Search Results

Search found 29426 results on 1178 pages for 'user99572 is fine'.

Page 64/1178 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

  • Server 2008, 2 NICs, 2 fixed IPs - big delays using internet

    - by user46055
    Hi geniuses I have an all in one Windows 2008 server, configured with AD/DHCP/DNS/RRAS - all set up with wizards and no specific tweaking. The server has 2 network adapters : one of which ("MyWAN") is plugged into our office's internet connection, the other ("MyLAN") is plugged into a local switch, which is also where all our desktops are connected. So this one server is doing everything. When first set up, MyLAN had a fixed IP of 192.168.2.1 and served the desktops with DHCP scope 192.168.2.50-99. It also told them to use 192.168.2.1 as DNS and gateway. MyWAN was setup to take its IP etc from DHCP, being handled by the building's router and ADSL modem etc. All desktops were setup to use DHCP. This all worked perfectly fine, until I recently changed MyWAN to have a static IP (I wanted to access it from home, and needed to give it a static IP to port map in the building's router). Things still work, but there is now a long delay when accessing the internet. The actual speed is as before when downloading, but there is a pause of 3-6 secs when connecting to new hosts (for example if I browse to slashdot from either a desktop or the server itself, it'll hang on connecting to slashdot.org, hang again on connecting to *.fsdn, *.google-analytics.com and all the other hosts referenced from the main page). If I ping slashdot.org from the server, I get the following : Pinging slashdot.org [216.34.181.45] with 32 bytes of data: Reply from 192.168.2.1: Destination host unreachable. Reply from 216.34.181.45: bytes=32 time=99ms TTL=239 Reply from 216.34.181.45: bytes=32 time=100ms TTL=239 Reply from 216.34.181.45: bytes=32 time=101ms TTL=239 Pinging anywhere external always seems to hit 192.168.2.1 first, which doesn't seem right. Trying tracert from the server gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 MYSERVER01.intranet [192.168.2.1] reports: Destination host unreachable Trying tracert from a desktop gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 <1 ms * <1 ms MYSERVER [192.168.2.1] 2 * * * Request timed out. 3 6 ms 6 ms 6 ms dsl-gw1.ge.mer.uk.webtapestry.net [217.151.111.17] 4 38 ms 239 ms 251 ms gw-router.ge.mer.uk.webtapestry.net [217.151.111.13] ...and then all is fine after that. I think that DNS is working fine because the domain names are getting translated to correct IPs immediately. DHCP seems to be okay? So perhaps it's something up with my RRAS setup - although I can't see any option during the setup wizard which I would have filled in differently. I've also tried changing the binding order of the two network connections, to prioritise MyWAN, but that doesn't seem to have done anything. Any idea what's up? Many thanks - Rob

    Read the article

  • unusual webpage access problem

    - by user28163
    This is one of the weirdest problems I've ever seen and I'm out of ideas. I cannot access a couple of websites from my home pc (for 3-4 days now), or at least they go really really slow ~700b/s I can access these same websites fine from my laptop from same IP address. - The websites originate from different countries and are huge popular sites. - I have tried both my PC's network cards. - I have reformatted my PC. - I have reset my router to factory settings. - I have created virtual computers on my PC, and from inside those I cannot access the webpages. - I have flushed my dns. - I tried specifying my dns server addresses to 8.8.8.8 and 8.8.4.4. I can only access the webpages using my PC, if I first connect to an outside VPN. Again, these sites work fine on the 2 other pcs in this house (same ISP and internet connection). help plz :)

    Read the article

  • Allow from referer for HTTP-basic protected SSL apache site

    - by user64204
    I have an apache site protected by HTTP basic authentication. The authentication is working fine. Now I would like to bypass authentication for users that are coming from a particular website by relying on the HTTP Referer header. Here is the configuration: SetEnvIf Referer "^http://.*.example\.org" coming_from_example_org <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Deny from all Allow from env=coming_from_example_org AuthName "login required" AuthUserFile /opt/http_basic_usernames_and_passwords AuthType Basic Require valid-user Satisfy Any </Directory> This is working fine for HTTP, but failing for HTTPS. My understanding is that in order to inspect the HTTP headers, the SSL handshake must be completed, but apache wants to inspect the <Directory> directives before doing the SSL handshake, even if I place them at the bottom of the configuration file. Q: How could I workaround this issue? PS: I'm not obsessed with the HTTP referer header, I could use other options that would allow users from a known website to bypass authantication.

    Read the article

  • Why doesn't my Droid phone charge when connected to a powered USB hub that is not connected to my computer?

    - by pkaeding
    I notice that my new Motorola Droid phone charges perfectly fine when I connect it to my computer via the USB cable, or if I connect it to a car cigarette lighter-USB adapter, or a wall power-USB adapter. It also works fine when I connect it to a powered USB hub that is connected to my computer. However, if that same powered USB hub is not connected to my computer when I connect the phone, it does not charge. If I connect the computer to the hub, and then connect the phone to the hub, it will charge. If I then disconnect the computer from the hub, the phone will continue to charge. Does anyone know why this is happening, or what I can do to be able to charge my phone from a powered hub, without my computer being present?

    Read the article

  • After virus, IE and Chrome don't work but Firefox does.

    - by Erich
    I recently got rid of a virus on my laptop. Afterwards everything seems to be working fine except for some internet connectivity problems. Internet Explorer and Chrome won't display an webpages, Firefox does but I can't update it to the most recent version. I've also noticed that some of the gadgets on Google Gadgets don't work properly. My internet connection is working fine, especially since I can get to websites via Firefox. I have tried to re-install IE and Chrome, but there was no change. What has caused this and how can I fix it?

    Read the article

  • Output to TV only works if monitor is plugged in

    - by Greg Sansom
    I am trying to use my TV as the sole output for a computer. The computer has a graphics card with 2 outputs - one RGB and one DVI. I have the RGB output going to the TV, and when the DVI output is connected to a monitor, display works fine on both the monitor and the TV. If I turn off the monitor, or even turn off power to the monitor, the TV continues to display the desktop. If I unplug the DVI cable from the monitor (remember that the monitor doesn't have any power at this point), the TV stops presenting the desktop and displays a "Not Accepted" message. When starting up the computer, the TV displays fine, but stops working at the "press ctrl-alt-delete" screen unless the monitor is connected. How can I make the TV show the display without the monitor? The TV is an LG RT-42PZ45V. The graphics card is an ATI Radeon series HD4350 512MB GDDR2. The computer is running Windows Server 2008 r2.

    Read the article

  • Start jade via batch script as service on windows server 2012 amazon ec2 instance

    - by E. Lüders
    I would like to start the Jade agent platform with a batch script on an windows server ec2 instance as a service. The reason for this is, that I want to start jade automatically at system startup. For creating the service I use nssm. However so far its working fine and the service is created. When I want to start the service I get an error message: Windows could not start the NAME service on Local Computer. The service did not return an error... My batch file contains only one line: java jade.Boot -platform-id P%random% If i execute the script via cmd it works fine. Anybody got an idea why this is not working if I start the batch script as a service?

    Read the article

  • Laptop monitor goes black under intense graphics

    - by drahcir
    I have a dell inspiron 1520 with a nvidia GeForce 8600M GT video card. I have Windows 7 professional as an operating system. Yesterday when I was using it the screen started to somewhat flicker then go completely black. I restarted it and in the boot screen everything seems fine, when I entered the login screen it became flickery again, and when I logged in, when a couple of windows popped up it went black again. I hooked it up to a tft monitor and the monitor works fine, and did some more tests that confirmed that under higher graphics causes the laptop monitor to go black. Is there a reason why this is happening?

    Read the article

  • DFS replication initial step problem

    - by vn.
    I just setup DFS on my network and it's working fine, and now I'm trying to setup DFS-R on a test folder, but then at the end of the procedure (all went fine, selected my 2 folders, primary folder, replication topology and such) I get this error message (roughly translated from french) : Unable to define security on the replicated folder. The shared administration folder doesn't exist. I'm also wondering if there's any required security on the folders to replicate so that DFS-R can access it. I was trying to add SYSTEM in the security, but it won't find it/allow me. The folder has many many files and folders on the primary DFS pointer, but none on the 2nd, just created it with quite the same rights. Note that the primary DFS pointer is on a 2008 server and the DFS service and the secondary DFS pointer are on a 2008r2. Any help is very appreciated, thanks.

    Read the article

  • How do I keep multiple copies of Outlook in sync when using RPC over HTTP?

    - by Don
    I use Outlook 2007 at work with our Exchange 2003 server. I just setup my home system with Outlook 2007 so that I could use the RPC over HTTP to access Exchange without having to use a VPN. It works fine. I can get mail, send mail, etc. What it doesn't seem to be doing is staying in sync. For example, I read a few messages at home, moved them into different folders from the Inbox, etc. That all seemed fine. When I login to my work machine and look at the copy of Outlook there, the mail is still unread and nothing has been moved. Am I missing something simple here? I would have to assume that my home machine should be telling Exchange where these messages belong and that they've been read. Both machines are running Windows 7, if that matters. Ideas?

    Read the article

  • Exchange Public Folders in Snow Leopard Mail.app

    - by W_P
    I am using Mail.app (running snow leopard) to connect to my email account on my school's Exchange 2007 server. I get my Inbox just fine, and iCal connects to my Outlook Calendar just fine, but I cannot seem to get any of the Exchange Public Folders that I can automatically see when I am using Outlook on a Windows box. The Account Type is shown as "Exchange 2007" I did not have any luck Googling this problem, in fact most of the results I saw were dealing with the opposite problem: Remove MS Exchange Public Folders I am aware that my question is a duplicate of this: http://superuser.com/questions/103115/apple-mail-app-all-exchange-folders-not-visible but since that question did not get any responses, I am reposting.

    Read the article

  • Simplest way to expose UNIX mailboxes via IMAP or POP3 on RHEL 5.6

    - by db2
    We've got a web server running RedHat Enterprise Linux 5.6, and it has all the usual local UNIX mailboxes. As is typical, the root mailbox gets all the cron output, logwatch results, etc. I'd like an easier way to keep an eye on this mailbox besides running mail via ssh. What should I install/enable to allow access to these system mailboxes via IMAP or POP3 with minimal fuss? Either protocol would be fine for what I'm doing, as I could then add it as an account in Outlook. A bit of searching led me to cyrus-imapd and dovecot, but it seems like they are meant for more serious mail hosting operations. Either they use their own mailbox system exclusively, or don't have a simple way of making the UNIX mailboxes available. If I'm wrong about that, then I'm fine with using either of them as long as I can get to the mailboxes of the existing accounts on the box.

    Read the article

  • Are animated GIFs supported in Google Chrome?

    - by user30852
    I have recently been testing a website and found animated gif images that seem to show fine in IE and Firefox but in Google Chrome they only show briefly and then dissapear! This happens if I view the image on the page or view the file directly. Are there any reported problems in displaying GIFs in Chrome, or is it just being fussy? There seemed to have been some problems in older versions of Chrome, but it's hard to believe something as simple as this wouldn't have been fixed by now. The version of Google Chrome I am using is: 4.1.249.1021 Not sure if this is relevant, but some info about the image: Width: 216 pixels Height: 36 pixels Horizontal resolution: 96dpi Vertical resolution: 96dpi Bit Depth: 32 Frame Count: 3 EDIT: Seems to be a problem relating to the latest beta version of Chrome, as it works fine in 4.0.249

    Read the article

  • Zimbra Relaying from Postfix connection timed out sending multiple emails?

    - by liamTc
    I have a web server setup with postfix which is relaying email to a zimbra server. This working fine however I have attempted to send a few thousand emails and now the connection from postfix to zimbra is timing out. All of the emails have been deferred on the postfix queue. If I try to send individual emails from postfix to zimbra it works fine. But if I try to flush the postfix queue all of the emails time out. In mail.log the emails look like this: postfix/error[2494]: 32B0950C04: to=, relay=none, delay=19431, delays=19402/29/0/0.01, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to mail.server.com[123.45.678.91]:25: Connection timed out) I have also noticed that in the above message it says "relay=none" for these emails that are failing. But the emails that do send say "relay=domainname.com". How I can resolve this, by sending the emails in the queue and avoiding this from happening again?

    Read the article

  • Cannot connect to WEBrick on home network

    - by Chris Stewart
    I'm an Android developer and often my applications require server-side code. I typically use Ruby on Rails for the web app, and during development will run the server on my local machine (Mac OS X) with WEBrick. In the morning when I get to the office, I'll run ifconfig in the console to see what IP my laptop has been given that day. I'll use that IP in my Android app when making requests to the web app in question. This all works fine, when I'm in my office. When I get home, I attempt to do the same thing, find my laptop's IP via ifconfig, set it in my app's config file, but the destination can never be found. To exclude my app from the set of hurdles, I attempt to visit the web server IP (e.g., http://192.168.1.4:3000) from my phone's browser, and it cannot connect. If I try from my laptop, which is running the web server, it works fine. If I try from another machine, on the same network, it also is unable to connect. Given this, I think I've narrowed it down to some kind of configuration in my home network, but I frankly have no idea what the cause could be. I don't have anything special at home, your basic Verizon FiOS router/modem with everything connected via Wi-Fi (Wi-Fi for both phone and laptop at work as well, fyi). I've tried disabling the firewall on my Verizon router, enabling port forwarding, and just about everything else I could do for port 3000, and nothing has changed. Dear Server Fault geniuses, please help a poor developer out. :) Edit: Some follow up items to add. My Mac's firewall is not active, and all incoming requests are allowed. I've also verified on my phone and laptop, that they're on the same network (192.168.1.4 Mac, 192.168.1.9 Phone). I have no idea why this isn't working. Edit 2: I went into System Preferences, enabled Web Sharing, and tried to view the website from my phone and it didn't connect. So it's not WEBrick or related to Rails. The firewall on my machine is off and the firewall on my router is off. Edit 3: Some progress. I set up port forwarding for port 3000 to my laptop, found the external IP, and used that and it connected fine. So, there's definitely something not quite set up correctly on my internal network.

    Read the article

  • Fixing restore active desktop on windows xp

    - by Rachel Nark
    I've already tried this: http://answers.microsoft.com/en-us/windows/forum/windows_xp-desktop/windows-xp-will-not-restore-my-active-desktop/f664bfe4-0acd-4b11-8918-eb779bb2cc07 had no luck. All I know is that the computer crashed from a power outage. I've tried clicking the restore button and rebooting. Nothing. What else is there to try? Would like to have the desktop back. It powers on fine. I can login and use windows just fine. Just you get that annoying restore active desktop screen.

    Read the article

  • Weird problem, special characters after formatting the hard drive, computer not starting 0_o

    - by m3taspl0it
    Hya friends , Last night my computer was working fine. But today when i came back from college and started it , it was starting fine but after sometime it's getting restarted , again and again getting restarted at different points , so i tried to boot it in safe mode but same problem. Now after all this , i finally decided to format the drive C (it is in 80 GB) and load new OS windows XP3. After formatting and loading xp3 sufficient files , when it was getting rebooted for copying the actual os files , it hung and a weird screen came. I've also attached the pic of error : http://www.postimage.org/image.php?v=gxz1vKS My specs : P4 3.0 Ghz 2 GB RAM (2x 512 mb and 1 GB) 3 hard drives { 80 GB (5 years old around) 320 GB ( 2 years old around) 500 GB ( recently bought) 256 MB graphics card any help is very appreciated , thanks

    Read the article

  • hyper-v server 2003 instance using internet connection sharing disconnects remote desktop to hyper-v host

    - by Joseph Southwell
    I have a windows server 2003 R2 instance running in a hyper-v instance on windows 8. I have setup an internal switch that uses internet connection sharing to get out to the internet. It works fine except for when I try to do windows update on the server 2003 instance it disconnects my remote desktop session to the windows 8 hyper-v host. When I reconnect it says windows update failed. I know that sounds crazy but I have tested it over and over again. If I change the instance to use my external switch (I have an external switch defined on another network adapter) windows update works fine.

    Read the article

  • iPhone always assigned wrong ip

    - by Ashley Ray
    for some reason most of the time my iPhone connects to the home network the ip address seems wrongly assigned as it 'loses connection' even even with strong reception. If I change the ip address to a static from 168.2.10 to 168.2.15 works fine until it appears to renew back to the prior. I am using a power-plug extender from the modem to router. Then have a laptop Printer playstation tv and another iPhone that always connect fine. The modem also has a crappy wireless which I haven't connected any devices to. I'm sure the forum will have a simple answer!

    Read the article

  • Debian Linux server hangs after a week or so

    - by Alex Flo
    I have 2 Debian Linux 6.0.4 servers that have a strange behaviour: after 5-7-10 days they hang. By this I mean the servers need to be restarted and before that ping won't answer. I've been struggling with this problem for a couple of months now and here's some thoughts/what I tried without being able to solve the problem. I changed the RAM on a server. Being 2 different servers I doubt that it could be something related to hardware as a 3rd identical server won't have this problem. I logged the server load and when it crashes the load is fine (quite low) I cannot find anything in the server logs, logs are fine till the server freezes. I don't have access to console unfortunately. While I have years of admin experience I have never encountered such an issue and right now I have no idea where else to investigate. If you have an idea of what I could try in order to fix the problem please share it with me:-)

    Read the article

  • Windows 8 Unable to perform hibernate

    - by Jones
    Windows 8 Enterprise edition x86. Already enabled hibernate option, to have it on shutdown menu (start menu?) and set to hibernate on lid closing. However it's not hibernating for me. When I'm trying to sleep, it's sleep fine and wake up like a kid. But when I'm demanding hibernate, it disconnects internet, turn off screen and be back to lock screen in one second. Steps I've tried. Complete shutdown Clear hiberfile.sys by disabling and enabling back Resetting my power settings. Causes I suspect: Had dual boot with BackTrack with Windows 8 GUI boot manager. It was fine until I reinstall BackTrack, bootmgr resetted and I'm in Ubuntu boot menu;. Using additional hard disk through USB cable.(But it's not a problem before few days, however) How to make my system to hibernate and wakeup again.

    Read the article

  • Symantec CPS / Backup Exec 11D Service stuck in "Starting" Status

    - by user42289
    I have two Windows 2003 (one is SE, one is SBS) both SP2, both are Virtual Machines of Microsoft Virtual Server 2005 R2. All of a sudden about 2 weeks ago, the Symantec Backup Exec / CPS 11D stopped working on them. One is the Media server, one is our Exchange 2003 Server. There is another copy of CPS on our file server that the service is running fine on. However the one that is fine is not a VM. When I say stop working, the "backup exec continuous protection agent" service is stuck in "starting" status. On the non Exchange server I've tried uninstalling the last Windows Updates that were run some time around the time of failure. I've tried repairing the install of CPS. I've tried uninstalling it and reinstalling. Exact same problem in the end.

    Read the article

  • Time Machine/iMac loses all trace of external hard drive after a few days

    - by Bill
    First time posting, also a Mac newbie (recent windows convert) so I'm hoping I can get some help here :) I have a Hitachi Deskstar drive in an external casing that I got from ebuyer. (its one of those unknown fairly cheapish enclosures) connected via firewire. I hook it up and it works fine, but then at some point over the next week or so I'll realise that my last update was 3 days ago or so. At this point the Mac will not recognise the drive as existing and the only thing to do is switch off and on the external enclosure. It then works fine for a while. If I had to guess I'm assuming its powering down or something when the Mac goes into standby? Is there anyway to solve this?

    Read the article

  • Windows Server 2008 R2 DNS Server not working?

    - by wolfvilleian
    I have a server running Windows Server 2008 R2 hosting a DNS server, exchange 2010 and is a domain controller. One computer on the network (and domain) can ping the server 25% of the time, also when I try to ping it's own hostname it also does not work. However another computer that is on the domain can ping it fine, and another computer on the network but not domain can ping fine as well. The computer that cannot ping the server is setup to use the DNS server running on the server only (secondary dns points to nothing) and it will resolve the hostname of the server to the external IP not internal when the other two computers correctly resolve the internal All 3 computers and server are connected directly into the same switch. Does anyone have any ideas on how to fix this? Thanks

    Read the article

  • Outlook 2010 Error

    - by Trevor Sullivan
    I'm running Outlook 2010 SP1 on Windows 7 x64 SP1, and I'm getting an error message saying "Your Microsoft Exchange administrator has blocked the version of Outlook that you are using. Contact your administrator for assistance." I'm still able to log into my account using Outlook Web Access (OWA), so I know that my account is working just fine. Outlook 2010 with Service Pack 1 is the standard for Windows 7 client systems at this organization, and other people are able to access their e-mail just fine. When my account was initially configured, I was able to use Outlook for a couple of days, and then it suddenly stopped working, providing only the above error message. Do you have any ideas on what I should look into to resolve this problem? Is there any information I can obtain on the client side that will help the Exchange folks investigate the issue further? Is there any verbose logging I can enable, or diagnostic logging in Outlook? Cheers

    Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >