Search Results

Search found 26335 results on 1054 pages for 'external display'.

Page 65/1054 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

  • Can't Read/Write the Hard disk used in NAS

    - by mgpyone
    I've lately purchased a Synology DS212j and I intended to use my two 3.5" HDs into it. One of them was in used as an external HD. Thus when I install these two unit in NAS, it asked me to formatted in order to used with its format (I think it's ext3?) . I installed the Disks and omit the formatting option. I just got another 3.5" Hard Disk now. I've installed it in the NAS. everything's fine. However, when I take out the (used) HD from the NAS and install back in the standalone casing, I found out that it can't be read from both OSX an Windows 7. I've tried with ext2sd and I only found 2GB portion of the whole 1.5 TB Hard Disk. Here's another reference from EASEUS Partition Master

    Read the article

  • What to do with old laptop screens?

    - by Lord Torgamus
    This question is inspired by another SU question I came across earlier today: What to do with old hard drives? It made me think about two long-dead laptops I have with perfectly good screens still inside. One is a Dell Inspiron 5100 and the other is an Averatec E1200, but responses need not be geared towards those particular models' screens. Rules, based heavily on the original question's: Objectives and suggestions to keep in mind when you post an answer : Should showcase your geekiness, be plain ol' fun, serve a social purpose or benefit the community. Your answer need not be limited to only one screen. For a really good answer, I'll go out and buy additional leftover screens. Your answer need not be limited to one project per screen. If additional accessories need be purchased, make sure they are common. Don't tell me to get a moon rock or something. The projects you suggested should serve a useful purpose; art is nice, but functional art is way better. Thanks in advance, folks. EDIT: Found another related question. Fun projects to do with an old 17" LCD monitor EDIT 2: I, for one, am enjoying the new outpouring of creativity here. Best fifty bucks... I mean, rep points... I ever spent. EDIT 3: That does it. At the end of the week, there was a tie for most votes between the accepted answer and the game platform answer. The game platform answer was cooler, but less reasonable as a project to actually do; in other words, it was more moon rocky. Unfortunately, I think fencepost had the best comment on the topic, which is that displays on their own have no good interface. Thanks for playing, everyone!

    Read the article

  • Why are monitors so poor?

    - by ULTRA_POROV
    72 ppi is nothing. And we have been stuck with this for 20 years. Why do we need to resort to stupid tech like anti-aliasing instead of resolving the core of the issue, more pixels per inch!!! It is really surprising considering all the progress cpu's, video cards, etc. have made.

    Read the article

  • Tool to Set a Hotkey to Adjust Overlay Surface Gamma

    - by Synetech inc.
    I am looking for a (Windows XP) utility (preferably a standalone app) that can let me set a hotkey to adjust the gamma (and hopefully other color settings) of the overlay surface. ATI Tray Tools does not have the ability to bind the overlay color adjustments to the overlay. I’ve asked him about it and he said it was difficult to implement or something (he was kind of vague). The ATI Catalyst drivers do not have a hotkey function for the overlay tab either. Can anyone help?

    Read the article

  • Can't read from the source file or disk

    - by Wanna coffee
    I'm having a two WD external hard disk with capacity of 1 TB. I'm trying to copy SAP file(capacity - 250 GB ) in the extension of .vmdk from one hard disk to another hard disk. But when ever i'm trying to copy, at down to the line it showing me this error message. By default my both hard disk File System value is NFTS, even though it showing me an this error message. Is this problem with OS or Hard disk or Data which i'm taken into the action?? What might be the problem, Please give me your suggestions and recommendation. Awaiting for your reply.

    Read the article

  • What is the downside to Windows XP style DPI scaling in Windows 7

    - by JavaNinja
    I recently just moved to Windows 7 and I noticed that many of my older third-party apps didn't look so good at the high DPI I had set (150dpi versus the typical 96dpi). After searching the web for ways to get my apps to look good again, I stumbled upon the "Windows XP style DPI scaling" option. I enabled it and suddenly the apps looked good again. While I'm happy, I'm also suspicious. What did I lose by enabling this feature? Could someone explain to me the differences in how the screen is rendered with and without this feature, or explain the trade offs of using it?

    Read the article

  • How can I find which drivers are the correct ones for my machine?

    - by tombull89
    I'm currently installing Windows 7 onto a new laptop before imaging it to deploy. I need to install the Wireless and Graphics drivers, but the HP site is offering me both ATI and Intel graphics drivers (at 102MB and 470(!)MB) a pop, as well as Intel, Broadcomm, RealTek and Atheros wireless drivers. Is there a bit of software that will tell me what devices are in the machine so I don't have to go through, trial-and-error and find which is the right driver for the hardware?

    Read the article

  • How to make mounted external drive writable over SFTP

    - by Brandon
    I have a user that I log in with over SFTP to my Ubuntu box. They have permission to write to the home directory of course. The external hard drive gets mounted to /media folder but I can't write to it over SFTP while logged in with that user. How would I set the permissions to allow me to write to the drive?

    Read the article

  • How to set the laptop screen brightness programatically?

    - by zls
    I'm currently migrating to openbox without gnome session. In unity i can use the vendor keys to set the screen brightness, but in openbox I'm on my own. /sys/class/backlight/acpi_video0/brightness works fine, the problem is that I need sudo to set the brightness and that wouldn't work with keyboard mappings. xbacklight -get/set doesn't do or output anything. I don't really want to use xrandr --brightness. Are there any other options or a way to fix the problems with xbacklight or acpi_video0 ?

    Read the article

  • Resize image on ViewSonic CD3200-EU

    - by JohnLBevan
    My ViewSonic CD3200-EU monitor doesn't seem to have an option to scale the image vertically. I've tried all the buttons which look promising and even went as far as browsing the manual (possibly my first time). http://www.viewsoniceurope.com/uk/assets/004/9269.pdf Does anyone know if this can be done? I'm connecting with an android hdmi stick (http://www.amazon.co.uk/gp/product/B008XX29WS/ref=oh_details_o00_s00_i00) so if there's any way to change screensize that way that would also be appreciated. Thanks in advance.

    Read the article

  • How to automount a Truecrypt volume before login in Windows 7?

    - by nonoitall
    I have an external hard drive containing all my documents, and it is encrypted with a password via Truecrypt. I'd like my desktop computer at home to automatically mount the volume prior to my logging in (so that it can be used as my user folder) without asking me for a password. (Yes, the password can be saved in plain text on my desktop's hard drive - that's okay.) For the life of me, I can't figure out a way to do this that actually works though. Tried using the Task Scheduler to schedule a mount when the computer starts up, and it works, but the volume is only accessible by my user account after I log in. (Haven't tried every combination of users/options for the scheduled task, so maybe there's something else there I need to try.) Also tried adding a startup script for my user account that runs on login, which evidently is too late to set up the user's profile folder. Anybody ever successfully achieve this or something like it?

    Read the article

  • Send email from different domains to different external IP's on a single server

    - by user140429
    I have set up a windows 2008 R2 server to route email from Exchange 2010 using SMTP Server in IIS. I have 3 seperate domains and would like to route each one through a different internal and external IP for (IP Reputation etc), at the minute it is only using the primary IP on the server to route email externally. Is this at all possible using SMTP Server in IIS, or is there any other software available to do this?

    Read the article

  • I can't set the resolution to that recommended by my monitor

    - by F4r-20
    Firstly, I have looked here but didn't find what I needed. I have a Dell Optiplex 380 only using the on-board graphics (believe its the Intel G41 Express Chipset) but I can't seem to get the resolution right. The monitor I'm using (HP LE1901w) wants me to use 1440x900 but the only options I get are: 1600 x 1200 1366 x 768 1360 x 768 1280 x 1024 1280 x 960 1152 x 864 1024 x 768 800 x 600 So it will allow me to go higher or lower but not 1440x900. I've tried getting the driver from various different sources (Dell, Intel, Windows 7 Update) but still can't get that option. Does anybody know what else I can try?

    Read the article

  • Monitors go to sleep and come back blue

    - by TahoeWolverine
    Recently, my displays have been turning blue when they wake up from sleep. This has hapeened on my Macbook and on my 2nd monitor on my PC (which I use for VM and remote desktop). It's possible that part of it might be my eyes, but seeing the blue monitor next to my other monitor on my PC has convinced me that something is probably out of place. What might that be?

    Read the article

  • Clone drive in Windows

    - by ERJ
    I have two 2 TB external USB hard drives, call them HD1 and HD2. HD1 is USB 2, HD2 is USB 3. Each drive contains exactly one NTFS partition. I want to clone HD1 to HD2, because it's newer and much, much faster. What's the best way to do this? I don't want to do a copy-and-paste, I want to clone the whole partition. The new drive is actually a few bytes larger, so this should be possible? I don't have a second drive that can hold the image, so it would have to clone directly to the other disk (not to a file). How can I accomplish this on Windows 7? I know about Clonezilla but I would prefer not to have to boot from a CD or anything, as I don't have the capability to do that right now. I want to know if there's a way to do this while running Windows.

    Read the article

  • Best method to auto-adjust on new displays (dsub)

    - by Shiki
    I'm not searching for a software, because they can't do this I guess. Basically on the latest displays (and even on older ones) there is an auto-adjust if you use the DSUB connection. That's OK, but it varies which page I go, where I press it. I'm searching for the best method to calibrate/adjust this.

    Read the article

  • Summing of total with dynamics rows coming external datasource

    - by Gainster
    I am using Excel 2010 and retrieving data from SQL analysis service. When I refresh the data from Excel, the rows all refresh as they are bound to an external datasource. I am adding a separate column with a formula to sum the totals. With an increment or decrement of these rows, the alignment of custom columns goes out. How can I resolve this problem that summing of values become dynamic with adding and removal of rows?

    Read the article

  • What power cord does a WD16001032 hard drive use?

    - by llcf
    I have a Western Digital 160GB My Book USB external hard drive (WD16001032), but I can't find its power cord (or, at least, figure out which one it is in my box of cords). It might be that only one power cord would fit, but I'm a bit cautious since I just tried one of the cords with a router and could smell electronics burning when I used an incorrect one. What voltage/amps are needed for this drive? I can't find specs on Western Digital's site. I'm assuming this is due to it being an older drive.

    Read the article

  • No image from graphics card but image from onboard video

    - by ReAzem
    I have an HD 5970 running on a P8Z68-v LE motherboard and I have no image comming out of the graphic card. When I plug my screen on my motherboard, I see the bios and the OS. When I plug my screen on the graphic card, I don't see anything. I know that the graphic card works because I have tested it on another computer. I know the motherboard works because I tested it with another graphic card and it worked. I know that the graphic card works with the computer because I have another computer with a P8Z68-LE and an HD 5970. I know it is not an OS issue because I should atleast be able to see the bios. I have tried unplugging my HDDs so that the OS dont interfere with anything. Using a 1000W power supply Using another HD5970 on the computer works. So this is a problem with my HD5970, but why is the graphic card working on my other computer?

    Read the article

  • Program for getting the cursor's x,y coordinates?

    - by Click Upvote
    Is there a program which lets you easily get the x,y coordinates for your cursor? Basically, I move my cursor to somewhere on my screen, it shows me the x,y coordinates and has an option to copy them to the clipboard or export them somehow. I can already do this if I take a screenshot and open it in MS Paint, then as I move the mouse cursor over the screenshot it shows the coordinates in the status bar, however I have to manually write them down, hence its not convenient.

    Read the article

  • What is the cause of a vertical white line on an LCD monitor?

    - by Deviruchi D Devourer
    This just happened yesterday when I was browsing the internet. My AOC N941Sw monitor is suddenly showing a thin horizontal white line near the center of the screen. The white line distorts the images. I tried checking the cables for loose connection and dust particles but the white line is still here. There are times the entire image below the horizontal white line flickers and move up and down. When this happens, I just turn off the monitor then the flicker goes away but the white horizontal line is still there. After a few minutes, the same thing happen all over again. Is there a way to fix this?

    Read the article

  • Connecting to a 2.5" laptop drive using USB

    - by user27449
    So I swapped my MBP hard drive with a SSD drive, and I want to connect to my old hard drive. I bought a nextstar 3 external 2.5" drive enclosure that has a USB 2.0 interface. I watched an online video of an older version of the enclosure, and in the video they had a ATA cable to connect to the drive. My enclosure didn't come with anything like that, and there doesn't seem to be a way to connect to my drive (my old drive is a seagate 500gb momentus 7200 RPM). My laptop is about 2 years old now (MBP 17"). The drive doesnt' have pins to connect, it has a wide plug type connector, and a USB connector also (I was able to directly plugin the USB cable to the drive, but didn't connect it to my computer, was just testing thigns out). Is it safe for me to directly connect the cable that came with the enclosure to the drive, and then connect the other end to my computer? Does this single cable provide power and data transfer?

    Read the article

  • Which particular file caused "Delayed write failed" error?

    - by user35020
    I sometimes get this error when resuming from hibernation: Delayed Write Failed: Windows was unable to save all the data for the file G:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. I know this is caused because the hard drive (G:, an external USB drive) was (a) plugged in when I hibernated and wasn't ready at wake-up, or (b) I simply forgot to plug it when resuming from hibernation. My question is: is there any way to see which particular file/folder/etc failed to be written? The hard drive functions correctly before and after, so there seems to be no permanent damage. Is there a detailed log someplace or a utility? I've searched but found nothing. Thanks for any help!

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >