Search Results

Search found 18700 results on 748 pages for 'isolated network'.

Page 579/748 | < Previous Page | 575 576 577 578 579 580 581 582 583 584 585 586  | Next Page >

• How to configure multiple addresses on a single interface using Fedora 16

  - by cg.

  I upgraded from Fedora 14 to 16, recently. I had two static IP v4 addresses configured on my ethernet interface by creating two files in /etc/sysconfig/network-scripts: ifcfg-eth0 -> first address ifcfg-eth0:1 -> second address After the upgrade, this resulted in an error message during the boot process and in only the second address being successfully configured on the interface. So, what is the correct way to configure multiple addresses on a single interface on Fedora 16? I could not find anything on this subject in the documentation so far.

  Read the article

• Workaround for API limits [closed]

  - by blunders

  Problem: Planning on building out a client services company that requires access to APIs. Most APIs are limited based on user, IP, etc. - and even though the API calls would be on a per client basis, there's no way to get usage not tied to IPs. (Theoretical) Solution: Have each client install on their network a proxy/VPN that would allow my systems to connect and use their assigned usage. So, it's possible there's a better solution than the one I've thought of, but it's the only one I've been able to come up with.

  Read the article

• Google Music Player doesn't work

  - by EricoPF

  I'm trying to log in on Google Music Player application but doesn't work. I get the message below: Login Failed Could not identify your computer. Learn More On Google Help it says that it doesn't run on virtual machines, which is not my case, but I have a virtualbox installed though, and it says some people get to work if they disable their bridge network. The thing is I don't have any bridge interface, even if I remove all virtualbox modules I still get this message. This is my ifconfig output: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:15374 errors:0 dropped:0 overruns:0 frame:0 TX packets:15374 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1455889 (1.4 MB) TX bytes:1455889 (1.4 MB) wlan0 Link encap:Ethernet HWaddr 94:db:c9:b2:1b:d7 inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::96db:c9ff:feb2:1bd7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:828467 errors:0 dropped:0 overruns:0 frame:0 TX packets:568040 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1086663025 (1.0 GB) TX bytes:72984931 (72.9 MB) Any ideias ? Thanks guys! Cheers.

  Read the article

• Cannot connect to internet with Clearwire modem

  - by ide

  I'm currently using a Motorola WiMAX modem (CPEi 25725) and cannot connect to the internet. I can connect to the modem at 192.168.15.1 and check its status. It says that it has good/excellent connectivity to the internet and shows all five signal bars. Additionally it has sent and received some WiMAX packets so I believe it is connected to a tower. I'm at a loss for what the problem is. Unplugging the modem, restarting it from software, and restarting my computer (Windows 7) have not helped. Windows still reports that it is not connected to the internet. Alternatively, could this be an ISP issue? I have heard that Clearwire is a not-so-reputable ISP that blocks VoIP, and I was using Skype recently. EDIT: I called Clear's tech support and apparently their network is having significant problems at the moment. Guess there's nothing an end-user can do about it.

  Read the article

• How to access Ubuntu Server from local PC?

  - by Roland

  Today I installed my first web server, which is Ubuntu 12.04 LTS. I got Apache, PHP and MySql working, there is even MyPHPAdmin! Everything is working fine on that PC, but the problem is that I have no idea how to connect to this server from my PC. Just to clarify- I got one PC that I work on and got another one, which has Ubuntu Server running. I even managed to connect them through the router, which I made to work as a switch. I can see the Ubuntu Server on my Windows PC in "Network", but it's empty, I can't see any files. I tried to share a folder etc/www on Server, but it shows an error saying something about right, that I'm not this folder's owner. I guess I'm not doing the right thing at all, am I? Even if I could see shared folder on my Windows PC- I would still be not able to type "somedomain.com" on Windows PC and access for example index.php or MySql database. So, the question is- how do I configure Ubuntu Server to be accessible from Windows PC?

  Read the article

• SQL Server 2012 LocalDB

  - by user3061846

  I´m a noobie so please be patient ! I developed an app using C# and SQL Server Express 2012 with a local database, my connection string is"Data Source=localhost ; Initial Catalog = scalnet ; Integrated Security=SSPI; Trusted_Connection=Yes"; Everything worked ok till the time I made a setup and tried to install my app in another computer. My first question is: - What version of SQL should I install is this machine? it should be as ligth as possible. - I tried to install SQL exprees 2012 but it gives me an error when I execute my app "A network related or instance specific error occurred while establishing a ..... (provider:Named Pipes Provider, error:40 - Could not open a connection to SQL server." This probably should be a problem with the server configuration but I have no ideia how to solve this... Can anyone point me to the rigth direction ? ? Thanks

  Read the article

• When opening any file in excel, a 1 is added to ther name, and the default is to save a new copy…

  - by Chris

  Ok... I've searched a lot for this, but it's not an easy question to search for! When I open any files (xls, or xlsx) in Excel 2007, excel acts like it's a read only file, essentially creating a new file with the name plus a 1 on the end... Eg. I open NewDoc.xlsx Excel opens it as NewDoc1.xlsx and the save button brings up the save as dialogue in my default folder. Does anyone know how to set it back to allowing me to open, edit and save a document without having to browse to the original document and save over it!? My immediate thought was access permissions, but the file is in a network folder with my user given Full Control, I also tried creating a new file in that folder, and also on my local machine just in case - same result. To make it even stranger, if I browse to the original file using the save as dialogue, it will let me save over the original, without any further prompts.

  Read the article

• Created a new zone in DNS manager - can't get site bindings to work in iis 7

  - by nick gowdy

  Firstly I would like to say that I am a noob when it comes to DNS, I am a web developer and I am trying to setup an intranet site for a charity. I have windows server 2008 and I installed both iis 7 and dns manager. In IIS I have this binding that works - Type: http:// IP Address: 192.168.1.9 Port: 80 Host name: My host name is empty and when I try to navigate to this website on the network, the http code is 200 and the page renders. Now if I try Host name of test.organization.intranet Internet explorer says "Internet Explorer cannot display the webpage" and the server response is aborted. In DNS manager I created a new forward lookup zone of organization.intranet I did this through the configure a dns server wizard and I created a host (A) with the same IP as the one being used in IIS. The full Host name is test.organization.intranet but it doesn't work. Maybe I am missing something obvious because it's not an area of IT that I know very well, but I am stuck for why I can't get it to work.

  Read the article

• PHP and MySQL related Problem

  - by Tareq

  Hi friends, I have a local LAN to my office. Recently I designed a New Software system using PHP, MySQL for my office. My boss wants to see the reports from online. My problem is, my network connection is often failed to my office. But I have to input all time. So, now I want to use two instances of my software. One will be using the LAN and one will be uploaded to my server. My question is, how can I easily keep the both databases up-to-date always? Please help me with this issue. If you want more info please feel free to ask me.

  Read the article

• New whitepaper: Evolution from the Traditional Data Center to Exalogic: An Operational Perspective

  - by Javier Puerta

  IT organizations are struggling with the need to balance the day-to-day concerns of data center management against the business level requirements to deliver long-term value. This balancing act has proven difficult and inefficient: systems and application management tools are resource intensive and traditional infrastructure management architectures have developed over time on a project by project basis. These traditional management systems consist of multiple tools that require administrators to waste time performing too many steps to handle routine administrative tasks. Operational efficiency and agility in your enterprise are directly linked to the capabilities provided by the management layer across the entire stack, from the application, middleware, operating system, compute, network and storage. Only when this end to end capability is provided will we experience the full benefit of a scalable, efficient, responsive and secure datacenter. Managing Exalogic is substantially less complex and error prone than managing traditional systems built from individually sourced, multi-vendor components because Exalogic is designed to be administered and maintained as a single, integrated system (Figure 1). It is at the forefront of the industry-wide shift away from costly and inferior one-off platforms toward private clouds and Engineered Systems. Read the full whitepaper "Evolution from the Traditional Data Center to Exalogic: An Operational Perspective". Full document is available for download at the Exadata Partner Community Collaborative Workspace (for community members only - if you get an error message, please register for the Community first).

  Read the article

• New Whitepaper: Evolution from the Traditional Data Center to Exalogic: An Operational Perspective

  - by Javier Puerta

  IT organizations are struggling with the need to balance the day-to-day concerns of data center management against the business level requirements to deliver long-term value. This balancing act has proven difficult and inefficient: systems and application management tools are resource intensive and traditional infrastructure management architectures have developed over time on a project by project basis. These traditional management systems consist of multiple tools that require administrators to waste time performing too many steps to handle routine administrative tasks. Operational efficiency and agility in your enterprise are directly linked to the capabilities provided by the management layer across the entire stack, from the application, middleware, operating system, compute, network and storage. Only when this end to end capability is provided will we experience the full benefit of a scalable, efficient, responsive and secure datacenter. Managing Exalogic is substantially less complex and error prone than managing traditional systems built from individually sourced, multi-vendor components because Exalogic is designed to be administered and maintained as a single, integrated system (Figure 1). It is at the forefront of the industry-wide shift away from costly and inferior one-off platforms toward private clouds and Engineered Systems. Read the full whitepaper "Evolution from the Traditional Data Center to Exalogic: An Operational Perspective". Full document is available for download at the Exadata Partner Community Collaborative Workspace (for community members only - if you get an error message, please register for the Community first).

  Read the article

• Windows Home Server restore causes computer to be removed from the domain?

  - by unknown (google)

  I restored my Dell M4400 that is a company laptop, and now I get an error when I try to log on and am connected to our corporate network, which says that the domain controller could not be found or that the computer is not part of the domain. Everyone else can log on, so it seems my computer is no longer part of the domain, even though it thinks it is per the settings. One thing of note: my computer crashed on 1/14/10, but I restored from a backup that was made on 12/20/09. So I am not sure if that made a difference? Also, I tried running "gpupdate" to update my group policy, but that did not seem to help. Any ideas? Seems like a bit of a flaw in the backup system for computers that are part of a domain. I guess I wanted to hear from someone with more knowledge about how a computer is recognized as part of a domain to know if this should be expected when doing a restore or if I should file a trouble ticket.

  Read the article

• Win Server 2008 R2 - Mapped shared folder hanging?

  - by M-Tech

  I have recently built a windows 2008 server R2 machine. This is purely for file server purposes and is very much a basic build. All windows updates installed and part of domain. I have setup a shared folder on the C:Drive and added permissions for domain users as co-owners. The client machines run XP SP3 and are part of the domain also. We have a few servers running the same setups on a few of our sites but this one is particular crashes users machines (explorer.exe hangs for at least a few mins) when attempting to access the shared folder. I have turned off the option on the network card for power save aswell still no change. Any help with this is very much appreciated and i look forward to hearing from you ;)

  Read the article

• Windows clients cannot access machine running DHCP server

  - by science9712

  I'm trying to setup a small LAN, using an Ethernet switch, an Arch Linux server, and around 10 Windows XP machines. This network has no outside connections. The Arch machine has a self configured ip address (configured with ip addr add 192.168.0.1 dev eth0), and acts as a DHCP server(using dhcpd). This portion works great, windows clients get IP addresses, the correct gateway settings, perfect. However, the clients cannot connect to each other, or to the dhcp server. When I run ping 192.168.0.1 on any client, I get no response, same happens if I try to ping any other client. On the gateway machine, I can't ping any of the clients either. Any help would be much appreciated!

  Read the article

• XP SP3 PRO - Delayed write failed $mft- can I get which particular file caused the problem ?

  - by user35020

  Hi - I sometimes get that error when resuming from hibernation : Delayed Write Failed : Windows was unable to save all the data for the file G:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. I know this is caused because the hard drive (G:, a usb external drive) which was plugged in when I hibernated was not read at the right moment - or sometimes I simply forgot to plug it when resuming from hibernation. My question is : is there any way to see which particular file/folder/folder status/don't know what failed to be written ? Hard drive functions correctly before and after - no problem. Is there a detailed log someplace or a utility ? Searched and searched but nothing. Thanks for any help !

  Read the article

• Exadata???DiskGroup

  - by Liu Maclean(???)

  Exadata???Asm Diskgroup ???????: 1.??dcli -g /home/oracle/cell_group -l root cellcli -e list griddisk ????active?griddisk [root@dm01db01 ~]# dcli -g /home/oracle/cell_group -l root cellcli -e list griddisk dm01cel01: DATA_DM01_CD_00_dm01cel01 active dm01cel01: DATA_DM01_CD_01_dm01cel01 active dm01cel01: DATA_DM01_CD_02_dm01cel01 active dm01cel01: DATA_DM01_CD_03_dm01cel01 active dm01cel01: DATA_DM01_CD_04_dm01cel01 active dm01cel01: DATA_DM01_CD_05_dm01cel01 active dm01cel01: DATA_DM01_CD_06_dm01cel01 active dm01cel01: DATA_DM01_CD_07_dm01cel01 active dm01cel01: DATA_DM01_CD_08_dm01cel01 active dm01cel01: DATA_DM01_CD_09_dm01cel01 active dm01cel01: DATA_DM01_CD_10_dm01cel01 active dm01cel01: DATA_DM01_CD_11_dm01cel01 active dm01cel01: DBFS_DG_CD_02_dm01cel01 active dm01cel01: DBFS_DG_CD_03_dm01cel01 active dm01cel01: DBFS_DG_CD_04_dm01cel01 active dm01cel01: DBFS_DG_CD_05_dm01cel01 active dm01cel01: DBFS_DG_CD_06_dm01cel01 active dm01cel01: DBFS_DG_CD_07_dm01cel01 active dm01cel01: DBFS_DG_CD_08_dm01cel01 active dm01cel01: DBFS_DG_CD_09_dm01cel01 active dm01cel01: DBFS_DG_CD_10_dm01cel01 active dm01cel01: DBFS_DG_CD_11_dm01cel01 active dm01cel01: RECO_DM01_CD_00_dm01cel01 active dm01cel01: RECO_DM01_CD_01_dm01cel01 active dm01cel01: RECO_DM01_CD_02_dm01cel01 active dm01cel01: RECO_DM01_CD_03_dm01cel01 active dm01cel01: RECO_DM01_CD_04_dm01cel01 active dm01cel01: RECO_DM01_CD_05_dm01cel01 active dm01cel01: RECO_DM01_CD_06_dm01cel01 active dm01cel01: RECO_DM01_CD_07_dm01cel01 active dm01cel01: RECO_DM01_CD_08_dm01cel01 active dm01cel01: RECO_DM01_CD_09_dm01cel01 active dm01cel01: RECO_DM01_CD_10_dm01cel01 active dm01cel01: RECO_DM01_CD_11_dm01cel01 active dm01cel02: DATA_DM01_CD_00_dm01cel02 active dm01cel02: DATA_DM01_CD_01_dm01cel02 active dm01cel02: DATA_DM01_CD_02_dm01cel02 active dm01cel02: DATA_DM01_CD_03_dm01cel02 active dm01cel02: DATA_DM01_CD_04_dm01cel02 active dm01cel02: DATA_DM01_CD_05_dm01cel02 active dm01cel02: DATA_DM01_CD_06_dm01cel02 active dm01cel02: DATA_DM01_CD_07_dm01cel02 active dm01cel02: DATA_DM01_CD_08_dm01cel02 active dm01cel02: DATA_DM01_CD_09_dm01cel02 active dm01cel02: DATA_DM01_CD_10_dm01cel02 active dm01cel02: DATA_DM01_CD_11_dm01cel02 active dm01cel02: DBFS_DG_CD_02_dm01cel02 active dm01cel02: DBFS_DG_CD_03_dm01cel02 active dm01cel02: DBFS_DG_CD_04_dm01cel02 active dm01cel02: DBFS_DG_CD_05_dm01cel02 active dm01cel02: DBFS_DG_CD_06_dm01cel02 active dm01cel02: DBFS_DG_CD_07_dm01cel02 active dm01cel02: DBFS_DG_CD_08_dm01cel02 active dm01cel02: DBFS_DG_CD_09_dm01cel02 active dm01cel02: DBFS_DG_CD_10_dm01cel02 active dm01cel02: DBFS_DG_CD_11_dm01cel02 active dm01cel02: RECO_DM01_CD_00_dm01cel02 active dm01cel02: RECO_DM01_CD_01_dm01cel02 active dm01cel02: RECO_DM01_CD_02_dm01cel02 active dm01cel02: RECO_DM01_CD_03_dm01cel02 active dm01cel02: RECO_DM01_CD_04_dm01cel02 active dm01cel02: RECO_DM01_CD_05_dm01cel02 active dm01cel02: RECO_DM01_CD_06_dm01cel02 active dm01cel02: RECO_DM01_CD_07_dm01cel02 active dm01cel02: RECO_DM01_CD_08_dm01cel02 active dm01cel02: RECO_DM01_CD_09_dm01cel02 active dm01cel02: RECO_DM01_CD_10_dm01cel02 active dm01cel02: RECO_DM01_CD_11_dm01cel02 active dm01cel03: DATA_DM01_CD_00_dm01cel03 active dm01cel03: DATA_DM01_CD_01_dm01cel03 active dm01cel03: DATA_DM01_CD_02_dm01cel03 active dm01cel03: DATA_DM01_CD_03_dm01cel03 active dm01cel03: DATA_DM01_CD_04_dm01cel03 active dm01cel03: DATA_DM01_CD_05_dm01cel03 active dm01cel03: DATA_DM01_CD_06_dm01cel03 active dm01cel03: DATA_DM01_CD_07_dm01cel03 active dm01cel03: DATA_DM01_CD_08_dm01cel03 active dm01cel03: DATA_DM01_CD_09_dm01cel03 active dm01cel03: DATA_DM01_CD_10_dm01cel03 active dm01cel03: DATA_DM01_CD_11_dm01cel03 active dm01cel03: DBFS_DG_CD_02_dm01cel03 active dm01cel03: DBFS_DG_CD_03_dm01cel03 active dm01cel03: DBFS_DG_CD_04_dm01cel03 active dm01cel03: DBFS_DG_CD_05_dm01cel03 active dm01cel03: DBFS_DG_CD_06_dm01cel03 active dm01cel03: DBFS_DG_CD_07_dm01cel03 active dm01cel03: DBFS_DG_CD_08_dm01cel03 active dm01cel03: DBFS_DG_CD_09_dm01cel03 active dm01cel03: DBFS_DG_CD_10_dm01cel03 active dm01cel03: DBFS_DG_CD_11_dm01cel03 active dm01cel03: RECO_DM01_CD_00_dm01cel03 active dm01cel03: RECO_DM01_CD_01_dm01cel03 active dm01cel03: RECO_DM01_CD_02_dm01cel03 active dm01cel03: RECO_DM01_CD_03_dm01cel03 active dm01cel03: RECO_DM01_CD_04_dm01cel03 active dm01cel03: RECO_DM01_CD_05_dm01cel03 active dm01cel03: RECO_DM01_CD_06_dm01cel03 active dm01cel03: RECO_DM01_CD_07_dm01cel03 active dm01cel03: RECO_DM01_CD_08_dm01cel03 active dm01cel03: RECO_DM01_CD_09_dm01cel03 active dm01cel03: RECO_DM01_CD_10_dm01cel03 active dm01cel03: RECO_DM01_CD_11_dm01cel03 active ??????????griddisk, ?????’cellcli -e drop griddisk’ ?’cellcli -e create griddisk’????griddisk ,??????drop DBFS_DG???griddisk 2.??ASM???create disk group ?????CELL?IP,????????????? [root@dm01db02 ~]# cat /etc/oracle/cell/network-config/cellip.ora cell="192.168.64.131" cell="192.168.64.132" cell="192.168.64.133" SQL> create diskgroup DATA_MAC normal redundancy 2 DISK 3 'o/192.168.64.131/RECO_DM01_CD_*_dm01cel01' 4 ,'o/192.168.64.132/RECO_DM01_CD_*_dm01cel02' 5 ,'o/192.168.64.133/RECO_DM01_CD_*_dm01cel03' 6 attribute 7 'AU_SIZE'='4M', 8 'CELL.SMART_SCAN_CAPABLE'='TRUE', 9 'compatible.rdbms'='11.2.0.2', 10 'compatible.asm'='11.2.0.2' 11 / 3. MOUNT ???DISKGROUP ALTER DISKGROUP DATA_MAC mount ; 4.???crsctl start/stop resource ora.DATA_MAC.dg ?????

  Read the article

• aptana/eclipse blocks other apps

  - by waquner

  Hi, I've got a fresh win7 installation, the only apps installed so far are aptana (beta 3)/eclipse and firefox + chrome (except antivirus and drivers) Every time I start aptana, chrome and firefox are blocked, so firefox can't load a webpage (or sometimes takes veeeery long) and chrome doesn't even take care of events (so for example hovering over a link doesn't change the cursor and a click does...nothing or typing in an url, press enter - nothing happens) First I thought, aptana downloads something and blocks my internet connection... but IE works well and also there are no signs in the taskmanager (cpu%, network or memory) When I close Aptana, all works as before. I tried updating Java, which didn't help... On my office-computer I use the same apps and it works perfect. Got any ideas? TIA, waquner

  Read the article

• Automatically make or update a copy real-time on another hard drive volume whenever files are saved to a particular folder

  - by mrblint

  Whenever I save or update a file to a particular designated folder on my C:\drive I would like to make or update a copy on my network-attached storage device, ideally saving the copy to the NAS as a version rather than overwriting a copy there, if possible. I have Windows 7 x64 Ultimate. Is there any feature built-in that can accomplish this? It has to be a real copy, not merely a pointer. I'm trying to achieve some redundancy for especially critical documents (in a variety of formats) that change frequently throughout the day. P.S. I am looking for folder-level granularity; I wouldn't want this to happen for every file on the C: volume.

  Read the article

• Simple way to get keys/mouse buttons working in Synergy (mac client, pc server)

  - by Damon

  I'm trying to get Synergy working running as client on my Mac with SynergyKM Preferences panel. It's performing generally fine (just some real slow downs when my network is under heavy use, usually from youtube videos). The main thing I want to get working is none of the special buttons on my mouse are working on the client.. just the scroll and middle click.. but I have back/forward buttons I'd like to have working. Also my Windows Comfort Curve Keyboard has some extra keys and I'd like to know how to set those up to perform operations on my Mac client. I could have sworn that home/end weren't working but they seem to be now.. perhaps it's application specific..

  Read the article

• Tool to track bandwidth by domain name?

  - by Grant Limberg

  I'm running an Ubuntu 10.04 server that hosts several domain names. All domains point to the same IP address and use the same network interface. I'm really only concerned with the main domain name such as my-domain1.com and my-domain2.com. It should include subdomains such as www.my-domain1.com with the totals for my-domain1.com. Is there a tool out there that is configurable to track bandwidth usage on a per-domain name basis? Edit: I'm not looking for only web usage. I'm looking for all traffic.

  Read the article

• What are solutions and tradeoffs to maintain search result consistency in a web application

  - by iammichael

  Consider a web application with a custom search function that must display the results in a paged manner (twenty per page with up to hundreds of thousands of total results) and the ability to drill down to individual results that maintain next/previous links to navigate through the results. Re-executing the search on each page request to get the appropriate results for that page of data can be too expensive (up to 15s per search). Also, since the underlying data can change frequently (e.g. addition of new results), re-executing could cause the next/previous functionality to result in inconsistent behavior (e.g. the same results reappearing on a later page after having been viewed on an earlier page). What options exist to ensure the search results can be viewed across multiple pages in a consistent manner, and what tradeoffs does each option have in terms of network, CPU, memory, and storage requirements? EDIT: I thought caching the query search results was an obvious necessity. The question is really asking about where to cache the result set and what tradeoffs might exist to each. For example, storing the ids of the entities in the result set on the client, or storing the IDs of the entities themselves in the users session on the web server, or in a temporary table in the database. I'm not looking specifically for a single solution as different scenarios may result in different approaches (and such a question would be more suited for stackoverflow.com rather than here), but more of a design comparison between the possible approaches.

  Read the article

• Ubuntu 9.10 Dowload Speed Very Slow

  - by Don

  I'm running Ubuntu 9.10 desktop and I'm new to the Linux world, so bear with me. I'm on a corporate network of 3 T1s shared across 50-60 users. I typically get about 300 KB/sec for downloads, but for whatever reason, the Linux box will start out in that range, then drop to less than 1KB/Sec sometimes. Doesn't seen to matter where I'm downloading from. Right now I'm trying to get Eclipse for PHP and it's running at 3-6KB/sec. Getting the updates for the system will also drop to very slow rates. Our IT person has set up the machine to get the same 10.0.0.x address when it starts, and moved this IP to bypass our Proxy/Firewall going out, so that shouldn't be the issue. Can anyone recommend something I can try to better diagnose the problem. Again, I'm new to the Linux world and the hardware/OS setup side in general (coming form more of a coding background). Thanks for any advice.

  Read the article

• Forward svn port

  - by ankimal

  We have our svn server on a machine not accessible from the internet. But we need to be able to check out code from the internet over ssh. Given that we can do port forwarding on a machine accessible from the internet, whats the best way to set this up? Internet -> A machine on our network - > svn server (Port forward here? ) If not port forwarding, whats the most secure way of doing this, if there is any?

  Read the article

• Unauthorized computer use via keyboard or remote access?

  - by brydaverambo

  I’m suspecting my computer is being used when I’m not at home. This is happening either physically or remotely. My wireless switch is off. Is there any way possible to detect and/or monitor activity without purchasing software? My settings are being changed as well as passwords (Bios PW was changed and I cannot access Bios settings). I connect via the network cable. Is it possible for someone (in range) to connect to my laptop even if the wireless switch is off? This is a Dell Inspiron 1720 with the WLAN 1395 card. Here’s the kicker. When I try to download freeware for monitoring activity, I am not allowed to do this! ????

  Read the article

• syslog log of TCP packet

  - by com

  Occasionally, I noticed a lot of following messsages in syslog Nov {datetime} hostname kernel: [8226528.586232] AIF:PRIV TCP packet: IN=eth0 OUT= MAC={mac} SRC={sourceip} DST={destinationip} LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=20361 DF PROTO=TCP SPT=39950 DPT=37 WINDOW=14600 RES=0x00 SYN URGP=0 On the Internet, I found that DOS attack may cause such type of output, unfortunately, I don't understand what does this log mean. The only thing is clear for me is this log is related to network. The source host is the host where nagios is installed. Does it mean nagios somehow does behave well? And what does it mean at all?

  Read the article

< Previous Page | 575 576 577 578 579 580 581 582 583 584 585 586  | Next Page >