Search Results

Search found 19768 results on 791 pages for 'hardware programming'.

Page 582/791 | < Previous Page | 578 579 580 581 582 583 584 585 586 587 588 589  | Next Page >

  • Transition from 2D to 3D Game development [closed]

    - by jakebird451
    I have been working in the 2D world for a long time from manual blitting in windows to SDL to Python (pygame, pyopengl) and a bunch in between. Needless to say I have been programming for a while. So a while ago I started to program in OpenGL via C++ on my Mac. I then got a little intricate with my work after a while (3D models with skeleton structure and terrain development). After a long time of tinkering, I stopped due to the heavy work just to yield a low level understanding of how OpenGL works. Still interested in Graphics and Game Development I went on a search for a stable game engine with some features to grow on. Licence Requirement: Anything other than GPL (LGPL will do) OS Requirement: Mac & Windows Shader: GLSL or CG (GLSL preferred due to experience) Models: Any model structure with rigging (bone) support & animation I am looking at http://www.ogre3d.org/ currently and am starting to meddle around with some examples. However I am a little reluctant to spend a lot of time on it only to yield another dead end. So instead of falling down a spiraling black pit, I am posting my question to you guys to lead me in the right direction based on my requirements. How was your experience with the engine you recommend? Is it well documented? Does it have well documented examples? Any library requirements (Boost, libpng, etc)?

    Read the article

  • My cpus are powered down periodically

    - by mgiammarco
    I post here because I am using Ubuntu but this is probably an hardware problem. Since I bought my new setup with AMD Athlon(tm) II X4 635 Processor and asus m4a89td pro/usb3 motherboard with ecc ram I have stuttering on videos. I was using ubuntu 11.10 now ubuntu 12.10. Looking at syslog I have found that periodically (I notice only on videos but it happens always) this thing happens: Mar 6 23:36:42 virtual1 kernel: [28564.375548] smpboot: CPU 1 is now offline Mar 6 23:36:42 virtual1 kernel: [28564.380751] smpboot: CPU 2 is now offline Mar 6 23:36:42 virtual1 kernel: [28564.394947] smpboot: CPU 3 is now offline Mar 6 23:36:48 virtual1 kernel: [28569.917021] smpboot: Booting Node 0 Processor 1 APIC 0x1 Mar 6 23:36:48 virtual1 kernel: [28569.928015] LVT offset 0 assigned for vector 0xf9 Mar 6 23:36:48 virtual1 kernel: [28569.928372] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu Mar 6 23:36:48 virtual1 kernel: [28569.928378] perf: IBS APIC setup failed on cpu #1 Mar 6 23:36:48 virtual1 kernel: [28569.931305] process: Switch to broadcast mode on CPU1 Mar 6 23:36:48 virtual1 kernel: [28569.934255] smpboot: Booting Node 0 Processor 2 APIC 0x2 Mar 6 23:36:48 virtual1 kernel: [28569.945554] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu Mar 6 23:36:48 virtual1 kernel: [28569.945558] perf: IBS APIC setup failed on cpu #2 Mar 6 23:36:48 virtual1 kernel: [28569.948124] process: Switch to broadcast mode on CPU2 Mar 6 23:36:48 virtual1 kernel: [28569.949644] smpboot: Booting Node 0 Processor 3 APIC 0x3 Mar 6 23:36:48 virtual1 kernel: [28569.960838] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu Mar 6 23:36:48 virtual1 kernel: [28569.960840] perf: IBS APIC setup failed on cpu #3 Mar 6 23:36:48 virtual1 kernel: [28569.962953] process: Switch to broadcast mode on CPU3 I have: updated bios; tried all (really) bios options; changed ram; changed psu and cpu cooler; tried 3.8.1 kernel. What can I do now? Please help me! Thanks, Mario

    Read the article

  • Project Jigsaw: Late for the train: The Q&A

    - by Mark Reinhold
    I recently proposed, to the Java community in general and to the SE 8 (JSR 337) Expert Group in particular, to defer Project Jigsaw from Java 8 to Java 9. I also proposed to aim explicitly for a regular two-year release cycle going forward. Herewith a summary of the key questions I’ve seen in reaction to these proposals, along with answers. Making the decision Q Has the Java SE 8 Expert Group decided whether to defer the addition of a module system and the modularization of the Platform to Java SE 9? A No, it has not yet decided. Q By when do you expect the EG to make this decision? A In the next month or so. Q How can I make sure my voice is heard? A The EG will consider all relevant input from the wider community. If you have a prominent blog, column, or other communication channel then there’s a good chance that we’ve already seen your opinion. If not, you’re welcome to send it to the Java SE 8 Comments List, which is the EG’s official feedback channel. Q What’s the overall tone of the feedback you’ve received? A The feedback has been about evenly divided as to whether Java 8 should be delayed for Jigsaw, Jigsaw should be deferred to Java 9, or some other, usually less-realistic, option should be taken. Project Jigsaw Q Why is Project Jigsaw taking so long? A Project Jigsaw started at Sun, way back in August 2008. Like many efforts during the final years of Sun, it was not well staffed. Jigsaw initially ran on a shoestring, with just a handful of mostly part-time engineers, so progress was slow. During the integration of Sun into Oracle all work on Jigsaw was halted for a time, but it was eventually resumed after a thorough consideration of the alternatives. Project Jigsaw was really only fully staffed about a year ago, around the time that Java 7 shipped. We’ve added a few more engineers to the team since then, but that can’t make up for the inadequate initial staffing and the time lost during the transition. Q So it’s really just a matter of staffing limitations and corporate-integration distractions? A Aside from these difficulties, the other main factor in the duration of the project is the sheer technical difficulty of modularizing the JDK. Q Why is modularizing the JDK so hard? A There are two main reasons. The first is that the JDK code base is deeply interconnected at both the API and the implementation levels, having been built over many years primarily in the style of a monolithic software system. We’ve spent considerable effort eliminating or at least simplifying as many API and implementation dependences as possible, so that both the Platform and its implementations can be presented as a coherent set of interdependent modules, but some particularly thorny cases remain. Q What’s the second reason? A We want to maintain as much compatibility with prior releases as possible, most especially for existing classpath-based applications but also, to the extent feasible, for applications composed of modules. Q Is modularizing the JDK even necessary? Can’t you just put it in one big module? A Modularizing the JDK, and more specifically modularizing the Java SE Platform, will enable standard yet flexible Java runtime configurations scaling from large servers down to small embedded devices. In the long term it will enable the convergence of Java SE with the higher-end Java ME Platforms. Q Is Project Jigsaw just about modularizing the JDK? A As originally conceived, Project Jigsaw was indeed focused primarily upon modularizing the JDK. The growing demand for a truly standard module system for the Java Platform, which could be used not just for the Platform itself but also for libraries and applications built on top of it, later motivated expanding the scope of the effort. Q As a developer, why should I care about Project Jigsaw? A The introduction of a modular Java Platform will, in the long term, fundamentally change the way that Java implementations, libraries, frameworks, tools, and applications are designed, built, and deployed. Q How much progress has Project Jigsaw made? A We’ve actually made a lot of progress. Much of the core functionality of the module system has been prototyped and works at both compile time and run time. We’ve extended the Java programming language with module declarations, worked out a structure for modular source trees and corresponding compiled-class trees, and implemented these features in javac. We’ve defined an efficient module-file format, extended the JVM to bootstrap a modular JRE, and designed and implemented a preliminary API. We’ve used the module system to make a good first cut at dividing the JDK and the Java SE API into a coherent set of modules. Among other things, we’re currently working to retrofit the java.util.ServiceLoader API to support modular services. Q I want to help! How can I get involved? A Check out the project page, read the draft requirements and design overview documents, download the latest prototype build, and play with it. You can tell us what you think, and follow the rest of our work in real time, on the jigsaw-dev list. The Java Platform Module System JSR Q What’s the relationship between Project Jigsaw and the eventual Java Platform Module System JSR? A At a high level, Project Jigsaw has two phases. In the first phase we’re exploring an approach to modularity that’s markedly different from that of existing Java modularity solutions. We’ve assumed that we can change the Java programming language, the virtual machine, and the APIs. Doing so enables a design which can strongly enforce module boundaries in all program phases, from compilation to deployment to execution. That, in turn, leads to better usability, diagnosability, security, and performance. The ultimate goal of the first phase is produce a working prototype which can inform the work of the Module-System JSR EG. Q What will happen in the second phase of Project Jigsaw? A The second phase will produce the reference implementation of the specification created by the Module-System JSR EG. The EG might ultimately choose an entirely different approach than the one we’re exploring now. If and when that happens then Project Jigsaw will change course as necessary, but either way I think that the end result will be better for having been informed by our current work. Maven & OSGi Q Why not just use Maven? A Maven is a software project management and comprehension tool. As such it can be seen as a kind of build-time module system but, by its nature, it does nothing to support modularity at run time. Q Why not just adopt OSGi? A OSGi is a rich dynamic component system which includes not just a module system but also a life-cycle model and a dynamic service registry. The latter two facilities are useful to some kinds of sophisticated applications, but I don’t think they’re of wide enough interest to be standardized as part of the Java SE Platform. Q Okay, then why not just adopt the module layer of OSGi? A The OSGi module layer is not operative at compile time; it only addresses modularity during packaging, deployment, and execution. As it stands, moreover, it’s useful for library and application modules but, since it’s built strictly on top of the Java SE Platform, it can’t be used to modularize the Platform itself. Q If Maven addresses modularity at build time, and the OSGi module layer addresses modularity during deployment and at run time, then why not just use the two together, as many developers already do? A The combination of Maven and OSGi is certainly very useful in practice today. These systems have, however, been built on top of the existing Java platform; they have not been able to change the platform itself. This means, among other things, that module boundaries are weakly enforced, if at all, which makes it difficult to diagnose configuration errors and impossible to run untrusted code securely. The prototype Jigsaw module system, by contrast, aims to define a platform-level solution which extends both the language and the JVM in order to enforce module boundaries strongly and uniformly in all program phases. Q If the EG chooses an approach like the one currently being taken in the Jigsaw prototype, will Maven and OSGi be made obsolete? A No, not at all! No matter what approach is taken, to ensure wide adoption it’s essential that the standard Java Platform Module System interact well with Maven. Applications that depend upon the sophisticated features of OSGi will no doubt continue to use OSGi, so it’s critical that implementations of OSGi be able to run on top of the Java module system and, if suitably modified, support OSGi bundles that depend upon Java modules. Ideas for how to do that are currently being explored in Project Penrose. Java 8 & Java 9 Q Without Jigsaw, won’t Java 8 be a pretty boring release? A No, far from it! It’s still slated to include the widely-anticipated Project Lambda (JSR 335), work on which has been going very well, along with the new Date/Time API (JSR 310), Type Annotations (JSR 308), and a set of smaller features already in progress. Q Won’t deferring Jigsaw to Java 9 delay the eventual convergence of the higher-end Java ME Platforms with Java SE? A It will slow that transition, but it will not stop it. To allow progress toward that convergence to be made with Java 8 I’ve suggested to the Java SE 8 EG that we consider specifying a small number of Profiles which would allow compact configurations of the SE Platform to be built and deployed. Q If Jigsaw is deferred to Java 9, would the Oracle engineers currently working on it be reassigned to other Java 8 features and then return to working on Jigsaw again after Java 8 ships? A No, these engineers would continue to work primarily on Jigsaw from now until Java 9 ships. Q Why not drop Lambda and finish Jigsaw instead? A Even if the engineers currently working on Lambda could instantly switch over to Jigsaw and immediately become productive—which of course they can’t—there are less than nine months remaining in the Java 8 schedule for work on major features. That’s just not enough time for the broad review, testing, and feedback which such a fundamental change to the Java Platform requires. Q Why not ship the module system in Java 8, and then modularize the platform in Java 9? A If we deliver a module system in one release but don’t use it to modularize the JDK until some later release then we run a big risk of getting something fundamentally wrong. If that happens then we’d have to fix it in the later release, and fixing fundamental design flaws after the fact almost always leads to a poor end result. Q Why not ship Jigsaw in an 8.5 release, less than two years after 8? Or why not just ship a new release every year, rather than every other year? A Many more developers work on the JDK today than a couple of years ago, both because Oracle has dramatically increased its own investment and because other organizations and individuals have joined the OpenJDK Community. Collectively we don’t, however, have the bandwidth required to ship and then provide long-term support for a big JDK release more frequently than about every other year. Q What’s the feedback been on the two-year release-cycle proposal? A For just about every comment that we should release more frequently, so that new features are available sooner, there’s been another asking for an even slower release cycle so that large teams of enterprise developers who ship mission-critical applications have a chance to migrate at a comfortable pace.

    Read the article

  • Html 5 clock, part ii - CSS marker classes and getElementsByClassName

    - by Norgean
    The clock I made in part i displays the time in "long" - "It's a quarter to ten" (but in Norwegian). To save space, some letters are shared, "sevenineight" is four letters shorter than "seven nine eight". We only want to highlight the "correct" parts of this, for example "sevenineight". When I started programming the clock, each letter had its own unique ID, and my script would "get" each element individually, and highlight / hide each element according to some obscure logic. I quickly realized, despite being in a post surgery haze, …this is a stupid way to do it. And, to paraphrase NPH, if you find yourself doing something stupid, stop, and be awesome instead. We want an easy way to get all the items we want to highlight. Perhaps we can use the new getElementsByClassName function? Try to mark each element with a classname or two. So in "sevenineight": 's' is marked as 'h7', and the first 'n' is marked with both 'h7' and 'h9' (h for hour). <div class='h7 h9'>N</div><div class='h9'>I</div> getElementsByClassName('h9') will return the four letters of "nine". Notice that these classes are not backed by any CSS, they only appear directly in html (and are used in javascript). I have not seen classes used this way elsewhere, and have chosen to call them "marker classes" - similar to marker interfaces - until somebody comes up with a better name.

    Read the article

  • Removing ocurrances of characters in a string

    - by DmainEvent
    I am reading this book, programming Interviews exposed by John Wiley and sons and in chapter 6 they are discussing removing all instances of characters in a src string using a removal string... so removeChars(string str, string remove) In there writeup they sey the steps to accomplish this are to have a boolean lookup array with all values initially set to false, then loop through each character in remove setting the corresponding value in the lookup array to true (note: this could also be a hash if the possible character set where huge like Unicode-16 or something like that or if str and remove are both relatively small... < 100 characters I suppose). You then iterate through the str with a source and destination index, copying each character only if its corresponding value in the lookup array is false... Which makes sense... I don't understand the code that they use however... They have for(src = 0; src < len; ++src){ flags[r[src]] == true; } which is turning the flag value at the remove string indexed at src to true... so if you start out with PLEASE HELP as your str and LEA as your remove you will be setting in your flag table at 0,1,2... t|t|t but after that you will get an out of bounds exception because r doesn't have have anything greater than 2 in it... even using there example you get an out of bounds exception... Am is there code example unworkable?

    Read the article

  • Gain More From Your Oracle Investments

    - by Oracle OpenWorld Blog Team
    By Yaldah Hakim, Oracle Managed Cloud ServicesOracle Managed Cloud Services enables organizations to leverage their Oracle investments by extending them into the cloud—for greater value, choice, and confidence. At Oracle OpenWorld, Oracle Managed Cloud Services has numerous activities and educational sessions planned so you can explore how your organization will benefit from the power of Oracle software and hardware in the cloud.Here are just a few of the Oracle Managed Cloud Services breakout sessions you can attend Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} : Moving into the Cloud with Oracle Cloud Services Upgrade your Oracle Applications into the Cloud Cloud Services: Security and Compliance in the Cloud  And don’t forget to check out the Oracle Cloud Services Lounge at Moscone West Level 3, where you can schedule one-on-one meetings with the cloud services experts.  Lounge Hours:Monday, October 1: 10:00 a.m. - 6:00 p.m.Tuesday, October 2: 10:00 a.m. - 6:00 p.m.Wednesday, October 3: 10:00 a.m. - 4:00 p.m.Thursday, October 4: 10:00 a.m. - 2:00 p.m. For a schedule of all Managed Cloud Services activities at Oracle OpenWorld, go here.

    Read the article

  • How do I get others to see past my prior inexperience?

    - by Kevin
    My core question is how do I proceed from the following predicament. I will be honest with you, I wasted my College Experience. I slacked off and didn't take any of my comp sci classes that seriously, somehow i still got out with a 3.25 GPA. But truth be told I learned nothing. I befriended most of my professors who went pretty lenient on me in terms of grading. However, I basically came out of College knowing how to program a simple calculator in VB.Net. I was (to my great surprise) hired by a very large respected company in Denver as a Junior developer. Well the long and the short of it is that I knew so little about programming that I quickly became the office pariah and was almost fired due to my incompetence. It has been 8 months now and I feel I have learned some basic things and I am not as picked on as I used to be by the other developers. However, everyone hates me and the first few months have given the other developers a horrible perception of me. I am no longer afraid of code or learning, but I have put my self in the precarious position of being the scapegoat of our department. I hate going to work every day because no one there is my friend and pretty much everyone is hostile to me. What should I do? Any advice?

    Read the article

  • How to shift a vector based on the rotation of another vector?

    - by bpierre
    I’m learning 2D programming, so excuse my approximations, and please, don’t hesitate to correct me. I am just trying to fire a bullet from a player. I’m using HTML canvas (top left origin). Here is a representation of my problem: The black vector represent the position of the player (the grey square). The green vector represent its direction. The red disc represents the target. The red vector represents the direction of a bullet, which will move in the direction of the target (red and dotted line). The blue cross represents the point from where I really want to fire the bullet (and the blue and dotted line represents its movement). This is how I draw the player (this is the player object. Position, direction and dimensions are 2D vectors): ctx.save(); ctx.translate(this.position.x, this.position.y); ctx.rotate(this.direction.getAngle()); ctx.drawImage(this.image, Math.round(-this.dimensions.x/2), Math.round(-this.dimensions.y/2), this.dimensions.x, this.dimensions.y); ctx.restore(); This is how I instanciate a new bullet: var bulletPosition = playerPosition.clone(); // Copy of the player position var bulletDirection = Vector2D.substract(targetPosition, playerPosition).normalize(); // Difference between the player and the target, normalized new Bullet(bulletPosition, bulletDirection); This is how I move the bullet (this is the bullet object): var speed = 5; this.position.add(Vector2D.multiply(this.direction, speed)); And this is how I draw the bullet (this is the bullet object): ctx.save(); ctx.translate(this.position.x, this.position.y); ctx.rotate(this.direction.getAngle()); ctx.fillRect(0, 0, 3, 3); ctx.restore(); How can I change the direction and position vectors of the bullet to ensure it is on the blue dotted line? I think I should represent the shift with a vector, but I can’t see how to use it.

    Read the article

  • Cannot Create Bootable USB Drive from .iso file

    - by tarabyte
    I've tried formatting the flash drive as FAT as well as Mac OS journaled through diskutility but still cannot successfully create a bootable drive. I'm following the directions here exactly: http://www.ubuntu.com/download/help/create-a-usb-stick-on-mac-osx Environment: Macbook Pro trying to create a bootable flash drive for a Macbook Pro. 8GB flash drive. Tested ubuntu-12.04.1 as well as ubuntu 12.20 .iso 64-bit downloads. Nothing to repair in disk utility for this hard drive. Every time I finish step 8 of the tutorial I get "file system not recognized" with the options to "initialize" meaning to reformat my drive, "ignore" or "eject." When I try to re-inspect the flash drive in disk utility after plugging it back in I see that it has some error when I try to verify it but the "repair" button is disabled. I just want to boot to ubuntu when my mac first starts up. Oh the pain. http://lifehacker.com/5934942/how-to-dual-boot-linux-on-your-mac-and-take-back-your-powerhouse-apple-hardware "linux is free insomuch as your time is worthless" - old wise man

    Read the article

  • Designs for outputting to a spreadsheet

    - by Austin Moore
    I'm working on a project where we are tasked to gather and output various data to a spreadsheet. We are having tons of problems with the file that holds the code to write the spreadsheet. The cell that the data belongs to is hardcoded, so anytime you need to add anything to the middle of the spreadsheet, you have to increment the location for all the fields after that in the code. There are random blank rows, to add padding between sections, and subsections within the sections, so there's no real pattern that we can replicate. Essentially, anytime we have to add or change anything to the spreadsheet it requires a many long and tedious hours. The code is all in this one large file, hacked together overtime in Perl. I've come up with a few OO solutions, but I'm not too familiar with OO programming in Perl and all my attempts at it haven't been great, so I've shied away from it so far. I've suggested we handle this section of the program with a more OO friendly language, but we can't apparently. I've also suggested that we scrap the entire spreadsheet idea, and just move to a webpage, but we can't do that either. We've been working on this project for a few months, and every time we have to change that file, we all dread it. I'm thinking it's time to start some refactoring. However, I don't even know what could make this file easier to work with. The way the output is formatted makes it so that it has to be somewhat hardcoded. I'm wondering if anyone has insight on any design patterns or techniques they have used to tackle a similar problem. I'm open to any ideas. Perl specific answers are welcome, but I am also interested in language-agnostic solutions.

    Read the article

  • Genetic Algorithm new generation exponentially increasing

    - by Rdz
    I'm programming Genetic Algorithm in C++ and after searching all kind of ways of doing GA'a operators (selection, crossover, mutation) I came up with a doubt. Let's say I have an initial population of 500. My selection will consist in getting the top 20% of 500(based on best fitness). So I get 100 individuals to mate. When I do the crossover I'll get 2 children where both together have 50% of surviving. So far so good. I start the mutation, and everything's ok.. Now when I start choosing the Next generation, I see that I have a big number of children (in this case, 4950 if you wanna know). Now the thing is, every time I run GA, if I send all the children to the next generation, the number of individuals per generation will increase exponentially. So there must be a way of choosing the children to fulfill a new generation without getting out of this range of the initial population. What I'm asking here is if there is anyway of choosing the children to fill the new generations OR should I choose somehow (and maybe reduce) the parents to mate so I don't get so many children in the end. Thanks :)

    Read the article

  • Tomcat + Spring + CI workflow

    - by ex3v
    We're starting our very first project with Spring and java web stack. This project will be mainly about rewriting quite large ERP/CRM from Zend Framework to Java. Important factor in my question is that I come from php territory, where things (in terms of quality) tend to look different than in java world. Fatcs: there will be 2-3 developers, at least one of developers uses Windows, rest uses Linux, there is one remote linux-based machine, which should handle test and production instances, after struggling with buggy legacy code, we want to introduce good programming and development practices (CI, tests, clean code and so on) client: internal, frequent business logic changes, scrum, daily deployments What I want to achieve is good workflow on as many development stages as possible (coding - commiting - testing - deploying). The problem is that I've never done this before, so I don't know what are best practices to do this. What I have so far is: developers code locally, there is vagrant instance on every development machine, managed by puppet. It contains the same linux, jenkins and tomcat versions as production machine, while coding, developer deploys to vagrant machine, after local merge to test branch, jenkins on vagrant handles tests, when everything is fine, developer pushes commits and merges jenkins on remote machine pulls commit from test branch, runs tests and so on, if everything looks green, jenkins deploys to test tomcat instance Deployment to production is manual (altough it can be done using helping scripts) when business logic is tested by other divisions and everything looks fine to client. Now, the real question: does above make any sense? Things that I'm not sure about: Remote machine: won't there be any problems with two (or even three, as jenkins might need one) instances of same app on tomcat? Using vagrant to develop on php environment is just vise. Isn't this overkill while using Tomcat? I mean, is there higher probability that tomcat will act the same on every machine? Is there sense of having local jenkins on vagrant?

    Read the article

  • Valid reason for employer to breach freelance contract

    - by Costas
    Please don't close this as offtopic. According to the FAQ I can post programming related questions. I was working on a project and when it was half way completed (1 weeks work), the employer backs out and refuses to pay me. Shortly before this he was being very rude. He was having problems configuring the server and he told me it was my fault and that I had to fix it. After I spent several hours trying to figure out the problem, it turned out to be his fault. After this when I put the code on the server. He found 1 bug that I had missed. He freaked out, accused me of being a bad programmer and told me that the code was shit and that he couldn't use it. He said that if there is a bug in the code, that means the code is bad and he can't use it. He would have to throw the code away and hire someone else. His kept reiterating his argument: "why should I pay for code that I can't use". And I kept telling him the code was fine and urged him to have another programmer give him a second opinion. But he would have none of that. He said he would compensate me for my troubles by paying me 250$. Then he changes his mind and lowers that to 200$. Then a third time he changes his mind and says he doesn't want to compensate me at all. I'm left frustrated because besides being rude, he did not at any time tell me he was unhappy with the work that I was doing. So my question is; Is the above a valid reason to back out of a verbal contract in your opinion?

    Read the article

  • Why it is called "hash table", or "hash function"? Hash doesn't make any sense to me here

    - by Saeed Neamati
    It's now about 4 years of development that I'm using, hearing, talking about, and implementing hash tables and hash functions. But I really never understand why it's called hash? I remember the first days I started programming, this term was kind'of cumbersome terminology to me. I never figured out what is it, based on its name. I just experimentally understood what it does and why and when should we use it. However, I still sometimes try to figure out why it's called hash. I have no problem with table or function and to be honest, they are pretty deductive, rational terms. However, I think better words could be used instead of hash, like key, or uniqueness. Don't key table or uniqueness table. According to my dictionary, hash means: Fried dish of potato and meats (highly irrelevant) # symbol (AKA number sign, pound sign, etc.) (still irrelevant, maybe just a mis-nomenclature) Apply algorithm to character string (still has nothing to do with uniqueness, which is the most important feature of a hash table) Cut food Another term for hashish Does anyone know why it's called hash?

    Read the article

  • Start frei für die Exadata Community im neuen Look!

    - by Frank Schneede (Exadata Community)
    Endlich ist es soweit! Pünktlich mit dem Start der DOAG Konferenz 2012, die vom 20.11. - 22.11.2012 in Nürnberg stattfindet, geht die Deutsche Exadata Community in völlig neu gestaltetem Outfit an den Start. Sie werden hier regelmäßig über neue Ankündigungen sowie Tipps und Tricks im Umgang mit Exadata informiert. Durch das freiere Blogformat werden an dieser Stelle auch Berichte über Exadata Projekte erscheinen, die besonders hervorhebenswert sind. Ich denke, Sie dürfen gespannt sein! Vieles hat sich seit dem letzten Update in der Community getan, denn auf der diesjährigen Oracle Open World in San Franzisco wurde eine ganze Reihe spannender Ankündigungen rund um Exadata gemacht. Die kürzlich vorgestellten Modelle Exadata Database Machine X3-2 und X3-8 sind in der grundlegenden Architektur zwar unverändert geblieben, jedoch sind die Modelle mit aktuellen Prozessoren in SandyBridge Mikroprozessorarchitektur noch leistungsfähiger als bisher. Der vierfach vergrößerte Flash Cache nimmt wesentlich mehr Daten auf und macht die Exadata so zur "In-Memory" Database Machine. Mit der neuen Exadata Software 11.2.3.2 kann der Flash Cache nun als persistenter Write Back Flash Cache verwendet werden. Durch das neuartige Caching profitieren auch OLTP Applikationen, die eine hohe Last von schreibenden Transaktionen verursachen, stärker von der Exadata Technologie. Ein neues Einstiegsmodell, das Exadata X3-2 Eighth Rack, vervollständigt die Produktfamilie und senkt abermals die Einstiegshürde für die Kunden.  Die beiden Community Tipps zur Exadata Hardware wurden aktualisiert. Lesen Sie alles über die Exadata Database Machine X3-2 und deren große Schwester, die Exadata Database Machine X3-8.

    Read the article

  • Hello PCI Council, are you listening?

    - by David Dorf
    Mention "PCI" to any retailer and you'll instantly see them take a deep breath and start looking for the nearest exit.  Nobody wants to be insecure, but few actually believe that PCI does anything more than focus blame directly on retailers.  I applaud PCI for making retailers more aware of the importance of security, but did you have to make them PAINFULLY aware?  POS vendors aren't immune to this pain either as we have to undergo lengthy third-party audits in addition to the internal secure programming programs.  There's got to be a better way. There's a timely article over at StorefrontBacktalk that discusses the inequity of PCI's rules, and also mentions that the PCI Council is accepting comments until April 15th. As a vendor, my biggest issue with PCI is that they require vendors to disclose the details of any breaches, in effect "ratting out" customers.  I don't think its a vendor's place to do this.  I'd rather have the trust of my customers so we can jointly solve the problem. Mary Ann Davidson, Oracle's Chief Security Officer, has an interesting blog posting on this very topic.  Its a bit of a long read, but I found it very entertaining and thought-provoking.  Here's an excerpt: ...heading up the list of “you must be joking” regulations are recent disturbing developments in the Payment Card Industry (PCI) world. I’d like to give [the] PCI kahunas the benefit of the doubt about their intentions, except that efforts by Oracle among others to make them aware of “unfortunate side effects of your requirements” – which is as tactful I can be for reasons that I believe will become obvious below - have gone, to-date, unanswered and more importantly, unchanged. I encourage you to read the entire posting, Pain Comes Instantly, and then provide feedback to the PCI Council.

    Read the article

  • Issues in pulse audio in Ubuntu 11.10

    - by Kamal
    Good Morning All. I am a new ubuntu user. So please forgive me if this question is too basic. I have installed Ubuntu 11.10 in my machine. I have logged in as USER_A. My external audio device is a Headset and I was able to hear the audio properly. I need to join my Ubuntu machine to a window's domain (my office server). I followed the steps explained in http://www.ghacks.net/2010/04/21/join-a-ubuntu-machine-to-a-windows-domain/ and was successful in joining my ubuntu machine to the windows domain. sudo apt-get install likewise-open5 sudo domainjoin-cli join DOMAIN USER_B Now when I logged in as USER_B, there is no audio for this user in the same machine. I crossed check with my User_A account. There is no issues with the sound for User_A. Only for User_B, there is no audio. When I checked the sound settings of User_B, there is no device listed in Hardware, Input and Output. Whereas for User A, my Headset is listed in Input and Output. Can anyone please help me on this. Why there is no sound for User_B? Thank you.

    Read the article

  • Overloading methods that do logically different things, does this break any major principles?

    - by siva.k
    This is something that's been bugging me for a bit now. In some cases you see code that is a series of overloads, but when you look at the actual implementation you realize they do logically different things. However writing them as overloads allows the caller to ignore this and get the same end result. But would it be more sound to name the methods more explicitly then to write them as overloads? public void LoadWords(string filePath) { var lines = File.ReadAllLines(filePath).ToList(); LoadWords(lines); } public void LoadWords(IEnumerable<string> words) { // loads words into a List<string> based on some filters } Would these methods better serve future developers to be named as LoadWordsFromFile() and LoadWordsFromEnumerable()? It seems unnecessary to me, but if that is better what programming principle would apply here? On the flip side it'd make it so you didn't need to read the signatures to see exactly how you can load the words, which as Uncle Bob says would be a double take. But in general is this type of overloading to be avoided then?

    Read the article

  • How to start and maintain an after-work project

    - by Sam
    I work as a full time developer. My workplace, however, is very limiting in the technologies and programming languages I can use. All of the work is done in C++. It is clear that C++ is rapidly losing (or maybe already lost) its leading position. (please don't flame me, I have years and years of C++ experience, and I love this language, I am merely stating a fact). I have a few ideas for java/android projects as well as a project I would like to implement in C#. I see this as a way for me to stay current with the job market's trends and I hope that it will help me find my next job in a more up to date area. So here's the problem, my normal workday is 10-11 hours, after finishing with the kids and house chores I get about 1-2.5 hours before I am too tired to think much less code. at that point I am going to bed frustrated, disappointed with myself for not being able to stick with my plans, and then I wake up the next morning to do it all again. I have a few hours more during the weekends but clearly I would need to do something different if I want to reach any of my goals. Is there any way for me to make better use of the time I have? Did any of you guys have a similar problem, and had succefully resolved it?

    Read the article

  • Compiling custom kernel 3.7.x lowlatency on Ubuntu 12.04

    - by FlabbergastedPickle
    All, I have a peculiar problem with trying to compile a lowlatency flavor of the latest 3.7 kernel. I retrieved the prepatched source from the launchpad using bzr, compiled it using the usual make-kpkg using the current config file plus default options for the rest, installed the kernel and booted into it. Everything works except for the fglrx and wl drivers that I had to install in the original 12.04 lowlatency kernel. So, I tried recompiling these and succeeded with both of them (no errors were reported)--wl driver required a minor adjustment to system.h include while latest fglrx 12.11 beta11 (released yesterday, Dec. 3rd, 2012) compiled without the hitch. Yet, when I try to modprobe either module (both having in common the fact that they were built after the kernel, fglrx as a deb, and wl via the usual make/make install), I get "FATAL: no MODULENAME module found" (MODULENAME being either wl or fglrx). The graphic driver watermark shows 3D crossed out and "for testing purposes" (or "unsupported hardware," can't remember), and no fglrx or wl is loaded. More mysteriously, dmesg shows no attempt on kernel's behalf to load the said drivers, even though they are clearly in the right /lib/modules/KERNEL_VERSION folder. How is this possible? Has something fundamentally changed in 3.7 kernel that would prevent modprobing of these? I know that there is driver signing option that was merged recently but as far as I could tell the kernel config file generated by the build process had that disabled. OTOH, while building wl driver, I did get a warning that the driver was not signed... Then again, even if the kernel disallowed loading of those modules, shouldn't dmesg reflect that? Any thoughts on this one are most appreciated.

    Read the article

  • Dual boot on Hp Envy Ultrabook

    - by phodu_insaan
    I just bought a HP Envy ultrabook 1002TX. It comes with a Win7 Home basic and a 32GB SSD + 500GB HDD. I started to install ubuntu and in doing so went and deleted all the partitions on my HDD and recreated them the way I wanted. Then when I tried to install ubuntu it didn't recognize my HDD. To solve this i typed dmraid -E -r /dev/sdX where the 'X' was my SSD drive. After this ubuntu can install but windows for some reason does not install. Also the Intel Caching feature is lost and SSD is just sitting and doing nothing. I want to know how to solve this problem. Ideeally I would like to use the SSD for caching, either in windows or ubuntu. How do I get the SSD back to working as an Intel rapid cache? How do I get windows to install properly? It tell me that windows is unable to configure itself to my hardware, and my PC came with windows pre-installed so this is not possible. Sorry for the long question and thanks for your answers! PS: At one time when I booted I pressed Ctrl+i and went to the intel rapid cache menu. I think i screwed up something in here, because only after this the rapid cache stopped working, and each time I booted the PC thought the BIOS was my primary disk.

    Read the article

  • Best Usage of Multiple Computers For a Developer

    - by whaley
    I have two Macbook Pros - both are comparable in hardware. One is a 17" and the other a 15". The 17" has a slightly swifter CPU clock speed, but beyond that the differences are completely negligible. I tried a setup a while back where I had the 17" hooked up to an external monitor in the middle of my desk with the 15" laptop immediately to the right of it, and was using teleport to control the 15" from my 17". All development, terminal usage, etc. etc. was being done on the 17" and the 15" was primarily used for email / IM / IRC... or anything secondary to what I was working on. I have a MobileMe account so preferences were synced, but otherwise I didn't really use anything else to keep the computers in sync (I use dropbox/git but probably not optimally). For reasons I can't put my finger on, this setup never felt quite right. A few things that irked me was the 15" was way under-utlized and the 17" was overutilized having 2 laptops and a 21" monitor all on one desk actually took up lots of desk space and it felt like I had too much to look at. I reverted back to just using the 17" and the external monitor and keeping the 15" around the house (and using it very sparingly). For those of you who are using multiple laptops (or just multiple machines for that matter), I'd like to see setups that work for you for when you have 2 or more machines that gives you optimal productivity and why. I'd like to give this one more shot but with a different approach than my previous - which was using the 15" as a machine for secondary things (communication, reading documentation, etc. etc).

    Read the article

  • CoffeeScript - inability to support progressive adoption

    - by Renso
    First if, what is CoffeeScript?Web definitionsCoffeeScript is a programming language that compiles statement-by-statement to JavaScript. The language adds syntactic sugar inspired by Ruby and Python to enhance JavaScript's brevity and readability, as well as adding more sophisticated features like array comprehension and pattern matching.The issue with CoffeeScript is that it eliminates any progressive adoption. It is a purist approach, kind of like the Amish, if you're not borne Amish, tough luck. So for folks with thousands of lines of JavaScript code will have a tough time to convert it to CoffeeScript. You can use the js2coffee API to convert the JavaScript file to CoffeeScript but in my experience that had trouble converting the files. It would convert the file to CoffeeScript without any complaints, but then when trying to generate the CoffeeScript file got errors with guess what: INDENTATION!Tried to convince the CoffeeScript community on github but got lots of push-back to progressive adoption with comments like "stupid", "crap", "child's comportment", "it's like Ruby, Python", "legacy code" etc. As a matter of interest one of the first comments were that the code needs to be re-designed before converted to CoffeeScript. Well I rest my case then :-)So far the community on github has been very reluctant to even consider introducing some way to define code-blocks, obviously curly braces is not an option as they use it for json object definitions. They also have no consideration for a progressive adoption where some, if not all, JavaScript syntax will be allowed which means all of us in the real world that have thousands of lines of JavaScript will have a real issue converting it over. Worst, I for one lack the confidence that tools like js2coffee will provide the correct indentation that will determine the flow of control in your code!!! Actually it is hard for me to find enough justification for using spaces or tabs to control the flow of code. It is no wonder that C#, C, C++, Java, all enterprise-scale frameworks still use curly braces. Have never seen an enterprise app built with Ruby or PhP.Let me know what your concerns are with CoffeeScript and how you dealt with large scale JavaScript conversions to CoffeeScript.

    Read the article

  • How to change careers

    - by Jack Black
    For the past 4 years I have worked in c# doing web development. I have really enjoyed it, learnt a lot and have a worked hard to get to a position where I am earning good money and enjoy the work. However lately - I have wanted a change. What with the "native renaissance" I would like to change my career from being high level application and web development to more down to the metal native development. I haven't done any c or c++ since Uni over 4 years ago and so I have begun reading text books and websites to brush up. However - one major issue I have is that I have no practical experience with C++ and although I am brushing up on it, there will be a lot I don't know. Most of the jobs I have seen in native code around me all require native experience. The only positions I can find that don't explicitly ask for native experience are junior level positions. In my current role I am a mid level developer and although there would be a lot to learn in a c++ position, I wouldn't class myself as a junior. I guess my question is, how do people solve this issue when changing programming languages for their profession and / or how would you approach this hurdle? Like I said, I would really like to try out native development professionally but I wouldn't want to move back to a junior role. Would employers consider years of managed development and native hobby projects enough experience?

    Read the article

  • Sound card not detected in 13.04

    - by Ganessh Kumar R P
    I have a problem with my sound card. I don't have volume up or down option anywhere. In the setting -> Sound I don't have any card detected. But when I run the command sudo aplay -l, I get the following output **** List of PLAYBACK Hardware Devices **** Failed to create secure directory (/home/ganessh/.config/pulse): Permission denied card 0: MID [HDA Intel MID], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 And the command lspci -v | grep -A7 -i "audio" outputs 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at f0f20000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode]) -- 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d3efc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 07:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 So, I assume that the drivers are properly installed but still I don't get any option in the settings or volume control. The same card used to work well back in 2010 versions(04 and 10) Any help is appreciated. Thanks

    Read the article

< Previous Page | 578 579 580 581 582 583 584 585 586 587 588 589  | Next Page >