Search Results

Search found 3184 results on 128 pages for 'beginning'.

Page 65/128 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• Cloud Database Service Latency/Performance

  - by Gcoop

  Hi All, I am running a heavy traffic site and our server is beginning to get to its limits, at the moment the entire LAMP stack is on one box (not ideal). I would like to move the database onto it's own box or onto a cloud service, but from my previous experience moving the database off the same box as the webserver increases the latency of reads quite dramatically slowing down the site. Is using a cloud service for this going to overcome this problem, because as far as I can tell its essentially the same situation (as moving it onto a separate box in my control)? In which case why is there so much popularity around cloud based database services at the moment? Are cloud based database services so quick that the latency of reads is so low that its almost like having it on the same box in the same datacentre?

  Read the article

• How to get the running of time of my program with gettimeofday()

  - by Mechko

  So I get the time at the beginning of the code, run it, and then get the time. struct timeval begin, end; gettimeofday(&begin, NULL); //code to time gettimeofday(&end, NULL); //get the total number of ms that the code took: unsigned int t = end.tv_usec - begin.tv_usec; Now I want to print it out in the form "**code took 0.007 seconds to run" or something similar. So two problems: 1) t seems to contain a value of the order 6000, and I KNOW the code didn't take 6 seconds to run. 2) How can I convert t to a double, given that it's an unsigned int? Or is there an easier way to print the output the way I wanted to?

  Read the article

• How to refresh an activity? Map View refresh fails

  - by poeschlorn

  Hi Guys, after implementing some Android Apps, including several Map activities, I try to refresh the activity when the GPS listener's onLocationChanged() mehtod is called. I have no idea how to tell the map activity to refresh on its own and display the new coords... the coords to store will have to be in global values, so that the location listener will have access to it. In my sample GPS-class (see code below) I just changed the text of a text view....but how to do that in map view? private class MyLocationListener implements LocationListener { @Override public void onLocationChanged(Location loc) { final TextView tv = (TextView) findViewById(R.id.myTextView); if (loc != null) { tv.setText("Location changed : Lat: " + loc.getLatitude() + " Lng: " + loc.getLongitude()); } } I think the solution of this Problem won't be very difficult, but I just need the beginning ;-) This whole app shall work like a really simple navigation system. It would be great if someone could help me a little bit further :) nice greetings, Poeschlorn

  Read the article

• Bind any version of MySql.Data using the app.config

  - by Martin Kirsche

  How do I bind any version or a range of versions of an assembly by using the app.config? I'm currently binding the MySql.Data assembly like this: <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1" applies-to="v2.0.50727"> <qualifyAssembly partialName="MySql.Data" fullName="MySql.Data, Version=6.2.2.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d, processorArchitecture=MSIL"/> </assemblyBinding> </runtime> Any version of MySql.Data other than 6.2.2.0 is not working this way. The versions of this assembly are changing fast so I either want to bind any or all versions beginning with 6.2 to my application without changing the app.config each time.

  Read the article

• How to search SVN repository for a file when I'm not sure where I put it?

  - by Chris Thornton

  Co-worker is sure he checked in a file: foo_oustanding.dpr but isn't sure when/where (we have lots of "tools" and "utility" ancillary branches, lots of project branches, etc.. I need a way to search the entire repository for this file. I could check the whole source tree out to my HD, but that would take several hours. Is there a faster way? I tried the Repo Browser (Tortoise) and it didn't seem to have a search. I also thought about dumping the log, from the beginning of time. But that seemed silly. I have, at my disposal: Tortoise SVN 1.6 Subversion 1.5.6 running on Apache It runs on a Windows 2003 server. Remote Desktop access to the server, with admin rights. Thanks for any ideas.

  Read the article

• For a .Net project, what file extensions should I exclude from source control?

  - by arame3333

  Everytime I start a project I have to think carefully about which files to exclude from source control. Has someone made a list of the criteria so I can look it up from the beginning? I work on my own so I have not got round to it. I appreciate that in the case of a DLL, you would want to include some and exclude others, so it is not just dependent on the file extension. My projects are ASP.Net, although a general discussion of other templates would also be useful.

  Read the article

• QScrollBar Snap to value

  - by j3frea

  Hi all, I'm wanting to implement a scroll bar that snaps to particular values (like windows can snap to the edge of a screen). The idea is that as I drag the scrollbar down it snaps the bar to values as it approaches them. My scenario is displaying 3 chapters of text. I would like to be able to snap to the beginning or end of a chapter. Of course, to go to the start of the first chapter the scrollbar one can just scroll to the top and likewise with the end of the third chapter. So I'd like to draw two lines on the scrollbar to represent the start of the second and third chapters and then have the top and bottom of the scrollbar snap to those lines. So I'm really actually wanting to use this within a QTextBrowser but I can control a QTextBrowser with a "QSnapScrollBar" I just don't really know where to start. Any help would be greatly appreciated.

  Read the article

• WiX: Extracting Binary-string in Custom Action yields string like "???good data"

  - by leiflundgren

  I just found a weird behaviour when attempting to extract a string from the Binary-table in the MSI. I have a file containing "Hello world", the data I get is "???Hello world". (Literary question mark.) Is this as intended? Will it always be exactly 3 characters in the beginning? Regards Leif Sample code: [CustomAction] public static ActionResult CustomAction2(Session session) { View v = session.Database.OpenView("SELECT `Name`,`Data` FROM `Binary`"); v.Execute(); Record r = v.Fetch(); int datalen = r.GetDataSize("Data"); System.IO.Stream strm = r.GetStream("Data"); byte[] rawData = new byte[datalen]; int res = strm.Read(rawData, 0, datalen); strm.Close(); String s = System.Text.Encoding.ASCII.GetString(rawData); // s == "???Hello World" return ActionResult.Success; }

  Read the article

• In Ruby, how can I initialize instance variables in new objects of core classes created from literal

  - by Ollie Saunders

  class Object attr_reader :foo def initialize @foo = 'bar' end end Object.new.foo # => 'bar' ''.foo # => nil //.foo # => nil [].foo # => nil I want them all to return 'bar' Am aware that you can do this already: class Object def foo 'bar' end end But I specifically want to initialize a state variable. Also note that this doesn't work. class String alias_method :old_init, :initialize def initialize(*args) super old_init(*args) end end class Object attr_reader :foo def initialize @foo = 'bar' super end end ''.foo # => nil Nor does this: class String attr_reader :foo def initialize @foo = 'bar' end end ''.instance_variables # => [] I'm beginning to think that this isn't actually possible.

  Read the article

• What is "sentry object" in C++?

  - by Romain Hippeau

  I answered this question, and Potatoswatter answered too as The modern C++ equivalent would be a sentry object: construct it at the beginning of a function, with its constructor implementing call(), and upon return (or abnormal exit), its destructor implements I am not familiar with using sentry objects in C++. I thought they were limited to input and output streams. Could somebody explain to me about C++ sentry objects as well as how to use them as an around interceptor for one or more methods in a class ? i.e. How to do this ? Sentry objects are very similar indeed. On the one hand they require explicit instantiation (and being passed this) but on the other hand you can add to them so that they check not only the invariants of the class but some pre/post conditions for the function at hand.

  Read the article

• Naming convention in Objective C /C , start with "_"?

  - by Tattat

  Something I see ppl define the variable like this: b2World *_world; b2Body *_body; CCSprite *_ball; instead of b2World *world; b2Body *body; CCSprite *ball; I familiar with the second one, but not the first one. So, I checked the Wikipedia about naming convention: Names beginning with double underscore or an underscore and a capital letter are reserved for implementation (compiler, standard library) and should not be used (e.g. __reserved or _Reserved). So, is that any special meaning which is start with "_"? The wiki page.

  Read the article

• understanding silverlight resource file format

  - by Quincy

  I'm trying to understand the format of silverlight resource files. There are 4 bytes of the data comes after PAD. I'd like to know what these values are, and how they are generated. here is the hex dump of a .g.resources file. Here is what I know: there is 0xbeefcace at the beginning, then there is dependancies, then padding. after that is the great unknown (but I really like to know). After 4 null bytes, are the file name and size of the resource. and After that is content of the said file. I'm not that familiar with .Net and silverlight resource management. would someone please tell me what the mystical 4 bytes are, or point me the url to the specification doc or something. Any help would be appreciated!

  Read the article

• Prefered method for looping sound flash as3

  - by Brian Heylin

  Hi there, I'm having some issues with looping a sound in flash AS3, in that when I tell the sound to loop I get a slight delay at the end/beginning of the audio. The audio is clipped correctly and will play without a gap on garage band. I know that there are issues with sound in general in flash, bugs with encodings and the inaccuracies with the SOUND_COMPLETE event (And Adobe should be embarrassed with their handling of these issues) I have tried to use the built in loop argument in the play method on the Sound class and also react on the SOUND_COMPLETE event, but both cause a delay. But has anyone come up with a technique for looping a sound without any noticeable gap?

  Read the article

• Maven "Module" vs "Project" (Eclipse, m2eclipse plugin)

  - by Ricket

  I'm a beginner at Maven and I've played with it from a command line point of view a little, so now I was trying to use it in Eclipse; I installed the m2eclipse plugin to do so. But I'm stumped from the very beginning! Apparently I've missed a bit of terminology somewhere along the line. I can't keep track of all these new Maven terms... What is a Maven Project, and what is a Maven Module? These are my options when creating a new project in the Maven category in Eclipse.

  Read the article

• CAAnimation rotation did not give last stage?

  - by Mikhail Naimy

  hi, i am using following code to rotate the UIView through Swipe gesture .it works fine.but after rotation, it goes to beginning angle or Fromvalue.anyone can help to stop the view in last stage.if i rotate again, it must go from last stage. rotationAnimation = [CABasicAnimation animationWithKeyPath:@"transform.rotation.z"]; rotationAnimation.fromValue = [NSNumber numberWithFloat:0.0 * M_PI]; rotationAnimation.toValue = [NSNumber numberWithFloat:0.5 * M_PI]; //rotationAnimation.toValue = [NSNumber numberWithFloat: 2.5 * 3.15 ]; rotationAnimation.duration = 1.5; //rotationAnimation.cumulative = YES; rotationAnimation.removedOnCompletion = NO; rotationAnimation.repeatCount = 0.0; rotationAnimation.timingFunction = [CAMediaTimingFunction functionWithName:kCAMediaTimingFunctionLinear]; [self.view.layer addAnimation:rotationAnimation forKey:@"rotationAnimate"];

  Read the article

• Vim: Pasting from clipboard and automatically toggling :set paste

  - by Jonatan Littke

  Hey. When I paste things from the clipboard, they're normally (always) multilined, and in those cases (and those cases only), I'd like :set paste to be triggered, since otherwise the tabbing will increase with each line (you've all seen it!). Though the problem with :set paste is that it doesn't behave well with set smartindent, causing the cursor to jump to the beginning of a new line instead of at the correct indent. So I'd like to enable it for this instance only. I'm using Mac, sshing to a Debian machine with vim, and thus pasting in Insert mode using cmd-v. Cheers.

  Read the article

• Apply Alloy UI 1.5 datepicker to multiple instances

  - by MyTitle

  I want to create Alloy UI datapickers on multiple form fields: <div id="date_1_wrapper"> <input type="text" class="datepick" id="date_1" /> </div> <div id="date_2_wrapper"> <input type="text" class="datepick" id="date_2" /> </div> Using JQuery I can do it using following code: $('.datepick').each(function(){ $(this).datepicker(); }); But how to achieve same functionality in Alloy UI? For now I use following code, but this code apply DatePickers by ID, not by CSS class in loop: AUI().use( 'aui-datepicker', function(A) { new A.DatePicker ( { calendar: { dateFormat: '%d/%m/%Y' }, trigger: '#date_1' } ).render('#date_1_wrapper'); new A.DatePicker( { calendar: { dateFormat: '%d/%m/% }, trigger: '#date_2' } ).render('#date_2_wrapper'); } ); I think it this code can be used in beginning, but how to deal with input's and div's ID's? (A.all('.datepcik').each(function() {)

  Read the article

• Determine which process (b)locks a file, programmatically (under Windows >= XP)

  - by fred-hh

  How to programmatically determine from a process P, which other process P' has a lock on a file, that prevents P from recreating that file ? I know there are tools to do that, but how do they achieve that ? (Context: a batch program that runs overnight fails because of a locked file. Running an admin tool the next day may be too late to get useful information. So it would be nice if the batch program itself was able to determine the culprit.) EDIT: Added complexity: the file resides on a DFS and P' might not run on the same machine as P (but maybe does). But a solution that works locally would be a good beginning.

  Read the article

• Relative links in CSS, after moving Wordpress

  - by bozdoz

  I created a blog with Wordpress on a temporary test domain. I put it in the main directory, not a folder. Now I want to move it to the correct website, in a folder. I can update all of the MySQL values for the site URL, and the relative path links work just fine. The problem is that I can't seem to make my CSS path links work. I realize that my problem is that they are relative to the CSS file, in the WordPress theme, and not the page. But how can I fix this? Here is an example: #topNav {background:#3a93c3 url(wp-content/uploads/2011/07/blueNav.jpg) repeat-x;} I have tried adding './', '../', and '../../' to the beginning, but it doesn't work at all. Any suggestions?

  Read the article

• StringConverter with StandardValuesSupported and Autocompletion

  - by Marqus

  I want to develop a StringConverter with standard values, which after attaching it to a PropertyGrid will act like comboBox with autocompletion. The example below will give me a comboBox, but without the autocompletion - user have to expand it and choose manually one of the items. Is there a way to allow user to type the beginning of one of the options, so the combobox will automatically select the matching one? public class ConverterSample : System.ComponentModel.StringConverter { public override bool GetStandardValuesSupported(ITypeDescriptorContext context) { //true means show a combobox return true; } public override bool GetStandardValuesExclusive(ITypeDescriptorContext context) { return false; } public override TypeConverter.StandardValuesCollection GetStandardValues(ITypeDescriptorContext context) { return new StandardValuesCollection(new List<string>(){"Stack", "overflow", "rules"); } List returned by GetStandardValues has to be dynamic, so I can't use any enum there. I took above example from: http://www.codeproject.com/KB/cpp/dropdownproperties.aspx

  Read the article

• serial port close hangs in compact frame work 3.5

  - by ananda

  I have developed the application for windows mobile 5.0 and .net compact framework 2.0 sp2. This application communicates to the hardware device using serial port. This application works fine in windows mobile 5.0 based PDAs. I have handled data received event to get the data from serial port. But when I run my application on windows mobile 6.1 and .net compact framework 3.5, my application hangs on serial port close API call. There are many workarounds mentioned in the .net compact framework blog like (closing the com port on different thread, opening the port in the beginning of the application and close once application exists, polling for data instead of event handling), but nothing is working consistently.

  Read the article

• A realistic and usable (VS2010) MVC2 project template?

  - by pomarc

  Hello. everybody. The default MVC2 web project template which VS2010 creates when you select "ASP.NET MVC2 Web Application" is quite a nice start... but nowhere near a realistic app framework. E.G.: user accounts without such features as password recover easily customizabile (and maybe multilingual) error messages an interface to manage users, such a searcheable user list, user edit and so on which an admin can use and these are just the beginning of the usual, mandatory basic features a web site of any size may use. Searching through the online projects templates doesn't seem to help, ehiter. Are there any project template sites or else that you are aware of, that gives such features? thanks a lot!

  Read the article

• What is a reasonly priced map API solution for a startup?

  - by Kevin

  I've been developing my application with Google Maps and the wonderful rails plugin for it, expecting to find that when I put my app into production that the commercial licensing wouldn't be too expensive. Then I found out it cost $10,000/year, no exceptions so far. http://www.47hats.com/2009/07/google-maps-the-10k-gotcha/ That's not a terrible price to pay for unlimited usage when your site becomes successful, but for those of us trying to build something from the ground up, that's a hefty price to pay. I've looked at Bing and Yahoo but they're very wishy-washy with what ballpark the pricing is. That on top of the fact I have to ditch my nice rails plugin YM4R for Google maps... Is anyone out there using a map API solution that doesn't cost an arm and a leg to get started with in a commercial aspect? I don't mind not using a plugin, I just need something that will work and is cost affordable in the beginning.

  Read the article

• A file was added to git on commit n. How do I add it instead to commit n-m?

  - by carleeto

  I have a branch. Half way through I noticed git was not tracking a file that it should have been and so I added it as part of a commit and continued with my work. Now, I'm doing a git bisect and all commits before the file was added do not build. So I'm thinking, I need to split the commit that added the file into two parts: the file add and the rest of the commit. I then need to re-order the commits so that the file add commit will be at the beginning of my branch. Is this the correct solution or is there a better way of doing it?

  Read the article

• Blogger Template not saving after Facebook like changes

  - by David Shellabarger

  I've add the facebook Like button to http://www.goldfishview.com/ and that works great. Its powered by Blogger. Now I want to move it to the end of my posts instead of a the beginning. I move the facebook iframe and the preview looks great, but once I save the template it reverts back to were it was. I've tried in Chrome and Firefox. In Chrome after I click preview the save template button becomes useless and doesn't do anything when I click on it. In Firefox everything looks like it takes, but on page refresh the iFrame goes back to its original position. Am I crazy?

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >