display manager'.

Page 567/1112 | < Previous Page | 563 564 565 566 567 568 569 570 571 572 573 574 | Next Page >

"Unable to install GRUB in /dev/sda" when installing GRUB

- by vicban3d

I recently bought a shiny new Lenovo Yoga 2 Pro and I want to dual boot it with Ubuntu for studying purposes. Its built-in OS is Windows 8.1 and it has a 256GB SSD. I've made a separate 90GB partition just for Ubuntu and a live USB to install it. The first time everything seemed to work great, I solved the wifi issued by blacklisting ideapad_laptop, the installation went flawlessly and Ubuntu worked fine. When I got up the next morning and turned on my laptop it booted into Windows right away without ever showing the GRUB menu. So I tried to reset, and checked my partitions with the Disk Manager and everything looked fine. Since I couldn't find a solution online I went ahead and formatted the partition to try and install again. This time and every time since, the installation was aborted and I got a fatal error saying: Unable to install GRUB in /dev/sda Executing `grub-install /dev/sda` failed. This is a fatal error. Can anyone please suggest a solution to this problem? If any further information is needed I would be happy to provide it. Thanks. When installing I get the following in details: ubuntu kernel: [ 1946.372741] FAT-fs (sda2): error, fat_get_cluster: invalid cluster chain (i_pos 0). ubuntu grub-installer: error: Running 'grub-install --force failed.

Read the article
Offshoring: does it ever work?

- by DanSingerman

I know there has been a fair amount of discussion on here about outsourcing/offshoring, and the general opinion seems to be that at best it is difficult, and at worst it fails. I have direct experience of offshoring myself; a previous company where I was a dev manager wanted to send some development offshore, and we ran a pilot scheme to see how well it would work. Of course it was a complete failure, although it is not completely clear to me whether this was down to the offshore devs being less talented, the process, or other factors (no doubt it was really a combination). I can see as a business how offshoring looks attractive (much lower day rate), but as far as I can see, the only way it could possibly work is if you do exceptionally detailed design up front, with incredibly detailed specifications; and by the time you have invested in producing that, you have probably spent as nearly as much as if you had written the actual code locally (which I think is an instance of No Silver Bullet) So, what I want to know is, does anyone here have any experience of offshoring actually working ever? Especially if there are any success stories of it working in a semi-agile way? I know there are developers here from all over the World; has anyone worked on an offshore project they consider successful?

Read the article
My computer will not reboot after fresh install of ubuntu 12.04LTS

- by user170715

I bought a new computer yesterday and it came with Windows 8. When installing Ubuntu, i choose the erase and install option thinking that Ubuntu would install easily like it did for my old laptop... After a successful install and following the instructions telling me to reboot to finish installation and remove installation media. It worked and my computer booted fine, however once I began installing updates via update manager and activating additional driver {ATI/AMD proprietary FGLRX graphics driver (post-release updates)} out of the following: Experimental AMD binary Xorg driver and kernel module ATI/AMD proprietary FGLRX graphics driver (*experimental*beta) ATI/AMD proprietary FGLRX graphics driver (post-release updates) Then reboot to finish making changes I reboot and get an error (Reboot and select proper boot device) At this point I was stuck, so I eventually reinstalled ubuntu and repeated the exacted same steps until right before i rebooted to finish making changes. However this time i used this Boot Repair tool sudo add-apt-repository ppa:yannubuntu/boot-repair sudo apt-get update sudo apt-get install -y boot-repair boot-repair After running the program i get a "boot successfully repaired" message. Then I try to reboot again and get the GNU Grub screen where it says would you like to boot: normal recovery memorytest Once it begins loading, you see the code moving across the screen then it pauses when it gets to and doesnt do anything. If someone could tell me how to fix this or get Windows 8 back soon, I'd appreciate it because like i said i just bought it yesterday and now i cant even use it.

Read the article
How important is Domain knowledge vs. Technical knowledge?

- by Mayank

I am working on a Trading and Risk Management application and although from a C# background, I have been asked to work on SSIS packages. Now I can live with that. The pain point is that there is too much emphasis on business understanding. Trading (Energy Trading to be exact) is a HUGE area and understanding every little bit of it is overwhelming. But for the past two months I have been working on understanding the business terms - Mark To Market, Risk Metrics, Positions, PnL, Greeks, Instruments, Book Structure... every little detail (you get the point). Now IMHO, this is the job of a BA. Sure it is very important for developers to understand the business but where do you draw the line? When I talked to my manager about this, he almost mocked me by saying that anybody can learn a technology in a week. It's the business that's harder. My long term aspiration is to remain on the technical side, probably become an architect (if possible). If I wanted to focus so much on business I would have pursued an MBA! I want to know if I am wrong or too naive in understanding the business importance or is my frustration justified?

Read the article
ArchBeat Link-o-Rama for October 23, 2013

- by OTN ArchBeat

Virtual Dev Day: Oracle ADF Development - Web, Mobile, and Beyond This free virtual event includes technical sessions that range from introductory to deep dive, covering Oracle ADF and Oracle ADF Mobile. Multiple tracks cover every interest and every level and include live online Q&A for answers to your technical questions. Register now! Americas: Tuesday, November 19, 9am-1pm PT / 12pm-4pm ET / 1pm-5pm BRT APAC: Thursday, November 21, 10am–1:30pm IST (India) / 12:30pm–4pm SGT (Singapore) / 3:30pm–7pm AESDT EMEA: Tuesday, November 26, 9am-1pm GMT / 1pm-5pm GST/ 2:30pm-6:30pm IST A Roadmap for SOA Development and Delivery | Mark Nelson Do you know the way to S-O-A? Mark Nelson does. His latest blog post, part of an ongoing series, will help to keep you from getting lost along the way. Updated ODI Statement of Direction | Robert Schweighardt Heads up Oracle Data Integrator fans! A new product statement of direction document is available, offering "an overview of the strategic product plans for Oracle’s data integration products for bulk data movement and transformation, specifically Oracle Data Integrator (ODI) and Oracle Warehouse Builder (OWB)." Java-Powered Robot Named NAO Wows Crowds | Tori Wieldt Java community manager Tori Wieldt interviews a robot and human. Nordic OTN Tour 2013 | Lonneke Dikmans Oracle ACE Director Lonneke Dikmans checks in from the Stockholm leg of the Nordic OTN Tour for 2013, sponsored by the Danish Oracle User Group and featuring fellow ACE Directors Tim Hall and Sten Vesterli, plus local speakers at various stops. Lonneke's post include the slides from three of the presentations. Thought for the Day "Some people approach every problem with an open mouth." — Adlai E. Stevenson23rd Vice President of the United States (October 23, 1835 – June 14, 1914) Source: brainyquote.com

Read the article
How to adjust the appearance of the Unity in 12.10?

- by piedro

Now I updated to 12.10 and would like to adjust the desktop, well unity, appearance. I know there is the theme setting, but I cannot adjust the symbol theme or windows decoration with the systemsettings. I used to use the tool "unsettings" but it doesn't work with 12.10 anymore. Ubuntu Tweak used to be an option but at this point many features are broken and a lot of settings seem to mess up my system or they don't change anything at all (I understand that there has been a design settings change - gsettings, dconf, something ...) myunity has some options to change stuff but I couldn't find it for 12.10 ... not to forget "gnome-tweak-tool" which seems to work for most settings but not for all, e.g. it doesn't change the mouse cursor and the windows decorations do not show some decorations I'd like to use and I am also afraid of messing things up because it is supposed to be used in gnomeshell ... actually as I found out right now it really messes things up: fonts get inverted, suddenly high contrast accessibility setings are used in some windows, nautilus has white fonts on white background and even the login manager is a mess now ... So: How can I adjust the theme, symbol, decorations, fonts for the normal user and for the desktop and for the applications including the applications started as sudo user? I should mention that I upgraded from 12.04 and that some applications like synaptic completely ignore any settings ... sadly it is a mess, there was a time when gnome theming was really well done and very adjustable, I wonder what happened ... Just now I read that further development of Ubuntu Tweak has been stopped. The developer announced that he won't go any further with the software and the online services ... That is sad and destroys my hope for easy appearance editing just by waiting ... has been such a nice tool for 12.04 ... r.i.p.

Read the article
I can't enable extra effects in Ubuntu 10.10. Please help?

- by jasoncruz98

I installed Ubuntu 10.10 alongside Ubuntu 11.10 to use an older version of Compiz. On Ubuntu 11.10, Compiz was enabled by default and I didn't need to use any graphics driver to enjoy the effects. All I had to do was install CompizConfig Settings Manager and enable those extra effects. That was Compiz 0.9.6. Now, after installing Ubuntu 10.10, when I first logged in, the graphics were slow. When I dragged a window from one end of the screen to the other, the whole screen would blur up and pixelate and it would be very laggy. I tried going to System Preference Appearance and selecting Extra effects on the Visual effects tab, but all I got was "Desktop effects could not be enabled". I don't know whether I should install the Additional drivers (proprietary) because my Internet is slow and it would take a long time. Furthermore, in Ubuntu 11.10, after I installed the proprietary graphics driver, I immediately went into fallback mode and wasn't even offered an option to set my desktop session to Ubuntu 3D. I didn't need the driver to run Compiz in Ubuntu 11.10, it just ran so smoothly. But in Ubuntu 10.10, everything is so laggy. Should I install the ATI/AMD Proprietary FGLRX Graphics Driver for Ubuntu 10.10 to enable extra effects? Or is there something else wrong with my system? Here is the output of lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation Sandy Bridge Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:6760] Here is the output of the same command, but in Ubuntu 11.10 (in this case the one which is correct, because I don't have the Sandy Bridge Integrated graphics controller) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] [1002:6760]

Read the article
One monitor getting spilled over into other monitor: how to do a 100% reset of gnome graphics configuration

- by Paul Nathan

I had to kill a VMWare process and afterwards, my monitor's configuration is buggy. I have 2 monitors in a side-by-side configuration. My right-hand monitor is the secondary monitor. Upon its right-hand side there are about 50 pixels showing from the left side of the lefthand monitor (ie, as if it was wrapped around). Further, my mouse clicks are registering as about 50 pixels sideways from where they should be. It's as if those 50 pixels between monitors got gobbled. What have I done? I've reset the screen configuration in multiple ways, using xrandr, multiple monitors app, etc. This persists in different side-by-side configurations, and also persists with another user. It does not occur with XFCE. Resetting the Window manager with the Compiz reset WM app does not fix this. I've concluded the burn-to-the-ground approach is likely the best, and would like to do a 100% reset of my graphics settings. It's an Intel integrated chipset. Removing ~/.config/monitors.xml did not work. Also, interestingly, the mouse can mouse-over the 50 errant pixels on the rhs of the right-hand monitor. I hypothesize that it's a compositing problem occurring at the layer where the background, selection, and clicks are caught. Also, inverting the right-hand monitor removes the issue, but renders the screen unusable. Even more datapoints: This happens in KDE as well Sometimes logging into Gnome and running xrandr --output DVI1 --auto resets it, but the issue immediately reappears when I press alt-tab. With Compiz Application Switch turned on, the workspace is 'pushed back' a bit, and the slice on the RHS follows it as well. I'm wondering if it's a flaw in the compiz workspace compositing configuration. I suspect the error was in the compositing configuration. I installed 11.10.

Read the article
Lead Programmer definition clarification

- by Junaid

I am working on PHP and MySQL based web application for more than 5 years now. I started my career from Intern - Jr Developer - Software Developer - Sr. Software Engineer [Team Lead] that's what I am nowadays. I was looking at the link at Wikipedia regarding who is a lead programmer. The link states the following: A lead programmer is a software engineer in charge of one or more software projects. Alternative titles include Development Lead, Technical Lead, Senior Software Engineer, Software Design Engineer Lead (SDE Lead), Software Manager, or Senior Applications Developer. When primarily contributing in a high-level enterprise software design role, the title Software Architect (or similar) is often used. All of these titles can have different meanings depending on the context. My current job responsibilities are more or less like a Development Lead and to some extent near Software Architect because I usually design the core structure of new products and managing 2-3 project simultaneously and in the meantime involved in assisting other teams regarding the structural design of their projects, I am usually on call with clients along with project managers, I code most of the time when my team stuck somewhere / workload / integrating some third party API and etc. Primary reason of this writing is to know if I qualify for a Development Lead Title? in accordance with my above mentioned job descriptions?

Read the article
Visual Studio 2010 Service Pack 1 Released

- by krislankford

The VS 2010 SP 1 release was simultaneous to the release of TFS 2010 SP1 and includes support for the Project Server Integration Feature Pack and updates to .NET Framework 4.0. The complete Visual Studio SP1 list including Test and Lab Manager: http://support.microsoft.com/kb/983509 The release addresses some of the most requested features from customers of Visual Studio 2010 like better help support IntelliTrace support for 64bit and SharePoint Silverlight 4 Tools in the box unit testing support on .NET 3.5 a new performance wizard for Silverlight Another major addition is the announcement of Unlimited Load Testing for Visual Studio 2010 Ultimate with MSDN Subscribers! The benefits of Visual Studio 2010 Load Test Feature Pack and useful links: Improved Overall Software Quality through Early Lifecycle Performance Testing: Lets you stress test your application early and throughout its development lifecycle with realistically modeled simulated load. By integrating performance validations early into your applications, you can ensure that your solution copes with real-world demands and behaves in a predictable manner, effectively increasing overall software quality. Higher Productivity and Reduced TCO with the Ability to Scale without Incremental Costs: Development teams no longer have to purchase Visual Studio Load Test Virtual User Pack 2010. Download the Visual Studio 2010 Load Test Feature Pack Deployment Guide Get started with stress and performance testing with Visual Studio 2010 Ultimate: Quality Solutions Best Practice: Enabling Performance and Stress Testing throughout the Application Lifecycle Hands-On-Lab: Introduction to Load Testing with ASP.NET Profile in Visual Studio 2010 How-Do-I videos: Use ASP.NET Profiler in Load Tests Use Network Emulation in Load Tests VHD/VPC walkthrough: Getting Started with Load and Performance Testing Best Practice guidance: Visual Studio Performance Testing Quick Reference Guide

Read the article
Mplayer not working after update

- by R. Morgenstern

After an update with update-manager in Unbuntu 12.04, Mplayer is not working anymore. It needs ffmpeg, but it can't be installed due to unmet dependencies. I added a ppa for fmpeg, but did not solve the problem. see output: Python (v2.7) requires to install .... GStreamer ffmpeg video plugin. Codecs to play mpeg, divx, mpeg4, ac3, wmv and asf files. Using Install, I get an error messages that it can't be installed due to unmet dependencies. see list below. How can I fix this problem? Thanks in advance for guidance. Renate The following packages have unmet dependencies: gstreamer0.10-ffmpeg: Depends: libavcodec-extra-53 (>= 4:0.7.3-1) but 4:0.8.3ubuntu0.12.04.1 is to be installed Depends: libavformat-extra-53 (>= 4:0.7.3-1) but 4:0.8.3ubuntu0.12.04.1 is to be installed Depends: libavutil-extra-51 (>= 4:0.7.3-1) but 6:0.10.4.0ubuntu0jon2.2 is to be installed Depends: libc6 (>= 2.7) but 2.15-0ubuntu10 is to be installed Depends: libglib2.0-0 (>= 2.31.2) but 2.32.3-0ubuntu1 is to be installed Depends: libgstreamer-plugins-base0.10-0 (>= 0.10.31) but 0.10.36-1 is to be installed Depends: libgstreamer0.10-0 (>= 0.10.31) but 0.10.36-1ubuntu1 is to be installed Depends: liborc-0.4-0 (>= 1:0.4.16) but 1:0.4.16-1ubuntu2 is to be installed Depends: libpostproc-extra-52 (>= 4:0.7.3-1) but 4:0.8.3ubuntu0.12.04.1 is to be installed Depends: libswscale-extra-2 (>= 4:0.7.3-1) but 4:0.8.3ubuntu0.12.04.1 is to be installed

Read the article
Ubuntu 12.04 Freezes w/ Ethernet Unplugged + Wireless Drops (Acer Aspire 5516)

- by Grand Master T

Ubuntu 12.04-12.10 32/64 freezes or won't boot if the Ethernet cable is unplugged and will not hold a wireless connection. Here is my scenario... Laptop: Acer Aspire 5516 Wireless card: Broadcom BCM4312 Ubuntu 12.04 32/64 Issues Unity 3d won't load without the Ethernet cable plugged in. If I let it load with Ethernet plugged in, it will freeze once I disconnect the cable. Unity 2d will load without the Ethernet cable plugged. In Unity 2d, wireless cannot hold a connection. I can connect to a Wireless network, but when I try to use it (i.e. open a browser), it disconnects. I can reconnect by disabling wireless (uncheck Enable Wireless), re-enable wireless, and reconnect. But, it will disconnect again once I start using it. Ubuntu 12.10 Issues Since 12.10 only gives me the option to load 3d (I assume), I experience the same thing as the first issue in 12.04. Attempted Solutions Enable networking/LAN in BIOS Set LAN first in boot priority in BIOS Remove STA wireless driver (bcmwl-kernel-source) and install b43 low power driver (firmware-b43-lpphy-installer). Remove default Network Manager and install Wicd. So far, I have had no luck with fixing this issue. Does anyone have any further suggestions?

Read the article
Lucene best practice

- by Dragos

I am trying to understand how Lucene should be used. From what I have read, creating an IndexReader is costly, so using a Search Manager shoulg be the right choice. However, a SearchManager should be produced by a NRTManager(which, by the way, should replace the IndexWriter for every add or delete operation performed). But in order to have a NRTManager, I should first have an IndexWriter, and here comes my problem. The documentation says: an IndexWriter is thread-safe the constructor of this class takes a Directory object, so it seems creating an instace should be costly(as in the case of an IndexReader) all changes are buffered and flushed periodically(so they seem to encourage using a single instance) but: the changes, although flushed will only be visible after commit or close after finished making updates(add/delete), the instance should be closed I also found this: http://stackoverflow.com/questions/5374419/forgot-to-close-the-lucene-indexwriter-after-adding-documents-to-the-index where it is said that not closing a writer might ruin everything So what am I really supposed to do? Is having a single IndexWriter instance a good idea(make only commit and never close it)? EDIT: What is more, if I use NRTManager, how can I make acommit`? Is it even possible?

Read the article
SOA performance on SPARC T5 benchmark results

- by JuergenKress

The brand NEW super fast SPARC T5 servers are available. The platform is superb to run large SOA Suite environments or to consolidate your whole middleware platform. Some performance advices, recommended for all workloads: Performance profile for SOA apps on Oracle Solaris 11 BPEL (Fusion Order Demo) instances per second OSB (messages / transformations per second) Crypto acceleration study for SOA transformations SPARC T4 and T5 platform testing, pre-tuning Performance suitable for mid-to-high range enterprise in stand-alone SOA deployment or virtualized consolidation environment shared with Oracle applications 2.2x to 5x faster than SPARC T3 servers 25% faster SOA throughput, core to core than Intel 5600-series servers (running Exalogic software) SPARC T5 has 2x the consolidation density of Intel 5600-class processors 2x faster initial deployment time using Optimized Solutions pre-tested configuration steps Over 200 Application adapters for easiest Oracle software integration Would you like to get details? We can share with you on 1:1 bases T5 SOA Suite performance benchmarks, please contact your local partner manager or myself! SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: T5,TS Sparc,T5 SOA,bechmark,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

Read the article
Installing ubuntu 12.04 on macbook pro9,2

- by stariz77

I seem to have tried all the various suggested methods for installing ubuntu on a mbp, but can't seem to get anything that works and was wondering if anyone has run into any new problems with the latest non-retina models? I have a core i7 in my macbook, and model identifier is MacBookPro9,2. I have partitioned my HD using disk utility and have 700gig free space ready for the install (I haven't removed OSX Lion, it is still there in a 50gig partition). Problem: I am just getting a blank screen with a blinking cursor (unresponsive) in the top left whenever I boot from the disk. I left it for 20 minutes and nothing ever happened. This was without any boot manager, just holding "c" on startup. Attempted remedies: I have downloaded the 64 ubuntu iso from their site 3 times now and burned 4 separate discs to rule out some kind of corruption or burn error. I burned one in OSX Lion 10.7.4 and 3 on my windows 7 pc. I tried holding "alt" instead and then navigating to the windows disc to boot. Same thing happens, blank blinking unresponsive cursor. I also tried going to the EFI disc which actually brings up a menu (after saying "error prefix is not set") asking if I want to install ubuntu, test for errors or partition. All three options lead me to an unresponsive blank screen (some without cursors). I downloaded and installed rEFIt and if I hold "alt" on startup a linux penguin (Boot Linux from CD) appears in my boot options, along with the apple boot, and two others that I'm not sure of: "Boot EFI\boto\bootx64.efi from" and "Boot Legacy OS from". The "Boot Linux from CD" just takes me to the blank blinking cursor screen; again, I left if for 10+ minutes and nothing. I heard that the detection of the graphics card might be a problem and that I need change to nomodeset, but I have tried pressing F6 in all of the boot menus listed above and no options appear. Does anyone have any other suggested routes or can you see what I might have done wrong?

Read the article
Using VirtualBox to test drive Windows Blue

- by Fat Bloke

Oracle VM VirtualBox is great for trying out the latest and greatest technologies and platforms. So when Microsoft recently announced the Developer Preview for Windows Server 2012 R2 and Windows 8.1, it was with eager anticipation that FatBloke ran to the TechNet Evaluation Center to download the isos. Once downloaded, a new VM in VirtualBox Manager was created that used Windows 2012 (64-bit) OS type and all the defaults were selected. And on starting the VM, and pointing to the iso file to install from, the excitement rose as we saw a cool new splashscreen image: But suddenly our hopes are dashed.... It would seem that this platform requires an instruction (CMPXCHG16B) that VirtualBox doesn't offer "out-of-the-box". Fear not, for the VirtualBox team knew that this day would finally arrive and have prepared an "in case of emergency" switch as follows: Power off the vm; At the command line type: VBoxManage setextradata [vmname] VBoxInternal/CPUM/CMPXCHG16B 1 Start the VM and install Windows Server 2012 R2 This will be enabled by default in a future release, but geeks can't wait, hence this blog. Enjoy! -FB

Read the article
EBS ATG Advisor Webcasts - FREE!

- by cwarticki

For June 2012 we have scheduled 2 Webcasts - E-Business Suite OAM Overview and Usage session and the E-Business Suite Workflow Avisor. We are driving 2 sessions for a better global alignment. E-Business Suite - OAM Overview and Monitoring Agenda Oracle Applications Manager (OAM) Overview Log files Diagnostics and Logging Concurrent processing through OAM Applications Dashboard Troubleshooting Patch Management. Patch Wizard OAM "How To" Documents Questions &Answers EMEA Session : July 10, 2012 at 09:00 AM UK / 10:00 AM CET / 13:30 India / 17:00 Japan / 18:00 Australia Details & Registration : Note 1466056.1 Direct link to register in WebEx US Session : July 11, 2012 at 18:00 UK / 19:00 CET / 10:00 AM Pacific / 11:00 AM Mountain/ 01:00 PM Eastern Details & Registration : Note 1466057.1 Direct link to register in WebEx E-Business Suite - Workflow Analyzer - Follow-Up Agenda Overview of Workflow Analyzer Enhancements implemented in the latest Release Questions & Answers EMEA Session : July 24, 2012 at 09:00 AM UK / 10:00 AM CET / 13:30 India / 17:00 Japan / 18:00 Australia Details & Registration : Note 1466058.1 Direct link to register in WebEx US Session : July 25, 2012 at 18:00 UK / 19:00 CET / 10:00 AM Pacific / 11:00 AM Mountain/ 01:00 PM Eastern Details & Registration : Note 1466059.1 Direct link to register in WebEx Schedules, recordings and the Presentations of the Advisor Webcast drove under the EBS Applications Technology area can be found in Note 1186338.1. Current Schedules of Advisor Webcast for all Oracle Products can be found on Note 740966.1 Post Presentation Recordings of the Advisor Webcasts for all Oracle Products can be found on Note 740964.1 If you have any question about the schedules or if you have a suggestion for an Advisor Webcast to be planned in future, please send an E-Mail to Ruediger Ziegler.

Read the article
Failure Driven Development

- by DevSolo

At our shop, we strive to be agile. And I'd say we are making great strides. That said, a few of us have spotted a pattern we have started calling "Failure Driven Development". Failure Driven Development can basically be desribed as an agile release/iteration cycle where the bugs/features are guided not by tasks and stories with acceptance criteria, but with defects entered in the defect tracking software. Our team has a great Project Manager who strives to get the acceptance criteria from the customer(s), but it's not always possible. From my development chair, this is due to the customer either not knowing exactly what they want or (and this is the kicker) two different "camps" at the customer's main office conflict with how a story should be implemented. Camp A will losely dictate that Feature X works like this, then Camp B will fail it due not functioning like that. Hence, the term "FDD". The process is driven by "failures". This leads to my question: Has anyone else encountered this and if so, any tips/suggestions for dealing with it? We have, of course, tried to get Camp A and B to agree prior, but everyone knows this isn't always the case. Thanks

Read the article
A (slight) Change of Focus

- by StuartBrierley

When I started this blog in September 2009 I was working as a BizTalk developer for a financial institution based in the South West of England. At the time I was developing using BizTalk Server 2004 and intended to use my blog to collate and share any useful information and experiences that I had using this version of BizTalk (and occasionally other technologies) in an effort to bring together as many useful details as I could in one place. Since then my circumstances have changed and I am no longer working in the financial industry using BizTalk 2004. Instead I have recently started a new post in the logistics industry, in the North of England, as "IT Integration Manager". The company I now work for has identified a need to boost their middleware/integration platform and have chosen BizTalk Server 2009 as their platform of choice; this is where I come in. To start with my role is to provide the expertise with BizTalk that they currently lack, design and direct the initial BizTalk 2009 implementation and act as lead developer on all pending BizTalk projects. Following this it is my hope that we will be able to build on the initial BizTalk "proof of concept" and eventually implement a fully robust enterprise level BizTalk 2009 environment. As such, this blog is going to see a shift in focus from BizTalk 2004 to BizTalk 2009 and at least initially is likely to include posts on the design and installation of our BizTalk environment - assuming of course that I have the time to write them! The last post I made was the start of a chapter by chapter look at the book SOA Patterns with BizTalk Server 2009. Due to my change of job I am currently "paused" half way through this book, and my lack of posts on the subject are directly as a result of the job move and the pending relocation of my family. I am hoping to write about my overall opinion of this book sometime soon; so far it certainly looks like it will be a positive one. Thanks for reading; I'm off to manage some integration.

Read the article
How to ensure nvidia_current module loads during boot

- by Aras

I am running Ubuntu 12.10 on an Asus G75V laptop with nvidia gforce GTX 660M. I first run 12.04 on this machine and was able to install nvidia_current drivers from swat ppa: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current This worked in 12.04 and after rebooting the machine my graphics where working properly. After upgrade to 12.10 however, the machine boots into a low resolution desktop which I can not really interact with. I suspect this is due to the driver not being loaded properly. To fix this, I have to switch to ctrl+alt+F1 session and manually load the nvidia_current module and restart the desktop manager: sudo modprobe nvidia_current sudo service lightdm restart Now everything works fine again. However, I would like not to have to do this every time I reboot the machine. I also dont want to hack an script to do this on load. Basically, if things are setup currectly, the nvidia_current driver which is installed should load. How can I make sure nvidia_current driver module loads properly when system starts?

Read the article
Setting up multiple cores for apache solr for Ubuntu 12.04 and Drupal 7

- by chrisjlee

I'm setting up solr locally for my development purposes and integration with Drupal 7. I'm not very familiar with tomcat. My background has primarily been LAMP setups. So I went and installed the package provided by ubuntu for apache solr following this guide. sudo apt-get install tomcat6 tomcat6-admin tomcat6-common tomcat6-user tomcat6-docs tomcat6-examples sudo apt-get install solr-tomcat I've got that working. The apt-get package manager does a great job and allows me to setup solr but with one core. What steps need to be taken to enable multi core setup for apache solr? And below is my solr.xml file: sudo nano /var/lib/tomcat6/conf/Catalina/localhost/solr.xml  <Context path="/solr" docBase="/usr/share/solr" debug="0" privileged="true" allowLinking="true" crossContext="true">  <Resources className="org.apache.naming.resources.FileDirContext" allowLinking="true" /> <Environment name="solr/home" type="java.lang.String" value="/usr/share/solr" override="true" /> </Context>

Read the article
Installation causing broken packages

- by AWE

Here I come I am so determined to use Ubuntu that I paid a professional to install it for me (dualboot). When I got it I got a lot of things from the software center. Skype did not have a download button so I googled it and Ubuntu help told me to do this: sudo add-apt-repository "deb http://archive.canonical.com/ $(lsb_release -sc) partner" and then this: sudo apt-get update && sudo apt-get install skype The terminal told me "that this is potentially harmful..." but I thought it was Ubuntu language meaning "are you sure?" Now items cannot be installed or removed until the package catalog is repaired, so I want to repair it but the package operation fails. "sudo aptitude -f install" - command not found Synaptic package manager tells me that I have two broken packages, libc6 and libc6-dev but doesn't help, only makes life complicated. What the *#$%&!!! I don't want to be forced to become a computer scientist just to be able to use a free source os. P.s. the sound stopped working

Read the article
How do I remove a malformed line from my sources.list?

- by eminencejae

I have unistalled and reinstalled the Ubuntu Software Center as per info I found in a similar thread and I got the same response about line 91 or something like that. I just tried to upload a screen shot but since I'm new it won't allow me to. I also can not figure out how to cut and paste anything so I have to hand type what the error screen says, both when I attempt to open the software center and nothing happens, when I try to enter commands into the terminal to uninstall, reinstall, whatever I get the same following: COULD NOT INTITIALIZE THE PACKAGE INFORMATION An unresolvable problem occured while initializing the package information Please report t:his bug against the 'update-manager' package and include the following error message: 'E: Malformed line 91 in source list/etc/apt/sources.list (dist parse) E: The list of sources could not be read., E: The package list of status file could not be parsed or opened. How do I report bugs? What can be done about this. I have searched and everything everyone says to do leads me back to the same line error message. So, I don't know how to get to line 91 in the source list; to tell you what it says. Sorry, I'm really new to this. That is what I need is to find out how to get there and fix what it says. I would really like to NOT have to re partition my hard drive and start from scratch, so I'm really looking forward to getting this problem solved. I need to be able to install new software.

Read the article
Start a new project. Where is the inspiration ?

- by Kakawait

The question may seem strange at first glance ... And I may be alone in this situation. But currently I want to improve my skill through learning new framework. however, do a simple "HelloWorld" application does not satisfy me. I think a practical project is required to apprehend the basics of a framework. I know there is many scholar-like project like design a library manager or CMS. But I have recently planned to learn ~3 differents frameworks and I can't find any motivations through "unexciting" project. In the end I have not started any framework ... I'm aware of I do not develop the project of the year ... I'm just looking for something a bit exciting. I do not expect any project subject, anyway stimulation provided by a project is something subjective. But I want to know your inspiration ! (or method to learn framework ^^) I'm talking about web-dev framework but I'm open to any kind information ! Kind regards.

Read the article
Register to Attend the AutoVue 20.2 Webcast on April 3, 2012

- by Pam Petropoulos

Want to learn more about the latest AutoVue 20.2 release? Discover what this latest major release of AutoVue can do for you. Join Celine Beck, AutoVue Product Management and Strategy Manager, during this live webcast to discover how the new release can transform your business processes and extend the value of your visualization investment. Hear how customers and partners are improving their workflows and creating differentiated offerings thanks to AutoVue enterprise visualization. Date: Tuesday, April 3, 2012 Time: 11:00 a.m. EST Click here to register for this event. For complete details about the new release, also check out the What’s New in AutoVue 20.2 Datasheet, available here.

Read the article

< Previous Page | 563 564 565 566 567 568 569 570 571 572 573 574 | Next Page >