Search Results

Search found 25440 results on 1018 pages for 'agent based modeling'.

Page 625/1018 | < Previous Page | 621 622 623 624 625 626 627 628 629 630 631 632  | Next Page >

• Why doesn't wireless work on Wubi 12.04 with a Broadcom BCM4312 card?

  - by Kristin

  I have recently set up ubuntu 12.04 on my laptop using the Wubi installer. I am having a very difficult time setting up a wireless internet connection. I am currently set up with an ethernet connection which I have used to download all new updates and to activate the Broadcom STA wireless driver. I have tried several things in the terminal based on other people's posts: ~$ rfkill list 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes ~$ rfkill unblock all It doesn't change anything. I also tried rebooting and connecting to the internet on my Windows Vista OS, and it worked, so I know that the connection should not be hard blocked. I have also tried installing b43 firmware (lp/phy version) that is supposed to work with my chip (BCM4312). It seems to have no effect. Then I tried: ~$ iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. This is my first time trying to work with ubuntu, so I would appreciate any help. Thanks. Also sorry this is poorly formatted. I'm having troubles with that too.

  Read the article

• What is an efficient algorithm for randomly assigning a pool of objects to a parent using specific rules

  - by maple_shaft

  I need some expert answers to help me determine the most efficient algorithm in this scenario. Consider the following data structures: type B { A parent; } type A { set<B> children; integer minimumChildrenAllowed; integer maximumChildrenAllowed; } I have a situation where I need to fetch all the orphan children (there could be hundreds of thousands of these) and assign them RANDOMLY to A type parents based on the following rules. At the end of the job, there should be no orphans left At the end of the job, no object A should have less children than its predesignated minimum. At the end of the job, no object A should have more children than its predesignated maximum. If we run out of A objects then we should create a new A with default values for minimum and maximum and assign remaining orphans to these objects. The distribution of children should be as evenly distributed as possible. There may already be some children assigned to A before the job starts. I was toying with how to do this but I am afraid that I would just end up looping across the parents sorted from smallest to largest, and then grab an orphan for each parent. I was wondering if there is a more efficient way to handle this?

  Read the article

• No Need to Disable Java, Update Instead

  - by Tori Wieldt

  Oracle has just released Security Alert CVE-2012-4681 to address 3 distinct but related vulnerabilities and one security-in-depth issue affecting Java running in desktop browsers.  These vulnerabilities are: CVE-2012-4681, CVE-2012-1682, CVE-2012-3136, and CVE-2012-0547.  These vulnerabilities are not applicable to standalone Java desktop applications or Java running on servers, i.e. these vulnerabilities do not affect any Oracle server based software. Due to the severity of these vulnerabilities, the public disclosure of technical details and the reported exploitation of CVE-2012-4681 "in the wild," Oracle strongly recommends that customers apply the updates provided by this Security Alert as soon as possible.  Developers should download the latest release at http://www.oracle.com/technetwork/java/javase/downloads/index.html   Java users should download the latest release of JRE at http://java.com Windows users can take advantage of the Java Automatic Update to get the latest release JUG leader John Yeary tweeted "I want to take a moment to THANK #Oracle for doing the right thing. Too often people don't say thanks enough when they get it right." Thanks for your thanks.  For More Information Oracle Security Alert for CVE-2012-4681 Change to Java SE 7 and Java SE 6 Update Release Numbers

  Read the article

• Enterprise Level Monitoring Solution

  - by Garthmeister J.

  My company is currently looking to replace our current solution used for monitoring our web-based enterprise solutions for both up-time and performance. Please note this is not intended to be a network monitoring-type solution (internally we currently use Nagios). If anyone has a provider that they have had a positive experience with, it would be much appreciated. Here is a list of our requirements: • Must have a large number of probes/agents around the globe to be representative of our customer base • Must have a flexible scripting capability to automate multi-step user actions • 24 hour a day monitoring • Flexible alerting system • Report generation capability • Mimic browser specific monitoring (optional, not a must-have)

  Read the article

• Oracle Linux Partner Pavilion Spotlight III

  - by Ted Davis

  Three days until Oracle OpenWorld 2012 begins. The anticipation and excitement are building. In today's spotlight we are presenting an additional three partners exhibiting in the Oracle Linux Partner Pavilion at Oracle OpenWorld ( Booth #1033). Fujitsu will showcase a Gold tower system representing the one-millionth PRIMERGY server shipped, highlighting Fujitsu’s position as the #4 server vendor worldwide. Fujitsu’s broad range of server platforms is reshaping the data center with virtualization and cloud services, including those based on Oracle Linux and Oracle VM. BeyondTrust, the leader in providing context aware security intelligence, will be showcasing its threat management and policy enablement solutions for addressing IT security risks and simplifying compliance. BeyondTrust will discuss how to reduce security risks, close security gaps and improve visibility across your server and database infrastructure. Please stop by to see live demonstrations of BeyondTrust’s award winning vulnerability management and privilege identity management solutions supported on Oracle Linux. Virtualized infrastructure with Oracle VM and NetApp storage and data management solutions provides an integrated and seamless end user experience. Designed for maximum efficiency to allow for native NetApp deduplication and backup/recovery/cloning of VM’s or templates. Whether you are provisioning one or multiple server pools or dynamically re-provisioning storage for your virtual machines to meet business demands, with Oracle and NetApp, you have one single point-and-click console to rapidly and easily deploy a virtualized agile data infrastructure in minutes. So there you have it!  The third install of our Partner Spolight. Check out Part I and Part II of our Partner Spotlights from previous days if you've missed them. Remember to visit the Oracle Linux team at Oracle OpenWorld.

  Read the article

• TYPO3 unable to log in

  - by Agata

  Hi, My company prepared a new website based on typo3 (don't know the version but they started to prepare it in October 2011 so it's probably from that time. A couple of days ago I got my user name and password but I'm unable to log in (Itried withIE, Firefox and Chrome). Each time I try typo3 behaves like I'd be entering wrong user name orpassword (for sure I'm entering the right one, I also tried other user's data it ended up the same way). I use Windows 7 and Kaspersky Internet Security 9.0.0.736 - might their settings block typo3? I really don't know what to do and can't obtain help from the IT department (in head office in another country)... Thank you for any suggestions in advance.

  Read the article

• How Do I Parse a String?

  - by Russ

  I am new to bash, and I am creating a script that loops through the files in a directory and based on part of the filename, does something with the file, so far I have this: #!/bin/bash DIR="/Users/me/Documents/import/*" for f in "$DIR" do $t=?????? echo "Loading $f int $t..." done so $f will output something like this: /Users/me/Documents/import/time_dim-1272037430173 out of this, I want time_dim, the directory can be variable length and -1272037430173 is a fixed length (it's the unix timestamp btw). What is the best way to go about this?

  Read the article

• How many nginx/fastcgi processes do you use?

  - by qliq

  I have a drupal-based website on a VPS with 1GB RAM and 1Ghz processor share. The webserver is nginx along with php-fastcgi. Currently I am using 10 nginx and 13 php-fastcgi processes. The server load is high most of the times while half of the RAM is unused. The CPU usage rarely reaches 80%. I have tried some other combinations of nginx/php-fastcgi but am not sure what is the optimal combination because I am quite ignorant about what's going on below the surface. So I appreciate if you could share your experience or give me some clues.

  Read the article

• ADF Hands on Training &ndash; Prerequisites for 22nd March 2011

  - by Grant Ronald

  For those of you coming to the ADF Hands on training on the 22nd March in London, there was a link to the prerequisites.  Unfortunately, in a reshuffle of content on OTN, this page was removed.  So, over the next day or so I’m hoping to the pull together the relevant information into this blog post.  So keep checking back! Firstly, you need to being your laptop with you to do the hands on exercises.  No laptop, no hands on. Recommended 2GB RAM running Microsoft Windows XP SP2, 2003 Server SP2, Vista (32 bit only), Windows 7 or Linux or Mac 2GHz Processor (less will be acceptable but slower) Mozilla Firefox 2.0 or higher, Internet Explorer 7 or higher, Safari 3.0 and higher, Google Chrome 1.0 or higher Winzip or other extracting software Adobe Acrobat reader Flash (if you want to see dynamic graphs in your application) As for software, you will need have installed JDeveloper 11g.  The hands on instructions are based on 11.1.1.2 (or is it 11.1.1.3)! anyway, either of those or 11.1.1.4 would be required. You also need an Oracle database on your machine and access to the HR schema (which should be unlocked).  Don’t expect to have access to a network and VPN to a database. A simple test, unplug your laptop from your corporate network, run up JDev  and select File –> New –> Database connection and make sure you can connect to HR database and see the Emp/Dept etc tables.  If you can do that, you should be good to go. I would strongly recommend ensuring you have this in place before you arrive on Tuesday. Look forward to seeing you there.

  Read the article

• Need to include Calendar and Email in own CRM system. Whose?

  - by PurplePilot

  I am writing a web based application that needs to have some elements of CRM in it but I cannot use an of-the-shelf CRM to do what I want. (Honestly we have been through it all and it will not work). Now while Tasks, Calls, Meetings and Notes are straightforward the idea of reinventing Mail and Calendars seems a waste of time and effort and also unproductive as most users already have their own and it simply adds to the complexity of my application and hacks users off. My thoughts are going around using Outlook and or GMail/iCal and or Mac Mail/iCal and or Thunderbird and importing the relevant data or if possible integrating it into the application. Any thoughts? Anyone got any experience of this can point me in a few directions. N.B. Not looking for an answer as too complex just some pointers and thoughts. Thanks. p.s. We did look at Sugar CRM as the basis for our project and it is useful to get best practice from but as I say it was not useable due to how we are structuring our software, not Sugar's fault.

  Read the article

• Is it safe/wise to run Drupal alongside bespoke business web apps in production?

  - by Vaze

  I'm interested to know the general community feeling about the safety of running Drupal alongside bespoke, business critial ASP.NET MVC apps on a production server. Previously my employer's Drupal based 'visitor website' was hosted as a managed service with a 3rd party. While the LoB sites were hosted in-house. That 3rd party is no longer available so I'm considering my options: Bring Drupal in-house Find another 3rd party My concern is that I have little experience with Drupal administration (and no experience securing it) and that the addition of PHP to my IIS server poses a security risk. Is there a best practice that I can follow in this situation?

  Read the article

• Using systeminfo to get the OS Name

  - by WileCau

  I need to find the flavor of Windows that is running using a batch file that will run on anything from Windows NT to Windows 7. I'm using a method based on this page with some minor changes. Systeminfo gives the flavor of Windows that is running. Is there any authoritative list of names that can be returned? If so where would I find the list? My intention is to do something like: winVer=Unknown rem NT doesn't have systeminfo ver | find "Windows NT" > nul if %errorlevel%==0 set winVer=WinNT for /f "delims=: tokens=2" %%v in ('sysinfo ^| find "OS Name"') do ( set verStr=%%v ) echo %verStr% | find "Windows XP" > nul if %errorlevel%==0 set winVer=WinXP echo %verStr% | find "Windows Vista" > nul if %errorlevel%==0 set winVer=WinVista ... etc Thanks

  Read the article

• "Access is denied" when copying text file to printer UNC path

  - by Patrick

  We have a new server running Server 2008 R2. We also have a "DOS-based" program that prints directly to the UNC path of a print share. With the new server, we are unable to print from this program. According to support, the program's printing works in the same way as if we were to do a "copy mytextfile.txt \\myserver\myprinter". When we try to run this command in DOS, we get "Access is denied". Support is saying that this is why the DOS program is not able to print. I have tried granting all permissions on the printer to the appropriate users (under Security of the printer properties) but that did not work. Is there a policy setting that would cause this to be denied?

  Read the article

• Doing "text mode 'splash' game" during boot.

  - by Vi

  Sometimes I want to do something (for example, playing a simple text-mode game) while the system is booting up. This is especially useful when lengthy reiserfs transaction replays are happening. Current hacky way of doing it is: Put the program on initramfs. Before running /sbin/init, "openvt 2 /my/program". Turn off messages from kernel (sysrq 0) Override /dev/console with /dev/null (to prevent boot messages). The problems are: There are STILL some messages interfering with program output. I can't see boot messages by switching to that virtual terminal back. After finishing the boot sequence, /dev/tty2 ends up being attached both to getty and my program. How to do it properly without of running graphical splashes? The system is Linux Debian Squeeze, no dependency based sysv scripts.

  Read the article

• Is it possible to share Skype's profile across OSs?

  - by Mihail

  in my machine I have two Windows OSs plus a Linux based one and I have Skype in them all. I don't mind Linux because there software is already different, but I wanted to sync my profile between both Windows so that I have access to all the conversiations and settings independently of which I'm using. So I created a directory junction of %AppData%\Skype\username but when I change OS when I start Skype I get a message telling me that the password was wrong and I have to input it again. This works until I change to the other where I get the same message. Is it possible to share Skype's profile across OSs? If so, how?

  Read the article

• Is it possible to make a (Windows 7) executable automatically run when I put in my thumb drive?

  - by iconoclast

  I have portable apps on a thumbdrive, and want to automatically run the "menu" app (E:\Applications\Windows\Start.exe) when I insert that drive. I realize (or think I realize, based on a foggy memory of trying to find a way to do this some time ago) that it can no longer be done with the old autorun approach, at least not in Windows 7. But there must be some other way: maybe a daemon process that waits for the thumbdrive to be inserted, and then fires up the .exe file? Maybe a daemon that tries every five minutes or so to launch the menu, and doesn't make a fuss when it's not there. Maybe something else? How can I achieve this?

  Read the article

• How to backup old emails locally in Thunderbird and then remove them from IMAP server?

  - by saicode

  I am using Godaddy IMAP email with Thunderbird as my desktop client on Windows 7. The email service has unlimited mailbox size but the local Thunderbird is having troubles due to the large size of the inbox/outbox. I would like to take out old emails from IMAP server and backup them locally. After backing up the old email I would like to delete old email (older than let's say, 2012) from the server. Also I'd like to have them accessible from the local backup if ever needed in the future. This way I might be able to make Thunderbird fast and problem free. Problem is, I am not able to find any instruction to do this in an automated way based on dates etc. I can find some links for Archiving, Compacting and Backup. But unable to find any tutorial about how to backup and archive it locally and delete the original emails from the server.

  Read the article

• Why using Fragments?

  - by ahmed_khan_89

  I have read the documentation and some other questions' threads about this topic and I don't really feel convinced; I don't see clearly the limits of use of this technique. Fragments are now seen as a Best Practice; every Activity should be basically a support for one or more Fragments and not call a layout directly. Fragments are created in order to: allow the Activity to use many fragments, to change between them, to reuse these units... == the Fragment is totally dependent to the Context of an activity , so if I need something generic that I can reuse and handle in many Activities, I can create my own custom layouts or Views ... I will not care about this additional Complexity Developing Layer that fragments would add. a better handling to different resolution == OK for tablets/phones in case of long process that we can show two (or more) fragments in the same Activity in Tablets, and one by one in phones. But why would I use fragments always ? handling callbacks to navigate between Fragments (i.e: if the user is Logged-in I show a fragment else I show another fragment). === Just try to see how many bugs facebook SDK Log-in have because of this, to understand that it is really (?) ... considering that an Android Application is based on Activities... Adding another life cycles in the Activity would be better to design an Application... I mean the modules, the scenarios, the data management and the connectivity would be better designed, in that way. === This is an answer of someone who's used to see the Android SDK and Android Framework with a Fragments vision. I don't think it's wrong, but I am not sure it will give good results... And it is really abstract... ==== Why would I complicate my life, coding more, in using them always? else, why is it a best practice if it's just a tool for some cases? what are these cases?

  Read the article

• Where can I store driver files so that Windows sees them when it 'searches automatically' for them?

  - by qroberts

  I am in the process of creating a few generic images and I have downloaded all the drivers for all the models of machines we use here. I can extract these drivers to any location but I am not sure where Windows looks when it is searching for drivers. Is there a driver store somewhere in Windows that it searches through? These images will be created for: Windows XP, Windows 7 x86/x64 Are the locations different between Windows XP and Windows 7? Are they different if the OS is x64 based? I know Windows likes to differentiate 32/64bit software all over the place, not sure if they do the same with driver stores.

  Read the article

• Encrypting absolutely everything, even within the LAN

  - by chris_l

  Has anybody tried that approach already? I'm really considering it: Instead of relying on network based IDS etc., every packet must use encryption which was initiated by a certificate issued by my own CA. Every client gets a unique client certificate Every server gets a unique server certificate Every service additionally requires to login. Both SSL and SSH would be ok. Access to the internet would be done via an SSL tunnel to the gateway. Is it feasible? Does it create practical problems? How could it be done and enforced? What do you think?

  Read the article

• Website only displays correctly in IE using compatibility mode?

  - by user21318

  As the resident "IT Whiz" at work (ie: I know how to use a computer) I've been asked to develop a website for our small business. I've altered a wordpress theme for the time being and the company is very happy with the results. The only problem I am having with it at the moment is that for some reason the website does not display correctly and Internet Explorer unless I run it in Compatibility Mode. The main problem that I have is that my menu "slider" (it rotates pictures with links to articles etc) does not display at all, neither does the top menu they are just blink text based links. Even with Compatibility Mode enabled the slider and menus come back but the page is not centered unlike on both Firefox and Chrome. My googling has suggested the most common cause of this is old code but I'm not sure where to be looking. Is it likely in the css file or the actual php? Also any ideas on how to trouble shoot the cause of this? As in is there some dev tools or debugger I can use that would highlight "broken" code for me?

  Read the article

• How to select a user and remove all groups they are a member of using Powershell (with Quest)?

  - by Don

  I've read quite a bit online about this and thought I had found a solution, but it doesn't seem to be working like I would expect. I am wanting to get a user based on the username I input, then remove all groups that it is a member of. Basically the same thing as going into ADUC, selecting the user, selecting the Member Of tab, highlighting everything (except domain users of course) and selecting remove. Here's the command I'm trying to use: Get-QADUser -Name $username | Remove-QADMemberOf -RemoveAll Others have said online that it works for them, but so far it hasn't for me. It doesn't give an error, it accepts the command just fine, but when I look in ADUC, the groups are still there for the user. Any suggestions as to what I may be doing wrong? Executing from Windows 7 with domain admin rights, Exchange cmdlets and Quest snapin loaded. Thanks!

  Read the article

• Enable [command] key to register as something other than just [ctrl]?

  - by gojomo

  I'm running 10.04LTS inside VMWare Fusion on a Mac. The [command] key (aka [windows] on many keyboards) is almost always behaving as if it was [ctrl], even though I done anything explicit to request that behavior. In fact, in SystemPreferencesKeyboardLayoutsOptionsAlt/Win key behavior, 'default' is chosen (rather than the 'Control is mapped to Win keys' option). However, choosing other options there do not seem to change the handling of [command], at least not as tested in the SystemPreferenceKeyboard Shortcuts app. (No matter what I've tried, [command]-x is always detected as [Ctrl]-x in that app.) I've tried: various options under SystemPreferencesKeyboardLayoutsOptionsAlt/Win key behavior toggling the VMWare Fusion Preferences KKeyboard & Mouse Key Mappings setup which claims to map '[command]' to '[windows]', and restarting the VM in each position the xmodmap lines suggested at https://help.ubuntu.com/community/MappingWindowsKey And yet, it's clear that all Ubuntu apps aren't merging [ctrl] and [command], because in 'Terminal', [shift]-[ctrl]-c will Copy, but [shift]-[command]-c will not. If the [command]/[windows] key was recognized as anything else ('Super', 'Meta', 'Hyper'? I don't care as long as it's not 'Control'), then I could achieve my real goal (which happens to be enabling CMD-based cut/copy/paste in PyCharm, while leaving CTRL-X/etc available for emacs-like bindings). I think any solution which manages to make [command]-x appear as something other than [ctrl]-x in PreferencesKeyboard Shortcuts will probably do the trick.

  Read the article

• Linux/Solaris replace hostnames in files according to hostname rule

  - by yael

  According to the following Perl command ( this command part of ksh script ) I can replaced old hostnames with new hostnames in Linux or Solaris previos_machine_name=linux1a new_machine_name=Red_Hat_linux1a export previos_machine_name export new_machine_name . perl -i -pe 'next if /^ *#/; s/(\b|[[:^alnum:]])$ENV{previos_machine_name}(\b|[[:^alnum:]])/$1$ENV{new_machine_name}$2/g' file EXPLAIN: according to perl command - we not replaces hostnames on the follwoing case: RULE: [NUMBERS]||[letter]HOSTNAME[NUMBERS]||[letter] my question after I used the Perl command in order to replace all old hostnames with new hostnames based on the "RULE" in the Perl command how to verify that the old hostnames not exist in file ? for example previos_machine_name=linux1a new_machine_name=Red_Hat_linux1a more file AAARed_Hat_linux1a verification should be ignore from this line @Red_Hat_linux1a$ verification should be match this line P=Red_Hat_linux1a verification should be match this line XXXRed_Hat_linux1aZZZ verification should be ignore from this line . . . .

  Read the article

• How to secure a VM while allowing customer RDS (or equivalent) access to its desktop

  - by ChrisA

  We have a Windows Client/(SQL-)Server application which is normally installed at the customer's premises. We now need to provide a hosted solution, and browser-based isn't feasible in the short term. We're considering hosting the database ourselves, and also hosting the client in a VM. We can set all this up easily enough, so we need to: ensure that the customer can connect easily, and also ensure that we suitably restrict access to the VM (and its host, of course) We already access the host and guest machines across the internet via RDS, but we restrict access to it to only our own internal, very small, set of static IPs, and of course theres the 2 (or 3?)-user limit on RDS connections to a remote server. So I'd greatly appreciate ideas on how to manage: the security the multi-user aspect. We're hoping to be able to do this initially without a large investment in virtualisation infrastructure - it would be one customer only to start with, with perhaps two remote users. Thanks!

  Read the article

< Previous Page | 621 622 623 624 625 626 627 628 629 630 631 632  | Next Page >