Search Results

Search found 32538 results on 1302 pages for 'database restore'.

Page 584/1302 | < Previous Page | 580 581 582 583 584 585 586 587 588 589 590 591  | Next Page >

  • automating sql express backup via VSS backup

    - by Ornus
    I need to set up on my server automated daily SQL db backups (sql express, so no maintenance plans). To keep things simple I'm gonna use a backup solution (JungleDisk) that uses VSS to back up the DB file. SQL fully supports VSS and on requests freezes DB I/O, so I understand I'm taking snapshots. JungleDisk supports doing differential back up and compression, so it simplifies things and keeps the cost/bandwidth down. Is it enough to just backup up db file (mdf). Do I need to back up transaction log (ldf) file as well? I'm ok with losing a day's worth of work (since the last backup). if I go this route, what's the best way to restore the database? are there any issues with this approach I'm not aware of?

    Read the article

  • p7h55-m/usb3 blue screen ?

    - by winterwindz
    hi im not sure if this is the right place to ask but, i just build a new desktop for gaming. i3 530 2.93 GHz P7H55-M/USB3 Corsair Vengeance 4GB 1600MHz iGame Gtx 460 Win 7 32bit Huntkey X7 900W Everytime i start the computer it would run normally until the windows loading and will just stuck and hit the blue screen.i tried everypossible way to repair,restore the windows but nutin seems to be working. I'm not sure if its compatibility problem or Bios or even Ram,since the beep is a normal beep and will only blue screen when loading the windows. if anyone can help me id appriciate it. thx

    Read the article

  • Prevent Windows 7 from installing a "critical" updates that crashes the system

    - by Sylverdrag
    I am running Windows 7 home premium. Up until yesterday, everything was going just beautifully, until I received a "critical update". As soon as the critical update was installed, the system became extremely unstable and froze up every few minutes requiring me to restart the system several times, with the same results. I used system restore to roll back the * update, and everything went back to normal... except that I keep getting a message telling me to restart the computer so that it can install this "critical update". There is no "don't install that crap on my machine" option. Disabling the updates doesn't change anything, turning off the windows update service doesn't change anything either, and being on Home premium, I have no access to the group policies. Any ideas of what can be done to prevent Windows from installing this update the next time I reboot?

    Read the article

  • Prevent chrome from auto-hiding bookmark bar on google search

    - by Jeromy Anglim
    I am using Chrome 28.0.1500.20 beta on OSX 10.7. In this version, when you perform a google search using the address bar the bookmarks bar disappears. Toggling "always show bookmarks bar" does not restore the bookmark (see screenshot below). I want to always show the bookmark bar. In particular, I often use a bookmarklet that converts a current google search into a Google Scholar search. Is there a way to always show the bookmark bar even when performing a Google search in Chrome?

    Read the article

  • Missing HDD space - says 65GB used, selecting all folders shows 40GB used

    - by Igor K
    Hi Running Windows Server 2008, 74GB raptor drive and noticed we only had about 500MB left - yikes! So deleted some old backups we don't need, but can't track down where about 25GB seems to be taken up. If I go to C: and select all folders and go to properties, this comes to around 40GB but in My Computer I can see 65GB is used. How can I find out whats eating the space? Just IIS + MSSQL Express + Smartermail on the server EDIT Checked to show hidden folders plus protected operating system files - 41.8GB usage, so 24.6GB is missing somewhere. Theres no system restore even installed on the server

    Read the article

  • Windows Server 2008 R2 backup includes volume with MSSQL data

    - by J F
    I'm using wbadmin to schedule image backup every night on a Windows Server 2008 R2 Standard server. Ever since installing MS-SQL 2008 Express R2, wbadmin wants to also backup the volume where the MS-SQL data files are located (L:). I'm using -allCritical to make sure bare metal restore will work. command-line: wbadmin start backup -backupTarget:\\myserver\backup$\myserver\%DATE% -include:C: -allCritical -quiet I don't want to do this, because I'm backing up MS-SQL manually elsewhere. It worked just fine only taking C: before I installed MS-SQL.

    Read the article

  • Upgrading Active Directory from 2000 to 2008

    - by Doug
    Our config is currently: 1 Windows 2000 domain controller running ISA2000, dhcp, dns 1 Windows 2003 domain controller as main file server, prob cert server as well, dhcp, dns 1 Windows 2008/Exchange2010 domain controller as Exchange server, DHCP,DNS Currently getting FRS errors on files server journalwrap error Currently getting FRS errors on othe DC's can't replicate from above Exchange DC holds Schema, rid,pdc, and infastructure roles File Server holds Domain namaing operation master role WOW, I didn't set this up, just inherited it. Am I right to assume that fixing the FRS errors is #1, what do I need to do for that? set enable journalwrap auto restore in registry? Demote W2000 domain controller, should that have any implications for ISA? We have Forefront to be deployed but that's another day Transfer Domain Nameing Role to Exchange server (I know or think having an Exchange server as DC isn't best practive) We will be getting another server W2008 to replace current file server and I thought it could takeover all roles once deployed Demote W2k3 file server and then raise functional domain level to 2008 Am I missing anything other that the sense to walk away? Thanks

    Read the article

  • Backup broken PostgreSQL 8.4 without pg_dump

    - by Daniil
    So. I have a problem. PostgreSQL 8.4 won't start or restart without any output given. But it worked for 3 monthes until hosting provider doesn't rebooted server. Now it is completly broken. It wan't start and doesn't give any output or log. pg_dump: [archiver (db)] connection to database "postgres" failed: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"? Now I want to backup (or just start pgsql socket) my database to reinstall postgesql. How?

    Read the article

  • Import Google Voice Contacts Into iPhone

    - by Nalandial
    What I'd like to do is have my Google Voice contacts available on my iPhone, not the other way around. I recently had to restore the phone to factory defaults and it's a pain to manually enter all them all. When I make a new GMail e-mail account on my iPhone it won't let me import contacts from my Google account, but even if it did I don't want every single contact in my phone. Google for some reason adds every single person I've ever sent e-mails to into my contacts list, which as you can imagine is quite a large list by now. Does anyone have any suggestions for how to do this?

    Read the article

  • Problems executing check_mysql plugin

    - by Brian
    I'm attempting to test out the check_mysql plugin for Nagios using the command line. It works great when I'm just checking localhost but when I try to specify a different server (using the -H argument) I keep getting the following error message: CRITICAL - Unable to connect to mysql://nagios_user@{remoteServerHostname}/ - Access denied for user 'nagios_user'@'{localServerHostName}' (using password: YES) It looks like it's trying to connect to the database using the localhost server even though I've specified a different host name. I've already set up this user on the remote database and they have correct permissions. I'm just trying to figure out why the script keeps inserting the localhost server name instead of the remote one.

    Read the article

  • SQL server 2000 reporting bad values to ASP.Net Application

    - by Ben
    I have an instance of SQL server 2000 (8.0.2039) with a rather simple table. We recently had users complain about an application I wrote returning bad values for some of the dates in the databse. When I query the table directly via Server Management Studio, it will return the correct values, however the identical queries from my application report the wrong values, but only for a couple of dates. I have been over the code, and it is solid. If the error was in the code, all of the dates reported should be wrong. I have also run the code on an identical test database, and everything is reported properly. I believe the problem may lie in the sql instance itself, which is why I am posting in Server Fault. My question is, has anyone heard of a database reporting bad (incorrect) date values when queried via web application? It should be noted that this particular server was once manually rebuilt after having a cluster clean run on it.

    Read the article

  • Windows won't ctrl+c and ctrl+v

    - by Thomasstuck
    Using Ctrl+C and V I am unable to copy or paste anything. I have tried many different applications and still no luck. I am able to copy/paste via the shortcut menu when you right click the mouse. Ctrl+F works which means the Ctrl button is functional. I've tried restoring to an earlier restore point. I also ran SFC /SCANNOW (System File Checker) which did not find any errors. Ctrl+C and then right click and paste doesn't work either. I have tried with external and internal keyboard and still no luck. I've clicked on all the relevant search results from Google but none of them work for me. Does anyone know what may be causing this issue and how I can correct it? This problem comes and goes at random times.

    Read the article

  • What are some good, IP Address Management solutions for IPv6? [closed]

    - by Russell Heilling
    There are a number of open source IPAM tools available for IPv4 address management; however there seems to be a distinct lack of actively updated tools available for IPv6. Other than FreeIPdb (code no longer maintained) or the RIPE Database (I have seen some customisations to the RIPEdb that allow for enterprise/ISP IPAM but it seems like overkill for a system that will probably only ever handle one /32 worth of space). Are there any other options that I'm missing? (Database only please. I know vi can be used for flat text IPAM, that's how I'm handling our /32 at the moment, but I don't see it scaling for much longer) It doesn't have to be open source but what are folks doing to manage IPv6 in a dual stack environment

    Read the article

  • Time difference between servers after disaster recovery

    - by Sandokan
    We are running an old training system based on Windows Server 2003 and XP-clients. The solution is rather simple with four servers, two of them beeing DC:s. Everything is preconfigured and that goes for backup scheme as well. The backup software is Symantec BackupExec 2010. The scheme is a standard GF-F-S routine with full backups running once a week on Sundays. The other six days run differential backups. Now let's say in a worst case scenario, a server crashes on Saturday and we have to restore it from backup. The last backup will then be six days old and thus it will come online with six days old configurations. Will this pose a problem for the other servers or will the recovered server "get in line" eventually?

    Read the article

  • Making fdisk see software RAID 0

    - by unknownthreat
    I am following http://grub.enbug.org/Grub2LiveCdInstallGuide and I am using software RAID 0. I am using Ubuntu 10.10 LiveCD and is trying to restore grub2 after installing Windows 7 in another partition. Here is the console's outputs: ubuntu@ubuntu:~$ sudo fdisk -l Unable to seek on /dev/sad ubuntu@ubuntu:~$ sudo dmraid -r /dev/sdb: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 /dev/sda: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 So do you have an idea for how to make fdisk see my RAID array? How to make fdisk detect the Software RAID like dmraid?

    Read the article

  • PostgreSQL RAID configuration

    - by Yoldar-Zi
    I'm stuck how best to configure disk array. We have Hp P2000 G3 disk array with 24 SAS physical disks 300Gb each. We need to configure this array got 2 copies of PostgreSQL 9.2 because two different system. As we know it's recommended to store database and transaction logs(pg_xlog) files on separate disks. So we must setup 4 logical disk: 2 for transaction logs with RAID 1 2 for database with RAID 10 Is this right scheme of distribution? Or may be it is best to just make one big RAID 10 with 4 logical disks?

    Read the article

  • Disable "Tip for your Google Chrome"

    - by njallam
    Avast has added something to their software which Google Chrome tip whenever it informs you of an database update: It seems to only be the same message at the moment, as I am only getting the Search with Google right from the address bar to save time. Try Now: How can I stop it from giving me this tip and only show me the virus definitions have been updated message? Your virus definitions have been automatically updated I have tried looking under Settings > Popups, however I cannot find an option to disable it there. I tried these settings that is in my answer In the avast! settings interface there is an option to turn off recommendations and tips: Settings Community Edit: It doesn't seem to work anymore, it worked for the next 2 database updates and now it is showing the tip again.

    Read the article

  • Creepy MySQL error during hard work

    - by Kiewic
    Hi, I have a MySQL database installed on a OpenSuse 11.1 server (it is a Bitnami image). The database works fine, it can stay many days without any error, but when MySQL receives a huge amount of transactions, it dies immediately. The next screen shows the error: Moreover, I don't know how to restart MySQL. I have tried this: /opt/bitnami/mysql/bin/mysqld start But it doesn't work, that gives me the next output: 110209 17:09:01 [ERROR] Fatal error: Please read "Security" section of the manual to find out how to run mysqld as root! 110209 17:09:01 [ERROR] Aborting 110209 17:09:01 [Note] /opt/bitnami/mysql/bin/mysqld.bin: Shutdown complete It doesn't matter which kind of statements are executing, if they are a huge amount, MySQL dies. The MySQL server version is 5.1.30 What can be causing these sudden failures?

    Read the article

  • Missing disk space in Windows XP

    - by Jørn Schou-Rode
    On my mother's Lenovo laptop, Windows XP claims that the hard drive is almost full. According to the properties window, 52.7 out of 55.2 GB is in use: By deleting temp files from Internet Explorer, System Restore, Recycle bin, Windows Update, System Cleanup, I managed to free up about one GB. That's still 50 GB in use, which still is a lot more than I expected. Hence, I gave good old WinDirStat a spin, and here's the output: It might be hard to read here, but the first line says that the total amount of disk space in use on drive C is 24.3 GB. So Windows claims usage of 52.7 GB and WinDirStat can only account for 24.3 GB. Where is the other half of that disk space being used? I hope someone has an answer, or some tricks or tips to do further research. UPDATE: The laptop in question has an SSD hard drive. I am aware that these disk (at least the earlier ones) have a limited life-time. Could the symptoms described be caused by wear and tear on the SSD?

    Read the article

  • MS Paint: how to enter proper text?

    - by Peter Mortensen
    How do I enter normal text in Microsoft Paint? Normally I don't have any problems adding text to an image in Paint. But I ran into this problem: The text is supposed to be "abcdefd" (entered in a text editor and pasted). The same characters appear if typed directly. So apparently it is using some other character set. How do I restore normal operation? Platform: MS Paint 5.2, Windows XP Professional x64 SP2, 8 GB RAM.

    Read the article

  • Deleted one membership table. Possible to import without breaking relationship?

    - by superexsl
    Hey, I hope this isn't going to be tricky/time consuming, so fingers crossed. I'm working with the ASP.NET membership table. However, I've got quite a few other tables that I've built, and most of them have a relationship with the dbo.aspnet_Membership table. I've accidentally deleted the dbo.aspnet_Membership table and can't get it back. There was no major data on it, (as it's on my local machine), but I would really like to copy and paste that one table from another database I have, mainly for the sake of not breaking the schema. Is this possible? I'm worried if I run the Aspnet_regsql.exe tool, it's going to break the schema and remove all data from the tables as well the relationships (which would take a while to re-establish). Is there any way I can import just the dbo.aspnet_Membership table into my current database? Thanks for the any advice!

    Read the article

  • uninstall mysql on linux with plesk

    - by Arsenal
    I'm having trouble uninstalling linux on my centOS 4 that has plesk. I'm actually trying to upgrade my Mysql 4.1 version to Mysql 5.0 using the following command: yum update mysql I get an error list of conflicted files however. When I try to remove mysql 4.1 and perform a clean install but when I use yum remove mysql* It deletes all of its dependencies and appearantly some of these are files needed by plesk, which causes my plesk to stop working. A did a full restore and everything is okay now, but how can I remove mysql without ruining plesk? I have also tried: rpm -qa | grep mysql to get a list of all files and remove them one by one, but there's a duplicate in that list, so I can't delete those (because it says it doesn't know which one to take). Any help would be greatly appreciated!

    Read the article

  • What's causing "shutdown state" after TFTP reloaded Cisco `running-config` on 871?

    - by xtian
    Cisco CCP Write Configuration borked my 871w config while I was trying to setup port forwarding. I tested the 871's flash memory with fsck and rewrote the minimal config for TFTP (which is the same for Cisco's CCP app.). Thne, I successfully uploaded a previously working running-config from Win Vista using SolarWinds TFTP Server, unfortunately the restore was not entirely successful. The old running config was saved to the 871's startup-config and I can login using console port. Some other things that are working are the hostname and welcome message but that's about it. Startup shows an error SETUP: new interface NVI0 placed in "shutdown" state after tftp. The missing light on the access point modem for ethernet link show the 871'a outside FE4 is not working. SO...what's the possible problem with reloading a previously working config (approximately 4 months with the same config) via TFTP? Is there something I can look for on the 871 to verify the config?

    Read the article

  • Distortion in format of data in wordpad file when shifted from windows XP to winows 2007

    - by Harpreet
    I have many data files which were set to open in wordpad file in windows XP. Those files have a particular format for data, like following: Name of Data file No. of data columns Name of data in column_1 Name of data in column_2 . . . Name of data in column_n column_1 column_2 column_3 ... column_n Now my computer has been formatted and OS is changed to windows 2007, however when I open my data files in wordpad the above format of data is no more present. The format in wordpad in windows 2007 seems to be distorted. Does anyone knows what to do to restore the format as shown above, which is what the data used to look like in XP? I have attached the snap shot of the new distorted format of data as seen in wordpad in windows 2007. The snap shot shows 100 column names, however the data columns present are only 5 when it should be actually 100 data columns.

    Read the article

  • KB2667402 update fails to install with 0x80004005. Yet it's also showing as installed

    - by growse
    I've got 15 Windows 2008 R2 x64 servers that I manage with SCCM2012. I've noticed during my Windows updates reporting that there's two boxes that are showing as 'error' for total updates installed. Digging around, it looks like the update that is failing to install is KB2667402. The Software Centre on the server itself shows the following: The software change returned error code 0x80004005(-2147467259). So SCCM thinks it hasn't installed the update. However, if I go to the Programs and Features application and select 'Windows Updates', I can see an entry for KB2667402: If I try and uninstall this, I get an error: An error occurred. Not all of the updates were successfully uninstalled If I try and download the patch from Microsoft directly, I get the same error installing as displayed in Software Centre. The only odd thing about this setup that I can think would affect this is that I run the RDP service on a non-standard port. However, I do this across all the servers, so it seems odd that it would fail on just 2 out of 15. The tail of the WindowsUpdate.log file is below: 2012-06-26 15:33:53:184 3924 1608 COMAPI ------------- 2012-06-26 15:33:53:190 3924 1608 COMAPI -- START -- COMAPI: Install [ClientId = CcmExec] 2012-06-26 15:33:53:190 3924 1608 COMAPI --------- 2012-06-26 15:33:53:190 3924 1608 COMAPI - Allow source prompts: No; Forced: No; Force quiet: Yes 2012-06-26 15:33:53:190 3924 1608 COMAPI - Updates in request: 1 2012-06-26 15:33:53:190 3924 1608 COMAPI - ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed 2012-06-26 15:33:53:199 860 1198 Agent ************* 2012-06-26 15:33:53:199 860 1198 Agent ** START ** Agent: Installing updates [CallerId = CcmExec] 2012-06-26 15:33:53:199 860 1198 Agent ********* 2012-06-26 15:33:53:199 860 1198 Agent * Updates to install = 1 2012-06-26 15:33:53:201 860 1198 Agent * Title = Security Update for Windows Server 2008 R2 x64 Edition (KB2667402) 2012-06-26 15:33:53:201 860 1198 Agent * UpdateId = {48859BE4-1331-4CD2-8E70-3B537180A0D0}.103 2012-06-26 15:33:53:201 860 1198 Agent * Bundles 1 updates: 2012-06-26 15:33:53:201 860 1198 Agent * {D854ECF1-99A7-4D67-B435-2D041BF79565}.103 2012-06-26 15:33:53:204 3924 1608 COMAPI - Updates to install = 1 2012-06-26 15:33:53:204 3924 1608 COMAPI <<-- SUBMITTED -- COMAPI: Install [ClientId = CcmExec] 2012-06-26 15:33:53:221 860 1198 Agent WARNING: failed to calculate prior restore point time with error 0x80070002; setting restore point 2012-06-26 15:33:53:222 860 1198 Agent WARNING: LoadLibrary failed for srclient.dll with hr:8007007e 2012-06-26 15:33:53:322 860 1198 DnldMgr Preparing update for install, updateId = {D854ECF1-99A7-4D67-B435-2D041BF79565}.103. 2012-06-26 15:33:53:325 5700 117c Misc =========== Logging initialized (build: 7.5.7601.17514, tz: +0100) =========== 2012-06-26 15:33:53:325 5700 117c Misc = Process: C:\Windows\system32\wuauclt.exe 2012-06-26 15:33:53:325 5700 117c Misc = Module: C:\Windows\system32\wuaueng.dll 2012-06-26 15:33:53:324 5700 117c Handler ::::::::::::: 2012-06-26 15:33:53:325 5700 117c Handler :: START :: Handler: CBS Install 2012-06-26 15:33:53:325 5700 117c Handler ::::::::: 2012-06-26 15:33:53:330 5700 117c Handler Starting install of CBS update D854ECF1-99A7-4D67-B435-2D041BF79565 2012-06-26 15:33:53:342 5700 117c Handler CBS package identity: Package_for_KB2667402~31bf3856ad364e35~amd64~~6.1.2.0 2012-06-26 15:33:53:366 5700 117c Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\44059e0415033d6f699a50ef69dd5ff2\windows6.1-kb2667402-v2-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\44059e0415033d6f699a50ef69dd5ff2\inst 2012-06-26 15:33:56:270 5700 3b8 Handler FATAL: CBS called Error with 0x80004005, 2012-06-26 15:33:56:402 5700 117c Handler FATAL: Completed install of CBS update with type=0, requiresReboot=0, installerError=1, hr=0x80004005 2012-06-26 15:33:56:405 5700 117c Handler ::::::::: 2012-06-26 15:33:56:406 5700 117c Handler :: END :: Handler: CBS Install 2012-06-26 15:33:56:406 5700 117c Handler ::::::::::::: 2012-06-26 15:33:56:433 860 1198 Agent ********* 2012-06-26 15:33:56:433 860 1198 Agent ** END ** Agent: Installing updates [CallerId = CcmExec] 2012-06-26 15:33:56:433 860 1198 Agent ************* 2012-06-26 15:33:56:433 860 d14 AU Can not perform non-interactive scan if AU is interactive-only 2012-06-26 15:33:56:450 3924 e40 COMAPI >>-- RESUMED -- COMAPI: Install [ClientId = CcmExec] 2012-06-26 15:33:56:450 3924 e40 COMAPI - Install call complete (succeeded = 0, succeeded with errors = 0, failed = 1, unaccounted = 0) 2012-06-26 15:33:56:450 3924 e40 COMAPI - Reboot required = No 2012-06-26 15:33:56:450 3924 e40 COMAPI - WARNING: Exit code = 0x00000000; Call error code = 0x80240022 2012-06-26 15:33:56:451 3924 e40 COMAPI --------- 2012-06-26 15:33:56:451 3924 e40 COMAPI -- END -- COMAPI: Install [ClientId = CcmExec] 2012-06-26 15:33:56:451 3924 e40 COMAPI ------------- 2012-06-26 15:33:56:536 860 13a4 AU Triggering Offline detection (non-interactive) 2012-06-26 15:33:56:536 860 d14 AU ############# 2012-06-26 15:33:56:536 860 d14 AU ## START ## AU: Search for updates 2012-06-26 15:33:56:536 860 d14 AU ######### 2012-06-26 15:33:56:539 860 d14 AU <<## SUBMITTED ## AU: Search for updates [CallId = {2DBB046C-2265-421B-A37B-93BDECC6C261}] 2012-06-26 15:33:56:539 860 1788 Agent ************* 2012-06-26 15:33:56:539 860 1788 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates] 2012-06-26 15:33:56:539 860 1788 Agent ********* 2012-06-26 15:33:56:539 860 1788 Agent * Online = No; Ignore download priority = No 2012-06-26 15:33:56:539 860 1788 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1" 2012-06-26 15:33:56:539 860 1788 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed 2012-06-26 15:33:56:539 860 1788 Agent * Search Scope = {Machine} 2012-06-26 15:33:58:562 860 1788 Agent * Found 0 updates and 70 categories in search; evaluated appl. rules of 180 out of 1072 deployed entities 2012-06-26 15:33:58:565 860 1788 Agent ********* 2012-06-26 15:33:58:565 860 1788 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates] 2012-06-26 15:33:58:565 860 1788 Agent ************* 2012-06-26 15:33:58:650 860 f2c AU >>## RESUMED ## AU: Search for updates [CallId = {2DBB046C-2265-421B-A37B-93BDECC6C261}] 2012-06-26 15:33:58:650 860 f2c AU # 0 updates detected 2012-06-26 15:33:58:650 860 f2c AU ######### 2012-06-26 15:33:58:650 860 f2c AU ## END ## AU: Search for updates [CallId = {2DBB046C-2265-421B-A37B-93BDECC6C261}] 2012-06-26 15:33:58:650 860 f2c AU ############# 2012-06-26 15:33:58:650 860 f2c AU Featured notifications is disabled. 2012-06-26 15:33:58:651 860 f2c AU Successfully wrote event for AU health state:0 2012-06-26 15:33:58:652 860 f2c AU Successfully wrote event for AU health state:0

    Read the article

< Previous Page | 580 581 582 583 584 585 586 587 588 589 590 591  | Next Page >