Search Results

Search found 26297 results on 1052 pages for 'unit test'.

Page 605/1052 | < Previous Page | 601 602 603 604 605 606 607 608 609 610 611 612  | Next Page >

• Problem with switch dell 6224

  - by Matias

  Hello, we just have upgraded the firmware of a dell 6224 power connect switch and it won't reload. These are the symptons: - I power up the switch having the serial cable connected to it and the switch outputs nothing. The configuration of the serial console is fine: 9600 bds, etc... In fact, before the upgrade, I was connected to the switch through the very same cable. - Reseting the switch with its reset pinhole does not reset the switch: the power and fan lights powers off while I keep pressed the pinhole, but the switch itself does not resets. - When I connect an UTP cable to one of the switches port, the green lights don't flash, but ''mii-tool eth0'' in my laptop shows there is link!! The only thing I see in the output, different from other upgrades I've done, is this line at the end: Erasing Boot Flash.....^^^^Done. Any help or idea will be more than welcome!! Thanks!! console#show version Image Descriptions image1 : image2 : Images currently available on Flash -------------------------------------------------------------------- unit image1 image2 current-active next-active 1 <none> 3.0.0.8 image2 image2 console#boot system image2 Activating image image2 .. console#update bootcode Update bootcode and reset (Y/N)? Updating boot code ... Extracting boot code from image... Erasing Boot Flash.....^^^^Done.

  Read the article

• Excel VBA: select every other cell in a row range to be copied and pasted vertically

  - by terry alexander

  i have a 2200+ page text file. It is delivered from a customer through a data exchange to us with astericks to separate values and tildes (~) to denote the end of a row. The file is sent to me as a text file in Word. Most rows are split in two (1 row covers a full line and part of a second line). i transfer segments (10 page chunks) of it at a time into Excel where, unfortunately, any zeroes that occur at the end of a row get discarded in the "text to columns" procedure. So, i eyeball every "long" row to insure that zeroes were not lost and manually re-enter any that were. Here is a small bit of sample data: SDQ EA 92 1551 378 1601 151 1603 157 1604 83 The "SDQ, EA, and 92" are irrelevant (artifacts of data transmission). i want to use Excel VBA to select 1551, 1601, 1603, and 1604 (these are store numbers) so that i can copy those values and transpose paste them vertically. i will then go back and copy 378, 151, 157, and 83 (sales values) so that i can transpose paste them next to the store numbers. The next two rows of data contain the same store numbers but give the corresponding dollar values. i will only need to copy the dollar values so they can be transpose pasted vertically next to unit values (e.g. 378, 151, 157, and 83). Just being able to put my cursor on the first cell of interest in the row and run a macro to copy every other cell would speed up my work tremendously. i have tried using activecell and offset references to select a range to copy but have not been successful. Does any have any suggestions for me? Thanks in advance for the help.

  Read the article

• CPU Temperature sensor wrong?

  - by Matias Nino

  Everest Ultimate is suddenly telling me that the CPU temperature (and core temps) for my E6850 Core 2 Duo is 72 degrees Celsius. When I stress-test the machine, the temp goes up to 91 degrees and the CPU actually throttles. System remains stable though. For over a year now, my CPU has run very cool (40's) with a large commercial copper heatsink/fan that I bought separately. To top it off, I removed the cover of the box and felt the cpu heatsink and it wasn't even warm. Is there such a thing as a CPU temp sensor showing the wrong readings? Any tips would help. UPDATE #1 Temp is also just as high in BIOS. So that leads me to believe it's a CPU seating issue (even though I used thermal paste to seat it two years ago when I built the machine) UPDATE #2 Well. I removed the heatsink and cleaned off the original thermal paste (which was somewhat crusty). I polished the surface, re-applied some new paste, and reseated the heat sink. After powering it up, there was no noticeable change in the temp - ideling at 74. Ran the stress test and it went up to 94 degrees before being 100% throttled. I let it sit at 94 degrees for 20 minutes straight and the computer didn't even flinch. I then immediately shut it off and opened the case and felt around. The heatsink was completely cold to the touch. Even the copper rods were cold. The area near contact with the CPU was slightly warm but not hot to touch. Then I ran REALTEMP, which is supposedly more accurate and it told me the CPU was at 104 degrees. (LOL) At this point, I'm thinking no doubt the cpu's sensor is wrong. Sidenote: the BIOS has the latest version so no option to flash there. Reverting hasn't been known to help from what I've read. What pisses me off is the false temps force the CPU to artificially throttle from 3GHz down to 2GHz and my CPU fan is cranking at full force all the time. Should I call intel and tell them to send me another E6850? SOLUTION UPDATE I switched the processor out with another one and got the same obscene temperatures with the new processor followed by a heatsink that was cool to touch. My suspicion in the heatsink was suddenly renewed. I swapped it out with the stock heatsink/fan and lo and behold the temperatures returned to the normal 35C-50C. Even though the thermal paste was visibly flattened out every time I removed it, it looks like the heatsink was still not pressing hard enough on the CPU to effectively conduct the heat. The heatsink is a Masscool 8Wa741, which screws into a standard position on a mount on the back of the MOBO. Only thing I can surmise after 2 years of use was that, over time, the heatsink pressure on the CPU gave way until the heat began to be ineffectively conducted. Lessons learned: Intel CPU's can run SUPER HOT (upwards of 95C) and still be stable. Heatsink's need to be VERY firmly pressed against the CPU to conduct heat.

  Read the article

• disk-to-disk backup without costly backup redundancy?

  - by AaronLS

  A good backup strategy involves a combination of 1) disconnected backups/snapshots that will not be affected by bugs, viruses, and/or security breaches 2) geographically distributed backups to protect against local disasters 3) testing backups to ensure that they can be restored as needed Generally I take an onsite backup daily, and an offsite backup weekly, and do test restores periodically. In the rare circumstance that I need to restore files, I do some from the local backup. Should a catastrophic event destroy the servers and local backups, then the offsite weekly tape backup would be used to restore the files. I don't need multiple offsite backups with redundancy. I ALREADY HAVE REDUNDANCY THROUGH THE USE OF BOTH LOCAL AND REMOTE BACKUPS. I have recovery blocks and par files with the backups, so I already have protection against a small percentage of corrupt bits. I perform test restores to ensure the backups function properly. Should the remote backups experience a dataloss, I can replace them with one of the local backups. There are historical offsite backups as well, so if a dataloss was not noticed for a few weeks(such as a bug/security breach/virus), the data could be restored from an older backup. By doing this, the only scenario that poses a risk to complete data loss would be one where both the local, remote, and servers all experienced a data loss in the same time period. I'm willing to risk that happening since the odds of that trifecta negligibly small, and the data isn't THAT valuable to me. So I hope I have emphasized that I don't need redundancy in my offsite backups because I have covered all the bases. I know this exact technique is employed by numerous businesses. Of course there are some that take multiple offsite backups, because the data is so incredibly valuable that they don't even want to risk that trifecta disaster, but in the majority of cases the trifecta disaster is an accepted risk. I HAD TO COVER ALL THIS BECAUSE SOME PEOPLE DON'T READ!!! I think I have justified my backup strategy and the majority of businesses who use offsite tape backups do not have any additional redundancy beyond what is mentioned above(recovery blocks, par files, historical snapshots). Now I would like to eliminate the use of tapes for offsite backups, and instead use a backup service. Most however are extremely costly for $/gb/month storage. I don't mind paying for transfer bandwidth, but the cost of storage is way to high. All of them advertise that they maintain backups of the data, and I imagine they use RAID as well. Obviously if you were using them to host servers this would all be necessary, but for my scenario, I am simply replacing my offsite backups with such a service. So there is no need for RAID, and absolutely no value in another layer of backups of backups. My one and only question: "Are there online data-storage/backup services that do not use redundancy or offer backups(backups of my backups) as part of their packages, and thus are more reasonably priced?" NOT my question: "Is this a flawed strategy?" I don't care if you think this is a good strategy or not. I know it pretty standard. Very few people make an extra copy of their offsite backups. They already have local backups that they can use to replace the remote backups if something catastrophic happens at the remote site. Please limit your responses to the question posed. Sorry if I seem a little abrasive, but I had some trolls in my last post who didn't read my requirements nor my question, and were trying to go off answering a totally different question. I made it pretty clear, but didn't try to justify my strategy, because I didn't ask about whether my strategy was justifyable. So I apologize if this was lengthy, as it really didn't need to be, but since there are so many trolls here who try to sidetrack questions by responding without addressing the question at hand.

  Read the article

• Why do we get a sudden spike in response times?

  - by Christian Hagelid

  We have an API that is implemented using ServiceStack which is hosted in IIS. While performing load testing of the API we discovered that the response times are good but that they deteriorate rapidly as soon as we hit about 3,500 concurrent users per server. We have two servers and when hitting them with 7,000 users the average response times sit below 500ms for all endpoints. The boxes are behind a load balancer so we get 3,500 concurrents per server. However as soon as we increase the number of total concurrent users we see a significant increase in response times. Increasing the concurrent users to 5,000 per server gives us an average response time per endpoint of around 7 seconds. The memory and CPU on the servers are quite low, both while the response times are good and when after they deteriorate. At peak with 10,000 concurrent users the CPU averages just below 50% and the RAM sits around 3-4 GB out of 16. This leaves us thinking that we are hitting some kind of limit somewhere. The below screenshot shows some key counters in perfmon during a load test with a total of 10,000 concurrent users. The highlighted counter is requests/second. To the right of the screenshot you can see the requests per second graph becoming really erratic. This is the main indicator for slow response times. As soon as we see this pattern we notice slow response times in the load test. How do we go about troubleshooting this performance issue? We are trying to identify if this is a coding issue or a configuration issue. Are there any settings in web.config or IIS that could explain this behaviour? The application pool is running .NET v4.0 and the IIS version is 7.5. The only change we have made from the default settings is to update the application pool Queue Length value from 1,000 to 5,000. We have also added the following config settings to the Aspnet.config file: <system.web> <applicationPool maxConcurrentRequestsPerCPU="5000" maxConcurrentThreadsPerCPU="0" requestQueueLimit="5000" /> </system.web> More details: The purpose of the API is to combine data from various external sources and return as JSON. It is currently using an InMemory cache implementation to cache individual external calls at the data layer. The first request to a resource will fetch all data required and any subsequent requests for the same resource will get results from the cache. We have a 'cache runner' that is implemented as a background process that updates the information in the cache at certain set intervals. We have added locking around the code that fetches data from the external resources. We have also implemented the services to fetch the data from the external sources in an asynchronous fashion so that the endpoint should only be as slow as the slowest external call (unless we have data in the cache of course). This is done using the System.Threading.Tasks.Task class. Could we be hitting a limitation in terms of number of threads available to the process?

  Read the article

• Time drift in Cloud Server - need to mainpulate GRUB config

  - by Aditya Advani

  We are hosting a VPS on a popular host and are experiencing a regular time drift of several minutes a day forward (approx 7). Linux Kernel: 2.6.18-164.11.1.el5 GNU/Linux Distro: CentOS release 5.4 (Final) We reached out to our hosting provider and their support advised us " This is a known issue with Cloud Servers. To fix this you will need to add one line to your grub config located at: /boot/grub/menu.lst The line you need to add is: noapic nolapic divider=10 nolapic_timer This should correct this issue. You will need to restart after this is added in. " Because I am wary of manipulating grub, mostly I'm terrified that our server may fail to restart - I ask you guys, the pro *nix admins - where exactly in this file does the recommended insertion below: # line from 1&1 for time syncing issue (Case 5163) noapic nolapic divider=10 nolapic_timer go? Please specify where exactly, and whether the order of commands is or is not important. Why is the block below "title CentOS ..." indented? If someone could give me an overview of how this works or point me to a resource that's easy to follow, that's what I'm looking for immediately, a light overview or basic understanding of what I;m doing. If GRUB and bootloaders are a deep dark treasure trove of kernel hacking or something, that's great well-recommended in-depth resources are also very welcome. This is my current /boot/grub/menu.lst # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file #boot=/dev/sda # serial --unit=0 --speed=57600 terminal --timeout=5 serial console timeout=5 title CentOS (2.6.18-164.11.1.el5) root (hd0,0) kernel /boot/vmlinuz-2.6.18-164.11.1.el5 ro root=/dev/hda1 console=tty0 console=tty initrd /boot/initrd-2.6.18-164.11.1.el5.img MOST IMPORTANT: I need to know where in the file above it is appropriate to paste the suggested line so I can confidently restart my VPS after manipulating GRUB config

  Read the article

• ZFS - Impact of L2ARC cache device failure (Nexenta)

  - by ewwhite

  I have an HP ProLiant DL380 G7 server running as a NexentaStor storage unit. The server has 36GB RAM, 2 LSI 9211-8i SAS controllers (no SAS expanders), 2 SAS system drives, 12 SAS data drives, a hot-spare disk, an Intel X25-M L2ARC cache and a DDRdrive PCI ZIL accelerator. This system serves NFS to multiple VMWare hosts. I also have about 90-100GB of deduplicated data on the array. I've had two incidents where performance tanked suddenly, leaving the VM guests and Nexenta SSH/Web consoles inaccessible and requiring a full reboot of the array to restore functionality. In both cases, it was the Intel X-25M L2ARC SSD that failed or was "offlined". NexentaStor failed to alert me on the cache failure, however the general ZFS FMA alert was visible on the (unresponsive) console screen. The zpool status output showed: pool: vol1 state: ONLINE scan: scrub repaired 0 in 0h57m with 0 errors on Sat May 21 05:57:27 2011 config: NAME STATE READ WRITE CKSUM vol1 ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 c8t5000C50031B94409d0 ONLINE 0 0 0 c9t5000C50031BBFE25d0 ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 c10t5000C50031D158FDd0 ONLINE 0 0 0 c11t5000C5002C823045d0 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 c12t5000C50031D91AD1d0 ONLINE 0 0 0 c2t5000C50031D911B9d0 ONLINE 0 0 0 mirror-3 ONLINE 0 0 0 c13t5000C50031BC293Dd0 ONLINE 0 0 0 c14t5000C50031BD208Dd0 ONLINE 0 0 0 mirror-4 ONLINE 0 0 0 c15t5000C50031BBF6F5d0 ONLINE 0 0 0 c16t5000C50031D8CFADd0 ONLINE 0 0 0 mirror-5 ONLINE 0 0 0 c17t5000C50031BC0E01d0 ONLINE 0 0 0 c18t5000C5002C7CCE41d0 ONLINE 0 0 0 logs c19t0d0 ONLINE 0 0 0 cache c6t5001517959467B45d0 FAULTED 2 542 0 too many errors spares c7t5000C50031CB43D9d0 AVAIL errors: No known data errors This did not trigger any alerts from within Nexenta. I was under the impression that an L2ARC failure would not impact the system. But in this case, it surely was the culprit. I've never seen any recommendations to RAID L2ARC. Removing the bad SSD entirely from the server got me back running, but I'm concerned about the impact of the device failure (and maybe the lack of notification from NexentaStor as well). Edit - What's the current best-choice SSD for L2ARC cache applications these days?

  Read the article

• Htpc aka "Media Center": cheap and *silent*?

  - by Unknown

  It may be me, or the place I live (Italy), but it seems pretty hard to get a build or a prebuilt nettop or a laptop that fits the need. I need something silent able to playback all h.264 fullhd content without stuttering, and well (and not loosing the hw acceleration because of softsubs...) silent not ugly silent and (possibly) cheap. I'm going the linux route, therefore i'm moving towards a cpu-based or nvida-integrated solution (i don't think ati hw accelerated playback - or the intel "hd" acceleration - is useable yet). Ion nettop; it's either the Acer Revo (but here it's incredibly pricey and it's hard to find the dualcore version) or the Asrock Ion 330, that in the current version is rated "silent" at 26Db. 26. Sounds pretty noisy to me!!! the previous version was even worse. was this product really aimed at htpc market?? the Dell Zino - i think it's ATI based unfortunately. Laptop: correct me if I'm wrong: sub 600€/$ units are quite loud under full load (because of the tiny fans). ULW laptops are indeed quite similar: tiniest fans = high pitched noise and the cpu still lacks power for non hd-accelerated video decoding Handmade build: little money can be saved with underpowered cpus, a low-midrange cpu would help in the case of non-hw-accelerated content the cases are quite pricey the PSU one has to get ranges between 100/150 €/$ minimum to keep the noise down a low-mid build, all included, sums up to over 650 €/$ for a still-looking-ugly-unit, without the blu-ray drive. Please help. What do you advise on this? ;) Am I ignoring laptops too much, maybe? Are low-priced Acers that noisy/high pitched under full load?

  Read the article

• How to deploy custom MBean to Tomcat?

  - by Christian

  Hi, I'm trying to deploy a custom mbean to a tomcat. This mbean is not part of a webapp. It should be instantiated when tomcat starts. My problem is, I can't find any complete documentation about how to deploy such a mbean. I'm getting different exceptions, depending on my configuration. Has anyone hints, a complete documentation or has implemented a mbean by himself and can post an example? I configured tomcat to read a configuration from his conf directory: <Engine name="Catalina" defaultHost="localhost" mbeansFile="${catalina.base}/conf/mbeans-descriptors.xml"> The content is as follows: <?xml version="1.0"?> <!-- <!DOCTYPE mbeans-descriptors PUBLIC "-//Apache Software Foundation//DTD Model MBeans Configuration File" "http://jakarta.apache.org/commons/dtds/mbeans-descriptors.dtd"> --> <!-- Descriptions of JMX MBeans --> <mbeans-descriptors> <mbean name="Performance" description="Caculate JVM throughput" type="Performance"> <attribute name="throughput" description="calculated throughput (ratio between gc times and uptime of JVM)" type="double" writeable="false"/> </mbean> </mbeans-descriptors> When name in the xml file and class name match, I get this excption: SEVERE: Error creating mbean Performance javax.management.MalformedObjectNameException: Key properties cannot be empty at javax.management.ObjectName.construct(ObjectName.java:467) at javax.management.ObjectName.<init>(ObjectName.java:1403) at org.apache.tomcat.util.modeler.modules.MbeansSource.execute(MbeansSource.java:202) at org.apache.tomcat.util.modeler.modules.MbeansSource.load(MbeansSource.java:137) at org.apache.catalina.core.StandardEngine.readEngineMbeans(StandardEngine.java:517) at org.apache.catalina.core.StandardEngine.init(StandardEngine.java:321) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:411) at org.apache.catalina.core.StandardService.start(StandardService.java:519) at org.apache.catalina.core.StandardServer.start(StandardServer.java:710) at org.apache.catalina.startup.Catalina.start(Catalina.java:581) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.commons.daemon.support.DaemonLoader.start(DaemonLoader.java:177) When changing the name attribute in the xml file to test.example:type=Performance, I get this exception: SEVERE: Error creating mbean test.example:type=Performance javax.management.NotCompliantMBeanException: MBean class must have public constructor at com.sun.jmx.mbeanserver.Introspector.testCreation(Introspector.java:127) at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.createMBean(DefaultMBeanServerInterceptor.java:284) at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.createMBean(DefaultMBeanServerInterceptor.java:199) at com.sun.jmx.mbeanserver.JmxMBeanServer.createMBean(JmxMBeanServer.java:393) at org.apache.tomcat.util.modeler.modules.MbeansSource.execute(MbeansSource.java:207) at org.apache.tomcat.util.modeler.modules.MbeansSource.load(MbeansSource.java:137) at org.apache.catalina.core.StandardEngine.readEngineMbeans(StandardEngine.java:517) at org.apache.catalina.core.StandardEngine.init(StandardEngine.java:321) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:411) at org.apache.catalina.core.StandardService.start(StandardService.java:519) at org.apache.catalina.core.StandardServer.start(StandardServer.java:710) at org.apache.catalina.startup.Catalina.start(Catalina.java:581) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.commons.daemon.support.DaemonLoader.start(DaemonLoader.java:177) The documentation from apache is not really helpful, as it just explains a small part. I'm aware of this question but it doesn't help me. The answer I gave worked just for a short time, after that I got some other exceptions. For additional info, the java interface public interface PerformanceMBean { public double getThroughput(); } and implementing class /* some import statements */ public class Performance implements PerformanceMBean { public double getThroughput() { ... } }

  Read the article

• Cannot join Win7 workstations to Win2k8 domain

  - by wfaulk

  I am trying to connect a Windows 7 Ultimate machine to a Windows 2k8 domain and it's not working. I get this error: Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt. DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "example.local": The query was for the SRV record for _ldap._tcp.dc._msdcs.example.local The following domain controllers were identified by the query: dc1.example.local dc2.example.local However no domain controllers could be contacted. Common causes of this error include: Host (A) or (AAAA) records that map the names of the domain controllers to their IP addresses are missing or contain incorrect addresses. Domain controllers registered in DNS are not connected to the network or are not running. The client is in an office connected remotely via MPLS to the data center where our domain controllers exist. I don't seem to have anything blocking connectivity to the DCs, but I don't have total control over the MPLS circuit, so it's possible that there's something blocking connectivity. I have tried multiple clients (Win7 Ultimate and WinXP SP3) in the one office and get the same symptoms on all of them. I have no trouble connecting to either of the domain controllers, though I have, admittedly, not tried every possible port. ICMP, LDAP, DNS, and SMB connections all work fine. Client DNS is pointing to the DCs, and "example.local" resolves to the two IP addresses of the DCs. I get this output from the NetLogon Test command line utility: C:\Windows\System32>nltest /dsgetdc:example.local Getting DC name failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN I have also created a separate network to emulate that office's configuration that's connected to the DC network via LAN-to-LAN VPN instead of MPLS. Joining Windows 7 computers from that remote network works fine. The only difference I can find between the two environments is the intermediate connectivity, but I'm out of ideas as to what to test or how to do it. What further steps should I take? (Note that this isn't actually my client workstation and I have no direct access to it; I'm forced to do remote hands access to it, which makes some of the obvious troubleshooting methods, like packet sniffing, more difficult. If I could just set up a system there that I could remote into, I would, but requests to that effect have gone unanswered.) 2011-08-25 update: I had DCDIAG.EXE run on a client attempting to join the domain: C:\Windows\System32>dcdiag /u:example\adminuser /p:********* /s:dc2.example.local Directory Server Diagnosis Performing initial setup: Ldap search capabality attribute search failed on server dc2.example.local, return value = 81 This sounds like it was able to connect via LDAP, but the thing that it was trying to do failed. But I don't quite follow what it was trying to do, much less how to reproduce it or resolve it. 2011-08-26 update: Using LDP.EXE to try and make an LDAP connection directly to the DCs results in these errors: ld = ldap_open("10.0.0.1", 389); Error <0x51: Fail to connect to 10.0.0.1. ld = ldap_open("10.0.0.2", 389); Error <0x51: Fail to connect to 10.0.0.2. ld = ldap_open("10.0.0.1", 3268); Error <0x51: Fail to connect to 10.0.0.1. ld = ldap_open("10.0.0.2", 3268); Error <0x51: Fail to connect to 10.0.0.2. This would seem to point fingers at LDAP connections being blocked somewhere. (And 0x51 == 81, which was the error from DCDIAG.EXE from yesterday's update.) I could swear I tested this using TELNET.EXE weeks ago, but now I'm thinking that I may have assumed that its clearing of the screen was telling me that it was waiting and not that it had connected. I'm tracking down LDAP connectivity problems now. This update may become an answer.

  Read the article

• How to get rid of a stubborn 'removed' device in mdadm

  - by T.J. Crowder

  One of my server's drives failed and so I removed the failed drive from all three relevant arrays, had the drive swapped out, and then added the new drive to the arrays. Two of the arrays worked perfectly. The third added the drive back as a spare, and there's an odd "removed" entry in the mdadm details. I tried both mdadm /dev/md2 --remove failed and mdadm /dev/md2 --remove detached as suggested here and here, neither of which complained, but neither of which had any effect, either. Does anyone know how I can get rid of that entry and get the drive added back properly? (Ideally without resyncing a third time, I've already had to do it twice and it takes hours. But if that's what it takes, that's what it takes.) The new drive is /dev/sda, the relevant partition is /dev/sda3. Here's the detail on the array: # mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Wed Oct 26 12:27:49 2011 Raid Level : raid1 Array Size : 729952192 (696.14 GiB 747.47 GB) Used Dev Size : 729952192 (696.14 GiB 747.47 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Tue Nov 12 17:48:53 2013 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 UUID : 2fdbf68c:d572d905:776c2c25:004bd7b2 (local to host blah) Events : 0.34665 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 19 1 active sync /dev/sdb3 2 8 3 - spare /dev/sda3 If it's relevant, it's a 64-bit server. It normally runs Ubuntu, but right now I'm in the data centre's "rescue" OS, which is Debian 7 (wheezy). The "removed" entry was there the last time I was in Ubuntu (it won't, currently, boot from the disk), so I don't think that's not some Ubuntu/Debian conflict (and they are, of course, closely related). Update: Having done extensive tests with test devices on a local machine, I'm just plain getting anomalous behavior from mdadm with this array. For instance, with /dev/sda3 removed from the array again, I did this: mdadm /dev/md2 --grow --force --raid-devices=1 And that got rid of the "removed" device, leaving me just with /dev/sdb3. Then I nuked /dev/sda3 (wrote a file system to it, so it didn't have the raid fs anymore), then: mdadm /dev/md2 --grow --raid-devices=2 ...which gave me an array with /dev/sdb3 in slot 0 and "removed" in slot 1 as you'd expect. Then mdadm /dev/md2 --add /dev/sda3 ...added it — as a spare again. (Another 3.5 hours down the drain.) So with the rebuilt spare in the array, given that mdadm's man page says RAID-DEVICES CHANGES ... When the number of devices is increased, any hot spares that are present will be activated immediately. ...I grew the array to three devices, to try to activate the "spare": mdadm /dev/md2 --grow --raid-devices=3 What did I get? Two "removed" devices, and the spare. And yet when I do this with a test array, I don't get this behavior. So I nuked /dev/sda3 again, used it to create a brand-new array, and am copying the data from the old array to the new one: rsync -r -t -v --exclude 'lost+found' --progress /mnt/oldarray/* /mnt/newarray This will, of course, take hours. Hopefully when I'm done, I can stop the old array entirely, nuke /dev/sdb3, and add it to the new array. Hopefully, it won't get added as a spare!

  Read the article

• Dual Xeon Server voltages are low

  - by Mindflux

  I've got a whitebox server running CentOS 5.7. It's a Dual Xeon 5620, 24GB of RAM. The mainboard is a SuperMicro X8DT6-F and the chassis is a SC825TQ-R720LPB. Dual 720W Power supplies. We had a big power outage a couple weeks back that took down everything, I don't have any pre-power outage figures for this server, and the only reason I noticed these is because when I was bringing up the servers I was checking them out with more scrutiny than usual. http://i.imgur.com/rSjiw.png (Image of voltage readings) As you can see, CPU1 DIMM is low, +3.3V is high, 3.3VSB is high, +5v is high, +12v is REAL LOW (out of normal 5% (plus/minus))... and VBAT is off the charts. With my whitebox VAR we've tried the following: Swap out PSU with another server I have with the same PSUs. Try different power cord Update BMC/IPMI firmware in case readings were wrong (They aren't) Update BIOS Try different PDU Try a different outlet and/or circuit Replaced Voltage Regulator Unit At this point, the only thing we haven't done, seemingly is replace the mainboard.. which is what the next step will be unless something else shines some light on the situation. I should mention the system is rock solid otherwise which is a surprise given the 12v voltage is that far off.

  Read the article

• Symantec Endpoint Protection Virus Definitions

  - by Gus Denton

  I have done some Googling but I cannot get a definitive answer certainly not from the Symantec KB. I have a Virtualised Win 2003R2 server 32bit. It has been provisioned to me with Symantec Endpoint Protection 11.0.62xxx CLIENT (not a definitions server) the directory C:\Program Files\Common Files\Symantec Shared\VirusDefs is 750MB IT doesn't contain .tmp directories so it is NOT a corrupt definitions server. IT does contain directories named with a date pattern YYYYMMDD.xxx Some of these folders are 12 months old and I would like to recover the space. The sysmantect forums are full of this stuff but a lot of the postings contain links back to documents that are not specific to End Point Protection Client. It appears that I should be able to delete the older folders and all will be OK. with a service restart however there is a warning about having Live Update Administrator Installed Firstly I have no idea if I have this installed how to I check and secondly can I just ditch these old files and restart ? Regards Gus Denton Learning and Teaching Uni of New South Wales Sydney Australia For those trying to assist me I thankyou. I have followed some instructions found on the Symantec site and assumed that the response from Nixphoe would resolve my issue. It appears that as I am on a provisioned VM from a central IT unit I cannot run the Symantec commands from the Run prompt as my admin creds to get me in. (smc -stop) Basically I need to claw back some Diskspace from the c: drive which is being filed up with WSUS patches and Symantec files. I have managed to delete one symantec cache through the live update control panel and recovered 470Mb I suppose my last question for those more experienced than myself is, can I simply remove say the two oldest virus definition folders without completely foobaring the End Point protection and the server ? Regards Gus

  Read the article

• How to eliminate overscan on Ubuntu HTPC

  - by Norman Ramsey

  I'm using an Ubuntu box with Nvidia graphics card as an HTPC. My HDTV is a Sony Bravia KDS-R50XBR1; this is a rear-projection unit with many inputs. I am using the HDMI input. I'm using the proprietary Nvidia drivers and they recognize the 1080x1920 resolution just fine. The display is a little fuzzy but at 50 inches it's perfect for movies. My problem is that the TV has three overscan settings, and none of them reduces overscan to zero. When I was using dual-screen this was fine, but I'm moving to where the TV is my only screen, and the Gnome panels are not visible because of the overscan. I'd like to figure out how to eliminate the overscan, without trying to scale my 1080p content down to 920p or something ridiculous like that. Ideally there would be some scurvy trick, perhaps involving the TV service menu, to get rid of the overscan on the TV side. Or I could move the Gnome panels, but I still would be missing the edges of my movies. Suggestions most welcome.

  Read the article

• package issue with ubuntu 10.10 and passenger requirements

  - by user368937

  I'm trying to get Passenger working with Ubuntu 10.10 and I'm running into a problem. It seems that the passenger installer is not recognizing the virtual package. I'm getting this error: Code: passenger-install-apache2-module ... * OpenSSL support for Ruby... not found ... And then it says, run this: * To install OpenSSL support for Ruby: Please run apt-get install libopenssl-ruby as root. When I run the above command, it refers to the libruby package: sudo apt-get install libopenssl-ruby Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting 'libruby' instead of 'libopenssl-ruby' libruby is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 43 not upgraded. When I look at the details for libruby, it says it provides libopenssl-ruby: Code: Provides: libbigdecimal-ruby, libcurses-ruby, libdbm-ruby, libdl-ruby, libdrb-ruby, liberb-ruby, libgdbm-ruby, libiconv-ruby, libopenssl-ruby, libpty-ruby, libracc-runtime-ruby, libreadline-ruby, librexml-ruby, libsdbm-ruby, libstrscan-ruby, libsyslog-ruby, libtest-unit-ruby, libwebrick-ruby, libxmlrpc-ruby, libyaml-ruby, libzlib-ruby And when I rerun the passenger installer, it gives the same error: Code: passenger-install-apache2-module ... * OpenSSL support for Ruby... not found ... Let me know if you need more info. How do I fix this?

  Read the article

• Does a 3ware "ECC-ERROR" matter on a JBOD when I have ZFS?

  - by Stefan Lasiewski

  I have a FreeBSD 8.x machine running ZFS and with a 3ware 9690SA controller. The 3ware controller shows an ECC-ERROR with one of the disks: //host> /c0 show VPort Status Unit Size Type Phy Encl-Slot Model ------------------------------------------------------------------------------ p0 OK u0 279.39 GB SAS 0 - SEAGATE ST3300657SS p1 OK u0 279.39 GB SAS 1 - SEAGATE ST3300657SS p2 OK u1 931.51 GB SAS 2 - SEAGATE ST31000640SS p3 ECC-ERROR u2 931.51 GB SAS 3 - SEAGATE ST31000640SS p4 OK u3 931.51 GB SAS 4 - SEAGATE ST31000640SS /c0 show events shows no ECC errors in it's recent history. ZFS does not currently detect any errors. zpool status says No known data errors My question: Is this ECC-ERROR something that I need to be concerned about? According to the 3ware CLI 9.5.2 Manual, an ECC-ERROR means that the 3ware controller caught a read-error for one or more sectors on this drive. This sometimes occurs when a RAID array is recovering from a failed disk. I believe that ECC-ERRORS can also be detected when the 3ware Controller verifies each disk. None of the drives have failed and thus there was no drive rebuild, so I assume that 3ware discovered a bad sector when it ran it's weekly auto-verify scan of the disks. Is this a safe assumption? According to our logs, ZFS has not detected any bad sectors on this drive. ZFS can work around read errors -- if ZFS detects a bad sector on the drive, it will simply mark that sector as bad and never use it again. From the ZFS perspective one bad sector isn't a big deal, although it might indicate that the drive is starting to go bad.

  Read the article

• Failed to mount to nfs server with "Program not Registered"

  - by Farrel

  I'm trying to setup nfs server on Fedora 17 and I'm getting "Program not Registered" error when I'm trying to mount. I guess the main reason for this is rpcbind. I'm a newbie in linux, so I don't know what info should I provide you with. Here is some info that might be useful. rpcinfo -p program vers proto port service 100000 4 tcp 111 portmapper 100000 3 tcp 111 portmapper 100000 2 tcp 111 portmapper 100000 4 udp 111 portmapper 100000 3 udp 111 portmapper 100000 2 udp 111 portmapper 100005 1 udp 20048 mountd 100005 1 tcp 20048 mountd 100005 2 udp 20048 mountd 100005 2 tcp 20048 mountd 100005 3 udp 20048 mountd 100005 3 tcp 20048 mountd 100024 1 udp 42223 status 100024 1 tcp 50054 status cat /etc/exports /home/Farrel/prog 192.168.xxx.xxx (ro,sync) service nfs status Redirecting to /bin/systemctl status nfs.service nfs-server.service - NFS Server Loaded: loaded (/usr/lib/systemd/system/nfs-server.service; enabled) Active: active (exited) since Fri, 02 Nov 2012 09:29:04 +0300; 5min ago Process: 924 ExecStartPost=/usr/lib/nfs-utils/scripts/nfs-server.postconfig (code=exited, status=0/SUCCESS) Process: 909 ExecStart=/usr/sbin/rpc.nfsd $RPCNFSDARGS ${RPCNFSDCOUNT} (code=exited, status=0/SUCCESS) Process: 885 ExecStartPre=/usr/sbin/exportfs -r (code=exited, status=0/SUCCESS) Process: 864 ExecStartPre=/usr/lib/nfs-utils/scripts/nfs-server.preconfig (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/nfs-server.service Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable. Firewall is disabled on both systems. I spent a lot of time reading on the topic but all manuals on setting up nfs server lead to "Program not Registered" error. Any how-to-fix-it ideas?

  Read the article

• How to diagnose computer lockup/freezing problem

  - by Scott Mitchell

  I built a desktop computer a couple years back with the following specs: CPU: Intel Core 2 Quad Q9300 Yorkfield 2.5GHz 6MB L2 Cache LGA 775 95W Quad-Core Processor BX80580Q9300 Motherboard: EVGA 122-CK-NF68-T1 LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard Video Card: Two EVGA 256-P2-N758-TR GeForce 8600GT SCC 256MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card PSU: SeaSonic S12 Energy Plus SS-550HT 550W ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Power Supply Memory: Two G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBPQ Since its inception, the machine has periodically locked up, the regularlity having varied over the years from once a day to once a month. Typically, lockups happen once every few days. By "lockup" I mean my computer just freezes. The screen locks up, I can't move the mouse. Hitting keys on my keyboard that normally turn LEDs on or off on the keyboard (such as Caps Lock) no longer turn the LEDs on or off. If there was music playing at the time of the lockup, noise keeps coming out of the speakers, but it's just the current frequency/note that plays indefinitely. There is no BSOD. When such a lockup occurs I have to do a hard reboot by either turning off the computer or hitting the reset button. I have the most recent version of the NVIDIA hardware drivers, and update them semi-regularly, but that hasn't seemed to help. I am currently using Windows 7 x64, but was previously using Windows Server 2003 x64 and having the same lockup issues. My guess is that it's somehow video driver or motherboard related, but I don't know how to go about diagnosing this problem to narrow down which of the two is the culprit. Additional information re: cooling Regarding cooling... I've not installed any after-market cooling systems aside from two regular fans I scavenged from an older computer. The fan atop the CPU is the one that shipped with it. One of the two scavenged fans I added it located at the bottom tower of the corner, in an attempt to create some airflow from front to back. The second fan is pointed directly at the two video cards. SpeedFan installation and readings Per studiohack's suggestion, I installed SpeedFan, which provided the following temperature readings: GPU: 63C GPU: 65C System: 76C CPU: 64C AUX: 36C Core 0: 78C Core 1: 76C Core 2: 79C Core 3: 79C Update #3: Another Lockup :-( Well, I had another lockup last night. :-( SpeedFan reported the CPU temp at 38 C when it happened, and there was no spike in temperature leading up to the freeze. One thing I notice is that the freeze seems more likely to happen if I am watching a video. In fact, of the last 5 freezes over the past month, 4 of them have been while watching a video on Flickr. Not necessarily the same video, but a video nevertheless. I don't know if this is just coincidence or if it means anything. (As an aside, each night before bedtime my 2 year old daughter sits on my lap and watches some home videos on Flickr and, in the last month, has learned the phrase, "Uh oh, computer broke.") Update #4: MemTest86 and 3DMark06 Test Results: Per suggestions in the comments, I ran the MemTest86 overnight and it cycled through the 8 GB of memory 5 times without error. I also ran the 3DMark06 test without a problem (see my scores at http://3dmark.com/3dm06/15163549). So... what now? :-) Any further suggestions on what to check? Is there some way to get a stack trace or something when the computer locks like that? Thanks

  Read the article

• Cooling Server Closet - No A/C Is Possible

  - by JamesCo

  We're moving into a new office in an old building in London (that's England :) and are walling off a 2m x 1.3m area where the router & telephone equipment currently terminates to use as a server closet. The closet will contain: 2 24-port switches 1 router 1 VSDL modem 1 Dell desktop 1 4-bay NAS 1 HP micro-server 1 UPS Miscellaneous minor telephony boxes. There is no central A/C in the office and there never will be. We can install ducting to the outside quite easily - it's only a couple of metres to the windows, which face a courtyard. My question is whether installing an extractor fan with ducting to the window should be sufficient for cooling? Would an intake fan and intake duct (from the window, too) be required? We don't want to leave a gap in the closet door as that'll let noise out into the office. If we don't have to put a portable A/C unit into the closet, that'd be perfect. The office has about 12 people; London is temperate, average maximum in August is 31 Celsius, 25 Celsius is more typical. The same equipment runs fine in our current office (same building as new office, also no A/C) but it isn't in an enclosed space. I can see us putting say one Dell 2950 tower server into the closet, but no more than that. So, sustained power consumption in the closet would currently be about 800w (I'm guessing); possibly in the future 2kw. The closet will have a ceiling and no windows and be well-insulated. We don't care if the equipment runs hot, so long as it runs and we don't hear it.

  Read the article

• Convert mp4 video to a format xbox 360 can play

  - by Björn Lindqvist

  Here is a video file my Xbox 360 refuses to play: $ MP4Box -info video.mp4 * Movie Info * Timescale 90000 - Duration 02:18:33.365 Fragmented File no - 2 track(s) File Brand mp42 - version 0 Created: GMT Sat Jul 21 07:08:55 2012 File has root IOD (9 bytes) Scene PL 0xff - Graphics PL 0xff - OD PL 0xff Visual PL: ISO Reserved Profile (0x7f) Audio PL: High Quality Audio Profile @ Level 2 (0x0f) No streams included in root OD iTunes Info: Encoder Software: HandBrake 0.9.6 2012022800 Track # 1 Info - TrackID 1 - TimeScale 90000 - Duration 02:18:33.235 Media Info: Language "Undetermined" - Type "vide:avc1" - 199318 samples Visual Track layout: x=0 y=0 width=1280 height=688 MPEG-4 Config: Visual Stream - ObjectTypeIndication 0x21 AVC/H264 Video - Visual Size 1280 x 688 AVC Info: 1 SPS - 1 PPS - Profile High @ Level 4.1 NAL Unit length bits: 32 Self-synchronized Track # 2 Info - TrackID 2 - TimeScale 48000 - Duration 02:18:33.365 Media Info: Language "English" - Type "soun:mp4a" - 389689 samples MPEG-4 Config: Audio Stream - ObjectTypeIndication 0x40 MPEG-4 Audio MPEG-4 Audio AAC LC - 6 Channel(s) - SampleRate 48000 Synchronized on stream 1 $ avconv -i video.mp4 avconv version 0.8.4-4:0.8.4-0ubuntu0.12.04.1, Copyright (c) 2000-2012 the Libav developers built on Nov 6 2012 16:51:33 with gcc 4.6.3 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'video.mp4': Metadata: major_brand : mp42 minor_version : 0 compatible_brands: mp42isomavc1 creation_time : 2012-07-21 07:08:55 encoder : HandBrake 0.9.6 2012022800 Duration: 02:18:33.36, start: 0.000000, bitrate: 2299 kb/s Stream #0.0(und): Video: h264 (High), yuv420p, 1280x688, 1973 kb/s, 23.98 fps, 90k tbr, 90k tbn, 180k tbc Metadata: creation_time : 2012-07-21 07:08:55 Stream #0.1(eng): Audio: aac, 48000 Hz, 5.1, s16, 319 kb/s Metadata: creation_time : 2012-07-21 07:08:55 At least one output file must be specified What tool, such as ffmpeg or mencoder, and what magic command line incantation should I use to transcode this file into a format Xbox 360 can play? I want the transcode process to retain as good video quality as possible.

  Read the article

• Importing csv list of contacts into Exchange 2007 GAL and create Distribution Group

  - by Ken Ray

  Here's the situation: We have a list of about 1,000 contacts (Lawyers in the area our court serves) with name and email address. I've been asked to create an email distribution list that can be used to sent emails to all of the external users on that list. I've seen various articles using the Exchange Management Shell and the Import-csv command piped through a ForEach-Object to a New-MailContact to set up the contacts. However, Exchange Management Shell is rather unhelpful, and it isn't working. What I believe I need to do is: 1) Set up a new distribution group using the Exchange Management Console. Let's say this new distribution group (which appears in the list of Distribution Groups under Recipient Configuration) is called "FloridaBar". 2) Make sure I have a csv file of the information I want to import. 3) Open Exchange Management Shell, and enter the following command: Import-csv C:\filename.csv | ForEach-Object { New-MailContact -Name $."NameColumnName" -ExternalEmailAddress $."EmailAddressColumn" -org FloridaBar Now, creating 1,000+ contacts in active directory - I assume that shouldn't be an issue. Do I have the "-org" parm wrong? Do I need to spell out the complete organization unit name (my.domain.name/Users/FloridaBar)? Is there a better way of doing this? Thanks in advance Ken

  Read the article

• Nvidia GTS 360M in Asus laptop shuts off when gaming on external display

  - by mr odus

  I have had this problem on my Asus G51j Intel I5, Nvidia GTS360M graphics card. Just updated the drivers to latest off Nvidias site. Most games I play, If I hook it up through an external monitor(this happens whether it's HDMI or VGA). The laptop hard shuts down after about 20 minutes, give or take. This tends to happen on more graphically intense games like Call of dutys, bioshock. I'm running Windows 7, latest nvidia drivers. Games work fine on my laptops screen, and Movies, general computing work fine on the external displays. The laptop always sits on a cooling pad and the latest time was in front of my AC unit, I ran heatfan or whatever the heat tracking software was, and my temperatures were normal through a shut down. This has been happening for the life of the laptop. I dont play very many games, and even fewer on an external monitor, so this issue doesnt come up much Is it possible I have a faulty graphics card? Is there anything else I can try?

  Read the article

• Auth-Type :- Reject in RADIUS users file matches inner tunnel request but sends Access-Accept

  - by mgorven

  I have WPA2 802.11x EAP authentication setup using FreeRADIUS 2.1.8 on Ubuntu 10.04.4 talking to OpenLDAP, and can successfully authenticate using PEAP/MSCHAPv2, TTLS/MSCHAPv2 and TTLS/PAP (both via the AP and using eapol_test). I am now trying to restrict access to specific SSIDs based on the LDAP groups which the user belongs to. I have configured group membership checking in /etc/freeradius/modules/ldap like so: groupname_attribute = cn groupmembership_filter = "(|(&(objectClass=posixGroup)(memberUid=%{User-Name}))(&(objectClass=posixGroup)(uniquemember=%{User-Name})))" and I have configured extraction of the SSID from Called-Station-Id into Called-Station-SSID based on the Mac Auth wiki page. In /etc/freeradius/eap.conf I have enabled copying attributes from the outer tunnel into the inner tunnel, and usage of the inner tunnel response in the outer tunnel (for both PEAP and TTLS). I had the same behaviour before changing these options however. copy_request_to_tunnel = yes use_tunneled_reply = yes I'm running eapol_test like this to test the setup: eapol_test -c peap-mschapv2.conf -a 172.16.0.16 -s testing123 -N 30:s:01-23-45-67-89-01:Example-EAP with the following peap-mschapv2.conf file: network={ ssid="Example-EAP" key_mgmt=WPA-EAP eap=PEAP identity="mgorven" anonymous_identity="anonymous" password="foobar" phase2="autheap=MSCHAPV2" } With the following in /etc/freeradius/users: DEFAULT Ldap-Group == "employees" and running freeradius-Xx, I can see that the LDAP group retrieval works, and that the SSID is extracted. Debug: [ldap] performing search in dc=example,dc=com, with filter (&(cn=employees)(|(&(objectClass=posixGroup)(memberUid=mgorven))(&(objectClass=posixGroup)(uniquemember=mgorven)))) Debug: rlm_ldap::ldap_groupcmp: User found in group employees ... Info: expand: %{7} -> Example-EAP Next I try to only allow access to users in the employees group (regardless of SSID), so I put the following in /etc/freeradius/users: DEFAULT Ldap-Group == "employees" DEFAULT Auth-Type := Reject But this immediately rejects the Access-Request in the outer tunnel because the anonymous user is not in the employees group. So I modify it to only match inner tunnel requests like so: DEFAULT Ldap-Group == "employees" DEFAULT FreeRADIUS-Proxied-To == "127.0.0.1" Auth-Type := Reject, Reply-Message = "User does not belong to any groups which may access this SSID." Now users which are in the employees group are authenticated, but so are users which are not in the employees group. I see the reject entry being matched, and the Reply-Message is set, but the client receives an Access-Accept. Debug: rlm_ldap::ldap_groupcmp: Group employees not found or user is not a member. Info: [files] users: Matched entry DEFAULT at line 209 Info: ++[files] returns ok ... Auth: Login OK: [mgorven] (from client test port 0 cli 02-00-00-00-00-01 via TLS tunnel) Info: WARNING: Empty section. Using default return values. ... Info: [peap] Got tunneled reply code 2 Auth-Type := Reject Reply-Message = "User does not belong to any groups which may access this SSID." ... Info: [peap] Got tunneled reply RADIUS code 2 Auth-Type := Reject Reply-Message = "User does not belong to any groups which may access this SSID." ... Info: [peap] Tunneled authentication was successful. Info: [peap] SUCCESS Info: [peap] Saving tunneled attributes for later ... Sending Access-Accept of id 11 to 172.16.2.44 port 60746 Reply-Message = "User does not belong to any groups which may access this SSID." User-Name = "mgorven" and eapol_test reports: RADIUS message: code=2 (Access-Accept) identifier=11 length=233 Attribute 18 (Reply-Message) length=64 Value: 'User does not belong to any groups which may access this SSID.' Attribute 1 (User-Name) length=9 Value: 'mgorven' ... SUCCESS Why isn't the request being rejected, and is this the right way to implement this?

  Read the article

• Linux Sound Drivers - Recompiling kernel with ehcd-hcd module

  - by jhome

  I just installed Linux Mint and I am trying to get my usb soundcard to work. I am completely new to Linux so I have only been learning about all the important parts of the OS this afternoon. No one I know has compiled kernel so I can't ask anyone. I am following instructions on this site: http://wiki.ubuntuusers.de/Benutzer/BigMc#Final-setup-of-US-122L-US-144 "Recompile your Kernel with ehcd-hcd as a module: Instructions for Ubuntu (german) Change "Device Drivers - USB support - EHCI HCD (USB 2.0) support)" to "M" when configuring. Make sure you also install the kernel headers." I know how to do any of these processes. Someone mentioned a package manager. Is recompiling basically in layman's terms reinstallation? Where do I go to the change device drivers? Cheers Edit: I am attempting to be able to use my Tascam US-144 on Linux Mint. Apparently, to use it properly it has to regress to functionality of a former unit (US-122), so according to the instructions a USB port has to be USB 1.0, rather than USB 2.0. I've tried using that ndis** programme for wireless drivers but with no success.

  Read the article

• Symantec Endpoint Protection Virus Definitions

  - by Gus Denton

  I have done some Googling but I cannot get a definitive answer certainly not from the Symantec KB. I have a Virtualised Win 2003R2 server 32bit. It has been provisioned to me with Symantec Endpoint Protection 11.0.62xxx CLIENT (not a definitions server) the directory C:\Program Files\Common Files\Symantec Shared\VirusDefs is 750MB IT doesn't contain .tmp directories so it is NOT a corrupt definitions server. IT does contain directories named with a date pattern YYYYMMDD.xxx Some of these folders are 12 months old and I would like to recover the space. The sysmantect forums are full of this stuff but a lot of the postings contain links back to documents that are not specific to End Point Protection Client. It appears that I should be able to delete the older folders and all will be OK. with a service restart however there is a warning about having Live Update Administrator Installed Firstly I have no idea if I have this installed how to I check and secondly can I just ditch these old files and restart ? Regards Gus Denton Learning and Teaching Uni of New South Wales Sydney Australia For those trying to assist me I thankyou. I have followed some instructions found on the Symantec site and assumed that the response from Nixphoe would resolve my issue. It appears that as I am on a provisioned VM from a central IT unit I cannot run the Symantec commands from the Run prompt as my admin creds to get me in. (smc -stop) Basically I need to claw back some Diskspace from the c: drive which is being filed up with WSUS patches and Symantec files. I have managed to delete one symantec cache through the live update control panel and recovered 470Mb I suppose my last question for those more experienced than myself is, can I simply remove say the two oldest virus definition folders without completely foobaring the End Point protection and the server ? Regards Gus

  Read the article

< Previous Page | 601 602 603 604 605 606 607 608 609 610 611 612  | Next Page >