Search Results

Search found 16801 results on 673 pages for 'task manager'.

Page 621/673 | < Previous Page | 617 618 619 620 621 622 623 624 625 626 627 628  | Next Page >

• How Estimates Became Quotes

  - by Lee Brandt

  It’s our fault. Well, not completely, but we haven’t helped the situation any. All of what follows comes from my own experiences which, from talking to lots of other developers about it, seems to be pretty much par for the course. Where We Started When we first started estimating, we estimated pretty clearly. We would try to imagine something we’d done that was similar to the project being estimated and we’d toss it about in our heads a bit and see how much bigger or smaller we thought this new thing was, and add or subtract accordingly. We wouldn’t spend too much time on it, because we wanted to get to writing the software. Eventually, we’d come across some huge problem that there was now way we could’ve known about ahead of time. Either we didn’t see this thing or, we didn’t realize that this particular version of a problem would be so… problematic. We usually call this “not knowing what we don’t know”. It’s unavoidable. We just can’t know. Until we wade in and start putting some code together, there are just some things we won’t know… and some things we don’t even know that we don’t know. Y’know? So what happens? We go over budget. Project managers scream and dance the dance of the stressed-out project manager, and there is nothing we can do (or could’ve done) about it. We didn’t know. We thought about it for a bit and we didn’t see this herculean task sitting in the middle of our nice quiet project, and it has bitten us in the rear end. We now know how to handle this in the future, though. We will take some more time to pick around the requirements and discover all those things we don’t know. We’ll do some prototyping, we’ll read some blogs about similar projects, we’ll really grill the customer with questions during the requirements gathering phase. We’ll keeping asking “what else?” until the shove us down the stairs. We’ll take our time and uncover it all. We Learned, But Good The next time comes, and you know what happens? We do it. We grill the customer for weeks and prototype and read and research and we estimate everything down to the last button on the last form. Know what that gets us? It gets us three months of wasted time, and our estimate will still be off. Possibly off by a factor of four. WTF, mate? No way we could be surprised by something! We uncovered every particle. We turned every stone. How is it we still came across unknowns? Because we STILL didn’t know what we didn’t know. How could we? We didn’t know to ask. The worst part is, we’ve now convinced the product that this is NOT an estimate. It is a solid number based on massive research and an endless number of questions that they answered. There is absolutely now way you don’t know everything there is to know about this project now. No way there is anything you haven’t uncovered. And their faith in that “Esti-Quote” goes through the roof. When the project goes over this time, they might even begin to question whether or not you know what you’re doing. Who could blame them? You drilled them for weeks about every little thing, and when they complained about all the questions, you told them you wanted to uncover everything so there would be no surprises. SO we set them up to faile Guess, Then Plan We had a chance. At the beginning we could have just said, “That’s just a gut-feeling estimate, based on my past experience with similar projects. There could still be surprises.” If we spend SOME time doing SOME discovery and then bounce that against our own past experiences, we can come up with a fairly healthy estimate. We can then help the product owner understand that an estimate is a guess. Sure, it’s an educated guess, but it is still a guess. If we get it right it will be almost completely luck. Then, we help them to plan the development by taking that guess (yes, they still need the guess for planning purposes) and start measuring early and often to see if we still think we are right. We should adjust the estimate and alert the product owner as soon as we see problems (bad news does not age well) and we should be able to see any problems immediately if we are constantly measuring our pace. In lean software, we start with that guess and begin measuring cycle times immediately. Then we can make projections based on those cycle times and compare them to our estimate. This constant feedback is the best way to ensure that there are no surprises at the END of the project. There sill still be surprises, but we’ll see them sooner and have a better understanding of how they will affect our overall timeline. What do you think?

  Read the article

• Implement Tree/Details With Taskflow Regions Using EJB

  - by Deepak Siddappa

  This article describes on Display Tree/Details using taskflow regions.Use Case DescriptionLet us take scenario where we need to display Tree/Details, left region contains category hierarchy with items listed in a tree structure (ex:- Region-Countries-Locations-Departments in tree format) and right region contains the Employees list.In detail, Here User may drills down through categories using a tree until Employees are listed. Clicking the tree node name displays Employee list in the adjacent pane related to particular tree node. Implementation StepsThe script for creating the tables and inserting the data required for this application CreateSchema.sql Lets create a Java EE Web Application with Entities based on Regions, Countries, Locations, Departments and Employees table. Create a Stateless Session Bean and data control for the Stateless Session Bean. Add the below code to the session bean and expose the method in local/remote interface and generate a data control for that.Note:- Here in the below code "em" is a EntityManager. public List<Employees> empFilteredByTreeNode(String treeNodeType, String paramValue) { String queryString = null; try { if (treeNodeType == "null") { queryString = "select * from Employees emp ORDER BY emp.employee_id ASC"; } else if (Pattern.matches("[a-zA-Z]+[_]+[a-zA-Z]+[_]+[[0-9]+]+", treeNodeType)) { queryString = "select * from employees emp INNER JOIN departments dept\n" + "ON emp.department_id = dept.department_id JOIN locations loc\n" + "ON dept.location_id = loc.location_id JOIN countries cont\n" + "ON loc.country_id = cont.country_id JOIN regions reg\n" + "ON cont.region_id = reg.region_id and reg.region_name = '" + paramValue + "' ORDER BY emp.employee_id ASC"; } else if (treeNodeType.contains("regionsFindAll_bc_countriesList_1")) { queryString = "select * from employees emp INNER JOIN departments dept \n" + "ON emp.department_id = dept.department_id JOIN locations loc \n" + "ON dept.location_id = loc.location_id JOIN countries cont \n" + "ON loc.country_id = cont.country_id and cont.country_name = '" + paramValue + "' ORDER BY emp.employee_id ASC"; } else if (treeNodeType.contains("regionsFindAll_bc_locationsList_1")) { queryString = "select * from employees emp INNER JOIN departments dept ON emp.department_id = dept.department_id JOIN locations loc ON dept.location_id = loc.location_id and loc.city = '" + paramValue + "' ORDER BY emp.employee_id ASC"; } else if (treeNodeType.trim().contains("regionsFindAll_bc_departmentsList_1")) { queryString = "select * from Employees emp INNER JOIN Departments dept ON emp.DEPARTMENT_ID = dept.DEPARTMENT_ID and dept.DEPARTMENT_NAME = '" + paramValue + "'"; } } catch (NullPointerException e) { System.out.println(e.getMessage()); } return em.createNativeQuery(queryString, Employees.class).getResultList(); } In the ViewController project, create two ADF taskflow with page Fragments and name them as FirstTaskflow and SecondTaskflow respectively. Open FirstTaskflow,from component palette drop view(Page Fragment) name it as TreeList.jsff. Open SeconfTaskflow, from component palette drop view(Page Fragment) name it as EmpList.jsff and create two paramters in its overview parameters tab as shown in below image. Open TreeList.jsff , from data control palette drop regionsFindAll->Tree as ADF Tree. In Edit Tree Binding dialog, for Tree Level Rules select the display attributes as follows:-model.Regions - regionNamemodel.Countries - countryNamemodel.Locations - citymodel.Departments - departmentName In structure panel, click on af:Tree - t1 and select selectionListener with edit property. Create a "TreeBean" managed bean with scope as "session" as shown in below Image. Create new method as getTreeNodeSelectedValue and click ok. Open TreeBean managed bean and add the below code: private String treeNodeType; private String paramValue; public void getTreeNodeSelectedValue(SelectionEvent selectionEvent) { RichTree tree = (RichTree)selectionEvent.getSource(); RowKeySet addedSet = selectionEvent.getAddedSet(); Iterator i = addedSet.iterator(); TreeModel model = (TreeModel)tree.getValue(); model.setRowKey(i.next()); JUCtrlHierNodeBinding node = (JUCtrlHierNodeBinding)tree.getRowData(); //oracle.jbo.Row Row rw = node.getRow(); Object selectedTreeNode = node.getAttribute(0); Object treeListType = node.getBindings(); String treeNodeType = treeListType.toString(); this.setParamValue(selectedTreeNode.toString()); this.setTreeNodeType(treeNodeType); } public void setTreeNodeType(String treeNodeType) { this.treeNodeType = treeNodeType; } public String getTreeNodeType() { return treeNodeType; } public void setParamValue(String paramValue) { this.paramValue = paramValue; } public String getParamValue() { return paramValue; }<br /> Open EmpList.jsff , from data control palette drop empFilteredByTreeNode->Employees->Table as ADF Read-only Table. After selecting the  Employees result set, in Edit Action Binding dialog window pass the pageFlowScope parameters as shown in below Image. In empList.jsff page, click Binding tab and click on Create Executable binding and select Invoke action and follow as shown in below image. Edit executeEmpFiltered invoke action properties and set the Refresh to ifNeeded, So when ever the page needs the method will be executed. Create Main.jspx page with page template as Oracle Three Column Layout. Drop FirstTaskflow as Region in start facet and drop SecondTaskflow as Region in center facet, Edit task Flow Binding dialog window pass the Input Paramters as shown in below Image. Run the Main.jspx, tree will be displayed in left region and emp details will displyaed on the right region. Click on the Americas in tree node, all emp related to the Americas related will be displayed. Click on Americas->United States of America->South San Francisco->Accounting, only employee belongs to the Accounting department will be displayed.

  Read the article

• Mapping Repeating Sequence Groups in BizTalk

  - by Paul Petrov

  Repeating sequence groups can often be seen in real life XML documents. It happens when certain sequence of elements repeats in the instance document. Here’s fairly abstract example of schema definition that contains sequence group: <xs:schemaxmlns:b="http://schemas.microsoft.com/BizTalk/2003"            xmlns:xs="http://www.w3.org/2001/XMLSchema"            xmlns="NS-Schema1"            targetNamespace="NS-Schema1" >  <xs:elementname="RepeatingSequenceGroups">     <xs:complexType>       <xs:sequencemaxOccurs="1"minOccurs="0">         <xs:sequencemaxOccurs="unbounded">           <xs:elementname="A"type="xs:string" />           <xs:elementname="B"type="xs:string" />           <xs:elementname="C"type="xs:string"minOccurs="0" />         </xs:sequence>       </xs:sequence>     </xs:complexType>  </xs:element> </xs:schema> And here’s corresponding XML instance document: <ns0:RepeatingSequenceGroupsxmlns:ns0="NS-Schema1">  <A>A1</A>  <B>B1</B>  <C>C1</C>  <A>A2</A>  <B>B2</B>  <A>A3</A>  <B>B3</B>  <C>C3</C> </ns0:RepeatingSequenceGroups> As you can see elements A, B, and C are children of anonymous xs:sequence element which in turn can be repeated N times. Let’s say we need do simple mapping to the schema with similar structure but with different element names: <ns0:Destinationxmlns:ns0="NS-Schema2">  <Alpha>A1</Alpha>  <Beta>B1</Beta>  <Gamma>C1</Gamma>  <Alpha>A2</Alpha>  <Beta>B2</Beta>  <Gamma>C2</Gamma> </ns0:Destination> The basic map for such typical task would look pretty straightforward: If we test this map without any modification it will produce following result: <ns0:Destinationxmlns:ns0="NS-Schema2">  <Alpha>A1</Alpha>  <Alpha>A2</Alpha>  <Alpha>A3</Alpha>  <Beta>B1</Beta>  <Beta>B2</Beta>  <Beta>B3</Beta>  <Gamma>C1</Gamma>  <Gamma>C3</Gamma> </ns0:Destination> The original order of the elements inside sequence is lost and that’s not what we want. Default behavior of the BizTalk 2009 and 2010 Map Editor is to generate compatible map with older versions that did not have ability to preserve sequence order. To enable this feature simply open map file (*.btm) in text/xml editor and find attribute PreserveSequenceOrder of the root <mapsource> element. Set its value to Yes and re-test the map: <ns0:Destinationxmlns:ns0="NS-Schema2">  <Alpha>A1</Alpha>  <Beta>B1</Beta>  <Gamma>C1</Gamma>  <Alpha>A2</Alpha>  <Beta>B2</Beta>  <Alpha>A3</Alpha>  <Beta>B3</Beta>  <Gamma>C3</Gamma> </ns0:Destination> The result is as expected – all corresponding elements are in the same order as in the source document. Under the hood it is achieved by using one common xsl:for-each statement that pulls all elements in original order (rather than using individual for-each statement per element name in default mode) and xsl:if statements to test current element in the loop:  <xsl:templatematch="/s0:RepeatingSequenceGroups">     <ns0:Destination>       <xsl:for-eachselect="A|B|C">         <xsl:iftest="local-name()='A'">           <Alpha>             <xsl:value-ofselect="./text()" />           </Alpha>         </xsl:if>         <xsl:iftest="local-name()='B'">           <Beta>             <xsl:value-ofselect="./text()" />           </Beta>         </xsl:if>         <xsl:iftest="local-name()='C'">           <Gamma>             <xsl:value-ofselect="./text()" />           </Gamma>         </xsl:if>       </xsl:for-each>     </ns0:Destination>  </xsl:template> BizTalk Map editor became smarter so learn and use this lesser known feature of XSLT 2.0 in your maps and XSL stylesheets.

  Read the article

• SQL ADO.NET shortcut extensions (old school!)

  - by Jeff

  As much as I love me some ORM's (I've used LINQ to SQL quite a bit, and for the MSDN/TechNet Profile and Forums we're using NHibernate more and more), there are times when it's appropriate, and in some ways more simple, to just throw up so old school ADO.NET connections, commands, readers and such. It still feels like a pain though to new up all the stuff, make sure it's closed, blah blah blah. It's pretty much the least favorite task of writing data access code. To minimize the pain, I have a set of extension methods that I like to use that drastically reduce the code you have to write. Here they are... public static void Using(this SqlConnection connection, Action<SqlConnection> action) {     connection.Open();     action(connection);     connection.Close(); } public static SqlCommand Command(this SqlConnection connection, string sql){    var command = new SqlCommand(sql, connection);    return command;}public static SqlCommand AddParameter(this SqlCommand command, string parameterName, object value){    command.Parameters.AddWithValue(parameterName, value);    return command;}public static object ExecuteAndReturnIdentity(this SqlCommand command){    if (command.Connection == null)        throw new Exception("SqlCommand has no connection.");    command.ExecuteNonQuery();    command.Parameters.Clear();    command.CommandText = "SELECT @@IDENTITY";    var result = command.ExecuteScalar();    return result;}public static SqlDataReader ReadOne(this SqlDataReader reader, Action<SqlDataReader> action){    if (reader.Read())        action(reader);    reader.Close();    return reader;}public static SqlDataReader ReadAll(this SqlDataReader reader, Action<SqlDataReader> action){    while (reader.Read())        action(reader);    reader.Close();    return reader;} It has been awhile since I've really revisited these, so you will likely find opportunity for further optimization. The bottom line here is that you can chain together a bunch of these methods to make a much more concise database call, in terms of the code on your screen, anyway. Here are some examples: public Dictionary<string, string> Get(){    var dictionary = new Dictionary<string, string>();    _sqlHelper.GetConnection().Using(connection =>        connection.Command("SELECT Setting, [Value] FROM Settings")            .ExecuteReader()            .ReadAll(r => dictionary.Add(r.GetString(0), r.GetString(1))));    return dictionary;} or... public void ChangeName(User user, string newName){    _sqlHelper.GetConnection().Using(connection =>         connection.Command("UPDATE Users SET Name = @Name WHERE UserID = @UserID")            .AddParameter("@Name", newName)            .AddParameter("@UserID", user.UserID)            .ExecuteNonQuery());} The _sqlHelper.GetConnection() is just some other code that gets a connection object for you. You might have an even cleaner way to take that step out entirely. This looks more fluent, and the real magic sauce for me is the reader bits where you can put any kind of arbitrary method in there to iterate over the results.

  Read the article

• SSIS Reporting Pack v0.4 – Execution Report updated

  - by jamiet

  SSIS Reporting Pack is a suite of reports that I maintain at http://ssisreportingpack.codeplex.com/ that provide visualisation over the SSIS Catalog in SQL Server 2012 and attempt to add value over the reports that ship in the box. Work on the reports has stalled (my last SSIS Reporting Pack blog post was on 4th September 2011) as I’ve had rather more important things going on my life of late however I have recently checked-in a fix that couldn’t really be delayed. I discovered a problem with the Execution report that was causing the report to effectively hang, it was caused by this bit of SQL hidden away in the report definition: [generated_executables] AS (   SELECT  [new_executable].[execution_path],[new_executable].[parent_execution_path]   FROM    (           SELECT  [execution_path] = SUBSTRING([loop_iteration].[execution_path] ,1, [loop_iteration].length_exec_path - [loop_iteration].[char_index_close_square] + 1)           ,       [parent_execution_path] = SUBSTRING([loop_iteration].[execution_path] ,1, [loop_iteration].length_exec_path - [loop_iteration].[char_index_open_square])           FROM    (                   SELECT  [execution_path]                   ,       [char_index_open_square] = CHARINDEX('[',REVERSE([execution_path]),1)                   ,       [char_index_close_square] = CHARINDEX(']',REVERSE([execution_path]),1)                   ,       [length_exec_path] = LEN([execution_path])                   FROM    [exec_stats] es                   WHERE   execution_path LIKE '%\[%]%'  ESCAPE '\'                   )AS [loop_iteration]           ) AS [new_executable]   GROUP   BY [new_executable].[execution_path],[new_executable].[parent_execution_path]) It was there because SSIS does not currently treat a loop iteration as an executable yet I figured there was still value in being able to view it as such – this SQL essentially “invents” new executables for those loop iterations; its what enabled the following visualisation: where each of the three iterations of a For Each Loop called “FEL Loop over top performing regions” appear in the report. Unfortunately, as I alluded, this could under certain circumstances (most likely when there were many loop iterations) cause the report to hang as it waited for the results to be constructed and returned. The change that I have made eradicates this generation of “fake” executables and thus produces this visualisation instead: Notice that the three “children” of the For Each Loop are no longer the three iterations but actually the task (“EPT Call Data Export Package”) contained within that For Each Loop. The problem here is of course that there is no longer a visual distinction between those three iterations; I have instead made the full execution path viewable via a tooltip:   If you preferred the “old” way of presenting this information and are happy to put up with the performance degradation then I have kept the old version of the report hanging around in the reporting pack as “execution loop with iterations” however none of the other reports link to it so you will have to browse to it manually if you want to use it. Please let me know if you ARE using it – I would be very interested to hear about your experiences.   The last change to make you aware of in the execution report is that by default I no longer show OnPreValidate or OnPostValidate messages as I consider them to be superfluous and only serve to clutter up the results. If you want to put them back, well, its open source so go right ahead!   The latest release of SSIS Reporting Pack that contains all of these changes is v0.4 and can be downloaded from http://ssisreportingpack.codeplex.com/releases/view/88178   Feedback on all of the above changes would be very much appreciated. @Jamiet

  Read the article

• GameplayScreen does not contain a definition for GraphicsDevice

  - by Dave Voyles

  Long story short: I'm trying to intergrate my game with Microsoft's Game State Management. In doing so I've run into some errors, and the latest one is in the title. I'm not able to display my HUD for the reasons listed above. Previously, I had much of my code in my Game.cs class, but the GSM has a bit of it in Game1, and most of what you have drawn for the main screen in your GameplayScreen class, and that is what is causing confusion on my part. I've created an instance of the GameplayScreen class to be used in the HUD class (as you can see below). Before integrating with the GSM however, I created an instance of my Game class, and all worked fine. It seems that I need to define my graphics device somewhere, but I am not sure of where exactly. I've left some code below to help you understand. public class GameStateManagementGame : Microsoft.Xna.Framework.Game { #region Fields GraphicsDeviceManager graphics; ScreenManager screenManager; // Creates a new intance, which is used in the HUD class public static Game Instance; // By preloading any assets used by UI rendering, we avoid framerate glitches // when they suddenly need to be loaded in the middle of a menu transition. static readonly string[] preloadAssets = { "gradient", }; #endregion #region Initialization /// <summary> /// The main game constructor. /// </summary> public GameStateManagementGame() { Content.RootDirectory = "Content"; graphics = new GraphicsDeviceManager(this); graphics.PreferredBackBufferWidth = 1280; graphics.PreferredBackBufferHeight = 720; graphics.IsFullScreen = false; graphics.ApplyChanges(); // Create the screen manager component. screenManager = new ScreenManager(this); Components.Add(screenManager); // Activate the first screens. screenManager.AddScreen(new BackgroundScreen(), null); //screenManager.AddScreen(new MainMenuScreen(), null); screenManager.AddScreen(new PressStartScreen(), null); } namespace Pong { public class HUD { public void Update(GameTime gameTime) { // Used in the Draw method titleSafeRectangle = new Rectangle (GameplayScreen.Instance.GraphicsDevice.Viewport.TitleSafeArea.X, GameplayScreen.Instance.GraphicsDevice.Viewport.TitleSafeArea.Y, GameplayScreen.Instance.GraphicsDevice.Viewport.TitleSafeArea.Width, GameplayScreen.Instance.GraphicsDevice.Viewport.TitleSafeArea.Height); } } } class GameplayScreen : GameScreen { #region Fields ContentManager content; public static GameStates gamestate; private GraphicsDeviceManager graphics; public int screenWidth; public int screenHeight; private Texture2D backgroundTexture; private SpriteBatch spriteBatch; private Menu menu; private SpriteFont arial; private HUD hud; Animation player; // Creates a new intance, which is used in the HUD class public static GameplayScreen Instance; public GameplayScreen() { TransitionOnTime = TimeSpan.FromSeconds(1.5); TransitionOffTime = TimeSpan.FromSeconds(0.5); } protected void Initialize() { lastScored = false; menu = new Menu(); resetTimer = 0; resetTimerInUse = true; ball = new Ball(content, new Vector2(screenWidth, screenHeight)); SetUpMulti(); input = new Input(); hud = new HUD(); // Places the powerup animation inside of the surrounding box // Needs to be cleaned up, instead of using hard pixel values player = new Animation(content.Load<Texture2D>(@"gfx/powerupSpriteSheet"), new Vector2(103, 44), 64, 64, 4, 5); // Used by for the Powerups random = new Random(); vec = new Vector2(100, 50); vec2 = new Vector2(100, 100); promptVec = new Vector2(50, 25); timer = 10000.0f; // Starting value for the cooldown for the powerup timer timerVector = new Vector2(10, 10); //JEP - one time creation of powerup objects playerOnePowerup = new Powerup(); playerOnePowerup.Activated += PowerupActivated; playerOnePowerup.Deactivated += PowerupDeactivated; playerTwoPowerup = new Powerup(); playerTwoPowerup.Activated += PowerupActivated; playerTwoPowerup.Deactivated += PowerupDeactivated; //JEP - moved from events since these only need set once activatedVec = new Vector2(100, 125); deactivatedVec = new Vector2(100, 150); powerupReady = false; }

  Read the article

• .NET Security Part 4

  - by Simon Cooper

  Finally, in this series, I am going to cover some of the security issues that can trip you up when using sandboxed appdomains. DISCLAIMER: I am not a security expert, and this is by no means an exhaustive list. If you actually are writing security-critical code, then get a proper security audit of your code by a professional. The examples below are just illustrations of the sort of things that can go wrong. 1. AppDomainSetup.ApplicationBase The most obvious one is the issue covered in the MSDN documentation on creating a sandbox, in step 3 – the sandboxed appdomain has the same ApplicationBase as the controlling appdomain. So let’s explore what happens when they are the same, and an exception is thrown. In the sandboxed assembly, Sandboxed.dll (IPlugin is an interface in a partially-trusted assembly, with a single MethodToDoThings on it): public class UntrustedPlugin : MarshalByRefObject, IPlugin { // implements IPlugin.MethodToDoThings() public void MethodToDoThings() { throw new EvilException(); } } [Serializable] internal class EvilException : Exception { public override string ToString() { // show we have read access to C:\Windows // read the first 5 directories Console.WriteLine("Pwned! Mwuahahah!"); foreach (var d in Directory.EnumerateDirectories(@"C:\Windows").Take(5)) { Console.WriteLine(d.FullName); } return base.ToString(); } } And in the controlling assembly: // what can possibly go wrong? AppDomainSetup appDomainSetup = new AppDomainSetup { ApplicationBase = AppDomain.CurrentDomain.SetupInformation.ApplicationBase } // only grant permissions to execute // and to read the application base, nothing else PermissionSet restrictedPerms = new PermissionSet(PermissionState.None); restrictedPerms.AddPermission( new SecurityPermission(SecurityPermissionFlag.Execution)); restrictedPerms.AddPermission( new FileIOPermission(FileIOPermissionAccess.Read, appDomainSetup.ApplicationBase); restrictedPerms.AddPermission( new FileIOPermission(FileIOPermissionAccess.pathDiscovery, appDomainSetup.ApplicationBase); // create the sandbox AppDomain sandbox = AppDomain.CreateDomain("Sandbox", null, appDomainSetup, restrictedPerms); // execute UntrustedPlugin in the sandbox // don't crash the application if the sandbox throws an exception IPlugin o = (IPlugin)sandbox.CreateInstanceFromAndUnwrap("Sandboxed.dll", "UntrustedPlugin"); try { o.MethodToDoThings() } catch (Exception e) { Console.WriteLine(e.ToString()); } And the result? Oops. We’ve allowed a class that should be sandboxed to execute code with fully-trusted permissions! How did this happen? Well, the key is the exact meaning of the ApplicationBase property: The application base directory is where the assembly manager begins probing for assemblies. When EvilException is thrown, it propagates from the sandboxed appdomain into the controlling assembly’s appdomain (as it’s marked as Serializable). When the exception is deserialized, the CLR finds and loads the sandboxed dll into the fully-trusted appdomain. Since the controlling appdomain’s ApplicationBase directory contains the sandboxed assembly, the CLR finds and loads the assembly into a full-trust appdomain, and the evil code is executed. So the problem isn’t exactly that the sandboxed appdomain’s ApplicationBase is the same as the controlling appdomain’s, it’s that the sandboxed dll was in such a place that the controlling appdomain could find it as part of the standard assembly resolution mechanism. The sandbox then forced the assembly to load in the controlling appdomain by throwing a serializable exception that propagated outside the sandbox. The easiest fix for this is to keep the sandbox ApplicationBase well away from the ApplicationBase of the controlling appdomain, and don’t allow the sandbox permissions to access the controlling appdomain’s ApplicationBase directory. If you do this, then the sandboxed assembly can’t be accidentally loaded into the fully-trusted appdomain, and the code can’t be executed. If the plugin does try to induce the controlling appdomain to load an assembly it shouldn’t, a SerializationException will be thrown when it tries to load the assembly to deserialize the exception, and no damage will be done. 2. Loading the sandboxed dll into the application appdomain As an extension of the previous point, you shouldn’t directly reference types or methods in the sandboxed dll from your application code. That loads the assembly into the fully-trusted appdomain, and from there code in the assembly could be executed. Instead, pull out methods you want the sandboxed dll to have into an interface or class in a partially-trusted assembly you control, and execute methods via that instead (similar to the example above with the IPlugin interface). If you need to have a look at the assembly before executing it in the sandbox, either examine the assembly using reflection from within the sandbox, or load the assembly into the Reflection-only context in the application’s appdomain. The code in assemblies in the reflection-only context can’t be executed, it can only be reflected upon, thus protecting your appdomain from malicious code. 3. Incorrectly asserting permissions You should only assert permissions when you are absolutely sure they’re safe. For example, this method allows a caller read-access to any file they call this method with, including your documents, any network shares, the C:\Windows directory, etc: [SecuritySafeCritical] public static string GetFileText(string filePath) { new FileIOPermission(FileIOPermissionAccess.Read, filePath).Assert(); return File.ReadAllText(filePath); } Be careful when asserting permissions, and ensure you’re not providing a loophole sandboxed dlls can use to gain access to things they shouldn’t be able to. Conclusion Hopefully, that’s given you an idea of some of the ways it’s possible to get past the .NET security system. As I said before, this post is not exhaustive, and you certainly shouldn’t base any security-critical applications on the contents of this blog post. What this series should help with is understanding the possibilities of the security system, and what all the security attributes and classes mean and what they are used for, if you were to use the security system in the future.

  Read the article

• SSIS Reporting Pack v0.4 – Execution Report updated

  - by jamiet

  SSIS Reporting Pack is a suite of reports that I maintain at http://ssisreportingpack.codeplex.com/ that provide visualisation over the SSIS Catalog in SQL Server 2012 and attempt to add value over the reports that ship in the box. Work on the reports has stalled (my last SSIS Reporting Pack blog post was on 4th September 2011) as I’ve had rather more important things going on my life of late however I have recently checked-in a fix that couldn’t really be delayed. I discovered a problem with the Execution report that was causing the report to effectively hang, it was caused by this bit of SQL hidden away in the report definition: [generated_executables] AS (   SELECT  [new_executable].[execution_path],[new_executable].[parent_execution_path]   FROM    (           SELECT  [execution_path] = SUBSTRING([loop_iteration].[execution_path] ,1, [loop_iteration].length_exec_path - [loop_iteration].[char_index_close_square] + 1)           ,       [parent_execution_path] = SUBSTRING([loop_iteration].[execution_path] ,1, [loop_iteration].length_exec_path - [loop_iteration].[char_index_open_square])           FROM    (                   SELECT  [execution_path]                   ,       [char_index_open_square] = CHARINDEX('[',REVERSE([execution_path]),1)                   ,       [char_index_close_square] = CHARINDEX(']',REVERSE([execution_path]),1)                   ,       [length_exec_path] = LEN([execution_path])                   FROM    [exec_stats] es                   WHERE   execution_path LIKE '%\[%]%'  ESCAPE '\'                   )AS [loop_iteration]           ) AS [new_executable]   GROUP   BY [new_executable].[execution_path],[new_executable].[parent_execution_path]) It was there because SSIS does not currently treat a loop iteration as an executable yet I figured there was still value in being able to view it as such – this SQL essentially “invents” new executables for those loop iterations; its what enabled the following visualisation: where each of the three iterations of a For Each Loop called “FEL Loop over top performing regions” appear in the report. Unfortunately, as I alluded, this could under certain circumstances (most likely when there were many loop iterations) cause the report to hang as it waited for the results to be constructed and returned. The change that I have made eradicates this generation of “fake” executables and thus produces this visualisation instead: Notice that the three “children” of the For Each Loop are no longer the three iterations but actually the task (“EPT Call Data Export Package”) contained within that For Each Loop. The problem here is of course that there is no longer a visual distinction between those three iterations; I have instead made the full execution path viewable via a tooltip:   If you preferred the “old” way of presenting this information and are happy to put up with the performance degradation then I have kept the old version of the report hanging around in the reporting pack as “execution loop with iterations” however none of the other reports link to it so you will have to browse to it manually if you want to use it. Please let me know if you ARE using it – I would be very interested to hear about your experiences.   The last change to make you aware of in the execution report is that by default I no longer show OnPreValidate or OnPostValidate messages as I consider them to be superfluous and only serve to clutter up the results. If you want to put them back, well, its open source so go right ahead!   The latest release of SSIS Reporting Pack that contains all of these changes is v0.4 and can be downloaded from http://ssisreportingpack.codeplex.com/releases/view/88178   Feedback on all of the above changes would be very much appreciated. @Jamiet

  Read the article

• Mobile Apps for Oracle E-Business Suite

  - by Carlos Chang

  Crosspost from the mobile apps blog.  TL;DR Oracle E-Business Suite is now building mobile apps with Oracle Mobile Application Framework (MAF). Believe it! Build iOS and Android apps with once code base and get it done! By Steven Chan (Oracle Development)  Many things have changed in the mobile space over the last few years. Here's an update on our strategy for mobile apps for the E-Business Suite. Mobile app strategy We're building our family of mobile apps for the E-Business Suite using Oracle Mobile Application Framework.  This framework allows us to write a single application that can be run on Apple iOS and Google Android platforms. Mobile apps for the E-Business Suite will share a common look-and-feel. The E-Business Suite is a suite of over 200 product modules spanning Financials, Supply Chain, Human Resources, and many other areas. Our mobile app strategy is to release standalone apps for specific product modules.  Our Oracle Timecards app, which allows users to create and submit timecards, is an example of a standalone app. Some common functions that span multiple product areas will have dedicated apps, too. An example of this is ourOracle Approvals app, which allows users to review and approve requests for expenses, requisitions, purchase orders, recruitment vacancies and offers, and more. You can read more about our Oracle Mobile Approvals app here: Now Available: Oracle Mobile Approvals for iOS Our goal is to support smaller screen (e.g. smartphones) as well as larger screens (e.g. tablets), with the smaller screen versions generally delivered first.  Where possible, we will deliver these as universal apps.  An example is our Oracle Mobile Field Service app, which allows field service technicians to remotely access customer, product, service request, and task-related information.  This app can run on a smartphone, while providing a richer experience for tablets. Deploying EBS mobile apps The mobile apps, themselves (i.e. client-side components) can be downloaded by end-users from the Apple iTunes today.  Android versions will be available from Google play. You can monitor this blog for Android-related updates. Where possible, our mobile apps should be deployable with a minimum of server-side changes.  These changes will generally involve a consolidated server-side patch for technology-stack components, and possibly a server-side patch for the functional product module. Updates to existing mobile apps may require new server-side components to enable all of the latest mobile functionality. All EBS product modules are certified for internal intranet deployments (i.e. used by employees within an organization's firewall).  Only a subset of EBS products such as iRecruitment are certified to be deployed externally (i.e. used by non-employees outside of an organization's firewall).  Today, many organizations running the E-Business Suite do not expose their EBS environment externally and all of the mobile apps that we're building are intended for internal employee use.  Recognizing this, our mobile apps are currently designed for users who are connected to the organization's intranet via VPN.  We expect that this may change in future updates to our mobile apps. Mobile apps and internationalization The initial releases of our mobile apps will be in English.  Later updates will include translations for all left-to-right languages supported by the E-Business Suite.  Right-to-left languages will not be translated. Customizing apps for enterprise deployments The current generation of mobile apps for Oracle E-Business Suite cannot be customized. We are evaluating options for limited customizations, including corporate branding with logos, corporate color schemes, and others. This is a potentially-complex area with many tricky implications for deployment and maintenance.  We would be interested in hearing your requirements for customizations in enterprise deployments.Prerequisites Apple iOS 7 and higher Android 4.1 (API level 16) and higher, with minimum CPU/memory configurations listed here EBS 12.1: EBS 12.1.3 Family Packs for the related product module EBS 12.2.3 References Oracle E-Business Suite Mobile Apps, Release 12.1 and 12.2 Documentation (Note 1641772.1) Oracle E-Business Suite Mobile Apps Administrator's Guide, Release 12.1 and 12.2 (Note 1642431.1) Follow @OracleMobile on Twitter Oracle Mobile Blog is here. 

  Read the article

• Second Day of Data Integration Track at OpenWorld 2012

  - by Doug Reid

  0 false 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Our second day at OpenWorld and the Data Integration Team was very active with customer meetings, product updates, product demonstrations, sessions, plus much more.  If the volume of traffic by our demo pods is any indicator, this is a record year for attendance at OpenWorld.  The DIS team have had tremendous number of people stop by our demo pods to learn about the latest product releases or to speak to one of our product managers.    For Oracle GoldenGate, there has been a great deal of interest in Integrated Capture and the  Oracle GoldenGate Monitor plug-in for Enterprise Manager.  Our customer panels this year have been very well attended and on Tuesday we held the “Real World Operational Reporting with Oracle GoldenGate Customer Panel”. On this panel this year we had Michael Wells from Raymond James, Joy Mathew and Venki Govindarajan from Comcast, and Serkan Karatas from Turk Telekom. Our panelists have a great mix of experiences and all are passionate about using Oracle Data Integration products to solve very complex use cases. Each panelist was given a ten minute to overview their use of our product, followed by a barrage of questions from the audience. Michael Wells spoke about using Oracle GoldenGate for heterogeneous real time replication from HP (Tandem) NonStop to SQL Server and emphasized the need for using standard naming conventions for when customers configure GoldenGate, as the practices is immensely helpful when debugging a problem. Joy Mathew and Venkat Govindarajan from Comcast described how they have used GoldenGate for over a decade and their experiences of using the product for replicating data from HP nonstop to Terdata. Serkan Karatas from Turk Telekom dove into using Oracle GoldenGate and the value of archiving data in extremely large databases, which in Turk Telekoms case resulted in a 1 month ROI for the entire project. Thanks again to our panelist and audience participants for making the session interactive and informative.  For Wednesday we have a number of sessions available to attendees plus two hands-on labs, which I have listed below.   If you are unable to attend our hands-on lab for Oracle GoldenGate Veridata, it is available online at youtube.com. Sessions  11:45 AM - 12:45 PM Best Practices for High Availability with Oracle GoldenGate on Oracle Exadata -Moscone South - 102 1:15 PM - 2:15 PM Customer Perspectives: Oracle Data Integrator -Marriott Marquis - Golden Gate C3 Oracle GoldenGate Case Study: Real-Time Operational Reporting Deployment at Oracle -Moscone West - 2003 Data Preparation and Ongoing Governance with the Oracle Enterprise Data Quality Platform -Moscone West - 3000 3:30 PM - 4:30 PM Best Practices for Conflict Detection and Resolution in Oracle GoldenGate for Active/Active -Moscone West - 3000 5:00 PM - 6:00 PM Tuning and Troubleshooting Oracle GoldenGate on Oracle Database -Moscone South - 102 0 false 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Hands-on Labs 10:15 AM - 11:15 AM Introduction to Oracle GoldenGate Veridata Marriott Marquis - Salon 1/2 11:45 AM - 12:45 PM Oracle Data Integrator and Oracle SOA Suite: Hands-on Lab -Marriott Marquis - Salon 1/2 If you are at OpenWorld please join us in these sessions. For a full review of data integration track at OpenWorld please see our Focus-On Document.

  Read the article

• Checksum Transformation

  The Checksum Transformation computes a hash value, the checksum, across one or more columns, returning the result in the Checksum output column. The transformation provides functionality similar to the T-SQL CHECKSUM function, but is encapsulated within SQL Server Integration Services, for use within the pipeline without code or a SQL Server connection. As featured in The Microsoft Data Warehouse Toolkit by Joy Mundy and Warren Thornthwaite from the Kimbal Group. Have a look at the book samples especially Sample package for custom SCD handling. All input columns are passed through the transformation unaltered, those selected are used to generate the checksum which is passed out through a single output column, Checksum. This does not restrict the number of columns available downstream from the transformation, as columns will always flow through a transformation. The Checksum output column is in addition to all existing columns within the pipeline buffer. The Checksum Transformation uses an algorithm based on the .Net framework GetHashCode method, it is not consistent with the T-SQL CHECKSUM() or BINARY_CHECKSUM() functions. The transformation does not support the following Integration Services data types, DT_NTEXT, DT_IMAGE and DT_BYTES. ChecksumAlgorithm Property There ChecksumAlgorithm property is defined with an enumeration. It was first added in v1.3.0, when the FrameworkChecksum was added. All previous algorithms are still supported for backward compatibility as ChecksumAlgorithm.Original (0). Original - Orginal checksum function, with known issues around column separators and null columns. This was deprecated in the first SQL Server 2005 RTM release. FrameworkChecksum - The hash function is based on the .NET Framework GetHash method for object types. This is based on the .NET Object.GetHashCode() method, which unfortunately differs between x86 and x64 systems. For that reason we now default to the CRC32 option. CRC32 - Using a standard 32-bit cyclic redundancy check (CRC), this provides a more open implementation. The component is provided as an MSI file, however to complete the installation, you will have to add the transformation to the Visual Studio toolbox by hand. This process has been described in detail in the related FAQ entry for How do I install a task or transform component?, just select Checksum from the SSIS Data Flow Items list in the Choose Toolbox Items window. Downloads The Checksum Transformation is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Checksum Transformation for SQL Server 2005 Checksum Transformation for SQL Server 2008 Checksum Transformation for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.27 – SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2010) SQL Server 2008 Version 2.0.0.27 – Fix for CRC-32 algorithm that inadvertently made it sort dependent. Fix for race condition which sometimes lead to the error Item has already been added. Key in dictionary: '79764919' . Fix for upgrade mappings between 2005 and 2008. (19 Oct 2010) Version 2.0.0.24 - SQL Server 2008 release. Introduces the new CRC-32 algorithm, which is consistent across x86 and x64.. The default algorithm is now CRC32. (29 Oct 2008) Version 2.0.0.6 - SQL Server 2008 pre-release. This version was released by mistake as part of the site migration, and had known issues. (20 Oct 2008) SQL Server 2005 Version 1.5.0.43 – Fix for CRC-32 algorithm that inadvertently made it sort dependent. Fix for race condition which sometimes lead to the error Item has already been added. Key in dictionary: '79764919' . (19 Oct 2010) Version 1.5.0.16 - Introduces the new CRC-32 algorithm, which is consistent across x86 and x64. The default algorithm is now CRC32. (20 Oct 2008) Version 1.4.0.0 - Installer refresh only. (22 Dec 2007) Version 1.4.0.0 - Refresh for minor UI enhancements. (5 Mar 2006) Version 1.3.0.0 - SQL Server 2005 RTM. The checksum algorithm has changed to improve cardinality when calculating multiple column checksums. The original algorithm is still available for backward compatibility. Fixed custom UI bug with Output column name not persisting. (10 Nov 2005) Version 1.2.0.1 - SQL Server 2005 IDW 15 June CTP. A user interface is provided, as well as the ability to change the checksum output column name. (29 Aug 2005) Version 1.0.0 - Public Release (Beta). (30 Oct 2004) Screenshot

  Read the article

• Training a 'replacement', how to enforce standards?

  - by Mohgeroth

  Not sure that this is the right stack exchange site to ask this of, but here goes... Scope I work for a small company that employs a few hundred people. The development team for the company is small and works out of visual foxpro. A specific department in the company hired me in as a 'lone gunman' to fix and enhance a pre-existing invoicing system. I've successfully taken an Access application that suffered from a lot of risks and limitations and converted it into a C# application driven off of a SQL server backend. I have recently obtained my undergraduate and am no expert by any means. To help make up for that I've felt that earning microsoft certifications will force me to understand more about .net and how it functions. So, after giving my notice with 9 months in advance, 3 months ago a replacement finally showed up. Their role is to learn what I have been designing to an attempt to support the applications designed in C#. The Replacement Fresh out of college with no real-world work experience, the first instinct for anything involving data was and still is listboxes... any time data is mentioned the list box is the control of choice for the replacement. This has gotten to the point, no matter how many times I discuss other controls, where I've seen 5 listboxes on a single form. Classroom experience was almost all C++ console development. So, an example of where I have concern is in a winforms application: Users need to key Reasons into a table to select from later. Given that I know that a strongly typed data set exists, I can just drag the data source from the toolbox and it would create all of this for me. I realize this is a simple example but using databinding is the key. For the past few months now we have been talking about the strongly typed dataset, how to use it and where it interacts with other controls. Data sets, how they work in relation to binding sources, adapters and data grid views. After handing this project off I expected questions about how to implement these since for me this is the way to do it. What happened next simply floors me: An instance of an adapter from the strongly typed dataset was created in the activate event of the form, a table was created and filled with data. Then, a loop was made to manually add rows to a listbox from this table. Finally, a variable was kept to do lookups to figure out what ID the record was for updates if required. How do they modify records you ask? That was my first question too. You won't believe how simple it is, all you do it double click and they type into a pop-up prompt the new value to change it to. As a data entry operator, all the modal popups would drive me absolutely insane. The final solution exceeds 100 lines of code that must be maintained. So my concern is that none of this is sinking in... the department is only allowed 20 hours a week of their time. Up until last week, we've only been given 4-5 hours a week if I'm lucky. The past week or so, I've been lucky to get 10. Question WHAT DO I DO?! I have 4 weeks left until I leave and they fully 'support' this application. I love this job and the opportunity it has given me but it's time for me to spread my wings and find something new. I am in no way, shape or form convinced that they are ready to take over. I do feel that the replacement has the technical ability to 'figure it out' but instead of learning they just write code to do all of this stuff manually. If the replacement wants to code differently in the end, as long as it works I'm fine with that as horrifiying at it looks. However to support what I have designed they MUST to understand how it works and how I have used controls and the framework to make 'magic' happen. This project has about 40 forms, a database with over 30 some odd tables, triggers and stored procedures. It relates labor to invoices to contracts to projections... it's not as simple as it was three years ago when I began this project and the department is now in a position where they cannot survive without it. How in the world can I accomplish any of the following?: Enforce standards or understanding in constent design when the department manager keeps telling them they can do it however they want to Find a way to engage the replacement in active learning of the framework and system design that support must be given for Gracefully inform sr. management that 5-9 hours a week is simply not enough time to learn about the department, pre-existing processes, applications that need to be supported AND determine where potential enhancements to the system go... Yes I know this is a wall of text, thanks for reading through me but I simply don't know what I should be doing. For me, this job is a monster of a reference and things would look extremely bad if I left and things fell apart. How do I handle this?

  Read the article

• VirtualBox appliance for the Oracle Communications Service Delivery Platform (SDP) Products

  - by chlander

  It's been quite awhile since we last blogged. This blog is written by Leif Lourie, a Curriculum Developer for the Oracle Communications Service Delivery Platform (SDP) products. For the last 8 years, Leif has worked as a Curriculum Developer for many of the telecom-oriented products that Oracle offers. He has been working in the telecom industry for about 25 years and has also worked as a software developer, project manager, and solutions architect. He is currently working on courseware for an upcoming release for one of the Service Delivery Platform products. Thanks to Leif not only for this blog, but for making the VM described in the blog available. Cheryl Lander, Oracle Communications InfoDev Senior Director To be able to download, install and test a product within a day is many times very important for people that are doing the primary evaluation of a software product. If it takes longer, it will require a bigger effort, like a proof-of-concept project with many people involved. Of course, if the product is chosen for a more thorough test, it will probably happen anyway, but then maybe with focus on integration instead of product features. We have a long tradition of creating complex software that is easy to install and test and we have often been praised for the ease of getting our products up and running. One key for this has been that there has always been an installer for Windows, as well as for the production environments that usually are Unix and Linux. And, the windows installer has, in most cases, been released for developing and testing purposes. Lately, this has changed. Our products are very seldom released for the Windows platform, at all. And even the Linux versions are almost always released for 64-bit systems. This is creating problems for many of the people that want to try out our products, since few have access to a 64-bit Linux system of the right platform. Most of us are using a laptop with Windows or Mac OS. Some of us are using Linux or Solaris, but probably a non certified distribution for the product you want to test. My job, among other things, is to develop hands-on practices for our products. For me, it is crucial to have access to environments for installing and using our products. For this reason I have been using virtual machines for many years.I have a ready-made base system, with the necessary tools installed for all the products I create hands-on practices for. Whenever I start working on hands-on practices for a new product or a new version, I just copy the base system and start working with a clean slate. This saves me a lot of time! Now, I would like to start saving time for my favorite student: You! If you are using our products and regularly test new versions you might benefit from the virtual machine that is now available on Oracle Technology Network: The Virtual Machine for the Oracle Communications Service Delivery Platform (SDP) Products. This virtual machine contains an installation of the 64-bit version of Oracle Enterprise Linux, version 6. It also has Oracle Database Express Edition (XE), Oracle Java and Oracle Enterprise Pack for Eclipse installed. By using Oracle VM VirtualBox you may use Windows, OS X, Linux or Solaris on your laptop. VirtualBox can be installed on top of any of these platforms and give you the ability to run virtual machines in your laptop. After downloading and starting the virtual machine you will also need to download the installation files for the product you want to test; for example Oracle Communications Services Gatekeeper or Oracle Communications Online Mediation Controller. In some cases there are lessons and practices available for the products. The freely available courses are listed in Oracle Learning Library as a Collection of Oracle Communications Service Delivery Platform Courses. As time goes by, we will make this list collection bigger. Also, the goal is to update the virtual machine about one to two times per year. So you will always be able to get a well maintained virtual machine for the Service Delivery Platform products from us. We Value Your Feedback If you would like to suggest improvements or report issues on any of the product documentation, curriculum, or training produced by the Oracle Communications Information Development team, you can use these channels: Email [email protected]. Post a comment on this blog. Thanks for reading!

  Read the article

• Session Report - Modern Software Development Anti-Patterns

  - by Janice J. Heiss

  In this standing-room-only session, building upon his 2011 JavaOne Rock Star “Diabolical Developer” session, Martijn Verburg, this time along with Ben Evans, identified and explored common “anti-patterns” – ways of doing things that keep developers from doing their best work. They emphasized the importance of social interaction and team communication, along with identifying certain psychological pitfalls that lead developers astray. Their emphasis was less on technical coding errors and more how to function well and to keep one’s focus on what really matters. They are the authors of the highly regarded The Well-Grounded Java Developer and are both movers and shakers in the London JUG community and on the Java Community Process. The large room was packed as they gave a fast-moving, witty presentation with lots of laughs and personal anecdotes. Below are a few of the anti-patterns they discussed.Anti-Pattern One: Conference-Driven DeliveryThe theme here is the belief that “Real pros hack code and write their slides minutes before their talks.” Their response to this anti-pattern is an expression popular in the military – PPPPPP, which stands for, “Proper preparation prevents piss-poor performance.”“Communication is very important – probably more important than the code you write,” claimed Verburg. “The more you speak in front of large groups of people the easier it gets, but it’s always important to do dry runs, to present to smaller groups. And important to be members of user groups where you can give presentations. It’s a great place to practice speaking skills; to gain new skills; get new contacts, to network.”They encouraged attendees to record themselves and listen to themselves giving a presentation. They advised them to start with a spouse or friends if need be. Learning to communicate to a group, they argued, is essential to being a successful developer. The emphasis here is that software development is a team activity and good, clear, accessible communication is essential to the functioning of software teams. Anti-Pattern Two: Mortgage-Driven Development The main theme here was that, in a period of worldwide recession and economic stagnation, people are concerned about keeping their jobs. So there is a tendency for developers to treat knowledge as power and not share what they know about their systems with their colleagues, so when it comes time to fix a problem in production, they will be the only one who knows how to fix it – and will have made themselves an indispensable cog in a machine so you cannot be fired. So developers avoid documentation at all costs, or if documentation is required, put it on a USB chip and lock it in a lock box. As in the first anti-pattern, the idea here is that communicating well with your colleagues is essential and documentation is a key part of this. Social interactions are essential. Both Verburg and Evans insisted that increasingly, year by year, successful software development is more about communication than the technical aspects of the craft. Developers who understand this are the ones who will have the most success. Anti-Pattern Three: Distracted by Shiny – Always Use the Latest Technology to Stay AheadThe temptation here is to pick out some obscure framework, try a bit of Scala, HTML5, and Clojure, and always use the latest technology and upgrade to the latest point release of everything. Don’t worry if something works poorly because you are ahead of the curve. Verburg and Evans insisted that there need to be sound reasons for everything a developer does. Developers should not bring in something simply because for some reason they just feel like it or because it’s new. They recommended a site run by a developer named Matt Raible with excellent comparison spread sheets regarding Web frameworks and other apps. They praised it as a useful tool to help developers in their decision-making processes. They pointed out that good developers sometimes make bad choices out of boredom, to add shiny things to their CV, out of frustration with existing processes, or just from a lack of understanding. They pointed out that some code may stay in a business system for 15 or 20 years, but not all code is created equal and some may change after 3 or 6 months. Developers need to know where the code they are contributing fits in. What is its likely lifespan? Anti-Pattern Four: Design-Driven Design The anti-pattern: If you want to impress your colleagues and bosses, use design patents left, right, and center – MVC, Session Facades, SOA, etc. Or the UML modeling suite from IBM, back in the day… Generate super fast code. And the more jargon you can talk when in the vicinity of the manager the better.Verburg shared a true story about a time when he was interviewing a guy for a job and asked him what his previous work was. The interviewee said that he essentially took patterns and uses an approved book of Enterprise Architecture Patterns and applied them. Verburg was dumbstruck that someone could have a job in which they took patterns from a book and applied them. He pointed out that the idea that design is a separate activity is simply wrong. He repeated a saying that he uses, “You should pay your junior developers for the lines of code they write and the things they add; you should pay your senior developers for what they take away.”He explained that by encouraging people to take things away, the code base gets simpler and reflects the actual business use cases developers are trying to solve, as opposed to the framework that is being imposed. He told another true story about a project to decommission a very long system. 98% of the code was decommissioned and people got a nice bonus. But the 2% remained on the mainframe so the 98% reduction in code resulted in zero reduction in costs, because the entire mainframe was needed to run the 2% that was left. There is an incentive to get rid of source code and subsystems when they are no longer needed. The session continued with several more anti-patterns that were equally insightful.

  Read the article

• Educause Top-Ten IT Issues - the most change in a decade or more

  - by user739873

  The Education IT Issue Panel has released the 2012 top-ten issues facing higher education IT leadership, and instead of the customary reshuffling of the same deck, the issues reflect much of the tumult and dynamism facing higher education generally.  I find it interesting (and encouraging) that at the top of this year's list is "Updating IT Professionals' Skills and Roles to Accommodate Emerging Technologies and Changing IT Management and Service Delivery Models."  This reflects, in my view, the realization that higher education IT must change in order to fully realize the potential for transforming the institution, and therefore it's people must learn new skills, understand and accept new ways of solving problems, and not be tied down by past practices or institutional inertia. What follows in the remaining 9 top issues all speak, in some form or fashion, to the need for dramatic change, but not just in the areas of "funding IT" (code for cost containment or reduction), but rather the need to increase effectiveness and efficiency of the institution through the use of technology—leveraging the wave of BYOD (Bring Your Own Device) to the institution's advantage, rather than viewing it as a threat and a problem to be contained. Although it's #10 of 10, IT Governance (and establishment and implementation of the governance model throughout the institution) is key to effectively acting upon many of the preceding issues in this year's list.  In the majority of cases, technology exists to meet the needs and requirements to effectively address many of the challenges outlined in top-ten issues list. Which brings me to my next point. Although I try not to sound too much like an Oracle commercial in these (all too infrequent) blog posts, I can't help but point out how much confluence there is between several of the top issues this year and what my colleagues and I have been evangelizing for some time. Starting from the bottom of the list up: 1) I'm gratified that research and the IT challenges it presents has made the cut.  Big Data (or Large Data as it's phased in the report) is rapidly going to overwhelm much of what exists today even at our most prepared and well-equipped research universities.  Combine large data with the significantly more stringent requirements around data preservation, archiving, sharing, curation, etc. coming from granting agencies like NSF, and you have the brewing storm that could result in a lot of "one-off" solutions to a problem that could very well be addressed collectively and "at scale."   2) Transformative effects of IT – while I see more and more examples of this, there is still much more that can be achieved. My experience tells me that culture (as the report indicates or at least poses the question) gets in the way more than technology not being up to task.  We spend too much time on "context" and not "core," and get lost in the weeds on the journey to truly transforming the institution with technology. 3) Analytics as a key element in improving various institutional outcomes.  In our work around Student Success, we see predictive "academic" analytics as essential to getting in front of the Student Success issue, regardless of how an institution or collections of institutions defines success.  Analytics must be part of the fabric of the key academic enterprise applications, not a bolt-on.  We will spend a significant amount of time on this topic during our semi-annual Education Industry Strategy Council meeting in Washington, D.C. later this month. 4) Cloud strategy for the broad range of applications in the academic enterprise.  Some of the recent work by Casey Green at the Campus Computing Survey would seem to indicate that there is movement in this area but mostly in what has been termed "below the campus" application areas such as collaboration tools, recruiting, and alumni relations.  It's time to get serious about sourcing elements of mature applications like student information systems, HR, Finance, etc. leveraging a model other than traditional on-campus custom. I've only selected a few areas of the list to highlight, but the unifying theme here (and this is where I run the risk of sounding like an Oracle commercial) is that these lofty goals cry out for partners that can bring economies of scale to bear on the problems married with a deep understanding of the nuances unique to higher education.  In a recent piece in Educause Review on Student Information Systems, the author points out that "best of breed is back". Unfortunately I am compelled to point out that best of breed is a large part of the reason we have made as little progress as we have as an industry in advancing some of the causes outlined above.  Don't confuse "integrated" and "full stack" for vendor lock-in.  The best-of-breed market forces that Ron points to ensure that solutions have to be "integratable" or they don't survive in the marketplace. However, by leveraging the efficiencies afforded by adopting solutions that are pre-integrated (and possibly metered out as a service) allows us to shed unnecessary costs – as difficult as these decisions are to make and to drive throughout the organization. Cole

  Read the article

• Defaulting the HLSL Vertex and Pixel Shader Levels to Feature Level 9_1 in VS 2012

  - by Michael B. McLaughlin

  I love Visual Studio 2012. But this is not a post about that. This is a post about tweaking one particular parameter that I’ve found a bit annoying. Disclaimer: You will be modifying important MSBuild files. If you screw up you will break your build tools. And maybe your computer will catch fire. I’m not responsible. No warranties or guaranties of any sort. This info is provided “as is”. By default, if you add a new vertex shader or pixel shader item to a project, it will be set to build with shader profile 4.0_level_9_3. If you need 9_3 functionality, this is all well and good. But (especially for Windows Store apps) you really want to target the lowest shader profile possible so that your game will run on as many computers as possible. So it’s a good idea to default to 9_1. To do this you could add in new HLSL files via “Add->New Item->Visual C++->HLSL->______ Shader File (.hlsl)” and then edit the shader files’ properties to set them manually to use 9_1 via “Properties->HLSL Compiler->General->Shader Model”. This is fine unless you forget to do this once and then submit your game with 9_3 shaders instead of 9_1 shaders to the Windows Store or to some other game store. Then you’d wind up with either rejection or angry “this doesn’t work on my computer! ripoff!” messages. There’s another option though. In “Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\ItemTemplates\VC\HLSL\1033\VertexShader” (note the path might vary slightly for you if you are using a 32-bit system or have a non-ENU version of Visual Studio 2012) you will find a “VertexShader.vstemplate” file. If you open this file in a text editor (e.g. Notepad++), then inside the CustomParameters tag within the TemplateContent tag you should see a CustomParameter tag for the ShaderType, i.e.: <CustomParameter Name="$ShaderType$" Value="Vertex"/> On a new line, we are going to add another CustomParameter tag to the CustomParameters tag. It will look like this: <CustomParameter Name="$ShaderModel$" Value="4.0_level_9_1"/> such that we now have:     <CustomParameters>       <CustomParameter Name="$ShaderType$" Value="Vertex"/>       <CustomParameter Name="$ShaderModel$" Value="4.0_level_9_1"/>     </CustomParameters> You can then save the file (you will need to be an Administrator or have Administrator access). Back in the 1033 directory (or whatever the number is for your language), go into the “PixelShader” directory. Edit the “PixelShader.vstemplate” file and make the same change (note that this time $ShaderType$ is “Pixel” not “Vertex”; you shouldn’t be changing that line anyway, but if you were to just copy and replace the above four lines then you will wind up creating pixel shaders that the HLSL compiler would try to compile as vertex shaders, with all sort of weird errors as a result). Once you’ve added the $ShaderModel$ line to “PixelShader.vstemplate” and have saved it, everything should be done. Since Feature Level 9_1 and 9_3 don’t support any of the other shader types, those are set to default to their appropriate minimums already (Compute and Geometry are set to “4.0” and Domain and Hull are set to “5.0”, which are their respective minimums (though not all 4.0 cards support Compute shaders; they were an optional feature added with DirectX 10.1 and only became required for DirectX 11 hardware). In case you are wondering where these magic values come from, you can find them all in the “fxc.xml” file in the “\Program Files (x86)\MSBuild\Microsoft.CPP\v4.0\V110\1033” directory (or whatever your language number is; 1033 is ENU and various other product languages have their own respective numbers (see: http://msdn.microsoft.com/en-us/goglobal/bb964664.aspx ) such that Japanese is 1041 (for example), though for all I know MSBuild tasks might be 1033 for everyone). If, like me, you installed VS 2012 to a drive other than the C:\ drive, you will find the vstemplate files in the drive to which you installed VS 2012 (D:\ in my case) but you will find the fxc.xml file on the C:\ drive. You should not edit fxc.xml. You will almost definitely break things by doing that; it’s just something you can look through to see all the other options that the FXC task takes such that you could, if needed, add further CustomParameter tags if you wanted to default to other supported options. I haven’t tried any others though so I don’t have any advice on how to set them.

  Read the article

• NetBeans, JSF, and MySQL Primary Keys using AUTO_INCREMENT

  - by MarkH

  I recently had the opportunity to spin up a small web application using JSF and MySQL. Having developed JSF apps with Oracle Database back-ends before and possessing some small familiarity with MySQL (sans JSF), I thought this would be a cakewalk. Things did go pretty smoothly...but there was one little "gotcha" that took more time than the few seconds it really warranted. The Problem Every DBMS has its own way of automatically generating primary keys, and each has its pros and cons. For the Oracle Database, you use a sequence and point your Java classes to it using annotations that look something like this: @GeneratedValue(strategy=GenerationType.SEQUENCE, generator="POC_ID_SEQ") @SequenceGenerator(name="POC_ID_SEQ", sequenceName="POC_ID_SEQ", allocationSize=1) Between creating the actual sequence in the database and making sure you have your annotations right (watch those typos!), it seems a bit cumbersome. But it typically "just works", without fuss. Enter MySQL. Designating an integer-based field as PRIMARY KEY and using the keyword AUTO_INCREMENT makes the same task seem much simpler. And it is, mostly. But while NetBeans cranks out a superb "first cut" for a basic JSF CRUD app, there are a couple of small things you'll need to bring to the mix in order to be able to actually (C)reate records. The (RUD) performs fine out of the gate. The Solution Omitting all design considerations and activity (!), here is the basic sequence of events I followed to create, then resolve, the JSF/MySQL "Primary Key Perfect Storm": Fire up NetBeans. Create JSF project. Create Entity Classes from Database. Create JSF Pages from Entity Classes. Test run. Try to create record and hit error. It's a simple fix, but one that was fun to find in its completeness. :-) Even though you've told it what to do for a primary key, a MySQL table requires a gentle nudge to actually generate that new key value. Two things are needed to make the magic happen. First, you need to ensure the following annotation is in place in your Java entity classes: @GeneratedValue(strategy = GenerationType.IDENTITY) All well and good, but the real key is this: in your controller class(es), you'll have a create() function that looks something like this, minus the comment line and the setId() call in bold red type:     public String create() {         try {             // Assign 0 to ID for MySQL to properly auto_increment the primary key.             current.setId(0);             getFacade().create(current);             JsfUtil.addSuccessMessage(ResourceBundle.getBundle("/Bundle").getString("CategoryCreated"));             return prepareCreate();         } catch (Exception e) {             JsfUtil.addErrorMessage(e, ResourceBundle.getBundle("/Bundle").getString("PersistenceErrorOccured"));             return null;         }     } Setting the current object's primary key attribute to zero (0) prior to saving it tells MySQL to get the next available value and assign it to that record's key field. Short and simple…but not inherently obvious if you've never used that particular combination of NetBeans/JSF/MySQL before. Hope this helps! All the best, Mark

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #004

  - by pinaldave

  Here is the list of curetted articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2006 Auto Generate Script to Delete Deprecated Fields in Current Database In early career everytime I have to drop a column, I had hard time doing it because I was scared what if that column was needed somewhere in the code. Due to this fear I never dropped any column. I just renamed the column. If the column which I renamed was needed afterwards it was very easy to rename it back again. However, it is not recommended to keep the deleted column renamed in the database. At every interval I used to drop the columns which was prefixed with specific word. This script is 6 years old but still works. Give it a look, I am open for improvements. 2007 Shrinking Truncate Log File – Log Full – Part 2 Shrinking database or mdf file is indeed bad thing and it creates lots of problems. However, once in a while there is legit requirement to shrink the log file – a very rare one. In the rare occasion shrinking or truncating the log file may be the only solution. However, one should make sure to take backup before and after the truncate or shrink as in case of a disaster they can be very useful. Remember that truncating log file will break the log chain and while restore it can create major issue. Anyway, use this feature with caution. 2008 Simple Use of Cursor to Print All Stored Procedures of Database Including Schema This is a very interesting requirement I used to face in my early career days, I needed to print all the Stored procedures of my database. Interesting enough I had written a cursor to do so. Today when I look back at this stored procedure, I believe there will be a much cleaner way to do the same task, however, I still use this SP quite often when I have to document all the stored procedures of my database. Interesting Observation about Order of Resultset without ORDER BY In industry many developers avoid using ORDER BY clause to display the result in particular order thinking that Index is enforcing the order. In this interesting example, I demonstrate that without using ORDER BY, same table and similar query can return different results. Query optimizer always returns results using any method which is optimized for performance. The learning is There is no order unless ORDER BY is used. 2009 Size of Index Table – A Puzzle to Find Index Size for Each Index on Table I asked this puzzle earlier where I asked how to find the Index size for each of the tables. The puzzle was very well received and lots of interesting answers were received. To answer this question I have written following blog posts. I suggest this weekend you try to solve this problem and see if you can come up with a better solution. If not, well here are the solutions. Solution 1 | Solution 2 | Solution 3 Understanding Table Hints with Examples Hints are options and strong suggestions specified for enforcement by the SQL Server query processor on DML statements. The hints override any execution plan the query optimizer might select for a query. The SQL Server Query optimizer is a very smart tool and it makes a better selection of execution plan. Suggesting hints to the Query Optimizer should be attempted when absolutely necessary and by experienced developers who know exactly what they are doing (or in development as a way to experiment and learn). Interesting Observation – TOP 100 PERCENT and ORDER BY I have seen developers and DBAs using TOP very causally when they have to use the ORDER BY clause. Theoretically, there is no need of ORDER BY in the view at all. All the ordering should be done outside the view and view should just have the SELECT statement in it. It was quite common that to save this extra typing by including ordering inside of the view. At several instances developers want a complete resultset and for the same they include TOP 100 PERCENT along with ORDER BY, assuming that this will simulate the SELECT statement with ORDER BY. 2010 SQLPASS Nov 8-11, 2010-Seattle – An Alternative Look at Experience In year 2010 I attended most prestigious SQL Server event SQLPASS between Nov 8-11, 2010 at Seattle. I have only one expression for the event - Best Summit Ever. Instead of writing about my usual routine or the event, I wrote about the interesting things I did and how I felt about it! When I go back and read it, I feel that this is the best event I attended in year 2010. Change Database Access to Single User Mode Using SSMS Image says all. 2011 SQL Server 2012 has introduced new analytic functions. These functions were long awaited and I am glad that they are now here. Before when any of this function was needed, people used to write long T-SQL code to simulate these functions. But now there’s no need of doing so. Having available native function also helps performance as well readability. Function SQLAuthority MSDN CUME_DIST CUME_DIST CUME_DIST FIRST_VALUE FIRST_VALUE FIRST_VALUE LAST_VALUE LAST_VALUE LAST_VALUE LEAD LEAD LEAD LAG LAG LAG PERCENTILE_CONT PERCENTILE_CONT PERCENTILE_CONT PERCENTILE_DISC PERCENTILE_DISC PERCENTILE_DISC PERCENT_RANK PERCENT_RANK PERCENT_RANK Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Myths about Coding Craftsmanship part 2

  - by tom

  Myth 3: The source of all bad code is inept developers and stupid people When you review code is this what you assume?  Shame on you.  You are probably making assumptions in your code if you are assuming so much already.  Bad code can be the result of any number of causes including but not limited to using dated techniques (like boxing when generics are available), not following standards (“look how he does the spacing between arguments!” or “did he really just name that variable ‘bln_Hello_Cats’?”), being redundant, using properties, methods, or objects in a novel way (like switching on button.Text between “Hello World” and “Hello World “ //clever use of space character… sigh), not following the SOLID principals, hacking around assumptions made in earlier iterations / hacking in features that should be worked into the overall design.  The first two issues, while annoying are pretty easy to spot and can be fixed so easily.  If your coding team is made up of experienced professionals who are passionate about staying current then these shouldn’t be happening.  If you work with a variety of skills, backgrounds, and experience then there will be some of this stuff going on.  If you have an opportunity to mentor such a developer who is receptive to constructive criticism don’t be a jerk; help them and the codebase will improve.  A little patience can improve the codebase, your work environment, and even your perspective. The novelty and redundancy I have encountered has often been the use of creativity when language knowledge was perceived as unavailable or too time consuming.  When developers learn on the job you get a lot of this.  Rather than going to MSDN developers will use what they know.  Depending on the constraints of their assignment hacking together what they know may seem quite practical.  This was not stupid though I often wonder how much time is actually “saved” by hacking.  These issues are often harder to untangle if we ever do.  They can also grow out of control as we write hack after hack to make it work and get back to some development that is satisfying. Hacking upon an existing hack is what I call “feeding the monster”.  Code monsters are anti-patterns and hacks gone wild.  The reason code monsters continue to get bigger is that they keep growing in scope, touching more and more of the application.  This is not the result of dumb developers. It is probably the result of avoiding design, not taking the time to understand the problems or anticipate or communicate the vision of the product.  If our developers don’t understand the purpose of a feature or product how do we expect potential customers to do so? Forethought and organization are often what is missing from bad code.  Developers who do not use the SOLID principals should be encouraged to learn these principals and be given guidance on how to apply them.  The time “saved” by giving hackers room to hack will be made up for and then some. Not as technical debt but as shoddy work that if not replaced will be struggled with again and again.  Bad code is not the result of dumb developers (usually) it is the result of trying to do too much without the proper resources and neglecting the right thing that needs doing with the first thoughtless thing that comes into our heads. Object oriented code is all about relationships between objects.  Coders who believe their coworkers are all fools tend to write objects that are difficult to work with, not eager to explain themselves, and perform erratically and irrationally.  If you constantly find you are surrounded by idiots you may want to ask yourself if you are being unreasonable, if you are being closed minded, of if you have chosen the right profession.  Opening your mind up to the idea that you probably work with rational, well-intentioned people will probably make you a better coder and it might even make you less grumpy.  If you are surrounded by jerks who do not engage in the exchange of ideas who do not care about their customers or the durability of the code you are building together then I suggest you find a new place to work.  Myth 4: Customers don’t care about “beautiful” code Craftsmanship is customer focused because it means that the job was done right, the product will withstand the abuse, modifications, and scrutiny of our customers.  Users can appreciate a predictable timeline for a release, a product delivered on time and on budget, a feature set that does not interfere with the task(s) it is supporting, quick turnarounds on exception messages, self healing issues, and less issues.  These are all hindered by skimping on craftsmanship.  When we write data access and when we write reusable code.   What do you think?  Does bad code come primarily from low IQ individuals?  Do customers care about beautiful code?

  Read the article

• A Visual Studio Release Grows in Brooklyn

  - by andrewbrust

  Yesterday, Microsoft held its flagship launch event for Office 2010 in Manhattan.  Today, the Redmond software company is holding a local launch event for Visual Studio (VS) 2010, in Brooklyn.  How come information workers get the 212 treatment and developers are relegated to 718? Well, here’s the thing: the Brooklyn Marriott is actually a great place for an event, but you need some intimate knowledge of New York City to know that.  NBC’s Studio 8H, where the Office launch was held yesterday (and from where SNL is broadcast) is a pretty small venue, but you’d need some inside knowledge to recognize that.  Likewise, while Office 2010 is a product whose value is apparent.  Appreciating VS 2010’s value takes a bit more savvy.  Setting aside its year-based designation, this release of VS, counting the old Visual Basic releases, is the 10th version of the product.  How can a developer audience get excited about an integrated development environment when it reaches double-digit version numbers?  Well, it can be tough.  Luckily, Microsoft sent Jay Schmelzer, a Group Program Manager from the Visual Studio team in Redmond, to come tell the Brooklyn audience why they should be excited. Turns out there’s a lot of reasons.  Support fro SharePoint development is a big one.  In previous versions of VS, that support has been anemic, at best.  Shortage of SharePoint developers is a huge issue in the industry, and this should help.  There’s also built in support for Windows Azure (Microsoft’s cloud platform) and, through a download, support for the forthcoming Windows Phone 7 platform.  ASP.NET MVC, a “close-to-the-metal” Web development option that does away with the Web Forms abstraction layer, has a first-class presence in VS.  So too does jQuery, the Open Source environment that makes JavaScript development a breeze.  The jQuery support is so good that Microsoft now contributes to that Open Source project and offers IntelliSense support for it in the code editor. Speaking of the VS code editor, it now supports multi-monitor setups, zoom-in, and block selection.  If you’re not a developer, this may sound confusing and minute.  I’ll just say that for people who are developers these are little things that really contribute to productivity, and that translates into lower development costs. The really cool demo, though, was around Visual Studio 2010’s new debugging features.  This stuff is hard to showcase, but I believe it’s truly breakthrough technology: imagine being able to step backwards in time to see what might have caused a bug.  Cool?  Now imagine being able to do that, even if you weren’t the tester and weren’t present while the testing was being done.  Then imagine being able to see a video screen capture of what the tester was doing with your app when the bug occurred.  VS 2010 allows all that.  This could be the demise of the IWOMM (“it works on my machine”) syndrome. After the keynote, I asked Schmelzer if any of Microsoft’s competitors have debugging tools that come close to VS 2010’s.  His answer was an earnest “we don’t think so.”  If that’s true, that’s a big deal, and a huge advantage for developer teams who adopt it.  It will make software development much cheaper and more efficient.  Kind of like holding a launch event at the Brooklyn Marriott instead of 30 Rock in Manhattan! VS 2010 (version 10) and Office 2010 (version 14) aren’t the only new product versions Microsoft is releasing right now.  There’s also SQL Server 2008 R2 (version 10.5), Exchange 2010 (version 8, I believe), SharePoint 2010 (version 4) and, of course, Windows 7.  With so many new versions at such levels of maturity, I think it’s fair to say Microsoft has reached middle-age.  How does a company stave off a potential mid-life crisis, especially when with young Turks like Google coming along and competing so fiercely?  Hard to say.  But if focusing on core value, including value that’s hard to play into a sexy demo, is part oft the answer, then Microsoft’s doing OK.  And if some new tricks, like Windows Phone 7, can gain some traction, that might round things out nicely. Are the legacy products old tricks, or are they revised classics?  I honestly don’t know, because it’s the market’s prerogative to pass that judgement.  I can say this though: based on today’s show, I think Microsoft’s been doing its homework.

  Read the article

• Unexpected advantage of Engineered Systems

  - by user12244672

  It's not surprising that Engineered Systems accelerate the debugging and resolution of customer issues. But what has surprised me is just how much faster issue resolution is with Engineered Systems such as SPARC SuperCluster. These are powerful, complex, systems used by customers wanting extreme database performance, app performance, and cost saving server consolidation. A SPARC SuperCluster consists or 2 or 4 powerful T4-4 compute nodes, 3 or 6 extreme performance Exadata Storage Cells, a ZFS Storage Appliance 7320 for general purpose storage, and ultra fast Infiniband switches.  Each with its own firmware. It runs Solaris 11, Solaris 10, 11gR2, LDoms virtualization, and Zones virtualization on the T4-4 compute nodes, a modified version of Solaris 11 in the ZFS Storage Appliance, a modified and highly tuned version of Oracle Linux running Exadata software on the Storage Cells, another Linux derivative in the Infiniband switches, etc. It has an Infiniband data network between the components, a 10Gb data network to the outside world, and a 1Gb management network. And customers can run whatever middleware and apps they want on it, clustered in whatever way they want. In one word, powerful.  In another, complex. The system is highly Engineered.  But it's designed to run general purpose applications. That is, the physical components, configuration, cabling, virtualization technologies, switches, firmware, Operating System versions, network protocols, tunables, etc. are all preset for optimum performance and robustness. That improves the customer experience as what the customer runs leverages our technical know-how and best practices and is what we've tested intensely within Oracle. It should also make debugging easier by fixing a large number of variables which would otherwise be in play if a customer or Systems Integrator had assembled such a complex system themselves from the constituent components.  For example, there's myriad network protocols which could be used with Infiniband.  Myriad ways the components could be interconnected, myriad tunable settings, etc. But what has really surprised me - and I've been working in this area for 15 years now - is just how much easier and faster Engineered Systems have made debugging and issue resolution. All those error opportunities for sub-optimal cabling, unusual network protocols, sub-optimal deployment of virtualization technologies, issues with 3rd party storage, issues with 3rd party multi-pathing products, etc., are simply taken out of the equation. All those error opportunities for making an issue unique to a particular set-up, the "why aren't we seeing this on any other system ?" type questions, the doubts, just go away when we or a customer discover an issue on an Engineered System. It enables a really honed response, getting to the root cause much, much faster than would otherwise be the case. Here's a couple of examples from the last month, one found in-house by my team, one found by a customer: Example 1: We found a node eviction issue running 11gR2 with Solaris 11 SRU 12 under extreme load on what we call our ExaLego test system (mimics an Exadata / SuperCluster 11gR2 Exadata Storage Cell set-up).  We quickly established that an enhancement in SRU12 enabled an 11gR2 process to query Infiniband's Subnet Manager, replacing a fallback mechanism it had used previously.  Under abnormally heavy load, the query could return results which were misinterpreted resulting in node eviction.  In several daily joint debugging sessions between the Solaris, Infiniband, and 11gR2 teams, the issue was fully root caused, evaluated, and a fix agreed upon.  That fix went back into all Solaris releases the following Monday.  From initial issue discovery to the fix being put back into all Solaris releases was just 10 days. Example 2: A customer reported sporadic performance degradation.  The reasons were unclear and the information sparse.  The SPARC SuperCluster Engineered Systems support teams which comprises both SPARC/Solaris and Database/Exadata experts worked to root cause the issue.  A number of contributing factors were discovered, including tunable parameters.  An intense collaborative investigation between the engineering teams identified the root cause to a CPU bound networking thread which was being starved of CPU cycles under extreme load.  Workarounds were identified.  Modifications have been put back into 11gR2 to alleviate the issue and a development project already underway within Solaris has been sped up to provide the final resolution on the Solaris side.  The fixed SPARC SuperCluster configuration greatly aided issue reproduction and dramatically sped up root cause analysis, allowing the correct workarounds and fixes to be identified, prioritized, and implemented.  The customer is now extremely happy with performance and robustness.  Since the configuration is common to other customers, the lessons learned are being proactively rolled out to other customers and incorporated into the installation procedures for future customers.  This effectively acts as a turbo-boost to performance and reliability for all SPARC SuperCluster customers.  If this had occurred in a "home grown" system of this complexity, I expect it would have taken at least 6 months to get to the bottom of the issue.  But because it was an Engineered System, known, understood, and qualified by both the Solaris and Database teams, we were able to collaborate closely to identify cause and effect and expedite a solution for the customer.  That is a key advantage of Engineered Systems which should not be underestimated.  Indeed, the initial issue mitigation on the Database side followed by final fix on the Solaris side, highlights the high degree of collaboration and excellent teamwork between the Oracle engineering teams.  It's a compelling advantage of the integrated Oracle Red Stack in general and Engineered Systems in particular.

  Read the article

• Remote Workers...We're Not That Bad!

  - by user12601034

  I work from home a lot – my team is located in different cities and countries, my manager is in a different city, and most of our work is done via conference calls, email and collaboration through Oracle Social Network. We’ve figured out how to be effective and involve team members, regardless of where we are all located. When I mention that I work from home, a lot of my friends will laugh, roll their eyes or use their fingers to make quotation marks around “work from home.” Their belief is that I’m sitting at home, eating bon-bons and watching television. The attempts at humor only multiply when they know that my husband also mostly works from home. So, it was with great joy that I read the Lifehacker article Why Remote Workers Are More (Yes, More) Engaged. I’m not going to re-write the article for you, but four highlights from the article include: Proximity breeds complacency –because communicating with employees sitting next to you is so easy, you may not do it well. Absence makes people try harder to connect – because you have to make an effort to connect to your team, you tend to pay better attention when you do connect Leaders of virtual team make better use of tools – when working remotely, you will use technology (many different forms of it) to connect with your team. This daily use of the tools makes you more proficient with those tools Leaders of far-flung teams maximize the time spent together – getting together takes effort, time and money, so leaders tend to filter out distractions when teams do get together. These points made me happy because I’ve seen the same things play out in my team located around the world. And I’m not saying that a virtual team is more effective than a co-located team – but my virtual team doesn’t have the option of filing into a conference room for a face-to-face meeting whenever we want. Instead, we have to figure out how to work effectively without meeting face-to-face. Am I more engaged as a remote worker? I’d like to think that I am. I’ve been on calls with colleagues at 3am – this would never happen if my only option was to be in the office. I can leave my “office” to pick up my kids from school…and I’m willingly back online after kids are in bed to finish up anything I need to. Oracle Social Network lets me use my iPad to engage with my teammates when I’m waiting at music lessons, the doctor’s office or any place else with a network connection. I feel like I’m more connected with my team, and I feel like I’m more connected with my family life. So yes, I am a remote worker, and I am engaged. If you lead a virtual team, I challenge you to increase the ways that you communicate to effectively engage your team. If you are on a virtual team, I challenge you to think about how you might interact with team members to keep both them and yourself engaged in your work. And if you have some great ideas on how to make virtual teams (and workers) effective and engaged, please share those ideas in the comments! Now, if you’ll excuse me, I need to go get a bon-bon...   :) Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• C#/.NET Little Wonders: Getting Caller Information

  - by James Michael Hare

  Originally posted on: http://geekswithblogs.net/BlackRabbitCoder/archive/2013/07/25/c.net-little-wonders-getting-caller-information.aspx Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. There are times when it is desirable to know who called the method or property you are currently executing.  Some applications of this could include logging libraries, or possibly even something more advanced that may server up different objects depending on who called the method. In the past, we mostly relied on the System.Diagnostics namespace and its classes such as StackTrace and StackFrame to see who our caller was, but now in C# 5, we can also get much of this data at compile-time. Determining the caller using the stack One of the ways of doing this is to examine the call stack.  The classes that allow you to examine the call stack have been around for a long time and can give you a very deep view of the calling chain all the way back to the beginning for the thread that has called you. You can get caller information by either instantiating the StackTrace class (which will give you the complete stack trace, much like you see when an exception is generated), or by using StackFrame which gets a single frame of the stack trace.  Both involve examining the call stack, which is a non-trivial task, so care should be done not to do this in a performance-intensive situation. For our simple example let's say we are going to recreate the wheel and construct our own logging framework.  Perhaps we wish to create a simple method Log which will log the string-ified form of an object and some information about the caller.  We could easily do this as follows: 1: static void Log(object message) 2: { 3: // frame 1, true for source info 4: StackFrame frame = new StackFrame(1, true); 5: var method = frame.GetMethod(); 6: var fileName = frame.GetFileName(); 7: var lineNumber = frame.GetFileLineNumber(); 8: 9: // we'll just use a simple Console write for now 10: Console.WriteLine("{0}({1}):{2} - {3}", 11: fileName, lineNumber, method.Name, message); 12: } So, what we are doing here is grabbing the 2nd stack frame (the 1st is our current method) using a 2nd argument of true to specify we want source information (if available) and then taking the information from the frame.  This works fine, and if we tested it out by calling from a file such as this: 1: // File c:\projects\test\CallerInfo\CallerInfo.cs 2:  3: public class CallerInfo 4: { 5: Log("Hello Logger!"); 6: } We'd see this: 1: c:\projects\test\CallerInfo\CallerInfo.cs(5):Main - Hello Logger! This works well, and in fact CallStack and StackFrame are still the best ways to examine deeper into the call stack.  But if you only want to get information on the caller of your method, there is another option… Determining the caller at compile-time In C# 5 (.NET 4.5) they added some attributes that can be supplied to optional parameters on a method to receive caller information.  These attributes can only be applied to methods with optional parameters with explicit defaults.  Then, as the compiler determines who is calling your method with these attributes, it will fill in the values at compile-time. These are the currently supported attributes available in the  System.Runtime.CompilerServices namespace": CallerFilePathAttribute – The path and name of the file that is calling your method. CallerLineNumberAttribute – The line number in the file where your method is being called. CallerMemberName – The member that is calling your method. So let’s take a look at how our Log method would look using these attributes instead: 1: static int Log(object message, 2: [CallerMemberName] string memberName = "", 3: [CallerFilePath] string fileName = "", 4: [CallerLineNumber] int lineNumber = 0) 5: { 6: // we'll just use a simple Console write for now 7: Console.WriteLine("{0}({1}):{2} - {3}", 8: fileName, lineNumber, memberName, message); 9: } Again, calling this from our sample Main would give us the same result: 1: c:\projects\test\CallerInfo\CallerInfo.cs(5):Main - Hello Logger! However, though this seems the same, there are a few key differences. First of all, there are only 3 supported attributes (at this time) that give you the file path, line number, and calling member.  Thus, it does not give you as rich of detail as a StackFrame (which can give you the calling type as well and deeper frames, for example).  Also, these are supported through optional parameters, which means we could call our new Log method like this: 1: // They're defaults, why not fill 'em in 2: Log("My message.", "Some member", "Some file", -13); In addition, since these attributes require optional parameters, they cannot be used in properties, only in methods. These caveats aside, they do let you get similar information inside of methods at a much greater speed!  How much greater?  Well lets crank through 1,000,000 iterations of each.  instead of logging to console, I’ll return the formatted string length of each.  Doing this, we get: 1: Time for 1,000,000 iterations with StackTrace: 5096 ms 2: Time for 1,000,000 iterations with Attributes: 196 ms So you see, using the attributes is much, much faster!  Nearly 25x faster in fact.  Summary There are a few ways to get caller information for a method.  The StackFrame allows you to get a comprehensive set of information spanning the whole call stack, but at a heavier cost.  On the other hand, the attributes allow you to quickly get at caller information baked in at compile-time, but to do so you need to create optional parameters in your methods to support it. Technorati Tags: Little Wonders,CSharp,C#,.NET,StackFrame,CallStack,CallerFilePathAttribute,CallerLineNumberAttribute,CallerMemberName

  Read the article

• Node Serialization in NetBeans Platform 7.0

  - by Geertjan

  Node serialization makes sense when you're not interested in the data (since that should be serialized to a database), but in the state of the application. For example, when the application restarts, you want the last selected node to automatically be selected again. That's not the kind of information you'll want to store in a database, hence node serialization is not about data serialization but about application state serialization. I've written about this topic in October 2008, here and here, but want to show how to do this again, using NetBeans Platform 7.0. Somewhere I remember reading that this can't be done anymore and that's typically the best motivation for me, i.e., to prove that it can be done after all. Anyway, in a standard POJO/Node/BeanTreeView scenario, do the following: Remove the "@ConvertAsProperties" annotation at the top of the class, which you'll find there if you used the Window Component wizard. We're not going to use property-file based serialization, but plain old java.io.Serializable  instead. In the TopComponent, assuming it is named "UserExplorerTopComponent", typically at the end of the file, add the following: @Override public Object writeReplace() { //We want to work with one selected item only //and thanks to BeanTreeView.setSelectionMode, //only one node can be selected anyway: Handle handle = NodeOp.toHandles(em.getSelectedNodes())[0]; return new ResolvableHelper(handle); } public final static class ResolvableHelper implements Serializable { private static final long serialVersionUID = 1L; public Handle selectedHandle; private ResolvableHelper(Handle selectedHandle) { this.selectedHandle = selectedHandle; } public Object readResolve() { WindowManager.getDefault().invokeWhenUIReady(new Runnable() { @Override public void run() { try { //Get the TopComponent: UserExplorerTopComponent tc = (UserExplorerTopComponent) WindowManager.getDefault().findTopComponent("UserExplorerTopComponent"); //Get the display text to search for: String selectedDisplayName = selectedHandle.getNode().getDisplayName(); //Get the root, which is the parent of the node we want: Node root = tc.getExplorerManager().getRootContext(); //Find the node, by passing in the root with the display text: Node selectedNode = NodeOp.findPath(root, new String[]{selectedDisplayName}); //Set the explorer manager's selected node: tc.getExplorerManager().setSelectedNodes(new Node[]{selectedNode}); } catch (PropertyVetoException ex) { Exceptions.printStackTrace(ex); } catch (IOException ex) { Exceptions.printStackTrace(ex); } } }); return null; } } Assuming you have a node named "UserNode" for a type named "User" containing a property named "type", add the bits in bold below to your "UserNode": public class UserNode extends AbstractNode implements Serializable { static final long serialVersionUID = 1L; public UserNode(User key) { super(Children.LEAF); setName(key.getType()); } @Override public Handle getHandle() { return new CustomHandle(this, getName()); } public class CustomHandle implements Node.Handle { static final long serialVersionUID = 1L; private AbstractNode node = null; private final String searchString; public CustomHandle(AbstractNode node, String searchString) { this.node = node; this.searchString = searchString; } @Override public Node getNode() { node.setName(searchString); return node; } } } Run the application and select one of the user nodes. Close the application. Start it up again. The user node is not automatically selected, in fact, the window does not open, and you will see this in the output: Caused: java.io.InvalidClassException: org.serialization.sample.UserNode; no valid constructor Read this article and then you'll understand the need for this class: public class BaseNode extends AbstractNode { public BaseNode() { super(Children.LEAF); } public BaseNode(Children kids) { super(kids); } public BaseNode(Children kids, Lookup lkp) { super(kids, lkp); } } Now, instead of extending AbstractNode in your UserNode, extend BaseNode. Then the first non-serializable superclass of the UserNode has an explicitly declared no-args constructor, Do the same as the above for each node in the hierarchy that needs to be serialized. If you have multiple nodes needing serialization, you can share the "CustomHandle" inner class above between all the other nodes, while all the other nodes will also need to extend BaseNode (or provide their own non-serializable super class that explicitly declares a no-args constructor). Now, when I run the application, I select a node, then I close the application, restart it, and the previously selected node is automatically selected when the application has restarted.

  Read the article

• The Enterprise is a Curmudgeon

  - by John K. Hines

  Working in an enterprise environment is a unique challenge.  There's a lot more to software development than developing software.  A project lead or Scrum Master has to manage personalities and intra-team politics, has to manage accomplishing the task at hand while creating the opportunities and a reputation for handling desirable future work, has to create a competent, happy team that actually delivers while being careful not to burn bridges or hurt feelings outside the team.  Which makes me feel surprised to read advice like: " The enterprise should figure out what is likely to work best for itself and try to use it." - Ken Schwaber, The Enterprise and Scrum. The enterprises I have experience with are fundamentally unable to be self-reflective.  It's like asking a Roman gladiator if he'd like to carve out a little space in the arena for some silent meditation.  I'm currently wondering how compatible Scrum is with the top-down hierarchy of life in a large organization.  Specifically, manufacturing-mindset, fixed-release, harmony-valuing large organizations.  Now I understand why Agile can be a better fit for companies without much organizational inertia. Recently I've talked with nearly two dozen software professionals and their managers about Scrum and Agile.  I've become convinced that a developer, team, organization, or enterprise can be Agile without using Scrum.  But I'm not sure about what process would be the best fit, in general, for an enterprise that wants to become Agile.  It's possible I should read more than just the introduction to Ken's book. I do feel prepared to answer some of the questions I had asked in a previous post: How can Agile practices (including but not limited to Scrum) be adopted in situations where the highest-placed managers in a company demand software within extremely aggressive deadlines? Answer: In a very limited capacity at the individual level.  The situation here is that the senior management of this company values any software release more than it values developer well-being, end-user experience, or software quality.  Only if the developing organization is given an immediate refactoring opportunity does this sort of development make sense to a person who values sustainable software.   How can Agile practices be adopted by teams that do not perform a continuous cycle of new development, such as those whose sole purpose is to reproduce and debug customer issues? Answer: It depends.  For Scrum in particular, I don't believe Scrum is meant to manage unpredictable work.  While you can easily adopt XP practices for bug fixing, the project-management aspects of Scrum require some predictability.  My question here was meant toward those who want to apply Scrum to non-development teams.  In some cases it works, in others it does not. How can a team measure if its development efforts are both Agile and employ sound engineering practices? Answer: I'm currently leaning toward measuring these independently.  The Agile Principles are a terrific way to measure if a software team is agile.  Sound engineering practices are those practices which help developers meet the principles.  I think Scrum is being mistakenly applied as an engineering practice when it is essentially a project management practice.  In my opinion, XP and Lean are examples of good engineering practices. How can Agile be explained in an accurate way that describes its benefits to sceptical developers and/or revenue-focused non-developers? Answer: Agile techniques will result in higher-quality, lower-cost software development.  This comes primarily from finding defects earlier in the development cycle.  If there are individual developers who do not want to collaborate, write unit tests, or refactor, then these are simply developers who are either working in an area where adding these techniques will not add value (i.e. they are an expert) or they are a developer who is satisfied with the status quo.  In the first case they should be left alone.  In the second case, the results of Agile should be demonstrated by other developers who are willing to receive recognition for their efforts.  It all comes down to individuals, doesn't it?  If you're working in an organization whose Agile adoption consists exclusively of Scrum, consider ways to form individual Agile teams to demonstrate its benefits.  These can even be virtual teams that span people across org-chart boundaries.  Once you can measure real value, whether it's Scrum, Lean, or something else, people will follow.  Even the curmudgeons.

  Read the article

< Previous Page | 617 618 619 620 621 622 623 624 625 626 627 628  | Next Page >