Search Results

Search found 47655 results on 1907 pages for 'system restore'.

Page 619/1907 | < Previous Page | 615 616 617 618 619 620 621 622 623 624 625 626  | Next Page >

• Moving from Analogue PBX to digital VoIP?

  - by saint

  I don't even know if this belongs here?. If not, do let me know. So we have an analogue Alkatel PABX system in our little office. We have extensions, direct lines and PBX lines. We are trying to move to a more digital/flexible way of handling the phones and I've heard good things about FreeSwitch. I have zero knowledge about it. My biggest question is how would one handle existing phone lines with such a system. Surely there must be a way to make and receive calls from outside. Just a help in the right direction would be fine. Thanks.

  Read the article

• Multi serial devices on one port

  - by adopilot

  I am developing one software for managing parking lot. System is designed to use four HID RFID devices for authorization clients on gates. Each device should be connected to server by Serial port RS232. Now I wondering is there some device or method to join all that devices on one device and after that to I have only one RS232 cable connected to server. My problem is in that RFID card readers are simple (stupid) devices and there I am not able to change anything, but Ill like to know from which specific device is coming input. What Ill want to do with that new device which need to join four readers is to add suffix or prefix to string that sent from RFID card reader. So I can identify device that is sending card number to my server. I am developing my system on Win platforms.

  Read the article

• Can't create a registry key under Eventlog and I am in administrators group

  - by Tony_Henrich

  I am troubleshooting an installer problem where it's giving an error writing to a registry key. So when I use the Registry Editor (regedit) to create the same key under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog, I get a "Cannot create key: Error writing to the registry". Looking at the permissions, administrators have full access and I am a member of that group. I can create entries in other areas in the registry. When I try to take ownership, I see my name already listed. But then I get an error "Unable to set new owner on Eventlog. Insufficient system resources exist to complete the requested service". I tried after a new reboot. I turned off my firewall (Comodo). Why can't I create a new key when I am an admin and permissions indicate I have full control?

  Read the article

• Reboot VPS by reaching memory limit

  - by Ali

  When a server uses memory more than available RAM, the system will shut down the virtual machine. Then, it is only possible to boot from outside (VPS control panel, e.g. vePortal or SolusVM). However, it should be possible to plan a reboot before possible shut down. What is the best practical method to check the used memory, and reboot the system upon reaching e.g. 90% of the allowed RAM? Is there a common program or script to do so? I am using Debian/Ubuntu.

  Read the article

• Why is VMware vSphere Client hanging at the console?

  - by David

  When I use the vSphere Client (against an ESXi 4.1 server) it hangs a lot. It's always at the same place - using the console on a VM. The console stops responding - and a lot of times, the management window stops responding as well. The operating system won't close the window (as the application isn't responding) and requires a force close. I've had the console refuse to give up the mouse, and have had the console freeze with the cursor in the top left (before any VM software starts, maybe?). The environment is this: the system is a Dell laptop running Ubuntu 10.10 (Maverick) fully updated with VirtualBox OSE running Windows XP (also fully updated). The vSphere Client is running in the Windows XP VM. Got all that? How do I keep these hangs from happening? It is very aggravating. I'm still trying just to get the VM loaded with Ubuntu Server...

  Read the article

• Windows OEM vs retail difference

  - by tjameson

  My laptop has an OEM version of Vista Home Premium 32-bit. I need to reinstall Windows, and I've made sure that disk I have downloaded is the same as the one on my system (32-bit Home Premium). Is the retail version the same as the OEM? I only have a retail copy but I have an OEM license. Will I have any problems reactivating my copy of windows? Note, my HW hasn't changed. Note: I saw this post already, but I don't have an OEM disk: Installing XP with out manufacturers original XP restore disk, possiable with OEM disk?

  Read the article

• Virtual PC - Display Issue with Ubuntu Server

  - by Christopher R

  Hi Everyone, I just did a clean install of Ubuntu Server 9.04 in Virtual PC on the Windows 7 RC, and it seems to be having a bit of an issue with the virtual machine's display adapter. I've tried setting a VGA flag in the GRUB configuration to no avail. This is a guess, but I think it has something to do with the color console mode that gets enabled by default at boot time. The system starts booting just fine (i.e. the console looks "normal" when I'm asked to enter an LVM passphrase, etc.), but then the display goes wonky after a few seconds and I end up with this. Typing commands in bash works just fine: it's not like the system is frozen or anything, I just can't see anything that I type. The console looks exactly the way it does in the image below.

  Read the article

• Hibernating and booting into another OS: will my filesystems be corrupted?

  - by Ryan Thompson

  Suppose I have Windows and Linux installed on the same computer. If I hibernate Windows, can I boot into Linux without corrupting the Windows filesystem when I resume Windows? What about the other way around? What if I hibernate one, boot into the other, and mount the hibernated filesystem read/write? Read-only? If this is unsafe, is there any way to detect the hibernated state of the other OS and prevent mounting its filesystem? Basically, how far can I push this before it breaks, and how dangerous is it near the edge? I think I know the answers to some of the above questions, but for other ones, I have no idea, and for obvious reasons I have not tested this on my own computer. If someone has tested these, please enlighten the rest of us. I'm not necessarily looking for a specific answer to every question; I'll accept any response that answers a reasonable portion. EDIT: Let me clarify that when I say "hibernate," I mean the process of writing the contents of RAM to the hard disk and completely powering down the computer. In this state, powering the computer back on brings you through the BIOS and bootloader again, and you could theoretically select another operating system on a multi-boot system. Anyway, on with the original question: RESULTS Ok, after everyone's assurances that this would work, I tested it for myself. I set up Ubuntu to remount all ntfs filesystems and external drives read-only before hibernating. There was no need for a similar Windows setup because Windows does not read Linux filesystems. Then, I tried alternately hibernating one operating system and resuming the other, back and forth a few times. I even tried mounting the Windows filesystem from Ubuntu read-write, and creating a few files. Windows didn't complain when I resumed. So, in conclusion, you can more or less freely hibernate in a dual-boot Windows/Linux scenario. Note that I did not test a dual Linux/Linux co-hibernation situation. If you have two or more Linux installs and you hibernate one of them, you might be able to corrupt the filesystem by mounting it from another.

  Read the article

• Looking for a Software to harden Windows machines

  - by MosheH

  I'm a network administrator of a small/medium network. I'm looking for a software (Free or Not) which can harden Windows Computers (XP And Win7) for the propose of hardening standalone desktop computers (not in domain network). Note: The computers are completely isolated (standalone), so i can't use active directory group policy. moreover, there are too many restriction that i need to apply, so it is not particle to set it up manual (one by one). Basically what I’m looking for is a software that can restrict and disable access for specific user accounts on the system. For Example: User john can only open one application and nothing else -- He don’t see no icon on the desktop or start menu, except for one or two applications which i want to allow. He can't Right click on the desktop, the task-bar icons are not shown, there is no folder options, etc... User marry can open a specific application and copy data to one folder on D drive. User Dan, have access to all drives but cannot install software, and so on... So far ,I've found only the following solutions, but they all seems to miss one or more feature: Desktop restriction Software 1. Faronics WINSelect The application seems to answer most of our needs except one feature which is very important to us but seems to be missing from WINSelect, which is "restriction per profile". WINSelect only allow to set up restrictions which are applied system-wide. If I have multiple user accounts on the system and want to apply different restrictions for each user, I cant. Deskman (No Restriction per user)- Same thing, no restriction per profile. Desktop Security Rx - not relevant, No Win7 Support. The only software that I've found which is offering a restriction per profile is " 1st Security Agent ". but its GUI is very complicated and not very intuitive. It's worth to mention that I'm not looking for "Internet Kiosk software" although they share some features with the one I need. All I need is a software (like http://www.faronics.com/standard/winselect/) that is offering a way to restrict Windows user interface. So IF anybody know an Hardening software which allows to set-up user restrictions on Windows systems, It will be a big, big, big help for me! Thanks to you all

  Read the article

• Automatically wake up notebooks not on the ethernet

  - by gletscher

  I am looking for an automated backup system and I like bacula. I have 3 Notebooks and a Desktop computer that need regular backup. Now I don't want to let them run all night just to do the backuping, so I was thinking I could use wake-on-lan to have bacula wake up the machines, then do the backups, and shut them down afterswards. While this may work with devices on the ethernet, it won't work with the Notebooks on the wifi. So is it possible to have the Notebooks schedules to automatically wake up from suspend or shutdown ? Or is it possible to interject a shutdown command if it is after a certain hour and call the bacula director to start the backup now? I'm new to controlling the linux system using scripts, so any hints on how and where to start are greatly appreciated. Thanks alot for your help, input and ideas.

  Read the article

• Mountable online storage (no syncing)

  - by Sam

  I have a Linux VPS that I would like to turn into a media server. Like most cheap VPS's, it has a fairly small storage capacity. What I would like to do is attach the box to an online backup system such as SpiderOak or DropBox, where the files would reside and be directly accessible to either a webserver or media server software. Since the VPS hdd is small, I do not want the files to be synced to it. I would like a storage system that is online only. Ideally mountable like a network drive. Are there any services that suit my needs, or workarounds for services such as SpiderOak that do not require syncing?

  Read the article

• How to clone and deploy multiple machines?

  - by Mimi

  Hi, See what I wanna do is basically make bootable clones or disc images or whatever(let's call it "stuff" for now ) and store many of them in a single big HDD. Then, I wanna use that big HDD and the "stuff" in it to be able to deploy new machines without the hassle of reinstalling Windows and whatnot(i.e. I do not want to restore nor simply clone a same machine, I literally want to use clones to save time during machine set up). Obviously I'd deploy the "stuff" onto an HDD going into a machine that I know the hardware of to avoid driver issues and whatnot. I alos have enough Windows keys to deal with the multiple activations. I tried using Acronis True Image but it doesn't seem to do what I want(unless idk how to use it properly). Any advice is welcome thanks :)

  Read the article

• Hardware upgrade: Windows 7 bluescreens, Vista loads

  - by Daniel Schaffer

  I just did a fairly significant hardware upgrade while keeping my hard disks. The old system was a dell Optiplex 745 with an Intel Core 2 duo, LGA 775. The new system is custom built, Intel i5 750. I know you're supposed to do a clean install with a hardware upgrade like this, but I'd had success in the past doing the stealth hardware upgrade like this, so I figured I'd give it a shot. Windows 7 Ultimate 64 bit gets through the loading screen and immediately blue screens and reboots. Windows Vista Home Premium 32-bit, which I have on an old hard drive from an AMD box (!!) loads up fine. I ran through the windows memory checker just to be sure, and my memory is fine. So, is the BSOD the result of some sort of protection mechanism specific to Windows 7? Is there any hope of salvaging that install?

  Read the article

• Firefox 4 is displaying all text as "bold"

  - by Mateo

  I installed Firefox 4 this morning excited to checkout some of the new HTML 5 features that have been implemented and found that all text was displayed in a bold font. Here is the comparison with what Firefox 4 is displaying on my machine and Chrome. It is getting really annoying. So far I've... Emptied the cache/history/etc. Re-installed the various core fonts (Arial, Courier, Times New Roman, etc.) Checked the font defaults in FF4. The interesting part to me is that I had FF3.6x on this machine with no problems whatsoever and now this. Any ideas? System Description Windows 7 (x64) Update I just found out that this is happening in IE9 (final) as well. Must be something with the system fonts. Like I said before, this wasn't happening pre-FF4.

  Read the article

• Partition table correpted in windows 7 machine as simple dynamic partition

  - by raki

  I have Windows 7 installed in my system. When I originally partitioned it I made 3 partitions and 16 gb space as unallocated. Later I tried to create a partition using this free space using diskmanagement tool. It shows free space as unusabe space and the only one option available is to make it as a simple partition. Unfortunately I made it as simple partition and all my partitions converted to simple dynamic partition. Now after reboot the OS is not loading. I tried to reinstall the OS by formatting the C drive, but it doesn't work. Now I can't load the OS properly. How can I install Windows 7 on my system without losing my data on the other two drives?

  Read the article

• USB ports not recognizing devices (vista)

  - by frank

  I'm trying to fix a problem on a Vista machine where all the USB ports seem to have power but they don't recognize devices plugged into them. It seemed to start after I plugged my mp3 player (sansa clip) into it and disconnect it. So it sounds similar to this article http://support.microsoft.com/kb/817900 but that was for XP. And I did try all the fixes (including the registry entry) but they did not help. It also sounds similar to this SU question 50110 but I don't think it is the mother board. I have see other places that suggest reinstalling the OS...but that seems like a last resort type of thing. I have also seen a suggestion of doing a system restore but not sure if that will help. Any ideas of what I can try?

  Read the article

• windows service application run fine on windows XP but crashes on windows7

  - by Abbas Siddiqui

  I am sorry If my question asked before, I search extensively but didn't found. If present please post the link of that question. I have developed windows service that works fine on windows xp , when I installed it on windows7 it installed and works fine for few minutes, after that is crashes and gives the following error message. has stopped working windows is checking for the solution to the problem. the log entry is as follows Fault bucket 1155193276, type 5 Event Name: CLR20r3 Response: Not available Cab Id: 0 Problem signature: P1: windowsserviceapp.exe P2: 1.0.0.0 P3: 4bf29a85 P4: System.Windows.Forms P5: 2.0.0.0 P6: 4a275ebd P7: 16cf P8: 159 P9: System.ComponentModel.Win32 P10: Attached files: C:\Users\DELL\AppData\Local\Temp\WERF98D.tmp.WERInternalMetadata.xml These files may be available here: C:\Users\DELL\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_windowsserviceap_89ea5da5168ff1535681aa613b5f7bf2b1636dc_111d24f1 Analysis symbol: Rechecking for solution: 0 Report Id: 24dc8c83-62a1-11df-b1ee-00271352d813

  Read the article

• how to disable isight auto adjustments ?

  - by George Profenza

  The built-in isight cam on my macbook machine keeps re-adjusting the lighting (and focus I think). I need to manually set those, but I found nothing of any use in System Preferences or System Profiler. Any way to access the settings ? Any magic terminal commands that allows access to the camera ? Anyone has a driver that allows for any camera access ? 'mac - it just works'...sure, if you want to use it like a kid. the second you actually want to do something with you mac other than the basic things, you can do on ANY regular machine anyway, your 'rights' are done with, as apple seems to only encourage dumb clients. I'm not saying saying this applies to all mac users, but the 'typical/average' one in my view is only going to use it for media(music,video) and web(facebook,blogging, all that) and maybe podcasting,webcasting,etc....ok this is turning into a rant, so I will finish here.

  Read the article

• No login prompt displayed after updating Ubuntu 10.04, broken gdm

  - by cliff

  So here's what happens: I updated my system the other day, was prompted for a reboot for the update to complete but was in the middle of working so I delayed it until after I was done. I reboot and it's broken :(. It appears to boot normally, with the following exceptions: The purple Ubuntu load screen no longer displays (though it did for the first couple of times I tried to get in). I hear the login prompt sound, but no login prompt appears. Nor is it simply "invisible" - pressing enter, typing my password, and pressing enter again do nothing. Normally my Bluetooth mouse is functional at this point, but it is not. GRUB displays recovery options for my current kernel, and for an older one (2.6.32-24). Trying to boot into .32-24 gives me an error saying "udevadm can't do something while udev is not configured". So I try solutions listed here: http://superuser.com/questions/195786/ubuntu-update-went-wrong-pc-doesnt-boot-how-can-i-repair-it Nothing I tried seemed to work, and after further Googling my hunch is that it's a problem with gdm. Please correct me if I'm wrong, I don't know all that much about how Linux/Ubuntu systems work just yet. Things I'm able to do: Boot to a live CD Ctrl-Alt-F2 after that login sound plays brings me to a console login, which I can successfully do (it's how I tried the solutions above). This works only under the current kernel. A hack I'd be willing to explore is removing the login prompt from the console, but I'd prefer to "simply" fix what's wrong. Like that guy, I need to repair the system rather than reinstall. System: Dell Inspiron 1525 Core 2 Duo Proprietary Driver for Broadcom 43xx wireless Dual-boot with Windows 7 (which is how I'm posting this, unfortunately I only have this machine and any experimenting requires constant reboots into Windows/brokenbuntu) Last package installed was Moonlight, but it appeared to install properly. Kernel: 2.6.32-25 Edit: After working with Karl's suggestions, it seems that the problem is with gdm. Error exit status 245 when attempting to sudo apt-get install --reinstall gdm, also an error processing gdm when running sudo apt-get -f install. How do I reinstall or repair gdm so that I can get back into my machine?

  Read the article

• Database checksum features - redundant? useful?

  - by Eloff

  Just about every mainstream DB has a feature to calculate checksums per page, per sector, or per record. Now for a DB that does full recover after any crash, like PostgreSQL, is a checksum even useful? There will be no data loss as long as the xlog is ok, no matter what kind of corruption happened to the data itself, as the redo log is replayed every committed transaction will be restored. So checksums are useless on restore. Doesn't the filesystem or disk keep checksums anyway to detect corruption? So unless the checksum is per record, all it does is tell you there is corruption - which the OS should be yelling at you the minute you try to read it - so useless in operation? I can't imagine how a checksum can be helpful in any sane database - but since they all use them - I'd say that's just failure of imagination on my part. So how is it useful?

  Read the article

• Configure Windows XP Embedded to automatically dismiss unexpected MessageBoxes

  - by Pokot0

  I have the need to configure a Windows XP Embedded system in order to dismiss modal MessageBoxes with a default reply. I am aware of the EnableDefaultReply feature but I need to be more selective on which MessageBoxes to dismiss or select the default reply on some criteria (example: name of the window). My biggest problem right now is that: If do not enable the EnableDefaultReply feature: some background services pop up dialogboxes which are never dismissed and block the application If I enable the EnableDefaultReply feature: I am no longer able to logon to the system if another user is logged in (a MessageBox popups asking if you want to steal the logon and the default answer is NO). Do you have any experience you can share with this problem?

  Read the article

• Resetting Mac OS X administrator password without a disk

  - by Simon Sheehan

  I'm currently in possession of an eMac G4 running OS X 10.4. I went to install some software, and found I didn't actually have the password. No one seems to know it, and it's not written down anywhere. These were purchased by the school many years ago and are not really maintained, since people just used Garageband mostly. I went to look for the restore disk, and its nowhere to be found. How can I reset the password without a disk?

  Read the article

• The bcdedit export operation fails. windows vista not booting.

  - by ocurro

  I'm fixing my boot record with bootrec.exe, the first command goes: C:\>bcdedit /export c:\BCD_Backup Immediately I receive this error here: The store export operation has failed. The requested system device cannot be found. Likewise, the next command fails, because bcd file is missing: C:\>attrib bcd -s -h -r Lastly, when trying the next command, all it returns is "The requested system device cannot be found". C:\>bootrec /RebuildBcd I'm using Windows 7 setup image to operate. Have Vista installed atm. Has it happened to you? I'd appreciate some orientation.

  Read the article

• Listing pending reboots in windows

  - by Jake

  I'm trying to install SQL Server 2008 on a Windows Server 2008 x86 system, and I'm getting an error saying "Rule 'Restart computer' failed." I've already found a lot of people saying to clear the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations, but sadly this key doesn't even exist in the registry on my server. I know I've run into this exact problem before, and that remedy did not work the previous time either. I eventually found a way to list the processes that currently require a reboot in Windows, which I used as a guide for what to uninstall. I cannot, for the life of me, find out how to do that again. Does anyone know how to list the pending required reboots in windows via command line or some other tool?

  Read the article

• How to view bad blocks on mounted ext3 filesystem?

  - by Basilevs

  I've ran fsck -c on the (unmounted) partition in question a while ago. The process was unattended and results were not stored anywhere (except badblock inode). Now I'd like to get badblock information to know if there are any problems with the harddrive. Unfortunately, partition is used in the production system and can't be unmounted. I see two ways to get what I want: Run badblocks in read-only mode. This will probably take a lot of time and cause unnecessary bruden on the system. Somehow extract information about badblocks from the filesystem iteself. How can I view known badblocks registered in mounted filesystem?

  Read the article

< Previous Page | 615 616 617 618 619 620 621 622 623 624 625 626  | Next Page >