Search Results

Search found 22668 results on 907 pages for 'command prompt'.

Page 643/907 | < Previous Page | 639 640 641 642 643 644 645 646 647 648 649 650  | Next Page >

• NFS of NAS server blocks in cluster environment

  - by Zardoz

  In our department we have an Iomega NAS (px4-300d) connected to a Supermicro cluster with 5 nodes (12 cores per node). Each node mounts a share on that NAS by using NFS. Unfortunately after some time (several minutes) of permanent read/write operations (from all nodes) the NAS starts to block and a bit later freezes completely. We tried several options of the mount command, but nothing helped (async, intr, wsize, rsize). The NAS itself doesn't allow many options (better to say none). Do you have any recommendation how to integrate a NAS using NFS in a cluster environment?

  Read the article

• Laptop battery charging capacity reduced to 52%

  - by omjaijagdish

  I have been using Ubuntu 11.04 on DELL Inspiron 14R (N5010) laptop for last three months. Before I switch to ubuntu my laptop battery used to give 2.5 hrs to 3 hrs back-up. But since I have been using ubuntu, it has been reduced to 1hr to 1.5 hrs at max. I tried following commands: $ cat /proc/acpi/battery/BAT0/state which gave result as present: yes capacity state: ok charging state: charged present rate: 1 mA remaining capacity: 4400 mAh present voltage: 12407 mV then I tried $ acpi -b the result was.. Battery 0: Unknown, 100% when I gave command as $ upower -i /org/freedesktop/UPower/devices/battery_BAT0 the result was.. native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0 model: DELL W7H3N08 serial: 7114 power supply: yes updated: Sat Nov 24 11:25:34 2012 (21 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: fully-charged energy: 48.4748 Wh energy-empty: 0 Wh energy-full: 48.4748 Wh energy-full-design: 48.9595 Wh energy-rate: 0.011017 W voltage: 12.408 V percentage: 100% **capacity: 52.9253%** technology: lithium-ion Someone please let me know, what is going wrong with my laptop? How can I get charging with full capacity?

  Read the article

• how to setup a ssh acount with no terminal but port forwarding?

  - by admalledd

  I am trying to set up a new user account I can give to friends so they can SSH into my forward computer, and only allow forwarding of certain ports. I do not want my friends to have a shell, or be able to change what ports to where they are allowed to forward. example session: joe(friend) connects using PuTTY (that I have pre-set, he isn't good with computers) to example.com(my Internet facing computer) forwarding ports 8080,1990,25565 to him(with what ever end ports he wants, preferably they stay the same numbers) example ssh command to do similar (but he can still change the ports on my computer!) ssh -N [email protected] -p443 -L8080:192.168.1.2:8080 -L1990:127.0.0.1:1990 -L25565:127.0.0.1:25565 then, same story with other friend smith(same ports, same user even) except he is using linux, so cant use putty. is it possible to also leave default SSH functinality for all other users but this one? I found this when I was searching google, but alas, I did not quite understand what was being suggested, and I don't think they covered restricting port forwarding

  Read the article

• Trying to unpack 2.5GB .tar.gz file on Linux but getting "An error occurred while trying to open the archive"

  - by TMM

  Hi, Is there a limit on Linux for the file size of a .tar.gz (or its contents). I am currently creating a .tar.gz (both through the UI/"Compress As" and also through the command line) file for 2 files (6GB and 2GB), and even though it is created successfully, when I try to unpack it using Ark it throws the error "An error occurred while trying to open the archive". I have seen some places that it might be better to archive the file into several smaller .tar.gz files, but I was wondering exactly how to do this (and subsequently unpack the files). Also, is it totally impossible to use the 1 .tar.gz file approach as this would be much simpler. Thanks in advance, Tim

  Read the article

• File/folder Write/Delete wise, is my server secure?

  - by acidzombie24

  I wanted to know if someone got access to my server by using a nonroot account, how much damage can he do? After i su someuser I used this command to find all files and folders that are writeable. find / -writable >> list.txt Here is the result. Its most /dev/something and /proc/something and these /var/lock /var/run/mysqld/mysqld.sock /var/tmp /var/lib/php5 Is my system secure? /var/tmp makes sense but i am unsure why this user has write access to those folders. Should i change them? stat /var/lib/php5 gives me 1733 which is odd. Why write access? why no read? is this some kind of weird use of a temp file?

  Read the article

• Windows Software to Save Arbitrary Application State

  - by ashes999

  VM software does a great job of saving state when you "turn it off," allowing instant and immediate return to that previous state. Is there some application for Windows that allows me to do the same thing, for any arbitrary software? It would allow me to save/restore state, possibly via a shell command or button that it appends to every window. Edit: For clarity, there are two types of apps: those that save their own states, and those that save others' states. Those that save their own state are like Chrome, which on load, reloads the windows you had open last time. That's not what I'm asking about; I'm asking for an app that can save the state of other apps, kind of like VM software does; but for any app. (A trivial test would be load notepad++, type a bunch of stuff, and save-state; on reset-state, you should be able to multi-level undo a lot of what you wrote, as if you never shut down the application.)

  Read the article

• rsync windows to linux permission denied

  - by user64908

  Using Command rsync -avzP --delete --omit-dir-times ../../ [email protected]:/var/www/mysite/ I'm getting rsync: mkstemp "/var/www/mysite/.." failed: Permission denied (13) If ext is in the www-data group should I still set all the files to be owned by user www-data? I am trying to publish the files with rsync and then set the permissions using sudo chown -R www-data doc sudo chgrp -R www-data doc but I can't even rsync because of the permission denied. The SSH works fine, the rsync too except when it tries to write over or update some of the files in /var/www Client * Windows 7 * Cygwin 1.7.16 (GNU bash, version 4.1.10(4)-release (i686-pc-cygwin)) * rsync version 3.0.9 protocol version 30 Server * Ubuntu 12.04 * Apache2 * Root Accounts [ubuntu,ext] * Groups [www-data] * sudo vigr has www-data:x:33:ubuntu,ext I have already configure this http://stackoverflow.com/questions/2124169/cwrsync-ignores-nontsec-on-windows-7 This article has also managed to confuse me http://unix.stackexchange.com/questions/41687/how-should-i-rsync-files-in-var-www-if-i-want-them-to-be-owned-by-www-data What is the right procedure?

  Read the article

• Windows 7 installer doesn't recognize NTFS partition.

  - by ifesdjeen

  Hi, I'm trying to install windows 7 on my Macbook. I've created NTFS partition, but when i'm starting up Windows 7 installation, it says that i can't install windows on this partition, since drive already contains maximum amount of partitions with this filesystem type. I haven't heard of any limits on filesystems, but still i can't even format this drive from Win7 installer. I've found access to command line from win7 installation CD, but i can't find fdisk there to format. Do you have any idea on about how to deal with it?

  Read the article

• How do you synchronise huge sparse files (VM disk images) between machines?

  - by chrisdew

  Is there a command, such as rsync, which can synchronise huge, sparse, files from one linux server to another? It is very important that the destination file remains sparse. It may be longer (but not bigger) than the drive which contains it. Only changed blocks should be sent across the wire. I have tried rsync, but got no joy. groups.google.com/group/mailing.unix.rsync/browse_thread/thread/94f39271980513d3 If I write a programme to do this, am I just reinventing the wheel? http://www.finalcog.com/synchronise-block-devices Thanks, Chris.

  Read the article

• free -m output, should I be concerend about this servers low memory?

  - by Michael

  This is the output of free -m on a production database (MySQL with machine. 83MB looks pretty bad, but I assume the buffer/cache will be used instead of Swap? [admin@db1 www]$ free -m total used free shared buffers cached Mem: 16053 15970 83 0 122 5343 -/+ buffers/cache: 10504 5549 Swap: 2047 0 2047 top ouptut sorted by memory: top - 10:51:35 up 140 days, 7:58, 1 user, load average: 2.01, 1.47, 1.23 Tasks: 129 total, 1 running, 128 sleeping, 0 stopped, 0 zombie Cpu(s): 6.5%us, 1.2%sy, 0.0%ni, 60.2%id, 31.5%wa, 0.2%hi, 0.5%si, 0.0%st Mem: 16439060k total, 16353940k used, 85120k free, 122056k buffers Swap: 2096472k total, 104k used, 2096368k free, 5461160k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 20757 mysql 15 0 10.2g 9.7g 5440 S 29.0 61.6 28588:24 mysqld 16610 root 15 0 184m 18m 4340 S 0.0 0.1 0:32.89 sysshepd 9394 root 15 0 154m 8336 4244 S 0.0 0.1 0:12.20 snmpd 17481 ntp 15 0 23416 5044 3916 S 0.0 0.0 0:02.32 ntpd 2000 root 5 -10 12652 4464 3184 S 0.0 0.0 0:00.00 iscsid 8768 root 15 0 90164 3376 2644 S 0.0 0.0 0:00.01 sshd

  Read the article

• How do I mount a sparse disk image permanently?

  - by Mike

  On Mac OS X 10.6.7, when I mount a sparse disk image (either by double-clicking it or using hdid from the command line), the image: Appears on my desktop Needs to be re-mounted every time I log in I'd like to set up the equivalent of an /etc/fstab which will mount the image when the system boots, and make it permanent - so I don't have to worry if my symbolic links will resolve or not. Is this more trouble than it's worth on a Mac? I noticed that there is no /etc/fstab, and /etc/fstab.hd contains a dire warning: IGNORE THIS FILE. This file does nothing, contains no useful data, and might go away in future releases. Do not depend on this file or its contents. I tried sudo hdid -notremovable <image>, which seemed like half of what I wanted (according to man hdid), but it failed with an error: hdid: attach failed - no mountable file systems.

  Read the article

• Exchange Activesync policy - can I make it not required for a user?

  - by TheCleaner

  Exchange 2010 sp2. I have a "C" level exec that wants to get his email on his android tablet. Easy enough. However, he doesn't want any Activesync policy applied to his device for remote wipe, etc. not even the default policy, and doesn't want to use OWA. I thought I knew Exchange pretty well, but can't find a Powershell command or anything that will allow a device to connect without enforcing at least some kind of policy. Is he out of luck using Activesync? I can set him up with POP3/IMAP, but would rather not.

  Read the article

• Trying to wrap my head around class structure for domain-specific language

  - by svaha

  My work is mostly in embedded systems programming in C, and the proper class structure to pull this off eludes me. Currently we communicate via C# and Visual Basic with a large collection of servos, pumps, and sensors via a USB-to-CAN hid device. Right now, it is quite cumbersome to communicate with the devices. To read the firmware version of controller number 1 you would use: SendCan(Controller,1,ReadFirmwareVersion) or SendCan(8,1,71) This sends three bytes on the CAN bus: (8,1,71) Connected to controllers are various sensors. SendCan(Controller,1,PassThroughCommand,O2Sensor,2,ReadO2) would tell Controller number 1 to pass a command to O2 Sensor number 2 to read O2 by sending the bytes 8,1,200,16,2,0 I would like to develop a domain-specific language for this setup. Instead of commands issued like they are currently, commands would be written like this: Controller1.SendCommand.O2Sensor2.ReadO2 to send the bytes 8,1,200,16,0 What's the best way to do this? Some machines have 20 O2 Sensors, others have 5 controllers, so the numbers and types of controllers and sensors, pumps, etc. aren't static.

  Read the article

• Having internet on a VirtualBox

  - by S4M

  I am running a linux laptop and I set up a VirtualBox under windows XP. My only problem is the VirtualBox doesn't seem to be connected to internet - When I do the connection diagnosis it tells me there is no connection. I am using an NAT adapter, and I bind the port 80 from my computer to the port 80 of the VirtualBox, and same for the ports 8080, but still no result. I would be grateful is someone could help me to sort this out. EDIT: thinking of it, what is making the problem hard - and painful - is the absence of error message. If I try to use a given adapter to share my computer's connection with the VirtualBox, and it doesn't work, I have no way to know why. So, it would be really helpful if someone could share a way to access this king of information (is there a log file somewhere or a way to run VirtualBox from command line in a verbose mode?).

  Read the article

• backing up ntfs disk using rsync on ubuntu

  - by user70366

  For a long time I was using windows. I have a separate drive I use to keep copies of my media files, photos etc. on, which I periodically backup to an external drive. In Windows I used SyncToy to do this. After my Windows stopped booting, I decided to switch to Linux (Ubuntu 10.10). That seems to be going fine, but now I want to backup my drive to the external drive like before. Mostly the two drives will be already the same with maybe about 10GB of extra files added. So I try to use rsync to synchronise the two drives like this: rsync --dry-run -rvlt --modify-window=1 /media/Antonio1TB/Backup /media/FREECOM\ HDD/Backup The problem is the dry run indicates that every file on the drive will be copied. Not just the files I have recently added. What is the correct command to synch two NTFS drives under Ubuntu so that files that already exist don't get copied again? Thanks.

  Read the article

• Deploying InfoPath forms &ndash; idiosyncrasies

  - by PointsToShare

  Well, I have written a sophisticated PowerShell script to expedite the deployment of InfoPath forms - .XSN file.  Along the way by way of trial and error (mostly error and error), I discovered a few little things. Here they are. •    Regardless of how the install command is run – PowerShell or the GUI in Central Admin – SharePoint enwraps the XSN inside a solution – WSP, then installs and deploys the solution. •    The solution is named by concatenating “form-“ with the first 16 characters (or less if the file name is shorter than 16) of the file name and the required WSP at the end. So if the form name was MyInfopathForm.xsn the solution name will be form-MyInfopathForm.wsp, but for WithdrawalOfRequestsForRefund.xsn it will be named form-WithdrawalOfRequ.wsp •    It only gets worse! Had there already been a solution file with the same name, Microsoft appends a three digit number to the name, like MyInfopathForm-123.wsp. Remember a digit is a finger, I suspect a middle finger, so when you deploy the same form – many versions of it, or as it was in my case – testing a script time and again, you’ll end up with many such digit (middle finger) appended solutions, all un-deployed except the last one. This is not a bug. It’s a feature!   Well, there are ways around it. When by hand, remove the solution from the solution store before deploying the form again. In the script I do the same thing. And finally - an important caveat; Make sure that all your form names are unique in the first 16 characters. If you also have a form with the name forWithdrawalOfRequestForRelief.xsn, you’re in trouble! That’s all folks!

  Read the article

• can not access dlink 604 set up interface

  - by user36089

  Hello everyone I used dlink-di604 enthernet board as router to share web access. My ISP provides the service base on Ethernet rathern than base on Ethernet pppoe mode. It is manually setup ipv4, subnet mask , DNS, Gateway etc Log in using web user name&password. I use http://192.168.0.2 try to access dlink di604 setup inferface, but failed I call command ipconfig /all Dos shell displayed: Ethernet adapter Local Connection: Physical Address: 00-3c-56-79-19-49 IPv4 address:10.7.8.225 subnet mask: 255.255.255.0 default gate way: 10.7.8.1 DNS servers 10.10.10.10 What is the correct way to access dlink 604 setup interface and set to share web access? Welcome any comment Thanks interdev

  Read the article

• phpmyadmin error #2002 cannot connect to mysql server

  - by Joe

  so i am getting this error when trying to connect to my mysql server. i have reinstalled MYSQL and php several times and tried a slew of command line work from info around the web.mysql is running and i know that my mysql.sock exists and is located in ~/private/tmp/ and also in ~/tmp/. i also have plenty of hard drive space. i have installed and setup phpmyadmin correctly only adding a password to 'Password for config auth'. AND i have connected to the server via Sequel Pro. so my question is what the heck is going on that i can't connect to the server via phpmyadmin? any guesses? also i'm on a 64-bit intel mac running snow leopard

  Read the article

• Will the Driver Support for Intel HD Graphics be Improved in 12.10?

  - by Hiranya

  I recently installed Ubuntu 12.04 on a HP Pavilion dv4 laptop. This is a core i7 machine with Intel HD graphics and also a separate nVidia VGA card. I had a lot of issues getting Ubuntu 12.04 working on this system. First there were issues booting up the live CD for installation. I worked around that by using the 'nomodeset' option. Then I continued to have similar issues after installation has completed. So I had to permanently add the nomodeset option to my GRUB boot configuration. At the moment I have a working installation but there are many issues: Ubuntu GUI is a bit flaky at times. The mouse pointer goes on and off when hovering over certain icons. Certain things doesn't get rendered properly on the screen. I can't access any of the tty consoles. Hitting Ctrl+Alt+F[1-6] gives me a blank screen. And once that happens I can't even come back to the UI by hitting Ctrl+Alt+F7. I've realized that tty consoles are actually working. I just can't see the text. If I enter a command like 'sudo reboot' into the empty screen the machine reboots. Can't get external displays (monitors, projectors etc) working. But I think this is probably because the VGA out is wired to the nVidia card which is not being used by Linux. colord program crashes every now and then triggering a popup message. So my main question is, will the support for Intel HD graphics be improved in the next release? Or will I have to keep using the nomodeset option in the new release too? Also I appreciate if anybody can shed some light on any of the issues listed above. Thanks in advance.

  Read the article

• Trouble with apache starting on boot with ssl api key

  - by molleman

  Im Running on Centos, the trouble is when i restart my server i need to start my apache and varnish service I use this to start both of them service httpd restart && service varnish restart But i would likw both of them to start when i reboot the server I read i could use this chkconfig httpd on But this is only for apache could i do this chkconfig varnish on Finally when i do y usual start of httpd , i am asked for my api key for SSL , am i able to incorporate this into resarting both varnish and httpd on start up. Or am i doomed to run this command everytime i resart

  Read the article

• Linux - why am i allowed to remove root file?

  - by 0xDEAD BEEF

  Situation as follows: i do su to root, then i create admin file with cat adminfile then i exit from root issuing exit command i can see following adminfile options -rw-r--r-- 1 root root 10 2010-06-16 16:25 adminfile however, after executing rm adminfile it really gets removed -rw-r--r-- 1 root root 10 2010-06-16 16:25 adminfile reinis@reinis-desktop:~/Test/script$ rm adminfile rm: remove write-protected regular file `adminfile'? tada.. file is gone! As i see it - others have only read permision for that file so they shouldnot be able to remove it.. :/

  Read the article

• What do you do to balance the upper or lower case style to name file or folder between work and life? [on hold]

  - by sojyq

  I am a programmer from China. And I like to use English words to name my files and folders Whether it is for work or life. For example, suck as Movie, Work, QtProjects, Music and so on.And I keep the habit of initial the first letter for file name or folder name in Windows. But now I work on Ubuntu, and I found that all file name and folder name are lowercase in addition to the default folder such as Music, Movie and so on. And then I realize that in Linux world, most peoloe like to use all lowercase to name their files and folders for two reasons (1. Linux is Case sensitive. 2. It is fast for shell command.). And after work, when I switch from Linux to Windows, I confuse to use all lowercase or the first letter uppercase style to name my files in Windows. I'm caught in a dilemma. I think that all lowercase is more efficiency but the first letter uppercase is more readable. I thought for a long time and want to come up with a good answer to blance the two style name conversion. But I failed. I want to ask you that how you balance the uppercase or lowercase habbit in Windows, Mac, Linux between work and personal life style? Thank you very much! (My current solution is that when I am in Linux, I use all lowercase for files and folders, but when I am in Windows and Mac OS X, I couldn't find a good reason to convince me to use all lowercase ( I think in Windows and Mac OS X, the first letter uppercase style for me is more readable and beautiful).

  Read the article

• How to dump the Subject Alternative Name (SAN) from an SSL certificate file

  - by LonelyPixel

  I know that I can dump the entire information from a PEM certificate file with this command: openssl x509 -in certfile -noout -text And I've already found another direct parameter to show me only the expiry date of a certificate: openssl x509 -in certfile -noout -enddate But is there also a shortcut to get only the alternative names? Like when a certificate can be used for example.com as well as www.example.com. In the full dump, it's here: Certificate: Data: X509v3 extensions: X509v3 Subject Alternative Name: DNS:www.example.com, DNS:example.com I'd just like to save me the hassle to parse this output and get the domain names only. Is that possible? Otherwise, what would be best practices to parse this output? What can be assumed, what may change? Could I use a regexp like X509v3 Subject Alternative Name:\s*DNS:(\S+)(?:, DNS:(\S+))*?

  Read the article

• Cisco NAC: help with enabling FTP or moving update files

  - by kyoung

  Hi, So this is a LINUX question, and a Cisco NAC question. I'm trying to update our server from 4.1 to 4.7, and i need to move some tarball files to the NAC. the NAC Appliance runs some strange stripped down version of Fedora Core 4 copying the upgrade: The instructions say to FTP the file to the NAC appliance, however whenever i use WinSCP with root credentials, i get a notice informing me the connection was actively refused. I can't for the life of me find any .conf files that sound like winners, so I don't know how to change the settings, however the ftp command does seem to work. what exactly should I do here?

  Read the article

• What are the common Linux commands for SAN-related activities? How do I check if a LUN is attached to the computer?

  - by Nishant

  How do I check if a LUN has been presented to my server? What are the Linux commands for that? Do the LUNs show up in a fdisk -l command like a normal /dev/sda gets listed? What are other commands associated with general SAN related checks in Linux? What is WWN and how does that have any relevance? If we have LUNs, what is the use of multipathing? Bit lengthy but I am not able to get a grasp on the topic. Any help would be appreciated.

  Read the article

< Previous Page | 639 640 641 642 643 644 645 646 647 648 649 650  | Next Page >