Search Results

Search found 73059 results on 2923 pages for 'system string'.

Page 63/2923 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

• Getting input in system() function (Mac)

  - by Alex

  #include <iostream> using namespace std; int main() { short int enterVal; cout << "enter a number to say: " << endl; cin >> enterVal; system("say "%d"") << enterVal; return 0; } Is what I am currently trying. I want the user to enter a number and the system() function says it basically. The code above has an error which says " 'd' was not declared in this scope ". Thanks in advance.

  Read the article

• String search algorithm used by string::find() c++

  - by Elorfin

  how its faster than cstring functions? is the similar source available for C?

  Read the article

• Creating an email notification system based on polling database rows

  - by Ashish Sharma

  I have to design an email notification system based on the following requirements: The email notifications would be created based on polling rows in a Mysql 5.5 DB table when they are in a particular 'Completed' state. The email notification should be sent out in no more than 5 minutes from the time the row was created in the DB table (At the time of DB table row creation the state of the row might not be 'Completed'). Once 5 minutes for the DB table row expire in reaching the 'Completed' state, separate email notification need to be sent (basically telling the user that the original email notification would be delayed) and then sending the email notification as and when the row state reaches to being 'Completed'. The rest of the system requirements are : Adding relevant checks to monitor the whole system via MBeans interface. The system should be scalable so that if the rate of DB table rows creation increases so does the Email notification system be able to ramp up. So I request suggestions on following lines: What approach should I take in solving the problem described from a programming/Design pattern point of view? Suggestion for any third party plugin/software that can be used to solve the problem described? Points to take care regarding scalability and monitoring the health of the system? Java is the language of preference but I am open to using off the shelf components that can be interfaced with Java language or provide standard ports for communication. Currently I do have an in house grown system (written in Java) that is catering to the specified requirements, but it's now crumbling under increased load and now I want to give the problem a fresh look. thanks in advance Ashish

  Read the article

• Bootloader error Ubuntu 12.04, system goes to Grub-rescue instead of booting

  - by user83508

  I am trying to install ubuntu 12.04 on my system but it is constantly giving me bootloader install fail error. I have tried to lot to solve this issue but reading articles over the internet but still no gain. Firstly since the bootloader was not getting installed I tried to install it on all the alternative paths given in the installer, failing with I selected install ubuntu without bootloader. Then I tried to manually install bootloader via terminal at try ubuntu via grub-install, but I was not able to do that. Then I tried using boot-repair and it was also not able to install the bootloader because after it my system shows grub-rescue. I tried to use boot-repair and install bootloader on a seperate partition mounted to /boot and still my system is booting and it still shows grub-rescue. The error which my system shows during boot is: Error : no such device : 04ac0510-bd4f-43b8-b885-b885-11c4dec21db8 I am not dual booting and ubuntu is the only OS I am installing. I am using Raid 0 with two blue western digital hard drive so I am not sure whether it is right or not. The details given by boot-repair are in the below mentioned link; http://paste.ubuntu.com/1147208/ Afterwards, I made one more change I installed ubuntu again and this time I installed the bootloader at a different partition on /boot. After this the bootloader error has gone but I am still not able to boot to ubuntu as I get the same error I was getting before. I have not installed dmraid, I feel it is neccessary for Raid0, but I thought ubuntu already has Raid drivers. Moreover in the dmraid installation instructions for 12.04, I used the one for 10.04 and selected to install bootloader at the partitions from the dropdown. This time the installation finished normally without an error but still I am not able to boot my system as the same error shows during booting this time also. Now I am stucked and I have no clue on how I can boot my system. Please tell me how can I boot my system.

  Read the article

• System testing - making sure the system conforms to specification. Validation?

  - by user970696

  After weeks of research I have nearly completed my thesis, yet I am unable to clear up my confusion contained in all previous threads here (and in many books): During system testing, we check the system function against system analysis (functional system design) - but that would fit to a definition of verification according to many books. But I follow ISO12207, which considers all testing as validation (making sure work product meets requirement for intended use). How can I justify that unit testing or system testing is validation, even though when I check it against specification? Which fullfils the definiton of verification? When testing that e.g. "Save button" works, is it validation? This picture shows my understanding of V&V, so different from many other sources, including ISTQB etc. Essential problem I have is that a book using the same picture also states on another place that: test activities in the area of validation are usability, alpha and beta testing. For verification, testable system requirements are defined whose correct implementation can be tested through system tests. Isn't that the opposite of what the picture says? Most books present the following picture, where validation is just making sure that customer needs are satisfied. Mind you that according to ISO, validation activity is testing.

  Read the article

• DataContractSerializer truncated string when used with MemoryStream,but works with StringWriter

  - by Michael Freidgeim

  We've used the following DataContractSerializeToXml method for a long time, but recently noticed, that it doesn't return full XML for a long object, but  truncated it and returns XML string with the length of  multiple-of-1024 , but the reminder is not included. internal static string DataContractSerializeToXml<T>(T obj) { string strXml = ""; Type type= obj.GetType();//typeof(T) DataContractSerializer serializer = new DataContractSerializer(type); System.IO.MemoryStream aMemStr = new System.IO.MemoryStream(); System.Xml.XmlTextWriter writer = new System.Xml.XmlTextWriter(aMemStr, null); serializer.WriteObject(writer, obj); strXml = System.Text.Encoding.UTF8.GetString(aMemStr.ToArray()); return strXml; }   I tried to debug and searched Google for similar problems, but didn't find explanation of the error. The most closed http://forums.codeguru.com/showthread.php?309479-MemoryStream-allocates-size-multiple-of-1024-( talking about incorrect length, but not about truncated string.fortunately replacing MemoryStream to StringWriter according to http://billrob.com/archive/2010/02/09/datacontractserializer-converting-objects-to-xml-string.aspxfixed the issue.   1: var serializer = new DataContractSerializer(tempData.GetType());   2: using (var backing = new System.IO.StringWriter())   3: using (var writer = new System.Xml.XmlTextWriter(backing))   4: {   5:     serializer.WriteObject(writer, tempData);   6:     data.XmlData = backing.ToString();   7: }v

  Read the article

• Web migration of a VB6 system with VWG

  - by Webgui

  Brinks Bolivia eSAC System (Customer Service) allows to register all different kinds of contacts for a customer; addition to maintaining an updated status of each service or customer request, to have accurate information and perform the appropriate procedures for all applications. The system was originally developed in VB6 and since web access was essential it was offered via Citrix. Since the application's performance was a critical issue as well as the need to offer the system without specific installations the company looked for a solution that would solve those drawbacks of using Citrix. Searching for a solution that would allow it to offer the eSAC system over the web without the need for specific client installations and provide sufficient performance levels even when there is limited bandwidth lead Brinks to a decision to migrate their VB6 Customer Service system to to Visual WebGui. "Developing on Visual WebGui we were able to migrate the system to web environment and even add new features in less time which allows us to offer it over a standard web browser with better performance and no installations as was required with Citrix," concluded Alexander Cuellar. The full article and screenshots of the system are available here.

  Read the article

• Can't start system due to mdadm failing

  - by user101212

  I used to have a 5-disk RAID5 partition, all working very well. I have then decided to add 3 more disks on it, totaling 8 equal disks. I've opened Webmin and just asked to add the disks. Then I've realized the three disks had NTFS partitions, wich mdadm didn't complain, so I tried to stop the growing to remove the Windows partitions. I've tried to remove a disk using the same Webmin, but (as you might guess and call me fool...), the system became unstable. By restarting the system, I've started receiving these messages: "udev[126]: timeout: killing '/sbin/mdadm --incremental /dev/sdh1' [311]" "udev[124]: timeout: killing '/sbin/mdadm --detail --export /dev/md0' [316]" I've formated the system disk, hoping to get a system up and running. I did that with all RAID disks disconected, so everything was fine. I then reconnected the disks, wich was also ok. And finally installed mdadm using apt-get. By reboot, the system has found the mdadm intention of growing the system, so the same messages appear again. I other words: I can't even reach a command prompt to do something. Any ideas of what to do? I believe I could turn off the system, disconnect the disks and look for the mdadm.conf file. Would that be a good idead? I'm no Linux expert, so I'm really lost here.

  Read the article

• Windows 7 Not Starting and System Repair Not Loading

  - by Mark

  I have a Dell Inspiron 1545 running Windows 7 When turning on my PC I keep receiving a black screen with the option to use System Repair or Start Normally. Both options lead me to the System Repair background except no matter how long I wait the system restore options never show up. Choosing F8 and running all of the options including safe mode encounters the same result above. I tried to to use 2 system recovery disks 32x and 64x I downloaded and both lead to similiar results. When I choose System Repair running from the disk the System Repair Question asking to select a language pops ups but after this no matter how long I wait no other options appear. Next after restarting and selecting F8 (after hitting f12 and running from CD) I choose 'Run From Safe Mode with Command Prompt' I am able to run all of the options from System Restore with differing results: Startup Repair: Choosing this ends up in system repair indefinitely (left running 12 hrs) System Restore: Does Nothing. PC thinks for a second and then stops. When selecting ShutDown I see an error message stating there are no restore points. System Image Recovery: Service Cannot be started in Safe Mode Windows Memory Diagnostic: Runs test but then leads to system repair background which never loads system repair Command Prompt: chkdsk /r -Cannot Lock Current Drive...write protected. chkdsk /f -Cannot Lock Current Drive...write protected. bootcfg - Cannot open Boot.Ini file bootcfg - Ran all 3 (rebuildBcd, FixMbr and Fixboot) but PC still goes to System Repair background with no repair options popping up upon restart (without recovery CD). I'm on the verge of purchasing a boot utility disk for $50 unless there is anything else short of "take it to a computer shop" that somebody can suggest I try.

  Read the article

• JPRT: A Build & Test System

  - by kto

  DRAFT A while back I did a little blogging on a system called JPRT, the hardware used and a summary on my java.net weblog. This is an update on the JPRT system. JPRT ("JDK Putback Reliablity Testing", but ignore what the letters stand for, I change what they mean every day, just to annoy people :\^) is a build and test system for the JDK, or any source base that has been configured for JPRT. As I mentioned in the above blog, JPRT is a major modification to a system called PRT that the HotSpot VM development team has been using for many years, very successfully I might add. Keeping the source base always buildable and reliable is the first step in the 12 steps of dealing with your product quality... or was the 12 steps from Alcoholics Anonymous... oh well, anyway, it's the first of many steps. ;\^) Internally when we make changes to any part of the JDK, there are certain procedures we are required to perform prior to any putback or commit of the changes. The procedures often vary from team to team, depending on many factors, such as whether native code is changed, or if the change could impact other areas of the JDK. But a common requirement is a verification that the source base with the changes (and merged with the very latest source base) will build on many of not all 8 platforms, and a full 'from scratch' build, not an incremental build, which can hide full build problems. The testing needed varies, depending on what has been changed. Anyone that was worked on a project where multiple engineers or groups are submitting changes to a shared source base knows how disruptive a 'bad commit' can be on everyone. How many times have you heard: "So And So made a bunch of changes and now I can't build!". But multiply the number of platforms by 8, and make all the platforms old and antiquated OS versions with bizarre system setup requirements and you have a pretty complicated situation (see http://download.java.net/jdk6/docs/build/README-builds.html). We don't tolerate bad commits, but our enforcement is somewhat lacking, usually it's an 'after the fact' correction. Luckily the Source Code Management system we use (another antique called TeamWare) allows for a tree of repositories and 'bad commits' are usually isolated to a small team. Punishment to date has been pretty drastic, the Queen of Hearts in 'Alice in Wonderland' said 'Off With Their Heads', well trust me, you don't want to be the engineer doing a 'bad commit' to the JDK. With JPRT, hopefully this will become a thing of the past, not that we have had many 'bad commits' to the master source base, in general the teams doing the integrations know how important their jobs are and they rarely make 'bad commits'. So for these JDK integrators, maybe what JPRT does is keep them from chewing their finger nails at night. ;\^) Over the years each of the teams have accumulated sets of machines they use for building, or they use some of the shared machines available to all of us. But the hunt for build machines is just part of the job, or has been. And although the issues with consistency of the build machines hasn't been a horrible problem, often you never know if the Solaris build machine you are using has all the right patches, or if the Linux machine has the right service pack, or if the Windows machine has it's latest updates. Hopefully the JPRT system can solve this problem. When we ship the binary JDK bits, it is SO very important that the build machines are correct, and we know how difficult it is to get them setup. Sure, if you need to debug a JDK problem that only shows up on Windows XP or Solaris 9, you'll still need to hunt down a machine, but not as a regular everyday occurance. I'm a big fan of a regular nightly build and test system, constantly verifying that a source base builds and tests out. There are many examples of automated build/tests, some that trigger on any change to the source base, some that just run every night. Some provide a protection gateway to the 'golden' source base which only gets changes that the nightly process has verified are good. The JPRT (and PRT) system is meant to guard the source base before anything is sent to it, guarding all source bases from the evil developer, well maybe 'evil' isn't the right word, I haven't met many 'evil' developers, more like 'error prone' developers. ;\^) Humm, come to think about it, I may be one from time to time. :\^{ But the point is that by spreading the build up over a set of machines, and getting the turnaround down to under an hour, it becomes realistic to completely build on all platforms and test it, on every putback. We have the technology, we can build and rebuild and rebuild, and it will be better than it was before, ha ha... Anybody remember the Six Million Dollar Man? Man, I gotta get out more often.. Anyway, now the nightly build and test can become a 'fetch the latest JPRT build bits' and start extensive testing (the testing not done by JPRT, or the platforms not tested by JPRT). Is it Open Source? No, not yet. Would you like to be? Let me know. Or is it more important that you have the ability to use such a system for JDK changes? So enough blabbering on about this JPRT system, tell me what you think. And let me know if you want to hear more about it or not. Stay tuned for the next episode, same Bloody Bat time, same Bloody Bat channel. ;\^) -kto

  Read the article

• How can I see the system and contents files for the Ipad?

  - by ahmed

  Hello I want to see the system files for the Apple ipad in my computer but the problem is when I plug the Ipad to my windows 7 PC the windows open the Ipad as a storage which has only some wallpapers - i cant see any system files - my question is how can I see the system and contents files for the Ipad? because I want to do some modification on the system files to change one of the Ipad keyboards to support my language Thanks

  Read the article

• Hosting the Razor Engine for Templating in Non-Web Applications

  - by Rick Strahl

  Microsoft’s new Razor HTML Rendering Engine that is currently shipping with ASP.NET MVC previews can be used outside of ASP.NET. Razor is an alternative view engine that can be used instead of the ASP.NET Page engine that currently works with ASP.NET WebForms and MVC. It provides a simpler and more readable markup syntax and is much more light weight in terms of functionality than the full blown WebForms Page engine, focusing only on features that are more along the lines of a pure view engine (or classic ASP!) with focus on expression and code rendering rather than a complex control/object model. Like the Page engine though, the parser understands .NET code syntax which can be embedded into templates, and behind the scenes the engine compiles markup and script code into an executing piece of .NET code in an assembly. Although it ships as part of the ASP.NET MVC and WebMatrix the Razor Engine itself is not directly dependent on ASP.NET or IIS or HTTP in any way. And although there are some markup and rendering features that are optimized for HTML based output generation, Razor is essentially a free standing template engine. And what’s really nice is that unlike the ASP.NET Runtime, Razor is fairly easy to host inside of your own non-Web applications to provide templating functionality. Templating in non-Web Applications? Yes please! So why might you host a template engine in your non-Web application? Template rendering is useful in many places and I have a number of applications that make heavy use of it. One of my applications – West Wind Html Help Builder - exclusively uses template based rendering to merge user supplied help text content into customizable and executable HTML markup templates that provide HTML output for CHM style HTML Help. This is an older product and it’s not actually using .NET at the moment – and this is one reason I’m looking at Razor for script hosting at the moment. For a few .NET applications though I’ve actually used the ASP.NET Runtime hosting to provide templating and mail merge style functionality and while that works reasonably well it’s a very heavy handed approach. It’s very resource intensive and has potential issues with versioning in various different versions of .NET. The generic implementation I created in the article above requires a lot of fix up to mimic an HTTP request in a non-HTTP environment and there are a lot of little things that have to happen to ensure that the ASP.NET runtime works properly most of it having nothing to do with the templating aspect but just satisfying ASP.NET’s requirements. The Razor Engine on the other hand is fairly light weight and completely decoupled from the ASP.NET runtime and the HTTP processing. Rather it’s a pure template engine whose sole purpose is to render text templates. Hosting this engine in your own applications can be accomplished with a reasonable amount of code (actually just a few lines with the tools I’m about to describe) and without having to fake HTTP requests. It’s also much lighter on resource usage and you can easily attach custom properties to your base template implementation to easily pass context from the parent application into templates all of which was rather complicated with ASP.NET runtime hosting. Installing the Razor Template Engine You can get Razor as part of the MVC 3 (RC and later) or Web Matrix. Both are available as downloadable components from the Web Platform Installer Version 3.0 (!important – V2 doesn’t show these components). If you already have that version of the WPI installed just fire it up. You can get the latest version of the Web Platform Installer from here: http://www.microsoft.com/web/gallery/install.aspx Once the platform Installer 3.0 is installed install either MVC 3 or ASP.NET Web Pages. Once installed you’ll find a System.Web.Razor assembly in C:\Program Files\Microsoft ASP.NET\ASP.NET Web Pages\v1.0\Assemblies\System.Web.Razor.dll which you can add as a reference to your project. Creating a Wrapper The basic Razor Hosting API is pretty simple and you can host Razor with a (large-ish) handful of lines of code. I’ll show the basics of it later in this article. However, if you want to customize the rendering and handle assembly and namespace includes for the markup as well as deal with text and file inputs as well as forcing Razor to run in a separate AppDomain so you can unload the code-generated assemblies and deal with assembly caching for re-used templates little more work is required to create something that is more easily reusable. For this reason I created a Razor Hosting wrapper project that combines a bunch of this functionality into an easy to use hosting class, a hosting factory that can load the engine in a separate AppDomain and a couple of hosting containers that provided folder based and string based caching for templates for an easily embeddable and reusable engine with easy to use syntax. If you just want the code and play with the samples and source go grab the latest code from the Subversion Repository at: http://www.west-wind.com:8080/svn/articles/trunk/RazorHosting/ or a snapshot from: http://www.west-wind.com/files/tools/RazorHosting.zip Getting Started Before I get into how hosting with Razor works, let’s take a look at how you can get up and running quickly with the wrapper classes provided. It only takes a few lines of code. The easiest way to use these Razor Hosting Wrappers is to use one of the two HostContainers provided. One is for hosting Razor scripts in a directory and rendering them as relative paths from these script files on disk. The other HostContainer serves razor scripts from string templates… Let’s start with a very simple template that displays some simple expressions, some code blocks and demonstrates rendering some data from contextual data that you pass to the template in the form of a ‘context’. Here’s a simple Razor template: @using System.Reflection Hello @Context.FirstName! Your entry was entered on: @Context.Entered @{ // Code block: Update the host Windows Form passed in through the context Context.WinForm.Text = "Hello World from Razor at " + DateTime.Now.ToString(); } AppDomain Id: @AppDomain.CurrentDomain.FriendlyName Assembly: @Assembly.GetExecutingAssembly().FullName Code based output: @{ // Write output with Response object from code string output = string.Empty; for (int i = 0; i < 10; i++) { output += i.ToString() + " "; } Response.Write(output); } Pretty easy to see what’s going on here. The only unusual thing in this code is the Context object which is an arbitrary object I’m passing from the host to the template by way of the template base class. I’m also displaying the current AppDomain and the executing Assembly name so you can see how compiling and running a template actually loads up new assemblies. Also note that as part of my context I’m passing a reference to the current Windows Form down to the template and changing the title from within the script. It’s a silly example, but it demonstrates two-way communication between host and template and back which can be very powerful. The easiest way to quickly render this template is to use the RazorEngine<TTemplateBase> class. The generic parameter specifies a template base class type that is used by Razor internally to generate the class it generates from a template. The default implementation provided in my RazorHosting wrapper is RazorTemplateBase. Here’s a simple one that renders from a string and outputs a string: var engine = new RazorEngine<RazorTemplateBase>(); // we can pass any object as context - here create a custom context var context = new CustomContext() { WinForm = this, FirstName = "Rick", Entered = DateTime.Now.AddDays(-10) }; string output = engine.RenderTemplate(this.txtSource.Text new string[] { "System.Windows.Forms.dll" }, context); if (output == null) this.txtResult.Text = "*** ERROR:\r\n" + engine.ErrorMessage; else this.txtResult.Text = output; Simple enough. This code renders a template from a string input and returns a result back as a string. It  creates a custom context and passes that to the template which can then access the Context’s properties. Note that anything passed as ‘context’ must be serializable (or MarshalByRefObject) – otherwise you get an exception when passing the reference over AppDomain boundaries (discussed later). Passing a context is optional, but is a key feature in being able to share data between the host application and the template. Note that we use the Context object to access FirstName, Entered and even the host Windows Form object which is used in the template to change the Window caption from within the script! In the code above all the work happens in the RenderTemplate method which provide a variety of overloads to read and write to and from strings, files and TextReaders/Writers. Here’s another example that renders from a file input using a TextReader: using (reader = new StreamReader("templates\\simple.csHtml", true)) { result = host.RenderTemplate(reader, new string[] { "System.Windows.Forms.dll" }, this.CustomContext); } RenderTemplate() is fairly high level and it handles loading of the runtime, compiling into an assembly and rendering of the template. If you want more control you can use the lower level methods to control each step of the way which is important for the HostContainers I’ll discuss later. Basically for those scenarios you want to separate out loading of the engine, compiling into an assembly and then rendering the template from the assembly. Why? So we can keep assemblies cached. In the code above a new assembly is created for each template rendered which is inefficient and uses up resources. Depending on the size of your templates and how often you fire them you can chew through memory very quickly. This slighter lower level approach is only a couple of extra steps: // we can pass any object as context - here create a custom context var context = new CustomContext() { WinForm = this, FirstName = "Rick", Entered = DateTime.Now.AddDays(-10) }; var engine = new RazorEngine<RazorTemplateBase>(); string assId = null; using (StringReader reader = new StringReader(this.txtSource.Text)) { assId = engine.ParseAndCompileTemplate(new string[] { "System.Windows.Forms.dll" }, reader); } string output = engine.RenderTemplateFromAssembly(assId, context); if (output == null) this.txtResult.Text = "*** ERROR:\r\n" + engine.ErrorMessage; else this.txtResult.Text = output; The difference here is that you can capture the assembly – or rather an Id to it – and potentially hold on to it to render again later assuming the template hasn’t changed. The HostContainers take advantage of this feature to cache the assemblies based on certain criteria like a filename and file time step or a string hash that if not change indicate that an assembly can be reused. Note that ParseAndCompileTemplate returns an assembly Id rather than the assembly itself. This is done so that that the assembly always stays in the host’s AppDomain and is not passed across AppDomain boundaries which would cause load failures. We’ll talk more about this in a minute but for now just realize that assemblies references are stored in a list and are accessible by this ID to allow locating and re-executing of the assembly based on that id. Reuse of the assembly avoids recompilation overhead and creation of yet another assembly that loads into the current AppDomain. You can play around with several different versions of the above code in the main sample form:   Using Hosting Containers for more Control and Caching The above examples simply render templates into assemblies each and every time they are executed. While this works and is even reasonably fast, it’s not terribly efficient. If you render templates more than once it would be nice if you could cache the generated assemblies for example to avoid re-compiling and creating of a new assembly each time. Additionally it would be nice to load template assemblies into a separate AppDomain optionally to be able to be able to unload assembli es and also to protect your host application from scripting attacks with malicious template code. Hosting containers provide also provide a wrapper around the RazorEngine<T> instance, a factory (which allows creation in separate AppDomains) and an easy way to start and stop the container ‘runtime’. The Razor Hosting samples provide two hosting containers: RazorFolderHostContainer and StringHostContainer. The folder host provides a simple runtime environment for a folder structure similar in the way that the ASP.NET runtime handles a virtual directory as it’s ‘application' root. Templates are loaded from disk in relative paths and the resulting assemblies are cached unless the template on disk is changed. The string host also caches templates based on string hashes – if the same string is passed a second time a cached version of the assembly is used. Here’s how HostContainers work. I’ll use the FolderHostContainer because it’s likely the most common way you’d use templates – from disk based templates that can be easily edited and maintained on disk. The first step is to create an instance of it and keep it around somewhere (in the example it’s attached as a property to the Form): RazorFolderHostContainer Host = new RazorFolderHostContainer(); public RazorFolderHostForm() { InitializeComponent(); // The base path for templates - templates are rendered with relative paths // based on this path. Host.TemplatePath = Path.Combine(Environment.CurrentDirectory, TemplateBaseFolder); // Add any assemblies you want reference in your templates Host.ReferencedAssemblies.Add("System.Windows.Forms.dll"); // Start up the host container Host.Start(); } Next anytime you want to render a template you can use simple code like this: private void RenderTemplate(string fileName) { // Pass the template path via the Context var relativePath = Utilities.GetRelativePath(fileName, Host.TemplatePath); if (!Host.RenderTemplate(relativePath, this.Context, Host.RenderingOutputFile)) { MessageBox.Show("Error: " + Host.ErrorMessage); return; } this.webBrowser1.Navigate("file://" + Host.RenderingOutputFile); } You can also render the output to a string instead of to a file: string result = Host.RenderTemplateToString(relativePath,context); Finally if you want to release the engine and shut down the hosting AppDomain you can simply do: Host.Stop(); Stopping the AppDomain and restarting it (ie. calling Stop(); followed by Start()) is also a nice way to release all resources in the AppDomain. The FolderBased domain also supports partial Rendering based on root path based relative paths with the same caching characteristics as the main templates. From within a template you can call out to a partial like this: @RenderPartial(@"partials\PartialRendering.cshtml", Context) where partials\PartialRendering.cshtml is a relative to the template root folder. The folder host example lets you load up templates from disk and display the result in a Web Browser control which demonstrates using Razor HTML output from templates that contain HTML syntax which happens to me my target scenario for Html Help Builder.   The Razor Engine Wrapper Project The project I created to wrap Razor hosting has a fair bit of code and a number of classes associated with it. Most of the components are internally used and as you can see using the final RazorEngine<T> and HostContainer classes is pretty easy. The classes are extensible and I suspect developers will want to build more customized host containers for their applications. Host containers are the key to wrapping up all functionality – Engine, BaseTemplate, AppDomain Hosting, Caching etc in a logical piece that is ready to be plugged into an application. When looking at the code there are a couple of core features provided: Core Razor Engine Hosting This is the core Razor hosting which provides the basics of loading a template, compiling it into an assembly and executing it. This is fairly straightforward, but without a host container that can cache assemblies based on some criteria templates are recompiled and re-created each time which is inefficient (although pretty fast). The base engine wrapper implementation also supports hosting the Razor runtime in a separate AppDomain for security and the ability to unload it on demand. Host Containers The engine hosting itself doesn’t provide any sort of ‘runtime’ service like picking up files from disk, caching assemblies and so forth. So my implementation provides two HostContainers: RazorFolderHostContainer and RazorStringHostContainer. The FolderHost works off a base directory and loads templates based on relative paths (sort of like the ASP.NET runtime does off a virtual). The HostContainers also deal with caching of template assemblies – for the folder host the file date is tracked and checked for updates and unless the template is changed a cached assembly is reused. The StringHostContainer similiarily checks string hashes to figure out whether a particular string template was previously compiled and executed. The HostContainers also act as a simple startup environment and a single reference to easily store and reuse in an application. TemplateBase Classes The template base classes are the base classes that from which the Razor engine generates .NET code. A template is parsed into a class with an Execute() method and the class is based on this template type you can specify. RazorEngine<TBaseTemplate> can receive this type and the HostContainers default to specific templates in their base implementations. Template classes are customizable to allow you to create templates that provide application specific features and interaction from the template to your host application. How does the RazorEngine wrapper work? You can browse the source code in the links above or in the repository or download the source, but I’ll highlight some key features here. Here’s part of the RazorEngine implementation that can be used to host the runtime and that demonstrates the key code required to host the Razor runtime. The RazorEngine class is implemented as a generic class to reflect the Template base class type: public class RazorEngine<TBaseTemplateType> : MarshalByRefObject where TBaseTemplateType : RazorTemplateBase The generic type is used to internally provide easier access to the template type and assignments on it as part of the template processing. The class also inherits MarshalByRefObject to allow execution over AppDomain boundaries – something that all the classes discussed here need to do since there is much interaction between the host and the template. The first two key methods deal with creating a template assembly: /// <summary> /// Creates an instance of the RazorHost with various options applied. /// Applies basic namespace imports and the name of the class to generate /// </summary> /// <param name="generatedNamespace"></param> /// <param name="generatedClass"></param> /// <returns></returns> protected RazorTemplateEngine CreateHost(string generatedNamespace, string generatedClass) { Type baseClassType = typeof(TBaseTemplateType); RazorEngineHost host = new RazorEngineHost(new CSharpRazorCodeLanguage()); host.DefaultBaseClass = baseClassType.FullName; host.DefaultClassName = generatedClass; host.DefaultNamespace = generatedNamespace; host.NamespaceImports.Add("System"); host.NamespaceImports.Add("System.Text"); host.NamespaceImports.Add("System.Collections.Generic"); host.NamespaceImports.Add("System.Linq"); host.NamespaceImports.Add("System.IO"); return new RazorTemplateEngine(host); } /// <summary> /// Parses and compiles a markup template into an assembly and returns /// an assembly name. The name is an ID that can be passed to /// ExecuteTemplateByAssembly which picks up a cached instance of the /// loaded assembly. /// /// </summary> /// <param name="namespaceOfGeneratedClass">The namespace of the class to generate from the template</param> /// <param name="generatedClassName">The name of the class to generate from the template</param> /// <param name="ReferencedAssemblies">Any referenced assemblies by dll name only. Assemblies must be in execution path of host or in GAC.</param> /// <param name="templateSourceReader">Textreader that loads the template</param> /// <remarks> /// The actual assembly isn't returned here to allow for cross-AppDomain /// operation. If the assembly was returned it would fail for cross-AppDomain /// calls. /// </remarks> /// <returns>An assembly Id. The Assembly is cached in memory and can be used with RenderFromAssembly.</returns> public string ParseAndCompileTemplate( string namespaceOfGeneratedClass, string generatedClassName, string[] ReferencedAssemblies, TextReader templateSourceReader) { RazorTemplateEngine engine = CreateHost(namespaceOfGeneratedClass, generatedClassName); // Generate the template class as CodeDom GeneratorResults razorResults = engine.GenerateCode(templateSourceReader); // Create code from the codeDom and compile CSharpCodeProvider codeProvider = new CSharpCodeProvider(); CodeGeneratorOptions options = new CodeGeneratorOptions(); // Capture Code Generated as a string for error info // and debugging LastGeneratedCode = null; using (StringWriter writer = new StringWriter()) { codeProvider.GenerateCodeFromCompileUnit(razorResults.GeneratedCode, writer, options); LastGeneratedCode = writer.ToString(); } CompilerParameters compilerParameters = new CompilerParameters(ReferencedAssemblies); // Standard Assembly References compilerParameters.ReferencedAssemblies.Add("System.dll"); compilerParameters.ReferencedAssemblies.Add("System.Core.dll"); compilerParameters.ReferencedAssemblies.Add("Microsoft.CSharp.dll"); // dynamic support! // Also add the current assembly so RazorTemplateBase is available compilerParameters.ReferencedAssemblies.Add(Assembly.GetExecutingAssembly().CodeBase.Substring(8)); compilerParameters.GenerateInMemory = Configuration.CompileToMemory; if (!Configuration.CompileToMemory) compilerParameters.OutputAssembly = Path.Combine(Configuration.TempAssemblyPath, "_" + Guid.NewGuid().ToString("n") + ".dll"); CompilerResults compilerResults = codeProvider.CompileAssemblyFromDom(compilerParameters, razorResults.GeneratedCode); if (compilerResults.Errors.Count > 0) { var compileErrors = new StringBuilder(); foreach (System.CodeDom.Compiler.CompilerError compileError in compilerResults.Errors) compileErrors.Append(String.Format(Resources.LineX0TColX1TErrorX2RN, compileError.Line, compileError.Column, compileError.ErrorText)); this.SetError(compileErrors.ToString() + "\r\n" + LastGeneratedCode); return null; } AssemblyCache.Add(compilerResults.CompiledAssembly.FullName, compilerResults.CompiledAssembly); return compilerResults.CompiledAssembly.FullName; } Think of the internal CreateHost() method as setting up the assembly generated from each template. Each template compiles into a separate assembly. It sets up namespaces, and assembly references, the base class used and the name and namespace for the generated class. ParseAndCompileTemplate() then calls the CreateHost() method to receive the template engine generator which effectively generates a CodeDom from the template – the template is turned into .NET code. The code generated from our earlier example looks something like this: //------------------------------------------------------------------------------ // <auto-generated> // This code was generated by a tool. // Runtime Version:4.0.30319.1 // // Changes to this file may cause incorrect behavior and will be lost if // the code is regenerated. // </auto-generated> //------------------------------------------------------------------------------ namespace RazorTest { using System; using System.Text; using System.Collections.Generic; using System.Linq; using System.IO; using System.Reflection; public class RazorTemplate : RazorHosting.RazorTemplateBase { #line hidden public RazorTemplate() { } public override void Execute() { WriteLiteral("Hello "); Write(Context.FirstName); WriteLiteral("! Your entry was entered on: "); Write(Context.Entered); WriteLiteral("\r\n\r\n"); // Code block: Update the host Windows Form passed in through the context Context.WinForm.Text = "Hello World from Razor at " + DateTime.Now.ToString(); WriteLiteral("\r\nAppDomain Id:\r\n "); Write(AppDomain.CurrentDomain.FriendlyName); WriteLiteral("\r\n \r\nAssembly:\r\n "); Write(Assembly.GetExecutingAssembly().FullName); WriteLiteral("\r\n\r\nCode based output: \r\n"); // Write output with Response object from code string output = string.Empty; for (int i = 0; i < 10; i++) { output += i.ToString() + " "; } } } } Basically the template’s body is turned into code in an Execute method that is called. Internally the template’s Write method is fired to actually generate the output. Note that the class inherits from RazorTemplateBase which is the generic parameter I used to specify the base class when creating an instance in my RazorEngine host: var engine = new RazorEngine<RazorTemplateBase>(); This template class must be provided and it must implement an Execute() and Write() method. Beyond that you can create any class you chose and attach your own properties. My RazorTemplateBase class implementation is very simple: public class RazorTemplateBase : MarshalByRefObject, IDisposable { /// <summary> /// You can pass in a generic context object /// to use in your template code /// </summary> public dynamic Context { get; set; } /// <summary> /// Class that generates output. Currently ultra simple /// with only Response.Write() implementation. /// </summary> public RazorResponse Response { get; set; } public object HostContainer {get; set; } public object Engine { get; set; } public RazorTemplateBase() { Response = new RazorResponse(); } public virtual void Write(object value) { Response.Write(value); } public virtual void WriteLiteral(object value) { Response.Write(value); } /// <summary> /// Razor Parser implements this method /// </summary> public virtual void Execute() {} public virtual void Dispose() { if (Response != null) { Response.Dispose(); Response = null; } } } Razor fills in the Execute method when it generates its subclass and uses the Write() method to output content. As you can see I use a RazorResponse() class here to generate output. This isn’t necessary really, as you could use a StringBuilder or StringWriter() directly, but I prefer using Response object so I can extend the Response behavior as needed. The RazorResponse class is also very simple and merely acts as a wrapper around a TextWriter: public class RazorResponse : IDisposable { /// <summary> /// Internal text writer - default to StringWriter() /// </summary> public TextWriter Writer = new StringWriter(); public virtual void Write(object value) { Writer.Write(value); } public virtual void WriteLine(object value) { Write(value); Write("\r\n"); } public virtual void WriteFormat(string format, params object[] args) { Write(string.Format(format, args)); } public override string ToString() { return Writer.ToString(); } public virtual void Dispose() { Writer.Close(); } public virtual void SetTextWriter(TextWriter writer) { // Close original writer if (Writer != null) Writer.Close(); Writer = writer; } } The Rendering Methods of RazorEngine At this point I’ve talked about the assembly generation logic and the template implementation itself. What’s left is that once you’ve generated the assembly is to execute it. The code to do this is handled in the various RenderXXX methods of the RazorEngine class. Let’s look at the lowest level one of these which is RenderTemplateFromAssembly() and a couple of internal support methods that handle instantiating and invoking of the generated template method: public string RenderTemplateFromAssembly( string assemblyId, string generatedNamespace, string generatedClass, object context, TextWriter outputWriter) { this.SetError(); Assembly generatedAssembly = AssemblyCache[assemblyId]; if (generatedAssembly == null) { this.SetError(Resources.PreviouslyCompiledAssemblyNotFound); return null; } string className = generatedNamespace + "." + generatedClass; Type type; try { type = generatedAssembly.GetType(className); } catch (Exception ex) { this.SetError(Resources.UnableToCreateType + className + ": " + ex.Message); return null; } // Start with empty non-error response (if we use a writer) string result = string.Empty; using(TBaseTemplateType instance = InstantiateTemplateClass(type)) { if (instance == null) return null; if (outputWriter != null) instance.Response.SetTextWriter(outputWriter); if (!InvokeTemplateInstance(instance, context)) return null; // Capture string output if implemented and return // otherwise null is returned if (outputWriter == null) result = instance.Response.ToString(); } return result; } protected virtual TBaseTemplateType InstantiateTemplateClass(Type type) { TBaseTemplateType instance = Activator.CreateInstance(type) as TBaseTemplateType; if (instance == null) { SetError(Resources.CouldnTActivateTypeInstance + type.FullName); return null; } instance.Engine = this; // If a HostContainer was set pass that to the template too instance.HostContainer = this.HostContainer; return instance; } /// <summary> /// Internally executes an instance of the template, /// captures errors on execution and returns true or false /// </summary> /// <param name="instance">An instance of the generated template</param> /// <returns>true or false - check ErrorMessage for errors</returns> protected virtual bool InvokeTemplateInstance(TBaseTemplateType instance, object context) { try { instance.Context = context; instance.Execute(); } catch (Exception ex) { this.SetError(Resources.TemplateExecutionError + ex.Message); return false; } finally { // Must make sure Response is closed instance.Response.Dispose(); } return true; } The RenderTemplateFromAssembly method basically requires the namespace and class to instantate and creates an instance of the class using InstantiateTemplateClass(). It then invokes the method with InvokeTemplateInstance(). These two methods are broken out because they are re-used by various other rendering methods and also to allow subclassing and providing additional configuration tasks to set properties and pass values to templates at execution time. In the default mode instantiation sets the Engine and HostContainer (discussed later) so the template can call back into the template engine, and the context is set when the template method is invoked. The various RenderXXX methods use similar code although they create the assemblies first. If you’re after potentially cashing assemblies the method is the one to call and that’s exactly what the two HostContainer classes do. More on that in a minute, but before we get into HostContainers let’s talk about AppDomain hosting and the like. Running Templates in their own AppDomain With the RazorEngine class above, when a template is parsed into an assembly and executed the assembly is created (in memory or on disk – you can configure that) and cached in the current AppDomain. In .NET once an assembly has been loaded it can never be unloaded so if you’re loading lots of templates and at some time you want to release them there’s no way to do so. If however you load the assemblies in a separate AppDomain that new AppDomain can be unloaded and the assemblies loaded in it with it. In order to host the templates in a separate AppDomain the easiest thing to do is to run the entire RazorEngine in a separate AppDomain. Then all interaction occurs in the other AppDomain and no further changes have to be made. To facilitate this there is a RazorEngineFactory which has methods that can instantiate the RazorHost in a separate AppDomain as well as in the local AppDomain. The host creates the remote instance and then hangs on to it to keep it alive as well as providing methods to shut down the AppDomain and reload the engine. Sounds complicated but cross-AppDomain invocation is actually fairly easy to implement. Here’s some of the relevant code from the RazorEngineFactory class. Like the RazorEngine this class is generic and requires a template base type in the generic class name: public class RazorEngineFactory<TBaseTemplateType> where TBaseTemplateType : RazorTemplateBase Here are the key methods of interest: /// <summary> /// Creates an instance of the RazorHost in a new AppDomain. This /// version creates a static singleton that that is cached and you /// can call UnloadRazorHostInAppDomain to unload it. /// </summary> /// <returns></returns> public static RazorEngine<TBaseTemplateType> CreateRazorHostInAppDomain() { if (Current == null) Current = new RazorEngineFactory<TBaseTemplateType>(); return Current.GetRazorHostInAppDomain(); } public static void UnloadRazorHostInAppDomain() { if (Current != null) Current.UnloadHost(); Current = null; } /// <summary> /// Instance method that creates a RazorHost in a new AppDomain. /// This method requires that you keep the Factory around in /// order to keep the AppDomain alive and be able to unload it. /// </summary> /// <returns></returns> public RazorEngine<TBaseTemplateType> GetRazorHostInAppDomain() { LocalAppDomain = CreateAppDomain(null); if (LocalAppDomain == null) return null; /// Create the instance inside of the new AppDomain /// Note: remote domain uses local EXE's AppBasePath!!! RazorEngine<TBaseTemplateType> host = null; try { Assembly ass = Assembly.GetExecutingAssembly(); string AssemblyPath = ass.Location; host = (RazorEngine<TBaseTemplateType>) LocalAppDomain.CreateInstanceFrom(AssemblyPath, typeof(RazorEngine<TBaseTemplateType>).FullName).Unwrap(); } catch (Exception ex) { ErrorMessage = ex.Message; return null; } return host; } /// <summary> /// Internally creates a new AppDomain in which Razor templates can /// be run. /// </summary> /// <param name="appDomainName"></param> /// <returns></returns> private AppDomain CreateAppDomain(string appDomainName) { if (appDomainName == null) appDomainName = "RazorHost_" + Guid.NewGuid().ToString("n"); AppDomainSetup setup = new AppDomainSetup(); // *** Point at current directory setup.ApplicationBase = AppDomain.CurrentDomain.BaseDirectory; AppDomain localDomain = AppDomain.CreateDomain(appDomainName, null, setup); return localDomain; } /// <summary> /// Allow unloading of the created AppDomain to release resources /// All internal resources in the AppDomain are released including /// in memory compiled Razor assemblies. /// </summary> public void UnloadHost() { if (this.LocalAppDomain != null) { AppDomain.Unload(this.LocalAppDomain); this.LocalAppDomain = null; } } The static CreateRazorHostInAppDomain() is the key method that startup code usually calls. It uses a Current singleton instance to an instance of itself that is created cross AppDomain and is kept alive because it’s static. GetRazorHostInAppDomain actually creates a cross-AppDomain instance which first creates a new AppDomain and then loads the RazorEngine into it. The remote Proxy instance is returned as a result to the method and can be used the same as a local instance. The code to run with a remote AppDomain is simple: private RazorEngine<RazorTemplateBase> CreateHost() { if (this.Host != null) return this.Host; // Use Static Methods - no error message if host doesn't load this.Host = RazorEngineFactory<RazorTemplateBase>.CreateRazorHostInAppDomain(); if (this.Host == null) { MessageBox.Show("Unable to load Razor Template Host", "Razor Hosting", MessageBoxButtons.OK, MessageBoxIcon.Exclamation); } return this.Host; } This code relies on a local reference of the Host which is kept around for the duration of the app (in this case a form reference). To use this you’d simply do: this.Host = CreateHost(); if (host == null) return; string result = host.RenderTemplate( this.txtSource.Text, new string[] { "System.Windows.Forms.dll", "Westwind.Utilities.dll" }, this.CustomContext); if (result == null) { MessageBox.Show(host.ErrorMessage, "Template Execution Error", MessageBoxButtons.OK, MessageBoxIcon.Exclamation); return; } this.txtResult.Text = result; Now all templates run in a remote AppDomain and can be unloaded with simple code like this: RazorEngineFactory<RazorTemplateBase>.UnloadRazorHostInAppDomain(); this.Host = null; One Step further – Providing a caching ‘Runtime’ Once we can load templates in a remote AppDomain we can add some additional functionality like assembly caching based on application specific features. One of my typical scenarios is to render templates out of a scripts folder. So all templates live in a folder and they change infrequently. So a Folder based host that can compile these templates once and then only recompile them if something changes would be ideal. Enter host containers which are basically wrappers around the RazorEngine<t> and RazorEngineFactory<t>. They provide additional logic for things like file caching based on changes on disk or string hashes for string based template inputs. The folder host also provides for partial rendering logic through a custom template base implementation. There’s a base implementation in RazorBaseHostContainer, which provides the basics for hosting a RazorEngine, which includes the ability to start and stop the engine, cache assemblies and add references: public abstract class RazorBaseHostContainer<TBaseTemplateType> : MarshalByRefObject where TBaseTemplateType : RazorTemplateBase, new() { public RazorBaseHostContainer() { UseAppDomain = true; GeneratedNamespace = "__RazorHost"; } /// <summary> /// Determines whether the Container hosts Razor /// in a separate AppDomain. Seperate AppDomain /// hosting allows unloading and releasing of /// resources. /// </summary> public bool UseAppDomain { get; set; } /// <summary> /// Base folder location where the AppDomain /// is hosted. By default uses the same folder /// as the host application. /// /// Determines where binary dependencies are /// found for assembly references. /// </summary> public string BaseBinaryFolder { get; set; } /// <summary> /// List of referenced assemblies as string values. /// Must be in GAC or in the current folder of the host app/ /// base BinaryFolder /// </summary> public List<string> ReferencedAssemblies = new List<string>(); /// <summary> /// Name of the generated namespace for template classes /// </summary> public string GeneratedNamespace {get; set; } /// <summary> /// Any error messages /// </summary> public string ErrorMessage { get; set; } /// <summary> /// Cached instance of the Host. Required to keep the /// reference to the host alive for multiple uses. /// </summary> public RazorEngine<TBaseTemplateType> Engine; /// <summary> /// Cached instance of the Host Factory - so we can unload /// the host and its associated AppDomain. /// </summary> protected RazorEngineFactory<TBaseTemplateType> EngineFactory; /// <summary> /// Keep track of each compiled assembly /// and when it was compiled. /// /// Use a hash of the string to identify string /// changes. /// </summary> protected Dictionary<int, CompiledAssemblyItem> LoadedAssemblies = new Dictionary<int, CompiledAssemblyItem>(); /// <summary> /// Call to start the Host running. Follow by a calls to RenderTemplate to /// render individual templates. Call Stop when done. /// </summary> /// <returns>true or false - check ErrorMessage on false </returns> public virtual bool Start() { if (Engine == null) { if (UseAppDomain) Engine = RazorEngineFactory<TBaseTemplateType>.CreateRazorHostInAppDomain(); else Engine = RazorEngineFactory<TBaseTemplateType>.CreateRazorHost(); Engine.Configuration.CompileToMemory = true; Engine.HostContainer = this; if (Engine == null) { this.ErrorMessage = EngineFactory.ErrorMessage; return false; } } return true; } /// <summary> /// Stops the Host and releases the host AppDomain and cached /// assemblies. /// </summary> /// <returns>true or false</returns> public bool Stop() { this.LoadedAssemblies.Clear(); RazorEngineFactory<RazorTemplateBase>.UnloadRazorHostInAppDomain(); this.Engine = null; return true; } … } This base class provides most of the mechanics to host the runtime, but no application specific implementation for rendering. There are rendering functions but they just call the engine directly and provide no caching – there’s no context to decide how to cache and reuse templates. The key methods are Start and Stop and their main purpose is to start a new AppDomain (optionally) and shut it down when requested. The RazorFolderHostContainer – Folder Based Runtime Hosting Let’s look at the more application specific RazorFolderHostContainer implementation which is defined like this: public class RazorFolderHostContainer : RazorBaseHostContainer<RazorTemplateFolderHost> Note that a customized RazorTemplateFolderHost class template is used for this implementation that supports partial rendering in form of a RenderPartial() method that’s available to templates. The folder host’s features are: Render templates based on a Template Base Path (a ‘virtual’ if you will) Cache compiled assemblies based on the relative path and file time stamp File changes on templates cause templates to be recompiled into new assemblies Support for partial rendering using base folder relative pathing As shown in the startup examples earlier host containers require some startup code with a HostContainer tied to a persistent property (like a Form property): // The base path for templates - templates are rendered with relative paths // based on this path. HostContainer.TemplatePath = Path.Combine(Environment.CurrentDirectory, TemplateBaseFolder); // Default output rendering disk location HostContainer.RenderingOutputFile = Path.Combine(HostContainer.TemplatePath, "__Preview.htm"); // Add any assemblies you want reference in your templates HostContainer.ReferencedAssemblies.Add("System.Windows.Forms.dll"); // Start up the host container HostContainer.Start(); Once that’s done, you can render templates with the host container: // Pass the template path for full filename seleted with OpenFile Dialog // relativepath is: subdir\file.cshtml or file.cshtml or ..\file.cshtml var relativePath = Utilities.GetRelativePath(fileName, HostContainer.TemplatePath); if (!HostContainer.RenderTemplate(relativePath, Context, HostContainer.RenderingOutputFile)) { MessageBox.Show("Error: " + HostContainer.ErrorMessage); return; } webBrowser1.Navigate("file://" + HostContainer.RenderingOutputFile); The most critical task of the RazorFolderHostContainer implementation is to retrieve a template from disk, compile and cache it and then deal with deciding whether subsequent requests need to re-compile the template or simply use a cached version. Internally the GetAssemblyFromFileAndCache() handles this task: /// <summary> /// Internally checks if a cached assembly exists and if it does uses it /// else creates and compiles one. Returns an assembly Id to be /// used with the LoadedAssembly list. /// </summary> /// <param name="relativePath"></param> /// <param name="context"></param> /// <returns></returns> protected virtual CompiledAssemblyItem GetAssemblyFromFileAndCache(string relativePath) { string fileName = Path.Combine(TemplatePath, relativePath).ToLower(); int fileNameHash = fileName.GetHashCode(); if (!File.Exists(fileName)) { this.SetError(Resources.TemplateFileDoesnTExist + fileName); return null; } CompiledAssemblyItem item = null; this.LoadedAssemblies.TryGetValue(fileNameHash, out item); string assemblyId = null; // Check for cached instance if (item != null) { var fileTime = File.GetLastWriteTimeUtc(fileName); if (fileTime <= item.CompileTimeUtc) assemblyId = item.AssemblyId; } else item = new CompiledAssemblyItem(); // No cached instance - create assembly and cache if (assemblyId == null) { string safeClassName = GetSafeClassName(fileName); StreamReader reader = null; try { reader = new StreamReader(fileName, true); } catch (Exception ex) { this.SetError(Resources.ErrorReadingTemplateFile + fileName); return null; } assemblyId = Engine.ParseAndCompileTemplate(this.ReferencedAssemblies.ToArray(), reader); // need to ensure reader is closed if (reader != null) reader.Close(); if (assemblyId == null) { this.SetError(Engine.ErrorMessage); return null; } item.AssemblyId = assemblyId; item.CompileTimeUtc = DateTime.UtcNow; item.FileName = fileName; item.SafeClassName = safeClassName; this.LoadedAssemblies[fileNameHash] = item; } return item; } This code uses a LoadedAssembly dictionary which is comprised of a structure that holds a reference to a compiled assembly, a full filename and file timestamp and an assembly id. LoadedAssemblies (defined on the base class shown earlier) is essentially a cache for compiled assemblies and they are identified by a hash id. In the case of files the hash is a GetHashCode() from the full filename of the template. The template is checked for in the cache and if not found the file stamp is checked. If that’s newer than the cache’s compilation date the template is recompiled otherwise the version in the cache is used. All the core work defers to a RazorEngine<T> instance to ParseAndCompileTemplate(). The three rendering specific methods then are rather simple implementations with just a few lines of code dealing with parameter and return value parsing: /// <summary> /// Renders a template to a TextWriter. Useful to write output into a stream or /// the Response object. Used for partial rendering. /// </summary> /// <param name="relativePath">Relative path to the file in the folder structure</param> /// <param name="context">Optional context object or null</param> /// <param name="writer">The textwriter to write output into</param> /// <returns></returns> public bool RenderTemplate(string relativePath, object context, TextWriter writer) { // Set configuration data that is to be passed to the template (any object) Engine.TemplatePerRequestConfigurationData = new RazorFolderHostTemplateConfiguration() { TemplatePath = Path.Combine(this.TemplatePath, relativePath), TemplateRelativePath = relativePath, }; CompiledAssemblyItem item = GetAssemblyFromFileAndCache(relativePath); if (item == null) { writer.Close(); return false; } try { // String result will be empty as output will be rendered into the // Response object's stream output. However a null result denotes // an error string result = Engine.RenderTemplateFromAssembly(item.AssemblyId, context, writer); if (result == null) { this.SetError(Engine.ErrorMessage); return false; } } catch (Exception ex) { this.SetError(ex.Message); return false; } finally { writer.Close(); } return true; } /// <summary> /// Render a template from a source file on disk to a specified outputfile. /// </summary> /// <param name="relativePath">Relative path off the template root folder. Format: path/filename.cshtml</param> /// <param name="context">Any object that will be available in the template as a dynamic of this.Context</param> /// <param name="outputFile">Optional - output file where output is written to. If not specified the /// RenderingOutputFile property is used instead /// </param> /// <returns>true if rendering succeeds, false on failure - check ErrorMessage</returns> public bool RenderTemplate(string relativePath, object context, string outputFile) { if (outputFile == null) outputFile = RenderingOutputFile; try { using (StreamWriter writer = new StreamWriter(outputFile, false, Engine.Configuration.OutputEncoding, Engine.Configuration.StreamBufferSize)) { return RenderTemplate(relativePath, context, writer); } } catch (Exception ex) { this.SetError(ex.Message); return false; } return true; } /// <summary> /// Renders a template to string. Useful for RenderTemplate /// </summary> /// <param name="relativePath"></param> /// <param name="context"></param> /// <returns></returns> public string RenderTemplateToString(string relativePath, object context) { string result = string.Empty; try { using (StringWriter writer = new StringWriter()) { // String result will be empty as output will be rendered into the // Response object's stream output. However a null result denotes // an error if (!RenderTemplate(relativePath, context, writer)) { this.SetError(Engine.ErrorMessage); return null; } result = writer.ToString(); } } catch (Exception ex) { this.SetError(ex.Message); return null; } return result; } The idea is that you can create custom host container implementations that do exactly what you want fairly easily. Take a look at both the RazorFolderHostContainer and RazorStringHostContainer classes for the basic concepts you can use to create custom implementations. Notice also that you can set the engine’s PerRequestConfigurationData() from the host container: // Set configuration data that is to be passed to the template (any object) Engine.TemplatePerRequestConfigurationData = new RazorFolderHostTemplateConfiguration() { TemplatePath = Path.Combine(this.TemplatePath, relativePath), TemplateRelativePath = relativePath, }; which when set to a non-null value is passed to the Template’s InitializeTemplate() method. This method receives an object parameter which you can cast as needed: public override void InitializeTemplate(object configurationData) { // Pick up configuration data and stuff into Request object RazorFolderHostTemplateConfiguration config = configurationData as RazorFolderHostTemplateConfiguration; this.Request.TemplatePath = config.TemplatePath; this.Request.TemplateRelativePath = config.TemplateRelativePath; } With this data you can then configure any custom properties or objects on your main template class. It’s an easy way to pass data from the HostContainer all the way down into the template. The type you use is of type object so you have to cast it yourself, and it must be serializable since it will likely run in a separate AppDomain. This might seem like an ugly way to pass data around – normally I’d use an event delegate to call back from the engine to the host, but since this is running over AppDomain boundaries events get really tricky and passing a template instance back up into the host over AppDomain boundaries doesn’t work due to serialization issues. So it’s easier to pass the data from the host down into the template using this rather clumsy approach of set and forward. It’s ugly, but it’s something that can be hidden in the host container implementation as I’ve done here. It’s also not something you have to do in every implementation so this is kind of an edge case, but I know I’ll need to pass a bunch of data in some of my applications and this will be the easiest way to do so. Summing Up Hosting the Razor runtime is something I got jazzed up about quite a bit because I have an immediate need for this type of templating/merging/scripting capability in an application I’m working on. I’ve also been using templating in many apps and it’s always been a pain to deal with. The Razor engine makes this whole experience a lot cleaner and more light weight and with these wrappers I can now plug .NET based templating into my code literally with a few lines of code. That’s something to cheer about… I hope some of you will find this useful as well… Resources The examples and code require that you download the Razor runtimes. Projects are for Visual Studio 2010 running on .NET 4.0 Platform Installer 3.0 (install WebMatrix or MVC 3 for Razor Runtimes) Latest Code in Subversion Repository Download Snapshot of the Code Documentation (CHM Help File) © Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET  .NET  

  Read the article

• Why might a System.String object not cache its hash code?

  - by Dan Tao

  A glance at the source code for string.GetHashCode using Reflector reveals the following (for mscorlib.dll version 4.0): public override unsafe int GetHashCode() { fixed (char* str = ((char*) this)) { char* chPtr = str; int num = 0x15051505; int num2 = num; int* numPtr = (int*) chPtr; for (int i = this.Length; i > 0; i -= 4) { num = (((num << 5) + num) + (num >> 0x1b)) ^ numPtr[0]; if (i <= 2) { break; } num2 = (((num2 << 5) + num2) + (num2 >> 0x1b)) ^ numPtr[1]; numPtr += 2; } return (num + (num2 * 0x5d588b65)); } } Now, I realize that the implementation of GetHashCode is not specified and is implementation-dependent, so the question "is GetHashCode implemented in the form of X or Y?" is not really answerable. I'm just curious about a few things: If Reflector has disassembled the DLL correctly and this is the implementation of GetHashCode (in my environment), am I correct in interpreting this code to indicate that a string object, based on this particular implementation, would not cache its hash code? Assuming the answer is yes, why would this be? It seems to me that the memory cost would be minimal (one more 32-bit integer, a drop in the pond compared to the size of the string itself) whereas the savings would be significant, especially in cases where, e.g., strings are used as keys in a hashtable-based collection like a Dictionary<string, [...]>. And since the string class is immutable, it isn't like the value returned by GetHashCode will ever even change. What could I be missing? UPDATE: In response to Andras Zoltan's closing remark: There's also the point made in Tim's answer(+1 there). If he's right, and I think he is, then there's no guarantee that a string is actually immutable after construction, therefore to cache the result would be wrong. Whoa, whoa there! This is an interesting point to make (and yes it's very true), but I really doubt that this was taken into consideration in the implementation of GetHashCode. The statement "therefore to cache the result would be wrong" implies to me that the framework's attitude regarding strings is "Well, they're supposed to be immutable, but really if developers want to get sneaky they're mutable so we'll treat them as such." This is definitely not how the framework views strings. It fully relies on their immutability in so many ways (interning of string literals, assignment of all zero-length strings to string.Empty, etc.) that, basically, if you mutate a string, you're writing code whose behavior is entirely undefined and unpredictable. I guess my point is that for the author(s) of this implementation to worry, "What if this string instance is modified between calls, even though the class as it is publicly exposed is immutable?" would be like for someone planning a casual outdoor BBQ to think to him-/herself, "What if someone brings an atomic bomb to the party?" Look, if someone brings an atom bomb, party's over.

  Read the article

• ASP.NET Error Handling: Creating an extension method to send error email

  - by Jalpesh P. Vadgama

  Error handling in asp.net required to handle any kind of error occurred. We all are using that in one or another scenario. But some errors are there which will occur in some specific scenario in production environment in this case We can’t show our programming errors to the End user. So we are going to put a error page over there or whatever best suited as per our requirement. But as a programmer we should know that error so we can track the scenario and we can solve that error or can handle error. In this kind of situation an Error Email comes handy. Whenever any occurs in system it will going to send error in our email. Here I am going to write a extension method which will send errors in email. From asp.net 3.5 or higher version of .NET framework  its provides a unique way to extend your classes. Here you can fine more information about extension method. So lets create extension method via implementing a static class like following. I am going to use same code for sending email via my Gmail account from here. Following is code for that. using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Net.Mail; namespace Experiement { public static class MyExtension { public static void SendErrorEmail(this Exception ex) { MailMessage mailMessage = new MailMessage(new MailAddress("[email protected]") , new MailAddress("[email protected]")); mailMessage.Subject = "Exception Occured in your site"; mailMessage.IsBodyHtml = true; System.Text.StringBuilder errorMessage = new System.Text.StringBuilder(); errorMessage.AppendLine(string.Format("<B>{0}</B>:{1}<BR/>","Exception",ex.Message)); errorMessage.AppendLine(string.Format("<B>{0}</B>:{1}<BR/>", "Stack Trace", ex.StackTrace)); if (ex.InnerException != null) { errorMessage.AppendLine(string.Format("<B>{0}</B>:{1}<BR/>", " Inner Exception", ex.InnerException.Message)); errorMessage.AppendLine(string.Format("<B>{0}</B>:{1}<BR/>", "Inner Stack Trace", ex.InnerException.StackTrace)); } mailMessage.Body = errorMessage.ToString(); System.Net.NetworkCredential networkCredentials = new System.Net.NetworkCredential("[email protected]", "password"); SmtpClient smtpClient = new SmtpClient(); smtpClient.EnableSsl = true; smtpClient.UseDefaultCredentials = false; smtpClient.Credentials = networkCredentials; smtpClient.Host = "smtp.gmail.com"; smtpClient.Port = 587; smtpClient.Send(mailMessage); } } } After creating an extension method let us that extension method to handle error like following in page load event of page. using System; namespace Experiement { public partial class WebForm1 : System.Web.UI.Page { protected void Page_Load(object sender,System.EventArgs e) { try { throw new Exception("My custom Exception"); } catch (Exception ex) { ex.SendErrorEmail(); Response.Write(ex.Message); } } } } Now in above code I have generated custom exception for example but in production It can be any Exception. And you can see I have use ex.SendErrorEmail() function in catch block to send email. That’s it.. Now it will throw exception and you will email in your email box like below.   That’s its. It’s so simple…Stay tuned for more.. Happy programming.. Technorati Tags: Exception,Extension Mehtod,Error Handling,ASP.NET

  Read the article

• SQL SERVER – Core Concepts – Elasticity, Scalability and ACID Properties – Exploring NuoDB an Elastically Scalable Database System

  - by pinaldave

  I have been recently exploring Elasticity and Scalability attributes of databases. You can see that in my earlier blog posts about NuoDB where I wanted to look at Elasticity and Scalability concepts. The concepts are very interesting, and intriguing as well. I have discussed these concepts with my friend Joyti M and together we have come up with this interesting read. The goal of this article is to answer following simple questions What is Elasticity? What is Scalability? How ACID properties vary from NOSQL Concepts? What are the prevailing problems in the current database system architectures? Why is NuoDB  an innovative and welcome change in database paradigm? Elasticity This word’s original form is used in many different ways and honestly it does do a decent job in holding things together over the years as a person grows and contracts. Within the tech world, and specifically related to software systems (database, application servers), it has come to mean a few things - allow stretching of resources without reaching the breaking point (on demand). What are resources in this context? Resources are the usual suspects – RAM/CPU/IO/Bandwidth in the form of a container (a process or bunch of processes combined as modules). When it is about increasing resources the simplest idea which comes to mind is the addition of another container. Another container means adding a brand new physical node. When it is about adding a new node there are two questions which comes to mind. 1) Can we add another node to our software system? 2) If yes, does adding new node cause downtime for the system? Let us assume we have added new node, let us see what the new needs of the system are when a new node is added. Balancing incoming requests to multiple nodes Synchronization of a shared state across multiple nodes Identification of “downstate” and resolution action to bring it to “upstate” Well, adding a new node has its advantages as well. Here are few of the positive points Throughput can increase nearly horizontally across the node throughout the system Response times of application will increase as in-between layer interactions will be improved Now, Let us put the above concepts in the perspective of a Database. When we mention the term “running out of resources” or “application is bound to resources” the resources can be CPU, Memory or Bandwidth. The regular approach to “gain scalability” in the database is to look around for bottlenecks and increase the bottlenecked resource. When we have memory as a bottleneck we look at the data buffers, locks, query plans or indexes. After a point even this is not enough as there needs to be an efficient way of managing such large workload on a “single machine” across memory and CPU bound (right kind of scheduling)  workload. We next move on to either read/write separation of the workload or functionality-based sharing so that we still have control of the individual. But this requires lots of planning and change in client systems in terms of knowing where to go/update/read and for reporting applications to “aggregate the data” in an intelligent way. What we ideally need is an intelligent layer which allows us to do these things without us getting into managing, monitoring and distributing the workload. Scalability In the context of database/applications, scalability means three main things Ability to handle normal loads without pressure E.g. X users at the Y utilization of resources (CPU, Memory, Bandwidth) on the Z kind of hardware (4 processor, 32 GB machine with 15000 RPM SATA drives and 1 GHz Network switch) with T throughput Ability to scale up to expected peak load which is greater than normal load with acceptable response times Ability to provide acceptable response times across the system E.g. Response time in S milliseconds (or agreed upon unit of measure) – 90% of the time The Issue – Need of Scale In normal cases one can plan for the load testing to test out normal, peak, and stress scenarios to ensure specific hardware meets the needs. With help from Hardware and Software partners and best practices, bottlenecks can be identified and requisite resources added to the system. Unfortunately this vertical scale is expensive and difficult to achieve and most of the operational people need the ability to scale horizontally. This helps in getting better throughput as there are physical limits in terms of adding resources (Memory, CPU, Bandwidth and Storage) indefinitely. Today we have different options to achieve scalability: Read & Write Separation The idea here is to do actual writes to one store and configure slaves receiving the latest data with acceptable delays. Slaves can be used for balancing out reads. We can also explore functional separation or sharing as well. We can separate data operations by a specific identifier (e.g. region, year, month) and consolidate it for reporting purposes. For functional separation the major disadvantage is when schema changes or workload pattern changes. As the requirement grows one still needs to deal with scale need in manual ways by providing an abstraction in the middle tier code. Using NOSQL solutions The idea is to flatten out the structures in general to keep all values which are retrieved together at the same store and provide flexible schema. The issue with the stores is that they are compromising on mostly consistency (no ACID guarantees) and one has to use NON-SQL dialect to work with the store. The other major issue is about education with NOSQL solutions. Would one really want to make these compromises on the ability to connect and retrieve in simple SQL manner and learn other skill sets? Or for that matter give up on ACID guarantee and start dealing with consistency issues? Hybrid Deployment – Mac, Linux, Cloud, and Windows One of the challenges today that we see across On-premise vs Cloud infrastructure is a difference in abilities. Take for example SQL Azure – it is wonderful in its concepts of throttling (as it is shared deployment) of resources and ability to scale using federation. However, the same abilities are not available on premise. This is not a mistake, mind you – but a compromise of the sweet spot of workloads, customer requirements and operational SLAs which can be supported by the team. In today’s world it is imperative that databases are available across operating systems – which are a commodity and used by developers of all hues. An Ideal Database Ability List A system which allows a linear scale of the system (increase in throughput with reasonable response time) with the addition of resources A system which does not compromise on the ACID guarantees and require developers to learn new paradigms A system which does not force fit a new way interacting with database by learning Non-SQL dialect A system which does not force fit its mechanisms for providing availability across its various modules. Well NuoDB is the first database which has all of the above abilities and much more. In future articles I will cover my hands-on experience with it. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

  Read the article

• No root file system is defined error after installation

  - by LearnCode

  I installed ubuntu through Wubi and once i rebooted I get no root file system defined error. here's the output of the boot_info_script.Could anyone point me out where the error is. Boot Info Script 0.60 from 17 May 2011 ============================= Boot Info Summary: =============================== => Windows is installed in the MBR of /dev/sda. => Windows is installed in the MBR of /dev/sdb. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe /ntldr /ntdetect.com /wubildr /ubuntu/winboot/wubildr /wubildr.mbr /ubuntu/winboot/wubildr.mbr /ubuntu/disks/root.disk /ubuntu/disks/swap.disk sda1/Wubi: _____________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' sda2: __________________________________________________________________________ File system: vfat Boot sector type: Unknown Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /boot.ini /ntldr /NTDETECT.COM sdb1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 240 heads, 63 sectors/track, 20673 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 301,250,879 301,250,817 7 NTFS / exFAT / HPFS /dev/sda2 301,250,943 312,575,759 11,324,817 c W95 FAT32 (LBA) GUID Partition Table detected, but does not seem to be used. Partition Start Sector End Sector # of Sectors System /dev/sda1 323,465,741,313,502,988275,962,973,585-323,465,465,350,529,402 - /dev/sda2 242,728,591,638,290,720578,721,383,108,845,578335,992,791,470,554,859 - /dev/sda3 1,827,498,311,425,204,2562,091,935,274,843,009,907264,436,963,417,805,652 - /dev/sda4 579,711,218,081,401,3572,006,665,459,744,645,1521,426,954,241,663,243,796 - /dev/sda11 270,286,346,402,038,1183,786,543,326,404,525,9543,516,256,980,002,487,837 - /dev/sda12 4,179,681,002,230,769,6684,179,389,374,010,033,387-291,628,220,736,280 - /dev/sda13 232,556,480,979,456,1311,160,152,593,793,119,235927,596,112,813,663,105 - /dev/sda14 98,342,784,050,266,9183,691,264,578,843,725,1953,592,921,794,793,458,278 - /dev/sda15 2,307,845,219,957,882,4961,850,841,032,955,276,350-457,004,187,002,606,145 - /dev/sda16 512,592,046,878,946,497368,458,231,024,779,444-144,133,815,854,167,052 - /dev/sda17 2,504,135,232,870,384,3923,665,087,872,719,320,8291,160,952,639,848,936,438 - /dev/sda18 3,783,181,605,270,691,304122,034,509,624,708,942-3,661,147,095,645,982,361 - /dev/sda19 3,519,661,520,275,829,5122,376,243,094,723,723,587-1,143,418,425,552,105,924 - /dev/sda20 3,867,920,076,859,0744,494,691,111,933,625,1044,490,823,191,856,766,031 - /dev/sda21 1,500,144,061,909,253,7612,511,182,033,846,676,3401,011,037,971,937,422,580 - /dev/sda22 13,035,625,499,900,0062,360,168,613,941,394,9472,347,132,988,441,494,942 - /dev/sda23 4,228,978,682,068,599,48813,159,423,631,648,263-4,215,819,258,436,951,224 - /dev/sda24 3,695,955,742,872,046,9084,561,928,726,501,845,776865,972,983,629,798,869 - /dev/sda25 1,297,460,286,683,948,0461,444,350,486,339,417,957146,890,199,655,469,912 - /dev/sda26 1,228,858,248,533,131,831 0-1,228,858,248,533,131,830 - /dev/sda121 3,189,184,846,146,487,1461,849,820,258,006,914,852-1,339,364,588,139,572,293 - /dev/sda122 1,226,215,547,991,800,578389,781,518,734,546,300-836,434,029,257,254,277 - /dev/sda123 3,851,660,168,574,583,4654,046,215,657,583,031,556194,555,489,008,448,092 - /dev/sda124 1,197,460,980,174,153,341699,103,965,005,093,246-498,357,015,169,060,094 - Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 750.2 GB, 750153367552 bytes 255 heads, 63 sectors/track, 91200 cylinders, total 1465143296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 2,048 1,465,143,295 1,465,141,248 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 iso9660 Ubuntu 11.04 amd64 /dev/loop1 squashfs /dev/sda1 E814B55B14B52E06 ntfs /dev/sda2 01CD-023B vfat HP_RECOVERY /dev/sdb1 7836F22A36F1E8D0 ntfs Elements ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /cdrom iso9660 (ro,noatime) /dev/loop1 /rofs squashfs (ro,noatime) /dev/sdb1 /mnt fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) ================================ sda2/boot.ini: ================================ -------------------------------------------------------------------------------- [boot loader] timeout=0 default=C:\CMDCONS\BOOTSECT.DAT [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons -------------------------------------------------------------------------------- ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown GPT Partiton Type c104043000e9b9040dff24b580010100 Unknown GPT Partiton Type 46313020746f20737461727420746865 Unknown GPT Partiton Type 65727920706172746974696f6e207761 Unknown GPT Partiton Type 727920706172746974696f6e0d0a0000 Unknown GPT Partiton Type 000f84e5f7668b162404e82804744066 Unknown GPT Partiton Type ce01e8dc038bfe66391624047505e8d9 Unknown GPT Partiton Type 0345086603f0e881030bd2740333d240 Unknown GPT Partiton Type bece01e8db0287fec645041266895508 Unknown GPT Partiton Type 01f60634010175078b363b01e854f5e8 Unknown GPT Partiton Type 313825740ffec03865107408fec03824 Unknown GPT Partiton Type 02f60634014074088bfdbece01e85101 Unknown GPT Partiton Type 263401f9e894f30f858ef4e8e201e8ec Unknown GPT Partiton Type f7e960f35245434f5645525966606633 Unknown GPT Partiton Type 660faf1e00106603dac3668b0e001066 Unknown GPT Partiton Type 8bfd386d04740583c710e2f6c36660c6 Unknown GPT Partiton Type 04ebf132c0b91000f3aac3bf0c04ebf3 Unknown GPT Partiton Type 02662bc1660fb71e0e02662bc366031e Unknown GPT Partiton Type f4b40ebb0700b901003c08751381ff25 Unknown GPT Partiton Type 534f465448494e4b90653f62011b0100 Unknown GPT Partiton Type 0b050900027777772e68702e636f6d00 Unknown GPT Partiton Type d441a0f5030003000ecb744a08bb3746 Unknown GPT Partiton Type f8579a116b4a7aa931cde97a4b9b5c09 Unknown GPT Partiton Type 7229990415b77c0a1970e7e824237a3a Unknown GPT Partiton Type afb6e34d6b4bd8c7c0eada19a9786cc3 Unknown BootLoader on sda1/Wubi 00000000 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 |0000000000000000| * 00000200 Unknown BootLoader on sda2 00000000 e9 a7 00 52 45 43 4f 56 45 52 59 00 02 08 20 00 |...RECOVERY... .| 00000010 02 00 00 00 00 f8 00 00 3f 00 f0 00 7f b9 f4 11 |........?.......| 00000020 8c cd ac 00 1e 2b 00 00 00 00 00 00 02 00 00 00 |.....+..........| 00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000040 80 00 29 3b 02 cd 01 20 20 20 20 20 20 20 20 20 |..);... | 00000050 20 20 46 41 54 33 32 20 20 20 8b d0 c1 e2 02 80 | FAT32 ......| 00000060 e6 01 66 c1 e8 07 66 3b 46 f8 74 2a 66 89 46 f8 |..f...f;F.t*f.F.| 00000070 66 03 46 f4 66 0f b6 5e 28 80 e3 0f 74 0f 3a 5e |f.F.f..^(...t.:^| 00000080 10 0f 83 90 00 66 0f af 5e 24 66 03 c3 bb e0 07 |.....f..^$f.....| 00000090 b9 01 00 e8 cf 00 8b da 66 8b 87 00 7e 66 25 ff |........f...~f%.| 000000a0 ff ff 0f 66 3d f8 ff ff 0f c3 33 c9 8e d9 8e c1 |...f=.....3.....| 000000b0 8e d1 66 bc f4 7b 00 00 bd 00 7c 66 0f b6 46 10 |..f..{....|f..F.| 000000c0 66 f7 66 24 66 0f b7 56 0e 66 03 56 1c 66 89 56 |f.f$f..V.f.V.f.V| 000000d0 f4 66 03 c2 66 89 46 fc 66 c7 46 f8 ff ff ff ff |.f..f.F.f.F.....| 000000e0 66 8b 46 2c 66 50 e8 af 00 bb 70 00 b9 01 00 e8 |f.F,fP....p.....| 000000f0 73 00 bf 00 07 b1 0b be a9 7d f3 a6 74 2a 03 f9 |s........}..t*..| 00000100 83 c7 15 81 ff 00 09 72 ec 66 40 4a 75 db 66 58 |[email protected]| 00000110 e8 47 ff 72 cf be b4 7d ac 84 c0 74 09 b4 0e bb |.G.r...}...t....| 00000120 07 00 cd 10 eb f2 cd 19 66 58 ff 75 09 ff 75 0f |........fX.u..u.| 00000130 66 58 bb 00 20 66 83 f8 02 72 da 66 3d f8 ff ff |fX.. f...r.f=...| 00000140 0f 73 d2 66 50 e8 50 00 0f b6 4e 0d e8 16 00 c1 |.s.fP.P...N.....| 00000150 e1 05 03 d9 66 58 53 e8 00 ff 5b 72 d8 8a 56 40 |....fXS...[r..V@| 00000160 ea 00 00 00 20 66 60 66 6a 00 66 50 53 6a 00 66 |.... f`fj.fPSj.f| 00000170 68 10 00 01 00 8b f4 b8 00 42 8a 56 40 cd 13 be |h........B.V@...| 00000180 c7 7d 72 94 67 83 44 24 06 20 66 67 ff 44 24 08 |.}r.g.D$. fg.D$.| 00000190 e2 e3 83 c4 10 66 61 c3 66 48 66 48 66 0f b6 56 |.....fa.fHfHf..V| 000001a0 0d 66 f7 e2 66 03 46 fc c3 4e 54 4c 44 52 20 20 |.f..f.F..NTLDR | 000001b0 20 20 20 20 0d 0a 4e 6f 20 53 79 73 74 65 6d 20 | ..No System | 000001c0 44 69 73 6b 20 6f 72 0d 0a 44 69 73 6b 20 49 2f |Disk or..Disk I/| 000001d0 4f 20 65 72 72 6f 72 0d 0a 50 72 65 73 73 20 61 |O error..Press a| 000001e0 20 6b 65 79 20 74 6f 20 72 65 73 74 61 72 74 0d | key to restart.| 000001f0 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== umount: /isodevice: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1))

  Read the article

• System blacks out when resuming on opening lid

  - by Ashfaq

  It is happening now and then but frequently these days. My system E420 Lenovo Thinkpad running 12.04 LTS blacks out and doesn't respond when woke up from sleep by opening the lid. I then have to forcibly press the Start button and restart the entire system which is creating a headache for me. Please suggest a way to overcome this problem. Main characteristics leading to this that I have noticed are: When a video is paused before I suspend the system When Eclipse or pgAdmin is running before suspending the system

  Read the article

• JDK bug migration milestone: JIRA now the system of record

  - by darcy

  I'm pleased to announce the OpenJDK bug database migration project has reached a significant milestone: the JDK has switched from the legacy Sun "bugtraq" system to a new internal JIRA instance as the system of record for our bug tracking. This completes the initial phase of the previously described plan of getting OpenJDK onto an externally visible and writable bug tracker. The identities contained in the current system include recognized OpenJDK contributors. The bug migration effort to date has been sizable in multiple dimensions. There are around 140,000 distinct issues imported into the JDK project of the JIRA instance, nearly 165,000 if backport issues to track multiple-release information are included. Separately, the Code Tools OpenJDK project has its own JIRA project populated with several thousands existing bugs. Once the OpenJDK JIRA instance is externalized, approved OpenJDK projects will be able to request the creation of a JIRA project for issue tracking. There are many differences in the schema used to model bugs between the legacy bug system and the schema for the new JIRA projects. We've favored simplifications to the existing system where possible and, after much discussion, we've settled on five main states for the OpenJDK JIRA projects: New Open In progress Resolved Closed The Open and In-progress states can have a substate Understanding field set to track whether the issues has its "Cause Known" or "Fix understood". In the closed state, a Verification field can indicate whether a fix has been verified, unverified, or if the fix has failed. At the moment, there will be very little externally visible difference between JIRA for OpenJDK and the legacy system it replaces. One difference is that bug numbers for newly filed issues in the JIRA JDK project will be 8000000 and above. If you are working with JDK Hg repositories, update any local copies of jcheck to the latest version which recognizes this expanded bug range. (The bug numbers of existing issues have been preserved on the import into JIRA). Relatively soon, we plan for the pages published on bugs.sun.com to be generated from information in JIRA rather than in the legacy system. When this occurs, there will be some differences in the page display and the terminology used will be revised to reflect JIRA usage, such as referring to the "component/subcomponent" of an issue rather than its "category". The exact timing of this transition will be announced when it is known. We don't currently have a firm timeline for externalization of the JIRA system. Updates will be provided as they become available. However, that is unlikely to happen before JavaOne next week!

  Read the article

• Redesigning an Information System - Part 1

  - by dbradley

  Through the next few weeks or months I'd like to run a small series of articles sharing my experiences from the largest of the project I've worked on and explore some of the real-world problems I've come across and how we went about solving them. I'm afraid I can't give too many specifics on the project right now as it's not yet complete so you'll have to forgive me for being a little abstract in places! To start with I'm going to run through a little of the background of the problem and the motivations to re-design from scratch. Then I'll work through the approaches taken to understanding the requirements, designing, implementing, testing and migrating to the new system. Motivations for Re-designing a Large Information System The system is one that's been in place for a number of years and was originally designed to do a significantly different one to what it's now being used for. This is mainly due to the product maturing as well as client requirements changing. As with most information systems this one can be defined in four main areas of functionality: Input – adding information to the system Storage – persisting information in an efficient, searchable structure Output – delivering the information to the client Control – management of the process There can be a variety of reasons to re-design an existing system; a few of our own turned out to be factors such as: Overall system reliability System response time Failure isolation and recovery Maintainability of code and information General extensibility to solve future problem Separation of business and product concerns New or improved features The factor that started the thought process was the desire to improve the way in which information was entered into the system. However, this alone was not the entire reason for deciding to redesign. Business Drivers Typically all software engineers would always prefer to do a project from scratch themselves. It generally means you don't have to deal with problems created by predecessors and you can create your own absolutely perfect solution. However, the reality of working within a business is that the bottom line comes down to return on investment. For a medium sized business such as mine there must be actual value able to be delivered within a reasonable timeframe for any work to be started. As a result, any long term project will generally take a lot of effort and consideration to be approved by those in charge and therefore it might be better to break down the project into more manageable chunks which allow more frequent deliverables and also value within a shorter timeframe. As the only thing of concern was the methods for inputting information, this is where we started with requirements gathering and design. However knowing that there might be more to the problem and not limiting your design decisions before the requirements is key to finding the best solutions.

  Read the article

• .Net Windows Service Throws EventType clr20r3 system.data.sqlclient.sql error

  - by William Edmondson

  I have a .Net/c# 2.0 windows service. The entry point is wrapped in a try catch block yet when I look at the server's application event log I seem a number of "EventType clr20r3" errors that are causing the service to die unexpectedly. The catch block has a "catch (Exception ex)". Each sql commands is of the type "CommandType.StoredProcedure" and are executed with SqlDataReader's. These sproc calls function correctly 99% of time and have all been thoroughly unit tested, profiled, and QA'd. I additionally wrapped these calls in try catch blocks just to be sure and am still experiencing these unhandled exceptions. This only in our production environment and cannot be duplicated in our dev or staging environments (even under heavy load). Why would my error handling not catch this particular error? Is there anyway to capture more detail as to the root cause of the problem? Here is an example of the event log: EventType clr20r3, P1 RDC.OrderProcessorService, P2 1.0.0.0, P3 4ae6a0d0, P4 system.data, P5 2.0.0.0, P6 4889deaf, P7 2490, P8 2c, P9 system.data.sqlclient.sql, P10 NIL. Additionally The Order Processor service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.

  Read the article

• System Tray Popup Windows 7 Style

  - by Mason Blier

  Hey All, I want something like this: http://cybernetnews.com/wp-content/uploads/2008/10/windows-7-wireless.jpg This window is not resizable, and aligns itself above the system tray icon which it is related to. I have this: http://i.imgur.com/79FZi.png Which is resizeable, and it goes wherever it feels like. If you click the volume control in Win 7, it always pops up directly above the icon. This is ideal. I've found this reference which I think is trying to solve the same problem (can't tell though as the images are dead), http://stackoverflow.com/questions/2169006/create-a-system-tray-styled-box-in-winforms-c but I'm using WPF and I'm not sure how to get these Form objects they refer to from my Window object. This is the XAML declaration of my window atm, <Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" x:Class="WirelessControl.Window1" x:Name="Window" Title="Window1" Width="260" Height="370" mc:Ignorable="d" WindowStyle="None"></Window> I feel like based on how common this is in Windows that there must be a fairly easy way to do this. ResizeMode="NoResize" causes my window border to disappear, so that's no help. Thanks guys, I hope I was comprehensive enough.

  Read the article

• Does jQuery strip some html elements from a string when using .html()?

  - by Nic Hubbard

  I have a var that contains a full html page, including the head, html, body, etc. When I pass that string into the .html() function, jQuery strips out all those elements, such as body, html, head, etc, which I don't want. My data var contains: <html> <head> <title>Untitled Document</title> </head> <body> </body> </html> // data is a full html document string data = $('<div/>').html(data); // jQuery stips my document string! alert(data.find('head').html()); I am needing to manipulate a full html page string, so that I can return what is in the element. I would like to do this with jQuery, but it seems all of the methods, append(), prepend() and html() all try to convert the string to dom elements, which remove all the other parts of a full html page. Is there another way that I could do this? I would be fine using another method. My final goal is to find certain elements inside my string, so I figured jQuery would be best, since I am so used to it. But, if it is going to trim and remove parts of my string, I am going to have to look for another method. Ideas?

  Read the article

• Regex to check if exact string exists including #

  - by Jayrox

  New question As suggested by Asaph in previous question: Regex to check if exact string exists I am looking for a way to check if an exact string match exists in another string using Regex or any better method suggested. I understand that you tell regex to match a space or any other non-word character at the beginning or end of a string. However, I don't know exactly how to set it up. Search String: #t String 1: Hello World, Nice to see you! #t String 2: Hello World, Nice to see you! String 3: #T Hello World, Nice to see you! I would like to use the search string and compare it to String 1, String 2 and String 3 and only get a positive match from String 1 and String 3 but not from String 2. Requirements: Search String may be at any character position in the Subject. There may or may not be a white-space character before or after it. I do not want it to match if it is part of another string; such as part of a word. For the sake of this question: I think I would do this using this pattern: /\b\#t\b/gi However, this is not returning the results as I would have expected. I am able to find the exact matches for normal strings (strings where # isn't present) using: /\b{$search_string}\b/gi Additional info: this will be used in PHP 5

  Read the article

• split string error in a compiled VB.NET class

  - by Andy Payne

  I'm having some trouble compiling some VB code I wrote to split a string based on a set of predefined delimeters (comma, semicolon, colon, etc). I have successfully written some code that can be loaded inside a custom VB component (I place this code inside a VB.NET component in a plug-in called Grasshopper) and everything works fine. For instance, let's say my incoming string is "123,456". When I feed this string into the VB code I wrote, I get a new list where the first value is "123" and the second value is "456". However, I have been trying to compile this code into it's own class so I can load it inside Grasshopper separately from the standard VB component. When I try to compile this code, it isn't separating the string into a new list with two values. Instead, I get a message that says "System.String []". Do you guys see anything wrong in my compile code? You can find an screenshot image of my problem at the following link: click to see image This is the VB code for the compiled class: Public Class SplitString Inherits GH_Component Public Sub New() MyBase.New("Split String", "Split", "Splits a string based on delimeters", "FireFly", "Serial") End Sub Public Overrides ReadOnly Property ComponentGuid() As System.Guid Get Return New Guid("3205caae-03a8-409d-8778-6b0f8971df52") End Get End Property Protected Overrides ReadOnly Property Internal_Icon_24x24() As System.Drawing.Bitmap Get Return My.Resources.icon_splitstring End Get End Property Protected Overrides Sub RegisterInputParams(ByVal pManager As Grasshopper.Kernel.GH_Component.GH_InputParamManager) pManager.Register_StringParam("String", "S", "Incoming string separated by a delimeter like a comma, semi-colon, colon, or forward slash", False) End Sub Protected Overrides Sub RegisterOutputParams(ByVal pManager As Grasshopper.Kernel.GH_Component.GH_OutputParamManager) pManager.Register_StringParam("Tokenized Output", "O", "Tokenized Output") End Sub Protected Overrides Sub SolveInstance(ByVal DA As Grasshopper.Kernel.IGH_DataAccess) Dim myString As String DA.GetData(0, myString) myString = myString.Replace(",", "|") myString = myString.Replace(":", "|") myString = myString.Replace(";", "|") myString = myString.Replace("/", "|") myString = myString.Replace(")(", "|") myString = myString.Replace("(", String.Empty) myString = myString.Replace(")", String.Empty) Dim parts As String() = myString.Split("|"c) DA.SetData(0, parts) End Sub End Class This is the custom VB code I created inside Grasshopper: Private Sub RunScript(ByVal myString As String, ByRef A As Object) myString = myString.Replace(",", "|") myString = myString.Replace(":", "|") myString = myString.Replace(";", "|") myString = myString.Replace("/", "|") myString = myString.Replace(")(", "|") myString = myString.Replace("(", String.Empty) myString = myString.Replace(")", String.Empty) Dim parts As String() = myString.Split("|"c) A = parts End Sub ' ' End Class

  Read the article

• Munging non-printable characters to dots using string.translate()

  - by Jim Dennis

  So I've done this before and it's a surprising ugly bit of code for such a seemingly simple task. The goal is to translate any non-printable character into a . (dot). For my purposes "printable" does exclude the last few characters from string.printable (new-lines, tabs, and so on). This is for printing things like the old MS-DOS debug "hex dump" format ... or anything similar to that (where additional whitespace will mangle the intended dump layout). I know I can use string.translate() and, to use that, I need a translation table. So I use string.maketrans() for that. Here's the best I could come up with: filter = string.maketrans( string.translate(string.maketrans('',''), string.maketrans('',''),string.printable[:-5]), '.'*len(string.translate(string.maketrans('',''), string.maketrans('',''),string.printable[:-5]))) ... which is an unreadable mess (though it does work). From there you can call use something like: for each_line in sometext: print string.translate(each_line, filter) ... and be happy. (So long as you don't look under the hood). Now it is more readable if I break that horrid expression into separate statements: ascii = string.maketrans('','') # The whole ASCII character set nonprintable = string.translate(ascii, ascii, string.printable[:-5]) # Optional delchars argument filter = string.maketrans(nonprintable, '.' * len(nonprintable)) And it's tempting to do that just for legibility. However, I keep thinking there has to be a more elegant way to express this!

  Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >