Search Results

Search found 3267 results on 131 pages for 'brian paul'.

Page 6/131 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• Samba users are writing files with the same owner

  - by Alex

  I created a Samba share and 3 users (Marc, Mary and Paul), both in Ubuntu (12.04 LTS) and Samba. Then I configured 3 Win7 computers to access the share, each with different credentials. I created 3 folders, one for every user, and chown'd them to the related user, chmod'd them to 0700 and even restarted Samba. Every time that Mary or Paul create a file or a directory in the share, it ends up to be owned by Marc. They all can access the Marc folder, but none can open Mary's or Paul's. Can you help me with this problem? What am I missing?

  Read the article

• How&rsquo;s your Momma an&rsquo; them?

  - by Bill Jones Jr.

  When a Southern “boy” like me sees somebody that used to be, or should be, a close friend or relative that they haven’t seen in a long time, that’s a typical greeting.  Come to think of it, we were often related to close friends. So “back in the day”, we not only knew people but everybody close to them.  When I started driving, my Dad told me to always drive carefully in Polk county.  He said if I ran into anybody there, it was likely they would be related or close family friends. Not so much any more… the cities have gotten bigger and more people come south and stay.  One of the curses of air conditioning I guess. Anyway, it’s been a while.  So “How’s your Momma and them”?  Have you been waiting for me to blog again?  Too bad, I’m back anyway <smile>. Here in Charlotte we just had another great code camp.  The Enterprise Developers Guild is going strong, thanks to the help of a lot of dedicated people.  Mark Wilson, Brian Gough, Syl Walker, Ghayth Hilal, Alberto Botero, Dan Thyer, Jean Doiron, Matt Duffield all come to mind.  Plus all the regulars who volunteer for every special event we have. Brian Gough put on a successful SharePoint Saturday.  Rafael Salas and our friends at the local Pass SQL group had a great SQL Saturday.  Brian Hitney and Glen Gordon keep on doing their usual great job for developers in the southeast as our local Microsoft reps. Since my last post, I have the honor of being designated the INetA Membership Mentor for Georgia in addition to mentoring the groups in the Carolinas for the past several years.  Georgia could be a really good thing since my wife likes shopping in Atlanta, not to mention how much we both like Georgia in general.  As I recall, my Momma had people in Georgia.  Wonder how their “Mommas an’ them” are doing?   Bill J

  Read the article

• Lots of great stuff going on with Oracle Secure Global Desktop!

  - by Chris Kawalek

  You're probably familiar with Oracle Secure Global Desktop, our solution for providing secure, browser-based access to Oracle Applications and other enterprise software. It's a fantastic product and one I've been personally involved with for nearly a decade! I wanted to give you a quick update on all the fantastic things that are going on with it: First, we have done a few videos with Oracle's Mohan Prabhala at trade shows recently. You can get a quick product refresher and an update on the latest new features by watching these: Next, we talked at length with Brian Madden and Gabe Knuth on Brian and Gabe LIVE about Oracle Secure Global Desktop. Click here or on the screenshot below to go to the brianmadden.com video. Part 1 focuses on Oracle Secure Global Desktop. Listen toward the end for Brian to say, “I kinda want this actually at TechTarget right now.” The analysts are talking about us, too. When we released Oracle Secure Global Desktop 4.7, Chris Wolf over at Gartner had this to say on Twitter. Last, just a quick reminder for existing Oracle Applications customers that Oracle Secure Global Desktop is easy for you to leverage for secure application access. Oracle Secure Global desktop is certified for use with Oracle browser-based applications such as Primavera, E-Business Suite and with Exalogic. Steven Chan over at the E-Business Suite Technology blog gives a great explanation of how Oracle Secure Global Desktop works with E-Business Suite, as an example. As the title says, lots of great stuff going on! -Chris

  Read the article

• Why do we need Hash by key? [migrated]

  - by Royi Namir

  (i'm just trying to find what am I missing...) Assuming John have a clear text message , he can create a regular hash ( like md5 , or sha256) and then encrypt the message. John can now send Paul the message + its (clear text)hash and Paul can know if the message was altered. ( decrypt and then compare hashes). Even if an attacker can change the encrpyted data ( without decrypt) - - when paul will open the message - and recalc the hash - it wont generate the same hash as the one john sent him. so why do we need hash by key ?

  Read the article

• ArchBeat Link-o-Rama for 2012-10-10

  - by Bob Rhubart

  Oracle's Analytics, Engineered Systems, and Big Data Strategy | Mark Rittman Part 1 of 3 in Oracle ACE Director Mark Rittman's series on Oracle Exalytics, Oracle R Enterprise and Endeca. Series: How to Kill the Architecture Department? Part 1 | Xebia Blog Don't let the title fool you. This is not an anti-architecture post. Rather, this post, part 1 of a now four-part series, offers suggestions for preserving architecture in a form that better supports agile organizations. BPM Suite configure BAM Adapter | Peter Paul van der Beek "To have the BPM server push events to BAM – Business Activity Monitoring – we have to configure the BPM suite to use the BAM Adapter," says Peter Paul van de Beek. "The BAM Adapter is configured (like other SOA Suite and BPM Adapters) in the WebLogic Server Console." Peter Paul shows you how in this brief post. A case for not installing your own software | James Gentsch "I look selfishly forward to cloud computing and engineered systems dramatically reducing the occurrence of problems triggered by unforeseen environmental situations in the software I am responsible for," says James Gentsch. "I think this is an evolutionary game changer that will be a huge benefit to the reliability and consistent performance of the software for my customers, and may make 'well, it works here' a well forgotten phase for future software developers." Thought for the Day "I'm a strong believer in being minimalistic. Unless you actually are going to solve the general problem, don't try and put in place a framework for solving a specific one, because you don't know what that framework should look like." — Anders Hejlsberg Source: SoftwareQuotes.com`

  Read the article

• Team Foundation Service Preview now open for all!

  - by Tarun Arora

  The concept of TFS in the cloud was first presented back in early 2010, the product team worked hard to preview a constantly evolving solution at the BUILD conference last year and after having completed 31 Sprints today the preview service has been opened for all. No more invitation codes required, TfsPreview has been made public! “Since we announced the Team Foundation Service Preview at the BUILD conference last year, we’ve limited the on boarding of new customers by requiring invitation codes to create accounts.  The main reason for this has been to control the growth of the service to make sure it didn’t run away from us and end up with a bad user experience.  In this time period, we’ve continued to work on our infrastructure, performance, scale, monitoring, management and, of course, some cool new features like cloud build. ”   - Brian Harry Since the service is still in preview, it is free for all… If you haven’t, now is the best time to try out the offering. There is no fixed time line on how long before service becomes chargeable but the terms of service support production use, the service is reliable and the product team committed to carry all of your data forward into production. “The service will remain in “preview” for a while longer while we work through additional features like data portability, commercial terms, etc but the terms of service support production use, the service is reliable and we expect to carry all of your data forward into production. ”  - Brian Harry As of today it’s possible to use TFS Preview with VS 2012 RC, VS 2010 SP1, VS 2008 SP1, the service currently does not work with VS 2005, this is something the product team is actively working on. You can refer to Brian’s announcement blog post here, http://blogs.msdn.com/b/bharry/archive/2012/06/11/team-foundation-service-preview-is-public.aspx

  Read the article

• Security in Robots and Automated Systems

  - by Roger Brinkley

  Alex Dropplinger posted a Freescale blog on Securing Robotics and Automated Systems where she asks the question,“How should we secure robotics and automated systems?”.My first thought on this was duh, make sure your robot is running Java. Java's built-in services for authentication, authorization, encryption/confidentiality, and the like can be leveraged and benefit robotic or autonomous implementations. Leveraging these built-in services and pluggable encryption models of Java makes adding security to an exist bot implementation much easier. But then I thought I should ask an expert on robotics so I fired the question off to Paul Perrone of Perrone Robotics. Paul's build automated vehicles and other forms of embedded devices like auto monitoring of commercial vehicles on highways.He says that most of the works that robots do now are autonomous so it isn't a problem in the short term. But long term projects like collision avoidance technology in automobiles are going to require it.Some of the work he's doing with his Java-based MAX, set of software building blocks containing a wide range of low level and higher level software modules that developers can use to build simple to complex robot and automation applications faster and cheaper, already provide some support for JAUS compliance and because their based on Java, access to standards based security APIs.But, as Paul explained to me, "the bottom line is…it depends on the criticality level of the bot, it's network connectivity, and whether or not a standards compliance is required."

  Read the article

• TechEd 2012: MVVM In XAML

  - by Tim Murphy

  Paul Sheriff was a real character at the start of his MVVM in XAML session.  There was a lot of sarcasm and self deprecation going on prior to the .  That is never a bad way to get things rolling right after lunch.  Then things got semi-serious. The presentation itself had a number of surprises, but not all of them had to do with XAML.  When he flipped over his company’s code generation tool it took me off guard.  I am used to generator that create code for a whole project, but his tools were able to create different types of constructs on demand.  It also made it easier to follow what he was doing than some of the other demos I have seen this week where people were using code snippets. Getting to the heart of the topic I found myself thinking that I may have found my utopia for application development in MVVM.  Yes, I know there is no such thing, but this comes closer than any other pattern I have learned about.  This pattern allows the application to have better separation of concerns than I have seen before.  This is especially true since you can leverage data binding.  I’m not sure why it has taken me so long to find time for this subject. As Paul demonstrated using this pattern with XAML gives you multi-platform reusable code when you leverage common utility classes and ModelView classes.  The one drawback I see is that you have to go to the lowest common denominator between the platforms you want to support, but you always have to weigh the trade offs. And finally, the Visual Studio nuggets just keep coming.  Even though it has been available for several generations of Visual Studio I have never seen someone use linked files within a solution.  It just goes to show that I should spend more time exploring the deeper features of each dialog. del.icio.us Tags: TechEd,TechEd 2012,MVVM,Paul Sheriff,Patterns,Visual Studio 2012

  Read the article

• Running RSpec Files From ruby code

  - by Brian D.

  I'm trying to run RSpec tests straight from ruby code. More specifically, I'm running some mysql scripts, loading the rails test environment and then I want to run my rspec tests (which is what I'm having trouble with)... I'm trying to do this with a rake task. Here is my code so far: require"spec" require "spec/rake/spectask" RAILS_ENV = 'test' namespace :run_all_tests do desc "Run all of your tests" puts "Reseting test database..." system "mysql --user=root --password=dev < C:\\Brian\\Work\\Personal\\BrianSite\\database\\BrianSite_test_CreateScript.sql" puts "Filling database tables with test data..." system "mysql --user=root --password=dev < C:\\Brian\\Work\\Personal\\BrianSite\\database\\Fill_Test_Tables.sql" puts "Starting rails test environment..." task :run => :environment do puts "RAILS_ENV is #{RAILS_ENV}" # Run rspec test files here... require "spec/models/blog_spec.rb" end end I thought the require "spec/models/blog_spec.rb" would do it, but the tests aren't running. Anyone know where I'm going wrong? Thanks for any help.

  Read the article

• Get Exchange Online Mailbox Size in GB

  - by Brian Jackett

  As mentioned in my previous post I was recently working with a customer to get started with Exchange Online PowerShell commandlets.  In this post I wanted to follow up and show one example of a difference in output from commandlets in Exchange 2010 on-premises vs. Exchange Online.   Problem    The customer was interested in getting the size of mailboxes in GB.  For Exchange on-premises this is fairly easy.  A fellow PFE Gary Siepser wrote an article explaining how to accomplish this (click here).  Note that Gary’s script will not work when remoting from a local machine that doesn’t have the Exchange object model installed.  A similar type of scenario exists if you are executing PowerShell against Exchange Online.  The data type for TotalItemSize  being returned (ByteQuantifiedSize) exists in the Exchange namespace.  If the PowerShell session doesn’t have access to that namespace (or hasn’t loaded it) PowerShell works with an approximation of that data type.    The customer found a sample script on this TechNet article that they attempted to use (minor edits by me to fit on page and remove references to deleted item size.)   Get-Mailbox -ResultSize Unlimited | Get-MailboxStatistics | Select DisplayName,StorageLimitStatus, ` @{name="TotalItemSize (MB)"; expression={[math]::Round( ` ($_.TotalItemSize.Split("(")[1].Split(" ")[0].Replace(",","")/1MB),2)}}, ` ItemCount | Sort "TotalItemSize (MB)" -Descending | Export-CSV "C:\My Documents\All Mailboxes.csv" -NoTypeInformation     The script is targeted to Exchange 2010 but fails for Exchange Online.  In Exchange Online when referencing the TotalItemSize property though it does not have a Split method which ultimately causes the script to fail.   Solution    A simple solution would be to add a call to the ToString method off of the TotalItemSize property (in bold on line 5 below).   Get-Mailbox -ResultSize Unlimited | Get-MailboxStatistics | Select DisplayName,StorageLimitStatus, ` @{name="TotalItemSize (MB)"; expression={[math]::Round( ` ($_.TotalItemSize.ToString().Split("(")[1].Split(" ")[0].Replace(",","")/1MB),2)}}, ` ItemCount | Sort "TotalItemSize (MB)" -Descending | Export-CSV "C:\My Documents\All Mailboxes.csv" -NoTypeInformation      This fixes the script to run but the numerous string replacements and splits are an eye sore to me.  I attempted to simplify the string manipulation with a regular expression (more info on regular expressions in PowerShell click here).  The result is a workable script that does one nice feature of adding a new member to the mailbox statistics called TotalItemSizeInBytes.  With this member you can then convert into any byte level (KB, MB, GB, etc.) that suits your needs.  You can download the full version of this script below (includes commands to connect to Exchange Online session). $UserMailboxStats = Get-Mailbox -RecipientTypeDetails UserMailbox ` -ResultSize Unlimited | Get-MailboxStatistics $UserMailboxStats | Add-Member -MemberType ScriptProperty -Name TotalItemSizeInBytes ` -Value {$this.TotalItemSize -replace "(.*\()|,| [a-z]*\)", ""} $UserMailboxStats | Select-Object DisplayName,@{Name="TotalItemSize (GB)"; ` Expression={[math]::Round($_.TotalItemSizeInBytes/1GB,2)}}   Conclusion    Moving from on-premises to the cloud with PowerShell (and PowerShell remoting in general) can sometimes present some new challenges due to what you have access to.  This means that you must always test your code / scripts.  I still believe that not having to physically RDP to a server is a huge gain over some of the small hurdles you may encounter during the transition.  Scripting is the future of administration and makes you more valuable.  Hopefully this script and the concepts presented help you be a better admin / developer.         -Frog Out     Links The Get-MailboxStatistics Cmdlet, the TotalitemSize Property, and that pesky little “b” http://blogs.technet.com/b/gary/archive/2010/02/20/the-get-mailboxstatistics-cmdlet-the-totalitemsize-property-and-that-pesky-little-b.aspx   View Mailbox Sizes and Mailbox Quotas Using Windows PowerShell http://technet.microsoft.com/en-us/exchangelabshelp/gg576861#ViewAllMailboxes   Regular Expressions with Windows PowerShell http://www.regular-expressions.info/powershell.html   “I don’t always test my code…” image http://blogs.pinkelephant.com/images/uploads/conferences/I-dont-always-test-my-code-But-when-I-do-I-do-it-in-production.jpg   The One Thing: Brian Jackett and SharePoint 2010 http://www.youtube.com/watch?v=Sg_h66HMP9o

  Read the article

• Securing smtp with login

  - by Paul Peelen

  I have a ispconfig server, and it seems that someone is using it to send spam. I got about 130 "Mail Delivery System" email about declined send email. This spammer uses my email address as sent from adress, so I get all these email adresses to my mail. I am using Postfix and Courier. I installed my server according to this guide: http://www.howtoforge.com/perfect-server-debian-lenny-ispconfig3-p3 I did this a few months ago. My question: Can I secure my server to require login to be able to send email, and if so... how? Thanks! EDIT Some data from mail.log, these kind of error show up constantly: Jun 15 17:58:16 bolt postfix/qmgr[10712]: CC7DA1242AE: from=<paul@*****.se>, size=3782, nrcpt=1 (queue active) Jun 15 17:58:16 bolt postfix/smtp[11337]: CC7DA1242AE: to=<[email protected]>, relay=none, delay=4641, delays=4640/0.01/0.32/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=cmlisboa.pt type=MX: Host not found, try again) Jun 15 17:58:19 bolt postfix/smtpd[10836]: connect from static-200-105-220-154.acelerate.net[200.105.220.154] Jun 15 17:58:20 bolt postfix/smtpd[10836]: NOQUEUE: reject: RCPT from static-200-105-220-154.acelerate.net[200.105.220.154]: 550 5.1.1 <advertising@*****.com>: Recipient address rejected: User unknown in virtual mailbox table; from=<[email protected]> to=<advertising@*****.com> proto=ESMTP helo=<static-200-105-220-154.acelerate.net> Jun 15 17:58:20 bolt postfix/smtpd[10836]: lost connection after DATA (0 bytes) from static-200-105-220-154.acelerate.net[200.105.220.154] Jun 15 17:58:20 bolt postfix/smtpd[10836]: disconnect from static-200-105-220-154.acelerate.net[200.105.220.154] Jun 15 17:58:29 bolt postfix/smtpd[10834]: connect from unknown[62.176.172.226] Jun 15 17:58:32 bolt postfix/smtpd[10834]: 386791241F9: client=unknown[62.176.172.226] Jun 15 17:58:34 bolt postfix/cleanup[10975]: 386791241F9: message-id=<[email protected]> Jun 15 17:58:34 bolt postfix/qmgr[10712]: 386791241F9: from=<[email protected]>, size=867, nrcpt=1 (queue active) Jun 15 17:58:35 bolt postfix/smtpd[10834]: disconnect from unknown[62.176.172.226] Jun 15 17:58:35 bolt amavis[11084]: (11084-17) Blocked SPAM, [62.176.172.226] [62.176.172.226] <[email protected]> -> <*****@*****>, Message-ID: <[email protected]>, mail_id: XczovKoMBYNr, Hits: 18.471, size: 867, 833 ms Jun 15 17:58:35 bolt postfix/smtp[10732]: 386791241F9: to=<*****@*****>, relay=127.0.0.1[127.0.0.1]:10024, delay=3.5, delays=2.7/0/0/0.83, dsn=2.7.0, status=sent (250 2.7.0 Ok, discarded, id=11084-17 - SPAM) Jun 15 17:58:35 bolt postfix/qmgr[10712]: 386791241F9: removed Jun 15 17:58:43 bolt postfix/smtpd[10836]: warning: 178.121.154.194: address not listed for hostname mm-194-154-121-178.dynamic.pppoe.mgts.by Jun 15 17:58:43 bolt postfix/smtpd[10836]: connect from unknown[178.121.154.194] Jun 15 17:58:45 bolt postfix/smtpd[10727]: connect from unknown[180.134.223.86] EDIT #2 Got some more info from the logs, this is a send request: mail.info.1:Jun 15 16:41:57 bolt amavis[5399]: (05399-06) Passed CLEAN, [110.139.48.64] [110.139.48.64] <paul@*****.se> -> <[email protected]>, Message-ID: <CHILKAT-MID-7c54ebcf-5501-de9b-f0b1-4f0234290d8d@HP-IRISH>, mail_id: 35l56Ramx6Nc, Hits: -2.941, size: 3329, queued_as: 2485770086, 136 ms mail.info.1:Jun 15 16:41:57 bolt postfix/smtp[4743]: 375C570082: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=4.8, delays=4.7/0/0/0.14, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=05399-06, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 2485770086) Which apparently got thrue. Any ideas how to restrict this?

  Read the article

• SharePoint Saturday Michigan 2010 Recap, Slides, and Photos

  - by Brian Jackett

  This past weekend I attended SharePoint Saturday Michigan (SPSMI) in Ann Arbor, Michigan.  For those unfamiliar, SharePoint Saturday is a community driven event where various speakers gather to present at a FREE conference on all topics related to SharePoint.  This made my third SharePoint Saturday attended and second I’ve spoken at.  I believe today it was announced that about 210 people total attended the event.  I was very happy with the turnout, especially the ratio of male to female attendees.  Typically with computer related conferences the ratio leans towards more males attending, but both Peter Serzo (one of conference organizers) and I both commented to each other that at the end of the day it appeared to be close to 40% women in the crowd.  So here’s my recap of the weekend. Arrival     Friday afternoon I drove up from Columbus, OH to Ann Arbor, MI and arrived around 4pm.  I was attempting to avoid the rush hour traffic and construction backups.  Turned out to be a good idea because other speakers coming up Friday got stuck on a highway which literally closed down in both directions due to a bad accident.  I was talking my friend Sean McDonough through the highway closing and this was the first time I had seen a solid black traffic line on Google Maps.  Most of us are familiar with Green, Yellow, and Red, but this line was black if that tells you how bad it got. Speaker “Dinner”     Fast forward a few hours and it was time for the speaker “dinner.”  I put “dinner” in quotes because with this night alone SPSMI set a new bar for nicest and most extravagant speaker appreciation events for SharePoint Saturday.  By tapping into some very influential contacts, the conference organizers were able to provide a truck limo (yep you heard right) with refreshments, access to an underground suite at the Palace of Auburn Hills, and courtside tickets to see the Detroit Pistons play that night.  Being a Michigan native I have to say that I was absolutely floored by this experience and very thankful to our conference organizers Peter, Sebastian, and Jesse along with Trillium Teamologies. Sessions     The actual conference started Saturday morning at 9am with the keynote by Rob Collie who is the Microsoft program manager for PowerPivot.  The day continued and I attended the following sessions: Mike Watson (@mikewat) – “SharePoint 2010 Fight Night: Devs vs. Admins” Karl Swedeberg (@kswedberg) – “A Walk on the Client Side with jQuery“ [my session] Brian Jackett (@briantjackett) - “Real World Deployment of SharePoint 2007 Solutions” Jeff Willinger (@jwillie) - “Social Computing and Collaboration Inside and Outside the 4 Walls” Paul Schaeflein (@paulschaeflein) – “PowerShell for the SharePoint Developer” My Presentation     I had a great time presenting my session on Deploying SharePoint 2007 Solutions, but it wasn’t without its fair share of technical issues.  As my session was right after lunch I came in to my room 10 mins early to set up my laptop, slides, and demos.  As a quick background note, a few months ago I got an upgraded laptop from my company Sogeti and have been dual booting it between XP (factory installed) and Windows Server 2008 R2 w/ Hyper-V.  As such I had prepared all of my demo virtual machines to run under Hyper-V.  About 3 minutes before my session was scheduled to start though it became apparent that I did not have the correct display drivers to connect Windows Server 2008 R2 to the projector…     As you can imagine this was a slight cause for concern as I was potentially going to be unable to give my presentation.  Luckily for me I usually prepare for such unforeseen issues and had my presentation and some spare VMs that would run on XP on my external hard drive.  Knowing this I rebooted my machine into XP and began my presentation without slides until about 5 mins into the session when everything was up and running on XP.  Despite this being the first time I gave this presentation I have to say it was one of my favorites I’ve given so far.  The audience was very engaged in the session and I received some great, positive feedback afterwards.  Thanks to all who attended my session, I appreciate it very much. Link to Presentation Files     For those of you who attended my session and would like my slides or demo PowerShell scripts they can be found on my SkyDrive at the link below.  Also, if you have a few minutes and wouldn’t mind rating my session I have this session posted on SpeakerRate.  As speakers we always appreciate any and all feedback attendees offer, so thank you if you are able to provide any. SkyDrive folder with session files Rate my SharePoint 2007 Solutions session   Picture Albums     For everyone else, here are my pictures from the weekend.  The first link is to my FaceBook album which will have tagging (recommend this one.)  The second is to my Live album if you care for higher resolution images. http://www.facebook.com/album.php?aid=2154482&id=21905041&l=a3fb72ee8c View Full Album Conclusion     A big thank you goes out to all of the organizers, speakers, sponsors, and attendees of SPSMI.  As I’ve said so many times, without each and every one of you these events wouldn’t be possible.  I thoroughly enjoyed this trip back to my home state and presenting a new session.  For those interested in my upcoming schedule I will be giving two sessions on PowerShell at SharePoint Saturday Charlotte in April, helping plan Stir Trek: Iron Man Edition in May, and I’m submitting sessions to Day of .Net Ann Arbor in May as well.  Beyond that I haven’t planned out any travels.  Thanks for reading my recap.  Look forward to more technical posts now that I have a short break in conferences.         -Frog Out   links: Michigan image

  Read the article

• Goodbye XML&hellip; Hello YAML (part 2)

  - by Brian Genisio's House Of Bilz

  Part 1 After I explained my motivation for using YAML instead of XML for my data, I got a lot of people asking me what type of tooling is available in the .Net space for consuming YAML.  In this post, I will discuss a nice tooling option as well as describe some small modifications to leverage the extremely powerful dynamic capabilities of C# 4.0.  I will be referring to the following YAML file throughout this post Recipe: Title: Macaroni and Cheese Description: My favorite comfort food. Author: Brian Genisio TimeToPrepare: 30 Minutes Ingredients: - Name: Cheese Quantity: 3 Units: cups - Name: Macaroni Quantity: 16 Units: oz Steps: - Number: 1 Description: Cook the macaroni - Number: 2 Description: Melt the cheese - Number: 3 Description: Mix the cooked macaroni with the melted cheese Tooling It turns out that there are several implementations of YAML tools out there.  The neatest one, in my opinion, is YAML for .NET, Visual Studio and Powershell.  It includes a great editor plug-in for Visual Studio as well as YamlCore, which is a parsing engine for .Net.  It is in active development still, but it is certainly enough to get you going with YAML in .Net.  Start by referenceing YamlCore.dll, load your document, and you are on your way.  Here is an example of using the parser to get the title of the Recipe: var yaml = YamlLanguage.FileTo("Data.yaml") as Hashtable; var recipe = yaml["Recipe"] as Hashtable; var title = recipe["Title"] as string; In a similar way, you can access data in the Ingredients set: var yaml = YamlLanguage.FileTo("Data.yaml") as Hashtable; var recipe = yaml["Recipe"] as Hashtable; var ingredients = recipe["Ingredients"] as ArrayList; foreach (Hashtable ingredient in ingredients) { var name = ingredient["Name"] as string; } You may have noticed that YamlCore uses non-generic Hashtables and ArrayLists.  This is because YamlCore was designed to work in all .Net versions, including 1.0.  Everything in the parsed tree is one of two things: Hashtable, ArrayList or Value type (usually String).  This translates well to the YAML structure where everything is either a Map, a Set or a Value.  Taking it further Personally, I really dislike writing code like this.  Years ago, I promised myself to never write the words Hashtable or ArrayList in my .Net code again.  They are ugly, mostly depreciated collections that existed before we got generics in C# 2.0.  Now, especially that we have dynamic capabilities in C# 4.0, we can do a lot better than this.  With a relatively small amount of code, you can wrap the Hashtables and Array lists with a dynamic wrapper (wrapper code at the bottom of this post).  The same code can be re-written to look like this: dynamic doc = YamlDoc.Load("Data.yaml"); var title = doc.Recipe.Title; And dynamic doc = YamlDoc.Load("Data.yaml"); foreach (dynamic ingredient in doc.Recipe.Ingredients) { var name = ingredient.Name; } I significantly prefer this code over the previous.  That’s not all… the magic really happens when we take this concept into WPF.  With a single line of code, you can bind to the data dynamically in the view: DataContext = YamlDoc.Load("Data.yaml"); Then, your XAML is extremely straight-forward (Nothing else.  No static types, no adapter code.  Nothing): <StackPanel> <TextBlock Text="{Binding Recipe.Title}" /> <TextBlock Text="{Binding Recipe.Description}" /> <TextBlock Text="{Binding Recipe.Author}" /> <TextBlock Text="{Binding Recipe.TimeToPrepare}" /> <TextBlock Text="Ingredients:" FontWeight="Bold" /> <ItemsControl ItemsSource="{Binding Recipe.Ingredients}" Margin="10,0,0,0"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Quantity}" /> <TextBlock Text=" " /> <TextBlock Text="{Binding Units}" /> <TextBlock Text=" of " /> <TextBlock Text="{Binding Name}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> <TextBlock Text="Steps:" FontWeight="Bold" /> <ItemsControl ItemsSource="{Binding Recipe.Steps}" Margin="10,0,0,0"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Number}" /> <TextBlock Text=": " /> <TextBlock Text="{Binding Description}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> </StackPanel> This nifty XAML binding trick only works in WPF, unfortunately.  Silverlight handles binding differently, so they don’t support binding to dynamic objects as of late (March 2010).  This, in my opinion, is a major lacking feature in Silverlight and I really hope we will see this feature available to us in Silverlight 4 Release.  (I am not very optimistic for Silverlight 4, but I can hope for the feature in Silverlight 5, can’t I?) Conclusion I still have a few things I want to say about using YAML in the .Net space including de-serialization and using IronRuby for your YAML parser, but this post is hopefully enough to see how easy it is to incorporate YAML documents in your code. Codeplex Site for YAML tools Dynamic wrapper for YamlCore

  Read the article

• Cardinality Estimation Bug with Lookups in SQL Server 2008 onward

  - by Paul White

  Cost-based optimization stands or falls on the quality of cardinality estimates (expected row counts).  If the optimizer has incorrect information to start with, it is quite unlikely to produce good quality execution plans except by chance.  There are many ways we can provide good starting information to the optimizer, and even more ways for cardinality estimation to go wrong.  Good database people know this, and work hard to write optimizer-friendly queries with a schema and metadata (e.g. statistics) that reduce the chances of poor cardinality estimation producing a sub-optimal plan.  Today, I am going to look at a case where poor cardinality estimation is Microsoft’s fault, and not yours. SQL Server 2005 SELECT th.ProductID, th.TransactionID, th.TransactionDate FROM Production.TransactionHistory AS th WHERE th.ProductID = 1 AND th.TransactionDate BETWEEN '20030901' AND '20031231'; The query plan on SQL Server 2005 is as follows (if you are using a more recent version of AdventureWorks, you will need to change the year on the date range from 2003 to 2007): There is an Index Seek on ProductID = 1, followed by a Key Lookup to find the Transaction Date for each row, and finally a Filter to restrict the results to only those rows where Transaction Date falls in the range specified.  The cardinality estimate of 45 rows at the Index Seek is exactly correct.  The table is not very large, there are up-to-date statistics associated with the index, so this is as expected. The estimate for the Key Lookup is also exactly right.  Each lookup into the Clustered Index to find the Transaction Date is guaranteed to return exactly one row.  The plan shows that the Key Lookup is expected to be executed 45 times.  The estimate for the Inner Join output is also correct – 45 rows from the seek joining to one row each time, gives 45 rows as output. The Filter estimate is also very good: the optimizer estimates 16.9951 rows will match the specified range of transaction dates.  Eleven rows are produced by this query, but that small difference is quite normal and certainly nothing to worry about here.  All good so far. SQL Server 2008 onward The same query executed against an identical copy of AdventureWorks on SQL Server 2008 produces a different execution plan: The optimizer has pushed the Filter conditions seen in the 2005 plan down to the Key Lookup.  This is a good optimization – it makes sense to filter rows out as early as possible.  Unfortunately, it has made a bit of a mess of the cardinality estimates. The post-Filter estimate of 16.9951 rows seen in the 2005 plan has moved with the predicate on Transaction Date.  Instead of estimating one row, the plan now suggests that 16.9951 rows will be produced by each clustered index lookup – clearly not right!  This misinformation also confuses SQL Sentry Plan Explorer: Plan Explorer shows 765 rows expected from the Key Lookup (it multiplies a rounded estimate of 17 rows by 45 expected executions to give 765 rows total). Workarounds One workaround is to provide a covering non-clustered index (avoiding the lookup avoids the problem of course): CREATE INDEX nc1 ON Production.TransactionHistory (ProductID) INCLUDE (TransactionDate); With the Transaction Date filter applied as a residual predicate in the same operator as the seek, the estimate is again as expected: We could also force the use of the ultimate covering index (the clustered one): SELECT th.ProductID, th.TransactionID, th.TransactionDate FROM Production.TransactionHistory AS th WITH (INDEX(1)) WHERE th.ProductID = 1 AND th.TransactionDate BETWEEN '20030901' AND '20031231'; Summary Providing a covering non-clustered index for all possible queries is not always practical, and scanning the clustered index will rarely be optimal.  Nevertheless, these are the best workarounds we have today. In the meantime, watch out for poor cardinality estimates when a predicate is applied as part of a lookup. The worst thing is that the estimate after the lookup join in the 2008+ plans is wrong.  It’s not hopelessly wrong in this particular case (45 versus 16.9951 is not the end of the world) but it easily can be much worse, and there’s not much you can do about it.  Any decisions made by the optimizer after such a lookup could be based on very wrong information – which can only be bad news. If you think this situation should be improved, please vote for this Connect item. © 2012 Paul White – All Rights Reserved twitter: @SQL_Kiwi email: [email protected]

  Read the article

• Thoughts on Thoughts on TDD

  Brian Harry wrote a post entitled Thoughts on TDD that I thought I was going to let lie, but I find that I need to write a response. I find myself in agreement with Brian on many points in the post, but I disagree with his conclusion. Not surprisingly, I agree with the things that he likes about TDD. Focusing on the usage rather than the implementation is really important, and this is important whether you use TDD or not. And YAGNI was a big theme in my Seven Deadly Sins of Programming series. Now, on to what he doesnt like. He says that he finds it inefficient to have tests that he has to change every time he refactors. Here is where we part company. If you are having to do a lot of test rewriting (say, more than a couple of minutes work to get back to green) *often* when you are refactoring your code, I submit that either you are testing things that you dont need to test (internal details rather than external implementation), your code perhaps isnt as decoupled as it could be, or maybe you need a visit to refactorers anonymous. I also like to refactor like crazy, but as we all know, the huge downside of refactoring is that we often break things. Important things. Subtle things. Which makes refactoring risky. *Unless* we have a set of tests that have great coverage. And TDD (or Example-based Design, which I prefer as a term) gives those to us. Now, I dont know what sort of coverage Brian gets with the unit tests that he writes, but I do know that for the majority of the developers Ive worked with and I count myself in that bucket the coverage of unit tests written afterwards is considerably inferior to the coverage of unit tests that come from TDD. For me, it all comes down to the answer to the following question: How do you ensure that your code works now and will continue to work in the future? Im willing to put up with a little efficiency on the front side to get that benefit later. Its not the writing of the code thats the expensive part, its everything else that comes after. I dont think that stepping through test cases in the debugger gets you what you want. You can verify what the current behavior is, sure, and do it fairly cheaply, but you dont help the guy in the future who doesnt know what conditions were important if he has to change your code. His second part that he doesnt like backing into an architecture (go read to see what he means). Ive certainly had to work with code that was like this before, and its a nightmare the code that nobody wants to touch. But thats not at all the kind of code that you get with TDD, because if youre doing it right youre doing the write a failing tests, make it pass, refactor approach. Now, you may miss some useful refactorings and generalizations for this, but if you do, you can refactor later because you have the tests that make it safe to do so, and your code tends to be easy to refactor because the same things that make code easy to write unit tests for make it easy to refactor. I also think Brian is missing an important point. We arent all as smart as he is. Im reminded a bit of the lesson of Intentional Programming, Charles Simonyis paradigm for making programming easier. I played around with Intentional Programming when it was young, and came to the conclusion that it was a pretty good thing if you were as smart as Simonyi is, but it was pretty much a disaster if you were an average developer. In this case, TDD gives you a way to work your way into a good, flexible, and functional architecture when you dont have somebody of Brians talents to help you out. And thats a good thing.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• BIOS flash XP, 1 long beep, 2 short beeps, over&over

  - by Paul

  BIOS issue on HP dv9233cl laptop, wiped drive of Vista, loaded XP, not all the drives loaded. Went to the HP website, downloaded all drivers for this laptop. Started loading them. Loaded WIN Flash HP Network System BIOS Window SP42187. After a minute a low resolution screen appeared stating "It is now safe to turn off the computer" I waited a minute and half. Turned it off. Let it set 10 seconds try to start and No screen images at all and a nasty loud long beep 2 short beeps, 2 seconds of silence and it happens over & over again. I have unplugged/removed battery, still same problem, Any sugg.... Thx.. Paul

  Read the article

• LTO 3 tape drive needing repaired

  - by DO it all Paul

  We have an IBM LTO 3 tape drive that needs repaired and with the £400 price tag i'm having to shop around for quotes. My question is has anyone actually repaired one before and how was in done? The first error LED was showing a 6, then i cleared the mangled tape only for it to start flashing alternate 'o' on the 7 segment display, simliar to a half 8, flashing top to bottom and it would just flash away like that coupled with a flashing amber light. I tried a reset holding the eject button for it to show an 'r' the go back to flashing again as before. I checked the IBM solutions for the codes but this flashing isn't documented at all. Would be great if anyone had any experience in this area. Thank you, Paul

  Read the article

• HTTP downloads slow - FTP of same file very fast - Windows 2003

  - by Paul Hinett

  I am having some issues with download speeds on my site via http, i am averaging around 70kbps downloading a file that is around 70mb. But if i connect to my server via FTP and download the same file on the same computer / connection i am averaging about 300+kbps. I know my server has alot of connections at any one time, probably around 400 connections. My server has a 1gbps connection to the internet so there is plenty of bandwidth available, as proven with the FTP. I have no throttling of any kind enabled in IIS. If interested there is a test file here you can download to check the speed: http://filesd.house-mixes.com/test.zip I am based in the UK and the server is in Washington, USA if that makes any difference. Paul

  Read the article

• Setting up routing for MS DirectAccess to a VMWare EsXi Host

  - by Paul D'Ambra

  I'm trying to set up DirectAccess on a virtual machine so I can demonstrate it's value and then if need be add a physical machine to host it. I'm hitting a problem because the Direct Access machine (DA01) needs to have 2 public addresses actually configured on the external adapter but there is a Zyxel Zywall USG300 between the VMware ESXi host and the outside world. I've summarised my setup in this diagram If I ping from the LAN to 212.x.y.89 I get a response but if I ping from the VM I get destination host unreachable. I used "route add 212.x.y.89 192.c.d.1" and get request timed out. At that point I see outbound traffic allowed on the Zyxel firewall but nothing coming back. I'm past my understanding of routing and VMWare so am not sure how to tie down where my problem lies (or even if this setup is possible). So any help massively appreciated. Paul

  Read the article

• KVM Guest not reachable from host

  - by Paul

  Hello, I'm running Ubuntu server 9.10, installed KVM etc. Created the bridge network following instructions on help.ubuntu.com/community/KVM/Networking Created a windows 2008 guest using virt-install command line (using virt-manager GUI from a remote Ubuntu desktop would not let me select the ISO location). I can however use a remote virt-manager to connect to the guest and complete the windows install. Within windows 2008 I changed the IP address but cannot ping from outside world. The bridge network appears fine - I'm not sure what else to look at! Here is the interfaces file: The loopback network interface auto lo iface lo inet loopback The primary network interface auto eth0 iface eth0 inet manual # auto br0 iface br0 inet static address 60.234.64.50 netmask 255.255.255.248 network 60.234.0.0 broadcast 60.234.0.255 gateway 60.234.64.49 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 auto eth1 iface eth1 inet static address 192.168.12.2 netmask 255.255.255.0 broadcast 192.168.12.255 The ip of the windows server is 60.234.64.52 What else should I check? Regards Paul.

  Read the article

• Apache - building extensions with apxs

  - by Brian

  Hello, Pardon the newbie question - I haven't worked with manually compiling Apache modules (or anything) before. I am trying to get the mod_concat module going. It seems simple enough - just requires downloading the mod_concat.c file and then running: axps -c mod_concat.c This is new to me. Does it matter which directory I put mod_concat.c before running this command? I ran it from my home directory, and I see some new files - mod_concat.la, mod_concat.lo, mod_concat.o, and mod_concat.slo - along with a new subfolder called .libs/ that contains mod_concat.so along with some other files. I'm not sure where to go from here, I have a feeling these files were created in the wrong place. Don't I need mod_concat.so to be in my apache modules directory with the rest? Thanks for the help, Brian

  Read the article

• Silverlight Version 4 latest build for Win7 64bit and WinXP 32bit

  - by Paul

  I have a requirement where a few people need the latest version of Silverlight 4 installed. I know the latest version is 5.xx... but apparently with some new software we're having installed we have to use version 4 After a bit of googling i can see that the latest version is... Build 4.1.10329.0 Released May 8, 2012 We have a mix of Win7 64-bit machines and WinXP 32-bit machines. Q: Is there a different version for each OS or the same one fits all. (This seems strangely hard to decipher by googling) Q: Does anyone know where i can download the latest version 4? Microsoft do not seem to offer it anymore unless i'm just not finding it. Q: Is there a separate browser version of it or will installing it also handle any browser needs (our new software will be browser based) Any pointers much appreciated. Paul

  Read the article

• SQL 2008 publisher -> SQL 2000 subscriber: Is a pull subscription possible for merge replication?

  - by Brian Dunzweiler

  I am trying to synchronize a SQL 2000 SP4 subscriber to a SQL 2008 publisher via a merge pull subscription. When the subscriber tries to run the merge agent, it fails the following error: The process could not connect to Distributor 'OH05DBS002\SAM_SSG_2008'. SQL Server does not exist or access denied. Has anyone had success with this setup? I was able to create and synchronize a push subscription so I know that communication works between the two, at least from 2008-2000. The lack of communication from 2000-2008 also affects the ability to create a linked server on the SQL 2000 subscriber. One other tidbit - I did install the SQL 2008 native client on the the 2000 box but it didn't help either. Before anyone asks, I can't upgrade the subscriber as it still needs to support replication between MS Access 2003. Yeah, I know. :) TIA, Brian

  Read the article

• Cached Network Share Credentials?

  - by Brian Wolfe

  Hi, I have an issue in Windows 7 where I get the following error message when attempting to access an admin network share on a machine in another domain: "Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again." Troubleshooting I've Done Start Run cmd net use * /DELETE Start Manage Windows Credentials Deleted all credentials I still receive the same error until I reboot my machine. After I reboot, it works fine. However, I am able to log into the admin share if I hit it by it's IP address. QUESTION My question is, is there somewhere else I should be looking for cached user credentials? Thanks, Brian

  Read the article

• Connecting my iPhone to iTunes causes my Acer laptop to crash

  - by Paul Sheldrake

  Hello I have an Acer Travelmate 8200 laptop and whenever I connect my Iphone to it, it crashes with the BSOD(Blue Screen Of Death). I have figured out that if I delete all the pictures in my phone I can get it to connect but that is not a ideal long term solution. I also read that it may be a conflict with the built in web-cam I have but I've upgraded the driver and I still get the crashing problem. Any suggestions would be appreciated! Thanks Paul! edit: Here is the BSOD message I get

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >