Search Results

Search found 29619 results on 1185 pages for 'android virtual device'.

Page 607/1185 | < Previous Page | 603 604 605 606 607 608 609 610 611 612 613 614  | Next Page >

• Can I replace a router and DHCP server without disrupting traffic?

  - by SRobertJames

  I have a device which acts as a router and DHCP server. I'm replacing it, and would like to minimize down time. If I unplug it, and plug in a different device with the same IP, will all the PCs with DHCP leases keep on working? (I have DHCP Conflict detect on, so it shouldn't reassign a DHCP address already used). What if I want to change the IP (new subnet) - is there anyway to tell all the clients (Windows PCs) to release their DHCP leases and request new ones in a minute? If before unplugging the old device, I have it release all DHCP leases, will the Windows PCs automatically ask for new DHCP addresses?

  Read the article

• Java JRE: Setting default heap size

  - by AndiDog

  I'm having trouble with Java on a virtual server, it always gives me the following error: # java Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. I first solved this by using the CACAO virtual machine (of OpenJDK, by putting it first in jvm.cfg), but then I run into problems with my web application (Play! framework based, gives me nasty LinkageErrors). So I cannot use that VM. Instead I'd like to just use the normal server VM and set -Xmx128M by default. How can I do that? Related: this question

  Read the article

• How can you configure the uPnP server on windows home server?

  - by pschorf

  I'm currently helping my parents with their home network set up while I'm home. I have a Synology NAS device which supports a uPnP server. I have a few MPEG-4 movies stored on the box, and simply enabling the uPnP server on the NAS streamed the video to some devices they have, including their Xbox 360 and Samsung television. They have a windows home server (HP MediaSmart.) I put one of the movies in the "Videos" folder of the device, and enabled sharing. It shows up on the television, but when played it produces an "unsupported file type" error. I have all of the transcoding settings disabled on the Synology device, so it should be streaming the same file. Is there some additional configuration I need to perform on the home server unit?

  Read the article

• Testing a Virtualisation of a Debian Server (vmWare vSphere probably)

  - by xyza

  I'm soon getting access to a powerful root-server (quad-core, 16gb ram, 1gbit connection) where gameservers (like minecraft,counterstrike etc.) for different customers should be setup. My plan is to use programs such as vmWare vSphere to create some virtual machines for each customer. Inside such a virtual machine I'll setup the gameserver and maybe some kind of ftp server when its needed. Now that I'm kinda new to virtualisation of servers I want to test this local on my Desktop Computer. Is it possible to create a virtual machine of debian using vmWare Player on my Windows desktop computer and then install vmware vSphere in this VM to create multiple VM's inside that VM ? Or do I really need to install Debian on my desktop computer. (I want to use the time during installations etc. to work a bit at my windows installation) Some tips on virtualising debian servers are also appreciated :)

  Read the article

• TCP > COM1 for receiving messages and displaying on POS display pole

  - by JakeTheSnake

  I currently have a Java Applet running on my web page that communicates to a display pole via COM1. However since the Java update I can no longer run self-signed Java Applets and I figure it would just be easier to send an AJAX request back to the server and have the server send a response to a TCP port on the computer...the computer would need a TCP COM virtual adapter. How do I install a virtual adapter to go from a TCP port to COM1? I've looked into com0com and that is just confusing as hell to me, and I don't see how to connect any ports to COM1. I've tried tcp2com but it doesn't seem to install the service in Windows 7 x64. I've tried com2tcp and the interface seems like it WOULD work (I haven't tested), but I don't want an app running on the desktop...it needs to be a service that runs in the background. So to summarize how it would work: Web page on comp1 sends AJAX request to server Server sends text response to comp1 on port 999 comp1 has virtual COM port listening on port 999, sends data to COM1 pole displays data

  Read the article

• How to configure Linux to act as a Bluetooth RFCOMM SPP server?

  - by regulatre

  I'm writing a phone app for Android that connects to a bluetooth RFCOMM device in my car. My phone app talks AT commands with it. For development work, I often need to communicate with the device to try different commands and things. My neighbors are starting to think I'm weird because I sit in my car for hours on end with my laptop screen shining on my face, typing away like a script kiddie. I'd much rather configure one of my many Linux servers to act as a bluetooth RFCOMM device and allow me to connect to it (indoors, while I sit on my couch). I imagine I have to start with something like sdptool add SP But then what? I'm perfectly happy writing a perl app to handle the I/O, but I just don't know how to make the bluez stack accept connections and subsequently pipe that stream to a perl app.

  Read the article

• Network monitoring library, or objects, for a cloud

  - by Andrew Smith

  I am looking for library to support server / switch monitoring, to actually be able to check with the device if it's working OK. However this requires some sort of auto-detection and device support. Basically I need to automatically detect a new device, start monitoring it like CPU and PING. So how do I auto-detect the machine remotely, this is something I need library for. Rackspace has something like this - "Cloud Monitoring API". But is there anything opensource which can be used same way? The Nagios and others doesnt have such API, and the big and expensive systems are too big to handle in public cloud, so there must be some other network monitoring engine with API, which can add a new servers automatically and support user isolation for example so I dont see other servers except mine.

  Read the article

• is there such a thing as a ip femtocell, and what does it do?

  - by The Journeyman geek

  My dad mentioned a co-worker suggested using a device, that might use cdma to route calls through IP to save costs on a certain overseas project we're on- since our home base is quite far from there. I've never heard of such a device, so if it does, i'm wondering, if its specific to particular ISPs, or if you can just pick one off the shelf, plug it into an arbitraty internet connection, and make calls using it and a cellphone of some sort? As you can tell, details are sketchy, so... if such a device dosen't exist, saying so might be a right answer ;)

  Read the article

• Enabling Compiz Viewport Switcher key bindings

  - by David Moles

  I'm running compiz 0.8.2 with compizconfig on Scientific Linux 6.2 with Gnome 2.28.2. In the compizconfig "General Options" I have "Desktop Size" set as follows: Horizontal Virtual Size: 6 Vertical Virtual Size: 1 Number of Desktops: 1 This gets me the layout I want, i.e. 6 workspaces in a horizontal layout. Ctrl-alt-cursor-keys work fine for switching between them. However, I can't figure out how to get key bindings for specific workspaces. I've tried enabling "Viewport Switcher" in compizconfig, and tried various combinations both in "Number-based viewport switching" and "Go to specific viewport", to no apparent effect. My first thought was that something else was eating the specific key bindings I chose, but I think I've tried every combination of shift, control, alt and super (i.e., the Windows key) by now. I tried setting 6 desktops under "General Options" instead of one desktop with horizontal virtual size 6, but that doesn't seem to make a difference either. What am I missing?

  Read the article

• How to make WinServer's AD work with Linux DNS/DHCP on VMware?

  - by Borald

  Hope you're fine. I got 2 virtual machines : Windows Server 2008 with Active Directory installed. Linux that works as a DNS and DHCP Server I need to make them work together, but I don't if this is going to be possible because VMWARE is sharing the NIC with other virtual machines and computer itself. I've assigned different IP static adresses to the servers. Is there a way for me to make these things get interconnected and test them on some virtual clients ? Any help will be much appreciated... (useful links,tutorials,..) Thanks in advance !

  Read the article

• ubuntu server in a vm, can't connect to internet

  - by jessh

  I'm attemtping to host my own development web server in a virtual box guest, Ubuntu Server. I would like this virtual machine to be accessible from not only my home network, but outside the LAN as well. As such, I've set up a static IP (so I can later forward ports to this static IP.) My virtual box settings have this vm only using one adapter -- in bridged mode. Here's what my /etc/network/interfaces looks like: iface eth0 inet static address 10.0.1.203 /*this is outside the DHCP range*/ netmask 255.255.255.0 gateway 10.0.1.1 network 10.0.1.0 broadcast 10.0.1.255 dns-nameservers: 8.8.8.8 8.8.8.4 Here's what the output of ifconfig looks like: https://dl.dropbox.com/u/2241201/locker/ubuntu.png My Host is a mac mini, running OS X 10.7. From within the guest, if I ping google.com: $ ping google.com # outputs 'ping: unknown host google.com' immediately Why am I unable to access the web?

  Read the article

• slow disk writes between host and guest

  - by Jure1873

  I've got a ubuntu (server kernel) on a amd x4, 4gb ram, 2x seagate sata 1 tb disks for testing virtual machines and the write performance is very slow. The two disks are in a software raid1 array, one small boot ext3 partition, 10gb system partition and the rest is a xfs partition (about 980) gb for data (virtual machines). If I'm copying files from the virtual machine to the host with rsync or scp the copy frequently stalls or goes at about 1mb/s. What's wrong? I've tried disabling barriers on xfs, increased logbufs, allocsize, but it seems nothing helps. The strange thing is that await (for example during copying) for sda is usually under 100, while for sdb is around 400. Any ideas on what could be wrong / what could I do to improve this setup?

  Read the article

• PS/2 mouse works with Windows 7 32-bit but not recognised by 64-bit, What to do?

  - by Bogan

  Our USB mouse was stolen and a PS/2 OK_520 Mouse that works OK on my Medion PC, running Windows 7 32-bit, if plugged in before booting, is not recognised by Windows 7 64-bit on a Dell INSPIRONone_19T with a 19" Touch Screen. (It is a communal computer available to all residents.) A USB mouse works OK and the Update Driver option reports: 'driver is up to date'. Without the USB Mouse, Device Manager/Mice shows only the Touch Screen as a Mouse. The Add New Hardware option searches but shows nothing and the Troubleshooter says ' device possibly not recognised, alterations made to system, try again.' but it is still not recognised after repeated re-boots. The BIOS does not seem to have any option to enable a PS/2 Mouse. The Mouse is very old so maybe it is not 64-bit compatible, or there is no 64-bit driver for one, but how to get one if the device is not recognised?

  Read the article

• Cross-platform automatic adhoc wifi?

  - by marienbad

  I'm not very knowledgeable about wifi, but I understand the notion of Adhoc networks (Wifi without a router), so... Is there a standard (or widely implemented) way of letting a device "momentarily" negotiate a wifi connection (Adhoc network or otherwise) directly to another device, transfer some data, and then quit, all without any user intervention on either device? For example, let's say I have a PC and an ereader in the same room and there's no nearby wifi router for either of these devices to connect to. I want to send a file from PC to ereader but I don't want to do the work of setting up network, selecting an SSID, or entering passwords. Is that possible?

  Read the article

• Virtualhosts - best way of dealing with it?

  - by axqe56

  I'm competent at the basics of Apache, PHP and virtual hosting but have a question about virtual hosting. As far as I'm aware, HOSTS files can only be in one of the following locations: C:/Windows/system32/drivers/etc (varies in older installs, I believe) I don't think it can be put elsewhere for use with Apache, simply for virtual hosts, and the main HOSTS file for blocking sites etc. I heard about PAC files on Uniform Server's website (http://wiki.uniformserver.com/index.php/Virtual_Hosting:_PAC) but they're browser-specific though, aren't they? What's the best way to deal with virtualhosts, other than HOSTS file? My server isn't currently open to the internet yet, but if it is, what's the best way to resolve DNS for my virtualhost domains if it were to become forward-facing (i.e open to the internet)?

  Read the article

• Syncronization inside the same PC

  - by FGO

  Hi, I work in a company without a server and operating in diferent countries. Because of this we work on a virtual office basis and share files through a virtual server called Drop Box. I'm the controller of this virtual server and find it to be incomplete. We work on levels of permission so I invite access to users for 3 possible levels and find sometimes that I need to have a specific folder inside one mother folder to be inside 2 levels. The only way I can find to make my life easier is to automatically syncronize specific folders between diferent mother folders, but I don't know how to do this in windows 7. Can anyone give me a hint? Thanks

  Read the article

• How to remove bad disk from LVM2 with the less data loss on other PVs?

  - by Walkman

  I had a LVM2 volume with two disks. The larger disk became corrupt, so I cant pvmove. What is the best way to remove it from the group to save the most data from the other disk? Here is my pvdisplay output: Couldn't find device with uuid WWeM0m-MLX2-o0da-tf7q-fJJu-eiGl-e7UmM3. --- Physical volume --- PV Name unknown device VG Name media PV Size 1,82 TiB / not usable 1,05 MiB Allocatable yes (but full) PE Size 4,00 MiB Total PE 476932 Free PE 0 Allocated PE 476932 PV UUID WWeM0m-MLX2-o0da-tf7q-fJJu-eiGl-e7UmM3 --- Physical volume --- PV Name /dev/sdb1 VG Name media PV Size 931,51 GiB / not usable 3,19 MiB Allocatable yes (but full) PE Size 4,00 MiB Total PE 238466 Free PE 0 Allocated PE 238466 PV UUID oUhOcR-uYjc-rNTv-LNBm-Z9VY-TJJ5-SYezce So I want to remove the unknown device (not present in the system). Is it possible to do this without a new disk ? The filesystem is ext4.

  Read the article

• Does my DLink DNS-323 need to reside on a "192.168.0.0/24" subnet?

  - by Raymond

  I've installed two brand new 2-tib drives in the DLink and plugged it in to my network. I set my router's static address table to include the MAC address of the device; however it doesn't ever "show up." Do I need to use the custom software to administer this device? Do I need to use a "192.168.0.0/24" network in order for this device to work (asking because it states that if DHCP isn't detected, it will default to an address in that range; and my network is not in that range).

  Read the article

• USB hardwares driver installation

  - by unknown (google)

  I am using few USB hardwares like camera and scanners with my software application. I plugged my hardware in USB A installed the drivers and the device was working properly. Now I tried to connect the same hardware in USB B (ie, some other USB port), and again it is asking for the driver installation. I need to know the reason behind this. Is it something to do with the particular device or system? Anywork around for this during the first time driver installation? Please anyone explain me how the USB works physical address, how it is assigned and how the driver for a device getting installed. Thanks in advance.

  Read the article

• Network card dies when trying to wake up laptop from sleep

  - by Bugmaster

  I have a Dell XPS 1640 laptop (aka Dell Studio XPS 16), running Vista. Whenever the laptop wakes up from sleep, my Broadcomm LAN card immediately dies. Any attempt to access it completely locks up whichever program I use to access it. There appears to be no way to re-awaken the card, other than rebooting; note that Vista does not even shut down properly if some program is waiting for the card. So far, I have tried the following: Disabled the "allow your computer to shut down this device to save power" in the device properties. This had no effect. Attempted to disable and then enable the card in the device properties. No effect. Tried ipconfig /renew: this locks up ipconfig to the point where I can't even kill its process. Force-install updated drivers from broadcomm: no effect. Does anyone have any other ideas ?

  Read the article

• How do I get a USB hard-disk adaper to work with a PCMCIA USB card?

  - by Carl

  I have a PCMCIA (Cardbus) 32bit USB 2.0 2-port card. If I plug my MP3 player in it works fine. I have a USB adapter for a hard disk drive. When I plug that into the PCMCIA USB slot the light on that hard disk flashed between red and green - it should stay green. "USB Mass Storage device" is added in the Device Manager, but no drive letter appears in My Computer. The installing device icon down by the clock never goes away. (Windows XP SP3.)

  Read the article

• Belkin Wireless G router not working on Windows 7

  - by coore

  I have a Belkin F5D7230-4 Wireless G router which used to work on XP. I have a clean Windows 7 install (on the same desktop PC), and it just won't work. Device Manager lists the adapter as a USB device, but it says "The drivers for this device are not installed", even though the driver installer said the installation was OK. Manage Wiresless Networks says "wireless is not currently enabled". The WLAN AutoConfig service is running. My specific question is which of the two symptoms above should I go for first? Should I try to fix the driver installation somehow, or should I try to enable wireless? Is one caused by the other, or is this two independent problems? Any other thoughs that could help me are also appreciated.

  Read the article

• Hyper-V Server 2008 Configuration

  - by Eternal21

  I need to set-up Lync on a Server 2008 machine. The problem is that Lync cannot be set up on a Domain Controller. That means I need to have one Server 2008 that's a domain controller and another that's Server 2008 running Lync. I figured the best way would be hosting it on a single machine, using virtual machines. I installed Server 2008, but now my question is this. Do I add two virtual machines (Domain Controller and Lync), or do I only add one virtual machine for Lync, and the 'parent' Server 2008 can act as a domain controller?

  Read the article

• USB HD Freezes Windows Explorer

  - by nfplee

  I recently purchased a "Seagate STBX1000200 1TB Expansion 2.5 inch External Hard Drive". It has been working without problems until recently. When i plug the device into a USB port the device is recognised as it appears in the device manager but when i go to Windows Explorer and try to open it (or right click on it) it hangs/freezes windows explorer. Please note i am using Windows 7 Professional. I have already tried various things without success after searching for people with similar problems. I did read that it could be a problem with how the computer assigns a drive letter. But whrn i go to disk management (when running as an administrator) it hangs and displays the following message: Connecting to virtual disk service I'd appreciate it if anyone could offer some advice. Thanks

  Read the article

• Touchpad not working after login in Ubuntu

  - by Maria Mateescu

  At some point my touchpad stopped working on Lenovo x220 under Ubuntu 11.10, after login. I have found two possible solutions for that online, but neither of them work. First, gconftool-2 --set --type boolean /desktop/gnome/peripherals/touchpad/touchpad_enabled true and a second one, xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Synaptics Off" 8 0 After looking more carefully into xinput I have realized that xinput list-props "SynPS/2 Synaptics TouchPad" outputs: Device Enabled (132): 0 This field seems to be stuck to zero, because trying to set it back to 1 by: xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Device Enabled" 8 1 doesn't seem to have any effect, e.g. I still have: Device Enabled (132): 0 Any ideas? Thank you!

  Read the article

< Previous Page | 603 604 605 606 607 608 609 610 611 612 613 614  | Next Page >