Search Results

Search found 45382 results on 1816 pages for 'two factor authentication'.

Page 60/1816 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

  • What is the advantage to using a factor of 1024 instead of 1000 for disk size units?

    - by Joe Z.
    When considering the disk space of a storage medium, normally the computer or operating system will represent it in terms of powers of 1024 - a kilobyte is 1,024 bytes, a megabyte is 1,048,576 bytes, a gigabyte is 1,073,741,824 bytes, and so on. But I don't see any practical reason why this convention was adopted. Usually when disk size is represented in kilo-, mega-, or giga-bytes, it has to be converted into decimal first. In places where a power-of-two byte count actually matters (like the block size on a file system), the size is given in bytes anyway (e.g. 4096 bytes). Was it just a little aesthetic novelty that computer makers decided to adopt, but storage medium vendors decided to disregard? Whenever you buy a hard drive, there's always a disclaimer nowadays that says "One gigabyte means one billion bytes". It would feel like using the binary definition of "gigabyte" would artificially inflate the byte count of a device, making drive-makers have to pack 1.1 terabytes into a drive in order to have it show up as "1 TB", or to simply pack 1 terabyte in and have it show up as "931 GB" (and most of them do the latter). Some people have decided to use units like "KiB" or "MiB" in favour of "KB" and "MB" in order to distinguish the two. But is there any merit to the binary prefixes in the first place? There's probably a bit of old history I'm not aware of on this topic, and if there is, I'm looking for somebody to explain it. (Apologies if this is in the wrong place. I felt that a question on best practice might belong here, but I have faith that it will be migrated to the right place if it's incorrect.)

    Read the article

  • 407 Proxy Authentication Required

    - by Hemant Kothiyal
    I am working on a website, in which I am retrieving XML data from an external URL, using the following code WebRequest req = WebRequest.Create("External server url"); req.Proxy = new System.Net.WebProxy("proxyUrl:8080", true); req.Proxy.Credentials = CredentialCache.DefaultCredentials; WebResponse resp = req.GetResponse(); StreamReader textReader = new StreamReader(resp.GetResponseStream()); XmlTextReader xmlReader = new XmlTextReader(textReader); XmlDocument xmlDoc = new XmlDocument(); xmlDoc.Load(xmlReader); This code is working fine on my development PC (Windows XP with .Net 3.5) But when I deploy this code to IIS (Both at Windows XP and at Windows Server 2003) it's giving me following error "The remote server returned an error: (407) Proxy Authentication Required." Sometimes it gives me "The remote server returned an error: (502) Bad Gateway." Following code is from my web.config <system.net> <defaultProxy> <proxy usesystemdefault="False" proxyaddress ="http://172.16.12.12:8080" bypassonlocal ="True" /> </defaultProxy> </system.net> Please help me ? [Edit] Even when i run the website for devlopment PC but through IIS it gives me error "The remote server returned an error: (407) Proxy Authentication Required." But when i run website from Microsoft Devlopment server, it is running fine

    Read the article

  • How to handle correctly HTTP Digest Authentication on iPhone

    - by Fabiano Francesconi
    Hello guys. I'm trying to upload a file onto my personal server. I've written a small php page that works flawlessy so far. The little weird thing is the fact that I generate all the body of the HTTP message I'm going to send (let's say that amounts to ~4 mb) and then I send the request to my server. The server, then, asks for an HTTP challenge and my delegate connection:didReceiveAuthenticationChallenge:challenge replies to the server with the proper credentials and the data. But, what's happened? The data has been sent twice! In fact I've noticed that when I added the progressbar.. the apps sends the data (4mb), the server asks for authentication, the apps re-sends the data with the authentication (another 4mb). So, at the end, I've sent 8mb. That's wrong. I started googling and searching for a solution but I can't figure out how to fix this. The case scenarios are two (my guess): Share the realm for the whole session (a minimal HTTP request, then challenge, then data) Use the synchronized way to perform an HTTP connection (things that I do not want to do since it seems an ugly way to handle this kind of stuff to me) Thank you

    Read the article

  • How to connect to a queue manager with ssl enabled server connection channel when authentication is

    - by Dr. Xray
    I am trying to write a java application connecting to server connection channel with SSL enabled. So far, I have been successfully connected to the channel by setting authentication to 'optional'. However, when I set it to be 'required', the connection fails. Here is what I did: Create key db for queue manager and keystore for the java client user. Create key/self-signed certificates for the queue manager and the client user, with names prefixed ibmwebspheremq. Export, exchange and import certificates for the queue manager and the client. (I did answered 'yes' when being asked whether I trust the queue manager cert). The location and password to the truststore and keystore are set to point to the same keystore at the client side, where the orgininal created client user key and the imported queue manager key are. With other settings being the same, if I switch back to 'optional' authentication, the connection works. I think there is something I understand incorrectly about this ssl authenticaion but cannot figure out what. Could someone kindly help me?

    Read the article

  • Question about MySQLdb, OS X 10.5, and authentication

    - by timpone
    I'm a noob at Python and have been having problems with MySQLdb and OS X Leopard 10.5. I have a php app that is doing db access just fine with pdo but also want to access with Python. When I use the same credentials with MySQLdb as php, I get the following error: File "build/bdist.macosx-10.5-i386/egg/MySQLdb/connections.py", line 188, in __init__ _mysql_exceptions.OperationalError: (1045, "Access denied for user 'arc_db'@'localhost' (using password: YES)") The authentication piece works fine on my ubuntu server (installed via apt-get) implying that it is something specific to my OS X MySQLdb install. Looking at some postings, I thought it would be my local build of MySQLdb which seems to be problematic with OS X. But I am able to import fine: Python 2.5.1 (r251:54863, Feb 6 2009, 19:02:12) [GCC 4.0.1 (Apple Inc. build 5465)] on darwin Type "help", "copyright", "credits" or "license" for more information. >>> import MySQLdb >>> Also, wanting to create a positive, I am able to access and return results from a database tilted test_something (which presumably bypasses the MySQL's authtentication - not sure exactly how though). Trying to figure out a little more what is going on, I turn on logging for mysql and get the following (added my own comments): 100609 19:09:45 3 Connect Access denied for user 'arc_db'@'localhost' (using password: YES) //not worked 100609 19:10:02 4 Connect arc_db@localhost on arc_development //did work I'm not really sure what the 3 or 4 means but presumably a sucess or failue. So, I guess what would be the next step? Am I doing some obvious stupid python mistake (very likely)? Is there a better way for me to prove that this should / can be working? Is there any way to determine what MySQLdb is sending exactly in its authentication message to MySQL? thanks

    Read the article

  • Authentication Error 401.2

    - by priya2010
    I have an application buit partially in classic asp and in c#. The authentication used as per the config file is windows. This is perfectly working. Now I have to authenticate the users against active directory. (ie. if any AD users requesting my application, it should authenticate the user (on login page load) and redirect to the application home page instead of showing login page) The login page is an asp page and I created an aspx page where the login.asp page will be redirected during page load to autheticate with Active Directory. I hav e disabled anonymous access in IIS and currently used only Integrated Windows Authentication. Also given permission to "Authenticated Users" in Permissions. While trying to access the login.asp page I am getting the following error. You do not have permission to view this directory or page using the credentials that you supplied because your Web browser is sending a WWW-Authenticate header field that the Web server is not configured to accept. Please try the following: Contact the Web site administrator if you believe you should be able to view this directory or page. Click the Refresh button to try again with different credentials. HTTP Error 401.2 - Unauthorized: Access is denied due to server configuration. Internet Information Services (IIS) Kindly help me to fix this issue. Thanks, Priya

    Read the article

  • CURL - Problem with Authentication

    - by danit
    I need to add authentication to this function: function multiRequest($data, $options = array()) { // array of curl handles $curly = array(); // data to be returned $result = array(); // multi handle $mh = curl_multi_init(); // loop through $data and create curl handles // then add them to the multi-handle foreach ($data as $id => $d) { $curly[$id] = curl_init(); $url = (is_array($d) && !empty($d['url'])) ? $d['url'] : $d; curl_setopt($curly[$id], CURLOPT_URL, $url); curl_setopt($curly[$id], CURLOPT_HEADER, 0); curl_setopt($curly[$id], CURLOPT_RETURNTRANSFER, 1); // post? if (is_array($d)) { if (!empty($d['post'])) { curl_setopt($curly[$id], CURLOPT_POST, 1); curl_setopt($curly[$id], CURLOPT_POSTFIELDS, $d['post']); } } // extra options? if (!empty($options)) { curl_setopt_array($curly[$id], $options); } curl_multi_add_handle($mh, $curly[$id]); } // execute the handles $running = null; do { curl_multi_exec($mh, $running); } while($running > 0); // get content and remove handles foreach($curly as $id => $c) { $result[$id] = curl_multi_getcontent($c); curl_multi_remove_handle($mh, $c); } // all done curl_multi_close($mh); return $result; } I'm looking to add authentication to this function, something along these lines? curl_setopt($curly[$id], CURLOPT_USERPWD, "$username:$password"); Anyone help?

    Read the article

  • Kerberos and/or other authentication systems - One time logon for all PHP scripts

    - by devviedev
    I'm managing a set of web apps, almost exclusively written in PHP, and would like to find an authentication platform to build a role-based authorization system on top of. Also, I'd like the authentication system to be extensible to use for, for example, system services (SSH, etc.) Here are some of the main characteristics I'm looking for, in order of importance: Easy PHP implementation (storing/reading easily roles, etc.). Redundant, if possible. If an auth system goes down everyone is not locked out. Has clients for Windows and Mac. Easy web-based administration (adding/removing users/roles, changing passwords). If not, I can build an administration system without too much effort. One-time log on. I'd also like, when an auth token is issued, to store the user's IP address and use that to authorize the user for some non web-based applications. For that reason, I'd like a desktop client to issue the token and revoke tokens when, for example, the user becomes idle at their workstation. I'm thinking Kerberos might be a solution, but what are other options?

    Read the article

  • TFS and Forms Authentication

    - by George
    I don't know squat about TFS, other than as a user who has performed simple check in/outs. I just installed it locally and would like to do joint development with a friend. I was having trouble making my TFS web site on port 8080 visible (the whole scoop is here if your interested) and I wonder if it could be related to the fact that TFS is probably using Windows Authentication to identify the user. Can TFS be set up to use forms authentication? We probably need to set up a VPN, though that's a learning curve too. To use TFS, do our machines have to belong to a domain? We're not admin types, though he is better than me, though I would be interested in any feedback or advice on which path is likely to pan out the best. I already got AxoSoft OneTime working in this type of an environment and it suits us well, but I am tempted at all the bells & whistles with TFS and the ability to tie tracked bug items to code changes. As far as finding a good way to share code, do sites like SourceForge allow one to keep code secure among members only?

    Read the article

  • How to make Facebook Authentication from Silverlight secure?

    - by SondreB
    I have the following scenario I want to complete: Website running some HTTP(S) services that returns data for a user. Same website is additionally hosting a Silverlight 4 app which calls these services. The Silverlight app is integrating with Facebook using the Facebook Developer Toolkit (http://facebooktoolkit.codeplex.com/). I have not fully decided whether I want Facebook-integration to be a "opt-in" option such as Spotify, or if I want to "lock" down my service with Facebook-only authentication. That's another discussion. How do I protect my API Key and Secret that I receive from Facebook in a Silverlight app? To me it's obvious that this is impossible as the code is running on the client, but is there a way I can make it harder or should I just live with the fact that third parties could potentially "act" as my own app? Using the Facebook Developer Toolkit, there is a following C# method in Silverlight that is executed from the JavaScript when the user has fully authenticated with Facebook using the Facebook Connect APIs. [ScriptableMember] public void LoggedIn(string sessionKey, string secret, int expires, long userId) { this.SessionKey = sessionKey; this.UserId = userId; Obvious the problem here is the fact that JavaScript is injection the userId, which is nothing but a simple number. This means anyone could potentially inject a different userId in JavaScript and have my app think it's someone else. This means someone could hijack the data within the services running on my website. The alternative that comes to mind is authenticating the users on my website, this way I'm never exposing any secrets and I can return an auth-cookie to the users after the initial authentication. Though this scenario doesn't work very well in an out-of-browser scenario where the user is running the Silverlight app locally and not from my website.

    Read the article

  • .NET 4.0 Forms Authentication change?

    - by James Koch
    I'm seeing some new behavior in Forms Authentication after upgrading to .NET 4.0. This occurs only on IIS 6, not on 7. Background - In web.config, we configure Forms Authentication, and then use <authorization tags to globally deny anonymous/unauthenticated users access. Then we explicitly allow access to a login.aspx page using a <location tag. Generally, this works fine, as it did when we were on .NET 2.0 (3.5). The issue only occurs when we visit the root path of the site, ie "http://myserver/". Our default document is configured in IIS to be login.aspx. Under .NET 4.0, upon visiting that URL, we're redirected to "http://myserver/login.aspx?ReturnUrl=/". If you log in from here, you're logged in and returned back at the log in page (yuck). Just wanted to post this here to see if anyone else is experiencing this. It's not listed on any "breaking changes" documentation I've been able to find. Either I'm missing something, or the UrlAuthorization module has changed and is no longer "smart" about IIS default documents.

    Read the article

  • Caching Authentication Data

    - by PartlyCloudy
    Hi, I'm currently implementing a REST web service using CouchDB and RESTlet. The RESTlet layer is mainly for authentication and some minor filtering of the JSON data served by CouchDB: Clients <= HTTP = [ RESTlet <= HTTP = CouchDB ] I'm using CouchDB also to store user login data, because I don't want to add an additional database server for that purpose. Thus, each request to my service causes two CouchDB requests conducted by RESTlet (auth data + "real" request). In order to keep the service as efficent as possible, I want to reduce the number of requests, in this case redundant requests for login data. My idea now is to provide a cache (i.e.LRU-Cache via LinkedHashMap) within my RESTlet application that caches login data, because HTTP caching will probabily not be enough. But how do I invalidate the cache data, once a user changes the password, for instance. Thanks to REST, the application might run on several servers in parallel, and I don't want to create a central instance just to cache login data. Currently, I save requested auth data in the cache and try to auth new requests by using them. If a authentication fails or there is now entry available, I'll dispatch a GET request to my CouchDB storage in order to obtain the actual auth data. So in a worst case, users that have changed their data will perhaps still be able to login with their old credentials. How can I deal with that? Or what is a good strategy to keep the cache(s) up-to-date in general? Thanks in advance.

    Read the article

  • facebook authentication / login trouble

    - by salmane
    I have setup facebook authentication using php and it goes something like this first getting the authorization here : https://graph.facebook.com/oauth/authorize?client_id=<?= $facebook_app_id ?>&redirect_uri=http://www.example.com/facebook/oauth/&scope=user_about_me,publish_stream then getting the access Token here : $url = "https://graph.facebook.com/oauth/access_token?client_id=".$facebook_app_id."&redirect_uri=http://www.example.com/facebook/oauth/&client_secret=".$facebook_secret."&code=".$code;" function get_string_between($string, $start, $end){ $string = " ".$string; $ini = strpos($string,$start); if ($ini == 0) return ""; $ini += strlen($start); $len = strpos($string,$end,$ini) - $ini; return substr($string,$ini,$len); } $access_token = get_string_between(file_get_contents($url), "access_token=", "&expires="); then getting user info : $facebook_user = file_get_contents('https://graph.facebook.com/me?access_token='.$access_token); $facebook_id = json_decode($facebook_user)->id; $first_name = json_decode($facebook_user)->first_name; $last_name = json_decode($facebook_user)->last_name; this is pretty ugly ( in my opinion ) but it works....how ever....the user is still not logged in...because i did not create or retrieve any session variables to confirm that the user is logged in to facebook... which means that after getting the authentication done the use still has to login .... first: is there a better way using php to do what i did above ? second: how do i set/ get session variable / cookies that ensure that the user doesnt have to click login thanks for your help

    Read the article

  • http authentication fails in cucumber when adding @javascript tag

    - by JESii
    I have a feature in my Rials app that works just fine with the message "Responds to browser_basic_authorize" from the Background Given step. However, if I add a @javascript tag before the scenario, then my Background Given fails with "I don't know how to login". What's going wrong and how do I go about testing javascrpt interactions on my app? Background: Given I perform HTTP authentication as "<id>/<password>" When I go to the homepage Then I should see "Text-that-you-should-see-on-your-home-page" Scenario: Displaying injury causative factors Given I am on the new_incident_report page When I choose "incident_report_employee_following_procedures_true" Then I should see "Equipment failure?" Then I should not see "Lack of training" When /^I perform HTTP authentication as "([^\"]*)\/([^\"]*)"$/ do |username, password| puts "id/pswd: #{username}/#{password}" ### Following works ONLY if performed first before even going to a page!!! if page.driver.respond_to?(:basic_auth) puts 'Responds to basic_auth' page.driver.basic_auth(username, password) elsif page.driver.respond_to?(:basic_authorize) puts 'Responds to basic_authorize' page.driver.basic_authorize(username, password) elsif page.driver.respond_to?(:browser) && page.driver.browser.respond_to?(:basic_authorize) puts 'Responds to browser_basic_authorize' page.driver.browser.basic_authorize(username, password) else raise "I don't know how to log in!" end end Rails 3.0.9, current gems, other tests passing.

    Read the article

  • Login Problem Windows Authentication

    - by user109280
    Duplicate of: http://stackoverflow.com/questions/881928/windows-authentication-trusted-connection-problem I logged in the Windows Server(Machine 1) as "abc\user1 ". Windows Server machine is in abc domain. MSSQL Server is in the "abc" domain on Machine 1 and have mixed mode.authentication. It has account "abc\user1 " and "abc\user2 ". Both has role of sysadmin and serveradmin. I logged in another machine(Machine 2) using "abc\user2 ". Same Domain. Run the ant which connect to MSSQL Server. URL is formed as follows. jdbc:sqlserver://%DB_IP%:%DB_PORT%;SelectMethod=cursor;integratedSecurity=true;DatabaseName=dbname; 1) From Machine 2, If I use "abc\user2" credential for connection, then it works fine. since integratedSecurity=true. 2) From Machine 2, If I use "abc\user1" credential for connection, then it doesn't fine, since integratedSecurity=true and take System Credentials i.e "abc\user2". Even if I make integratedSecurity=false , then also it doesn't connect using "abc\user1" What changes to URL I have make to work for "abc\user1" from Machine2 for connection. what properties to be added in url? OR Driver doesn't support to use another domain\User Credentials? What need to set on MSSQL Server ?? Deepak

    Read the article

  • Integrated Windows authentication in IIS causing ADO.NET failure

    - by TrueWill
    We have a .NET 3.5 Web Service running under IIS. It must use identity impersonate="true" and Integrated Windows authentication in order to authenticate to third-party software. In addition, it connects to a SQL Server database using ADO.NET and SQL Server Authentication (specifying a fixed User ID and Password in the connection string). Everything worked fine until the database was moved to another SQL Server. Then the Web Service would throw the following exception: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) This error only occurs if identity impersonate is true in the Web.config. Again, the connection string hasn't changed and it specifies the user. I have tested the connection string and it works, both under the impersonated account and under the service account (and from both the remote machine and the server). What needs to be changed to get this to work with impersonation?

    Read the article

  • Codeigniter Inputting session data from model for a simple authentication system

    - by user1616244
    Trying to put together a simple login authentication. Been at this for quite sometime, and I can't find where I'm going wrong. Pretty new to Codeigniter and OOP PHP. I know there are authentication libraries out there, but I'm not interested in using those. Model: function login($username, $password){ if ($this->db->table_exists($username)){ $this->db->where('username', $username); $this->db->where('password', $password); $query = $this->db->get($username); if($query->num_rows >= 1) { return true; $data = array( 'username' => $this->input->post('username'), 'login' => true ); $this->session->set_userdata($data); } } } Controller function __construct(){ parent::__construct(); $this->logincheck(); } public function logincheck(){ if ($this->session->userdata('login')){ redirect('/members'); } } If I just echo from the controller: $this-session-all_userdata(); I get an empty array. So the problem seems to be that the $data array in the model isn't being stored in the session.

    Read the article

  • Cross-Application User Authentication

    - by Chris Lieb
    We have a webapp written in .NET that uses NTLM for SSO. We are writing a new webapp in Java that will tightly integrate with the original application. Unfortunately, Java has no support for performing the server portion of NTLM authentication and the only library that I can find requires too much setup to be allowed by IT. To work around this, I came up with a remote authentication scheme to work across applications and would like your opinions on it. It does not need to be extremely secure, but at the same time not easily be broken. User is authenticated into .NET application using NTLM User clicks link that leaves .NET application .NET application generates random number and stores it in the user table along with the user's full username (domain\username) Insecure token is formed as random number:username Insecure token is run through secure cipher (likely AES-256) using pre-shared key stored within the application to produce a secure token The secure token is passed as part of the query string to the Java application The Java application decrypts the secure key using the same pre-shared key stored within its own code to get the insecure token The random number and username are split apart The username is used to retrieve the user's information from the user table and the stored random number is checked against the one pulled from the insecure token If the numbers match, the username is put into the session for the user and they are now authenticated If the numbers do not match, the user is redirected to the .NET application's home page The random number is removed from the database

    Read the article

  • The Sound of Two Toilets Flushing: Constructive Criticism for Virgin Atlantic Complaints Department

    - by Geertjan
    I recently had the experience of flying from London to Johannesburg and back with Virgin Atlantic. The good news was that it was the cheapest flight available and that the take off and landing were absolutely perfect. Hence I really have no reason to complain. Instead, I'd like to offer some constructive criticism which hopefully Richard Branson will find sometime while googling his name. Or maybe someone from the Virgin Atlantic Complaints Department will find it, whatever, just want to put this information out there. Arrangement of restroom facilities. Maybe next time you design an airplane, consider not putting your toilets at a right angle right next to your rows of seats. Being able to reach, without even needing to stretch your arm, from your seat to close, yet again, a toilet door that someone, someone obviously sitting very far from the toilets, carelessly forgot to close is not an indicator of quality interior design. Have you noticed how all other airplanes have their toilets in a cubicle separated from the rows of seats? On those airplanes, people sitting in the seats near the toilets are not constantly being woken up throughout the night whenever someone enters/exits the toilet, whenever the light in the toilet is suddenly switched on, and whenever one of the toilets flushes. Bonus points for Virgin Atlantic passengers in the seats adjoining the toilets is when multiple toilets are flushed simultaneously and multiple passengers enter/exit them at the same time, a bit like an unasked for low budget musical of suddenly illuminated grumpy people in crumpled clothes. What joy that brings at 3 AM is hard to describe. Seats with extra leg room. You know how other airplanes have the seats with the extra leg room? You know what those seats tend to have? Extra leg room. It's really interesting how Virgin Atlantic's seats with extra leg room actually have no extra leg room at all. It should have been a give away, the fact that these special seats are found in the same rows as the standard seats, rather than on the cusp of real glory which is where most airlines put their extra leg room seats, with the only actual difference being that they have a slightly different color. Had you called them "seats with a different color" (i.e., almost not quite green, rather than something vaguely hinting at blue), at least I'd have known what I was getting. Picture the joy at 3 AM, rudely awakened from nightmarish slumber, partly grateful to have been released from a grayish dream of faceless zombies resembling one or two of those in a recent toilet line, by multiple adjoining toilets flushing simultaneously, while you're sitting in a seat with extra leg room that has exactly as much leg room as the seats in neighboring rows. You then have a choice of things to be sincerely annoyed about. Food from the '80's. In the '80's, airplane food came in soggy containers and even breakfast, the most important meal of the day, was a sad heap of vaguely gray colors. The culinary highlight tended to be a squashed tomato, which must have been mashed to a pulp with a brick prior to being regurgitated by a small furry animal, and there was also always a piece of immensely horrid pumpkin, as well as a slice of spongy something you'd never seen before. Sausages and mash at 6 AM on an airplane was always a heavy lump of horribleness. Thankfully, all airlines throughout the world changed from this puke inducing strategy around 1987 sometime. Not Virgin Atlantic, of course. The fatty sausages and mash are still there, bringing you flashbacks to Duran Duran, which is what you were listening to (on your walkman) the last time you saw it in an airplane. Even the golden oldie "squashed tomato attached by slime to three wet peas" is on the menu. How wonderful to have all this in a cramped seat with a long row of early morning bleariness lined up for the toilets, right at your side, bumping into your elbow, groggily, one by one, one after another, more and more, fumble-open-door-silence-flush-fumble-open-door, and on and on, while you tentatively push your fork through a soggy pile of colorless mush, fighting the urge to throw up on the stinky socks of whatever nightmarish zombie is bumping into your elbow at the time. But, then again, the plane landed without a hitch, in fact, extremely smoothly, so I'm certainly not blaming the pilots.

    Read the article

  • Take Two: Comparing JVMs on ARM/Linux

    - by user12608080
    Although the intent of the previous article, entitled Comparing JVMs on ARM/Linux, was to introduce and highlight the availability of the HotSpot server compiler (referred to as c2) for Java SE-Embedded ARM v7,  it seems, based on feedback, that everyone was more interested in the OpenJDK comparisons to Java SE-E.  In fact there were two main concerns: The fact that the previous article compared Java SE-E 7 against OpenJDK 6 might be construed as an unlevel playing field because version 7 is newer and therefore potentially more optimized. That the generic compiler settings chosen to build the OpenJDK implementations did not put those versions in a particularly favorable light. With those considerations in mind, we'll institute the following changes to this version of the benchmarking: In order to help alleviate an additional concern that there is some sort of benchmark bias, we'll use a different suite, called DaCapo.  Funded and supported by many prestigious organizations, DaCapo's aim is to benchmark real world applications.  Further information about DaCapo can be found at http://dacapobench.org. At the suggestion of Xerxes Ranby, who has been a great help through this entire exercise, a newer Linux distribution will be used to assure that the OpenJDK implementations were built with more optimal compiler settings.  The Linux distribution in this instance is Ubuntu 11.10 Oneiric Ocelot. Having experienced difficulties getting Ubuntu 11.10 to run on the original D2Plug ARMv7 platform, for these benchmarks, we'll switch to an embedded system that has a supported Ubuntu 11.10 release.  That platform is the Freescale i.MX53 Quick Start Board.  It has an ARMv7 Coretex-A8 processor running at 1GHz with 1GB RAM. We'll limit comparisons to 4 JVM implementations: Java SE-E 7 Update 2 c1 compiler (default) Java SE-E 6 Update 30 (c1 compiler is the only option) OpenJDK 6 IcedTea6 1.11pre 6b23~pre11-0ubuntu1.11.10.2 CACAO build 1.1.0pre2 OpenJDK 6 IcedTea6 1.11pre 6b23~pre11-0ubuntu1.11.10.2 JamVM build-1.6.0-devel Certain OpenJDK implementations were eliminated from this round of testing for the simple reason that their performance was not competitive.  The Java SE 7u2 c2 compiler was also removed because although quite respectable, it did not perform as well as the c1 compilers.  Recall that c2 works optimally in long-lived situations.  Many of these benchmarks completed in a relatively short period of time.  To get a feel for where c2 shines, take a look at the first chart in this blog. The first chart that follows includes performance of all benchmark runs on all platforms.  Later on we'll look more at individual tests.  In all runs, smaller means faster.  The DaCapo aficionado may notice that only 10 of the 14 DaCapo tests for this version were executed.  The reason for this is that these 10 tests represent the only ones successfully completed by all 4 JVMs.  Only the Java SE-E 6u30 could successfully run all of the tests.  Both OpenJDK instances not only failed to complete certain tests, but also experienced VM aborts too. One of the first observations that can be made between Java SE-E 6 and 7 is that, for all intents and purposes, they are on par with regards to performance.  While it is a fact that successive Java SE releases add additional optimizations, it is also true that Java SE 7 introduces additional complexity to the Java platform thus balancing out any potential performance gains at this point.  We are still early into Java SE 7.  We would expect further performance enhancements for Java SE-E 7 in future updates. In comparing Java SE-E to OpenJDK performance, among both OpenJDK VMs, Cacao results are respectable in 4 of the 10 tests.  The charts that follow show the individual results of those four tests.  Both Java SE-E versions do win every test and outperform Cacao in the range of 9% to 55%. For the remaining 6 tests, Java SE-E significantly outperforms Cacao in the range of 114% to 311% So it looks like OpenJDK results are mixed for this round of benchmarks.  In some cases, performance looks to have improved.  But in a majority of instances, OpenJDK still lags behind Java SE-Embedded considerably. Time to put on my asbestos suit.  Let the flames begin...

    Read the article

  • Two Values Enter, One Value Leaves

    - by Bunch
    This is a fairly easy way to compare values for two different controls. In this example a user needs to enter in a street address and zip code OR pick a county. After that the application will display location(s) based on the value. The application only wants a specific street/zip combination or a county, not both. This code shows how to check for that on an ASP.Net page using some JavaScript. The control code: <table>     <tr>         <td>             <label style="color: Red;">Required Fields</label>         </td>         <td style="width: 300px;">             <label style="color: Red; font-weight: bold;" id="reqAlert" ></label>         </td>     </tr>     <tr>         <td>             <asp:Label ID="Label3" runat="server" Text="Street Address"></asp:Label>         </td>         <td style="width: 200px;">             <input id="Street" type="text" style="width: 200px;" />         </td>     </tr>      <tr>         <td>             <asp:Label ID="Label5" runat="server" Text="Zip Code"></asp:Label>             &nbsp;         </td>         <td style="width: 200px;">             <input id="Zip" type="text" style="width: 200px;"/>         </td>     </tr>     <tr>         <td>             <label style="color: Red; font-size: large;">-- OR --</label>         </td>     </tr>     <tr>         <td>             <asp:Label ID="Label2" runat="server" Text="County"></asp:Label>         </td>         <td style="width: 200px;">             <asp:DropDownList ID="ddlCounty" runat="server">                 <asp:ListItem Value="0" Text="" />                 <asp:ListItem Value="1" Text="County A" />                 <asp:ListItem Value="2" Text="County B" />                 <asp:ListItem Value="3" Text="County C" />                                </asp:DropDownList>         </td>     </tr> </table> <input id="btnMapSearch" type="button" value="Search" onclick="requiredVal()" class="actionButton" /> The onclick for the button runs the requiredVal javascript function. That is where the checks take place. If only one item (street/zip or county) has been entered the application will carry on with it’s locateAddr function; otherwise it will show an error message in the label reqAlert. The javascript: function requiredVal() {     var street = document.getElementById("Street").value;     var zip = document.getElementById("Zip").value;     var countyDdl = document.getElementById("ctl00_Content_ddlCounty");     var county = countyDdl.options[countyDdl.selectedIndex].text;     var reqAlert = document.getElementById("reqAlert");     reqAlert.innerHTML = '';   //clears out any previous messages     if (street != '' || zip != '') {         if (county != '') {             reqAlert.innerHTML = 'Please select only one required option';  //values for both were entered         }         else {             locateAddr();         }     }     else if (street == '' && zip == '' && county == '') {         reqAlert.innerHTML = 'Please select a required option';  //no values entered     }     else {         locateAddr();     } } Technorati Tags: ASP.Net,JavaScript

    Read the article

  • ASP.Net FormsAuthentication Redirect Loses the cookie between Redirect and Application_AuthenticateR

    - by Joel Etherton
    I have a FormsAuthentication cookie that is persistent and works independently in a development, test, and production environment. I have a user that can authenticate, the user object is created, the authentication cookie is added to the response: 'Custom object to grab the TLD from the url authCookie.Domain = myTicketModule.GetTopLevelDomain(Request.ServerVariables("HTTP_HOST")) FormsAuthentication.SetAuthCookie(authTicket.Name, False) Response.SetCookie(authCookie) The user gets processed a little bit to check for a first time login, security questions, etc, and is then redirected with the following tidbit: Session.Add("ForceRedirect", "/FirstTimeLogin.aspx") Response.Redirect("~/FirstTimeLogin.aspx", True) With a debug break, I can verify that the cookie collection holds both a cookie not related to authentication that I set for a different purpose and the formsauthentication cookie. Then the next step in the process occurs at the ApplicationAuthenticateRequest in the global.asax: Sub Application_AuthenticateRequest(ByVal sender As Object, ByVal e As EventArgs) Dim formsCookieName As String = myConfigurationManager.AppSettings("FormsCookieName") Dim authCookie As HttpCookie = Request.Cookies(formsCookieName) At this point, for this ONE user authCookie is nothing. I have 15,000 other users who are not impacted in this manner. However, for one user the cookie just vanishes without a trace. I've seen this before with w3wp.exe exceptions, state server exceptions and other IIS process related exceptions, but I'm getting no exceptions in the event log. w3wp.exe is not crashing, the state server has some timeouts but they appear unrelated (as verified by timestamps) and it only happens to this one user on this one domain (this code is used across 2 different TLDs with approximately 10 other subdomains). One avenue I'm investigating is that the cookie might just be too large. I would think that there would be a check for the size of the cookie going into the response, and I wouldn't think it would impact it this way. Any ideas why the request might dumping the cookie? NOTE: The secondary cookie I mentioned that I set also gets dumped (and it's very tiny). EDIT-NOTE: The session token is NOT lost when this happens. However, since the authentication cookie is lost, it is ignored and replaced on a subsequent login.

    Read the article

  • Why would Basic Auth not work with my WCF client to Java SOAP Web Service?

    - by orj
    I have a Java based web service that requires basic authentication to communicate with it. If I type the WSDL url into my browser I'm prompted for Basic Auth. Which I can get by entering the correct credentials. However using my WCF client doesn't work. I construct my WCF client like this: var binding = new BasicHttpBinding { MaxReceivedMessageSize = 2048 * 10240, Security = { Mode = BasicHttpSecurityMode.TransportCredentialOnly, Transport = { ClientCredentialType = HttpClientCredentialType.Basic, Realm = "MYREALM", ProxyCredentialType = HttpProxyCredentialType.None }, Message = { ClientCredentialType = BasicHttpMessageCredentialType.UserName, AlgorithmSuite = SecurityAlgorithmSuite.Default } } }; var client = new WebServiceClient(binding, endpoint); client.ClientCredentials.UserName.UserName = username; client.ClientCredentials.UserName.Password = password; client.DoWebServiceMethod(); I get the following exception. System.Net.WebException: The remote server returned an error: (401) Unauthorized. at System.Net.HttpWebRequest.GetResponse() at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout) System.ServiceModel.Security.MessageSecurityException: The HTTP request is unauthorized with client authentication scheme 'Basic'. The authentication header received from the server was 'Basic realm="MYREALM"'. From what I can tell I'm doing things right. Where am I going wrong?

    Read the article

  • Different users get the same value in .ASPXANONYMOUS

    - by Malcolm Frexner
    My site allows anonymous users. I saw that under heavy load user get sometimes profile values from other users. This happens for anonymous users. I logged the access to profile data: /// <summary> /// /// </summary> /// <param name="controller"></param> /// <returns></returns> public static string ProfileID(this Controller controller ) { if (ApplicationConfiguration.LogProfileAccess) { StringBuilder sb = new StringBuilder(); (from header in controller.Request.Headers.ToPairs() select string.Concat(header.Key, ":", header.Value, ";")).ToList().ForEach(x => sb.Append(x)); string log = string.Format("ip:{0} url:{1} IsAuthenticated:{2} Name:{3} AnonId:{4} header:{5}", controller.Request.UserHostAddress, controller.Request.Url.ToString(), controller.Request.IsAuthenticated, controller.User.Identity.Name, controller.Request.AnonymousID, sb); _log.Debug(log); } return controller.Request.IsAuthenticated ? controller.User.Identity.Name : controller.Request.AnonymousID; } I can see in the log that user realy get the same cookievalue for .ASPXANONYMOUS even if they have different IP. Just to be safe I removed dependency injection for the FormsAuthentication. I dont use OutputCaching. My web.config has this setting for authentication: <anonymousIdentification enabled="true" cookieless="UseCookies" cookieName=".ASPXANONYMOUS" cookieTimeout="30" cookiePath="/" cookieRequireSSL="false" cookieSlidingExpiration="true" /> <authentication mode="Forms"> <forms loginUrl="~/de/Account/Login" /> </authentication> Does anybody have an idea what else I could log or what I should have a look at?

    Read the article

  • Error getting twitter request token using OAuth and PEAR Services_Twitter

    - by Onema
    Hello, I am moving from the basic authentication method using username and password to the OAuth based authentication. I was using an old version of the pear package Services_Twitter, that did not support OAuth. The latest version of this package supports OAuth authentications, it has a few dependencies (HTTP_Request2, HTTP_OAuth). It was very simple to install them and upgrade the package. I did all this my local machine and had no trouble getting the authentication up and running. I committed this code to the test site, but every time the code request a "request token" I get the following error message "Unable to connect to ssl://api.twitter.com:443. Error #0" I have spend 6 hours making sure that all the pear packages where up to date, checking the customer token and token secret, making sure port 443 is not closed... in addition to various other test. I have exhausted my resources and I come to you in hope to find some answers. Thank you PD: One of the things I do not understand is why does the message says that the url is ssl://api.twitter.com:443 rather than https://api.twitter.com/request_token? the former one is the one I am using to get the request token.

    Read the article

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >