Search Results

Search found 18209 results on 729 pages for 'loop device'.

Page 590/729 | < Previous Page | 586 587 588 589 590 591 592 593 594 595 596 597  | Next Page >

• Why does the wireless network icon have a red X over it when everything seems to work?

  - by Kristo

  I booted my almost brand new laptop running Windows 7 this morning and noticed a red X through the wireless networking icon in the system tray. At first I thought something was wrong, but clicking on it shows a good connection to my wireless network. I had no problem getting here to post this question. I'm very new to Windows 7 so I have no idea how to troubleshoot this myself. Is there an actual problem here? Can I fix the icon so it doesn't falsely display an error (I assume that's what the red X means)? Here's what I know: I can get here to post this question. There's at least one unsecured network available that I'm not connected to. I can see a bunch of wireless networks, presumably from my neighbors' houses. There are no other computers turned on in my house right now. The device manager shows no problems with any devices. I can ping my default gateway, DNS, and yahoo.com with no problem.

  Read the article

• Last step in HDD Recovery (fixing windows)

  - by Atom Computing

  My dad’s hard drive corrupted which was a result of many bad sectors. Anyway, I made a clone of the drive and have now repaired it totally (recreating the MBR and MFT) and doing a series of ChkDsk's on it. I can now see all the files and folder on it and it is all intact. I currently have it as a slave in my computer (where I was doing all the repairs). When putting it back into the computer, it comes up with "A disk read error occurred: Press Ctrl + Alt + Del to Restart". I don’t know why this is happening but think it might have something to do with file permissions. I have tried a start-up recovery on the Vista boot CD and it found no problems. When trying to apply file permissions (and creating file perms for the SYSTEM group (as it didn’t have any for SYSTEM group)) it couldn't apply them for some of the System32 folder files. I have tried applying them as admin and with as powerful privileges I can get. All to no avail. When it is in my PC I can boot it up (I added it into my bootloader) and it boots up fine except when it logs in it comes up with the error - "Rundll32.exe - Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item" This message keeps coming back and nothing loads at all. Any help would be greatly received as I have got so far with the data recovery and want to avoid a reformat at all costs due to the vast number of programs installed and I don’t have much time on my hands! Thanks

  Read the article

• Tuning Linux + HAProxy

  - by react

  I'm currently rolling out HAProxy on Centos 6 which will send requests to some Apache HTTPD servers and I'm having issues with performance. I've spent the last couple of days googling and still can't seem to get past 10k/sec connections consistently when benchmarking (sometimes I do get 30k/sec though). I've pinned the IRQ's of the TX/RX queues for both the internal and external NICS to separate CPU cores and made sure HAProxy is pinned to it's own core. I've also made the following adjustments to sysctl.conf: # Max open file descriptors fs.file-max = 331287 # TCP Tuning net.ipv4.tcp_tw_reuse = 1 net.ipv4.ip_local_port_range = 1024 65023 net.ipv4.tcp_max_syn_backlog = 10240 net.ipv4.tcp_max_tw_buckets = 400000 net.ipv4.tcp_max_orphans = 60000 net.ipv4.tcp_synack_retries = 3 net.core.somaxconn = 40000 net.ipv4.tcp_rmem = 4096 8192 16384 net.ipv4.tcp_wmem = 4096 8192 16384 net.ipv4.tcp_mem = 65536 98304 131072 net.core.netdev_max_backlog = 40000 net.ipv4.tcp_tw_reuse = 1 If I use AB to hit the a webserver directly I easily get 30k/s connections. If I stop the webservers and use AB to hit HAProxy then I get 30k/s connections but obviously it's useless. I've also disabled iptables for now since I read that nf_conntrack can slow everything down, no change. I've also disabled the irqbalance service. The fact that I can hit each individual device with 30k/s makes me believe the tuning of the servers is OK and that it must be some HAProxy config? Here's the config which I've built from reading tuning articles, etc http://pastebin.com/zsCyAtgU The server is a dual Xeon CPU E5-2620 (6 cores) with 32GB of RAM. Running Centos 6.2 x64. The private and public interfaces are on separate NICS. Anyone have any ideas? Thanks.

  Read the article

• Problems reviving old pc including graphics card issue.

  - by Mick

  I have a PC that seemed to have died years ago that I am trying to revive. It has a dual core athlon processor and a gigabyte motherboard. It had two dual output graphics cards, and I have long since forgotten which output would print out the diagnostic information as the PC starts up. Also I suspect that the resolution set on all the monitors was probably higher than my current single monitor is capable of displaying. The motherboard also has a built in graphics card, so I thought it may be simplest to remove both the graphics cards and plug my monitor into the onboard graphics just while I get things going. Does that seem sensible? Now the other problem: The PC has two hard drives. I have no idea which one is the primary one it is attempting to boot from. When I power up, the fan comes on and I hear some chuga-chuga-pause chuga-chuga-pause repeat indefinitely. I'm not sure which device is making the noise. There are no-beeps at any time. I see nothing on the screen at any time, not even for a second. Any suggestions? EDIT: If T start up the PC without the power connected to the CDrom there is no chuga-chugan noise.

  Read the article

• Volume is no longer showing in Raid Controller BIOS and in Windows

  - by Gordon

  Hi all, I have installed some critical Windows Updates yesterday and now my external RAID Volume no longer shows in Windows Vista x64. All updates went through successfully. From their description, I cannot see how they should relate to the issue, but this is the only change that happened, so who knows. Anyway, here is the details: I have an external eSata enclosure that is running on a SiI4726 controller. I can connect to the controller with it's management utility from the computer the enclosure is connected to. The three drives in the enclosure show up as JBODs. I had those drives configured to be one logical RAID5 drive. RAID management is done through a SiI3132 SoftRaid controller. The Raid Management Utility just shows empty channels where it usually shows the Raid Group. In the Windows Disk Manager, I can see an unknown unitialized device. This is fine according to the setup manual. What it doesn't show is my Raid drive. It's gone. Also, when booting Windows, the BIOS of the controller used to show the RAID volume before booting the OS. This is not happening anymore. Updating drivers and firmware did not help. I have made sure the drivers and firmware are compatible to each others. And like I said, it used to work before. Any clues?

  Read the article

• vmware player won't run on CentOS due to missing /dev/vmmon, what could be the problem?

  - by Graphics Noob

  So I've tried installing vmware player 3.1.4 and 3.1.3 and both times had the same problem, when I try to load a VM I get the error "Could not open /dev/vmmon". When I ls /dev/ I can see there is no "vmmon" device present. When I try running: sudo /etc/init.d/vmware start I get the output: Starting VMware services: VMware USB Arbitrator [ OK ] Virtual machine monitor [FAILED] Virtual machine communication interface [ OK ] VM communication interface socket family [ OK ] Blocking file system [ OK ] Virtual ethernet [FAILED] which shows that the Virtual Machine Monitor fails to load. I tried following the advice on this site and ran vmware-modconfig --console --install-all I notice during the compilation there are no errors, but at the end I get the message: Starting VMware services: VMware USB Arbitrator [ OK ] Virtual machine monitor [FAILED] Virtual machine communication interface [ OK ] VM communication interface socket family [ OK ] Blocking file system [ OK ] Virtual ethernet [ OK ] Unable to start services Out of curiousity I tried: sudo /sbin/insmod /lib/modules/2.6.18-238.9.1.el5xen/misc/vmmod.ko But got the error message: insmod: error inserting 'vmmon.ko': -1 Invalid module format I have a feeling this may be the root of the problem, but I don't know what could be causing it or how to fix it.

  Read the article

• Bridging networks problems

  - by Eric

  In my setup I have 3 computers and 2 (wireless d-link) routers. Computer1 has ethernet and wireless interfaces ethernet : 192.168.0.x (DHCP) wireless : 192.168.10.254 (static) Computer 2 has ethernet with two ips ethernet1 : 192.168.0.90 (static) ethernet2 : 192.168.10.110 (static) Computer 3 is a particular device with a hardcoded ip that I can't change wireless : 192.168.10.41 (static) Router1 manages internet and DHCP for network 192.168.0.0/24 Router2 is more complicated. I don't use DHCP. I use it to bridge between both networks. Its static ip is 192.168.10.1 Computer1 can ping Computer2. Computer1 can ping Computer3. Computer1 can ping Router1. Computer1 cannot ping Router2. Computer2 cannot ping Computer3. Computer2 can ping Router2. Router1 can ping Router1 Router2 can ping Computer2 Router2 cannot ping Computer1 Router2 cannot ping Computer3 This is very weird. Router2 manages the wireless connection, it should be able to ping its own computers right? My question is obviously : How can I make it so Computer2 can access everything else. This is a traditional case of "it was working before christmas and now it doesn't". The ethernet wiring is as follow : [ Computer1 ]----[ Router1 ]---[ Router2 ]---[ Computer3 ] I am using switch (lan) ports on Router1/2.

  Read the article

• Input/output error reading USB backup drive on CentOS 6.4

  - by Kev

  I'm suddenly seeing some strange behaviour on our USB backup drive that doesn't make sense to me: (2013-10-21 14:58:23 [root@newdc /]$ cd /mnt/backup/ (2013-10-21 14:59:03 [root@newdc backup]$ ls -la ls: reading directory .: Input/output error total 0 (2013-10-21 14:59:05 [root@newdc backup]$ df -h /mnt/backup Filesystem Size Used Avail Use% Mounted on /dev/sda1 917G 843G 28G 97% /mnt/backup How is it possible for the OS to know how much is in use, but I can't ls any of it as root? Or more to the point, what problem does this indicate? /var/log/messages said this: Oct 21 14:57:54 g5 kernel: EXT4-fs error (device sda1): ext4_journal_start_sb: Detected aborted journal Oct 21 14:57:54 g5 kernel: EXT4-fs (sda1): Remounting filesystem read-only But...read-only is something different than 'throw an io error'... After unmounting to try fsck on it, I had someone on-site look at it, and the drive was not spun up, and had a slow-flashing light, which I believe means it was in a power-suspend mode. So I had them unplug and replug the USB cable, and now (before remounting) it says: fsck from util-linux-ng 2.17.2 e2fsck 1.41.12 (17-May-2010) /dev/sda1: clean, 2805106/61046784 files, 181934167/244182016 blocks I then mount it and now ls works and df reports: Filesystem Size Used Avail Use% Mounted on /dev/sda1 917G 680G 191G 79% /mnt/backup What would cause it to go into such a state without being asked to? Why all the weird behaviour, and now it appears to not be corrupt?

  Read the article

• How do I find the Serial Number of a USB Drive?

  - by jamuraa

  I'm trying to re-enable USB Autoplay in a secure way, by installing a program on each of the computers that I use so that I can run my launcher (PStart in this case) whenever I plug in my specific USB drive. The tool that I'm using to enable this - AutoRunGuard - needs the serial number of the USB drive that I am using. I can't figure out where to find this in Windows. Ideally I would not need to install and run a separate program to do this (seemingly) simple task. Since this is a pretty easy question, bonus points if you also tell me how to discover it in Linux as well. What steps do I need to take to retrieve a USB Drive's serial number? UPDATE: Just incase people come here looking for the answer for AutoRunGuard, I discovered that they don't want the USB device serial number, but the volume serial number. The drive serial can be found by going into the command line, navigating to the drive, and executing dir. The volume serial number is found in the top two lines - use it without the dash.

  Read the article

• Recovery disk Windows 8 HP Pavilion g6

  - by fpghost

  I recently purchased a HP Pavilion g6 laptop running Windows 8. I want to either obtain the Windows 8 ISO or make some kind of recovery disk that would allow me to restore the system if things go wrong. The HP Pavilion comes with the 'HP Recovery Manager' which I thought may do the job, but on running it and putting in a DVD-R as requested it seems to just hang for a number of hours without doing a thing (the disk sounds like it's spinning for a few minutes but then goes silent). I then tried 'recdisc.exe' but I get the error System Repair could not be created The device reported unexpected or invalid data for a command. (0xC0AA02FF) Next I obtained my Windows 8 product key using the software ProduKey thinking this would allow me to go to the Microsoft website and download the Windows 8 ISO, but as far as I can tell all that is available is the upgrade which can be used if one is running something like Windows 7. Can anyone advise? EDIT: after a reboot recdisc.exe did work; I think the problem was due to some Windows updates needing a reboot, but never the less I would like a full Windows 8 ISO if possible.

  Read the article

• Terminal Server CPU usage at 100%

  - by Light1c3

  I'm running a terminal server with around 50-60 users,and every so often the server will go from 40% usage to 100%. I took a closer look an it seems every time this happens, a different user or two seem to be caught in a loop and end up using < 30% where the rest of the users only use a maximum of 5%. The company behind the software we use clame it's due to the servers inadequate hardware (It's a VM system running on a dual - quad core setup) which to me sounds like BS! I'm fairly new to this level of IT so if I misspoke I apologize. I have no way to prove it but I believe adding more raw hardware power wont do me any good as this to me seems like a bug in their software, and it will suck up as much ( or little) CPU as it's given. The VM in question has 4 vCPU cores and 12 GB RAM available, and is running Windows Server 2008, 64-bit Thanks in advance for your help! Note: I have the same question posted on SO, but was pointed in this direction so just in case, here is a link to the post http://stackoverflow.com/questions/17276602/termserver-cpu-at-100

  Read the article

• Windows 7 not booting after failed SRT (SSD caching) install

  - by david

  This is a fairly new computer, only about a month old. i7 2700k, z68 motherboard, with a 1.5tb WD black HD, and a 128gb crucial M4 ssd. I followed the instructions for setting up ssd caching, the SATA controller was set to RAID, I installed the intel software and enabled acceleration and it said everything went fine. But when I went to reboot, I received the lovely "Reboot and Select proper Boot device" error message. I checked the bios, and it was booting from the correct HD (I tried the only other option anyway just in case, it was the ~50 odd gb of unformatted space left on the SSD) AFter that I entered the raid until (ctrl-i at boot) and removed the acceleration and deleted the raid array (because it was being used as a cache this was non destructive) Still no boot. So I reinstalled win7 directly on the SSD, booted, and checked the HDD to make sure it hadn't been wiped. It hadn't, all the files were still there, including all the windows stuff. I backed up my data to an external drive just in case, but I'd really like to get this install booting again. I trawled the webs a bit, and have tried entering recovery mode and using the bootrec.exe and bootsect.exe to fix it, but to be honest I'm not sure what I'm doing with those. My question is basically: How do I make my harddrive bootable again?

  Read the article

• Is my motherboard failing, or is there some other issue?

  - by ThatGuy

  So, several months ago I put together my own desktop PC. I set up a dual boot to Windows and Ubuntu. Recently, without changing any settings or installing anything new, the wifi stopped working on windows (I use a wifi adapter). It said it was connected, Network settings showed that it was working and running trouble shooting had no results. My internet still works on any other device. I found that removing the adapter from the motherboard and plugging it back in was the only thing that fixed the problem. Reinstalling the wifi drivers did not help. I purchased a new Wifi adapter, but the problem persists. More recently, I had a much more discouraging development. Sometimes, turning on the computer results in a boot loop: BIOS never starts. Instead, the monitor turns on as if it got a signal, then immediately turns off. This loops on it's own indefinitely until I hold down power, hard reset it, and try again. Sometimes it works, sometimes it doesn't. I haven't tested much on the Ubuntu side. It appears that wifi works at least some of the time, but since I've had issues just getting to BIOS I'm not confident the issue is on the software side. I've also noticed issues with some of the USB ports no longer working, but that seems to be off and on. Finally, as of a few minutes ago, I booted to windows to discover that everything was running very slowly. Slow here is a relative word, but I have a Samsung 840 pro SSD and I'm used to applications running nigh instantly, and it was a solid 3 minutes before any of my applications would load. Anyway, my question is this: Is it likely that my motherboard is failing? Either way, what steps can I take to try and pin down the problem and figure out what to do?

  Read the article

• How do I setup routing for two companies with different Internet connections on the same LAN?

  - by Clint Miller

  Here's the setup: Two companies (A & B) share office space and a LAN. A 2nd ISP is brought in and company A wants its own Internet connection (ISP A) and company B wants its own Internet connection (ISP B). VLANs are deployed internally to separate the two companies' networks (company A: VLAN 1, company B: VLAN 2, shared VOIP: VLAN 3). With separate VLANs it's simple enough to use separate DHCP servers (or separate scopes on the same server) to assign the default gateway to each company's gateway for their Internet connection. Static routes can be created on each gateway to point traffic destined for the other company's VLAN or the voice VLAN so that all nodes are reachable as expected. However, I think this is a form of asymmetrical routing, right? (The path from node A1 to node B1 is not the same as the path back from node B1 to node A1). Can I set up policy-based routing to correct this? In that case, can I assign the same default gateway to every device on all VLANs and create a routing policy on a L3 switch to look at the source address and forward traffic to the appropriate next hop? In that case, I want the routing logic to go like this: If the destination address is known, forward the traffic (traffic destined for a different VLAN). If the destination address is unknown, forward the traffic to ISP A's gateway if the source address is on VLAN A; or forward the traffic to ISP B's gateway if the source address is VLAN B. Am I thinking about this problem in the correct way? Is there another way to solve this problem that I am overlooking?

  Read the article

• Why won't Google Chrome open Google Docs, and why is it slow with GMail?

  - by Philip

  OSX 10.6 Snow Leopard: Google Chrome works like a charm most of the time. I have many extensions installed, and I've tried disabling/re-enabling them one by one to find a culprit, with no luck. Here are the problems: (1) Chrome is slow to load GMail. I am fairly sure that clearing the cache alleviates this problem. But I can open Safari, type in the URL, and login to GMail in the time it sometimes takes Chrome to open the page. Shouldn't caching help the page load?!? And sometimes even after recent cache clears it still is slow to load..... Thoughts? (2) Chrome won't open Google Docs at all. Safari does. Again, I tried disabling extensions one-by-one, and I allow cookies and even third-party cookies. But I still am told it has a redirect loop. Any help would be much appreciated. Thanks!

  Read the article

• Laptop freezing every few seconds, including screen + sound

  - by zenstealth

  Just a few days ago, my Windows 7 HP dv4170us (1.76Ghz CPU, 1GB Ram) laptop started to freeze every other second where everything on screen and and sound (such as a song playing in iTunes) would just freeze until I bash it violently (without actually breaking the laptop) or wait for a couple of more seconds. I think it started one night when I noticed that a USB mouse of mine stopped working, and it displayed random "Device was not recognized" errors. I just unplugged the mouse and ignored it. Skip forward to the next day, is started freezing, and as of today I can't get my computer to not keep freezing. I tried to backup my files onto an external hdd, but it almost corrupted the drive. I ran 4 complete virus scans using MSSE and MalwareBytes (both quick and full scans), and they all came up clean. In the Task manager, the CPU usage is on a constant max, and so is the RAM (if I have just a few apps running, I only have like 30Mb of free RAM left). Also, on the outside of my laptop, right above where the CPU is located, it's very, very hot. I suspect that something is wrong internally within inside of the computer, but I'm not sure. It also does the same thing when booted into Ubuntu.Does anyone know what could be wrong with it?

  Read the article

• Is my "Generic" USB Flash Drive broken?

  - by Jesse J.

  So here is the situation. I find myself technological knowledgeable about many things ( I love to code, whether it's websites, C#, C++ or so on). However: My 2 toddlers (my wife actually) bought me a "Generic" 128 GB USB Storage Device (Usb Flash Drive) for Father's Day. I thought awesome at first..... WRONG! Nothing but problems with it. 3-4mb/s MAX transfer speed. I can bear with it. BUT! When I went to reformat my computer I transferred my save files from my games over to the stick and then the USB Stick managed to become corrupted. Not just a simple format would work either. It's screwed. I tried to use (Manually changed usb drive letter troubleshooting it to X) "chmod X: /X /F /R" with administrator rights, I did this after a long session to make it work with no errors (had to delete the log) and I finally recovered the files, however when I go to use it (transfer to or from) it transfers a couple kb to the stick or from it and then freezes, It says (Windows 7): Name: From: Folder (X:\File\Location) To: Folder C:\Users\Username\Desktop) Items Remaining: 0 (0 bytes) Speed: 0 bytes/second It does this forever... and ever... and ever... It transfered 3 files atleast, and then stopped. This is a new USB Stick bought from a "High" reputation company on eBay. Is the USB Stick screwed?

  Read the article

• Are there tools available for trimming PDF margins?

  - by Charles Duffy

  I have an ebook I'm trying to read in PDF format on a Kindle. Unfortunately, the page headers and footers have some content (page number and copyright info, respectively) preventing the device from scaling the actual text to match its usable area viewing area, thus leaving the actual content too small to read. Various tools are available which will trim off whitespace, but the Kindle already does this; my goal, by contrast, is to remove printed matter outside of a defined bounding box, and the only tool I've found for the purpose is moderately expensive commercial software. I could probably generate a mask in Inkscape; split out the individual pages using pdftk, apply the mask to each page individually (outputting to postscript), and recombine the numerous postscript files into a single PDF. However, this decode/reencode steps would be pretty unfortunate in terms of document size; something able to operate with a bit more finesse would be ideal. I have all major operating systems handy (Windows, several modern Linux distros, a Mac, etc) so solutions don't need to be constrained by platform. Suggestions? (I've reported the issue to the author, who mentioned it to his editor, who hasn't done anything about the issue over the course of more than a month, making the zero-work approach evidently nonproductive).

  Read the article

• Moving from 1 Linux Partition to Many over USB Mount

  - by Mistiry

  We have devices which use Compact Flash for storage. They work OK, but we recently got industrial-grade CF cards to start using. One of the major problems we get is corruption on the flash card. As it is now, these flash cards run Debian with everything in a single partition. We want to have multiple partitions on the new industrial CF cards to help avoid some of the corruption problems. I booted up the device, and attached a USB CF reader. I then used fdisk to partition the CF card in the USB reader. How can I move the data to these partitions so that it works? I have a partition for each of these directories: /lib /var /root /boot /tmp /home /etc / swap space I imagine I can't just use rsync - do I need to attach a second CF reader with a copy of the CF card, so that it's not active and in-use - and then copy from the first reader to the second? How will the system know where to find its files? I know I'd have to change fstab, but that resides in /etc, which will be on a separate partition...how will it find the fstab file if it can't find /etc? And what about grub? I'm at a loss, perhaps its just because I'm under the weather, or I'm just missing a piece of logic here... Any help is greatly appreciated, this is somewhat urgent as our existing stock is nearing its end and we don't want to purchase anything but these industrial cards, but need to get it working with partitions.

  Read the article

• XBMC remote control key repeat

  - by Amigable Clark Kant

  Those who have used XBMC with a WiFi remote, such as an Android or iOS device with the official XBMC remotes, have probably seen this at one time or another: your remote stops working, when you press a key, that key is repeated very fast. Sometimes you can break the key repeat loop by pressing that same key again. Sometimes (as this particular morning) you can not. This problem has existed for literally years (it even occurs on the old XBOX only builds) but there seems to be no definite explanation as to what is causing it. I am asking for a workaround. (If you Google, you can find threads were people are ridiculed for bringing up this problem, which is one reason I ask here instead of on the official forums. Also the fact that this problem has persisted for so many years.) I am running, right now, XBMCBuntu Live Eden and the latest official iOS remote. Although, I have seen this problem on all combinations of remotes and XBMC versions I have tried over the years, which are many. (XBMC on Windows, Linux, OSX, remotes on Android and iOS.) Link to bug #136 for the Android remote. It's marked as "fixed" as of client version 636, but the problem is seen again in rev 730. Go figure. There is something fundamentally wrong with how keypresses are sent from the various remotes to XBMC, since this problem is seen across time, XBMC versions and iOS/Android.

  Read the article

• How can I generate filesystem images that are usable on many different virtualization systems?

  - by Mark Longair

  I have written a script that generates a root filesystem image (based on Debian lenny) suitable for User-Mode Linux. (Essentially this script creates a filesystem image, mounts it with a loop device, uses debootstrap to create a lenny install, sets up a static IP for TUN/TAP networking, adds public keys for login by SSH and installs a web application.) These filesystem images work pretty well with UML, but it would be nice to be able to generate similar images that people can use on alternative virtualization software, and I'm not familiar with these options at all. In particular, since the idea is to use this image as a standalone server for testing the web application, it's important that the networking works. I wonder if anyone can suggest what would be involved in customizing such root filesystem images such that they could be used with other virtualization software, such as VMware, Xen or as an Amazon EC2 instance? Two particular concerns are: If such systems don't use a raw filesystem image (e.g. they need headers with metadata or are compressed in some particular way) do there exist tools to convert between the different formats? I assume that in the filesystem, at least /etc/network/interfaces will have to be customized, but are more involved changes likely to be necessary? Many thanks for any suggestions...

  Read the article

• file read performance degrades as number of files increases

  - by bfallik-bamboom

  We're observing poor file read IO results that we'd like to better understand. We can use fio to write 100 files with a sustained aggregate throughput of ~700MB/s. When we switch the test to read instead of write, the aggregate throughput is only ~55MB/s. The drop seems related to the number of files since the throughput for read and write are comparable for a single file then diverge proportionally as we increase the number of files. The test server has 24 CPU cores, 48GB of memory, and is running CentOS 6.0. The disk hardware is a RAID 6 array with 12 disks and a Dell H800 controller. This device is partitioned with ext4 using the default settings. Increasing the readahead (using blockdev) improves the read throughput significantly but it still doesn't match write speed. For instance, increasing the readahead from 128KB to 1M improved the read throughput to ~145MB/s. Is this a known performance issue in our OS/disk/filesystem configuration? If so, how can we tell? If not, what tools or tests can we use to further isolate the issue? Thanks.

  Read the article

• Allow members of a group to be unlocked by a specific account on AD

  - by JohnLBevan

  Background I'm creating a service to allow support staff to enable their firecall accounts out of hours (i.e. if there's an issue in the night and we can't get hold of someone with admin rights, another member of the support team can enable their personal firecall account on AD, which has previously been setup with admin rights). This service also logs a reason for the change, alerts key people, and a bunch of other bits to ensure that this change of access is audited / so we can ensure these temporary admin rights are used in the proper way. To do this I need the service account which my service runs under to have permissions to enable users on active directory. Ideally I'd like to lock this down so that the service account can only enable/disable users in a particular AD security group. Question How do you grant access to an account to enable/disable users who are members of a particular security group in AD? Backup Question If it's not possible to do this by security group, is there a suitable alternative? i.e. could it be done by OU, or would it be best to write a script to loop through all members of the security group and update the permissions on the objects (firecall accounts) themselves? Thanks in advance. Additional Tags (I don't yet have access to create new tags here, so listing below to help with keyword searches until it can be tagged & this bit editted/removed) DSACLS, DSACLS.EXE, FIRECALL, ACCOUNT, SECURITY-GROUP

  Read the article

• Prevent rmdir -p from traversing above a certain directory

  - by thepurplepixel

  I hacked together this script to rsync some files over ssh. The --remove-source-files option of rsync seems to remove the files it transfers, which is what I want. However, I also want the directories those files are placed in to be gone as well. The current part of the find command, -exec rmdir -p {} ; tries to remove the parent directory (in this case, /srv/torrents), but fails because it doesn't have the right permissions. What I'd like to do is stop rmdir from traversing above the directory find is run in, or find another solution to get rid of all the empty folders. I've thought of using some kind of loop with find and running rmdir without the -p switch, but I thought it wouldn't work out. Essentially, is there an alternative way to remove all the empty directories under the parent directory? Thanks in advance! #!/bin/bash HOST='<hostname>' USER='<username>' DIR='<destination directory>' SOURCE='/srv/torrents/' rsync -e "ssh -l $USER" --remove-source-files -h -4 -r --stats -m --progress -i $SOURCE $HOST:$DIR find $SOURCE -mindepth 1 -type d -empty -prune -exec rmdir -p \{\} \;

  Read the article

• How do I connect to and factory reset a Catalyst 3560 Switch?

  - by Josh

  My company just bought another company. In their server room they had some older hardware, which I would like to repurpose. One of these is a Cisco Switch: C3560G-48TS-S. I found some instructions about this switch here but this is not a guide for a beginner. I have no idea how to connect to this thing to begin running the commands. It says Configure the PC terminal emulation software for 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control. But I can't find anything on how to do this (assuming with telnet?) or even what program to use. I also don't know how to find the IP address of the device to connect to it. My research also says once I get in there, I need to run clear config all Is this the right command? Also, what if I can't get the username and password for these devices? Is there some way to factory reset (my only experience is with devices that have a hardware reset button) EDIT: I should note that when I push the button on the front the three lights blink, which according to the documentation indicated the switch is configured and "not available for express setup"

  Read the article

< Previous Page | 586 587 588 589 590 591 592 593 594 595 596 597  | Next Page >