Search Results

Search found 26977 results on 1080 pages for 'input device'.

Page 592/1080 | < Previous Page | 588 589 590 591 592 593 594 595 596 597 598 599  | Next Page >

• Serve up PC hard drive as USB mass storage

  - by sheepsimulator

  Is there a software package available that can serve up a hard-drive internal to a PC and make it available over USB to other USB Master nodes as mass storage? Ex: take your C: or /dev/hda drive on a PC (let's call the computer PC-A), and run a driver program which makes your C: or /dev/hda drive available to external devices as USB mass storage. When you'd hook up another PC (PC-B) to PC-A via USB, it would detect a USB mass storage device, which is C: or /dev/hda on PC-A. Is this even possible? EDIT: I know that there are other ways of making data on a drive available between two different computers (eg. putting PC-A's hdd in a USB-drive-enclosure, or having PC-A make the hdd available via a network share). But I'd like to know if the method that I describe above is even technically possible.

  Read the article

• Call issue with Freeswitch

  - by gbraad

  I am testing the following with Freeswitch and different devices (nokia n900, nokia e60, ekiga) and have similar results between them. On the Freeswitch server (1.0.4 in multi-tenant mode) I have several user profiles for a domain, e.g. 1000, 1001 for host.com The user are authenticated correctly and calls can be placede. When I place a call from a device registered as [email protected] to [email protected] it will show up at the other end (1002) as [email protected] I would expect this call to show up as [email protected]. The IP address is the one of from the Freeswitch server. Because of this, the calls are no correctly recognized by the address book on certain devices. Can the he domain FQDN of the callers domain/acount be used, instead of the IP address of the server in the SIP uri?

  Read the article

• Formatted USB flash drive with Disk Utility on Mac and now it is not recognized on any Mac or Windows machine

  - by Željko Filipin

  I have formatted Canyon CN-MP4A USB flash drive with Disk Utility on Mac and now it is not recognized on any Mac or Windows machine. I have formatted with Disk Utility > drive > Erease > Format > MS-DOS (FAT). Now when I plug it in any Mac or Windows machine, nothing happens. Like nothing is plugged in. It has a screen, and I was able to format it directly from the device before, but now when I turn it on, welcome screen appears, but nothing else. I can not get to the menu. Is there a way I can format it? I am looking for the answer on the internet, but no luck so far.

  Read the article

• How can I login to Ubuntu using a USB serial port?

  - by marc

  How can enable remote terminal login into Ubuntu 9.10 using a USB serial port? I created device /dev/ttyUSB0 and i want to allow logins using Hyper-Terminal. I found some resources but they are related to real hardware rs232 ports. I can't find any information about USB converter. So far I have established connection between that USB-serial port and my laptop. I can send text to the port (cp sometext.txt /dev/ttyUSB0) and read it using hyperterminal. What do I need to do to enable logins on this port?

  Read the article

• Xerox Workcentre 3119 and Linux

  - by Milan Babuškov

  I'm trying to get Xerox Workcentre 3119 printer to work on Linux. It's a multifunction device (printer and scanner). I run the CUPS web interface at: http://localhost:631/ and it recognizes it on USB port and even suggests Gutenprint driver from the list. When I try to print a test page, the printer goes through "warming up" process (i.e. lights blink and sound is heard) but does not print anything. There are no errors in /var/log/cups/error_log and access_log shows as if everything is ok. The printer works fine in Windows XP. Does anyone have any experience with this printer on Linux?

  Read the article

• CentOS disable filesystem check: superblock last mount time is in the future

  - by Zac B

  I'm persistently getting the "Superblock last mount time is in the future" error when booting CentOS 6. I've seen other questions which ask how to resolve this error, but I know exactly why it's occurring: our development/testing VMs regularly have their date set to times far from the present, and have all of their filesystems remounted. What I want to know is: how do I disable all consistency checking for superblock mount time in centOS? I've tried tune2fs -i 0 <device> and setting buggy_init_scripts=1 in /etc/e2fsck.conf and neither has worked; the problem persists.

  Read the article

• How to install Windows 8 from Ubuntu without a USB or DVD?

  - by 0xEDD1E

  Last week my windows 7 operating system crashed. So I installed Ubuntu 10.04 on the partition Windows 7 was previously on. I have two Partitions, C: and D:. In partition D: I have very important data and I can't format it (I can't backup because it's very heavy ~50 GB). Now I want to install Windows 8. I have downloaded the ISO file of Windows 8 Pro. I don't have a DVD writer or a USB device to Install this. I need to install this on C: partition (the partition on which I have already installed Ubuntu) and I need to protect the data in partition D:. How do I do this?

  Read the article

• 2 routers, both DHCP, no IP assigned

  - by piobyz

  I can't get DHCP to assign IP to my wireless devices. My network config is as follows: Nanostation5 Linksys WRT350N, which is connected with Nanostation via its INTERNET port. Nanostation: LAN IP Address: 192.168.1.20 WLAN IP Address: 192.168.0.79 Network Mode: Router and is getting its IP via DHCP from my ISP Netmask: 255.255.255.0 Gateway IP: 192.168.1.1 LAN Network settings: IP Address: 192.168.1.20 Netmask: 255.255.255.0 Enable NAT: YES ENABLE DHCP Server: YES Range 192.168.1.100 ~ 250 Netmask: 255.255.255.0 Enable DNS Proxy: YES Linksys: Internet Connection Type: DHCP Router IP: 192.168.2.1 Subnet Mask: 255.255.255.0 DHCP: Enabled Start IP: 192.168.2.100 ~ 120 Advanced Routing: NAT: Enabled What I can do is connecting manually with this config: IP: 192.168.2.101 Subnet Mask: 255.255.255.0 Router: 192.168.2.1 DNS: 192.168.1.20 Search domains: WRT350N I want to be able to connect to both routers independently(now its 192.168.1.20 for Nanostation, and 192.168.2.1 for Linksys) and connect any wireless device using DHCP. What should be IP ranges, masks, etc. on both devices?

  Read the article

• virtual box cannot detect webcam in ubuntu

  - by user23950

  I have installed virtual box for ubuntu 9.10. I installed a windows xp inside it. And I don't know why it does not make the webcam available for the yahoo messenger installed in xp. When I click on the device in the interface of virtual box. I can see the webcam but it is grayed out. And I don't know why. It is also not available when I use wine to execute yahoo messenger. And I know that it is working because I can see its working when I use skype for ubuntu. Any suggestions?Its an acer aspire laptop, the webcam is built in.

  Read the article

• Android tethering question

  - by Solignis

  Hi there, I have a Motorola Droid 1 with Android 2.2 on it. I found something odd that I don't understand why it works. If I plug my phone into my home computer which is Windows 7 and I turn on the tethering ability, I am met with a Verizon captive portal and it tells me I need to pay for a tethering plan (which I don't have). Now the weird thing, if I plug the same phone into my Ubuntu 10.10 laptop and enable tethering it works and can get on the internet with no captive portal showing up. The only thing I could notice that was different about the connections was Windows connected to the phone with an NDIS driver and Linux connected to the phone with what I think is a raw device mapping. Would that have anything to do with it?

  Read the article

• Windows shuts down unexpectedly when waking up from sleep

  - by Kush

  I've been facing this issue since yesterday, whenever I put the computer into sleep mode and when I wake up, it takes me to boot menu with choices; start Windows normally, safe mode, etc. in short, it shuts down unexpectedly while waking up. I have my laptop dual booted with up-to-date Windows 7 SP1 (32-bit) and Ubuntu 10.10. This problem is not happening with Ubuntu. I googled the issue and went through this, this and this page. But, none of the threads were helpful to solve it. I've found that there's something to do with device drivers. What can be done to resolve the issue? Can SFC utility solve it if it is due to corrupt system files?

  Read the article

• Openfiler RAID 10 option not found

  - by chrisling106

  Hi, I'm building a NAS using Openfiler2.3 (from 32-bit ISO), first of all I want to experiment it on VM first before going out and buy the harddrives needed. I created 5 virtual drives on VMware, sda is 2GB and the rest 1GB each (sdb to sde). I left sda blank and want to setup a RAID 10 disk using sdb, sdc, sdd and sde, 4 RAID partitions are setup successfully, but when I try to create a RAID device the only option for RAID level is 1, 0, 5 and 6. RAID 10 is not there! Can someone let me know what have I missed, please? TIA.

  Read the article

• Linux Logitech QuickCam Pro 9000 - microphone issues

  - by drahnr

  I got a Logitech Quickcam Pro 9000, the cam itself is working as it honors the UVC spec. This fancy WebCam has a integrated mic which worked some time before but now, it does no more. (Note: I use pulseaudio as it is a USB Mic and I am not really keen on the hassle of ALSA setup) Things I check already are if it gets detected at all: $ lsusb |grep Logi Bus 002 Device 002: ID 046d:0809 Logitech, Inc. Webcam Pro 9000 is muted in alsa-mixer - not the case, volume at 100 pavucontrol shows it too, but no input level bar! On top of that, if I open the gnome3 (fallback mode) audio panel(from the desktop panel), and disabel/reenable it in the hardware tab, it works "for some time"... Any hints? Any ideas? I am really out options for now, and the fact it worked like 6 months ago (perfectly) makes it no better.

  Read the article

• Unable to see a newly added virtual disk in Virtualbox

  - by uswaretech

  I am using virtualbox with Host: Ubuntu 9.10 Guest Win 7 My old virtual disk was filing up so I added a new virtual disk. After I restarted the guest, I can not see it in the My computer. I can see a new disk in the device manager though. The new disk was added as primary slave. What do I need to do to see it? I am guess I need to format the new virtual disk, but since I dont see any drive letter mapped to it, I am not sure of how to do this.

  Read the article

• Unable to play bluray movies or see bluray discs

  - by Jason Shultz

  I have a Optiarc BD ROM BC-5500S ATA Device and when I put bluray discs into the drive the computer doesn't read them. I hear the drive make 3 noises as if it's trying to read them. Nothing shows up in windows explorer. I am running windows 7 64bit. I can read DVDs and CDs just fine. Bluray seems to be the only problem. I have installed PowerDVD9, HP DVD Play and HP DVD Media Smart and nothing helps. My laptop is a hp dv7 1273cl. I bought it before the free upgrades to windows 7 were available so I wasn't able to get the upgrade and so HP won't assist me beyond telling me to format and reinstall Vista.

  Read the article

• Accidentally replaced the partition table using GParted in UBUNTU

  - by claws

  Hello, This machine has UBUNTU & wINDOWS XP. I'm currently logged into UBUNTU. I was just checking the features of GParted and accidentally clicked Device > Create Partition Table. A default MS-DOS partition table is created. Now if I re-start the Gparted there is nothing. Its showing entire disk as UNALLOCATED space. Lucky thing is All the drives (C:, D:, E:) are currently mounted and I'm in UBUNTU. I guess its possible to re-create the partition table using current status. But I don't know how? Can any one kindly tell me how to do this. This is a lab computer. If its not recoverable. I'm completely screwed!!

  Read the article

• wi-fi connection drops periodically for a few seconds

  - by sergiom

  I've read the similar question on wireless connections dropping, but no answer seems to apply to my case I have configured the wi-fi lan of my router to broadcast sid and use WPA-PSK. Every few minutes my wi-fi connection drops for a few seconds and then restores. When I use two computers and run a ping -n 50000 on both computers, I see that the connection drops at different times but with almost the same rate. the router is a zyxel, one pc runs windws vista and uses a USB wi-fi device from Belkin: F6D4050 the other one runs windows 7 is a Dell PC with an Intel(R) WiFi Link 5100 AGN there are no other wi-fi lans around

  Read the article

• Amazon mount EBS

  - by William

  I'm trying to mount /vol to a EBS volume on an Amazon EC2 instance. I'm formatting the device to xfs, adding "/dev/sdh /vol xfs noatime 0 0" to my /etc/fstab file, making the /vol dir and mounting it and whenever I try to do anything with that volume (create a file in /vol, cd, ls, anything) or I try to run df the server just freezes. Anyone have any idea what this might be? It's driving me crazy. Edit: It seems to freeze after I mount, has nothing to do with doing any commands to the volume it's self.

  Read the article

• Who moved this PC here aka Locate which port on switch a PC is plugged into

  - by ggonsalv

  The catch is you have no SNMP access, not even public. The end vision is locate a PC in building easily even if PC's are moved around. The MAC address of the PC is known and the software would run as client on each desktop, reporting back which port the PC was plugged into. Well from a programmer perspective, my network skills are not the best. Yes I could use SNMP, download the MAC port table, load it into SQL, match it to the PC name. Seems alot of work. Lets say I ping a single point from the PC. Would the echo have some thing unique for each device on the same switch? All I need to identify some thing unique for each PC plugged into each port. If the PC was moved from location A to a different location then the unique response would change.

  Read the article

• 8021x wireless clients auto connect prior to user login

  - by JohnyV

  I am using a 2008 r2 dc that also performs Radius (NPS), I also have a 2008 r2 certificate authority which is giving out certificates. The computers are getting the certificate and when a user logs into the device (that has previously logged in) gets put on the correct VLAN (according to there user access). However I cant get the computers to join the wireless network prior to logging in, so that they can log in with their domain accounts and authenticate through the wireless. The basic setup is Computer gets group policy which tells it to get a certificate the computer then has a seperate vlan to join just as a computer account however the wireless computer wont connect through that vlan. (this vlan allows login information only then once the users credentials are verified it puts them onto another VLAN). So I am trying to work out why the notebook wont auto connect to the wireless network as a computer. Thanks

  Read the article

• hardware for pushing buttons

  - by Elazar Leibovich

  Many times I want my computer to interface old hardware. Such as radio, light switch, etc. This mostly involves pushing pressing and moving various buttons and switches. I don't want to buy new hardware I want my computer to interface the old hardware I already have. I thought about it and reached to the conclusion that what I need is a general purpose button-pusher hardware. I need a simple device I can interface by a computer and would be able to push most of the buttons we have in daily accessories, without damaging the button. Is there any such accessory availible?

  Read the article

• [Ubuntu] How can i log-in to Ubuntu using USB-serial console (rs232) ?

  - by marc

  Welcome, How can enable remote terminal login into Ubuntu 9.10 using usb-serial terminal ? I got created device ttyUSB0 and i want allow to log-in using hyper-terminal. I found some resources but they are related to real! hardware rs232 ports, i can't find any information about USB converter. Right now i have established connection between that usb-serial port and my laptop (i can send text writing to port cp sometext.txt /dev/ttyUSB0 and read using hyperterminal). Any idea ? Regards

  Read the article

• PPP connection between PalmOS and Ubuntu (over ttyUSB0?) without crashy "visor" kernel module

  - by Chris Boyle

  I have a Palm Treo 680 which I'd like to use as a media remote, using Palm MPC. Almost the exact instructions on that page used to work perfectly for establishing a PPP connection over the USB cable; I think I last tried it in Ubuntu 9.04 (Jaunty). In Karmic, I find that /dev/ttyUSB{0,1} are not present by default, and when I modprobe visor to get them, the Palm immediately crashes and reboots, as seen in Ubuntu bug 522753 (it reboots again as long as the module is still loaded and USB is still connected). The usbserial module has the same result. From reading that bug and elsewhere, it appears that the visor module is abandoned, and jpilot and friends use some other approach to talk to PalmOS over USB these days, which might not even involve a ttyUSB device. My question is, therefore: How do I create a PPP connection between PalmOS and Karmic without crashing the Palm?

  Read the article

• How do you add a certificate for WLAN in Linux, at the command-line?

  - by Neil

  I'm using Maemo on a Nokia n810 Internet tablet, and when given a list of installed certificates to choose from when connecting to a PEAP wireless network, it's always blank. I've already installed a couple of certificates through the gui on the device, and only the certificate authorities show up. I've confirmed that Maemo's connection software that handles certificates is buggy, in such a way that certificates are never added, or properly added certificates cannot be found. Is there a way to add WLAN certificates at the command-line, and connect to a wireless network at the command-line as well? I used to use iwconfig to connect, but I never used it with PEAP. Note: I have nothing in /etc/ssl/certs

  Read the article

• Force10 S60 remote management

  - by StaringSkyward

  We've got a Force10 S60 switch to replace an older Cisco. I can't find a way to give the switch itself an IP address on the local VLAN so I can ssh to it. The config guide talks about using either a management interface on a separate management network or dedicating e.g. a gigabit port as a management port with a dedicated IP address. Ideally I would like to do what we do currently with the Cisco switches, which is in effect give the entire switch an IP so it can be reached from any host on the same VLAN without having to use up a physical port on the switch or physically connect the management port to another device. Is this possible with the S60 and if so, how would you give it, say the address 10.0.1.1 in vlan 10 (10.0.1.1/24)? Thanks!!!

  Read the article

< Previous Page | 588 589 590 591 592 593 594 595 596 597 598 599  | Next Page >