Search Results

Search found 2726 results on 110 pages for 'processor'.

Page 62/110 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• Virtual PC and hardware-assisted virtualization (VT-x) problem

  - by Vesa Huovi

  I've installed Microsoft's Virtual PC on Windows 7, but when I try to start a virtual machine I get the following error message: '<Virtual machine name' could not be started because hardware-assisted virtualization is disabled. Please enable hardware virtualization in the BIOS settings and try again. If hardware virtualization settings is already enabled, you may have to disable Trusted Execution Technology (TXT) setting in BIOS or update the system BIOS. However, if I download and run the Hardware-Assisted Virtualization Detection Tool, it gives the following positive message: This computer is configured with hardware-assisted virtualization. This computer meets the processor requirements to run Windows Virtual PC. If this computer runs a supported edition of Windows® 7, you can install Windows Virtual PC. I've also used the MSR Walker in the third-party utility CrystalCPUID to examine MSR 0x3a on both processors on my system, and it's 0x5 (0x4 = VT enabled, 0x1 = VT lock), as expected. Does anyone have any ideas of what else to check? Thanks.

  Read the article

• Adding FK Index to existing table in Merge Replication Topology

  - by Refracted Paladin

  I have a table that has grown quite large that we are replicating to about 120 subscribers. A FK on that table does not have an index and when I ran an Execution Plan on a query that was causing issues it had this to say -- /* Missing Index Details from CaseNotesTimeoutQuerys.sql - mylocal\sqlexpress.MATRIX (WWCARES\pschaller (54)) The Query Processor estimates that implementing the following index could improve the query cost by 99.5556%. */ /* USE [MATRIX] GO CREATE NONCLUSTERED INDEX [<Name of Missing Index, sysname,>] ON [dbo].[tblCaseNotes] ([PersonID]) GO */ I would like to add this but I am afraid it will FORCE a reinitialization. Can anyone verify or validate my concerns? Does it even work that way or would I need to run the script on each subscriber? Any insight would be appreciated.

  Read the article

• how to optimize virtual box shared folders

  - by Nrew

  This is really pissing me off. No matter how much memory I put into the guest os(windows xp). It still hangs for about 365 days before you can access the file you want to access from the shared folder. What do I do to make things faster? Because after it hangs and not respond for 365 days. It will do it again for another 250 days. Ive even set the shared folder to permanent. This is a fairly decent machine: 2.50ghz processor(x64 architecture, but I have only 2Gb of memory so my host os is just 32 bit windows 7) hdd has much space left: 156 Gb free of 250Gb

  Read the article

• Autocorrect for "fat fingers" - MS Word

  - by Jamie Bull

  I'm wondering if anyone knows of a plug-in for MS Word which can handle key-presses of surrounding keys when typing at speed (rather like iPhone or Android autocorrect)? My use case is in transcribing interviews where I need to type quickly (even with the playback at half speed) - but I don't do this often enough to become a proficient touch typist. I will also be paying close attention to the text produced in subsequent analysis so I have a reasonable expectation that I'll catch any "hilarious" autocorrect errors. Any pointers to plug-ins which work at either a system level or within MS Word would be great. Even in an open source word processor at a pinch, though I'd miss the MS Word environment and my macros. Thanks.

  Read the article

• Installing Apache2 and PHP5 on a XServe G5 running 10.4

  - by Chris

  Hello- I have an Apple XServe G5, running OS X Server 10.4. I want to update my Apache installation from 1.3 to 2 and PHP to 5. I also want to install PHP GD support. I have scoured the internet for a guide on how to do this, but to no avail. I also tried to use Entropy to install PHP 5 several times, and it always manages to royally mess up my system. Obviously I can't install Leopard or Snow Leopard because it is a PowerPC processor. Can anyone give me any tips on how to get this software updated or point me to a guide? Thanks, Chris

  Read the article

• How to enable Hardware-assisted decoding in Ubuntu 9.10, specifically for Totem and/or Gnome MPlayer

  - by techtechmo

  Hi all, just wanted to ask about Hardware-assisted 720p video playback on an Intel Atom D510 machine, running on Ubuntu 9.10 Karmic Koala. When I use Boxee with Hardware Assisted Decoding activated, I am able to play 720p videos -- whether on the local harddisk drive or on a remote server, through LAN. However when I play the same 720p videos through Totem or through Gnome MPlayer, the resulting playback suffers from stuttering and slideshow-like slowdowns. Would it be possible to make 720p video playback on Totem and Gnome MPlayer more smooth given that my machine's processor in the Intel Atom D510? If yes, how? Boxee seems to manage, so I assume it should also be possible to tweak Totem and/or Gnome MPlayer to be able to do the same. As an added note, I the machine's OS is Linux Mint 8. Installed RAM is 2GB.

  Read the article

• Batch OCR for many PDF files (not already OCRed) ?

  - by David

  Hello, I use Google Desktop Search (I am on Vista) and not all my PDF files are recognized in my archive folder. It is normal as "PDF files that contain scanned images" are not indexed (http://desktop.google.com/support/bin/answer.py?hl=en&answer=90651) So I would like to OCR many of my PDF files that are not already OCRed. My goal : I give the program a folder and it search alone in the subfolders the PDF files that need to be converted into PDF-OCRed files. Note: In the past, if a PDF file was password protected, I removed the password with another batch (paying) tool: verypdf.com "pwdremover" Any (not too much expensive) idea ? I already tried : Finereader 6 pro on xp at the time, but there was no batch processor included... Paperfile paperfile.net which uses Tesseract code.google.com/p/tesseract-ocr/. But the OCR is only PDF to text, not PDF to PDF! There is also another project code.google.com/p/ocropus Thanks in advance ;)

  Read the article

• Laptop hot after format

  - by Dany Khalife

  I recently formatted an HP G62 Laptop and installed all drivers from the HP site that should be installed for this model. But i noticed a very strange behavior, using Coretemp, the temp is always above 50 (on idle) and reaches 70 very quickly sometimes (Critical is 90) If i open youtube or skype alone, i can get temperatures as high as 83. Normally it was around 32 (on idle) and reaches 70 when i open games but not youtube.... I have a i3 processor and AMD graphics so i am wondering if somehow it's a graphics card issue (since i3 has integrated graphics as far as i know) Device manager shows only AMD graphics card tho, not sure if i3 graphics should appear here too. Any ideas what i might have forgotten to do after the format ?

  Read the article

• Laptop hot after format

  - by Dany Khalife

  I recently formatted an HP G62 Laptop and installed all drivers from the HP site that should be installed for this model. But i noticed a very strange behavior, using Coretemp, the temp is always above 50 (on idle) and reaches 70 very quickly sometimes (Critical is 90) If i open youtube or skype alone, i can get temperatures as high as 83. Normally it was around 32 (on idle) and reaches 70 when i open games but not youtube.... I have a i3 processor and AMD graphics so i am wondering if somehow it's a graphics card issue (since i3 has integrated graphics as far as i know) Device manager shows only AMD graphics card tho, not sure if i3 graphics should appear here too. Any ideas what i might have forgotten to do after the format ?

  Read the article

• Windows update install hangs

  - by Richo

  I'm trying to deploy .Net 3.5 on an XP home SP2 machine for a customer. The install fails, with an error about WIC. Trying to install WIC on its own gave an error about not being able to verify the application, because the cryptographic service wasn't running. A reboot got that service running, but now the install just hangs on the "inspecting your current configuration" Task manager reports that DrWatson is doing a lot (constantly using 10% of processor time) but beyond that I don't know how to instrument what a Windows machine is doing, has anyone seen this before?

  Read the article

• HP Probook 4530s great specs, but lagging. Hard Drive?

  - by Mark

  I have this laptop, which has a i3 processor, 4gb memory, 7200rpm hard drive. So there is nothing wrong with the specs. Even when I have no applications open, simply closing and opening windows, lags. Or opening the start menu, or dragging icons across the desktop. sometimes even the cursor lags. So I checked out the resource monitor, and the resources using disk activity are svchost Avast ------- my antivirus, but not much System (PID 4) ------ This is using a huge chunk The total disk activity fluctuates between %50 - %100

  Read the article

• Video from vhs via USB capture device on Linux

  - by Juanlu001

  I want to transfer video from a VHS tape to my computer with Arch Linux, using a USB capture device that comes with Roxio Easy VHS to DVD, which I recently bought. I tried to plug in the device, and it was properly recognized. From /var/log/messages.log, em28xx #0: Identified as Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 (card=9) saa7115 3-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0) em28xx #0: Config register raw data: 0x50 em28xx #0: AC97 vendor ID = 0xffffffff em28xx #0: AC97 features = 0x6a90 em28xx #0: Empia 202 AC97 audio processor detected em28xx #0: v4l2 driver version 0.1.2 em28xx #0: V4L2 video device registered as video1 em28xx #0: V4L2 VBI device registered as vbi0 Is there any software that enables me to capture video coming from this device? I don't mind if it is console or GUI based.

  Read the article

• Does kern.hz still have any relevance in FreeBSD if "dynamic tick mode" is enabled?

  - by Frerich Raabe

  I'm running a FreeBSD 9.0 setup as a virtual machine in a KVM setup. In previous versions of FreeBSD it was common to force the kern.hz setting to a lower value so that the virtual machine does not keep the host busy because it's handling timer interrupts without having any work to do - the FreeBSD Handbook explains: The most important step is to reduce the kern.hz tunable to reduce the CPU utilization of FreeBSD under the Parallels environment. This is accomplished by adding the following line to /boot/loader.conf: kern.hz=100 Without this setting, an idle FreeBSD Parallels guest OS will use roughly 15% of the CPU of a single processor iMac®. After this change the usage will be closer to a mere 5%. However, in FreeBSD 9, the "dynamic tick mode" (aka "tickless mode") is the default, controlled by the kern.eventtimer.periodic setting which defaults to 0 (read: tickless mode). This makes me wonder - does the tip of lowering kern.hz still have any relevance for making FreeBSD 9 play nicely in a virtual machine setup?

  Read the article

• Dell Dimension 2400 problem

  - by murgatroid99

  I have a new problem with a Dell Dimension 2400 PC. Until yesterday or the day before, it was working fine, but today when I press the power button the light on the power button turns yellow instead of green, the fan behind the processor increases speed until it sounds like a jet engine, and the computer does not boot up. I cleaned out the dust in the computer so that is not the problem. Also, the fan was blowing cold air. Do any of you know what might be causing this and how I might be able to fix it?

  Read the article

• IBM X3200 M2 upgrade and VT-x / usb passthrough for esxi

  - by enzo

  Hi, I have an IBM server x3200 m2 4368-k1g. Only to understand, simply because on IBM support does not exist no more upgrades kit on sale... if I buy a xeon processor, for example x3330 (4core @ 2.6ghz), and put it on my motherboard... 1) it works? 2) on the bios (where now there is no trace about...) will compare a VT-x menu to select and enable? 3) with esxi, once the VT-x is on... I'll be able to have usb passthrough ? Thank you in advance for your reply

  Read the article

• AMD Phenom II X4 965 crossfire motherboard

  - by Nick

  I am trying to build a cheap mining rig. I wanted to use the AMD Phenom II X4 965 (HDZ965FBGMBOX) processor as it got very good reviews and benchmarks, and is inexpensive. However, I am having trouble finding motherboards with crossfire support for 2 GPUs. AMD's website only lists five compatible motherboards, of which only one has crossfire support. Worse, it is expensive and seems to be obsolete and no longer available. I have trouble believing that there are only five compatible motherboards for that CPU. Are there any low-end motherboards that are both compatible with the AMD Phenom II X4 965 and have CrossFire support? (Is there a way to find this sort of information, like a central site that lists motherboards and their technical specifications?)

  Read the article

• linux display drivers

  - by salman

  I've run into a major display problem on newly installed fedora 11, on my 6 years old pc which runs a pentium4 2.4 GHz processor, 1 gb ddr ram, intel 845 motherboard with integrated graphics card. When i open an image or play a video, my complete screen turns garbled. I simply cannot make out whats on my screen. With difficulty i have to close the image/video window and move around the folder window to clean the screen image. Is it because of my display drivers? How can i fix it? I also ran into mp3 plugins and flash issues which i was able to resovle. I'm new to linux, the sole purpose of isntalling it on my old pc was to learn linux but this display problem is frustrating me. Thanks, Salman

  Read the article

• Hybrid drive not booting faster than a normal HD

  - by Nigel Trotter

  I have used Windows 7 to create an image of my existing standard 160GB HD and copied this image back to a bigger 500GB Seagate hybrid drive. After copying the image to the hybrid I had to resize the partition, which was fine but after rebooting a few times to "teach" the hybrid, I have no increase in boot speed. It still takes 20-25 seconds to close down and then over a minute to start up. Is this something to do with the way the image lays itself on the drive indiscriminately? Do I need to load the OS on the drive from scratch to get the benefits? My PC with an i5 processor, is using AHCI mode.

  Read the article

• Is It Possible to Change Default Windows Idle Time for Task Scheduler?

  - by alharaka

  From the official Microsoft docs: Detecting the Idle State The Task Scheduler service will verify that the computer is in an idle state every 15 minutes. The computer is considered idle if all the processors and all the disks were idle for more than 90% of the past 15 minutes and if there is no keyboard or mouse input during this period of time. Besides, any presentation type application that sets the ES_DISPLAY_REQUIRED flag will make Task Scheduler to not consider the system as being idle. In Windows 7, Task Scheduler considers a processor as idle even when low priority threads (thread priority < normal) execute. Is there any way to change the time to less than 15 minutes minutes? Am I assuming this hard-coded and impossible? My Google-fu has eluded me so far and I found nothing, but wanted to check here before giving up.

  Read the article

• How can I be sure that the motherboard is dead and it's not another issue?

  - by Peter

  So I have and old computer with and Intel D101GGC motherboard and a pentium 4 cpu and award bios, with a long repeating beep and not passing POST. I tried: RAM checking, they are good and working on other computers Replacing the PSU with a tested one, and still having the same issue I assumed that the CPU is dead and tested 2 others they are both Celeron D processors I also tested the CPU of this computer on another one and it's working fine I also tried it without RAM and still have the same long beep I did all this after disconnecting all the other hardware like HDD and DVD drives. The only time I didn't get any beeps is after removing the CPU I don't know if the processor is needed for the beeps to work. So My questions are: is it normal to not get any beeps if we don't have a CPU installed ? am I missing something or is the motherboard dead ? and thanks in advance.

  Read the article

• Streaming media from linux server - low footprint is crucial

  - by Mike Haye

  I recently pre-ordered the Raspberry Pi. http://www.raspberrypi.org/faqs For those of you who don't know it, it's a machine with 256 mb ram and a 700 MHz processor for $35. I plan to run linux on an SD card on this machine and have it act as both a htpc, VPN and media server. In regard to the media server part, I need to find some linux software that has a small footprint, but allows me to stream media to other devices connected to the internet (preferably without having to install any additional software on the client machines) Also, I would love if the video could be compressed, so the data usage wouldn't be so big for the client machine (e.g. when I'm using my data plan on my smartphone ;) ) Thanks in advance for any answers :) Mike.

  Read the article

• Multi Monitor setup goes crazy after locking/unlocking Vista machine

  - by Farseeker

  Give me a 10-blade quad-processor quad-core Opteron centre and ask me to configure failover/load balancing and I'd be happy to, but the following problem has got me completely stumped. My Vista Business Professional machine, running Ultramon, has three monitors attached. When I lock the machine (to go to the delicious cafe around the corner), the monitor layout stays correct. When I unlock it, I watch as all my screens flicker (as they are being re-configured), and Vista chooses some crazy layout for the monitors. The most recent one is below, but it's never consistant. Any ideas what might cause this? It's Vista Business, with UltraMon 3.0 (exiting Ultramon makes no difference).

  Read the article

• HP Server bios boot delay

  - by jjrab

  I'm just going to throw this out there in case anyone else has run accross this... I have an HP DL320 G5p that had the motherboard replaced due to a faulty NIC port. After several calls to HP, two motherboard replacements, PCI riser card replacements, Processor replacement, and power supply replacement, the server takes approx. 10 minutes before it boots into the BIOS. It then boots up with no issues. We've run the HP smart start cd and performed the system tests and everything passed. All firmware has also been upgraded to the latest as well. Has anyone else seen this and found a fix? I am still working with HP, but there seems to be a struggle on their part to figure this out, so I'm curious to know if anyone else has experienced this and found a fix - thanks...

  Read the article

• Hypertransport sync flood error

  - by Carl B

  What is it? And what causes it? Is it only for uncorrectable DIMM Errors(Troubleshooting DIMM errors)? When an UCE occurs, the memory controller causes an immediate reboot of the system. During reboot, the BIOS checks the Machine Check registers and determines that the previous reboot was due to an UCE, then reports this in POST after the memtest stage: A Hypertransport Sync Flood occurred on last boot 3 BIOS reports this event in the service processor’s system event log (SEL) as shown in the sample IPMItool output There are what seems to be some suggested answers to include Bad Caps Bios verisons (happens in one version not the other) Graphics card issues Lack of power to the CPU The list of possible generators seems to target everything but the computer case. System Specs: Windows Home Premium 64 Motherboard - MSI790FX-GD70 (MS7577) / Bios v 1.9 (American Megatrensa Inc) Ram - Patriot G Series ‘Sector 5’ Edition 4GB DDR3 1600 CPU - AMD Phenom II X2 555 Black Edition Callisto 3.2GHz Socket AM3 80W (Note: unlocked 2 cores CPU Z ids it as phenom II x4 B55) Graphics - 2 x Radeon 5750 in crossfire PSU - ABS 900w HDDs - 2 Seagate 1.5 TB Sata SSD - 1 OCZ 120 GB Vertex Plus R2

  Read the article

• Diagnose Slow Video Playback during Editing [closed]

  - by chadejah Hunter

  Possible Duplicate: I Want To Start Editing Videos But My Computer Moves Slowly I am using Windows 7 Home Premium on a PC with AMD 64bit Athlon Processor 2850e @ 1.80GHz, 2GB RAM, and a NVIDIA GeForce 6150SE nForce 430 graphics card I am using Pinnacle Studio 15 HD Ultimate. While editing videos the program moves normally but the playback is slow. When I press play the sound is normal but the picture is really slow and choppy. When the sound ends the picture continues to play and it speeds up. I updated the video card today, restarting the PC but get the same behaviour. Does anyone have any suggestions what I can do to get video working smoothly while editing?

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >