Search Results

Search found 101927 results on 4078 pages for 'ms sql server'.

Page 621/4078 | < Previous Page | 617 618 619 620 621 622 623 624 625 626 627 628  | Next Page >

• Using Dropbox API instead of a FTP server for backing up DB/Source in your application.

  - by Somebody still uses you MS-DOS

  This is a small aplication scenario. Usually, when you have to do some backups of source code/database on your server, you use a second ftp server, a cronjob to tar.gz your db dumps and source files, and send this file to your ftp server from your application server. Dropbox created an API to use it's infrastrucutre. Since they provide 2gb for free accounts, I thought about being able to upload to it instead of a ftp server. So, if you do some freelance work, you can create a free account for each client and use this approach, maybe encrypting the files you send. You even gain a revision for each sent file, like a revison control system, for free, from the last 30 days. What do you think of this approach? Is it possible? And, more importantly: what are the security risks involved? (That's why I'm asking this on serverfault, since this POV from sysadmins will be more accurate). Thanks!

  Read the article

• Strange network issue (ZIP file fails CRC test over VPN)

  - by Joe Schmoe

  We have a server in the office running Windows Server 2003 Our office is connected to our datacenter via hardware VPN (Linksys RV082 router in the office to CISCO router in the datacenter). There is a job that runs on the server in the office that does following: ZIP certain files from the server using 7Zip, copy ZIP file to a network share in the office and verify ZIP integrity, copy ZIP file to a network share in the data center and verify ZIP integrity. Problem is - verifying ZIP integrity for the file in the data center always fails. However, if I run 7Zip on the server in data center that exposes that share ZIP file verifies just fine, so it is not actually corrupted during copy operation. Additionally, I tried running ZIP on other computers in the office to verify ZIP file on datacenter file share and it verifies OK. I tried plugging server to the same network port where my workstation is connected using different cable (my workstation doesn't exhibit this problem) and ZIP verification still fails. So the problem is local to that specific server. On network adapter properties for the server in question there is no "Advanced" tab where one can usually configure a lot of network settings. Network card driver is up to date (Windows Update doesn't find anything newer and Lenovo website doesn't have any drivers for Windows 2003 for this computer model). Is there any other way to configure network setting via command line? What settings could be relevant to this problem?

  Read the article

• Free Oracle Special Edition eBook - Server Virtualization for Dummies

  - by Thanos

  Oracle has released a quick and easy-to-read guide on Oracle Virtualization. Now available is "Server Virtualization for Dummies," an Oracle Special Edition eBook. Need to virtualize, but not sure where to start? Virtualization should make things simpler, not more complex. To learn more about how Oracle’s server virtualization solutions can help you eliminate complexity, reduce costs, and respond rapidly to changing needs, download Server Virtualization for Dummies, an Oracle Special Edition eBook. Simply discover how virtualization can make things simpler, from server consolidation to application deployment. This eBook guides you through a range of server virtualization topics, including Why virtualization is critical to transforming today's IT to tomorrow's cloud computing environment. How different types of virtualization are suited to different business needs How application-driven virtualization dramatically accelerates application deployment Oracle Virtualization delivers the most complete and integrated solution for building, flexible IT infrastructures—beyond just server virtualization consolidation. Learn how Oracle Virtualization's unique application-driven approach and integrated management offering helps to accelerate enterprise application deployment and simplify management of data center from disk to apps. All our Customers, prospects, and partners are welcome to follow this link to download an exclusive copy of Server Virtualization for Dummies, Oracle Special Edition today.

  Read the article

• Accessing Server-Side Data from Client Script: Using Ajax Web Services, Script References, and jQuery

  Today's websites commonly exchange information between the browser and the web server using Ajax techniques. In a nutshell, the browser executes JavaScript code typically in response to the page loading or some user action. This JavaScript makes an asynchronous HTTP request to the server. The server processes this request and, perhaps, returns data that the browser can then seamlessly integrate into the web page. Typically, the information exchanged between the browser and server is serialized into JSON, an open, text-based serialization format that is both human-readable and platform independent. Adding such targeted, lightweight Ajax capabilities to your ASP.NET website requires two steps: first, you must create some mechanism on the server that accepts requests from client-side script and returns a JSON payload in response; second, you need to write JavaScript in your ASP.NET page to make an HTTP request to this service you created and to work with the returned results. This article series examines a variety of techniques for implementing such scenarios. In Part 1 we used an ASP.NET page and the JavaScriptSerializer class to create a server-side service. This service was called from the browser using the free, open-source jQuery JavaScript library. This article continues our examination of techniques for implementing lightweight Ajax scenarios in an ASP.NET website. Specifically, it examines how to create ASP.NET Ajax Web Services on the server-side and how to use both the ASP.NET Ajax Library and jQuery to consume them from the client-side. Read on to learn more! Read More >

  Read the article

• CloudBerry Online Backup 1.5 for Windows Home Server

  - by The Geek

  Overview CloudBerry Online Backup version 1.5 is a front end application for Amazon S3 storage for backing up your Windows Home Server data. It makes backing up your essential data to Amazon S3 an easy process in the event the disaster strikes. Installation You install the Cloudberry Addin as you do for any addins for Windows Home Server. On a PC on your network, browse to the shared folders on your server and open the Add-Ins folder and copy over WHS_CloudBerryOnlineBackupSetup_v1.5.0.81S3o.msi (link below), then close out of the folder. Next launch the Windows Home Server Console, click Settings, then Add-Ins. Click on the Available tab and click the Install button. It installs very quickly, and when you get the Installation Succeeded dialog click OK. You will lose connection through the Console, just click OK, then reconnect. After reconnecting, you’ll see CloudBerry Backup has been installed, and you can begin using it. You can setup a backup plan right away or find out what’s new with version 1.5. Amazon S3 Account If you don’t already have an Amazon S3 account, you’ll be prompted to create a new one. Click on the Create an account hyperlink, which takes you to the Amazon S3 page where you can sign up. After reviewing the functionality of Amazon S3, click on the Sign Up for Amazon S3 button. Enter in your contact information and accept the Amazon Web Services Customer Agreement. You’re then shown their pricing for storage plans. The amount of storage space you use will depend on your needs. It’s relatively cheap for smaller amounts of data. Just keep in mind the more data you store and download, the more S3 is going to cost. Note: Amazon S3 is introducing Reduced Redundancy Storage which will lower the cost of the data stored on S3. CloudBerry 1.5 will support this new feature. You can find out more about this new pricing structure. Note: Keep in mind that after you first sign up for an Amazon S3 account, it can take up to 24 hours to be authorized. In fact, you may want to sign up for the S3 account before installing the Add-In. After you sign up for your S3 Account, you’ll be given access credentials which you can enter in and create a Storage Bucket name. Features & Use CloudBerry is wizard driven, straight-forward and easy to use. Here we take a look at creating a backup plan. To begin, click on the Setup Backup Plan button to kick off the wizard. Select your backup mode based on the amount of features you want. In our example we’re going to select Advanced Mode as it offers more features than Simple Mode. Select your backup storage account or create a new one. You can select a default account by checking Use currently selected account as default. Now you can go through and select the files and folders you want to backup from your home server. Check the box Show physical drives to get more of a selection of files and folders. This also allows you to backup files from your data drive as well. It has full support for drive extenders so you can backup your shares as well. The cool thing about Cloudberry is it allows you to drill down specific files and folders unlike other WHS backup utilities. Next you can use advanced filters to specify files and/or folders to skip if you want. There are compression and encryption options as well. This will save storage space, bandwidth, and keep your data secure. Purge Options allow you to customize options for getting rid of older files. You can also select the option to delete files from the S3 service that have been deleted locally. Be careful with this option however, as you won’t be able to restore files if you delete them locally. You have some nice scheduling options from running backups manually, specific date and time, or recurring daily, weekly or monthly. Receive email notifications in all cases or when a backup fails. This is a good option so you know if things were successful or something failed, and you need to back it up manually. Email notifications… Give your plan a name… Then if the summary page looks good you can continue, or still go back at this point if something doesn’t look correct and needs adjusting. That’s it! You’re ready to go, and you have an option to start your first backup right away. After you’ve created a backup plan, you can go in and edit, delete, view history, or restore files. Restoring Files using CloudBerry To restore data from your backups kick off the Restore Wizard and select the backup to restore from. You can select the last backup, a specific point in time, or manually browse through the files. Browse through the directory and select the files you need to restore. Choose the destination to restore the files to. You can select from the original location, a specific location, to overwrite existing files, or set the location as the default for future restores. If the files are encrypted, enter in the correct passwords. If the summary looks good, click on Next to start the restore process. You’ll be shown a progress bar at the bottom of the screen while the files are restored. After the process has completed, close out of the Restore Wizard. In this example we restored a couple of music files to the desktop of Windows Home Server… But as shown above you can save them to the original location, other network locations, or WHS shared folders. This can make it a lot easier to keep track of files you’ve restored. You can also access different options for CloudBerry by clicking Settings in WHS Console then CloudBerry Backup. Here you can set up a new storage account, check for updates, app options, Diagnostics, and send feedback. Under Options there are several settings you can tweak to get the best experience for your WHS backups. CloudBerry Web Interface Another nice feature is the CloudBerry Web Interface so you can access your data from anywhere you have an Internet connection. To check it out in WHS Console, click on the Backup Web Interface link…you’ll probably want to bookmark the link in your favorite browser. Note: This feature is still in beta and at the time of this review, the Web Interface wasn’t up and running so we weren’t able to test it out. Performance The Cloudberry app works very well through the Windows Home Server Console. The amount of time it takes to backup or restore your data will depend on the speed of your Internet connection and size of the files. In our tests, backing up 1GB of data to the Amazon S3 account took around an hour, but we were running it on a DSL with limited upload speeds so your mileage will vary. Product Support In our experience, the team at CloudBerry offered great support in a timely manner when contacting them. You can fill out a help request through a form on their website and they also have a community forum. Conclusion We were very pleased with CloudBerry Online Backup for WHS. It’s wizard driven interface makes it extremely easy to use, and offers comprehensive backup choices for your Amazon S3 account. CloudBerry will only backup files that have been modified, so if files haven’t been changed, they won’t be backed up again.They offer a free 15 day trial and is $29.99 after that for a full license. Once you buy the app you own it, and charges to your S3 account will vary depending on the amount of data you upload. If you’re looking for an effective and easy to use front end application to backup your Windows Home Server data to your Amazon S3 account, CloudBerry is a recommended affordable choice. Download CloudBerry for Windows Home Server Sign Up For Amazon S3 Account Rating Installation: 9 Ease of Use: 8 Features: 8 Performance: 8 Product Support: 8 Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerGMedia Blog: Setting Up a Windows Home ServerBackup Windows Home Server Folders to an External Hard DriveBackup Your Windows Home Server Off-Site with Asus WebstorageRemove a Network Computer from Windows Home Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox)

  Read the article

• Windows Server Certified as Secure Global Desktop Clients with EBS 12

  - by Steven Chan (Oracle Development)

  Oracle Secure Global Desktop provides secure access to centralized applications—Microsoft Windows, UNIX, mainframe, and midrange—from a wide variety of popular client devices, including Windows PCs, Oracle Solaris workstations, Linux PCs, and thin clients. Secure Global Desktop is certified for use with Microsoft Windows Server 2003 and 2008 virtualized environments acting as desktop clients connecting to Oracle E-Business Suite Release 12 environments.  32-bit and 64-bit versions of Microsoft Windows Server are certified. These combinations may also be used in conjunction with Oracle VM, if required. How does this work? For example, a Secure Desktop Client can connect to a Secure Global Desktop environment.  That environment can be running Microsoft Server 2008.  That environment can be used, in turn, as a "desktop client" to access Oracle E-Business Suite Release 12.1.3. Requirements EBS 12.1.3 + Windows Server 2008 R2 (64-bit) Secure Global Desktop version 4.6 or higher Internet Explorer 8 (32-bit and 64-bit) or Internet Explorer 9 (32-bit and 64-bit) JRE Plug-in 1.6.0_32 (32-bit and 64-bit) or later 1.6 releases EBS 12.1.3 + Windows Server 2008 (32-bit) Secure Global Desktop version 4.6 or higher Internet Explorer 8 (32-bit) or Internet Explorer 9 (32-bit) JRE Plug-in 1.6.0_32 (32-bit) or later 1.6 releases EBS 12.1.3 + Windows Server 2003 R2 (64-bit) Secure Global Desktop version 4.6 or higher Internet Explorer 8 (32-bit and 64-bit) JRE Plug-in 1.6.0_32 (32-bit and 64-bit) or later 1.6 releases EBS 12.1.3 + Windows Server 2003 R2 (32-bit) Secure Global Desktop version 4.6 or higher Internet Explorer 8 (32-bit) JRE Plug-in 1.6.0_32 (32-bit) or later 1.6 releases References Oracle Secure Global Desktop with E-Business Suite Release 12.1.3 (Note 1491211.1) Related Articles Oracle VM Templates Available for E-Business Suite 12.1.3 Support Policies for Virtualization Technologies and Oracle E-Business Suite Webcast Replay Available: Virtualization and Cloud Deployments of Oracle E-Business Suite

  Read the article

• Exam 70-630 - TS: Microsoft Office SharePoint Server 2007, Configuring

  - by DigiMortal

  It has been really quiet here but I wasted no time. I passed exam 70-630 - TS: Microsoft Office SharePoint Server 2007, Configuring and in this posting I will give you a short overview of this very-very easy exam exam. If you are not new to SharePoint Server 2007 and you have some development experiences then this is the easiest exam from Microsoft you have ever seen. There are 51 questions in this exam and two or four of them were not familiar to me. I took me about one hour to prepare for this exam and I got 964 of 1000. Okay, I have some years of experience as SharePoint developer but these questions seemed still too easy for me to be real. I mean based on this exam you cannot accurately say if somebody is able to configure SharePoint Server or not. I think this exam should be very easy also to SharePoint Server administrators who have at least some experience with supporting and maintaining production systems running on SharePoint Server 2007. Those who does not feel strong on SharePoint Server configuring my read a book suggested by Microsoft Learning site: Inside Microsoft® Office SharePoint® Server 2007. Exam 70-630 gives you Microsoft Certified Technology Specialist certificate

  Read the article

• Real tortoises keep it slow and steady. How about the backups?

  - by Maria Zakourdaev

    … Four tortoises were playing in the backyard when they decided they needed hibiscus flower snacks. They pooled their money and sent the smallest tortoise out to fetch the snacks. Two days passed and there was no sign of the tortoise. "You know, she is taking a lot of time", said one of the tortoises. A little voice from just out side the fence said, "If you are going to talk that way about me I won't go." Is it too much to request from the quite expensive 3rd party backup tool to be a way faster than the SQL server native backup? Or at least save a respectable amount of storage by producing a really smaller backup files?  By saying “really smaller”, I mean at least getting a file in half size. After Googling the internet in an attempt to understand what other “sql people” are using for database backups, I see that most people are using one of three tools which are the main players in SQL backup area:  LiteSpeed by Quest SQL Backup by Red Gate SQL Safe by Idera The feedbacks about those tools are truly emotional and happy. However, while reading the forums and blogs I have wondered, is it possible that many are accustomed to using the above tools since SQL 2000 and 2005.  This can easily be understood due to the fact that a 300GB database backup for instance, using regular a SQL 2005 backup statement would have run for about 3 hours and have produced ~150GB file (depending on the content, of course).  Then you take a 3rd party tool which performs the same backup in 30 minutes resulting in a 30GB file leaving you speechless, you run to management persuading them to buy it due to the fact that it is definitely worth the price. In addition to the increased speed and disk space savings you would also get backup file encryption and virtual restore -  features that are still missing from the SQL server. But in case you, as well as me, don’t need these additional features and only want a tool that performs a full backup MUCH faster AND produces a far smaller backup file (like the gain you observed back in SQL 2005 days) you will be quite disappointed. SQL Server backup compression feature has totally changed the market picture. Medium size database. Take a look at the table below, check out how my SQL server 2008 R2 compares to other tools when backing up a 300GB database. It appears that when talking about the backup speed, SQL 2008 R2 compresses and performs backup in similar overall times as all three other tools. 3rd party tools maximum compression level takes twice longer. Backup file gain is not that impressive, except the highest compression levels but the price that you pay is very high cpu load and much longer time. Only SQL Safe by Idera was quite fast with it’s maximum compression level but most of the run time have used 95% cpu on the server. Note that I have used two types of destination storage, SATA 11 disks and FC 53 disks and, obviously, on faster storage have got my backup ready in half time. Looking at the above results, should we spend money, bother with another layer of complexity and software middle-man for the medium sized databases? I’m definitely not going to do so.  Very large database As a next phase of this benchmark, I have moved to a 6 terabyte database which was actually my main backup target. Note, how multiple files usage enables the SQL Server backup operation to use parallel I/O and remarkably increases it’s speed, especially when the backup device is heavily striped. SQL Server supports a maximum of 64 backup devices for a single backup operation but the most speed is gained when using one file per CPU, in the case above 8 files for a 2 Quad CPU server. The impact of additional files is minimal.  However, SQLsafe doesn’t show any speed improvement between 4 files and 8 files. Of course, with such huge databases every half percent of the compression transforms into the noticeable numbers. Saving almost 470GB of space may turn the backup tool into quite valuable purchase. Still, the backup speed and high CPU are the variables that should be taken into the consideration. As for us, the backup speed is more critical than the storage and we cannot allow a production server to sustain 95% cpu for such a long time. Bottomline, 3rd party backup tool developers, we are waiting for some breakthrough release. There are a few unanswered questions, like the restore speed comparison between different tools and the impact of multiple backup files on restore operation. Stay tuned for the next benchmarks.    Benchmark server: SQL Server 2008 R2 sp1 2 Quad CPU Database location: NetApp FC 15K Aggregate 53 discs Backup statements: No matter how good that UI is, we need to run the backup tasks from inside of SQL Server Agent to make sure they are covered by our monitoring systems. I have used extended stored procedures (command line execution also is an option, I haven’t noticed any impact on the backup performance). SQL backup LiteSpeed SQL Backup SQL safe backup database <DBNAME> to disk= '\\<networkpath>\par1.bak' , disk= '\\<networkpath>\par2.bak', disk= '\\<networkpath>\par3.bak' with format, compression EXECUTE master.dbo.xp_backup_database @database = N'<DBName>', @backupname= N'<DBName> full backup', @desc = N'Test', @compressionlevel=8, @filename= N'\\<networkpath>\par1.bak', @filename= N'\\<networkpath>\par2.bak', @filename= N'\\<networkpath>\par3.bak', @init = 1 EXECUTE master.dbo.sqlbackup '-SQL "BACKUP DATABASE <DBNAME> TO DISK= ''\\<networkpath>\par1.sqb'', DISK= ''\\<networkpath>\par2.sqb'', DISK= ''\\<networkpath>\par3.sqb'' WITH DISKRETRYINTERVAL = 30, DISKRETRYCOUNT = 10, COMPRESSION = 4, INIT"' EXECUTE master.dbo.xp_ss_backup @database = 'UCMSDB', @filename = '\\<networkpath>\par1.bak', @backuptype = 'Full', @compressionlevel = 4, @backupfile = '\\<networkpath>\par2.bak', @backupfile = '\\<networkpath>\par3.bak' If you still insist on using 3rd party tools for the backups in your production environment with maximum compression level, you will definitely need to consider limiting cpu usage which will increase the backup operation time even more: RedGate : use THREADPRIORITY option ( values 0 – 6 ) LiteSpeed : use  @throttle ( percentage, like 70%) SQL safe :  the only thing I have found was @Threads option.   Yours, Maria

  Read the article

• iOS and Server: OAuth strategy

  - by drekka

  I'm trying to working how to handle authentication when I have iOS clients accessing a Node.js server and want to use services such as Google, Facebook etc to provide basic authentication for my application. My current idea of a typical flow is this: User taps a Facebook/Google button which triggers the OAuth(2) dialogs and authenticates the user on the device. At this point the device has the users access token. This token is saved so that the next time the user uses the app it can be retrieved. The access token is transmitted to my Node.js server which stores it, and tags it as un-verified. The server verifies the token by making a call to Facebook/google for the users email address. If this works the token is flagged as verified and the server knows it has a verified user. If Facebook/google fail to authenticate the token, the server tells iOS client to re-authenticate and present a new token. The iOS client can now access api calls on my Node.js server passing the token each time. As long as the token matches the stored and verified token, the server accepts the call. Obviously the tokens have time limits. I suspect it's possible, but highly unlikely that someone could sniff an access token and attempt to use it within it's lifespan, but other than that I'm hoping this is a reasonably secure method for verification of users on iOS clients without having to roll my own security. Any opinions and advice welcome.

  Read the article

• MS office word component runs only if the server is logged on with the same identity

  - by Murali

  Hi I have a webservices running on a server, which converts word document into pdf using word automation. I have given a windows network user account in the identity tab on the MS Office word component using the DCOMCNFG.exe. I am getting below mentioned error Exception Message: The message filter indicated that the application is busy. (Exception from HRESULT: 0x8001010A (RPC_E_SERVERCALL_RETRYLATER)) But, if I Remote Desktop into that server using the account mentioned in the components identity tab, then it works fine. If I logoff from that server then its giving the above error. Anyone got any idea!! Many thanks in advance

  Read the article

• Python - Linux - Connecting to MS SQL with Windows Credentials - FreeTDS+UnixODBC + pyodbc or pymssq

  - by Keith P

  There doesn't seem to be any great instructions for setting this up. Does anyone have any good instructions? I am a linux noob so be gentle. I did see another post that is similar, but no real answer. I have a couple of problems. FreeTDS doesn't "seem" to be working. I am trying to connect and I get the following message using the "tsql" command: "Default database being set to databaseName There was a problem connecting to the server" but it doesn't mention what the problem is. The error I get when I try to connect using pyodbc is: "pyodbc.Error: ('08S01', '[08S01] [unixODBC][FreeTDS][SQL Server]Unable to connect: Adaptive Server is unavailable or does not exist (20009) (SQLDriverConnectW)')" I tried something similar with pymssql, but I ran into similar issues. I keep getting errors that I can't connect, but it doesn't tell me why.

  Read the article

• How to restart a wcf server from within a client?

  - by djerry

  Hey guys, I'm using Wcf for server - client communication. The server will need to run as a service, so there's no GUI. The admin can change settings using the client program and for those changes to be made on server, it needs to restart. This is my server setup NetTcpBinding binding = new NetTcpBinding(SecurityMode.Message); Uri address = new Uri("net.tcp://localhost:8000"); //_svc = new ServiceHost(typeof(MonitoringSystemService), address); _monSysService = new MonitoringSystemService(); _svc = new ServiceHost(_monSysService, address); publishMetaData(_svc, "http://localhost:8001"); _svc.AddServiceEndpoint(typeof(IMonitoringSystemService), binding, "Monitoring Server"); _svc.Open(); MonitoringSystemService is a class i'm using to handle client - server comm. It looks like this: [CallbackBehavior(ConcurrencyMode = ConcurrencyMode.Reentrant)] [ServiceBehavior(InstanceContextMode = InstanceContextMode.Single, MaxItemsInObjectGraph = 2147483647)] public class MonitoringSystemService : IMonitoringSystemService {} So i need to call a restart method on the client to the server, but i don't know how to restart (even stop - start) the server. I hope i'm not missing any vital information. Thanks in advance.

  Read the article

• What are the general strategies for the server of an FPS multiplayer game to update its clients?

  - by Hooray Im Helping

  A friend and I were having a discussion about how a FPS server updates the clients connected to it. We watched a video of a guy cheating in Battlefield: Bad Company 2 and saw how it highlighted the position of enemies on the screen and it got us thinking. His contention was that the server only updates the client with information that is immediately relevant to the client. I.e. the server won't send information about enemy players if they are too far away from the client or out of the client's line of sight for reasons of efficiency. He was unsure though - he brought up the example of someone hiding behind a rock, not able to see anyone. If the player were suddenly to pop up where he had three players in his line of sight, there would be a 50ms delay before they were rendered on his screen while the server transmitted the necessary information. My contention was the opposite: that the server sends the client all the information about every player and lets the client sort out what is allowed and what isn't. I figured it would actually be less expensive computationally for the server to just send everything to the client and let the client do the heavy lifting, so to speak. I also figured this is how cheat programs work - they intercept the server packets, get the location of enemies, then show them on the client's view. So the question: What are some general policies or strategies a modern first person shooter server employs to keep its clients updated?

  Read the article

• Need some explanation about MS Ajax using PageMethods

  - by Ahmed Said

  I have a project that uses PageMethods to call functions on the server. The server functions (written in C#) return the values as array of strings, without doing any kind of serialization and in the client side (from Js) the accessing of the return values is by using static variable called arguments. I found that sometimes for some users (cases are not repro) sometimes an exception occured "WebServiceFailedException the server method 'Foo' returned invalid data. the 'd' property is missing from JSON." Some searching on google I found that people are serializing the return values using DataContractJsonSerializer class and in js accessing the return value using one of the callback function Example: function OnRequestComplete(result, userContext, methodName) { var Person = eval('(' + result + ')'); alert(Person.Forename); alert(Person.Surname); } So is the first technique is correct? or what?

  Read the article

• problem in start up my RMI server(under ISP) so that it can recieve remote calls over Internet.--Jav

  - by Lokesh Kumar

  i m creating a Client/Server application in which my server and client can be on the same or on different machines but both are under ISP. My RMI programs:- -Remote Intreface:- //Calculator.java public interface Calculator extends java.rmi.Remote { public long add(long a, long b) throws java.rmi.RemoteException; public long sub(long a, long b) throws java.rmi.RemoteException; public long mul(long a, long b) throws java.rmi.RemoteException; public long div(long a, long b) throws java.rmi.RemoteException; } Remote Interface Implementation:- //CalculatorImpl.java public class CalculatorImpl extends java.rmi.server.UnicastRemoteObject implements Calculator { public CalculatorImpl() throws java.rmi.RemoteException { super(); } public long add(long a, long b) throws java.rmi.RemoteException { return a + b; } public long sub(long a, long b) throws java.rmi.RemoteException { return a - b; } public long mul(long a, long b) throws java.rmi.RemoteException { return a * b; } public long div(long a, long b) throws java.rmi.RemoteException { return a / b; } } Server:- //CalculatorServer.java import java.rmi.Naming; import java.rmi.server.RemoteServer; public class CalculatorServer { public CalculatorServer() { try { Calculator c = new CalculatorImpl(); Naming.rebind("rmi://"+args[0]+":1099/CalculatorService", c); } catch (Exception e) { System.out.println("Trouble: " + e); } } public static void main(String args[]) { new CalculatorServer(); } } Client:- //CalculatorClient.java import java.rmi.Naming; import java.rmi.RemoteException; import java.net.MalformedURLException; import java.rmi.NotBoundException; public class CalculatorClient { public static void main(String[] args) { try { Calculator c = (Calculator)Naming.lookup("rmi://"+args[0]+"/CalculatorService"); System.out.println( c.sub(4, 3) ); System.out.println( c.add(4, 5) ); System.out.println( c.mul(3, 6) ); System.out.println( c.div(9, 3) ); } catch (MalformedURLException murle) { System.out.println(); System.out.println("MalformedURLException"); System.out.println(murle); } catch (RemoteException re) { System.out.println(); System.out.println("RemoteException"); System.out.println(re); } catch (NotBoundException nbe) { System.out.println(); System.out.println("NotBoundException"); System.out.println(nbe); } catch (java.lang.ArithmeticException ae) { System.out.println(); System.out.println("java.lang.ArithmeticException"); System.out.println(ae); } } } when both Server and client programs are on same machine:- i start my server program by passing my router static IP address:-192.168.1.35 in args[0] and my server starts...fine. and by passing the same Static IP address in my Client's args[0] also works fine. but:- when both Server and client programs are on different machines:- now,i m trying to start my Server Program by passing it's public IP address:59.178.198.247 in args[0] so that it can recieve call over internet. but i am unable to start it. and the following exception occurs:- Trouble: java.rmi.ConnectException: Connection refused to host: 59.178.198.247; nested exception is: java.net.ConnectException: Connection refused: connect i think it is due to NAT Problem because i am under ISP. so,my problem is that how can i start my RMI Server under ISP so that it can recieve remote calls from internet????

  Read the article

• Real time embeddable http server library required

  - by Howard May

  Having looked at several available http server libraries I have not yet found what I am looking for and am sure I can't be the first to have this set of requirements. I need a library which presents an API which is 'pipelined'. Pipelining is used to describe an HTTP feature where multiple HTTP requests can be sent across a TCP link at a time without waiting for a response. I want a similar feature on the library API where my application can receive all of those request without having to send a response (I will respond but want the ability to process multiple requests at a time to reduce the impact of internal latency). So the web server library will need to support the following flow 1) HTTP Client transmits http request 1 2) HTTP Client transmits http request 2 ... 3) Web Server Library receives request 1 and passes it to My Web Server App 4) My Web Server App receives request 1 and dispatches it to My System 5) Web Server receives request 2 and passes it to My Web Server App 6) My Web Server App receives request 2 and dispatches it to My System 7) My Web Server App receives response to request 1 from My System and passes it to Web Server 8) Web Server transmits HTTP response 1 to HTTP Client 9) My Web Server App receives response to request 2 from My System and passes it to Web Server 10) Web Server transmits HTTP response 2 to HTTP Client Hopefully this illustrates my requirement. There are two key points to recognise. Responses to the Web Server Library are asynchronous and there may be several HTTP requests passed to My Web Server App with responses outstanding. Additional requirements are Embeddable into an existing 'C' application Small footprint; I don't need all the functionality available in Apache etc. Efficient; will need to support thousands of requests a second Allows asynchronous responses to requests; their is a small latency to responses and given the required request throughput a synchronous architecture is not going to work for me. Support persistent TCP connections Support use with Server-Push Comet connections Open Source / GPL support for HTTPS Portable across linux, windows; preferably more. I will be very grateful for any recommendation Best Regards

  Read the article

• Sun Fire X4270 M3 SAP Enhancement Package 4 for SAP ERP 6.0 (Unicode) Two-Tier Standard Sales and Distribution (SD) Benchmark

  - by Brian

  Oracle's Sun Fire X4270 M3 server achieved 8,320 SAP SD Benchmark users running SAP enhancement package 4 for SAP ERP 6.0 with unicode software using Oracle Database 11g and Oracle Solaris 10. The Sun Fire X4270 M3 server using Oracle Database 11g and Oracle Solaris 10 beat both IBM Flex System x240 and IBM System x3650 M4 server running DB2 9.7 and Windows Server 2008 R2 Enterprise Edition. The Sun Fire X4270 M3 server running Oracle Database 11g and Oracle Solaris 10 beat the HP ProLiant BL460c Gen8 server using SQL Server 2008 and Windows Server 2008 R2 Enterprise Edition by 6%. The Sun Fire X4270 M3 server using Oracle Database 11g and Oracle Solaris 10 beat Cisco UCS C240 M3 server running SQL Server 2008 and Windows Server 2008 R2 Datacenter Edition by 9%. The Sun Fire X4270 M3 server running Oracle Database 11g and Oracle Solaris 10 beat the Fujitsu PRIMERGY RX300 S7 server using SQL Server 2008 and Windows Server 2008 R2 Enterprise Edition by 10%. Performance Landscape SAP-SD 2-Tier Performance Table (in decreasing performance order). SAP ERP 6.0 Enhancement Pack 4 (Unicode) Results (benchmark version from January 2009 to April 2012) System OS Database Users SAPERP/ECCRelease SAPS SAPS/Proc Date Sun Fire X4270 M3 2xIntel Xeon E5-2690 @2.90GHz 128 GB Oracle Solaris 10 Oracle Database 11g 8,320 20096.0 EP4(Unicode) 45,570 22,785 10-Apr-12 IBM Flex System x240 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 EE DB2 9.7 7,960 20096.0 EP4(Unicode) 43,520 21,760 11-Apr-12 HP ProLiant BL460c Gen8 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 EE SQL Server 2008 7,865 20096.0 EP4(Unicode) 42,920 21,460 29-Mar-12 IBM System x3650 M4 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 EE DB2 9.7 7,855 20096.0 EP4(Unicode) 42,880 21,440 06-Mar-12 Cisco UCS C240 M3 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 DE SQL Server 2008 7,635 20096.0 EP4(Unicode) 41,800 20,900 06-Mar-12 Fujitsu PRIMERGY RX300 S7 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 EE SQL Server 2008 7,570 20096.0 EP4(Unicode) 41,320 20,660 06-Mar-12 Complete benchmark results may be found at the SAP benchmark website http://www.sap.com/benchmark. Configuration and Results Summary Hardware Configuration: Sun Fire X4270 M3 2 x 2.90 GHz Intel Xeon E5-2690 processors 128 GB memory Sun StorageTek 6540 with 4 * 16 * 300GB 15Krpm 4Gb FC-AL Software Configuration: Oracle Solaris 10 Oracle Database 11g SAP enhancement package 4 for SAP ERP 6.0 (Unicode) Certified Results (published by SAP): Number of benchmark users: 8,320 Average dialog response time: 0.95 seconds Throughput: Fully processed order line: 911,330 Dialog steps/hour: 2,734,000 SAPS: 45,570 SAP Certification: 2012014 Benchmark Description The SAP Standard Application SD (Sales and Distribution) Benchmark is a two-tier ERP business test that is indicative of full business workloads of complete order processing and invoice processing, and demonstrates the ability to run both the application and database software on a single system. The SAP Standard Application SD Benchmark represents the critical tasks performed in real-world ERP business environments. SAP is one of the premier world-wide ERP application providers, and maintains a suite of benchmark tests to demonstrate the performance of competitive systems on the various SAP products. See Also SAP Benchmark Website Sun Fire X4270 M3 Server oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Two-tier SAP Sales and Distribution (SD) standard SAP SD benchmark based on SAP enhancement package 4 for SAP ERP 6.0 (Unicode) application benchmark as of 04/11/12: Sun Fire X4270 M3 (2 processors, 16 cores, 32 threads) 8,320 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, Oracle 11g, Solaris 10, Cert# 2012014. IBM Flex System x240 (2 processors, 16 cores, 32 threads) 7,960 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, DB2 9.7, Windows Server 2008 R2 EE, Cert# 2012016. IBM System x3650 M4 (2 processors, 16 cores, 32 threads) 7,855 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, DB2 9.7, Windows Server 2008 R2 EE, Cert# 2012010. Cisco UCS C240 M3 (2 processors, 16 cores, 32 threads) 7,635 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, SQL Server 2008, Windows Server 2008 R2 DE, Cert# 2012011. Fujitsu PRIMERGY RX300 S7 (2 processors, 16 cores, 32 threads) 7,570 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, SQL Server 2008, Windows Server 2008 R2 EE, Cert# 2012008. HP ProLiant DL380p Gen8 (2 processors, 16 cores, 32 threads) 7,865 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, SQL Server 2008, Windows Server 2008 R2 EE, Cert# 2012012. SAP, R/3, reg TM of SAP AG in Germany and other countries. More info www.sap.com/benchmark

  Read the article

• Installing Visual Studio Team Foundation Server Service Pack 1

  - by Martin Hinshelwood

  As has become customary when the product team releases a new patch, SP or version I like to document the install. Although I had no errors on my main computer, my netbook did have problems. Although I am not ready to call it a Service Pack problem just yet! Update 2011-03-10 – Running the Team Foundation Server 2010 Service Pack 1 install a second time worked As per Brian's post I am installing the Team Foundation Server Service Pack first and indeed as this is a single server local deployment I need to install both. If I only install one it will leave the other product broken. This however does not affect you if you are running Visual Studio and Team Foundation Server on separate computers as is normal in a production deployment. Main workhorse I will be installing the service pack first on my main computer as I want to actually use it here. Figure: My main workhorse I will also be installing this on my netbook which is obviously of significantly lower spec, but I will do that one after. Although, as always I had my fingers crossed, I was not really worried. Figure: KB2182621 Compared to Visual Studio there are not really a lot of components to update. Figure: TFS 2010 and SQL 2008 are the main things to update There is no “web” installer for the Team Foundation Server 2010 Service Pack, but that is ok as most people will be installing it on a production server and will want to have everything local. I would have liked a Web installer, but the added complexity for the product team is not work the capability for a 500mb patch. Figure: There is currently no way to roll SP1 and RTM together Figure: No problems with the file verification, phew Figure: Although the install took a while, it progressed smoothly   Figure: I always like a success screen Well, as far as the install is concerned everything is OK, but what about TFS? Can I still connect and can I still administer it. Figure: Service Pack 1 is reflected correctly in the Administration Console I am confident that there are no major problems with TFS on my system and that it has been updated to SP1. I can do all of the things that I used before with ease, and with the new features detailed by Brian I think I will be happy. Netbook The great god Murphy has stuck, and my poor wee laptop spat the Team Foundation Server 2010 Service Pack 1 out so fast it hit me on the back of the head. That will teach me for not looking… Figure: “Installation did not succeed” I am pretty sure should not be all caps! On examining the file I found that everything worked, except the actual Team Foundation Server 2010 serving step. Action: System Requirement Checks... Action complete Action: Downloading and/or Verifying Items c:\757fe6efe9f065130d4838081911\VS10-KB2182621.msp: Verifying signature for VS10-KB2182621.msp c:\757fe6efe9f065130d4838081911\VS10-KB2182621.msp Signature verified successfully for VS10-KB2182621.msp c:\757fe6efe9f065130d4838081911\DACFramework_enu.msi: Verifying signature for DACFramework_enu.msi c:\757fe6efe9f065130d4838081911\DACFramework_enu.msi Signature verified successfully for DACFramework_enu.msi c:\757fe6efe9f065130d4838081911\DACProjectSystemSetup_enu.msi: Verifying signature for DACProjectSystemSetup_enu.msi Exists: evaluating Exists evaluated to false c:\757fe6efe9f065130d4838081911\DACProjectSystemSetup_enu.msi Signature verified successfully for DACProjectSystemSetup_enu.msi c:\757fe6efe9f065130d4838081911\TSqlLanguageService_enu.msi: Verifying signature for TSqlLanguageService_enu.msi c:\757fe6efe9f065130d4838081911\TSqlLanguageService_enu.msi Signature verified successfully for TSqlLanguageService_enu.msi c:\757fe6efe9f065130d4838081911\SharedManagementObjects_x86_enu.msi: Verifying signature for SharedManagementObjects_x86_enu.msi c:\757fe6efe9f065130d4838081911\SharedManagementObjects_x86_enu.msi Signature verified successfully for SharedManagementObjects_x86_enu.msi c:\757fe6efe9f065130d4838081911\SharedManagementObjects_amd64_enu.msi: Verifying signature for SharedManagementObjects_amd64_enu.msi c:\757fe6efe9f065130d4838081911\SharedManagementObjects_amd64_enu.msi Signature verified successfully for SharedManagementObjects_amd64_enu.msi c:\757fe6efe9f065130d4838081911\SQLSysClrTypes_x86_enu.msi: Verifying signature for SQLSysClrTypes_x86_enu.msi c:\757fe6efe9f065130d4838081911\SQLSysClrTypes_x86_enu.msi Signature verified successfully for SQLSysClrTypes_x86_enu.msi c:\757fe6efe9f065130d4838081911\SQLSysClrTypes_amd64_enu.msi: Verifying signature for SQLSysClrTypes_amd64_enu.msi c:\757fe6efe9f065130d4838081911\SQLSysClrTypes_amd64_enu.msi Signature verified successfully for SQLSysClrTypes_amd64_enu.msi c:\757fe6efe9f065130d4838081911\vcruntime\Vc_runtime_x86.cab: Verifying signature for vcruntime\Vc_runtime_x86.cab c:\757fe6efe9f065130d4838081911\vcruntime\Vc_runtime_x86.cab Signature verified successfully for vcruntime\Vc_runtime_x86.cab c:\757fe6efe9f065130d4838081911\vcruntime\Vc_runtime_x86.msi: Verifying signature for vcruntime\Vc_runtime_x86.msi c:\757fe6efe9f065130d4838081911\vcruntime\Vc_runtime_x86.msi Signature verified successfully for vcruntime\Vc_runtime_x86.msi c:\757fe6efe9f065130d4838081911\SetupUtility.exe: Verifying signature for SetupUtility.exe c:\757fe6efe9f065130d4838081911\SetupUtility.exe Signature verified successfully for SetupUtility.exe c:\757fe6efe9f065130d4838081911\vcruntime\Vc_runtime_x64.cab: Verifying signature for vcruntime\Vc_runtime_x64.cab c:\757fe6efe9f065130d4838081911\vcruntime\Vc_runtime_x64.cab Signature verified successfully for vcruntime\Vc_runtime_x64.cab c:\757fe6efe9f065130d4838081911\vcruntime\Vc_runtime_x64.msi: Verifying signature for vcruntime\Vc_runtime_x64.msi c:\757fe6efe9f065130d4838081911\vcruntime\Vc_runtime_x64.msi Signature verified successfully for vcruntime\Vc_runtime_x64.msi c:\757fe6efe9f065130d4838081911\NDP40-KB2468871.exe: Verifying signature for NDP40-KB2468871.exe c:\757fe6efe9f065130d4838081911\NDP40-KB2468871.exe Signature verified successfully for NDP40-KB2468871.exe Action complete Action: Performing actions on all Items Entering Function: BaseMspInstallerT >::PerformAction Action: Performing Install on MSP: c:\757fe6efe9f065130d4838081911\VS10-KB2182621.msp targetting Product: Microsoft Team Foundation Server 2010 - ENU Returning IDOK. INSTALLMESSAGE_ERROR [Error 1935.An error occurred during the installation of assembly 'Microsoft.TeamFoundation.WebAccess.WorkItemTracking,version="10.0.0.0",publicKeyToken="b03f5f7f11d50a3a",processorArchitecture="MSIL",fileVersion="10.0.40219.1",culture="neutral"'. Please refer to Help and Support for more information. HRESULT: 0x80070005. ] Returning IDOK. INSTALLMESSAGE_ERROR [Error 1712.One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible.] Patch (c:\757fe6efe9f065130d4838081911\VS10-KB2182621.msp) Install failed on product (Microsoft Team Foundation Server 2010 - ENU). Msi Log: MSI returned 0x643 Entering Function: MspInstallerT >::Rollback Action Rollback changes PerformMsiOperation returned 0x643 PerformMsiOperation returned 0x643 OnFailureBehavior for this item is to Rollback. Action complete Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation. " (Elapsed time: 0 00:14:09). Figure: Error log for Team Foundation Server 2010 install shows a failure As there is really no information in this log as to why the installation failed so I checked the event log on that box. Figure: There are hundreds of errors and it actually looks like there are more problems than a failed Service Pack I am going to just run it again and see if it was because the netbook was slow to catch on to the update. Hears hoping, but even if it fails, I would question the installation of Windows (PDC laptop original install) before I question the Service Pack Figure: Second run through was successful I don’t know if the laptop was just slow, or what… Did you get this error? If you did I will push this to the product team as a problem, but unless more people have this sort of error, I will just look to write this off as a corrupted install of Windows and reinstall.

  Read the article

• Resolving IIS7 HTTP Error 500.19 - Internal Server Error

  - by fatherjack

  LiveJournal Tags: RedGate Tools,SQL Server,Tips and Tricks How To The requested page cannot be accessed because the related configuration data for the page is invalid. As part of my work recently I was moving SQL Monitor from the bespoke XSP web server to be hosted on IIS instead. This didn't go smoothly. I was lucky to be helped by Red Gate's support team (http://twitter.com/kickasssupport). I had SQL Monitor installed and working fine on the XSP site but wanted to move to IIS so I reinstalled the software and chose the IIS option. This wasn't possible as IIS wasn't installed on the server. I went to Control Panel, Windows features and installed IIS and then returned to the SQL Monitor installer. Everything went as planned but when I browsed the site I got a huge error with the message "HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid." All links that I could find suggested it was a permissions issue, based on the directory where the config file was stored. I changed this any number of times and also tried the altering its location. Nothing resolved the error. It was only when I was trying the installation again that I read through the details from Red Gate and noted that they referred to ASP settings that I didn't have. Essentially I was seeing this. I had installed IIS using the default settings and that DOESN'T include ASP. When this dawned on me I went back through the windows components installation process and ticked the ASP service within the IIS role. Completing this and going back to the IIS management console I saw something like this; so many more options! When I clicked on the Authentication icon this time I got the option to not only enable Anonymous Authentication but also ASP.NET Impersonation (which is disabled by default). Once I had enabled this the SQL Monitor website worked without error. I think the HTTP Error 500.19 is misleading in this case and at the very least should be able to recognise if the ASP service is installed or not and then to include a hint that it should be. I hope this helps some people and avoids wasting as much of your time as it did mine. Let me know if it helps you.

  Read the article

• Speed up SQL Server queries with PREFETCH

  - by Akshay Deep Lamba

  Problem The SAN data volume has a throughput capacity of 400MB/sec; however my query is still running slow and it is waiting on I/O (PAGEIOLATCH_SH). Windows Performance Monitor shows data volume speed of 4MB/sec. Where is the problem and how can I find the problem? Solution This is another summary of a great article published by R. Meyyappan at www.sqlworkshops.com.  In my opinion, this is the first article that highlights and explains with working examples how PREFETCH determines the performance of a Nested Loop join.  First of all, I just want to recall that Prefetch is a mechanism with which SQL Server can fire up many I/O requests in parallel for a Nested Loop join. When SQL Server executes a Nested Loop join, it may or may not enable Prefetch accordingly to the number of rows in the outer table. If the number of rows in the outer table is greater than 25 then SQL will enable and use Prefetch to speed up query performance, but it will not if it is less than 25 rows. In this section we are going to see different scenarios where prefetch is automatically enabled or disabled. These examples only use two tables RegionalOrder and Orders.  If you want to create the sample tables and sample data, please visit this site www.sqlworkshops.com. The breakdown of the data in the RegionalOrders table is shown below and the Orders table contains about 6 million rows. In this first example, I am creating a stored procedure against two tables and then execute the stored procedure.  Before running the stored proceudre, I am going to include the actual execution plan. --Example provided by www.sqlworkshops.com --Create procedure that pulls orders based on City --Do not forget to include the actual execution plan CREATE PROC RegionalOrdersProc @City CHAR(20) AS BEGIN DECLARE @OrderID INT, @OrderDetails CHAR(200) SELECT @OrderID = o.OrderID, @OrderDetails = o.OrderDetails       FROM RegionalOrders ao INNER JOIN Orders o ON (o.OrderID = ao.OrderID)       WHERE City = @City END GO SET STATISTICS time ON GO --Example provided by www.sqlworkshops.com --Execute the procedure with parameter SmallCity1 EXEC RegionalOrdersProc 'SmallCity1' GO After running the stored procedure, if we right click on the Clustered Index Scan and click Properties we can see the Estimated Numbers of Rows is 24.    If we right click on Nested Loops and click Properties we do not see Prefetch, because it is disabled. This behavior was expected, because the number of rows containing the value ‘SmallCity1’ in the outer table is less than 25.   Now, if I run the same procedure with parameter ‘BigCity’ will Prefetch be enabled? --Example provided by www.sqlworkshops.com --Execute the procedure with parameter BigCity --We are using cached plan EXEC RegionalOrdersProc 'BigCity' GO As we can see from the below screenshot, prefetch is not enabled and the query takes around 7 seconds to execute. This is because the query used the cached plan from ‘SmallCity1’ that had prefetch disabled. Please note that even if we have 999 rows for ‘BigCity’ the Estimated Numbers of Rows is still 24.   Finally, let’s clear the procedure cache to trigger a new optimization and execute the procedure again. DBCC freeproccache GO EXEC RegionalOrdersProc 'BigCity' GO This time, our procedure runs under a second, Prefetch is enabled and the Estimated Number of Rows is 999.   The RegionalOrdersProc can be optimized by using the below example where we are using an optimizer hint. I have also shown some other hints that could be used as well. --Example provided by www.sqlworkshops.com --You can fix the issue by using any of the following --hints --Create procedure that pulls orders based on City DROP PROC RegionalOrdersProc GO CREATE PROC RegionalOrdersProc @City CHAR(20) AS BEGIN DECLARE @OrderID INT, @OrderDetails CHAR(200) SELECT @OrderID = o.OrderID, @OrderDetails = o.OrderDetails       FROM RegionalOrders ao INNER JOIN Orders o ON (o.OrderID = ao.OrderID)       WHERE City = @City       --Hinting optimizer to use SmallCity2 for estimation       OPTION (optimize FOR (@City = 'SmallCity2'))       --Hinting optimizer to estimate for the currnet parameters       --option (recompile)       --Hinting optimize not to use histogram rather       --density for estimation (average of all 3 cities)       --option (optimize for (@City UNKNOWN))       --option (optimize for UNKNOWN) END GO Conclusion, this tip was mainly aimed at illustrating how Prefetch can speed up query execution and how the different number of rows can trigger this.

  Read the article

• Customize Entity Framework SSDL &amp; SQL Generation

  - by Dane Morgridge

  In almost every talk I have done on Entity Framework I get questions on how to do custom SSDL or SQL when using model first development.  Quite a few of these questions have required custom changes to the SSDL, which of course can be a problem if it is getting auto generated.  Luckily, there is a tool that can help.  In the Visual Studio Gallery on MSDN, there is the Entity Designer Database Generation Power Pack. You have the ability to select different generation strategies and it also allows you to inject custom T4 Templates into the generation workflow so that you can customize the SSDL and SQL generation.  When you select to generate a database from a model the dialog is replaced by one with more options:   You can clone the individual workflow for either the current project or current machine.  The templates are installed at “C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\Extensions\Microsoft\Entity Framework Tools\DBGen” on my local machine and you can make a copy of any template there.  If you clone the strategy and open it up, you will get the following workflow: Each item in the sequence is defining the execution of a T4 template.  The XAML for the workflow is listed below so you can see where the T4 files are defined.  You can simply make a copy of an existing template and make what ever changes you need.   1: <Activity x:Class="GenerateDatabaseScriptWorkflow" ... > 2: <x:Members> 3: <x:Property Name="Csdl" Type="InArgument(sde:EdmItemCollection)" /> 4: <x:Property Name="ExistingSsdl" Type="InArgument(s:String)" /> 5: <x:Property Name="ExistingMsl" Type="InArgument(s:String)" /> 6: <x:Property Name="Ssdl" Type="OutArgument(s:String)" /> 7: <x:Property Name="Msl" Type="OutArgument(s:String)" /> 8: <x:Property Name="Ddl" Type="OutArgument(s:String)" /> 9: <x:Property Name="SmoSsdl" Type="OutArgument(ss:SsdlServer)" /> 10: </x:Members> 11: <Sequence> 12: <dbtk:ProgressBarStartActivity /> 13: <dbtk:CsdlToSsdlTemplateActivity SsdlOutput="[Ssdl]" TemplatePath="$(VSEFTools)\DBGen\CSDLToSSDL_TPT.tt" /> 14: <dbtk:CsdlToMslTemplateActivity MslOutput="[Msl]" TemplatePath="$(VSEFTools)\DBGen\CSDLToMSL_TPT.tt" /> 15: <ded:SsdlToDdlActivity ExistingSsdlInput="[ExistingSsdl]" SsdlInput="[Ssdl]" DdlOutput="[Ddl]" /> 16: <dbtk:GenerateAlterSqlActivity DdlInputOutput="[Ddl]" DeployToScript="True" DeployToDatabase="False" /> 17: <dbtk:ProgressBarEndActivity ClosePopup="true" /> 18: </Sequence> 19: </Activity>   So as you can see, this tool enables you to make some pretty heavy customizations to how the SSDL and SQL get generated.  You can get more info and the tool can be downloaded from: http://visualstudiogallery.msdn.microsoft.com/en-us/df3541c3-d833-4b65-b942-989e7ec74c87.  There is a comments section on the site so make sure you let the team know what you like and what you don’t like.  Enjoy!

  Read the article

• SQL Saturday and Exploring Data Privacy

  - by Johnm

  I have been highly impressed with the growth of the SQL Saturday phenomenon. It seems that an announcement for a new wonderful event finds its way to my inbox on a daily basis. I have had the opportunity to attend the first of the SQL Saturday's for Tampa, Chicago, Louisville and recently my home town of Indianapolis. It is my hope that there will be many more in my future. This past weekend I had the honor of being selected to speak amid a great line up of speakers at SQL Saturday #82 in Indianapolis. My session topic/title was "Exploring Data Privacy". Below is a brief synopsis of my session: Data Privacy in a Nutshell        - Definition of data privacy        - Examples of personally identifiable data        - Examples of Sensitive data Laws and Stuff        - Various examples of laws, regulations and policies that influence the definition of data privacy        - General rules of thumb that encompasses most laws Your Data Footprint        - Who has personal information about you?        - What are you exchanging data privacy for?        - The amazing resilience of data        - The cost of data loss Weapons of Mass Protection       - Data classification       - Extended properties       - Database Object Schemas       - An extraordinarily brief introduction of encryption       - The amazing data professional  <-the most important point of the entire session! The subject of data privacy is one that is quickly making its way to the forefront of the mind of many data professionals. Somewhere out there someone is storing personally identifiable and other sensitive data about you. In some cases it is kept reasonably secure. In other cases it is kept in total exposure without the consideration of its potential of damage to you. Who has access to it and how is it being used? Are we being unnecessarily required to supply sensitive data in exchange for products and services? These are just a few questions on everyone's mind. As data loss events of grand scale hit the headlines in a more frequent succession, the level of frustration and urgency for a solution increases. I assembled this session with the intent to raise awareness of sensitive data and remind us all that we, data professionals, are the ones who have the greatest impact and influence on how sensitive data is regarded and protected. Mahatma Gandhi once said "Be the change you want to see in the world." This is guidance that I keep near to my heart as I approached this topic of data privacy.

  Read the article

• Perform Routine Server Checks Using PowerShell

  Database administrators tend to perform a lot of routine checks, referred to as sanity checks, on a daily, weekly, and monthly basis. Rob Gravelle shows you how to write some PowerShell scripts to automate a couple of fairly common sanity checks. New! SQL Monitor 3.0 Red Gate's multi-server performance monitoring and alerting tool gets results from Day One.Simple to install and easy to use – download a free trial today.

  Read the article

• Using SQL Source Control with Fortress or Vault &ndash; Part 2

  - by AjarnMark

  In Part 1, I started talking about using Red-Gate’s newest version of SQL Source Control and how I really like it as a viable method to source control your database development.  It looks like this is going to turn into a little series where I will explain how we have done things in the past, and how life is different with SQL Source Control.  I will also explain some of my philosophy and methodology around deployment with these tools.  But for now, let’s talk about some of the good and the bad of the tool itself. More Kudos and Features I mentioned previously how impressed I was with the responsiveness of Red-Gate’s team.  I have been having an ongoing email conversation with Gyorgy Pocsi, and as I have run into problems or requested things behave a little differently, it has not been more than a day or two before a new Build is ready for me to download and test.  Quite impressive! I’m sure much of the requests I put in were already in the plans, so I can’t really take credit for them, but throughout this conversation, Red-Gate has implemented several features that were not in the first Early Access version.  Those include: Honoring the Fortress configuration option to require Work Item (Bug) IDs on check-ins. Adding the check-in comment text as a comment to the Work Item. Adding the list of checked-in files, along with the Fortress links for automatic History and DIFF view Updating the status of a Work Item on check-in (e.g. setting the item to Complete or, in our case “Dev-Complete”) Support for the Fortress 2.0 API, and not just the Vault Pro 5.1 API.  (See later notes regarding support for Fortress 2.0). These were all features that I felt we really needed to have in-place before I could honestly consider converting my team to using SQL Source Control on a regular basis.  Now that I have those, my only excuse is not wanting to switch boats on the team mid-stream.  So when we wrap up our current release in a few weeks, we will make the jump.  In the meantime, I will continue to bang on it to make sure it is stable.  It passed one test for stability when I did a test load of one of our larger database schemas into Fortress with SQL Source Control.  That database has about 150 tables, 200 User-Defined Functions and nearly 900 Stored Procedures.  The initial load to source control went smoothly and took just a brief amount of time. Warnings Remember that this IS still in pre-release stage and while I have not had any problems after that first hiccup I wrote about last time, you still need to treat it with a healthy respect.  As I understand it, the RTM is targeted for February.  There are a couple more features that I hope make it into the final release version, but if not, they’ll probably be coming soon thereafter.  Those are: A Browse feature to let me lookup the Work Item ID instead of having to remember it or look back in my Item details.  This is just a matter of convenience. I normally have my Work Item list open anyway, so I can easily look it up, but hey, why not make it even easier. A multi-line comment area.  The current space for writing check-in comments is a single-line text box.  I would like to have a multi-line space as I sometimes write lengthy commentary.  But I recognize that it is a struggle to get most developers to put in more than the word “fixed” as their comment, so this meets the need of the majority as-is, and it’s not a show-stopper for us. Merge.  SQL Source Control currently does not have a Merge feature.  If two or more people make changes to the same database object, you will get a warning of the conflict and have to choose which one wins (and then manually edit to include the others’ changes).  I think it unlikely you will run into actual conflicts in Stored Procedures and Functions, but you might with Views or Tables.  This will be nice to have, but I’m not losing any sleep over it.  And I have multiple tools at my disposal to do merges manually, so really not a show-stopper for us. Automation has its limits.  As cool as this automation is, it has its limits and there are some changes that you will be better off scripting yourself.  For example, if you are refactoring table definitions, and want to change a column name, you can write that as a quick sp_rename command and preserve the data within that column.  But because this tool is looking just at a before and after picture, it cannot tell that you just renamed a column.  To the tool, it looks like you dropped one column and added another.  This is not a knock against Red-Gate.  All automated scripting tools have this issue, unless the are actively monitoring your every step to know exactly what you are doing.  This means that when you go to Deploy your changes, SQL Compare will script the change as a column drop and add, or will attempt to rebuild the entire table.  Unfortunately, neither of these approaches will preserve the existing data in that column the way an sp_rename will, and so you are better off scripting that change yourself.  Thankfully, SQL Compare will produce warnings about the potential loss of data before it does the actual synchronization and give you a chance to intercept the script and do it yourself. Also, please note that the current official word is that SQL Source Control supports Vault Professional 5.1 and later.  Vault Professional is the new name for what was previously known as Fortress.  (You can read about the name change on SourceGear’s site.)  The last version of Fortress was 2.x, and the API for Fortress 2.x is different from the API for Vault Pro.  At my company, we are currently running Fortress 2.0, with plans to upgrade to Vault Pro early next year.  Gyorgy was able to come up with a work-around for me to be able to use SQL Source Control with Fortress 2.0, even though it is not officially supported.  If you are using Fortress 2.0 and want to use SQL Source Control, be aware that this is not officially supported, but it is working for us, and you can probably get the work-around instructions from Red-Gate if you’re really, really nice to them. Upcoming Topics Some of the other topics I will likely cover in this series over the next few weeks are: How we used to do source control back in the old days (a few weeks ago) before SQL Source Control was available to Vault users What happens when you restore a database that is linked to source control Handling multiple development branches of source code Concurrent Development practices and handling Conflicts Deployment Tips and Best Practices A recap after using the tool for a while

  Read the article

• BIP BIServer Query Debug

  - by Tim Dexter

  With some help from Bryan, I have uncovered a way of being able to debug or at least log what BIServer is doing when BIP sends it a query request. This is not for those of you querying the database directly but if you are using the BIServer and its datamodel to fetch data for a BIP report. If you have written or used the query builder against BIServer and when you run the report it chokes with a cryptic message, that you have no clue about, read on. When BIP runs a piece of BIServer logical SQL to fetch data. It does not appear to validate it, it just passes it through, so what is BIServer doing on its end? As you may know, you are not writing regular physical sql its actually logical sql e.g. select Jobs."Job Title" as "Job Title", Employees."Last Name" as "Last Name", Employees.Salary as Salary, Locations."Department Name" as "Department Name", Locations."Country Name" as "Country Name", Locations."Region Name" as "Region Name" from HR.Locations Locations, HR.Employees Employees, HR.Jobs Jobs The tables might not even be a physical tables, we don't care, that's what the BIServer and its model are for. You have put all the effort into building the model, just go get me the data from where ever it might be. The BIServer takes the logical sql and uses its vast brain to work out what the physical SQL is, executes it and passes the result back to BIP. select distinct T32556.JOB_TITLE as c1, T32543.LAST_NAME as c2, T32543.SALARY as c3, T32537.DEPARTMENT_NAME as c4, T32532.COUNTRY_NAME as c5, T32577.REGION_NAME as c6 from JOBS T32556, REGIONS T32577, COUNTRIES T32532, LOCATIONS T32569, DEPARTMENTS T32537, EMPLOYEES T32543 where ( T32532.COUNTRY_ID = T32569.COUNTRY_ID and T32532.REGION_ID = T32577.REGION_ID and T32537.DEPARTMENT_ID = T32543.DEPARTMENT_ID and T32537.LOCATION_ID = T32569.LOCATION_ID and T32543.JOB_ID = T32556.JOB_ID ) Not a very tough example I know but you get the idea. How do I know what the BIServer is up to? How can I find out what the issue might be if BIServer chokes on my query? There are a couple of steps: In the Administrator tool you need to set the logging level for the Administrator user to something greater than the default '0'. '7' is going to give you the max. Just remember to take it back down after you have finished the debug. I needed to bounce my BIServer service Now here's the secret sauce. Prefix the following to your BIP query set variable LOGLEVEL = 7; Set the log level to that you have in the admin tool Now run your BIP report. With the prefix in place; BIServer will write to the NQQuery.log file. This is located in the ./OracleBI/server/Log directory. In there you are going to find the complete process the BIServer has gone through to try and get the data back for you A quick note, if the BIServer can, its going to hit that great BIEE cache to get your data and you may not see the full log. IF this is the case. Get inot hte Administration page (via the browser login) and clear out your BIP report cursor. Then re-run. This will hopefully help out if you are trying to debug that annoying BIP report that will not run or is getting some strange data. Don't forget to turn that logging level back down once you are done. This will avoid the DBA screaming at you for sucking up all the disk space on the system.

  Read the article

< Previous Page | 617 618 619 620 621 622 623 624 625 626 627 628  | Next Page >