Search Results

Search found 16396 results on 656 pages for 'browser extensions'.

Page 591/656 | < Previous Page | 587 588 589 590 591 592 593 594 595 596 597 598  | Next Page >

• How do I produce a screenshot of a flash swf on the server?

  - by indignant

  I'm writing a flash app using the open source tools. I would like to load a data file in to the app and capture a screenshot of the stage on the server. The only part that seems mysterious is running the app on the server. In fact, I don't even care if it's the same app running on the server and in the browser--if I can use the flash stage and drawing routines to produce an image server-side, I'm happy. If I have to delve in to flex, fine. Right now I'm having problems finding any starting point at all. I gather Adobe has some commercial products that may fit the bill, but I'd like to stick with open source, apache, and linux. I know this is probably possible with haxe/neko, but I'd like to use more mainstream tools if possible. Am I asking too much? EDIT/CLARIFICATION: Many thanks for the responses so far, but I think I've been a bit muddy in my description. I've already written the actual stage-grabbing stuff using the same PNGEncoder class as was suggested. The problem is in actually running the swf on the server side. I don't want to let the client take the screen shot itself, because this opens up the possibility of the client maliciously submitting a screenshot which does not correspond to what is on the stage, that is, I don't want users uploading porn. If I could run the the actionscript code on the server, then I could generate the screenshot from my data files and be sure that the screenshot matches the data, but I have no idea how to run the actionscript or swf on the server.

  Read the article

• Jetty 7 will not allow me to customize a session cookie path

  - by Bob Obringer

  Using Jetty 7.0.2, I am unable to set a custom session cookie path. I am hosting multiple sites on the same server using apache to proxy requests to the proper context. (replaced http as htp as stackoverflow thinks my multiple links might be spam) <VirtualHost *:80> ServerName context.domain.com ProxyRequests On ProxyPreserveHost Off <Proxy *:80> Order deny,allow Allow from 127.0.0.1 </Proxy> ProxyPass / htp://localhost:8080/context/ ProxyPassReverse / htp://localhost:8080/context/ <Location /> Order allow,deny Allow from all </Location> </VirtualHost> Jetty is running on the same server on port 8080 and my context is available @ /context The user accesses the application @ htp://context.domain.com but jetty is setting the path for the session cookie @ /context. This prevents the browser from accessing the cookie since the the actual path to the context is not being used. I need to override Jetty's default setting to set the cookie for the context, and set the path at the root ( / ). In my Jetty's webdefault.xml I have the following, which is partially working: <context-param> <param-name>org.eclipse.jetty.servlet.SessionCookie</param-name> <param-value>CustomCookieName</param-value> </context-param> <context-param> <param-name>org.eclipse.jetty.servlet.SessionPath</param-name> <param-value>/</param-value> </context-param> The cookie is properly set with a custom name, but it is NOT setting the SessionPath. No matter what I set the value to... it refuses to set a cookie at any path but /context. This has been driving me crazy so any help would be greatly appreciated.

  Read the article

• Mysterious horizontal lines on my site when rendered on iPad

  - by Ferdy

  The following site: http://staging.jungledragon.com Has a few rendering issues on the iPad using Safari, so I'm trying to fix them. There is one issue where I am stuck though. If you have an iPad, open the site in portrait mode. There are two unwanted horizontal lines appearing, a top one that crosses the tabs (Popular, Fresh, etc) and a bottom one that sits right above the lizard illustration. Both lines should not be there. These lines do not appear on any other browser tested, including Safari on Windows. When you move that same site into landscape mode on the iPad, the top horizontal line dissapears, whilst the bottom one stays. If you zoom in a bit to the bottom line, it then dissapears too. I've been trying out various CSS fixes to no avail and am now beginning to think this is a rendering issue of Safari, although possibly triggered by me. Any help is greatly appreciated. It seems like a minor issue but I hate sloppiness.

  Read the article

• mod rewrite to remove facebook query string

  - by user905752

  I can't get my query string to work..please help... I have the following url: http://betatest.bracknell-forest.gov.uk/help?fb_action_ids=372043216205703&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582 (sorry but the page will be unavailable as it is a test internal domain link) I want the following url: http://betatest.bracknell-forest.gov.uk/help I get a browser message saying 'The system cannot find the file specified.' I know it is because I already have a mod rewrite to remove the .htm from the page name to return clean urls but I don't know what I need to do to accept a clean url and return the page. Here is the mod rewrite code I have: RewriteRule ^/([\w]+)$ /$1.htm [I,L] #Any bare URL will get rewritten to a URL with .htm appended RedirectRule ^/(.+)\.(htm)$ http://betatest.bracknell-forest.gov.uk/$1 [R=301] RewriteCond %{QUERY_STRING} ^fb_action_ids=(.)$ #if the query string contains fb_action_ids RewriteCond %{QUERY_STRING} !="" #if there is a query string RewriteRule ^(.*) $1? [R=301,L] I think it is because I am using R=301 twice but do not know what I need to use as an alternative. If I append .htm from help?fb_action_ids.... to help.htm?fb_action_ids.... this returns the required page fine but I need to return the page name for the non appended url. Many thanks for any help in advance.

  Read the article

• C# + Querying XML with LINQ

  - by user336786

  Hello, I'm learning to use LINQ. I have seen some videos online that have really impressed me. In an effort to learn LINQ myself, I decided to try to write a query to the NOAA web service. If you put "http://www.weather.gov/forecasts/xml/sample_products/browser_interface/ndfdBrowserClientByDay.php?zipCodeList=20001&format=24+hourly&startDate=2010-06-10&numDays=5" in your browser's address bar, you will see some XML. I have successfully retrieved that XML in a C# program. I am loading the XML into a LINQable entity by doing the following: string xml = QueryWeatherService(); XDocument weather = XDocument.Parse(xml); I have a class called DailyForecast defined as follows: public class DailyForecast { public float HighTemperature { get; set; } public float LowTemperature { get; set; } public float PrecipitationPossibility { get; set; } public string WeatherSummary { get; set; } } I'm trying write a LINQ query that adheres to the structure of my DailyForecast class. At this time, I've only gotten to this far: var results = from day in response.Descendants("parameters") select day; Not very far I know. Because of the structure of the XML returned, I'm not sure it is possible to solely use a LINQ query. I think the only way to do this is via a loop and traverse the XML. I'm seeking someone to correct me if I'm wrong. Can someone please tell me if I can get results using purely LINQ that adhere to the structure of the DailyForecast class? If so, how? Thank you!

  Read the article

• PHP/Javascript: Need help removing line break from code

  - by Josh K

  I am trying to get names from a .txt file. I am using file('filename.txt') but if i use a php for loop to try and trim the names, it comes out on multiple lines: This is the actual line that prints the javascript (NOTE: I am going to be putting these names into a select box, if you can fix the problem at hand the rest of the code should work so unless you a big problem with it you don't need to comment) <?php for($i=1; $i < 27; $i++){ echo "selbox.options[selbox.options.length] = new Option('".lines[$i]."','".$lines[$i]."');\n"; } ?> Heres how it comes out on the browser: selbox.options[selbox.options.length] = new Option('Djamal ABDOUN ','First1 Last1 '); selbox.options[selbox.options.length] = new Option('Chadli AMRI ','First2 Last2 '); I need those to be on one line so i dont get a unterminated string literal js error Any ideas on what i can do here? EDIT: Oh i should probably mention, the $lines var is initiated like this: $lines = file('filename.txt'); and inside that file i have formatted like this First1 Last1 First2 Last2 First3 Last3 etc. and i hit delete after each Last name until the next first name is touching, then hit enter to put it on a new line (Editor is notepad++)

  Read the article

• Webview shouldoverrideurlloading doesn't work

  - by Zak

  I have this code in my app: public class Home extends Activity{ @Override public void onCreate(Bundle savedInstanceState){ super.onCreate(savedInstanceState); setContentView(R.layout.home); final ProgressDialog progressBar; if(isOnline()){ WebView webView = (WebView) findViewById(R.id.home_web); webView.setBackgroundColor(Color.parseColor(getString(R.color.colore_bg))); webView.getSettings().setJavaScriptEnabled(true); webView.getSettings().setBuiltInZoomControls(true); webView.getSettings().setPluginsEnabled(true); webView.setWebViewClient(new MyWebViewClient()); progressBar = ProgressDialog.show(this,getString(R.string.caricamento),getString(R.string.attendere)); webView.setWebViewClient(new WebViewClient(){ public void onPageFinished(WebView view, String url) { if (progressBar.isShowing()) { progressBar.dismiss(); } } }); webView.loadUrl("http://www.mysite.com/android.php"); }else{ Toast.makeText(this,getString(R.string.no_connessione),Toast.LENGTH_LONG).show(); } } private class MyWebViewClient extends WebViewClient { @Override public boolean shouldOverrideUrlLoading(WebView view, String url) { System.out.println("here"); if (Uri.parse(url).getHost().equals("mysite.com")) { // This is my web site, so do not override; let my WebView load the page return false; } // Otherwise, the link is not for a page on my site, so launch another Activity that handles URLs Intent intent = new Intent(Intent.ACTION_VIEW, Uri.parse(url)); startActivity(intent); return true; } } public boolean isOnline(){ ConnectivityManager cm=(ConnectivityManager)getSystemService(Context.CONNECTIVITY_SERVICE); NetworkInfo ni = cm.getActiveNetworkInfo(); if(ni==null){ return false; } return ni.isConnected(); } } The shouldOverrideUrlLoading doesn't work, neither print the system.out, it seems to be never called. How can I repair this? I need to open all the link (except the main page www.mysite.com/iphone.php) in the default browser

  Read the article

• How to make Firefox extension auto install in nav bar?

  - by S M

  I'm working on a Firefox extension. I'd like to make it auto-install in the far right position on the nav bar when a user installs it. As it stands, a user has to go to View Toolbars Customize... and drag the extension to the nav bar once it's installed. I'd like to eliminate this step. The extension is here: http://madan.org/tickertool The XUL for my extension looks basically like this and it overlays browser.xul: <overlay id="my-ext-overlay" ... > <toolbarpalette id="BrowserToolbarPalette"> <toolbaritem id="my-ext-container" ... > <toolbarbutton id="my-ext-customize-image" ... /> <textbox id="my-ext-textbox" ... /> <hbox id="my-ext-buttons"> <image id="my-ext-button1" ... /> <image id="my-ext-button2" ... /> <image id="my-ext-button3" ... /> </hbox> </toolbaritem> </toolbarpalette> </overlay> I've seen code here ( https://developer.mozilla.org/en/Code_snippets/Toolbar ) that supposedly does what I'm looking for, but this code is if your extension is just a single button and I can't get it to work for me. The answer to my question is likely some modification of this code, but I haven't figured it out.

  Read the article

• Cannot connect to Github?

  - by user2973438

  so I tried to push some updates onto my repo on github via terminal on Mac OSX 10.8.4 and it doesn't work. I've been getting the same error many times: Lillys-MacBook-Air:Yuewei Lilly$ git push origin master error: Failed connect to github.com:443; Operation timed out while accessing https://github.com/lillybeans/Yuewei.git/info/refs?service=git-receive-pack fatal: HTTP request failed Some background: I've pushed many projects onto github before using terminal (when I was in Canada). I am currently in Shanghai, China, could it be the GFW? But when I was in Beijing, I was able to push projects onto github still. when I do ping github.com: Lillys-MacBook-Air:Yuewei Lilly$ ping github.com PING github.com (192.30.252.131): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 ping: sendto: No route to host Request timeout for icmp_seq 2 ping: sendto: Host is down Request timeout for icmp_seq 3 ping: sendto: Host is down Request timeout for icmp_seq 4 ping: sendto: Host is down Request timeout for icmp_seq 5 ping: sendto: Host is down Request timeout for icmp_seq 6 ping: sendto: Host is down Request timeout for icmp_seq 7 ^C --- github.com ping statistics --- 9 packets transmitted, 0 packets received, 100.0% packet loss Lillys-MacBook-Air:Yuewei Lilly$ I have ShadowSocks (proxy) turned on. Without it I can't access github.com via browser, with it, I can. also when I do "git remote -v" I see both my pull and push remote repos correctly listed. Thank you in advance!

  Read the article

• How to customize the printing while using Window.print ?

  - by Holicreature

  i want to print a invoice and i use a print.css by media=print and when i change the current stylesheet to print.css i could able to view what i should be printing without the titles and content left aligned. But still while i'm printing there is space in the top and left and its taking up whole a4 sheet and also the whole width of the page.. But i've defined a body width of just 550 px. While i view to print preview, it takes the whole width instead of taking up 1/3 of the width.. My print.css is body { width:550px; height:450px; color:#000000; margin:0; padding:0; word-spacing:1.1pt; font-family : "Times New Roman", Times, serif; font-size : 10px; text-align:left; } a { visibility :hidden; display : none; } input{ display : none; } table { margin: 1px; text-align:left; } #list,#head,#cont,#fotter,#oth,#links,#name,li,ul,ol { display : none; } I'm printing through browser using window.print, so is there any special configuration i need to do...?

  Read the article

• What can I do to get Mozilla Firefox to preload the eventual image result?

  - by Dalal

  I am attempting to preload images using JavaScript. I have declared an array as follows with image links from different places: var imageArray = new Array(); imageArray[0] = new Image(); imageArray[1] = new Image(); imageArray[2] = new Image(); imageArray[3] = new Image(); imageArray[0].src = "http://www.bollywoodhott.com/wp-content/uploads/2008/12/arjun-rampal.jpg"; imageArray[1].src = "http://labelleetleblog.files.wordpress.com/2009/06/josie-maran.jpg"; imageArray[2].src = "http://1.bp.blogspot.com/_22EXDJCJp3s/SxbIcZHTHTI/AAAAAAAAIXc/fkaDiOKjd-I/s400/black-male-model.jpg"; imageArray[3].src = "http://www.iill.net/wp-content/uploads/images/hot-chick.jpg"; The image fade and transformation effects that I am doing using this array work properly for the first 3 images, but for the last one, imageArray[3], the actual image data of the image does not get preloaded and it completely ruins the effect, since the actual image data loads AFTERWARDS, only at the time it needs to be displayed, it seems. This happens because the last link http://www.iill.net/wp-content/uploads/images/hot-chick.jpg is not a direct link to the image. If you go to that link, your browser will redirect you to the ACTUAL location. Now, my image preloading code in Chrome works perfectly well, and the effects look great. Because it seems that Chrome preloads the actual data - the EVENTUAL image that is to be shown. This means that in Chrome if I preloaded an image that will redirect to 'stop stealing my bandwidth', then the image that gets preloaded is 'stop stealing my bandwidth'. How can I modify my code to get Firefox to behave the same way?

  Read the article

• creating arrays in for loops.... without creating an endless loop that ruins my day!

  - by Peter

  Hey Guys, Im starting with a csv varible of column names. This is then exploded into an array, then counted and tossed into a for loop that is supposed to create another array. Every time I run it, it goes into this endless loop that just hammers away at my browser...until it dies. :( Here is the code.. $columns = 'id, name, phone, blood_type'; <code> $column_array = explode(',',$columns); $column_length = count($column_array); //loop through the column length, create post vars and set default for($i = 0; $i <= $column_length; $i++) { //create the array iSortCol_1 => $column_array[1]... $array[] = 'iSortCol_'.$i = $column_array[0]; } </code> What I would like to get out of all this is a new array that looks like so.. <code> $goal = array( "iSortCol_1" => "id", "iSortCol_2" => "name", "iSortCol_3" => "phone", "iSortCol_4" => "blood_type" ); </code>

  Read the article

• Mimic Coldfusion's debug output in PHP?

  - by TekiusFanatikus

  I'm trying to mimic Coldfusion's debug output in PHP. Here's an example of what it looks like (ie. Execution Time section): I've turned to XDebug. Ideally, the exception stack error output would be what I'd be looking for. However, it only shows up when an exception occurs. I also tried something like (in our CMS-ish app) this (original question here): $content.= "<?php xdebug_start_trace('e:/xdebug/trace');?>"; $content.= "<?php require('".$page['file_'.LG]."'); ?>"; $content.= "<?php xdebug_stop_trace();?>"; ... $content.= "<?php echo readfile('e:/xdebug/trace.xt');?>"; However, I get an insane, browser crashing HTML table dropped at the bottom of page. Not very efficient. My php.ini config: xdebug.trace_format = 2 xdebug.collect_vars = 1 xdebug.collect_params = 4 xdebug.dump_globals = 1 xdebug.dump.SERVER = 'REQUEST_URI' xdebug.show_local_vars = 1 xdebug.show_mem_delta = 1 I'm just wondering if someone has already done something similar?

  Read the article

• Idiomatic PHP web page creation

  - by GreenMatt

  My PHP experience is rather limited. I've just inherited some stuff that looks odd to me, and I'd like to know if this is a standard way to do things. The page which shows up in the browser location (e.g. www.example.com/example_page) has something like: <? $title = "Page Title"; $meta = "Some metadata"; require("pageheader.inc"); ?> <!-- Content --> Then pageheader.inc has stuff like: <? @$title = ($title) ? $title : ""; @$meta = ($meta) ? $meta : ""; ?> <html> <head> <title><?=$title?></title </head> <!-- and so forth --> Maybe others find this style useful, but it confuses me. I suppose this could be a step toward a rudimentary content management system, but the way it works here I'd think it adds to the processing the server has to do without reducing the load on the web developer enough to make it worth the effort. So, is this a normal way to create pages with PHP? Or should I pull all this in favor of a better approach? Also, I know that "<?" (vs. "<?php" ) is undesirable; I'm just reproducing what is in the code.

  Read the article

• Scripts fail when jQuery.js isn't cached. When cached, scripts run fine.

  - by Bob

  I have jQuery UI Tabs which load their content via AJAX. About once every 15 times when the entire page is loaded (not just XHR), things fail and I don't see the proper content in the tab. Fiddler showed me that when things fail I also see that jQuery.js and jQuery-ui.js are both sent to the browser in full (~100kB). Normally, a page load results in HTTP status code 304 for both of those files, they're not re-downloaded, and the page displays properly. When the status code is 200 and fresh copies of jQuery/UI are sent, things fail. I notice this most often in IE8, but that's because I use it for web development. I have seen it in Firefox, but for some reason I can't reproduce it now. Fiddler shows that the HTTP request asks for: GET /Scripts/jquery-1.3.2.min.js?_=1255309685187 HTTP/1.1 I can't figure out what the ?_=1255309685187 is for, but I'm guessing it's a token to indicate for how long the file should be cached. Since I can't reproduce the problem in Firefox right now, I don't know what Firebug says. Any insight would be appreciated. EDIT: This is with Visual Studio's development webserver.

  Read the article

• Getting the last User ID in Zend Framework

  - by Ryan Murphy

  Using MySQL query browser, I manually made a table called users and input some date in the fields. I set the primary key to id and set it to auto increment. There are 3 rows, the highest id is 3. I then made the following class in the method directory to call upon the data in the table etc. class Application_Model_DbTable_User extends Zend_Db_Table_Abstract { protected $_name = 'user'; public function getLatestUserId() { $id = $this->getAdapter()->lastInsertId(); return $id; } } In the controller I do the following which gets the value generated by the method and lets the view access it: $usersDbModel = new Application_Model_DbTable_User(); $lastUserId = $usersDbModel->getLatestUserId(); $this->view->lastUserId = $lastUserId; In the view I then echo it to display it to the user: echo $this->lastUserId; However, even though my last id in the users table is 3. It displays 0. I have also tried: public function getLatestUserId() { $sql = 'SELECT max(id) FROM user'; $query = $this->query($sql); $result = $query->fetchAll(); return $result; } But this just throws out a server error. What have I done wrong? Am I missing something? Is there another way of doing this?

  Read the article

• Pass a Message From Thread to Update UI

  - by Jay Dee

  Ive created a new thread for a file browser. The thread reads the contents of a directory. What I want to do is update the UI thread to draw a graphical representation of the files and folders. I know I can't update the UI from within a new thread so what I want to do is: whilst the file scanning thread iterates through a directories files and folders pass a file path string back to the UI thread. The handler in the UI thread then draws the graphical representation of the file passed back. public class New_Project extends Activity implements Runnable { private Handler handler = new Handler() { @Override public void handleMessage(Message msg) { Log.d("New Thread","Proccess Complete."); Intent intent = new Intent(); setResult(RESULT_OK, intent); finish(); } }; public void getFiles(){ //if (!XMLEFunctions.canReadExternal(this)) return; pd = ProgressDialog.show(this, "Reading Directory.", "Please Wait...", true, false); Log.d("New Thread","Called"); Thread thread = new Thread(this); thread.start(); } public void run() { Log.d("New Thread","Reading Files"); getFiles(); handler.sendEmptyMessage(0); } public void getFiles() { for (int i=0;i<=allFiles.length-1;i++){ //I WANT TO PASS THE FILE PATH BACK TU A HANDLER IN THE UI //SO IT CAN BE DRAWN. **passFilePathBackToBeDrawn(allFiles[i].toString());** } } }

  Read the article

• How to configure and run a fastcgi application using Lighthttpd...

  - by Airy

  Hi, i've installed Lighthttpd for windows and i'd created a simple program in c++ which uses fastcgi libraries. i'll post the code here... #include "fcgi_stdio.h" #include <stdlib.h> int count; void initialize(void) { count=0; } void main(void) { initialize(); while (FCGI_Accept() >= 0) { printf("Content-type: text/html\r\n" "\r\n" "<title>FastCGI Hello! (C, fcgi_stdio library)</title>" "<h1>FastCGI Hello! (C, fcgi_stdio library)</h1>" "Request number %d running on host <i>%s</i>\n", ++count, getenv("SERVER_HOSTNAME")); } } I've spawned the fastcgi application in lighthttpd using the below configuration in lightttpd-inc.conf fastcgi.server = ( ".exe" => ( "" => ( "bin-path" => "D:\tinycgi.exe", "port" => 8080, "min-procs" => 1, "max-procs" => 1 ) ) ) while sending a request using the browser the server is responding with this message in the console 2009-02-18 16:08:34: (mod_fastcgi.c.2494) unexpected end-of-file (perhaps the fa stcgi process died): pid: 0 socket: tcp:localhost:8080 2009-02-18 16:08:34: (mod_fastcgi.c.3325) response not received, request sent: 1 024 on socket: tcp:localhost:8080 for /new/tinycgi.exe , closing connection I think the fastcgi application is not spawned correctly. Thank you, Varun

  Read the article

• Mysql for update

  - by shantanuo

  MySQL supports "for update" keyword. Here is how I tested that it is working as expected. I opened 2 browser tabs and executed the following commands in one window. mysql> start transaction; Query OK, 0 rows affected (0.00 sec) mysql> select * from myxml where id = 2 for update; .... mysql> update myxml set id = 3 where id = 2 limit 1; Query OK, 1 row affected, 1 warning (0.00 sec) Rows matched: 1 Changed: 1 Warnings: 0 mysql> commit; Query OK, 0 rows affected (0.08 sec) In another window, I started the transaction and tried to take an update lock on the same record. mysql> start transaction; Query OK, 0 rows affected (0.00 sec) mysql> select * from myxml where id = 2 for update; Empty set (43.81 sec) As you can see from the above example, I could not select the record for 43 seconds as the transaction was being processed by another application in the Window No 1. Once the transaction was over, I got to select the record, but since the id 2 was changed to id 3 by the transaction that was executed first, no record was returned. My question is what are the disadvantages of using "for update" syntax? If I do not commit the transaction that is running in window 1 will the record be locked for-ever?

  Read the article

• Initializing Disqus comments in hidden element causes issue in FF 14.0.1

  - by Bazze

  This issue appears only in Firefox 14.0.1 (well I couldn't reproduce it in any other browser). If you put the code for Disqus comments inside an element that is hidden and wait until everything is fully loaded and then display the element using JavaScript, the comment box nor comments will show up. However if you resize the window, it'll show up immediately. It's working fine in latest version of Google Chrome and Safari though. What's causing this and how to fix it? Sample code to reproduce: <div id="test" style="display:none;"> <div id="disqus_thread"></div> <script type="text/javascript"> /* * * CONFIGURATION VARIABLES: EDIT BEFORE PASTING INTO YOUR WEBPAGE * * */ var disqus_shortname = 'onlinefunctions'; // required: replace example with your forum shortname /* * * DON'T EDIT BELOW THIS LINE * * */ (function() { var dsq = document.createElement('script'); dsq.type = 'text/javascript'; dsq.async = true; dsq.src = 'http://' + disqus_shortname + '.disqus.com/embed.js'; (document.getElementsByTagName('head')[0] || document.getElementsByTagName('body')[0]).appendChild(dsq); })(); </script> <noscript>Please enable JavaScript to view the <a href="http://disqus.com/?ref_noscript">comments powered by Disqus.</a></noscript> <a href="http://disqus.com" class="dsq-brlink">comments powered by <span class="logo-disqus">Disqus</span></a> </div> <a href="#" onclick="document.getElementById('test').style.display = 'block'">show</a> I could post a link to a live example but I'm not sure about the policy of posting links here on Stack Overflow.

  Read the article

• How to display video on html page in firefox

  - by Manish

  I did looked at this question, but the asker didn't got any reply. Still, I'm giving it a try. I want to embed a video file on a html page. The code works fine on IE but doesn't work on firefox. The code: <object id="WMPlay" width="640" height="480" classid="CLSID:6BF52A52-394A-11d3-B153-00C04F79FAA6" codebase="http://activex.microsoft.com/activex/controls/mplayer/en/nsmp2inf.cab#Version=5,1,52,70" standby="Loading Microsoft Windows Media Player components..." type="application/x-oleobject"> <param name="URL" value="XYZ.wma" /> <param name="AutoStart" value="false" /> <embed name="WMplay" width="640" height="480" type="application/x-mplayer2" pluginspage="http://www.microsoft.com/Windows/Downloads/Contents/Products/MediaPlayer/" src="XYZ.wma" allowchangedisplaysize="True" showcontrols="1" autostart="false" showdisplay="1" showstatusbar="1"> </embed> </object> Can someone please tell what am I missing? Or a better solution..something which is browser independent... :)

  Read the article

• Connect to Facebook with Javascript Client Library using Adobe AIR

  - by Chuck Hriczko

  I'm having an issue connecting to Facebook through the Javascript Client Library in Adobe AIR. It works fine in the browser but in Adobe AIR it seems to not be able to find the Facebook functions. Here is some code I copied from the Facebook website: (Oh and I have the xd_receiver.htm file in the correct path too) <textarea style="width: 1000px; height: 300px;" id="_traceTextBox"> </textarea> <script src="http://static.ak.connect.facebook.com/js/api_lib/v0.4/FeatureLoader.js.php" type="text/javascript"></script> // var api = FB.Facebook.apiClient; // require user to login api.requireLogin(function(exception){ FB.FBDebug.logLevel=1; FB.FBDebug.dump("Current user id is " + api.get_session().uid); // Get friends list //5-14-09: this code below is broken, correct code follows //api.friends_get(null, function(result){ // Debug.dump(result, 'friendsResult from non-batch execution '); // }); api.friends_get(new Array(), function(result, exception){ FB.FBDebug.dump(result, 'friendsResult from non-batch execution '); }); }); }); //]]> </script>

  Read the article

• PHP - dynamic page via subdomain

  - by Phil Jackson

  Hi, im creating profile pages based on a subdomains using the wildcard DNS setting. Problem being, if the subdomain is incorrect, I want it to redirect to the same page but without the subdomain infront ie; if ( preg_match('/^(www\.)?([^.]+)\.domainname\.co.uk$/', $_SERVER['HTTP_HOST'], $match)) { $DISPLAY_NAME = $match[2]; $query = "SELECT * FROM `" . ACCOUNT_TABLE . "` WHERE DISPLAY_NAME = '$DISPLAY_NAME' AND ACCOUNT_TYPE = 'premium_account'"; $q = mysql_query( $query, $CON ) or die( "_error_" . mysql_error() ); if( mysql_num_rows( $q ) != 0 ) { }else{ mysql_close( $CON ); header("location: http://www.domainname.co.uk"); exit; } } I get a browser error: Firefox has detected that the server is redirecting the request for this address in a way that will never complete. I think its because when using header("location: http://www.domainname.co.uk"); it still puts the sub domain infront i.e. ; header("location: http://www.sub.domainname.co.uk"); Does anyone know how to sort this and/or what is the problem. Regards, Phil

  Read the article

• Is DOM not being loaded ?

  - by Daniel

  I went through episode 88 (Dynamic menus) of the railscasts and when I try to load my *js.erb file in the browser shows me that my fetched data from the controller is getting there Controller def dynamic_departments @departments = Department.all end localhost:3000/javascripts/dynamic_departments.js var departments = new Array(); departments.push(new Array(1,'????',1)); departments.push(new Array(2,'???-???',2)); function facultySelected(){ faculty_id = $('falculty_id').getValue(); options = $('department_id').options; options.length = 1; departments.each(function(department){ if(department[0] == faculty_id){ options[options.length] = new Option(department[1],department[2]) } }); if(options.length == 1){ $('department_field').hide(); } else { $('department_field').show(); } } document.observe('dom:loaded', function(){ alert("DOM loaded"); //$('department_field').hide(); //$('faculty_id').observe('change',facultySelected); }); My routes.rb has the match ':controller/:action.:format' Still...after the page's loaded and I change the value of my collection_select or select nothing happens.What am I missing? *I called the 'alert' and commented the rest to test it....still nothing.

  Read the article

• I'm confused, how do I control cache so my clients can see website edits.

  - by Jared Christensen

  I host about 10 websites for clients. Every so often a client will ask for an update to their website. It may be a simple image change, new PDF or a simple text change. I make the change and then send them a link to the web page with the update. About an hour later I will get an email back from the client telling me they still see the old page. I will then explaining to them how to empty their browsers cache. What I'm trying to figure out is if there is a way I can tell their browser that I made an update to the website and that it should reload the page and update the cache. I thought about trying a meta tag but I read that they are not very reliable. Also I would still like the page to cache I just want to be able to clear it when I make an update. Is this possible? I'm an advanced front end web developer (HTML, CSS, Javascript) and know some PHP. Cache is just one of those things I don't really understand that well.

  Read the article

< Previous Page | 587 588 589 590 591 592 593 594 595 596 597 598  | Next Page >