Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 576/750 | < Previous Page | 572 573 574 575 576 577 578 579 580 581 582 583  | Next Page >

• can't find port 22 traffic under VirtualBox

  - by telliott99

  I'm trying to learn to use tcpdump. I thought I'd eavesdrop on my ssh login. The setup is a bit unusual, I have OS X Lion running VirtualBox, with Ubuntu running in the VM. I have ssh enabled and can login from OS X normally: > ssh -p 22 10.0.1.2 -l telliott Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-17-generic i686) * Documentation: https://help.ubuntu.com/ 0 packages can be updated. 0 updates are security updates. Last login: Sat Mar 31 19:54:36 2012 from toms-mac-mini.local telliott@U32:~$ logout Connection to 10.0.1.2 closed. > I have not obfuscated the ssh port on Ubuntu. From OS X, stroke gives what I expect: > ./stroke 10.0.1.2 22 22 Port Scanning host: 10.0.1.2 Open TCP Port: 22 ssh So from OS X I do: > sudo tcpdump -i en1 -v port 22 Password: tcpdump: listening on en1, link-type EN10MB (Ethernet), capture size 65535 bytes Then I login from OS X to Ubuntu using ssh, but I see nothing with tcpdump. Here is ifconfig from Ubuntu: telliott@U32:~$ ifconfig eth1 Link encap:Ethernet HWaddr 08:00:27:d7:ba:0e inet addr:10.0.1.2 Bcast:10.0.1.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fed7:ba0e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:799 errors:0 dropped:0 overruns:0 frame:0 TX packets:465 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:96863 (96.8 KB) TX bytes:68638 (68.6 KB) Where are the packets I was hoping to see? Thanks for any help.

  Read the article

• Force Windows Local Subnet Traffic through a Gateway

  - by Beerey

  Hi all, We are attempting to route all traffic from a certain machine to a gateway. This works ok for traffic destined for subnets outside of the machine's subnet. However, traffic to machines in the same subnet as the source machine goes through an On-Link gateway in Windows. This means that the default gateway is ignored, and traffic in a subnet (for example, 192.168.50.10 - 192.168.50.11) flows. Destination Netmask Gateway Interface Metric 192.168.50.0 255.255.255.0 On-link 192.168.50.214 276 This route can be deleted from Windows, but when the machine is rebooted it always comes back. Adding a persistant static route to the gateway with a lower metric doesn't work, since it will still try the On-Link gateway after the persistant route fails. Adding each machine in a VLAN isn't an option due to the setup we have Adding a startup script to delete the gateway isn't a great option either, since users will have full admin access to the machine and might disable the script. We cannot transperantly intercept all network traffic on the subnet using Gratuitous ARPs or transparent proxying, since there are other machines on the subnet which use a different gateway The only way we have gotten it to work is by adding a persistant route to the gateway for the subnet traffic, and deleting the On-link route on reboot. The question is then. Is there a way to permanently remove this On-link route If not, is there a way to otherwise force even local subnet traffic to go through a gateway?

  Read the article

• ubuntu 9.04 pptp broken after a power failure

  - by kevin42

  I have a small Ubuntu 9.04 router setup as a NAT box and a PPTP server. After a power failure everything except the PPTP server still works. A windows client gets to "registering your computer on the network" but then says Error 742: The remote computer does not support the required data encryption type. I did some research and I think the problem is with the ppp_mppe module. When I try to run 'modprobe ppp_mppe' it hangs indefinitely. What would cause this hang? Any ideas how I can troubleshoot this further? Thanks for the help! UPDATE: I am still having the problem, however I have found some more information. When the first user tries to connect to pptp, the process list shows modprobe sha1 running, and one instance of modprobe ppp_mppe for each connection attempt. If I killall modprobe at this point the next connection attempt works, and everything is fine until the next reboot. I'm planning to do a clean install at some point in the future but I'd really like to get to the real cause of this.

  Read the article

• 426 Connection closed; transfer aborted.

  - by Jiaoziren

  Hi, I have an IIS FTP set up on Windows 2003 SP2 (S1). Everyday in the early morning, a script on another server (S2) will run and initiate FTP transfer of pulling log files from S1 to S2. The FTP client we're using is built-in FTP.exe in Windows 2000 on S2. Recently we replaced S1 with a new server however we kept the IP address. There are multiple IP addresses on new S1. Ever since the new S1 was in place, the '426 Connection closed; transfer aborted.' errors haven been occuring randomly. The log indicated that the transfer started ok however the file cannot be transferred completely, as per log below: mget access*.log 200 Type set to A. 200 PORT command successful. 150 Opening ASCII mode data connection for access02232010.log(205777167 bytes). 426 Connection closed; transfer aborted. ftp: 20454832 bytes received in 283.95Seconds 72.04Kbytes/sec. The firewall monitor suggested that the connection was setup in passive mode however I've been told that MS FTP.exe doesn't support passive mode. Though I can see the response of 'entering passive mode' from server when typing in 'quote pasv'. My network admin has told me to try the transfer in active mode however I don't know how to open active mode on client side. It's getting really frustrating. Wish someone here has the right knowledge/experience could shed me a light. Cheers.

  Read the article

• Can I use this power supply + case combination without causing problems?

  - by evan

  I am putting together a computer with a Antec P180 case and a Thermaltake TR2 RX 650 W power supply. The problem is that the Antec P180 case has a separate compartment for the power supply. With an opening for the on/off switch + ac connector to one side, a wall with a small hole for cables to route through on top, a wall on the bottom, and on the other side a fan which pushes air from the hard drive compartment to the power supply compartment. I think the design of the case assumes the power supplies fan is on the side next to the on/off switch, but the fan on the power supply I have is on top, which makes me worry about overheating the power supply. There is about half an inch between the top of the power supply and the wall and the other fan should keep air flowing to push out the air that the power supply pushes upwards. Do you think this setup should work, or should I go get another power supply? Thanks!! PS: This computer will be running an Ubuntu server, so it will always be on, but the rest of the components shouldn't be generating as much heat as they would on say a gaming machine.

  Read the article

• COM+/Desktop Heap errors in IIS affecting sites at random?

  - by tresstylez

  We have a Win2K3 server that is hosting 30+ sites. Each site is configured to have its own unique application pool -- so that we can manually recycle specific sites if needed and not kill sessions for the others. From what I've read, the consequence of this type of setup is that each application pool worker process gets allocated a Desktop Heap (normally 512 kb's) and we limit the number of app pools we can serve. http://blogs.msdn.com/b/david.wang/archive/2006/01/25/security-considerations-of-usesharedwpdesktop-on-iis6.aspx PROBLEM: What we're seeing is that occasionally COM+ errors get triggered, presumably by hitting our 512 kb limit of the desktop heap -- and certain sites become unresponsive (or have errors) until we manually recycle that specific app pool. I know that I can increase the desktop heap limit to 1024, and make other tweaks/tunes, but I've been tasked with finding out what exactly causes one site's heap to max out as opposed to another. It seems that when we start seeing COM+ errors, the sites it affects are random -- small sites or big sites (heavier used). Is it based on process id? Traffic? Any pointers on understanding this a little more would be excellent. Thanks! jg

  Read the article

• Using dnsmasq for accessing multiple nameservers assigned by DHCP

  - by Ash

  At my work desktop running openSUSE 11.4, I have a local network which gets its address, domain (work.site) and nameservers (10.100.1.1, 10.100.1.2) info through DHCP - which get written into /etc/resolv.conf I get to access the internet using the work network, and these 2 nameservers end up returning the entries for any public domain name lookups on the internet. I also have a private VPN that I end up connecting. The nameserver (10.111.1.1) and domain (private.site) are rarely bound to change for this network, but currently they're pushed by the openVPN client into networkmanager, and which also gets merged with the existing /etc/resolv.conf My resolv.conf ultimately ends up looking like this: search private.site work.site nameserver 127.0.0.1 nameserver 10.111.1.1 nameserver 10.100.1.1 As you can see the 2nd nameserver from my work network was pushed out because of the max 3 entry limitations. It is fine still, but would be a problem if that nameserver goes down for maintenance or something. So I found out that dnsmasq could help me here, and hence I setup dnsmasq just as a local DNS resolver without any DHCP support. So right now this is my /etc/dnsmasq.conf: resolv-file=/etc/resolv.conf server=/private.site/10.111.1.1 server=/1.111.10.in-addr.arpa/10.111.1.1 listen-address=127.0.0.1 bind-interfaces log-queries I've made dnsmasq get the list of nameservers from /etc/resolv.conf since NetworkManager seems to be updating this list correctly (for a max of 3 nameservers). I'm able to resolve the host names in both the networks correctly. So these are the questions I have: Is there a way I can make either NetworkManager or dhclient write out the list of nameservers somewhere else which I can make dnsmasq use as resolv-file ? How do I make dnsmasq use certain nameservers as the default for all queries ? Right now I notice that lookups for public domains on the internet are usually sent to both the nameservers - the one on work.site as well as private.site. It would be good if I can limit this only to work.site.

  Read the article

• mdadm+zfs vs mdadm+lvm

  - by Alex

  This may be a naive question since I'm new to this and I cannot find any results about mdadm+zfs, but after some testing it seems it might work: The use case is a server with RAID6 for some data that is backed-up somewhat infrequently. I think I'm well served by any of ZFS or RAID6. Platform is Linux. Performance is secondary. So the two setups I am considering are: A RAID6 array plus regular LVM and ext4 A RAID6 array plus ZFS (without redundancy). Is this second option that I don't see discussed at all. Why ZFS+RAID6? It's mainly because the inability of ZFS to grow a raidz2 with new disks. You can replace disks with larger ones, I know, but not add another disk. You can accomplish 2-disk redundancy and ZFS disk growth using mdadm as the redundancy layer. Besides that main point (otherwise I could go directly to raidz2 without RAID under it), these are the pros-cons that I see for each option: ZFS has snapshots without preallocated space. LVM requires preallocation (might be no longer true). ZFS has checksumming (very interested in this) and compression (nice bonus). LVM has online filesystem growth (ZFS can do it offline with export/mdadm --grow/import). LVM has encryption (ZFS-on-Linux has not). This is the only major con of this combo I see. I guess I could go RAID6+LVM+ZFS... seems too heavy, or not? So, to close with a proper question: 1) Is there anything that inherently discourages or precludes RAID6+ZFS? Anyone has experience with a setup like this? 2) Are there possibilities for checksumming and compression that would make ZFS unnecessary (maintaining the possibility of filesystem growth)? Because the RAID6+LVM combo seems the sanctioned, tested way.

  Read the article

• Check for updates of a specific Debian package list

  - by Erwan Queffélec

  The setup I run a Debian Squeeze host that I use to build a multilanguage project (python, java, php...) and generate custom packages (debian and RPM) automatically (through jenkins) The problem The target distributions of those Debian packages are Etch, Lenny and Squeeze. But our project has some native dependencies that are available only through the DebianRelease + 1 repository (i.e Lenny + 1 == Squeeze, Squeeze + 1 == Wheezy). We for example, need the jetty packages from Squeeze in Lenny, and the cyrus-imapd-2.4 packages from Wheezy in Squeeze. Some additional info : Some package we can simply 'backport by hand' by mirroring the DebianRelease + 1 packages to our own repositories. For instance, the jetty package from Squeeze will run fine on Lenny because it doesn't need an s**tload of additional dependencies However we do need to rebuild some packages. For instance, cyrus-imapd-2.4 from Wheezy has a lot of unsatisfied dependencies on Squeeze. So we need to rebuild it in Squeeze and then upload it to our repo. The question I need to have a simple way of knowing if they are any updates on those extra packages (both "normal" and "security" updates). I could write a simple script that runs weekly, get some parameters from a file, and generate an update report. Let's say the file looks like this: jetty:squeeze cyrus-imapd-2.4:wheezy The script should run as normal user not to mess up the system apt configuration and issue the appropriate commands to generate that report. Does Debian has some built-in apt-* commands/options dedicated to that kind of problem I could use to write this script ? If not, can someone think of another clean solution to achieve what I need ?

  Read the article

• WDS updating raid drivers in an already existing image WIM

  - by Tim

  Here is my current setup. WDS installed on Server 2008 R2 for the new driverstore and multicast features. A Windows Server 2003 32bit Standard image built to support previous DL360 models. A new HP DL360 G6 which has a new raid controller in it. I need to add the driver for the raid controller into my Server 2003 32bit standard install image but I can't seem to figure out the correct method to do so. So far I've tried the following: Mounting the image and placing the drivers into the Sysprep drivers folder, adding the PCI device codes into the sysprep.inf file and committing the changes to the image. Pushing the image to a DL360 G4, ensuring the driver is in the correct locations and re-sysprepping the image. Hoping that the new driverstore feature would magically work with 2003 (a guy can dream cant he?) Is there some standard method that I can use to update this image with the new drivers or do I need to start from scratch with an entirely new build? Thanks in advance.

  Read the article

• Dell 15Z. Trying to output image using Mini Displayport to a Yamasaki Q270. (2560 x 1440) rez monitor. Dual DVI-D to Mini Displayport

  - by michaelcku

  I have a Dell 15Z. GT525M Video card. Updated Driver via NVIDIA. Problem is I just purchased a Yamasaki Catleap Q270 monitor. It is a (2560x1440) monitor with only a Dual DVI-D out. 15Z only has HDMI and a Mini Display Port. I got a Active Dual DVI-D to Mini Display Port Active Adapter(Linked Below). http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802&p_id=6904&seq=1&format=2 The Setup works when i plug it into my Macbook air 13.3. However when I plug it into my 15Z it doesn't work. Tried everything I can thank of. Window control P. FN and F1. It just doesn't work. I believe the issue lies in the Mini Display Port but i can't be sure. No matter what i do, the Mini Display Port doesn't get recognized. Spent 3 hours on the phone with the XPS Tech team. They simply said it was not compatible.... Any help or suggestion would be greatly appreciated.

  Read the article

• Puppet Agent fails sporadically, with either timeout or "Could not find class" error

  - by smokris

  I have puppet master running on a Xen dom0, and 3 domUs syncing to it via an hourly crontab puppet agent --test. About 80% of the time, the puppet agent --test completes successfully: info: Retrieving plugin info: Caching catalog for test3 info: Applying configuration version '1333319732' notice: Finished catalog run in 5.08 seconds The other 20% of the time, it fails midway, with errors such as the following: err: Could not retrieve catalog from remote server: Error 400 on SERVER: Could not find class iptables for test1 at /etc/puppet/manifests/site.pp:1 on node test1 warning: Not using cache on failed catalog err: Could not retrieve catalog; skipping run or info: Retrieving plugin info: Caching catalog for test2 info: Applying configuration version '1333319732' notice: Finished catalog run in 24.73 seconds err: Could not send report: Error 500 on SERVER: Internal Server Error private method `gsub' called for WEBrick::HTTPStatus::RequestTimeout:Class WEBrick/1.3.1 (Ruby/1.8.5/2006-08-25) OpenSSL/0.9.8e-rhel5 at puppet:8140 or info: Retrieving plugin err: Could not retrieve catalog from remote server: execution expired warning: Not using cache on failed catalog err: Could not retrieve catalog; skipping run or info: Retrieving plugin info: Caching catalog for test3 info: Applying configuration version '1333319732' notice: Finished catalog run in 9.47 seconds err: Could not send report: Error 408 on SERVER: Request Timeout During this time, I've not made any changes to the Puppet configuration — it just sporadically fails. I'm running puppet-2.7.12 on CentOS, and followed the setup instructions described on http://docs.puppetlabs.com/learning/agent_master_basic.html. Any ideas about how I can troubleshoot this?

  Read the article

• Triple boot WIndows 7, Windows 8, and Mountain Lion on Macbook Pro

  - by Nathan

  Ok, So I have a bit of a unique situation here I could use some help on. I've modded my summer 2011 MBPro to have 2 harddrives by replacing the optical drive. OSX Mountain Lion is installed on a single partition of a 120GB SSD. The second drive is 750GB, partitioned as 550GB, 150GB, and ~50GB. I've set the 550GB to act as my OSX homefolder, but I'd like to install windows 7 and Windows 8 on the remaining partitions. It Took a while, but by following this guide, I eventually found a way to install Windows without a CD/DVD drive by following this http://huguesval.com/blog/2012/02/installing-windows-7-on-a-mac-without-superdrive-with-virtualbox/ It worked flawlessly for creating both windows 7 and windows 8 images that I could clone onto FAT32 partitions. However, I have encountered a problem when trying to triple boot. After I put Windows 8 onto the ~50GB partition and tried to boot into windows 7 I get an error that says something like: error: 0x0000000e The Boot selection failed because the required device is inaccessible. If I re-clone the windows 7 image onto the drive and select the option to "replace BCD" file for the drive, windows 7 will boot but windows 8 now gives me the same exact error. I realize this is a pretty extensive setup, but if anyone has some insight I'd love to hear it.

  Read the article

• Install Linux Mint on PC without bootable CD

  - by crosenblum

  Unfortunately my PC's CD drive is not bootable; I have such a mixture of SATA and IDE drives, so until I have more money to redo my controller setup, I can't boot from any cd. Currently, I have a DVD burned with latest version of Linux Mint, and I have an USB drive with an old version of Mint. I have a partition ready to install Linx Mint into, but no idea how to install it, since I can only boot to my hard drive. I am totally unable to boot to CD, so that is definitely out. My main partition is WinXP Pro SP3. Is there software I can use to format my Linux partition, so that I can then just copy Mint over to that partition? Or is there a better way to install linux mint? I have to do it within Windows XP, since that's all that I can boot right now. I have considered Mint4Win, but that doesn't allow a full installation of Linux Mint. Any ideas?

  Read the article

• WSS 3.0 Backup/Restore Root Site Collection to Sub-Site of New Site Collection

  - by bfrancis

  Our intranet was originally setup to be at the root of its site collection. We are trying to change this so that our new internet site will live in the root and the intranet will be a sub-site. At this point I have created a new web application and site collection to house the internet and intranet. I used the 'stsadm -o backup' command to create a backup of our current intranet. I then ran the 'stsadm -o restore' command to restore the intranet site collection to wss/sites/intranet. This seems to have worked as I am able to access the intranet from this location. The issue I now seem to have is that images, sub-sites, etc. are all making reference as if the intranet is still the root site. So for example a link to a sub-site is pointing to wss/department/technology/default.aspx and it needs to point to wss/sites/intranet/department/technology/default.aspx. I am looking for help and/or clarification on two things: 1. Am I approaching the migration of a root site collection to a sub-site the best way? 2. How would I go about updating the link references so that they are based on the intranet now being a sub-site instead of the root site?

  Read the article

• How do I install OpenStack on a single Ubuntu 12.04 node?

  - by Sam Edwards

  I'm having trouble installing OpenStack in Ubuntu 12.04, for various reasons: The official Ubuntu website recommends Juju and MAAS. However, this is a single node I am trying to get OpenStack installed on, and MAAS requires "two or more nodes" according to the docs. Additionally, I don't have any experience in MAAS and Juju and would rather stick to technologies I am more familiar with so that I can debug problems that arise. I have tried StackGeek but this fails because the node only has a single Ethernet port. The node does, however, have the second hard drive required for the nova storage. I have tried DevStack but cannot log into the dashboard. The login form appears fine, but as soon as I try to submit the page, my browser begins loading indefinitely. I have tried installing straight from packages, but I get an Internal Server Error in the dashboard upon trying to log in, with no helpful logs anywhere in sight to aid me in debugging the issue. Each of these attempts was with a fresh Ubuntu 12.04 LTS setup; I'm finding it really strange that no matter what I try, I cannot get OpenStack installed. Is this even a stable/mature project? Why am I encountering so many bugs?

  Read the article

• authbind, privbind or iptables REDIRECT (port 80 to 8080)?

  - by chris_l

  Hi, I'd like to run Glassfish v3 as a non-privileged user on Linux (Debian), but make it available on port 80. I'm currently doing this with iptables: iptables -t nat -I PREROUTING -p tcp -d x.x.x.x --dport 80 -j REDIRECT --to-port 8080 This works, but I wonder: If this has any significant performance impact compared to binding directly to port 80 If I could make a similar setup also work for HTTPS (or if that must run on 443) If there's a way to avoid other users from binding to port 8080 (in case my server crashes) - maybe block that port permanently to other users somehow? ...or if I should use authbind/privbind instead? Problem: I couldn't make it work with authbind or privbind so far. For authbind, I edited asadmin's last line to: exec authbind --deep "$JAVA" -Djava.net.preferIPv4Stack=true -jar ... For privbind: exec privbind -u glassfish "$JAVA" -Djava.net.preferIPv4Stack=true -jar ... (Only) with these settings, I can successfully perform a create-domain --domainport 80. This proves, that authbind and privbind actually work (the authbind version of the script is called by the glassfish user; the privbind version is called by root of course). However, in both cases I get the following exception, when starting the domain (start-domain): [#|2010-03-20T13:25:21.925+0100|SEVERE|glassfishv3.0|javax.enterprise.system.core.com.sun.enterprise.v3.server|_ThreadID=11;_ThreadName=FelixStartLevel;|Shutting down v3 due to startup exception : Permission denied: 80=com.sun.enterprise.v3.services.impl.monitor.MonitorableSelectorHandler@1fc25e5|#] I haven't found a solution for that yet (after searching the web, it seems, that this isn't so easy?) But maybe, the solution with iptables is good enough - what do you think? Thanks, Chris

  Read the article

• memcached append() php ubuntu - bad protocol

  - by awongh

  I am running ubuntu gutsy(7.1) , php5 and I am trying to get memcached running locally. I installed everything as per the docs: memcached daemon, php PECL extension, libevent, etc. But now I can only run half of the example script for memcached append(): <?php $m = new Memcached(); $m->addServer('localhost', 11211); $m->setOption(Memcached::OPT_COMPRESSION, false); $m->set('foo', 'abc'); $m->append('foo', 'def'); var_dump($m->get('foo')); ?> the script terminates @ append() with an RES_BAD_PROTOCOL error message. It still runs the get(). I don't know why memcached would otherwise be working fine (connect, set, get - with the correct value of 'abc') and not work for append. it also doesnt work with prepend. I believe I have the setup correct, but I am not sure. Maybe there are compatibility problems between the versions of the dependecies? thanks much

  Read the article

• Centos IPTables configuration for external firewall

  - by user137974

  Current setup Centos which is a Web, Mail (Postfix,Dovecot), FTP Server and Gateway with public ip and private ip (for LAN Gateway). We are planning to implement external firewall box and bring the server to LAN Please guide on configuring IPTables... Unable to receive mail and outgoing mail stays in postfix queue and is sent after delaying... The local ip of the server is 192.168.1.220 iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP incoming HTTP iptables -A INPUT -i eth0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport 443 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 443 -m state --state ESTABLISHED -j ACCEPT outgoing HTTP iptables -A OUTPUT -o eth0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT FTP iptables -A INPUT -p tcp -s 0/0 --sport 1024:65535 -d 192.168.1.220 --dport 21 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp -s 192.168.1.220 --sport 21 -d 0/0 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -p tcp -s 0/0 --sport 1024:65535 -d 192.168.1.220 --dport 1024:65535 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A OUTPUT -p tcp -s 192.168.1.220 --sport 1024:65535 -d 0/0 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT SMTP iptables -A INPUT -p tcp -s 0/0 --sport 1024:65535 -d 192.168.1.220 --dport 25 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp -s 192.168.1.220 --sport 25 -d 0/0 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp -s 192.168.1.220 --sport 1024:65535 -d 0/0 --dport 25 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -p tcp -s 0/0 --sport 25 -d 192.168.1.220 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT POP3 iptables -A INPUT -p tcp -s 0/0 --sport 1024:65535 -d 192.168.1.220 --dport 110 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp -s 192.168.1.220 --sport 110 -d 0/0 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT

  Read the article

• Virutal Machine loses network connectivity on Hyper V Cluster

  - by Chris W

  We're running a number of VMs on a 6 node failover cluster of blades using Hyper V. We have an intermittent issue (every few days at different times - not a fixed frequency) of VMs losing network connectivity. Console access to the VM suggests all is fine and the underlying blade has normal connectivity. To resolve the problem we either have to re-start the VM or, more usually, we do a live migration to another blade which fires up connectivity and we then migrate it back to the original blade. I've had 3 instances of this happen with a specific VM running on a particular blade however it has happened once with a different VM running on a different blade. All VMs and blades have the same basic setup and are running Windows 2008 R2. Any ideas where I should be looking to diagnose the possible causes of this problem as the event logs provide no help? Edit: I've checked that each blade is running the latest NIC drivers and all seem to be fine. Something that is confusing me - a failover or restart of the VM resolves the issue. Whilst I need to work out the underlying issue that is causing the NICs to hang I'm also concerned that the VM didn't failover to another node which would have solved the outage for me. Is there a way to configure the cluster so that it can tell that the VM guest has lost connectivity and fail it over? As things stand the cluster is assuming that the VM is running happily as I presume Hyper V says everything is great even though there is a problem.

  Read the article

• Cisco 837 not passing UDP traffic properly (was: DNS query problem)

  - by TessellatingHeckler

  We have a setup of ADSL line - Cisco 837 ADSL router - Zyxel ZyWall 35 firewall/NAT - Switch - LAN. It has been fine for years, suddenly DNS resolution stopped working from the LAN to public DNS servers. No changes that I know of, so I can't revert anything. Current behaviour: DNS requests from the LAN using TCP show up in the oubound firewall log, in the Cisco debug log, in the dns-server-firewall, in tcpdump on the DNS server, the answer comes back, it works fine. DNS requests from the LAN using UDP show up in the outbound firewall log, in the Cisco debug log, but does NOT show in the dns-server-firewall, not in tcpdump on the DNS server, times out. DNS requests from the Cisco using UDP show up in the dns-server-firewall and in tcpdump on the DNS server, answer received, works fine. netcat connections to port 53 or a random port by TCP show up in the dns-server-firewall netcat connections to port 53 or a random port by UDP do not show up in the dns-server-firewall Summary: TCP seems fine throughought. UDP works from the Cisco over the ADSL, and it works from the LAN to the Cisco, but it doesn't seem to cross the Cisco 837 properly. Update: confirmed with netcat that any UDP traffic from the LAN is affected, not just traffic to port 53. Update: If I change the firewall's external IP to any other IP in the subnet, this starts working. When I put it back, it stops working. I now suspect it's an ISP issue (does that sound plausible?), and am removing the Cisco config.

  Read the article

• How do I make a Data Validation drop-down exclude blanks?

  - by Iszi

  Related: How can I use non-adjacent cells on another sheet for a Data Validation drop-down, and only show non-blank values? For now, I've worked around the above problem by re-arranging my sheet so all the Data Validation Source cells are in one range. I'm leaving the above question open though, because I think it still poses an interesting problem. However, the issue now is that the Data Validation drop-down isn't working in the way I expected it to (and how I believe others are telling me it should). Even though I've got everything into one named range, Excel still shows blanks in a drop-down that references that range. Setup: Sheet 1 A1= (blank) B1= Header A2= 1 B2= Value1 A3= 2 B3= Value2 A4= 3 B4= Value3 A5= 4 B5= (empty) A6= 5 B6= (empty) A7= 6 B7= (empty) Sheet1!B2:B7 is named Validation Sheet2!A1 is set to use Data Validation with a Source =Validation, and in-cell drop-down. The drop-down in Sheet2!A1 shows: Value1 Value2 Value3 . . . (Dots represent blank lines) How can I get rid of these blank lines in the in-cell drop-down, while still including Sheet1!B5:B7 in the Data Validation Source? Note: I nuked the sheet, and tried it again without column A from Sheet1 (putting values from column B in the above example into column A), and it worked fine. Adding Column A back though, brought the blanks back into the Data Validation drop-down. What do I need to do to keep column A as I want it and keep the in-cell drop-down clean?

  Read the article

• Exchange 2010 OWA - a few questions about using multiple mailboxes

  - by Alexey Smolik

  We have an Exchange 2010 SP2 deployment and we need that our users could access multiple mailboxes in OWA. The problem is that a user (eg John Smith) needs to access not just somebody else's (eg Tom Anderson) mailboxes, but his OWN mailboxes, e.g. in different domains: [email protected], [email protected], [email protected], etc. Of course it is preferable for the user to work with all of his mailboxes from a single window. Such mailboxes can be added as multiple Exchange accounts in Outlook, that works almost fine. But in OWA, there are problems: 1) In the left pane - as I've learned - we can open only Inbox folders from other mailboxes. No way to view all folders like in Outlook? 2) With Send-As permissions set, when trying to send a message from another address, that message is saved in the Sent Items folder of the mailbox that is opened in OWA, and not in the mailbox the message is sent from. The same thing with the trash can. Is there a way to fix that? Also, this problem exists in desktop Outlook when mailboxes are added automatically via the Auto Mapping feature, so that we need to turn it off and add the accounts manually. Is there a simpler workaround? 3) Okay, suppose we only open Inbox folders in the left pane. The problem is that the mailbox names shown there are formed from Display Name attributes. But those names are all identical! All the mailboxes are owned by John Smith, so they should be all named John Smith - so that letter recepient sees "John Smith" in the "from" field, no matter what mailbox it is sent from. Also, the user knows what's his name - no need to tell him. He wants to know what mailbox he works with. So we need a way to either: a) customize OWA to show mailbox email address instead of user Display Name, or b) make Exchange use another attribute to put in the "from" field when sending letters 4) Okay, we can switch between mailboxes using "Open Other Mailbox" in the upper-right corner menu. But: a) To select a mailbox we need to enter its name (or first letters). It there a way to show a list of links to mailboxes the user has full access to? Eg in the page header... b) If we start entering the first letters, we see a popup list with possible mailboxes to be opened. But there are all mailboxes (apparently from GAL), not only mailboxes the user has permission to open! How to filter that popup list? c) The same problem as in (3) with mailbox naming. We can see the opened mailbox email address ONLY in the page URL, which is insufficient for many users. In the left pane we see "John Smith" which is useless. 5) Each mailbox is tied with a separate user in AD. If one has several mailboxes, we need to have additional dummy AD accounts, create additional OUs to store them, etc. That's not very nice, is there any standartized, optimal way to build such a structure? We would really appreciate any answers or additional info for any of these questions. Thank you in advance.

  Read the article

• Azure can't ping or telnet VM from client

  - by Raif

  I have a VM on Azure with an instance sqlserver 2012 running on it. From my work computer and my home computer I can't get sqlserver management studio connect to it. I have looked at ALL the settings recommended in numerous articles. everything is setup correctly. endpoint 1433 Private and public sqlserver tcp enabled. sqlserver tcp listening on right port sqlserver using mixed auth windows fire wall, holes poked and then disabled on both client and VM can log in from VM using the credentials that I'm trying to use remotely further more I can't ping the dns or ip or tellnet address from my local machines. I can however hit the iis from a browser using the ip. strange. CS asked me to download MS Network Monitor, which I did and pinged and telneted. I have the results saved but can't really make heads or tails of them. CS hasn't responded yet. I can post some info here that would help. EDIT Never one to shrink from a challenge, I deleted my VM and re-did everything. Now it works although my confidence azure is somewhat shaken.

  Read the article

• Can a wifi AP act as a client, and a server at the same time?

  - by nbolton

  I feel this is SF worthy (as opposed to SU) as I go into a bit of detail on gateways/routing. Here's my ideal setup (if possible) -- there is a wifi network (lets call it bob's) with which I want access to, but I have a few other computers on my network which I want to keep behind a firewall. So I was thinking of buying a wireless access point so that I could set it up to connect to bob's network from the AP, and then from my server, connect to the AP via ethernet. So that's the first bit. Second part is that I want to have my own private wifi network off the back of this; can I then tell the AP to serve a new network called foobar. When I say private network, I mean that my server is actually a Debian linux install with routing configured (and I also do some QoS stuff on, etc). So ideally, I'd like all the clients on the private network to be behind the server in terms of routing. However, if the private clients connect to the server via wifi, then aren't they exposed to the "public" network? That is, if someone is savvy enough to scan for my IP range. Also, to do routing I'd need to connect two ethernet cables between the server and the AP (because you can't do routing/QoS on virtual devices) -- which isn't a problem really; but I'm not sure whether the AP will allow me to separate the public and private LANs. Or, as well as the AP, am I better getting a wifi-to-ethernet adapter for the server? I could use a wifi usb, but this can be tricky to set up on headless linux; plus the signal strength is a bit lousy. If this question is a bit vague/spurious in places, please comment and I will explain in more detail.

  Read the article

< Previous Page | 572 573 574 575 576 577 578 579 580 581 582 583  | Next Page >