Search Results

Search found 19975 results on 799 pages for 'disk queue length'.

Page 642/799 | < Previous Page | 638 639 640 641 642 643 644 645 646 647 648 649  | Next Page >

  • Ubuntu 9.04: Ripping CDs with grip?

    - by chris
    I tried to rip a CD tonight, and couldn't figure out how to configure grip - /dev/cdrom doesn't seem to be the mount point for music CDs any more. How can I configure grip to find CDs? Update: /etc/fstab has /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 But there's nothing visible in /media/cdrom0 (or /media/cdrom, which is a symlink to cdrom0) There's an icon on the desktop labeled "Audio Disk" and opening it shows the .wav files on the CD. The location is cdda://sr0/, but grip doesn't like that either. Trying to manually mount /dev/sr0, I get $ sudo mount -t auto /dev/sr0 foo/ mount: block device /dev/sr0 is write-protected, mounting read-only mount: you must specify the filesystem type Update 2: Tried to change the media handling preferences (From a file browser, Edit-Preferences, Media, CD Audio) to "Do Nothing". CD Still doesn't mount. Update 3: With an audio CD in the drive: $ ls -l /dev/ | grep cd lrwxrwxrwx 1 root root 3 2009-09-15 22:13 cdrom1 -> sr0 lrwxrwxrwx 1 root root 3 2009-09-15 22:13 cdrw1 -> sr0 drwxr-xr-x 2 root root 60 2009-09-15 22:13 pktcdvd lrwxrwxrwx 1 root root 3 2009-09-15 22:13 scd0 -> sr0 crw-rw----+ 1 root cdrom 21, 2 2009-09-15 22:13 sg2 brw-rw----+ 1 root cdrom 11, 0 2009-09-15 22:13 sr0

    Read the article

  • VMWare ESXi 5 - Expanded RAID 5 array - cannot access datastore

    - by Dayton Brown
    I'm using VMWare ESXi 5 and had a 2 TB RAID 5 setup on an HP DL360 with a P400i RAID card. I added two more 1 TB drives and using the SmartStart ACU, added the drives and expanded the logical disk. Now after booting back to ESXi, the server boots, but lists no available persistent storage. I've rescanned multiple times to no avail: the Datastore doesn't show up. I booted to GParted and the 1.8TB partition shows up, but it shows as unknown. Anyone have any good ideas? EDIT: Final Solution So after much gnashing of teeth, it was fairly simple to solve. I purchased an eSata 2 TB external drive and a PCI eSata card for my server. I then used Clonezilla to image the current partitions to my new external drive. You have to check "don't check drive sizes" in advanced mode, otherwise it will yell at you for have a smaller drive. For some reason my PCI card wouldn't boot on my HP server, so I hooked the drive up to another desktop I had, booted to VMWare, and copied the vmdk's to another drive. I'm going to blow out the RAID config and then create 1.5TB logical drives.

    Read the article

  • How can I automatically synchronize a directory tree on multiple machines?

    - by Blacklight Shining
    I have two Mac laptops and a Debian server, each with a directory that I would like to keep in sync between the three. The solution should meet the following criteria (in rough order of importance): It must not use any third-party service (e.g. Dropbox, SugarSync, Google whatever). This does not include installing additional software (as long as it's free). It must not require me to use specific directories or change my way of storing things. (Dropbox does this IIRC) It must work in all directions (changes made on /any/ machine should be pushed to the others) All data sent must be encrypted (I have ssh keypairs set up already) It must work even when not all machines are available (changes should be pushed to a machine when it comes back online) It must work even when the /directories/ on some machines are not available (they may be stored on disk images which will not always be mounted) This can be solved for Macs by using launchd to automatically launch and kill (or in some way change the behavior of) whatever daemon is used for syncing when the images are mounted and unmounted. It must be immediate (using an event-based system, not a periodic one like cron) It must be flexible (if more machines are added, I should be able to incorporate them easily) I also have some preferences that I would like to be fulfilled, but do not have to be: It should notify me somehow if there are conflicts or other errors. It should recognize symbolic and hard links and create corresponding ones. It should allow me to create a list of exceptions (subdirectories which will not be synced at all). It should not require me to set up port forwarding or otherwise reconfigure a network. This can be solved by using an ssh tunnel with reverse port forwarding. If you have a solution that meets some, but not all of the criteria, please contribute it in the comments as it might be useful in some way, and it might be possible to meet some of the criteria separately. What I tried, and why it didn't work: rsync and lsyncd do not support bidirectional synchronization csync2 is designed for server clusters and does not appear to work with machines with dynamic IPs DRBD (suggested by amotzg) involves installing a kernel module and does not appear to work on systems running OS X

    Read the article

  • Old scheduled task still being started, but can't find it.

    - by JvO
    System: Windows XP Home Summary: Some scheduled task is still being started by Windows, but I can't find it, nor determine where its configuration has been stored. This is turning into a mystery for me... I set up a Windows XP Home machine to run a task at 7:00 AM, using the Task manager. This was a clean install, no users defined, so you got straight to the desktop after starting the machine. The filesystem uses NTFS. Later on, I needed to introduce users, so I created one (named Sam) with administrator privileges. After this I noticed that the scheduled task failed, most likely due to privilege errors (i.e. can't write to a network drive). So I want to delete the old task, and add it again with the correct user credentials. However.... I can't find the old task!! I know it is still being executed at 7:00 AM, but there's no mention anywhere on the system of this task. I've looked in c:\windows\tasks for .job files, but there's only the "MP Scheduled Scan.job" from Security Essentials. I've searched the whole disk for mention of the batch file that is being run, but can't find it. So why is this old task still running, and more importantly, why can't I find it? Would it have something to do with introducing users on XP?

    Read the article

  • Photoshop CS5 performance over network drive (cifs)

    - by grub
    Hello Everyone I did install a QNAP NAS TS410 for a customer (professional photographer) with 3 Hitachi Deskstar 7200rpm 2TB disk configured as RAID5. The NAS and the workstations are connected over a Gigabit network. He and his co-worker are accessing the photos (about 1TB of photos) over a mapped network drive from their windows machines (Windows XP - 32bit and Windows 7 Ultimate - 32bit). Both are using Photoshop CS5 to edit the photos. The problem is that to save a edited photo takes a really long time, it takes about 3 times as long to save a photo as to open it. After some tests I can exclude the network, the NAS and the windows machines as source of the issue. I think the problem is the Photoshop software and its handling of the network drives. Officially network drives are not supported by Adobe. I do not have any experience with the Adobe products, especially with Adobe Photoshop CS5. What are your recommendation to solve the performance issue? Should my customer copy the photos to the local drive, edit them and upload them again to the network drive or is Adobe Drive or Adobe Version Cue the answer? One requirement is that the photos need to be accessible / editable from both computers even when one of them is offline. Adobe Version Cue needs a dedicated service running to be usable, so this solution is not possible as far as I understand the Cue software. Thank you for your input to this issue and have a nice day :-) Greetings grub

    Read the article

  • Why is windows not able to create a system partition?

    - by hughes
    I'm reinstalling Windows 7 64 bit, and I encountered an issue I've never seen before. I have a legit copy of Win 64 Professional, and I've installed it probably a half dozen times on this machine in the past without a problem. Googling the error only brings me to issues with people who are upgrading to win7. The drive itself seems to not have a problem. I can mount it on other systems and I can create an NTFS partition on it on other machines. I can install Ubuntu on it without any issues. Additionally, if I try using my alternate backup hard drive, the installer gives the same error. I have run diskpart from the setup page and clean seems to report that all is well. However, I cannot get past the screen below, which says Setup was unable to create a new system partition or locate an existing system partition. This happens regardless of whether or not the disk space is already allocated. What is causing this? How do I solve or get past this?

    Read the article

  • Empty rewrite.log on Windows, RewriteLogLevel is in httpd.conf

    - by ripper234
    I am using mod_rewrite on Apache 2.2, Windows 7, and it is working ... except I don't see any logging information. I added these lines to the end of my httpd.conf: RewriteLog "c:\wamp\logs\rewrite.log" RewriteLogLevel 9 The log file is created when Apache starts (so it's not a permission problem), but it remains empty. I thought there might be a conflicting RewriteLogLevel statement somewhere, but I checked and there isn't. What else could cause this? Could this be caused by Apache not flushing the log file? (I closed it by hitting CTRL-C on the httpd.exe command ... this caused the access logs to be flushed to disk, but still nothing in rewrite.log) My (partial) httpd-vhosts.conf: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName my.domain.com DocumentRoot c:\wamp\www\folder <Directory c:\wamp\www\folder> Options -Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule . everything-redirects-to-this.php [L] </IfModule> </Directory> </VirtualHost>

    Read the article

  • How can I upgradge from Ubuntu Intrepid Ibex 8.10 to Jaunty 9.04 when old-releases no longer has the necessary packages?

    - by tommy chheng
    I changed my sources.list to: deb http://old-releases.ubuntu.com/ubuntu/ intrepid main restricted universe multiverse deb http://old-releases.ubuntu.com/ubuntu/ intrepid-updates main restricted universe multiverse deb http://old-releases.ubuntu.com/ubuntu/ intrepid-security main restricted universe multiverse I tried installing sudo apt-get install update-manager-core but i get this error: 1 upgraded, 3 newly installed, 0 to remove and 40 not upgraded. Need to get 2506kB/2555kB of archives. After this operation, 4346kB of additional disk space will be used. Do you want to continue [Y/n]? Y Err http://old-releases.ubuntu.com intrepid-updates/main update-manager-core 1:0.93.34 404 Not Found Err http://old-releases.ubuntu.com intrepid-security/main dpkg 1.14.20ubuntu6.3 404 Not Found Failed to fetch http://old-releases.ubuntu.com/ubuntu/pool/main/d/dpkg/dpkg_1.14.20ubuntu6.3_amd64.deb 404 Not Found Failed to fetch http://old-releases.ubuntu.com/ubuntu/pool/main/u/update-manager/update-manager-core_0.93.34_amd64.deb 404 Not Found E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Running apt-get update or --fix-missing returns the same errors. How can I successfully upgrade from Intrepid Ibex to Jaunty 9.04?

    Read the article

  • What's throttling the database?

    - by Troels Arvin
    Hardware: Intel x86_64 with 192GB of RAM. OS: CentOS 5.4 x86_64. DBMS: DB2 v. 9.7.1 64 bit. During certain special workloads (e.g. parallel REORGs/RUNSTATs), I've seen the server transporting 450MB/s with 25000IO/s (yes, there is probably some storage system caching happening here) while all CPU cores were happily working in an even mix of usermode/wait. And disk benchmark tools can also bring some very satisfying bandwith and IO/s numbers to the table. On the other hand, we also have another scenario: A single rather complex query with at least one large table scan. db2's "list applications" reports that the query is Executing (not locked). IO: At most 10MB/s, 500 IO/s; CPU: two cores in 99.9% wait state, all other cores 100% idle. The tables which the query reads from have been altered to have LOCKSIZE=TABLE, so I would think that lock list work is zero. What's going on in such a situation? What tools/snapshots/... can I use to gain better insight in such a case?

    Read the article

  • NFS-shared file-system is locking up

    - by fredden
    Our NFS-shared file-system is locking up. Please feel free to ask any questions you feel relevant. :) At the time, there are a lot of processes in "disk sleep" state, and the load averages on our machines sky-rocket. The machines are responsive on SSH, but our the majority of our websites (apache+mod_php) just hang, as does our email system (exim+dovecot). Any websites which don't require write access to the file-system continue to operate. The load averages continue to rise until some kind of time-out is reached, but for at least 10-15 minutes. I've seen load averages over 800, yet the machines are still responsive for actions which don't require writing to the shared file-system. I've been investigating a variety of options, which have all turned out to be red-herrings: nagios, proftpd, bind, cron tasks. I'm seeing these messages in the file server's system log: Jul 30 09:37:17 fs0 kernel: [1810036.560046] statd: server localhost not responding, timed out Jul 30 09:37:17 fs0 kernel: [1810036.560053] nsm_mon_unmon: rpc failed, status=-5 Jul 30 09:37:17 fs0 kernel: [1810036.560064] lockd: cannot monitor node2 Jul 30 09:38:22 fs0 kernel: [1810101.384027] statd: server localhost not responding, timed out Jul 30 09:38:22 fs0 kernel: [1810101.384033] nsm_mon_unmon: rpc failed, status=-5 Jul 30 09:38:22 fs0 kernel: [1810101.384044] lockd: cannot monitor node0 Software involved: VMWare, Debian lenny (64bit), ancient Red Hat (32 bit) (version 7 I believe), Debian etch (32bit) NFS, apache2+mod_php, exim, dovecot, bind, amanda, proftpd, nagios, cacti, drbd, heartbeat, keepalived, LVS, cron, ssmtp, NIS, svn, puppet, memcache, mysql, postgres Joomla!, Magento, Typo3, Midgard, Symfony, custom php apps

    Read the article

  • How do I force a restore over an existing database?

    - by Ian Boyd
    I have a database, and i want to force a restore over top of it. I check the option: Overwrite the existing database (WITH REPLACE) But, as expected, SSMS is unable to overwrite the existing database. Of course i don't want different filenames; i want to overwrite the existing database. How do i force a restore over an existing database? And for Google search crawler: File '%s' is claimed by '%s'(4) and '%s"(3). The WITH MOVE clause can be used to relocate one or more files. RESTORE DATABASE is terminating abnormally. (Microsoft SQL Server, Error: 3176) Update The script (before i deleted the database, because i needed to get it done) was: RESTORE DATABASE [HealthCareGovManager] FILE = N'HealthCareGovManager_Data', FILE = N'HealthCareGovManager_Archive', FILE = N'HealthCareGovManager_AuditLog' FROM DISK = N'D:\STAGING\HealthCareGovManager10232013.bak' WITH FILE = 1, MOVE N'HealthCareGovManager_Data' TO N'D:\CGI Data\HealthCareGovManager.MDF', MOVE N'HealthCareGovManager_Archive' TO N'D:\CGI Data\HealthCareGovManager.ndf', MOVE N'HealthCareGovManager_AuditLog' TO N'D:\CGI Data\HealthCareGovManager.ndf', MOVE N'HealthCareGovManager_Log' TO N'D:\CGI Data\HealthCareGovManager.LDF', NOUNLOAD, REPLACE, STATS = 10 I used the UI to delete the existing database, so that i could use the UI to force an overwrite of the (non)existing database. Hopefully there can be an answer so that the next guy can have an answer. No, nobody was in the context of the database (The error message from other connections is quite different from this error, and i only got to see this error after i killed the other connections).

    Read the article

  • "What happens?" server performance monitor

    - by AlexAtNet
    Hello! After reviewing some thread about server monitoring software I end up with a simple question: Which of the server monitoring tools should I use for automatic detection of "abnormal" situations with recommendations on how to fix them? I look for software that checks the system performance after installation and calculate some average load values (memory, CPU, etc). And when something happens (CPU load is increased to 20%) then it tries to detect a reason for this. If it is apache, it should check for access logs. If mysql, it should check mysql logs and tell me what happens. It this is because some user decodes a lot of images, I'd like to know which command is executed, when and user name. The same for disk usage, memory, number of processes, threads and so on. Ideally, this software should periodically checks the system and report problems: errors in PHP error log, outdated packages, security vulnerabilities. In other word I'm looking a software that will keep my simple Debian/Apache/PHP/MySQL server without forcing me to monitor the charts every day. I hope that such program exists. Thanks, Alex

    Read the article

  • Replace Linux Boot-Drive | ext3 to btrfs

    - by bardiir
    I've got a headless server running Debian Linux currently. Linux vault 3.2.0-3-686-pae #1 SMP Mon Jul 23 03:50:34 UTC 2012 i686 GNU/Linux The root filesystem is located on an ext3 partition on the main harddrive. My data is located on multiple harddrives that are bundled to a storage pool running with btrfs. UUID=072a7fce-bfea-46fa-923f-4fb0827ae428 / ext3 errors=remount-ro 0 1 UUID=b50965f1-a2e1-443f-876f-578b5f93cbf1 none swap sw 0 0 UUID=881e3ad9-31c4-4296-ae60-eae6c98ea45f none swap sw 0 0 UUID=30d8ae34-e2f0-44b4-bbcc-22d761a128f6 /data btrfs defaults,compress,autodefrag 0 0 What I'd like to do is to place / into the btrfs pool too. The ideal solution would provide the flexibility to boot from any disk in the system alike, so if the main drive fails I'd just need to swap another one into the main slot and it would be bootable like the main one. My main problem is, everything I do needs to result in a bootable system that is open to ssh logins via network as this server is 100% headless so there is no possibility to boot it from a live cd or anything like that. So I'd like to be extra sure everything works out fine :) How would I best go about this? Can anybody hint me to guides or whip something up for these tasks? Anything I forgot to think about? Copy root-data into btrfs pool, adjust mountpoints,... Adjust GRUB to boot from btrfs pool UUID or the local device where GRUB is installed Sync GRUB to all harddrives so every drive is equally bootable (is this even possible without destroying the btrfs partitions on the drives or would I need to disconnect the drives, install grub on them and then connect them back with a slightly smaller partition?)

    Read the article

  • Flash Backed Write Cache (FBWC) without capacitor pack

    - by Martyn
    I brought a HP Smart Array P410 controller and it is installed and working fine in a HP Prolient Microserver with 4 drives in two RAID 1 arrays. I didn’t realise however that it came without any cache so would only work by directly writing straight to the disk, and the performance was horrible. So I then brought the 512MB Flash Backed Write Cache (FBWC) memory module as I was under the impression that with FBWC I would not need a battery. I got this idea from a forum post. "What do you guys think of the choice between 'BBWC' (battery backed write cache) and 'FBWC' (flash backed write cache)? The flashed based ones use non-volitile memory so need no battery." After installing the cache module however the server pretty much won’t boot. The P410 has a flashing amber light on it, and from the manual that doesn’t sound good. I’ve managed to get to the on board BIOS once and even managed to get to boot to the HP Array Configuration Utility (ACU) CD once, but every other time the Server continuingly reboots once it get to the POST screen and reads ARRAY INITILIZING %%%. The one time I reached the ACU, it reported a problem with the Cache Module. To me, it seems like the cache module is faulty, however the supplier tells me “Do you have an FBWC battery pack, p/n 587324-001, because that is required for the cache to work. If you have it, please complete an RMA form and we'll send a replacement / credit.” Does this sound right to you? I’ve been ordering the parts from the US and I don’t want to spend $77 + $40 p&p on a battery, wait a week for the shipping to find the card is faulty, and I don’t want to send back a working card?

    Read the article

  • Weird Apache behaviour and with files again

    - by afifio
    Hi and thanks for stopping by. I have read Weird Apache problem with file, I have read Weird Apache problem with file ...and its not the problem Setup single XAMPP installation on Windows, single windows user, 2HD, 1 is a portable USB. All is fine, until I move the xampp to new portable HD Symptom Old php files - works fine, new one doesnt http://127.0.0.1/Ajax/index.php - yay http://127.0.0.1/test2/t.php - display the source code http://127.0.0.1/Ajax/test2/t.php - display the source code http://127.0.0.1/Ajax/t.php - display the source code Extra Info IIS+MS Web Development stuff, .NET4, Asp, etc is being installed and still hast reboot yet. .htaccess also seems doesnt work Apache2 conf file was modified to Averride All and still it doesnt care. One of the directory supposed to treat .htm as php yet got text, created another directory and edit a phpinfo, still another text, browse to phpmyadmin, viola, works fine Suspect Does Apache honour XP security and permission ? If so, this is a single user computer. Does Apache dont like my new hard disk/new place ? Why it doesnt execute the php in new directory but happily execute in old folder ? Thanks for the riddle answers

    Read the article

  • External HDD incorrectly detected as internal - how change to enable hot swap/eject?

    - by Sam
    I have win 7 x64 Home Prem. The HDD is a seagate barracuda, 7200.7 ST3120827AS. 3.5", Serial: 3ms006n6, Firmware: 3.42 (no further updates) NexStar CX External case (drivers installed). I have three drives: WD320 with OS installed WD750 data storage (internal) seagate 120 (external) - connected via esata board connected to sata on motherboard (MSI p43 neo) Tried uninstalling HDD in device manager to no effect. Also the internal WD750 is detected as an external drive and win taskbar icon allows for it to be ejected (unlike the seagate). All drives are configured - Online, Simple, Basic, NTFS, Active, Primary Partition (except c drive). The seagate was previously used as a primary disk with XP operating system so I deleted the volume and created/reformatted (not quick). HDD is no longer "Active". But did not fix problem. Background Originally, I installed win 7 with the bios set to IDE and forgot to install the chipset drivers. Then I changed win 7 to install the AHCI drivers, changed the bios to AHCI and rebooted. Win 7 loaded drivers but WD HDD gave problems/crashed. I installed chipset drivers and latest intell storage matrix software thingie (in safe mode). Everything worked fine after that except for the problem of not corrrectly detecting the external drive] I have noticed that under the driver properties (and similarly in the registry) the two drives are configured differently (e.g. in driver details property capabilities for the WD the value is set to 0000006, CM_DEVCAP_REMOVABLE & EJECTSUPPORTED - whereas the seagate shows 0000080 & CM_DEVCAP_SURPRISEREMOVALOK). Any easy way to configure things? I tried physically swapping the sata connections on the mainboard without success So far I have found that a solution to my problem might be to perform some reg changes: How do I remove the option to eject SATA drives from the Windows 7 tray icon?

    Read the article

  • Hide/Replace Nginx Location Header?

    - by Steven Ou
    I am trying to pass a PCI compliance test, and I'm getting a single "high risk vulnerability". The problem is described as: Information on the machine which a web server is located is sometimes included in the header of a web page. Under certain circumstances that information may include local information from behind a firewall or proxy server such as the local IP address. It looks like Nginx is responding with: Service: https Received: HTTP/1.1 302 Found Cache-Control: no-cache Content-Type: text/html; charset=utf-8 Location: http://ip-10-194-73-254/ Server: nginx/1.0.4 + Phusion Passenger 3.0.7 (mod_rails/mod_rack) Status: 302 X-Powered-By: Phusion Passenger (mod_rails/mod_rack) 3.0.7 X-Runtime: 0 Content-Length: 90 Connection: Close <html><body>You are being <a href="http://ip-10-194-73-254/">redirect ed</a>.</body></html> I'm no expert, so please correct me if I'm wrong: but from what I gathered, I think the problem is that the Location header is returning http://ip-10-194-73-254/, which is a private address, when it should be returning our domain name (which is ravn.com). So, I'm guessing I need to either hide or replace the Location header somehow? I'm a programmer and not a server admin so I have no idea what to do... Any help would be greatly appreciated! Also, might I add that we're running more than 1 server, so the configuration would need to be transferable to any server with any private address.

    Read the article

  • Windows based development environment: HyperV, VMWare, or VirtualBox on development machine?

    - by bleepzter
    I am a software engineer with a little bit of an informal "support" functionality... I am trying to figure out what is the best possible approach to employing virtualization technologies into our development process. Since the code we develop is server-centric, testing it often requires a VM with specific software requirements. I used to use VM Ware player (free version) to run my VM's until both of my laptops started exhibiting issues with corrupted windows 7 services and dying hard drives. All leads pointed to VMWare, which by the way seems to be a solid product if you pay for the Workstation edition ($300). On a side note, I have always been a fan of the Windows Server product line. I think it makes for one of the best development environments out there - it is highly scalable, highly reliable, and very efficient. So to be fair I replaced the drives of the laptops and installed Windows Server 2008R2, VS2010 Ultimate SP1, SQL Server 2008R2, TFS Server 2010 and all other tools and API's needed do do my work properly. So now I am stuck with a bunch of VMWare VMs. I don't want to repeat of what happened before, and I certainly don't want to bog down my machine with an inefficient hypervisor or services that are not needed. Futhermore the VMDK hard-disk format used by VMWare is not compatible with the VHD format of Hyper V. It is my understanding that converting from one format to the other can only happen by Microsoft System Center Virtual Machine which I have downloaded from MSDN and ready to install. I guess the question at this point is: Does SCVM run as another service in Windows? Is it a memory hog? What is a better virtualization technology - Hyper-V or Virtual Box in terms of efficiency ease of use and most importantly - memory footprint? (Keep in mind the development environment already has a ton of services running such as TFS Server, SQL Server, IIS, etc...) How would you advise to proceed at this point so that the VMs are still used in the test process? Thanks Martin

    Read the article

  • Apache https is slsow

    - by raucous12
    Hey, I've set apache up to use SSL with a self signed certificate. With http (KeepAlive off), I can get over 5000 requests per second. However, with https, I can only get 13 requests per second. I know there is supposed to be a bit of an overhead, but this seems abnormal. Can anyone suggest how I might go about debugging this. Here is the ab log for https: Server Software: Apache/2.2.3 Server Hostname: 127.0.0.1 Server Port: 443 SSL/TLS Protocol: TLSv1/SSLv3,DHE-RSA-AES256-SHA,4096,256 Document Path: /hello.html Document Length: 29 bytes Concurrency Level: 5 Time taken for tests: 30.49425 seconds Complete requests: 411 Failed requests: 0 Write errors: 0 Total transferred: 119601 bytes HTML transferred: 11919 bytes Requests per second: 13.68 [#/sec] (mean) Time per request: 365.565 [ms] (mean) Time per request: 73.113 [ms] (mean, across all concurrent requests) Transfer rate: 3.86 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 190 347 74.3 333 716 Processing: 0 14 24.0 1 166 Waiting: 0 11 21.6 0 165 Total: 191 361 80.8 345 716 Percentage of the requests served within a certain time (ms) 50% 345 66% 377 75% 408 80% 421 90% 468 95% 521 98% 578 99% 596 100% 716 (longest request)

    Read the article

  • Booting an Asus EeePC from a LiveCD USB stick

    - by Bryan
    I have two identical Asus EeePC netbooks that are both installed with Ubuntu. One of them was sitting on the closet shelf and the battery went completely dead. When I charged the battery and tried to boot the it, I got the "No init found" error. In trying to follow the suggested way to fix it posted here, I used the Startup Disk Creator on my Ubuntu 11.10 desktop machine to create a USB stick with a bootable Ubuntu 11.10 live CD on it (the netbook doesn't have a CD drive). I plugged the USB stick into the netbook with the init issues, went into the BIOS and selected the USB stick as the 1st choice to boot from, and did a hard restart. It then just stuck at the flashing underscore. Not knowing why it wasn't working, I tried booting my working netbook from the USB stick. When I got into the BIOS on the working netbook, I noticed the description in the boot order section for the USB device was different. On the non-working netbook, the description was SWISSBIT (the name of the USB stick) but on the working netbook it was just "Rem. Drive". I also noticed on the working netbook there was an additional option under the bootable order section that allowed me to choose which hard drive to boot from. This section showed two hard drives, one of them being my USB stick. So, rather than changing the device boot order, I selected the USB stick as the hard drive to boot from first and it worked like a champ - I was able to boot into the LiveCD on the USB stick. Seems to me the working netbook is seeing the LiveCD USB stick as a hard drive, where-as the non-working netbook is seeing it as a plain ol' USB stick. The BIOS is the exact same version on both netbooks... any idea why it works on one and not on the other?

    Read the article

  • Batch Script to Trim lines in text to first 30 or 50 characters only

    - by SuperUserMan
    I am now new to scripts but i find it really difficult understanding "for" command (especially with that tokens and delimiters etc) . Saying so, i think that for command can be used to do what i am doing. If its not and there is an easier way, ignore my ignorance :( Say i have multiple lines in a text file abc.txt with each line starting and ending with " (quotes) E.g. a file of 3 lines "hey what is going on @mike220. I am working on your car. Its engine is in very bad condition" "Because if you knew, you'd get shredded and do it with certainty" "@honey220 Do you know someone who has busted their ass on a diet only for results to come to a screeching halt after a few weeks" How can i trim each line, within the quotes, to a Fixed length say 30 or 50 or 100 characters (including spaces) I want to enter the number of character in batch and it can trim accordingly and produce a file def.txt with trimmed lines within quotes. Say i enter 50, results of above example should be "hey what is going on @mike220. I am working on you" "Because if you knew, you'd get shredded and do it" "@honey220 Do you know someone who has busted their" Thanks P.S. if you use For command, kindly please explain the command. EDIT: Though the answer provided worked, there is an issue with non english text. I am getting garbled text in Output file for non english text in input file . Any help @barlop here is the nonenglish text ( 1 line) "???? ?? ???? ?? ???? ???? ??? ?????? ???"

    Read the article

  • Where did my backup files go? Can they be recovered?

    - by Ken
    I just purchased a Western Digital Essential SE 1TB external hard drive from Best Buy at their recommendation. I then exchanged it for a Toshiba Canvio (I think that was the name). I have a Toshiba Qosmio X505-Q898. The Canvio locked up my computer and rewrote some kind of OS file, and erased all the restore points as well as the system image backup (according to Best Buy) just by plugging it in for the first time. Never even got to the install part or anything -- plugged it in and fried my computer. They spent about an hour and a half on my computer and got it back to a somewhat working condition and gave me access to my files. So now they say I have to back it up using my recovery disk and rewriting my OS. Enter the Essential. Brought it home last night, plugged it in and installed everything. Works perfect, no problems. Backed up everything on it. I unplugged and plugged it twice to make sure that everything was on it. Essential told me it had both the HDD and SSD backed up. So I reinstalled my OS. Plugged the Essential in and everything loads right up. Went to retrieve my files and the Western Digital has nothing on it. It shows all my music, pics, ETC. as still being on my computer and needing to be backed up, but since there are no files on my computer now. Where is this information coming from and where did my files go? It's about 810GB worth of files I've amassed over several years. Is there any way to recover data from this? I plan to contact Western Digital and Best Buy, just thought I would check here too. Any advice will be appreciated as a lot of these files are invaluable to me.

    Read the article

  • Time Machine is getting stuck at "Preparing to Back Up" and my Trash isn't emptying

    - by zarose
    I have encountered two separate problems, but I am putting them in the same question in case they are related. First, my Trash would not empty. It seems to be getting stuck on certain files, because I will reset my Macbook and some of the files will be deleted, and then if I remove a file or two at random, more can be deleted. Some of these files had strange characters in their names. I tried changing the names to single characters, but this did not help. Next, I attempted to backup my Macbook using Time Machine. I plugged in the HDD I've been using for this, but every time I try to start the backup, Time Machine gets stuck at "Preparing to Back Up". I definitely need to know how to fix the Time Machine problem, but I am curious how to solve the trash problem as well, and whether or not these problems are related. EDIT: Console.app logged the following this morning before I left on a trip. I did not bring the HDD with me. 6/5/12 7:41:28.312 AM com.apple.backupd: Starting standard backup 6/5/12 7:41:46.877 AM com.apple.backupd: Error -35 while resolving alias to backup target 6/5/12 7:41:58.368 AM com.apple.backupd: Backup failed with error: 19 6/5/12 7:59:08.999 AM com.apple.backupd: Starting standard backup 6/5/12 7:59:10.187 AM com.apple.backupd: Backing up to: /Volumes/Seagate 3TB Mac/Backups.backupdb 6/5/12 7:59:13.308 AM com.apple.backupd: Event store UUIDs don't match for volume: Macintosh HD 6/5/12 7:59:13.331 AM com.apple.backupd: Event store UUIDs don't match for volume: Blank 6/5/12 7:59:13.683 AM com.apple.backupd: Deep event scan at path:/ reason:must scan subdirs|new event db| 6/5/12 8:23:31.807 AM com.apple.backupd: Backup canceled. 6/5/12 8:23:33.373 AM com.apple.backupd: Stopping backup to allow backup destination disk to be unmounted or ejected. 6/5/12 9:51:21.572 PM com.apple.backupd: Starting standard backup 6/5/12 9:51:22.515 PM com.apple.backupd: Error -35 while resolving alias to backup target 6/5/12 9:51:32.741 PM com.apple.backupd: Backup failed with error: 19

    Read the article

  • Linux: CIFS/Samba mount hangs for several minutes

    - by Pistos
    I have a small local network which has a Gentoo box and a Windows box. I mount a share originating on the Windows box onto the Gentoo box with a command like: mount -t cifs -o username=WindowsUsername,password=thepassword,uid=pistos //192.168.0.103/Users /mnt/windowsbox Most of the time, everything Just Works, and I can read and write without problems. However, every few weeks or so, the connection or the mount point seems to go dead or hang, such that any process that tries to access the mount point gets stuck in D state (disk, or I/O wait). These processes become impervious to TERM and KILL signals. Disconnecting and reconnecting the Windows box from the network does not help. The frozen state lasts for 5+ minutes. It's really frustrating and gets in the way of normal work, because it freezes Save As dialogues, ls commands, etc. If I issue a umount on the mount point, it either hangs also, or reports that the mount point is in use. Eventually, the dead state resolves itself, and the mount point gets unmounted, or it becomes possible to umount with no delay. My guess is that this happens when the connection/mount has gone idle, or when the Windows machine has been idle. I am not really sure. Why is this happening, and what can I do to prevent it? Or how can I successfully kill these D-state processes at will? Possibly related: CIFS mounts hang on read

    Read the article

  • How can I add a second hard drive to a previously configured UEFI/ACHI Windows 8 machine?

    - by pflyer
    Recently purchased a new Windows 8 PC. It came with one hard drive. I want to a second hard drive to it. This second hard drive is my data hard drive from my previous computer. However, I have run into issues when the system accesses it. The drive is found in the BIOS. But is not seen by Explorer or Disk Management. I have added the drive to the next available SATA slot: SATA 2. The machine is a UEFI/ACHI based machine. In my reading I have found people documenting the following: 1) adding multiple partitioned hard drives (like mine is) to UEFI based machines is not possible 2) I have seen it suggested that you can only add blank hard drives to UEFI based machines. However, in doing so, I did not have success. I tried to add it as a hard drive with unallocated space and then as a hard drive with a single simple partition. Both attempts failed. My ultimate question: What is the proper procedure for adding a second hard drive to a UEFI/ACHI machine? I do not want to reinstall the OS and start from scratch as I have seen suggested elsewhere. There has to be a way to accomplish this without all that hassle. Thanks in advance for your help.

    Read the article

< Previous Page | 638 639 640 641 642 643 644 645 646 647 648 649  | Next Page >