Search Results

Search found 15661 results on 627 pages for 'protected mode'.

Page 585/627 | < Previous Page | 581 582 583 584 585 586 587 588 589 590 591 592  | Next Page >

  • onDraw() triggered but results don't show

    - by Don
    I have the following routine in a subclass of view: It calculates an array of points that make up a line, then erases the previous lines, then draws the new lines (impact refers to the width in pixels drawn with multiple lines). The line is your basic bell curve, squeezed or stretched by variance and x-factor. Unfortunately, nothing shows on the screen. A previous version with drawPoint() and no array worked, and I've verified the array contents are being loaded correctly, and I can see that my onDraw() is being triggered. Any ideas why it might not be drawn? Thanks in advance! protected void drawNewLine( int maxx, int maxy, Canvas canvas, int impact, double variance, double xFactor, int color) { // impact = 2 to 8; xFactor between 4 and 20; variance between 0.2 and 5 double x = 0; double y = 0; int cx = maxx / 2; int cy = maxy / 2; int mu = cx; int index = 0; points[maxx<<1][1] = points[maxx<<1][0]; for (x = 0; x < maxx; x++) { points[index][1] = points[index][0]; points[index][0] = (float) x; Log.i(DEBUG_TAG, "x: " + x); index++; double root = 1.0 / (Math.sqrt(2 * Math.PI * variance)); double exponent = -1.0 * (Math.pow(((x - mu)/maxx*xFactor), 2) / (2 * variance)); double ePow = Math.exp(exponent); y = Math.round(cy * root * ePow); points[index][1] = points[index][0]; points[index][0] = (float) (maxy - y - OFFSET); index++; } points[maxx<<1][0] = (float) impact; for (int line = 0; line < points[maxx<<1][1]; line++) { for (int pt = 0; pt < (maxx<<1); pt++) { pointsToPaint[pt] = points[pt][1]; } for (int skip = 1; skip < (maxx<<1); skip = skip + 2) pointsToPaint[skip] = pointsToPaint[skip] + line; myLinePaint.setColor(Color.BLACK); canvas.drawLines(pointsToPaint, bLinePaint); // draw over old lines w/blk } for (int line = 0; line < points[maxx<<1][0]; line++) { for (int pt = 0; pt < maxx<<1; pt++) { pointsToPaint[pt] = points[pt][0]; } for (int skip = 1; skip < maxx<<1; skip = skip + 2) pointsToPaint[skip] = pointsToPaint[skip] + line; myLinePaint.setColor(color); canvas.drawLines(pointsToPaint, myLinePaint); / new color } } update: Replaced the drawLines() with drawPoint() in loop, still no joy for (int p = 0; p<pointsToPaint.length; p = p + 2) { Log.i(DEBUG_TAG, "x " + pointsToPaint[p] + " y " + pointsToPaint[p+1]); canvas.drawPoint(pointsToPaint[p], pointsToPaint[p+1], myLinePaint); } /// canvas.drawLines(pointsToPaint, myLinePaint);

    Read the article

  • Windows opaque UserControl not refreshing any graphical changes made on it

    - by Debajyoti Das
    I have created a Windows UserControl. It actually paints a Grid (i.e. vertical and horizontal lines) using Graphics. User can change each cell height and width, and according to that Grid is refreshed. Overriding the OnPaint event I have created the grid. I used SetStyle(ControlStyles.Opaque, true) to make it transparent. I used this control on a form and from there I change the values of the cell height and width but due to Opaque the new grid is overlapping on the previous one and making it clumsy. How do I resolve this? UserControl Code: public partial class Grid : UserControl { public Grid() { InitializeComponent(); SetStyle(ControlStyles.Opaque, true); } private float _CellWidth = 10, _CellHeight = 10; private Color _GridColor = Color.Black; public float CellWidth { get { return this._CellWidth; } set { this._CellWidth = value; } } public float CellHeight { get { return this._CellHeight; } set { this._CellHeight = value; } } public Color GridColor { get { return this._GridColor; } set { this._GridColor = value; } } protected override void OnPaint(PaintEventArgs e) { base.OnPaint(e); Graphics g; float iHeight = this.Height; float iWidth = this.Width; g = e.Graphics; Pen myPen = new Pen(GridColor); myPen.Width = 1; if (this.CellWidth > 0 && this.CellHeight > 0) { for (float X = 0; X <= iWidth; X += this.CellWidth) { g.DrawLine(myPen, X, 0, X, iHeight); } for (float Y = 0; Y <= iHeight; Y += this.CellHeight) { g.DrawLine(myPen, 0, Y, iWidth, Y); } } } public override void Refresh() { base.ResumeLayout(true); base.Refresh(); ResumeLayout(true); } } Form Code: public partial class Form1 : Form { public Form1() { InitializeComponent(); } private void Form1_Load(object sender, EventArgs e) { } private void btnBrowse_Click(object sender, EventArgs e) { try { if (ofdImage.ShowDialog() == System.Windows.Forms.DialogResult.OK) { pbImage.Image = Image.FromFile(ofdImage.FileName); } } catch (Exception ex) { MessageBox.Show(ex.Message); } } private void btnShowGrid_Click(object sender, EventArgs e) { if (grid1.Visible) { grid1.Visible = false; btnShowGrid.Text = "Show"; } else { grid1.Visible = true; btnShowGrid.Text = "Hide"; } } private void btnGridCellMaximize_Click(object sender, EventArgs e) { grid1.CellHeight += 1; grid1.CellWidth += 1; grid1.Refresh(); } private void btnGridCellMinimize_Click(object sender, EventArgs e) { grid1.CellHeight -= 1; grid1.CellWidth -= 1; grid1.Refresh(); } }

    Read the article

  • Java -Android. Parser problem

    - by Kano
    I am making a very simple app with an RSS reader. The reader works great, but it's only giving me the title, and i want the description too. I'am very new to android, and I have tried a lot of things, but I can't get it to work. I've found a lot of parsers but they are to complicated for me to understand, so I was hoping to find a simple solution, since it's only title and description i want. Can anyone help me? import java.io.IOException; import java.net.MalformedURLException; import java.net.URL; import javax.xml.parsers.ParserConfigurationException; import javax.xml.parsers.SAXParser; import javax.xml.parsers.SAXParserFactory; import org.xml.sax.Attributes; import org.xml.sax.InputSource; import org.xml.sax.SAXException; import org.xml.sax.XMLReader; import org.xml.sax.helpers.DefaultHandler; import android.app.Activity; import android.os.Bundle; import android.widget.TextView; public class NyhedActivity extends Activity { String streamTitle = ""; @Override protected void onCreate(Bundle savedInstanceState) { // TODO Auto-generated method stub super.onCreate(savedInstanceState); setContentView(R.layout.nyheder); TextView result = (TextView)findViewById(R.id.result); try { URL rssUrl = new URL("http://tv2sport.dk/rss/*/*/*/248/*/*"); SAXParserFactory mySAXParserFactory = SAXParserFactory.newInstance(); SAXParser mySAXParser = mySAXParserFactory.newSAXParser(); XMLReader myXMLReader = mySAXParser.getXMLReader(); RSSHandler myRSSHandler = new RSSHandler(); myXMLReader.setContentHandler(myRSSHandler); InputSource myInputSource = new InputSource(rssUrl.openStream()); myXMLReader.parse(myInputSource); result.setText(streamTitle); } catch (MalformedURLException e) { // TODO Auto-generated catch block e.printStackTrace(); result.setText("Cannot connect RSS!"); } catch (ParserConfigurationException e) { // TODO Auto-generated catch block e.printStackTrace(); result.setText("Cannot connect RSS!"); } catch (SAXException e) { // TODO Auto-generated catch block e.printStackTrace(); result.setText("Cannot connect RSS!"); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); result.setText("Cannot connect RSS!"); } } private class RSSHandler extends DefaultHandler { final int stateUnknown = 0; final int stateTitle = 1; int state = stateUnknown; int numberOfTitle = 0; String strTitle = ""; String strElement = ""; @Override public void startDocument() throws SAXException { // TODO Auto-generated method stub strTitle = "Nyheder fra "; } @Override public void endDocument() throws SAXException { // TODO Auto-generated method stub strTitle += ""; streamTitle = "" + strTitle; } @Override public void startElement(String uri, String localName, String qName, Attributes attributes) throws SAXException { // TODO Auto-generated method stub if (localName.equalsIgnoreCase("title")) { state = stateTitle; strElement = ""; numberOfTitle++; } else { state = stateUnknown; } } @Override public void endElement(String uri, String localName, String qName) throws SAXException { // TODO Auto-generated method stub if (localName.equalsIgnoreCase("title")) { strTitle += strElement + "\n"+"\n"; } state = stateUnknown; } @Override public void characters(char[] ch, int start, int length) throws SAXException { // TODO Auto-generated method stub String strCharacters = new String(ch, start, length); if (state == stateTitle) { strElement += strCharacters; } } } }

    Read the article

  • Looking for suggestions on how to reuse AlertDialogs to confirm actions of contextual menus on the items of an ActivityList

    - by Ozone
    I use a ListActivity to display a list of items. The user can long-press an item in the list to display a contextual menu. This menu contains among other things an option to delete the long-pressed item. When the user selects this option, a dialog pops up asking for confirmation of the deletion. Upon confirmation, the item is deleted from the list. I would like to reuse the AlertDialog as much as possible. My attempts at using onPrepareDialog(int, View, Bundle) have been defeated by the fact that the Bundle is not passed to the DialogInterface.OnClickListener. I end up having to recreate a listener on every invocation. I see several ways to solve this: recreate the dialog on every occasion (pros: simple, cons: wasteful) keep the DialogInterface.OnClickListener in a field on the ListActivity and keep the item to be deleted as a field of the listener. (pros: no memory waste, cons: need to manage state). Q: is this safe? have onPrepareDialog update the title, and bind new View.OnClickListeners on the buttons of the AlertDialog. (pros: limit waste, cons: new View.OnClickListener on every invocation). If DialogInterface.OnClickListener accepted a Bundle, I wouldn't have to jump through hoops to keep track of the item being deleted. This is not a blocker, but I would love to see an elegant solution. I would love to hear your suggestions :) Here is the code for option #1, if you want to play with this: public class Example extends ListActivity { private static final int CONFIRM_DELETE_DIALOG = 1; private static final String POSITION_KEY = "position"; private ArrayAdapter<String> mAdapter; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); mAdapter = new ArrayAdapter<String>( this, android.R.layout.simple_list_item_1, new String[] { "one", "two" }); setListAdapter(mAdapter); registerForContextMenu(getListView()); } @Override public void onCreateContextMenu(ContextMenu menu, View v, ContextMenuInfo menuInfo) { super.onCreateContextMenu(menu, v, menuInfo); getMenuInflater().inflate(R.menu.my_lovely_menu, menu); } @Override public boolean onContextItemSelected(MenuItem item) { AdapterContextMenuInfo info = (AdapterContextMenuInfo) item.getMenuInfo(); switch (item.getItemId()) { case R.id.delete_item: Bundle bundle = new Bundle(); bundle.putInt(POSITION_KEY, info.position); showDialog(CONFIRM_DELETE_DIALOG, bundle); return true; default: return super.onContextItemSelected(item); } } @Override protected Dialog onCreateDialog(int id, Bundle args) { switch (id) { case CONFIRM_DELETE_DIALOG: final int position = args.getInt(POSITION_KEY); AlertDialog.Builder builder = new AlertDialog.Builder(); builder.setCancelable(false); builder.setTitle(String.format( getString(R.string.confirm_delete), mAdapter.getItem(position))); DialogInterface.OnClickListener listener = new DialogInterface.OnClickListener() { public void onClick(DialogInterface dialog, int which) { switch (which) { case DialogInterface.BUTTON_POSITIVE: mAdapter.remove(mAdapter.getItem(position)); // Dismiss the dialog to ensure OnDismissListeners are notified. dialog.dismiss(); break; case DialogInterface.BUTTON_NEGATIVE: // Cancel the dialog to ensure OnCancelListeners are notified. dialog.cancel(); break; } // Remove the dialog so it is re-created next time it is required. removeDialog(CONFIRM_DELETE_DIALOG); } }; builder.setPositiveButton(android.R.string.yes, listener); builder.setNegativeButton(android.R.string.no, listener); return builder.create(); default: return super.onCreateDialog(id, args); } } }

    Read the article

  • Linux termios VTIME not working?

    - by San Jacinto
    We've been bashing our heads off of this one all morning. We've got some serial lines setup between an embedded linux device and an Ubuntu box. Our reads are getting screwed up because our code usually returns two (sometimes more, sometimes exactly one) message reads instead of one message read per actual message sent. Here is the code that opens the serial port. InterCharTime is set to 4. void COMBaseClass::OpenPort() { cerr<< "openning port"<< port <<"\n"; struct termios newtio; this->fd = -1; int fdTemp; fdTemp = open( port, O_RDWR | O_NOCTTY); if (fdTemp < 0) { portOpen = 0; cerr<<"problem openning "<< port <<". Retrying"<<endl; usleep(1000000); return; } newtio.c_cflag = BaudRate | CS8 | CLOCAL | CREAD ;//| StopBits; newtio.c_iflag = IGNPAR; newtio.c_oflag = 0; /* set input mode (non-canonical, no echo,...) */ newtio.c_lflag = 0; newtio.c_cc[VTIME] = InterCharTime; /* inter-character timer in .1 secs */ newtio.c_cc[VMIN] = readBufferSize; /* blocking read until 1 char received */ tcflush(fdTemp, TCIFLUSH); tcsetattr(fdTemp,TCSANOW,&newtio); this->fd = fdTemp; portOpen = 1; } The other end is configured similarly for communication, and has one small section of particular iterest: while (1) { sprintf(out, "\r\nHello world %lu", ++ulCount); puts(out); WritePort((BYTE *)out, strlen(out)+1); sleep(2); } //while Now, when I run a read thread on the receiving machine, "hello world" is usually broken up over a couple messages. Here is some sample output: 1: Hello 2: world 1 3: Hello 4: world 2 5: Hello 6: world 3 where number followed by a colon is one message recieved. Can you see any error we are making? Thank you. Edit: For clarity, please view section 3.2 of this resource href="http://www.faqs.org/docs/Linux-HOWTO/Serial-Programming-HOWTO.html. To my understanding, with a VTIME of a couple seconds (meaning vtime is set anywhere between 10 and 50, trial-and-error), and a VMIN of 1, there should be no reason that the message is broken up over two separate messages.

    Read the article

  • replaceAll() method using parameter from text file

    - by Herman Plani Ginting
    i have a collection of raw text in a table in database, i need to replace some words in this collection using a set of words. i put all the term to be replace and its substitutes in a text file as below min=admin lelet=lambat lemot=lambat nii=nih ntu=itu and so on. i have successfully initiate a variabel of File and Scanner to read the collection of the term and its substitutes. i loop all the dataset and save the raw text in a string in the same loop i loop all the term collection and save its row to a string name 'pattern', and split the pattern into two string named 'term' and 'replacer' in this loop i initiate a new string which its value is the string from the dataset modified by replaceAll(term,replacer) end loop for term collection then i insert the new string to another table in database end loop for dataset i do it manualy as below replaceAll("min","admin") and its works but its really something to code it manually for almost 2000 terms to be replace it. anyone ever face this kind of really something.. i really need a help now desperate :( package sentimenrepo; import javax.swing.*; import java.sql.*; import java.io.*; //import java.util.HashMap; import java.util.Scanner; //import java.util.Map; /** * * @author herman */ public class synonimReplaceV2 extends SwingWorker { protected Object doInBackground() throws Exception { new skripsisentimen.sentimenttwitter().setVisible(true); Integer row = 0; File synonimV2 = new File("synV2/catatan_kata_sinonim.txt"); String newTweet = ""; DB db = new DB(); Connection conn = db.dbConnect("jdbc:mysql://localhost:3306/tweet", "root", ""); try{ Statement select = conn.createStatement(); select.executeQuery("select * from synonimtweet"); ResultSet RS = select.getResultSet(); Scanner scSynV2 = new Scanner(synonimV2); while(RS.next()){ row++; String no = RS.getString("no"); String tweet = " "+ RS.getString("tweet"); String published = RS.getString("published"); String label = RS.getString("label"); clean2 cleanv2 = new clean2(); newTweet = cleanv2.cleanTweet(tweet); try{ Statement insert = conn.createStatement(); insert.executeUpdate("INSERT INTO synonimtweet_v2(no,tweet,published,label) values('" +no+"','"+newTweet+"','"+published+"','"+label+"')"); String current = skripsisentimen.sentimenttwitter.txtAreaResult.getText(); skripsisentimen.sentimenttwitter.txtAreaResult.setText(current+"\n"+row+"original : "+tweet+"\n"+newTweet+"\n______________________\n"); skripsisentimen.sentimenttwitter.lblStat.setText(row+" tweet read"); skripsisentimen.sentimenttwitter.txtAreaResult.setCaretPosition(skripsisentimen.sentimenttwitter.txtAreaResult.getText().length() - 1); }catch(Exception e){ skripsisentimen.sentimenttwitter.lblStat.setText(e.getMessage()); } skripsisentimen.sentimenttwitter.lblStat.setText(e.getMessage()); } }catch(Exception e){ skripsisentimen.sentimenttwitter.lblStat.setText(e.getMessage()); } return row; } class clean2{ public clean2(){} public String cleanTweet(String tweet){ File synonimV2 = new File("synV2/catatan_kata_sinonim.txt"); String pattern = ""; String term = ""; String replacer = ""; String newTweet=""; try{ Scanner scSynV2 = new Scanner(synonimV2); while(scSynV2.hasNext()){ pattern = scSynV2.next(); term = pattern.split("=")[0]; replacer = pattern.split("=")[1]; newTweet = tweet.replace(term, replacer); } }catch(Exception e){ e.printStackTrace(); } System.out.println(newTweet+"\n"+tweet); return newTweet; } } }

    Read the article

  • Not sure what happens to my apps objects when using NSURLSession in background - what state is my app in?

    - by Avner Barr
    More of a general question - I don't understand the workings of NSURLSession when using it in "background session mode". I will supply some simple contrived example code. I have a database which holds objects - such that portions of this data can be uploaded to a remote server. It is important to know which data/objects were uploaded in order to accurately display information to the user. It is also important to be able to upload to the server in a background task because the app can be killed at any point. for instance a simple profile picture object: @interface ProfilePicture : NSObject @property int userId; @property UIImage *profilePicture; @property BOOL successfullyUploaded; // we want to know if the image was uploaded to out server - this could also be a property that is queryable but lets assume this is attached to this object @end Now Lets say I want to upload the profile picture to a remote server - I could do something like: @implementation ProfilePictureUploader -(void)uploadProfilePicture:(ProfilePicture *)profilePicture completion:(void(^)(BOOL successInUploading))completion { NSUrlSession *uploadImageSession = ..... // code to setup uploading the image - and calling the completion handler; [uploadImageSession resume]; } @end Now somewhere else in my code I want to upload the profile picture - and if it was successful update the UI and the database that this action happened: ProfilePicture *aNewProfilePicture = ...; aNewProfilePicture.profilePicture = aImage; aNewProfilePicture.userId = 123; aNewProfilePicture.successfullyUploaded = NO; // write the change to disk [MyDatabase write:aNewProfilePicture]; // upload the image to the server ProfilePictureUploader *uploader = [ProfilePictureUploader ....]; [uploader uploadProfilePicture:aNewProfilePicture completion:^(BOOL successInUploading) { if (successInUploading) { // persist the change to my db. aNewProfilePicture.successfullyUploaded = YES; [Mydase update:aNewProfilePicture]; // persist the change } }]; Now obviously if my app is running then this "ProfilePicture" object is successfully uploaded and all is well - the database object has its own internal workings with data structures/caches and what not. All callbacks that may exist are maintained and the app state is straightforward. But I'm not clear what happens if the app "dies" at some point during the upload. It seems that any callbacks/notifications are dead. According to the API documentation- the uploading is handled by a separate process. Therefor the upload will continue and my app will be awakened at some point in the future to handle completion. But the object "aNewProfilePicture" is non existant at that point and all callbacks/objects are gone. I don't understand what context exists at this point. How am I supposed to ensure consistency in my DB and UI (For instance update the "successfullyUploaded" property for that user)? Do I need to re-work everything touching the DB or UI to correspond with the new API and work in a context free environment?

    Read the article

  • Photo inside the image view should not go cross on dragging

    - by TGMCians
    I want photo inside the imageview should not go outside on dragging. In my code when i start to drag bitmap inside the imageview its goes out from imageview but i want when it cross the imageview its should come at starting point of imageview. How to achieve this. please help me for this. @Override protected void onDraw(Canvas canvas) { super.onDraw(canvas); canvas.save(); scaleCount=scaleCount+scale; angleCount = addAngle(angleCount, Math.toDegrees(angle)); Log.v("Positions", "X: "+x+" " + "Y: "+y); Log.d("ScaleCount", String.valueOf(scaleCount)); Log.d("Angle", String.valueOf(angleCount)); if (!isInitialized) { int w = getWidth(); int h = getHeight(); position.set(w / 2, h / 2); isInitialized = true; } Paint paint = new Paint(); Log.v("Height and Width", "Height: "+ getHeight() + "Width: "+ getWidth()); transform.reset(); transform.postTranslate(-width / 2.0f, -height / 2.0f); transform.postRotate((float) Math.toDegrees(angle)); transform.postScale(scale, scale); transform.postTranslate(position.getX(), position.getY()); canvas.drawBitmap(bitmap, transform, paint); canvas.restore(); BitmapWidth=BitmapWidth+bitmap.getScaledWidth(canvas); BitmapHeight=BitmapHeight+bitmap.getScaledHeight(canvas); try { /*paint.setColor(0xFF007F00); canvas.drawCircle(vca.getX(), vca.getY(), 30, paint); paint.setColor(0xFF7F0000); canvas.drawCircle(vcb.getX(), vcb.getY(), 30, paint);*/ /*paint.setColor(0xFFFF0000); canvas.drawLine(vpa.getX(), vpa.getY(), vpb.getX(), vpb.getY(), paint); paint.setColor(0xFF00FF00); canvas.drawLine(vca.getX(), vca.getY(), vcb.getX(), vcb.getY(), paint);*/ } catch(NullPointerException e) { // Just being lazy here... } } @Override public boolean onTouch(View v, MotionEvent event) { vca = null; vcb = null; vpa = null; vpb = null; x=event.getX(); y=event.getY(); try { touchManager.update(event); if (touchManager.getPressCount() == 1) { vca = touchManager.getPoint(0); vpa = touchManager.getPreviousPoint(0); position.add(touchManager.moveDelta(0)); } else { if (touchManager.getPressCount() == 2) { vca = touchManager.getPoint(0); vpa = touchManager.getPreviousPoint(0); vcb = touchManager.getPoint(1); vpb = touchManager.getPreviousPoint(1); VMVector2D current = touchManager.getVector(0, 1); VMVector2D previous = touchManager.getPreviousVector(0, 1); float currentDistance = current.getLength(); float previousDistance = previous.getLength(); if (currentDistance-previousDistance != 0) { scale *= currentDistance / previousDistance; } angle -= VMVector2D.getSignedAngleBetween(current, previous); /*angleCount=angleCount+angle;*/ } } invalidate(); } catch(Exception exception) { // Log.d("VM", exception.getMessage()); } return true; }

    Read the article

  • Having different database sorting order (default_scope) for two different views

    - by Juniper747
    In my model (pins.rb), I have two sorting orders: default_scope order: 'pins.featured DESC' #for adding featured posts to the top of a list default_scope order: 'pins.created_at DESC' #for adding the remaining posts beneath the featured posts This sorting order (above) is how I want my 'pins view' (index.html.erb) to look. Which is just a list of ALL user posts. In my 'users view' (show.html.erb) I am using the same model (pins.rb) to list only current_user pins. HOWEVER, I want to sorting order to ignore the "featured" default scope and only use the second scope: default_scope order: 'pins.created_at DESC' How can I accomplish this? I tried doing something like this: default_scope order: 'pins.featured DESC', only: :index default_scope order: 'pins.created_at DESC' But that didn't fly... UPDATE I updated my model to define a scope: scope :featy, order: 'pins.featured DESC' default_scope order: 'pins.created_at DESC' And updated my pins view to: <%= render @pins.featy %> However, now when I open my pins view, I get the error: undefined method `featy' for #<Array:0x00000100ddbc78> UPDATE 2 User.rb class User < ActiveRecord::Base attr_accessible :name, :email, :username, :password, :password_confirmation, :avatar, :password_reset_token, :password_reset_sent_at has_secure_password has_many :pins, dependent: :destroy #destroys user posts when user is destroyed # has_many :featured_pins, order: 'featured DESC', class_name: "Pin", source: :pin has_attached_file :avatar, :styles => { :medium => "300x300#", :thumb => "120x120#" } before_save { |user| user.email = user.email.downcase } before_save { |user| user.username = user.username.downcase } before_save :create_remember_token before_save :capitalize_name validates :name, presence: true, length: { maximum: 50 } VALID_EMAIL_REGEX = /\A[\w+\-.]+@[a-z\d\-.]+\.[a-z]+\z/i VALID_USERNAME_REGEX = /^[A-Za-z0-9]+(?:[_][A-Za-z0-9]+)*$/ validates :email, presence: true, format: { with: VALID_EMAIL_REGEX }, uniqueness: { case_sensitive: false } validates :username, presence: true, format: { with: VALID_USERNAME_REGEX }, uniqueness: { case_sensitive: false } validates :password, length: { minimum: 6 }, on: :create #on create, because was causing erros on pw_reset Pin.rb class Pin < ActiveRecord::Base attr_accessible :content, :title, :privacy, :date, :dark, :bright, :fragmented, :hashtag, :emotion, :user_id, :imagesource, :imageowner, :featured belongs_to :user before_save :capitalize_title before_validation :generate_slug validates :content, presence: true, length: { maximum: 8000 } validates :title, presence: true, length: { maximum: 24 } validates :imagesource, presence: { message: "Please search and choose an image" }, length: { maximum: 255 } validates_inclusion_of :privacy, :in => [true, false] validates :slug, uniqueness: true, presence: true, exclusion: {in: %w[signup signin signout home info privacy]} # for sorting featured and newest posts first default_scope order: 'pins.created_at DESC' scope :featured_order, order: 'pins.featured DESC' def to_param slug # or "#{id}-#{name}".parameterize end def generate_slug # makes the url slug address bar freindly self.slug ||= loop do random_token = Digest::MD5.hexdigest(Time.zone.now.to_s + title)[0..9]+"-"+"#{title}".parameterize break random_token unless Pin.where(slug: random_token).exists? end end protected def capitalize_title self.title = title.split.map(&:capitalize).join(' ') end end users_controller.rb class UsersController < ApplicationController before_filter :signed_in_user, only: [:edit, :update, :show] before_filter :correct_user, only: [:edit, :update, :show] before_filter :admin_user, only: :destroy def index if !current_user.admin? redirect_to root_path end end def menu @user = current_user end def show @user = User.find(params[:id]) @pins = @user.pins current_user.touch(:last_log_in) #sets the last log in time if [email protected]? render 'pages/info/' end end def new @user = User.new end pins_controller.rb class PinsController < ApplicationController before_filter :signed_in_user, except: [:show] # GET /pins, GET /pins.json def index #Live Feed @pins = Pin.all @featured_pins = Pin.featured_order respond_to do |format| format.html # index.html.erb format.json { render json: @pins } end end # GET /pins, GET /pins.json def show #single Pin View @pin = Pin.find_by_slug!(params[:id]) require 'uri' #this gets the photo's id from the stored uri @image_id = URI(@pin.imagesource).path.split('/').second if @pin.privacy == true #check for private pins if signed_in? if @pin.user_id == current_user.id respond_to do |format| format.html # show.html.erb format.json { render json: @pin } end else redirect_to home_path, notice: "Prohibited 1" end else redirect_to home_path, notice: "Prohibited 2" end else respond_to do |format| format.html # show.html.erb format.json { render json: @pin } end end end # GET /pins, GET /pins.json def new @pin = current_user.pins.new respond_to do |format| format.html # new.html.erb format.json { render json: @pin } end end # GET /pins/1/edit def edit @pin = current_user.pins.find_by_slug!(params[:id]) end Finally, on my index.html.erb I have: <%= render @featured_pins %>

    Read the article

  • Invalid Cast Exception with Update Panel

    - by user1593175
    On Button Click Protected Sub btnSubmit_Click(sender As Object, e As System.EventArgs) Handles btnSubmit.Click MsgBox("INSIDE") If SocialAuthUser.IsLoggedIn Then Dim accountId As Integer = BLL.getAccIDFromSocialAuthSession Dim AlbumID As Integer = BLL.createAndReturnNewAlbumId(txtStoryTitle.Text.Trim, "") Dim URL As String = BLL.getAlbumPicUrl(txtStoryTitle.Text.Trim) Dim dt As New DataTable dt.Columns.Add("PictureID") dt.Columns.Add("AccountID") dt.Columns.Add("AlbumID") dt.Columns.Add("URL") dt.Columns.Add("Thumbnail") dt.Columns.Add("Description") dt.Columns.Add("AlbumCover") dt.Columns.Add("Tags") dt.Columns.Add("Votes") dt.Columns.Add("Abused") dt.Columns.Add("isActive") Dim Row As DataRow Dim uniqueFileName As String = "" If Session("ID") Is Nothing Then lblMessage.Text = "You don't seem to have uploaded any pictures." Exit Sub Else **Dim FileCount As Integer = Request.Form(Request.Form.Count - 2)** Dim FileName, TargetName As String Try Dim Path As String = Server.MapPath(BLL.getAlbumPicUrl(txtStoryTitle.Text.Trim)) If Not IO.Directory.Exists(Path) Then IO.Directory.CreateDirectory(Path) End If Dim StartIndex As Integer Dim PicCount As Integer For i As Integer = 0 To Request.Form.Count - 1 If Request.Form(i).ToLower.Contains("jpg") Or Request.Form(i).ToLower.Contains("gif") Or Request.Form(i).ToLower.Contains("png") Then StartIndex = i + 1 Exit For End If Next For i As Integer = StartIndex To Request.Form.Count - 4 Step 3 FileName = Request.Form(i) '## If part here is not kaam ka..but still using it for worst case scenario If IO.File.Exists(Path & FileName) Then TargetName = Path & FileName 'MsgBox(TargetName & "--- 1") Dim j As Integer = 1 While IO.File.Exists(TargetName) TargetName = Path & IO.Path.GetFileNameWithoutExtension(FileName) & "(" & j & ")" & IO.Path.GetExtension(FileName) j += 1 End While Else uniqueFileName = Guid.NewGuid.ToString & "__" & FileName TargetName = Path & uniqueFileName End If IO.File.Move(Server.MapPath("~/TempUploads/" & Session("ID") & "/" & FileName), TargetName) PicCount += 1 Row = dt.NewRow() Row(1) = accountId Row(2) = AlbumID Row(3) = URL & uniqueFileName Row(4) = "" Row(5) = "No Desc" Row(6) = "False" Row(7) = "" Row(8) = "0" Row(9) = "0" Row(10) = "True" dt.Rows.Add(Row) Next If BLL.insertImagesIntoAlbum(dt) Then lblMessage.Text = PicCount & IIf(PicCount = 1, " Picture", " Pictures") & " Saved!" lblMessage.ForeColor = Drawing.Color.Black Dim db As SqlDatabase = Connection.connection Using cmd As DbCommand = db.GetSqlStringCommand("SELECT PictureID,URL FROM AlbumPictures WHERE AlbumID=@AlbumID AND AccountID=@AccountID") db.AddInParameter(cmd, "AlbumID", Data.DbType.Int32, AlbumID) db.AddInParameter(cmd, "AccountID", Data.DbType.Int32, accountId) Using ds As DataSet = db.ExecuteDataSet(cmd) If ds.Tables(0).Rows.Count > 0 Then ListView1.DataSource = ds.Tables(0) ListView1.DataBind() Else lblMessage.Text = "No Such Album Exists." End If End Using End Using 'WebNavigator.GoToResponseRedirect(WebNavigator.URLFor.ReturnUrl("~/Memories/SortImages.aspx?id=" & AlbumID)) Else 'TODO:we'll show some error msg End If Catch ex As Exception MsgBox(ex.Message) lblMessage.Text = "Oo Poop!!" End Try End If Else WebNavigator.GoToResponseRedirect(WebNavigator.URLFor.LoginWithReturnUrl("~/Memories/CreateAlbum.aspx")) Exit Sub End If End Sub The above code works fine.I have added an Update Panel in the page to avoid post back, But when i add the button click as a trigger <Triggers> <asp:AsyncPostBackTrigger ControlID="btnSubmit" /> </Triggers> in the update panel to avoid post back, i get the following error.This happens when i add the button click as a Trigger to the update panel.

    Read the article

  • Why does OpenGL's glDrawArrays() fail with GL_INVALID_OPERATION under Core Profile 3.2, but not 3.3 or 4.2?

    - by metaleap
    I have OpenGL rendering code calling glDrawArrays that works flawlessly when the OpenGL context is (automatically / implicitly obtained) 4.2 but fails consistently (GL_INVALID_OPERATION) with an explicitly requested OpenGL core context 3.2. (Shaders are always set to #version 150 in both cases but that's beside the point here I suspect.) According to specs, there are only two instances when glDrawArrays() fails with GL_INVALID_OPERATION: "if a non-zero buffer object name is bound to an enabled array and the buffer object's data store is currently mapped" -- I'm not doing any buffer mapping at this point "if a geometry shader is active and mode? is incompatible with [...]" -- nope, no geometry shaders as of now. Furthermore: I have verified & double-checked that it's only the glDrawArrays() calls failing. Also double-checked that all arguments passed to glDrawArrays() are identical under both GL versions, buffer bindings too. This happens across 3 different nvidia GPUs and 2 different OSes (Win7 and OSX, both 64-bit -- of course, in OSX we have only the 3.2 context, no 4.2 anyway). It does not happen with an integrated "Intel HD" GPU but for that one, I only get an automatic implicit 3.3 context (trying to explicitly force a 3.2 core profile with this GPU via GLFW here fails the window creation but that's an entirely different issue...) For what it's worth, here's the relevant routine excerpted from the render loop, in Golang: func (me *TMesh) render () { curMesh = me curTechnique.OnRenderMesh() gl.BindBuffer(gl.ARRAY_BUFFER, me.glVertBuf) if me.glElemBuf > 0 { gl.BindBuffer(gl.ELEMENT_ARRAY_BUFFER, me.glElemBuf) gl.VertexAttribPointer(curProg.AttrLocs["aPos"], 3, gl.FLOAT, gl.FALSE, 0, gl.Pointer(nil)) gl.DrawElements(me.glMode, me.glNumIndices, gl.UNSIGNED_INT, gl.Pointer(nil)) gl.BindBuffer(gl.ELEMENT_ARRAY_BUFFER, 0) } else { gl.VertexAttribPointer(curProg.AttrLocs["aPos"], 3, gl.FLOAT, gl.FALSE, 0, gl.Pointer(nil)) /* BOOM! */ gl.DrawArrays(me.glMode, 0, me.glNumVerts) } gl.BindBuffer(gl.ARRAY_BUFFER, 0) } So of course this is part of a bigger render-loop, though the whole "*TMesh" construction for now is just two instances, one a simple cube and the other a simple pyramid. What matters is that the entire drawing loop works flawlessly with no errors reported when GL is queried for errors under both 3.3 and 4.2, yet on 3 nvidia GPUs with an explicit 3.2 core profile fails with an error code that according to spec is only invoked in two specific situations, none of which as far as I can tell apply here. What could be wrong here? Have you ever run into this? Any ideas what I have been missing?

    Read the article

  • Why my onsubmitg is not firing - Spring

    - by GigaPr
    Hi, i have a controller public class EditUserController extends BaseController { public EditUserController() { setCommandClass(User.class); setCommandName("editaUser"); } public ModelAndView handleRequest(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { ModelAndView modelAndView = new ModelAndView("editUser"); String id = request.getParameter("id"); if(!id.isEmpty()) { User user = this.userServiceImplementation.get(Integer.parseInt(id)); modelAndView.addObject("editaUser", user); } return modelAndView; } } and the view <form:form method="POST" commandName="editaUser" cssClass="addUserForm"> <div class="floatL"> <div class="padding5"> <div class="fieldContainer"> <strong>First Name:</strong>&nbsp; </div> <form:errors path="firstName" cssClass="error"/> <form:input path="firstName" cssClass="textArea" /> </div> <div class="padding5"> <div class="fieldContainer"> <strong>Last Name:</strong>&nbsp; </div> <form:errors path="lastName" cssClass="error"/> <form:input path="lastName" cssClass="textArea" /> </div> </div> <div class="floatR"> <div class="padding5"> <div class="fieldContainer"> <strong>Username:</strong>&nbsp; </div> <form:errors path="username" cssClass="error"/> <form:input path="username" cssClass="textArea" /> </div> <div class="padding5"> <div class="fieldContainer"> <strong>Password</strong>&nbsp; </div> <form:errors path="password" cssClass="error"/> <form:input path="password" cssClass="textArea"/> </div> </div> <input type="submit" class="floatR" value="Save" > </form:form> and the bean definition looks like <bean name="/editUser.htm" class="com.rssFeed.mvc.EditUserController"> <property name="userServiceImplementation" ref="userServiceImplementation"/> <property name="commandName" value="editaUser" /> <property name="successView" value="users"/> <property name="sessionForm" value="true"/> </bean> I populate the view using the querystring but i would lke to update the record in the database on click of the submit button. i tried to insert a on submit method protected ModelAndView onSubmit(Object command, BindException bindException) throws Exception { return new ModelAndView(getSuccessView()); } but it never fires What is the problem i do not get it?? thanks

    Read the article

  • Android - Resuming application state - SL4A

    - by toyotajon93
    please dont harpoon me for a noob-ish question. I am working on an android application using SL4A, when my application starts it runs in the background while the script is being executed. I'm not sure where to start but each time I click my icon, it re-starts my application. I have tried using different launchmodes with nothing different happening. I'm thinking it has to do with the OnCreate code, and the setting of the notification. I need help saving my application state and then resuming on either re-click of icon or click from notification bar. I've tried everything had to turn here for help. I am not a pro at android programming by any means. Thanks guys, be gentle ;) Public void onCreate() { super.onCreate(); mInterpreterConfiguration = ((BaseApplication) getApplication()) .getInterpreterConfiguration(); } @Override public void onStart(Intent intent, final int startId) { super.onStart(intent, startId); String fileName = Script.getFileName(this); Interpreter interpreter = mInterpreterConfiguration .getInterpreterForScript(fileName); if (interpreter == null || !interpreter.isInstalled()) { mLatch.countDown(); if (FeaturedInterpreters.isSupported(fileName)) { Intent i = new Intent(this, DialogActivity.class); i.addFlags(Intent.FLAG_ACTIVITY_NEW_TASK); i.putExtra(Constants.EXTRA_SCRIPT_PATH, fileName); startActivity(i); } else { Log .e(this, "Cannot find an interpreter for script " + fileName); } stopSelf(startId); return; } // Copies script to internal memory. fileName = InterpreterUtils.getInterpreterRoot(this).getAbsolutePath() + "/" + fileName; File script = new File(fileName); // TODO(raaar): Check size here! if (!script.exists()) { script = FileUtils.copyFromStream(fileName, getResources() .openRawResource(Script.ID)); } copyResourcesToLocal(); // Copy all resources if (Script.getFileExtension(this) .equals(HtmlInterpreter.HTML_EXTENSION)) { HtmlActivityTask htmlTask = ScriptLauncher.launchHtmlScript(script, this, intent, mInterpreterConfiguration); mFacadeManager = htmlTask.getRpcReceiverManager(); mLatch.countDown(); stopSelf(startId); } else { mProxy = new AndroidProxy(this, null, true); mProxy.startLocal(); mLatch.countDown(); ScriptLauncher.launchScript(script, mInterpreterConfiguration, mProxy, new Runnable() { @Override public void run() { mProxy.shutdown(); stopSelf(startId); } }); } } RpcReceiverManager getRpcReceiverManager() throws InterruptedException { mLatch.await(); if (mFacadeManager==null) { // Facade manage may not be available on startup. mFacadeManager = mProxy.getRpcReceiverManagerFactory() .getRpcReceiverManagers().get(0); } return mFacadeManager; } @Override protected Notification createNotification() { Notification notification = new Notification(R.drawable.script_logo_48, this.getString(R.string.loading), System.currentTimeMillis()); // This contentIntent is a noop. PendingIntent contentIntent = PendingIntent.getService(this, 0, new Intent(), 0); notification.setLatestEventInfo(this, this.getString(R.string.app_name), this.getString(R.string.loading), contentIntent); notification.flags = Notification.FLAG_ONGOING_EVENT; return notification; }

    Read the article

  • Android Sqlite - obtaining the correct database row id

    - by Dan_Dan_Man
    I'm working on an app that allows the user to create notes while rehearsing a play. The user can view the notes they have created in a listview, and edit and delete them if they wish. Take for example the user creates 3 notes. In the database, the row_id's will be 1, 2 and 3. So when the user views the notes in the listview, they will also be in the order 1, 2, 3 (intially 0, 1, 2 before I increment the values). So the user can view and delete the correct row from the database. The problem arises when the user decides to delete a note. Say the user deletes the note in position 2. Thus our database will have row_id's 1 and 3. But in the listview, they will be in the position 1 and 2. So if the user clicks on the note in position 2 in the listview it should return the row in the database with row_id 3. However it tries to look for the row_id 2 which doesn't exist, and hence crashes. I need to know how to obtain the corresponding row_id, given the user's selection in the listview. Here is the code below that does this: // When the user selects "Delete" in context menu public boolean onContextItemSelected(MenuItem item) { AdapterContextMenuInfo info = (AdapterContextMenuInfo) item .getMenuInfo(); switch (item.getItemId()) { case DELETE_ID: deleteNote(info.id + 1); return true; } return super.onContextItemSelected(item); } // This method actually deletes the selected note private void deleteNote(long id) { Log.d(TAG, "Deleting row: " + id); mNDbAdapter.deleteNote(id); mCursor = mNDbAdapter.fetchAllNotes(); startManagingCursor(mCursor); fillData(); // TODO: Update play database if there are no notes left for a line. } // When the user clicks on an item, display the selected note protected void onListItemClick(ListView l, View v, int position, long id) { super.onListItemClick(l, v, position, id); viewNote(id, "", "", true); } // This is where we display the note in a custom alert dialog. I've ommited // the rest of the code in this method because the problem lies in this line: // "mCursor = mNDbAdapter.fetchNote(newId);" // I need to replace "newId" with the row_id in the database. private void viewNote(long id, String defaultTitle, String defaultNote, boolean fresh) { final int lineNumber; String title; String note; id++; final long newId = id; Log.d(TAG, "Returning row: " + newId); mCursor = mNDbAdapter.fetchNote(newId); lineNumber = (mCursor.getInt(mCursor.getColumnIndex("number"))); title = (mCursor.getString(mCursor.getColumnIndex("title"))); note = (mCursor.getString(mCursor.getColumnIndex("note"))); . . . } Let me know if you would like me to show anymore code. It seems like something so simple but I just can't find a solution. Thanks!

    Read the article

  • sys.path() and PYTHONPATH issues

    - by Justin
    I've been learning Python, I'm working in 2.7.3, and I'm trying to understand import statements. The documentation says that when you attempt to import a module, the interpreter will first search for one of the built-in modules. What is meant by a built-in module? Then, the documentation says that the interpreter searches in the directories listed by sys.path, and that sys.path is initialized from these sources: the directory containing the input script (or the current directory). PYTHONPATH (a list of directory names, with the same syntax as the shell variable PATH). the installation-dependent default. Here is a sample output of a sys.path command from my computer using python in command-line mode: (I deleted a few so that it wouldn't be huge) ['', '/usr/lib/python2.7', '/usr/lib/python2.7/lib-old', '/usr/lib/python2.7/lib-dynload', '/usr/local/lib/python2.7/dist-packages', '/usr/lib/python2.7/dist-packages', '/usr/lib/python2.7/dist-packages/PIL', '/usr/lib/python2.7/dist-packages/gst-0.10', '/usr/lib/python2.7/dist-packages/gtk-2.0', '/usr/lib/pymodules/python2.7', '/usr/lib/python2.7/dist-packages/ubuntuone-couch', '/usr/lib/python2.7/dist-packages/ubuntuone-storage-protocol'] Now, I'm assuming that the '' path refers to the directory containing the 'script', and so I figured the rest of them would be coming from my PYTHONPATH environmental variable. However, when I go to the terminal and type env, PYTHONPATH doesn't exist as an environmental variable. I also tried import os then os.environ, but I get the same output. Do I really not have a PYTHONPATH environmental variable? I don't believe I ever specifically defined a PYTHONPATH environmental variable, but I assumed that when I installed new packages they automatically altered that environment variable. If I don't have a PYTHONPATH, how is my sys.path getting populated? If I download new packages, how does Python know where to look for them if I don't have this PYTHONPATH variable? How do environment variables work? From what I understand, environment variables are specific to the process for which they are set, however, if I open multiple terminal windows and run env, they all display a number of identical variables, for example, PATH. I know there file locations for persistent environment variables, for example /etc/environment, which contains my PATH variable. Is it possible to tell where a persistent environment variable is stored? What is the recommended location for storing new persistent environment variables? How do environment variables actually work with say, the Python interpreter? The Python interpreter looks for PYTHONPATH, but how does it work at the nitty-gritty level?

    Read the article

  • [C++] Adding a string or char array to a byte vector

    - by xeross
    I'm currently working on a class to create and read out packets send through the network, so far I have it working with 16bit and 8bit integers (Well unsigned but still). Now the problem is I've tried numerous ways of copying it over but somehow the _buffer got mangled, it segfaulted, or the result was wrong. I'd appreciate if someone could show me a working example. My current code can be seen below. Thanks, Xeross Main #include <iostream> #include <stdio.h> #include "Packet.h" using namespace std; int main(int argc, char** argv) { cout << "#################################" << endl; cout << "# Internal Use Only #" << endl; cout << "# Codename PACKETSTORM #" << endl; cout << "#################################" << endl; cout << endl; Packet packet = Packet(); packet.SetOpcode(0x1f4d); cout << "Current opcode is: " << packet.GetOpcode() << endl << endl; packet.add(uint8_t(5)) .add(uint16_t(4000)) .add(uint8_t(5)); for(uint8_t i=0; i<10;i++) printf("Byte %u = %x\n", i, packet._buffer[i]); printf("\nReading them out: \n1 = %u\n2 = %u\n3 = %u\n4 = %s", packet.readUint8(), packet.readUint16(), packet.readUint8()); return 0; } Packet.h #ifndef _PACKET_H_ #define _PACKET_H_ #include <iostream> #include <vector> #include <stdio.h> #include <stdint.h> #include <string.h> using namespace std; class Packet { public: Packet() : m_opcode(0), _buffer(0), _wpos(0), _rpos(0) {} Packet(uint16_t opcode) : m_opcode(opcode), _buffer(0), _wpos(0), _rpos(0) {} uint16_t GetOpcode() { return m_opcode; } void SetOpcode(uint16_t opcode) { m_opcode = opcode; } Packet& add(uint8_t value) { if(_buffer.size() < _wpos + 1) _buffer.resize(_wpos + 1); memcpy(&_buffer[_wpos], &value, 1); _wpos += 1; return *this; } Packet& add(uint16_t value) { if(_buffer.size() < _wpos + 2) _buffer.resize(_wpos + 2); memcpy(&_buffer[_wpos], &value, 2); _wpos += 2; return *this; } uint8_t readUint8() { uint8_t result = _buffer[_rpos]; _rpos += sizeof(uint8_t); return result; } uint16_t readUint16() { uint16_t result; memcpy(&result, &_buffer[_rpos], sizeof(uint16_t)); _rpos += sizeof(uint16_t); return result; } uint16_t m_opcode; std::vector<uint8_t> _buffer; protected: size_t _wpos; // Write position size_t _rpos; // Read position }; #endif // _PACKET_H_

    Read the article

  • Device drivers and Windows

    - by b-gen-jack-o-neill
    Hi, I am trying to complete the picture of how the PC and the OS interacts together. And I am at point, where I am little out of guess when it comes to device drivers. Please, don´t write things like its too complicated, or you don´t need to know when using high programming laguage and winapi functions. I want to know, it´s for study purposes. So, the very basic structure of how OS and PC (by PC I mean of course HW) is how I see it is that all other than direct CPU commands, which can CPU do on itself (arithmetic operation, its registers access and memory access) must pass thru OS. Mainly becouse from ring level 3 you cannot use in and out intructions which are used for acesing other HW. I know that there is MMIO,but it must be set by port comunication first. It was not like this all the time. Even I am bit young to remember MSDOS, I know you could access HW directly, becouse there ws no limitation, no ring mode. So you could to write string to diplay use wheather DOS function, or directly acess video card memory and write it by yourself. But as OS developed, there is no longer this possibility. But it is fine, since OS now handles all the HW comunication, and frankly it more convinient and much more safe (I would say the only option) in multitasking environment. So nowdays you instead of using int instructions to use BIOS mapped function or DOS function you call dll which internally than handles everything you don´t need to know about. I understand this. I also undrstand that device drivers is the piece of code that runs in ring level 0, so it can do all the HW interactions. But what I don´t understand is connection between OS and device driver. Let´s take a example - I want to make a sound card make a sound. So I call windows API to acess sound card, but what happens than? Does windows call device drivers to do so? But if it does call device driver, does it mean, that all device drivers which can be called by winAPI function, must have routines named in some specific way? I mean, when I have new sound card, must its drivers have functions named same as the old one? So Windows can actually call the same function from its perspective? But if Windows have predefined sets of functions requored by device drivers, that it cannot use new drivers that doesent existed before last version of OS came out. Please, help me understand this mess. I am really getting mad. Thanks.

    Read the article

  • Browsers (IE and Firefox) freeze when copying large amount of text

    - by Matt
    I have a web application - a Java servlet - that delivers data to users in the form of a text printout in a browser (text marked up with HTML in order to display in the browser as we want it to). The text does display in different colors, though most of it is black. One typical mode of operation is this: 1. User submits a form to request data. 2. Servlet delivers HTML file to browser. 3. User does CTRL+A to select all the text. 4. User does CTRL+C to copy all the text. 5. User goes to a text editor and does CTRL+V to paste the text. In the testing where I'm having this problem, step #2 successfully loads all the data - we wait for that to complete. We can scroll down to the end of what the browser loaded and see the end of the data. However, the browser freezes on step #3 (Firefox) or on step #4 (IE). Because step #2 finishes, I think it is a browser/memory issue, and not an issue with the web application. If I run queries to deliver smaller amounts of data (but after several queries we get the same data we would have above in one query) and copy/paste this text, the file I save it into ends up being about 8 MB. If I save the browser's displayed HTML to a file on my computer via File-Save As from the browser menu, it works fine and the file is about 22 MB. We've tried this on 2 different computers at work (both running Windows XP, with at least 2 GB of RAM and many GB of free disk space), using Firefox and IE. We also tried it on a home computer from a home network outside of work (thinking it might be our IT security software causing the problem), running Windows 7 using IE, and still had the problem. When I've done this, I can see whatever browser I'm using utilizing the CPU at 50%. Firefox's memory usage grows to about 1 GB; IE's stays in the several hundred MBs. We once let this run for half an hour, and it did not complete. I'm most likely going to modify the web app to have an option of delivering a plain text file for download, and I imagine that will get the users what they need. But for the mean time, and because I'm curious - and I don't like my application freezing people's browsers, does anyone have any ideas about the browser freezing? I understand that sometimes you just reach your memory limit, but 22 MB sounds to me like an amount I should be able to copy to the clipboard.

    Read the article

  • Exceptions confusion

    - by Misiur
    Hi there. I'm trying to build site using OOP in PHP. Everyone is talking about Singleton, hermetization, MVC, and using exceptions. So I've tried to do it like this: Class building whole site: class Core { public $is_core; public $theme; private $db; public $language; private $info; static private $instance; public function __construct($lang = 'eng', $theme = 'default') { if(!self::$instance) { try { $this->db = new sdb(DB_TYPE.':host='.DB_HOST.';dbname='.DB_NAME, DB_USER, DB_PASS); } catch(PDOException $e) { throw new CoreException($e->getMessage()); } try { $this->language = new Language($lang); } catch(LangException $e) { throw new CoreException($e->getMessage()); } try { $this->theme = new Theme($theme); } catch(ThemeException $e) { throw new CoreException($e->getMessage()); } } return self::$instance; } public function getSite($what) { return $this->language->getLang(); } private function __clone() { } } Class managing themes class Theme { private $theme; public function __construct($name = 'default') { if(!is_dir("themes/$name")) { throw new ThemeException("Unable to load theme $name"); } else { $this->theme = $name; } } public function getTheme() { return $this->theme; } public function display($part) { if(!is_file("themes/$this->theme/$part.php")) { throw new ThemeException("Unable to load theme part: themes/$this->theme/$part.php"); } else { return 'So far so good'; } } } And usage: error_reporting(E_ALL); require_once('config.php'); require_once('functions.php'); try { $core = new Core(); } catch(CoreException $e) { echo 'Core Exception: '.$e->getMessage(); } echo $core->theme->getTheme(); echo "<br />"; echo $core->language->getLang(); try { $core->theme->display('footer'); } catch(ThemeException $e) { echo $e->getMessage(); } I don't like those exception handlers - i don't want to catch them like some pokemons... I want to use things simple: $core-theme-display('footer'); And if something is wrong, and debug mode is enabled, then aplication show error. What should i do?

    Read the article

  • Setting a DataGrid background color based on the previous row

    - by Zipper
    I'm trying to setup a grid where I do column sorting, but I wanted to do zebra striping, only rather than every other row or every x rows, I want it to be based on the value of cells. i.e. All cells that contain 0 have a blue background, the next value would have a white background, the next value would be blue, etc.... The problem I have is that I can't seem to find where to actually do the setting of the background colors. I'm using a custom sorter and I tried setting it in there after I re-order the list and set the data source, but it appears that when the data source is set, that the rows don't exist yet. I tried using the DataContextChanged, but that event doesn't seem to be firing. Here is what I have now. namespace Foo.Bar { public partial class FooBar { List<Bla> ResultList { get; set; } SolidColorBrush stripeOneColor = new SolidColorBrush(Colors.Gold); SolidColorBrush stripeTwoColor = new SolidColorBrush(Colors.White); //********************************************************************************************* public Consistency() { InitializeComponent(); } //********************************************************************************************* override protected void PopulateTabWithData() { ResultList = GetBlas(); SortAndGroup("Source"); } //********************************************************************************************* private void SortAndGroup(string colName) { IOrderedEnumerable <Bla> ordered = null; switch (colName) { case "Source": case "ID": ordered = ResultList.OrderBy(r => r.Source).ThenBy(r => r.ID); break; case "Name": ordered = ResultList.OrderBy(r => r.Source).ThenBy(r => r.Name); break; case "Message": ordered = ResultList.OrderBy(r => r.Message); break; default: throw new Exception(colName); } ResultList = ordered.ThenBy(r => r.Source).ThenBy(r => r.ID).ToList(); // tie-breakers consistencyDataGrid.ItemsSource = null; consistencyDataGrid.ItemsSource = ResultList; ColorRows(); } //********************************************************************************************* private void consistencyDataGrid_Sorting(object sender, System.Windows.Controls.DataGridSortingEventArgs e) { SortAndGroup(e.Column.Header.ToString()); e.Handled = true; } private void ColorRows() { for (var i = 0; i < ResultList.Count; i++) { var currentItem = ResultList[i]; var row = myDataGrid.ItemContainerGenerator.ContainerFromItem(currentItem) as DataGridRow; if (row == null) { continue; } if (i > 0) { var previousItem = ResultList[i - 1]; var previousRow = myDataGrid.ItemContainerGenerator.ContainerFromItem(previousItem) as DataGridRow; if (currentItem.Source == previousItem.Source) { row.Background = previousRow.Background; } else { if (previousRow.Background == stripeOneColor) { row.Background = stripeTwoColor; } else { row.Background = stripeOneColor; } } } else { row.Background = stripeOneColor; } } } } } }

    Read the article

  • Trouble editing Word document with PHP

    - by bhoomi-nature
    I want to open a word document and edit it I am opening the word document from the server and at that time it's opening with garbage values (perhaps it's not being properly converted to UTF-8). When I delete those garbage values and insert something from a textarea to that file it is going to insert and from then on it opens properly. I would like the document to open with the English words in the document instead of garbage value - it's only the first opening that's broken at present. <? $filename = 'test.doc'; if(isset($_REQUEST['Submit'])){ $somecontent = stripslashes($_POST['somecontent']); // Let's make sure the file exists and is writable first. if (is_writable($filename)) { // In our example we're opening $filename in append mode. // The file pointer is at the bottom of the file hence // that's where $somecontent will go when we fwrite() it. if (!$handle = fopen($filename, 'w')) { echo "Cannot open file ($filename)"; exit; } // Write $somecontent to our opened fi<form action="" method="get"></form>le. if (fwrite($handle, $somecontent) === FALSE) { echo "Cannot write to file ($filename)"; exit; } echo "Success, wrote ($somecontent) to file ($filename) <a href=".$_SERVER['PHP_SELF']."> - Continue - "; fclose($handle); } else { echo "The file $filename is not writable"; } } else { // get contents of a file into a string $handle = fopen($filename, 'r'); $somecontent = fread($handle, filesize($filename)); ?> <h1>Edit file <? echo $filename ;?></h1> <form name="form1" method="post" action=""> <p> <textarea name="somecontent" cols="80" rows="10"><? echo $somecontent ;?></textarea> </p> <p> <input type="submit" name="Submit" value="Submit"> </p> </form> <? fclose($handle); } ?>

    Read the article

  • Returning different data types C#

    - by user1810659
    i have create a class library (DLL) with many different methods. and the return different types of data(string string[] double double[]). Therefore i have created one class i called CustomDataType for all the methods containing different data types so each method in the Library can return object of the custom class and this way be able to return multiple data types I have done it like this: public class CustomDataType { public double Value; public string Timestamp; public string Description; public string Unit; // special for GetparamterInfo public string OpcItemUrl; public string Source; public double Gain; public double Offset; public string ParameterName; public int ParameterID; public double[] arrayOfValue; public string[] arrayOfTimestamp; // public string[] arrayOfParameterName; public string[] arrayOfUnit; public string[] arrayOfDescription; public int[] arrayOfParameterID; public string[] arrayOfItemUrl; public string[] arrayOfSource; public string[] arrayOfModBusRegister; public string[] arrayOfGain; public string[] arrayOfOffset; } The Library contains methods like these: public CustomDataType GetDeviceParameters(string deviceName) { ...................... code getDeviceParametersObj.arrayOfParameterName; return getDeviceParametersObj; } public CustomDataType GetMaxMin(string parameterName, string period, string maxMin) { .....................................code getMaxMingObj.Value = (double)reader["MaxMinValue"]; getMaxMingObj.Timestamp = reader["MeasurementDateTime"].ToString(); getMaxMingObj.Unit = reader["Unit"].ToString(); getMaxMingObj.Description = reader["Description"].ToString(); return getMaxMingObj; } public CustomDataType GetSelectedMaxMinData(string[] parameterName, string period, string mode) {................................code selectedMaxMinObj.arrayOfValue = MaxMinvalueList.ToArray(); selectedMaxMinObj.arrayOfTimestamp = MaxMintimeStampList.ToArray(); selectedMaxMinObj.arrayOfDescription = MaxMindescriptionList.ToArray(); selectedMaxMinObj.arrayOfUnit = MaxMinunitList.ToArray(); return selectedMaxMinObj; } As illustrated thi different methods returns different data types,and it works fine for me but when i import the DLL and want to use the methods Visual studio shwos all the data types in the CustomDataType class as suggestion for all the methods even though the return different data.This is illusrtated in the picture below. As we can see from the picture with the suggestion of all the different return data the user can get confused and choose wrong return data for some of the methods. So my question is how can i improve this. so Visual studio suggest just the belonging return data type for each method.

    Read the article

  • RequestFactoryEditorDriver getting edited data after flush

    - by Deanna
    Let me start with I have a solution, but I don't really think it is elegant. So, I am looking for a cleaner way to do this. I have an EntityProxy displayed in a view panel. The view panel is a RequestFactoryEditorDriver only using display mode. The user clicks on a data element and opens a popup editor to edit a data element of the EntityProxy with a few more bits of data than is displayed in the view panel. When the user saves the element I need the view panel to update the display. I ran into a problem because the RequestFactoryEditorDriver of the popup editor flow doesn't let you get to the edited data. The driver uses the passed in context and sends it to the server. The context returned out of flush only allows a Receiver even if you cast it to the type of context you stored in the editor driver in the edit() call. It doesn't appear to send and EntityProxyChanged event either, so I couldn't listen for that and update the display view. The solution I found was to change my domain object persist to return the newly saved entity. Then create the popup editor like this editor.getSaveButtonClickHandler().addClickHandler(createSaveHandler(driver, editor)); // initialize the Driver and edit the given text. driver.initialize(rf, editor); PlayerProfileCtx ctx = rf.playerProfile(); ctx.persist().using(playerProfile).with(driver.getPaths()) .to(new Receiver<PlayerProfileProxy>(){ @Override public void onSuccess(PlayerProfileProxy profile) { editor.hide(); playerProfile = profile; viewDriver.display(playerProfile); } }); driver.edit(playerProfile, ctx); editor.centerAndShow(); Then in the save handler I just fire the context I get from the flush. While this approach works, it doesn't seem right. It would seem I should subscribe to the entitychanged event in the display view and update the entity and the view from there. Also this approach saves the complete entity, not just the changed bits, which will increase bandwidth usage. What I would think should happen, is when you flush the entity it should 'optimistically' update the rf managed version of the entity and fire the entity proxy changed event. Only reverting the entity if something went wrong in the save. The actual save should only send the changed bits. In this way there isn't a need to refetch the whole entity and send that complete data over the wire twice. Is there a better solution?

    Read the article

  • CookieContainer bug?

    - by Salar
    I'm confused how CookieContainer handles domain, so I create this test. This test shows cookieContainer doesn't return any cookie for "site.com" but according to RFC it should return at least 2 cookies. Isn't it a bug? How make it to work? Here is a discussion about this bug: http://social.msdn.microsoft.com/Forums/en-US/ncl/thread/c4edc965-2dc2-4724-8f08-68815cf1dce6 <%@ Page Language="C#" %> <%@ Import Namespace="System.Net" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <script runat="server"> CookieContainer getContainer() { CookieContainer result = new CookieContainer(); Uri uri = new Uri("http://sub.site.com"); string cookieH = @"Test1=val; domain=sub.site.com; path=/"; result.SetCookies(uri, cookieH); cookieH = @"Test2=val; domain=.site.com; path=/"; result.SetCookies(uri, cookieH); cookieH = @"Test3=val; domain=site.com; path=/"; result.SetCookies(uri, cookieH); return result; } void Test() { CookieContainer cookie = getContainer(); lblResult.Text += "<br>Total cookies count: " + cookie.Count + " &nbsp;&nbsp; expected: 3"; Uri uri = new Uri("http://sub.site.com"); CookieCollection coll = cookie.GetCookies(uri); lblResult.Text += "<br>For " + uri + " Cookie count: " + coll.Count + " &nbsp;&nbsp; expected: 2"; uri = new Uri("http://other.site.com"); coll = cookie.GetCookies(uri); lblResult.Text += "<br>For " + uri + " Cookie count: " + coll.Count + " &nbsp;&nbsp; expected: 2"; uri = new Uri("http://site.com"); coll = cookie.GetCookies(uri); lblResult.Text += "<br>For " + uri + " Cookie count: " + coll.Count + " &nbsp;&nbsp; expected: 2"; } protected void Page_Load(object sender, EventArgs e) { Test(); } </script> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title>CookieContainer Test Page</title> </head> <body> <form id="frmTest" runat="server"> <asp:Label ID="lblResult" EnableViewState="false" runat="server"></asp:Label> </form> </body> </html>

    Read the article

  • PHP Session / Array Problem accesing

    - by Chris
    Hello, I have a form that certain data, which then gets calculated and gets displayed in a table. All the data gets saved in a 2 dimensional array. Every time i go back to the form the new data gets saved in the array. That data will be displayed in the next table row and so on. I have used print_r($_Session) and everything gets properly saved in the array. Although i have no idea how to acces the session variables area, floor, phone, network etc wich are now in the array. Without arrays i stored them in a variable for example $phone , and did calculations with it. But now when i use the arrays, i keep on getting undefined index phone etc... How can i acces these variables, been looking at this for hours without getting any closer to a solution. Any help much appreciated. Regards. First page: if (empty ($ _POST)) ( Mode = $ name $ _POST ['state name']; $ Area = $ _POST ['size']; $ Floor = isset ($ _POST ['floor'])? $ _POST ['Floor'] 0, / / if checkbox checked value 1 else 0 $ Phone = isset ($ _POST ['phone'])? $ _POST ['Phone']: 0; $ Network = isset ($ _POST ['network'])? $ _POST ['Network']: 0; / / Control surface if (is_numeric ($ area)) / / OK ( if (isset ($ _SESSION ['table'])) ( / / Create a new row to the existing session table $ Table = $ _SESSION ['table']; $ Number = count ($ table); $ Table [$ count] [0] = $ file name; $ Table [$ count] [1] = $ size; $ Table [$ count] [2] = $ floor; $ Table [$ count] [3] = $ phone; $ Table [$ count] [4] = $ network; $ _SESSION ['Table'] = $ table; ) else ( / / Create the session table $ Table [0] [0] = $ file name; $ Table [0] [1] = $ size; $ Table [0] [2] = $ floor; $ Table [0] [3] = $ phone; $ Table [0], [4] $ = network; $ _SESSION ['Table'] = $ table; ) header ("Location: ExpoOverzicht.php"); ) else ( echo "<h1> surface Wrong - New try </ h1>"; ) ) When i made the php code withotu the arrays i declared like this, and it worked fine. But now there in the array, and i have no idea how to "acces them" $standnaam = $_SESSION["standnaam"]; $oppervlakte = $_SESSION["oppervlakte"]; $verdieping = $_SESSION["verdieping"]; $telefoon = $_SESSION["telefoon"]; $netwerk = $_SESSION["netwerk"];

    Read the article

< Previous Page | 581 582 583 584 585 586 587 588 589 590 591 592  | Next Page >