Search Results

Search found 22301 results on 893 pages for 'software sources'.

Page 614/893 | < Previous Page | 610 611 612 613 614 615 616 617 618 619 620 621  | Next Page >

• Site-to-Site PPTP VPN connection between two Windows Server 2008 R2 servers

  - by steve_eyre

  We have two Windows Server 2008 R2 machines, one in our main office and one in a new office which we have just moved offsite. The main office has previously been handling client-to-server PPTP VPN connections. Now that we have moved our second server out of office, we want to set up a demand-dial or persistent VPN connection from the second server to the primary. Using a custom setting RRAS profile, we have successfully managed to set up a site-to-site VPN connection so that from the second server itself, it can access any of the devices in the main office and communicate back. However, any connected machines in the second office cannot use this connection, even when using the second server as gateway. The demand-dial interface is setup from the Second Server dialing into Main Server and a static route set up on RRAS for 192.168.0.0 with subnet mask 255.255.0.0 pointing down this network interface. The main office has the network of 192.168.0.0/16 (subnet mask 255.255.0.0). The second office has the network of 172.16.100.0/24 (subnet mask 255.255.255.0). What steps do we need to take to ensure traffic from the second office PCs going towards 192.168.x.x addresses use the VPN route? Many Thanks in advance for any help the community can offer. Debug Information Here is the route print output from the second server: =========================================================================== Interface List 23...........................Main Office 22...........................RAS (Dial In) Interface 16...e0 db 55 12 fa 02 ......Local Area Connection - Virtual Network 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 24...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.16.100.250 172.16.100.222 261 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 <MAIN OFFICE IP> 255.255.255.255 172.16.100.250 172.16.100.222 6 172.16.100.0 255.255.255.0 On-link 172.16.100.222 261 172.16.100.113 255.255.255.255 On-link 172.16.100.113 306 172.16.100.222 255.255.255.255 On-link 172.16.100.222 261 172.16.100.223 255.255.255.255 On-link 172.16.100.222 261 172.16.100.224 255.255.255.255 On-link 172.16.100.222 261 172.16.100.225 255.255.255.255 On-link 172.16.100.222 261 172.16.100.226 255.255.255.255 On-link 172.16.100.222 261 172.16.100.227 255.255.255.255 On-link 172.16.100.222 261 172.16.100.228 255.255.255.255 On-link 172.16.100.222 261 172.16.100.229 255.255.255.255 On-link 172.16.100.222 261 172.16.100.230 255.255.255.255 On-link 172.16.100.222 261 172.16.100.255 255.255.255.255 On-link 172.16.100.222 261 192.168.0.0 255.255.0.0 192.168.101.87 192.168.101.17 266 192.168.101.17 255.255.255.255 On-link 192.168.101.17 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.16.100.222 261 224.0.0.0 240.0.0.0 On-link 172.16.100.113 306 224.0.0.0 240.0.0.0 On-link 192.168.101.17 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.16.100.222 261 255.255.255.255 255.255.255.255 On-link 172.16.100.113 306 255.255.255.255 255.255.255.255 On-link 192.168.101.17 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.0.200 Default 0.0.0.0 0.0.0.0 172.16.100.250 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 16 261 fe80::/64 On-link 16 261 fe80::edf4:85c6:3c15:dcbe/128 On-link 1 306 ff00::/8 On-link 16 261 ff00::/8 On-link 22 306 ff00::/8 On-link =========================================================================== Persistent Routes: None And here is the route print from one of the second office PCs: =========================================================================== Interface List 11...10 78 d2 32 53 27 ......Atheros AR8151 PCI-E Gigabit Ethernet Controller 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.16.100.250 172.16.100.103 10 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.16.100.0 255.255.255.0 On-link 172.16.100.103 266 172.16.100.103 255.255.255.255 On-link 172.16.100.103 266 172.16.100.255 255.255.255.255 On-link 172.16.100.103 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.16.100.103 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.16.100.103 266 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 11 266 fe80::/64 On-link 11 266 fe80::e973:de17:a045:aa78/128 On-link 1 306 ff00::/8 On-link 11 266 ff00::/8 On-link =========================================================================== Persistent Routes: None

  Read the article

• Partner Webcast - Rethink HR! Introducing New Fusion HCM - 05 July 2012

  - by Thanos

  Introducing New Cloud Applications from the Leader in Human Capital Management Customers are constantly looking for better ways to manage talent, develop leaders, engage with employees, and strategically plan their workforce. To meet these challenges, you need modern applications that can efficiently deliver analytical insights, collaborative tools, and a personalized user experience. That's why Oracle has rethought the business of HR to provide value to the entire organization—from HR professionals to employees to managers. With Oracle Fusion Human Capital Management, you can: Do things your way with a role-centric user experience that can be personalized to the way you work Know your people better with the most complete HR business intelligence capabilities Work as a team by quickly finding and connecting with peers and experts to deliver concrete results Leverage enterprise-grade software as a service (SaaS) to get up and running fast and securely Our speaker, Csaba Fehér, HCM Senior Sales Consultant, will share how Oracle Fusion Human Capital Management can deliver immediate business value with new techniques and the latest innovations to address your toughest concerns, including how to: Align compensation and performance Organize and calibrate critical talent Predict key workforce trends and risks Delivery FormatThis FREE online LIVE eSeminar will be delivered over the Web. Registrations received less than 24hours prior to start time may not receive confirmation to attend. Duration: 1 hour Register Now! For any questions please contact us at [email protected]

  Read the article

• Good default for XDG_RUNTIME_DIR?

  - by cadrian

  The XDG Base Directory Specification is a very interesting spec for user directories. It also provides good default values, except for XDG_RUNTIME_DIR. Now I am writing a software that needs to create named pipes. It is a per-user client-server framework (there is a FIFO for the server and a FIFO per client). If XDG_RUNTIME_DIR is not defined, I am currently using a per-user subdirectory in /tmp — but it does not ensure all the specified conditions (viz. the paragraph starting with "The lifetime of the directory MUST be bound to the user being logged in…") Is /tmp/myserver-$USER good enough? Edit I saw elsewhere a few suggestions: . is quite unsatisfactory (at least because it is not an absolute path). I also saw /var/run/user/$USER — not bad, but that directory does not exist (at least on my box running a Debian testing)

  Read the article

• Explaining the difference between OData & RDF by way of analogy

  - by jamiet

  A couple of months back I wrote a blog post entitled Microsoft, OData and RDF where I gave a high level view of the OData protocol and how it compares to RDF. I talked about linked data, triples and such like which may have been somewhat useful however jargon-heavy. Earlier today Dr Michael Hausenblas (blog | twitter) offered an analogy which I think is probably more useful and with Michael's permission I'm re-posting it here:Imagine a Web (a Web of Documents, if you wish), which is not based on HTML and hyperlinks, but on MS Word documents. The documents are all available on the Internet, so you can download them and consume the content. But after you’re done with a certain document that talks about a book, how do you learn more about it? For example, reviews about the book or where you can purchase it? Maybe the original document mentions that there is some more related information on another server. So you’d need to go there and look for the related bit of information yourself. You see? That’s what the Web is great at – you just click on a hyperlink and it takes you to the document (or section) you’re interested in. All the legwork is taken care of for you through HTML, URIs and HTTP.Hm, right, but how is this related to OData? Well, OData feels a bit like the above mentioned scenario, just concerning data. Of course you – well actually rather a software program I guess – can consume it (a single source), but that’s it.from Oh – it is data on the Web by Michael Hausenblas I believe that OData has loads of use cases but its important to understand its limitations as well and I think Michael has done a good job of explaining those limitations.@Jamiet   Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• OpenSource License Validation [closed]

  - by Macmade

  I'm basically looking for some kind of FLOSS/OpenSource license validation service. I have special needs for some projects I'd like to open-source. I know there's actually tons of different FLOSS/OpenSource licenses, each one suitable for some specific purpose, and that creating a «new» one is not something recommended, usually. Anyway, even if I'm not an expert in the legal domain, I've got some experience with FLOSS/OpenSource, at a legal level, and it seems there's just no license covering my needs. I actually wrote the license terms I'd like to use, and contacted the FSF, asking them to review that license, as it seems (at least that's written on their website) they can do such review work. No answer. I tried repetitively, but no luck. So I'm currently looking for an alternate legal expertise about that specific license. I don't mind paying such a service, as long as I can be sure the license can be recognised as a FLOSS/OpenSource license. About the license, it's basically a mix of a BSD (third-clause) with a BOOST software license. The difference is about redistribution. Source code redistribution shall retain the copyright novices. The same applies for binary redistribution (like BSD), unless it's distributed as a library (more like BOOST). I hope this question is OK for programmers.stackexchange. I'm usually more active on StackOverflow, but it just seems the right place for such a question. So thank you for your time and enlightened advices. : )

  Read the article

• Partner Webcast – Implementing Web Services & SOA Security with Oracle Fusion Middleware - 20 September 2012

  - by Thanos

  Security was always one of the main pain points for the IT industry, and new security challenges has been introduced with the proliferation  of the service-oriented approach to building modern software. Oracle Fusion Middleware provides a wide variety of features that ease the building service-oriented solutions, but how these services can be secured?Should we implement the security features in each and every service or there’s a better way? During the webinar we are going to show how to implement non-intrusive declarative security for your SOA components by introducing the Oracle product portfolio in this area, such as Oracle Web Services Manager and Oracle IDM. Agenda: SOA & Web Services basics: quick refresher Building your SOA with Oracle Fusion Middleware: product review Common security risks in the Web Services world SOA & Web Services security standards Implementing Web Services Security with the Oracle products Web Services Security with Oracle – the big picture Declarative end point security with Oracle Web Services Manager Perimeter Security with Oracle Enterprise Gateway Utilizing the other Oracle IDM products for the advanced scenarios Q&A session Delivery Format This FREE online LIVE eSeminar will be delivered over the Web. Registrations received less than 24hours prior to start time may not receive confirmation to attend. Thursday, September 20, 2012 - 10:00 AM to 11:00 AM CET (GMT/UTC+1)Duration: 1 hour Register Now Send your questions and migration/upgrade requests [email protected] Visit regularly our ISV Migration Center blog or Follow us @oracleimc to learn more on Oracle Technologies, upcoming partner webcasts and events. All content is made available through our YouTube - SlideShare - Oracle Mix.

  Read the article

• What are the advantages and disadvantages to using your real name online?

  - by Jon Purdy

  As a programmer, do you see any professional or other advantage in using your real name in online discourse, versus an invented handle? I've always gone by a single username and had my real name displayed whenever possible, for a few reasons: My interests online are almost exclusively professional and aboveboard. It constructs a search-friendly public log of all of my work, everywhere. If someone wants to contact me, there are many ways to do it. My portfolio of work is all tied to me personally. Possible cons to full disclosure include: If you feel like becoming involved in something untoward, it could be harder. The psychopath who inherits your project can more easily find out where you live. You might be spammed by people who are not worth the precious time that could be better spent writing more of the brilliant software you're famous for. Your portfolio of work is all tied to you personally. It seems, anyway, that a vast majority of StackOverflow users go by invented handles rather than real names. Notable exceptions include the best-known users, who are typically well established in the industry. But how could we ever become legendary rockstar programmers if we didn't get our names out there? Discuss.

  Read the article

• Monitor HTTP usage on network from Linux free

  - by David

  I manage a small office network. I am looking to start monitoring/logging internet usage (website requests) for each user on a small network. All the windows clients are running through a switch to a BT router. I also have a linux (centos) machine which is connected as a client to the BT router as well. Is there any free software I can install on the linux box (or my own machine) to allow me to log and monitor websites requested by users kind of like browser history. Ideally, something that would collect each client's browser history in 1 place. Thanks

  Read the article

• How much should I charge for setting up a client web server? [closed]

  - by Vincent

  I have quite the eccentric client who wants to move all his ecommerce websites (about 5-10, all PHP/MySQL) to his own web server that I'm supposed to build. He doesn't want to hear anything about VPS hosting and all the issues and expenses related to owning a server. My responsibility would be to buy all the hardware, install and configure software, etc. How much should I charge for this? I'm planning to start with two relatively moderate Dell PowerEdge C2100 servers, one for web (NGINX), one for db (MySQL).

  Read the article

• Extreme Optimization Numerical Libraries for .NET – Part 1 of n

  - by JoshReuben

  While many of my colleagues are fascinated in constructing the ultimate ViewModel or ServiceBus, I feel that this kind of plumbing code is re-invented far too many times – at some point in the near future, it will be out of the box standard infra. How many times have you been to a customer site and built a different variation of the same kind of code frameworks? How many times can you abstract Prism or reliable and discoverable WCF communication? As the bar is raised for whats bundled with the framework and more tasks become declarative, automated and configurable, Information Systems will expose a higher level of abstraction, forcing software engineers to focus on more advanced computer science and algorithmic tasks. I've spent the better half of the past decade building skills in .NET and expanding my mathematical horizons by working through the Schaums guides. In this series I am going to examine how these skillsets come together in the implementation provided by ExtremeOptimization. Download the trial version here: http://www.extremeoptimization.com/downloads.aspx Overview The library implements a set of algorithms for: linear algebra, complex numbers, numerical integration and differentiation, solving equations, optimization, random numbers, regression, ANOVA, statistical distributions, hypothesis tests. EONumLib combines three libraries in one - organized in a consistent namespace hierarchy. Mathematics Library - Extreme.Mathematics namespace Vector and Matrix Library - Extreme.Mathematics.LinearAlgebra namespace Statistics Library - Extreme.Statistics namespace System Requirements -.NET framework 4.0  Mathematics Library The classes are organized into the following namespace hierarchy: Extreme.Mathematics – common data types, exception types, and delegates. Extreme.Mathematics.Calculus - numerical integration and differentiation of functions. Extreme.Mathematics.Curves - points, lines and curves, including polynomials and Chebyshev approximations. curve fitting and interpolation. Extreme.Mathematics.Generic - generic arithmetic & linear algebra. Extreme.Mathematics.EquationSolvers - root finding algorithms. Extreme.Mathematics.LinearAlgebra - vectors , matrices , matrix decompositions, solvers for simultaneous linear equations and least squares. Extreme.Mathematics.Optimization – multi-d function optimization + linear programming. Extreme.Mathematics.SignalProcessing - one and two-dimensional discrete Fourier transforms. Extreme.Mathematics.SpecialFunctions

  Read the article

• Windows Defender Update KB915597 (Definition 1.135.415.0)? Killed My Live Discs

  - by user88311

  Here's my problem, for those willing to read for about 2 minutes here's the entire story, http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/bsod-after-windows-defender-update-kb915597/a4b5fca3-0274-47b4-97c4-61b34c4c4599, for those who want the short version here's what happened. After windows update automatically updated windows defender to kb915597, my computer starting getting bsods on shut down and start up and started experiencing problems withe the usb ports. So I decided to go to the microsoft answers site for help, I know that was probably my first mistake, so I followed their advice and they turned my computer into a large paper weight. Luckily I make physical backups of my c drive every few months and I have one from back in july, so I figured I'd boot up a ubuntu live disc, copy all my files from the past 2 months to a external drive and just copy the backup back to the c drive, that's where I ran into this problem. When I put in either a ubuntu or kubuntu disc, everything goes well, until it finishes the loading bar then when the OS would presumably start up, the computer resets, I've tried with ubuntu, kubuntu and gparted, and only gparted is able to get to the point where it starts up, but even then when I try to access the internet from it, the computer resets, and when I tried to copy the entire C drive partition to a blank external I wasn't able to. So I figured somehow maybe the C drive had something to do with it, so I unplugged the C drive so my computer was just a 2.8 ghz processor and 2 gigs of ram, should have had no problem starting a live disc but the problem still continues. After doing some googling around I've found whenever windows gets a update with the title KB915597 it's pretty much the kill switch for windows, I've tried contacting microsoft tech support and even managed to directly contact a software engineer but as soon as I mention KB915597 they all just blew me off. I hope anybody who reads this has any idea how to fix this, I'm going to attempt to install ubuntu or kubuntu to a external drive using the same computer and see what happens now.

  Read the article

• Alternatives to Professional Version Control

  - by greengit

  We're teaming up with some non programmers (writers) who need to contribute to one of our projects. Now they just don't like the idea of using Git (or anything for that matter) for version controlling their work. I think this is because they just don't find it worthwhile to wrap their heads around the twisted concepts of version control. (when I first introduced them to branching and merging -- they looked like I was offending them.) Now, we're not in a position to educate them or convince them to use it. We're just trying to find alternatives so that we get all their work versioned (which is what we need) -- and they get easy workflow and concentrate on what they do. I have come up with some ideas... tell them to save their work as a separate file every time they make some non-trivial change, and then use a diff on our side to just track changes. write a program (in Python) that implements the "milestones" in CSSEdit in some way. About the project: It is a natural language processing system (written in C + Python). We've hired some writers to prepare inputs for the system in different languages. And as we evolve the software, we'd need those writers to make changes to their inputs (articles). Sometimes the changes are very small (a word or two), and other times big. The reason we need to version control those changes is because every small/big change in the input has the potential to change the system's output dramatically.

  Read the article

• DNS and VPN issues

  - by Lewis

  I recently purchased a year contract for a KVM 512MB VPS running Ubuntu 11.04. I'm having some issues setting up some things on it though - two in particular that I just can't for the life of me figure out. Okay, so I'm trying to setup pptpd as my VPN for my iPhone and my Mac when I'm out on wireless networks. I'm able to login and the chap authenticates but that's as far as I get, no domains will resolve and end up loading forever, I uncommented ms-dns lines as someone had recommended to me and changed the DNS servers to Googles public ones with no luck, is there something I'm missing? (It's probably staring me in the face.) My second issue is that I have managed to setup LAMP but am having a problem with my domain, I have pointed the DNS at 123-reg to my VPS's IP and the 'www .' resolves properly, but when I try to go to the domain without the 'www .' I get the apache landing page ("The web server software is running but no content has been added, yet.") I'm pretty sure there's something I've gotta configure in Apache for the virtual host but I'm missing it. Apart from these minor set-backs I'm enjoying the low-level configuration options of having a VPS and love managing my own server. Thanks!

  Read the article

• Cannot delete .Trash-503 directory, returns a $RECYCLE.BIN.trashinfo: Input/output error

  - by Parto

  I cannot delete .Trash-503 folder via GUI or terminal, it returns a $RECYCLE.BIN.trashinfo: Input/output error Not even sudo rm -r or even a simple ls works in that trash directory. Check terminal output below: subroot@subroot:~$ cd /media/xxxxx/ subroot@subroot:/media/xxxxx$ rm .Trash-503/ rm: cannot remove `.Trash-503/': Is a directory subroot@subroot:/media/xxxxx$ rm -r .Trash-503/ rm: cannot remove `.Trash-503/info/$RECYCLE.BIN.trashinfo': Input/output error rm: cannot remove `.Trash-503/info/found.000.trashinfo': Input/output error rm: cannot remove `.Trash-503/info': Directory not empty subroot@subroot:/media/xxxxx$ sudo rm -r .Trash-503/ [sudo] password for subroot: rm: cannot remove `.Trash-503/info/$RECYCLE.BIN.trashinfo': Input/output error rm: cannot remove `.Trash-503/info/found.000.trashinfo': Input/output error subroot@subroot:/media/xxxxx$ cd .Trash-503/ subroot@subroot:/media/xxxxx/.Trash-503$ ls info subroot@subroot:/media/xxxxx/.Trash-503$ cd info/ subroot@subroot:/media/xxxxx/.Trash-503/info$ ls ls: cannot access $RECYCLE.BIN.trashinfo: Input/output error ls: cannot access found.000.trashinfo: Input/output error found.000.trashinfo $RECYCLE.BIN.trashinfo subroot@subroot:/media/xxxxx/.Trash-503/info$ What's going on here and how can I delete this folder? EDIT I tried checking and repairing the partition using gparted only to get this error message: ERROR: Filesystem check failed! ERROR: 264 clusters are referenced multiple times. NTFS is inconsistent. Run chkdsk /f on Windows then reboot it TWICE! The usage of the /f parameter is very IMPORTANT! No modification was and will be made to NTFS by this software until it gets repaired. I don't have windows installed, how can I run chkdsk /f from ubuntu?

  Read the article

• Can't log in via SSH to any accounts set to use /bin/bash as a default shell

  - by Gui Ambros

  I'm trying to install bash as the default shell on a ARM Linux running on an embedded device (Synology DS212+ NAS). But there's something really wrong, and I can't figure out what it is. Symptoms: 1) Root has /bin/bash as default shell, and can log in normally via SSH: $ grep root /etc/passwd root:x:0:0:root:/root:/bin/bash $ ssh root@NAS root@NAS's password: Last login: Sun Dec 16 14:06:56 2012 from desktop # 2) joeuser has /bin/bash as default shell, and receives "Permission denied" when trying to log in via SSH: $ grep joeuser /etc/passwd joeuser:x:1029:100:Joe User:/home/joeuser:/bin/bash $ ssh joeuser@localhost joeuser@NAS's password: Last login: Sun Dec 16 14:07:22 2012 from desktop Permission denied, please try again. Connection to localhost closed. 3) changing joeuser's shell back to /bin/sh: $ grep joeuser /etc/passwd joeuser:x:1029:100:Joe User:/home/joeuser:/bin/sh $ ssh joeuser@localhost Last login: Sun Dec 16 15:50:52 2012 from localhost $ To make things even more strange, I can log in as joeuser using /bin/bash using the serial console (!). Also a su - joeuser as root works fine, so the bash binary itself is working fine. In an act of despair, I changed joeuser's uid to 0 on /etc/passwd, but also didn't work, so it doesn't seem to be anything permission related. Seems that bash is doing some extra checking that sshd didn't like, and blocking the connections for non-root users. Maybe some sort of sanity checking - or terminal emulation - that is triggering the SIGCHLD, but only when called via ssh. I already went through every single item on sshd_config, and also put SSHD in debug mode, but didn't find anything strange. Here's my /etc/ssh/sshd_config: LogLevel DEBUG LoginGraceTime 2m PermitRootLogin yes RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile %h/.ssh/authorized_keys ChallengeResponseAuthentication no UsePAM yes AllowTcpForwarding no ChrootDirectory none Subsystem sftp internal-sftp -f DAEMON -u 000 And here's the output from /usr/syno/sbin/sshd -d, showing the failed attempt of joeuser trying to log in, with /bin/bash as the shell: debug1: Config token is loglevel debug1: Config token is logingracetime debug1: Config token is permitrootlogin debug1: Config token is rsaauthentication debug1: Config token is pubkeyauthentication debug1: Config token is authorizedkeysfile debug1: Config token is challengeresponseauthentication debug1: Config token is usepam debug1: Config token is allowtcpforwarding debug1: Config token is chrootdirectory debug1: Config token is subsystem debug1: HPN Buffer Size: 87380 debug1: sshd version OpenSSH_5.8p1-hpn13v11 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: read PEM private key done: type ECDSA debug1: private host key: #2 type 3 ECDSA debug1: rexec_argv[0]='/usr/syno/sbin/sshd' debug1: rexec_argv[1]='-d' Set /proc/self/oom_adj from 0 to -17 debug1: Bind to port 22 on ::. debug1: Server TCP RWIN socket size: 87380 debug1: HPN Buffer Size: 87380 Server listening on :: port 22. debug1: Bind to port 22 on 0.0.0.0. debug1: Server TCP RWIN socket size: 87380 debug1: HPN Buffer Size: 87380 Server listening on 0.0.0.0 port 22. debug1: Server will not fork when running in debugging mode. debug1: rexec start in 6 out 6 newsock 6 pipe -1 sock 9 debug1: inetd sockets after dupping: 4, 4 Connection from 127.0.0.1 port 52212 debug1: HPN Disabled: 0, HPN Buffer Size: 87380 debug1: Client protocol version 2.0; client software version OpenSSH_5.8p1-hpn13v11 SSH: Server;Ltype: Version;Remote: 127.0.0.1-52212;Protocol: 2.0;Client: OpenSSH_5.8p1-hpn13v11 debug1: match: OpenSSH_5.8p1-hpn13v11 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1-hpn13v11 debug1: permanently_set_uid: 1024/100 debug1: MYFLAG IS 1 debug1: list_hostkey_types: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: AUTH STATE IS 0 debug1: REQUESTED ENC.NAME is 'aes128-ctr' debug1: kex: client->server aes128-ctr hmac-md5 none SSH: Server;Ltype: Kex;Remote: 127.0.0.1-52212;Enc: aes128-ctr;MAC: hmac-md5;Comp: none debug1: REQUESTED ENC.NAME is 'aes128-ctr' debug1: kex: server->client aes128-ctr hmac-md5 none debug1: expecting SSH2_MSG_KEX_ECDH_INIT debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user joeuser service ssh-connection method none SSH: Server;Ltype: Authname;Remote: 127.0.0.1-52212;Name: joeuser debug1: attempt 0 failures 0 debug1: Config token is loglevel debug1: Config token is logingracetime debug1: Config token is permitrootlogin debug1: Config token is rsaauthentication debug1: Config token is pubkeyauthentication debug1: Config token is authorizedkeysfile debug1: Config token is challengeresponseauthentication debug1: Config token is usepam debug1: Config token is allowtcpforwarding debug1: Config token is chrootdirectory debug1: Config token is subsystem debug1: PAM: initializing for "joeuser" debug1: PAM: setting PAM_RHOST to "localhost" debug1: PAM: setting PAM_TTY to "ssh" debug1: userauth-request for user joeuser service ssh-connection method password debug1: attempt 1 failures 0 debug1: do_pam_account: called Accepted password for joeuser from 127.0.0.1 port 52212 ssh2 debug1: monitor_child_preauth: joeuser has been authenticated by privileged process debug1: PAM: establishing credentials User child is on pid 9129 debug1: Entering interactive session for SSH2. debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 65536 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request pty-req reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_new: session 0 debug1: session_pty_req: session 0 alloc /dev/pts/1 debug1: server_input_channel_req: channel 0 request shell reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req shell debug1: Setting controlling tty using TIOCSCTTY. debug1: Received SIGCHLD. debug1: session_by_pid: pid 9130 debug1: session_exit_message: session 0 channel 0 pid 9130 debug1: session_exit_message: release channel 0 debug1: session_by_tty: session 0 tty /dev/pts/1 debug1: session_pty_cleanup: session 0 release /dev/pts/1 Received disconnect from 127.0.0.1: 11: disconnected by user debug1: do_cleanup debug1: do_cleanup debug1: PAM: cleanup debug1: PAM: closing session debug1: PAM: deleting credentials Here you have the full output of sshd -dd, together with ssh -vv. Bash: # bash --version GNU bash, version 3.2.49(1)-release (arm-none-linux-gnueabi) Copyright (C) 2007 Free Software Foundation, Inc. The bash binary was cross compiled from source. I also tried using a pre-compiled binary from the Optware distribution, but had the exact same problem. I checked for missing shared libraries using objdump -x, but they're all there. Any ideas what could be causing this "Permission denied, please try again."? I'm almost diving in the bash source code to investigate, but trying to avoid hours chasing something that may be silly.

  Read the article

• Zabbix server sends too many notifications

  - by anselmdk

  I've recently installed Zabbix server on a VPS and am very happy with it. I've installed the client on appr. 6-7 other VPSs and everything works fine. The interface is smooth, and it produces some very nice graphs. My only problem with the software is that I've set it up to send notifications on problems, but im receiving between 30 and 60 emails every day. Always something along "Server XXX is unreachable: PROBLEM", and a minute later: "Server XXX is unreachable: OK". Off course, Zabbix also recognizes when there are real problems, and e.g. when a server has been restarted. It just seems to me as if Zabbix very fast "gives up", or maybe times out faster than what suits my needs. I've been trying to google this problem several times, but given up, so now I'm trying this approach. Does anyone know of how to adjust the fidelity of these notifications/triggers?

  Read the article

• UPNP/DLNA music player for Windows?

  - by DM8

  I'm looking for a UPNP/DLNA Client for Windows. The server is MediaTomb on a Ubuntu box. The clients are Windows (any, XP and up). I'm looking for a simplistic music player program but failed to identify any. I'm hoping for something in the style of Winamp or Windows Media Player. I've looked, but so far only been able to achieve playback on Windows with HTPC-ish software like XBMC, and on an android cellphone (several players for that there, all worked fine). Edit: Just to clarify, I'm not looking for an HTPC Suite (IE XBMC), I'm looking for a regular-looking music player.

  Read the article

• What is the best way to clone Win7 machines?

  - by John Hoge

  I'm looking to buy 5 new Win7 boxes and would like to ease deployment by cloning the OS. What I would like to do is install a fresh OS (Dell doesn't seem to sell machines without preinstalled crapware anymore) and then install a few apps on the first one. Once it is just right, I want to clone the OS and install the image on the other four machines and just change the machine name. Is this possible to do without any extra third party software? What I am thinking of doing is backing up the disk image of the first machine to a network share, and then booting the others to the windows install DVD and restoring the same image on each machine. Has anyone had any luck with this technique?

  Read the article

• Disable the Old Adobe Flash Plugin in Google Chrome

  - by The Geek

  If you’ve just updated to the Dev or Beta release of Google Chrome, you might have noticed that a special version of Adobe Flash is now integrated into the default distribution of Chrome. But what about your old plug-in? As it turns out, the old plug-in is generally still installed… but you can easily disable Chrome plug-ins in the latest version, so let’s get to work. Disable the Extra Flash Plug-in Head over to about:plugins and look through the list—you should notice two Shockwave Flash plugins. The first one should be in your Google Chrome installation folder, and has the filename gcswf32.dll. This is the NEW one, so don’t disable it! If you keep scrollling down, you’ll see the old one, with the file name NPSWF32.dll. This is the OLD plugin, and you can safely disable it. Of course, if you only use Chrome you could just completely uninstall Adobe Flash from your system by heading into Control Panel’s Uninstall Programs screen, and then finding and uninstalling Adobe Flash Player Plugin. The ActiveX version is for Internet Explorer. We’ve not done any testing to see if the old Flash plugin is even still active or not, but may as well disable it just to be sure, right? Similar Articles Productive Geek Tips How To Disable Individual Plug-ins in Google ChromeSearch for Install Packages from the Ubuntu Command LineStop YouTube Videos from Automatically Playing in ChromeHow To Disable Javascript in Adobe Reader and Patch the Latest Massive Security HoleStupid Geek Tricks: Compare Your Browser’s Memory Usage with Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird

  Read the article

• How to configure a MInimal Ubuntu installation?

  - by Uri Herrera

  I recently re installed Ubuntu using the mini.iso, but much to my dismay the mini.iso is not configured the same way as the Ubuntu desktop ISO some "problems" I'm facing such as: An Installation using the regular Ubuntu CD recognizes my active network connections in Network Manager, Installing with the mini.iso gives me a working connection however no connections are "active" in Network Manager displaying the message "The system network services are not compatible with this version." In a regular Ubuntu install connecting an Android phone to the PC mounts the phone's internal memory and sd card if present, Using the mini.iso the phone is detected as it appears with the command lsusb but it's not mounted and can't be mounted. In the same regards using the phone to tether it's connection to the PC via USB, the phone is connected to my (wifi) IN the regular Ubuntu install the phone is recognized as a networking device and is used as connection usb0, while in the mini.iso nothing happens, and trying to add the connection to /etc/network/interfaces results in the OS crashing. Just to make sure It wasn't a matter of my user not having the correct permissions or a lack of "groups", I've checked with an Ubuntu VM and the groups are the same, the networking files are the same, and the packages (except those of ubuntu-desktop such as Unity, Firefox, LibreOffice, and other non-essential software) are Installed in my PC, so what else is there to look for?. I'm sure I'm missing something, and I'd prefer not to install Ubuntu again, using the regular cd. How can I manage to get the same behaviour/configuration without reinstalling ?

  Read the article

• High load (and high temp) with idle processes

  - by Nanne

  I've got a semi-old laptop (toshiba satellite a110-228), that's appointed 'laptop for the kids' by my sister. I've installed ubuntu netbook (10.10) on it because of the lack-of memory and it seems to work fine, accept from some heat-issues. These where never a problem under windows. It looks like I've got something similar to this problem: Load is generally 1 or higher, sometimes its stuck at 0.80, but its way to high. Top/htop only show a couple of percentage CPU use (which isn't too shocking, as i'm not doing anything). At this point all the software is stock, and i'd like to keep it that way because its supposed to be the easy-to-maintain kids computer. Now I'd like to find out: What could be the cause of the high load? Could it be as this thread implies, some driver, are there other options to check? How could I see what is really keeping the system hot and bothered? How to check what runs, etc etc? I'd like to pinpoint the culprint. further steps to take for debugging? The big bad internet leads me to believe that it might be the graphics drivers. The laptop has an Intel 945M chipset, but that doesn't seem to be one of the problem childs in this manner (I read a lot abotu ATI drivers that need special isntall). I'd not only welcome hints to directly solve this (duh) but also help in starting to debug what is going on. I am really hesitant in installing an older kernel, as I want it to be stock, and easy upgradeable (because I don't live near it, it should run without me ;) ) As an afterthought: to keep the whole thing cooler, can I 'amp up' the fancontrol? Its only going "airplane" mode when the computer is 95 Celcius, which is a tad late for my taste. Top: powertop:

  Read the article

• How do I figure out what is changing the userWorkstations attribute in Active Directory?

  - by Martin

  I just took over the IT for a medium sized business with a three domain controllers (2003/2008 Standard) and whenever I create a new user, after some time the user account cannot log into most machines on the network. I have traced this back to the "Log On To..." area becoming populated with a small list of machines. Even when I set the option to all computers, this list comes back after some time. I started hunting for vbs and ps1 scripts with the word "workstations" in them on all domain controllers to see if there is some kind of script to blame, but I have thus far come up empty handed. Is there a known software suite that can cause this (Microsoft Forefront, etc)? How can I figure out what is causing this list to change?

  Read the article

• Windows 7 Natively on Mac OS X Bootcamp, Airport Wifi Unable To Connect....

  - by Goober

  Hello! I am using a brand new MacBook Pro. I am running a copy of Windows 7 natively via bootcamp (No use of Virtual Machine Software at all). However the only way I can get Windows to connect to the internet is via ethernet, as opposed to the Macs Airport card picking up the wireless. It just refuses to connect, and gives me a limited access status. Any ideas!? I've run Windows XP natively via bootcamp and I had a few issues with the network constantly dropping out, however I blamed that on the drivers and the general shiteness of XP.... Help greatly appreciated.

  Read the article

• IT Asset Management

  - by CogitoErgoSum

  Our company has grown quite quickly and I am facing new tasks which I did not think I'd need to deal with. Recently we've come ot a point where we have 100+ Devices (Routers, Bridges, Computers, Laptops, VOIP Phones etc). The other day I was quite frightened when I asked for an inventory and no one had one. I want to start tagging all equipment and recording serials to begin tracking our inventory and ensuring we have a proper record of what equipment we have. Does anyone have advice as to how to go about 1. Convincing the higher ups why we need to do this and 2. What software or strategies might work? Keep in mind this is not for furniture, office equipment etc but IT specific equipment. I'm concerned over people 1. Stealing the physical devices and 2. Losing track of configuration data etc in case we'd need to do a wipe and restore

  Read the article

• What do Oracle VM Templates for JD Edwards EnterpriseOne 9.1 have to do with your Next Vacation!

  - by Monica Kumar

  Oracle VM Templates for JD Edwards EnterpriseOne 9.1 Update 2 and JD Edwards EnterpriseOne Tools 9.1.3.3 are now available for download from Oracle Software Delivery Cloud. So, what do Oracle VM Templates have to do with your next vacation? Well, how about time savings so you can plan for that next vacation and have the peace of mind since Oracle did the work and the testing for you!! What’s inside the new Oracle VM Templates release? The Oracle VM Templates for JD Edwards EnterpriseOne enables you to rapidly install JD Edwards EnterpriseOne. The complete stack includes: JD Edwards EnterpriseOne Applications Release 9.1 Update 2 JD Edwards EnterpriseOne Tools 9.1 Update 3, maintenance pack 3 (9.1.3.3) Oracle Database 11g Release 2 Oracle WebLogic Server 10.3.5 All pre-configured and pre-tested to run on Oracle Linux 5. Yes, the OS is included in the template! Oracle Business Intelligence Publisher 11.1.1.7.1 for use with JD Edwards EnterpriseOne One View Reporting JD Edwards EnterpriseOne Business Services Server and Oracle Application Development Framework (ADF) 11.1.1.5, for use with the JD Edwards EnterpriseOne Mobile Applications All pre-tuned to support up to 100 interactive users The templates can be installed to Oracle VM Server for x86 release 3.1 or later, to the Oracle Exalogic Elastic Cloud, and to the Oracle Database Appliance. Simply visit http://edelivery.oracle.com/oraclevm. Download and unzip the files and read the readme and you’re ready to go. How long would take you to install each of the components above, configure and tune them all from scratch? We know that you can get 7-10x faster deployment using the Oracle VM Templates. Now, how about that snorkeling trip to Belize!!

  Read the article

< Previous Page | 610 611 612 613 614 615 616 617 618 619 620 621  | Next Page >