Search Results

Search found 35976 results on 1440 pages for 'js test driver'.

Page 65/1440 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• How do I install the EW-7318Ug wireless drivers?

  - by user69731

  I'm on Ubuntu 12.04 and I need to install & configure Internet connection. I want to use montor mode in Wireshark. After Ubuntu installation my wireless card was recognized but it doesn't connect to the Internet. Internal wireless card works well. What should I do? I'm new to Linux. PC:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr 64:31:50:0f:d4:70 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:45 Base address:0x8000 eth1 Link encap:Ethernet HWaddr e0:2a:82:aa:2d:3e inet addr:192.168.0.101 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::e22a:82ff:feaa:2d3e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:20978 errors:0 dropped:0 overruns:0 frame:364651 TX packets:20949 errors:171 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:19299119 (19.2 MB) TX bytes:3024858 (3.0 MB) Interrupt:19 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4788 errors:0 dropped:0 overruns:0 frame:0 TX packets:4788 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:387017 (387.0 KB) TX bytes:387017 (387.0 KB) wlan1 Link encap:Ethernet HWaddr 00:1f:1f:44:c1:a4 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:10508 errors:0 dropped:0 overruns:0 frame:0 TX packets:6143 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14831319 (14.8 MB) TX bytes:644606 (644.6 KB) PC:~$ iwconfig lo no wireless extensions. wlan1 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:225 Noise level:162 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions.

  Read the article

• Keyboard Mouse Problem

  - by Zachary K

  I just installed Ubuntu on my laptop (Core 2 Duo Sony Vaio) and am having a problem with the external keyboard and mouse. When I first logged in the left mouse button does not work, this can be solved by unplugging the external keyboard/mouse's USB connector and then plugging it back in again. But Then randomly other problems happen. (Shift gets stuck, keys don't work etc) The keyboard and mouse are a generic brand wireless (A4 Tech) that I got for cheap. Both work OK under windows so this is a major pain.

  Read the article

• Physics Loop in a NodeJS/Socket.IO Environment

  - by Thomas Mosey

  I'm developing a 2D HTML5 Canvas Game, and I am trying to think of the most efficient way to implement a Physics Loop on the server-end of things, running NodeJS and Socket.IO. The only method I've thought of is using setTimeout/Interval, is there any better way? Any examples would be appreciated. EDIT: The Game is a top-down Game, like Zelda and older Pokemon Games. Most of the physics done in the loop will be simple intersects.

  Read the article

• Unity and games don't work on new Thinkpad T420

  - by Clay Smalley

  Here's my setup: Lenovo ThinkPad T420, brand new NVIDIA Graphics Card 4GB of Ram 128GB Solid State Drive Intel Core i5 Processor Given these specs, there's no reason games and Unity shouldn't be working. The strange thing is that both do work when I run from a live USB, but not when Ubuntu is installed to the hard drive. Is there something different with the 3D capabilities of running from the computer as opposed to running from the live USB? Edit: Some more information: When I log in for the first time when running from the hard drive, Ubuntu says "It seems that you do not have the hardware required to run Unity. Please choose Ubuntu Classic at the login screen and you will be using the traditional environment."

  Read the article

• How can I get my ATI / AMD drivers to work with any kernel above 3.2.0.x?

  - by TorakTu

  How can I get my ATI / AMD drivers to work with any kernel above 3.2.0.x ? WHAT DID WORK Installed original AMD64 version of Ubuntu 12.04 ISO image. Burned DVD and installed which shown kernel 3.2.0-23 to begin with. Got 5.1 surround sound working. Got ATI ( Now its AMD ) video drivers installed for my Radeon HD R6870 Video card from AMD's website. fglrxinfo came up and reported as normal. THE PROBLEM Kernel 3.2.0.x kept locking up so I tried higher kernel versions. But ATI / AMD Drivers do not install on any kernel Above 3.2.0.x WHAT I HAVE TRIED I have gone over this tutorial many times ( https://help.ubuntu.com/community/BinaryDriverHowto/ATI ) and it doesn't work on ANY kernel except 3.2.0.x. The problems I am having here are that the ATI / AMD drivers working for the 12.04 Precise with kernel 3.2.0-23 and 24, But the computer kept locking up. Although all my games would work, the lock ups were random and were constant. So I looked all over the web for 3 days trying to find an answer and the lock up issue was said to just update the kernel. So I did. Have tried many kernels. All of them .. no lock ups. BUT the Restricted AMD drivers from the AMD website will not install. And none of the OpenSource AMD drivers have EVER installed no matter what Kernel or version I tried. EXAMPLE OUTPUT OF 3D TYPE OF ERRORS Javax.media.opengl.GLException: glXGetConfig failed: error code GLX_NO_EXTENSION at com.sun.opengl.impl.x11.X11GLDrawableFactory.glXGetConfig(X11GLDrawableFactory.java:651) at com.sun.opengl.impl.x11.X11GLDrawableFactory.xvi2GLCapabilities(X11GLDrawableFactory.java:350) at com.sun.opengl.impl.x11.X11GLDrawableFactory.chooseGraphicsConfiguration(X11GLDrawableFactory.java:174) at javax.media.opengl.GLCanvas.chooseGraphicsConfiguration(GLCanvas.java:520) at javax.media.opengl.GLCanvas.<init>(GLCanvas.java:131) at haven.HavenPanel.<init>(HavenPanel.java:68) at haven.HavenPanel.<init>(HavenPanel.java:78) at haven.MainFrame.<init>(MainFrame.java:182) at haven.MainFrame.main2(MainFrame.java:306) at haven.MainFrame.access$100(MainFrame.java:34) at haven.MainFrame$7.run(MainFrame.java:360) at java.lang.Thread.run(Thread.java:722) And of course this is what fglrxinfo shows : X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 139 (ATIFGLEXTENSION) Minor opcode of failed request: 66 () Serial number of failed request: 13 Current serial number in output stream: 13 EDIT : I forgot to mention that I DID look at this post over the last few days and it did not help.

  Read the article

• How to install a Logitech webcam?

  - by Agnese

  I'm having problems with installing a webcam: Archive: /media/LWS_2_0/Setup.exe [/media/LWS_2_0/Setup.exe] End-of-central-directory signature not found. Either this file is not the last disk(s) of this archive. zipinfo: cannot find zipfile directory in one of /media/LWS_2_0/Setup.exe or /media/LWS_2_0/Setup.exe.zip, and cannot find /media/LWS_2_0/Setup.exe.ZIP, period. How do I solve this?

  Read the article

• Problem in calling a method recursively in nodejs mongodb [closed]

  - by Nilesh

  I am trying to create a tree using nodejs and mongodb.Wanted to show a path of a particulr node from the root.So I am finding the destination path and looping back to its parent iteratively until the root.So this is the snippet I am using which results in infinite looping articleProvider.finditsparent(t,function(error,tap){ if(tap[0].parent=='null') { t=(tap[0].parent); console.log(n); } else { n.push(tap[0].parent); console.log(tap[0].parent); t=(tap[0].parent); res.send(n); } }); res.send(n); }); How should I get rid of this problem?Is there any way to call it recursively?

  Read the article

• Dealing with the node callback pyramid

  - by thecoop

  I've just started using node, and one thing I've quickly noticed is how quickly callbacks can build up to a silly level of indentation: doStuff(arg1, arg2, function(err, result) { doMoreStuff(arg3, arg4, function(err, result) { doEvenMoreStuff(arg5, arg6, function(err, result) { omgHowDidIGetHere(); }); }); }); The official style guide says to put each callback in a separate function, but that seems overly restrictive on the use of closures, and making a single object declared in the top level available several layers down, as the object has to be passed through all the intermediate callbacks. Is it ok to use function scope to help here? Put all the callback functions that need access to a global-ish object inside a function that declares that object, so it goes into a closure? function topLevelFunction(globalishObject, callback) { function doMoreStuffImpl(err, result) { doMoreStuff(arg5, arg6, function(err, result) { callback(null, globalishObject); }); } doStuff(arg1, arg2, doMoreStuffImpl); } and so on for several more layers... Or are there frameworks etc to help reduce the levels of indentation without declaring a named function for every single callback? How do you deal with the callback pyramid?

  Read the article

• OOP implementation of BUFFS and Stats. Suggestion

  - by Mattia Manzo Manzati

  I am developing an MMORPG server using NodeJS. I am not sure how to implement Buffs, i mean, equipped objects or used skills have effects on the Player() which has many Stats(), some of them have a max cap... Effects can change the Stat value, increasing or decreasing it by a value, a percentage or completly rewrite the value of the stat. After a while I have decided to create a base class for buffs, which can be hidden (if they are casted from an equipped object) or shown if they came from an ability (Spell). Anyway I need suggestion how to implement it, use an array for all active buffs for a stat and have a function calculate the value of the stat affected by buffs each time I need the value of the stat or...? Other more OOP's ways to do it? I have read this What's a way to implement a flexible buff/debuff system? but this implements only a percentage system, which buffs can only say "+10%, +20%, etc...", but I would love to have an hybrid system, which can have percentage values or static values (like WoW does), and using modifiers it's hard to implement, because modifiers refers to the current value of stat :/ Thanks for suggestions :)

  Read the article

• Cannot view, use, or open CDs or DVDs in Ubuntu 12.04

  - by user67592

  I am fairly new to Ubuntu 12.04 and I have encountered a rather irritating problem. Whenever I insert a CD or DVD (whether it have data, music, movies, or nothing at all), nothing pops up saying "you have inserted a CD", "play with Rhythmbox?" etc. It doesn't show the CD in the launcher/dock or anything of the sort. This is especially peculiar because not only do I have a standard IDE built-in optical drive, but I have an external USB optical drive. Neither work. In addition, whenever I go to "Computer///" and I click (double click, right click, or even left click) on "CD/DVD Drive" nothing happens, when I right click and select "Open" nothing happens either [for either of the two drives (both are listed in Computer///)] And if I insert a blank disk and go to a disk burning program such as Brasero, and try to burn to the drive it detects no CDs or DVDs of any kind. I'm rather stumped and can't seem to find a question similar to this. :( Thanks for all your help in advance!! :) ~Preston Output of sudo lshw *-cdrom description: DVD-RAM writer product: CD/DVDW TS-H652M vendor: TSSTcorp physical id: 0.0.0 bus info: scsi@5:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 0414 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-cdrom description: DVD reader product: DVD Writer 300n vendor: HP physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/cdrom2 logical name: /dev/cdrw2 logical name: /dev/dvd2 logical name: /dev/sr1 version: 1.25 serial: [ capabilities: removable audio cd-r cd-rw dvd configuration: status=nodisc

  Read the article

• Can emsripten compile down to Canvas-based Js instead of WebGL?

  - by Sebastian Scholle

  I understand that emscripten compiles down LLVM to JS and it converts OpenGL Calls to WebGL. Thats a fairly simple translation. Is there a way to tell emscripten to use some other graphics Library ( for example Pixi JS ) for its rendering code translations? Is the compiled JS code easy to update or would it be better to merge in your own Graphics API that handles WebGL/Canvas calls. IE: can we use a C++ Graphics Wrapper Library that when compiles to JS, will simply plug into our own JS Graphics Wrapper Library? Im assuming YES, but has anyone tried this? And if So, what would be your technique, as my C++ skills are basic.

  Read the article

• How to set up a WACOM Cintiq 24 HD in Ubuntu 11.10/12.04?

  - by isphording90

  I'm new to Ubuntu and the Linux world (switched from mac to linux) and i have a problem: I'm studyin industrial-design and a lot of my work depends on my wacom cintiq 24 HD. My problem is that ubuntu doesn't find my cintiq. I googled for wacom drivers and found the linux wacom project. The problem for me is that i hardly understand anything of what i have to do... Is there anyone who can tell me how i can set up my 24HD or is there an easy way for people who are new to linux like me. I really really like linux and want to stay with it but that isn't possible for me without my cintiq. I would be very greatefull for any help!

  Read the article

• Getting the Dell XPS 16 Synaptics touchpad to work after hibernation

  - by Aron Rotteveel

  I am currently experimenting with using Ubuntu as a my main OS instead of Windows 7. So far, pretty much everything is working fine, except for an issue that I am having with my touchpad. I have a Dell XPS 16 (1640) with a Synaptics touchpad. It works out of the box, but it seems that it stops working after returning from hibernation mode. This problem has also been addressed in an earlier bug, but judging from this bugreport, it should be fixed by now. I am running the 2.6.35-23-generic-pae kernel. Any ideas?

  Read the article

• How to Install Linux on my PC

  - by Holic

  Hi i need some help to install the drivers from my pc, on Ubuntu 10.10 i just installed it, and i a newbie on Ubuntu, but i understand a bit of Windows...but i want to try ubuntu and then Maybe change to UBUNTU!!! My hardware: QuadCore Intel Core i7-870, 3266 MHz (24 x 136) Asus P7P55D-E (2 PCI, 3 PCI-E x1, 2 PCI-E x16, 4 DDR3 DIMM, Audio, Gigabit LAN, IEEE-1394) NVIDIA GeForce GTX 480 (1536 MB) nVIDIA HDMI @ nVIDIA GF100 - High Definition Audio Controller VIA VT1828S @ Intel Ibex Peak PCH - High Definition Audio Controller [B-3] DIMM1: G Skill F3-12800CL9-2GBRL 2 GB DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) DIMM3: G Skill F3-12800CL9-2GBRL 2 GB DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) my pc is not connected to the internet with a wire(RJ45) but with a wireless LAn Asus WL-167G-V3(wich i also whant to install if possible) Anything would've help me :) Cheers & Thank you!

  Read the article

• Uninstalling ATI's drivers and installing NVIDIA's?

  - by whydidithavetobreak

  I replaced my card but I'm not sure how to set things up on Ubuntu. When the computer boots, it doesn't start GDM (I think that's what it's called). Instead, it asks me to log in the command line. If I try to do a startx, it tells me there is no AMD device connected or something to that extent. I originally installed the ATI drivers using the GUI. It said that I was using the limited drivers or something to that extent with a popup on the right of one of the taskbars, so I clicked there and updated it. I think it could also be reached by going to system administration restricted drivers or something close to that. I tried installing the nivida drivers by doing a "sudo apt-get install nvidia-glx-185" and then doing "sudo modprobe nvidia" and "sudo nvidia-xconfig" as this guy says but that didn't work. Modprobe couldn't find anything related to Nvidia and nvidia-xconfig wasn't an available command for me. Since I wasn't sure how to remove the ATI drivers I did that without messing with them. Not sure if that was a good idea.

  Read the article

• 11.10 7600gt display error

  - by Justin Ray

  So i used to use Ubuntu back when it was 8 and it never gave me any problems but recently i did a fresh install of 11.10. But now when i install the N-Vidia restricted drivers i cant change my screen resolution from 640x480, the display menu says "can not detect display". There is no way to navigate the screen really because the windows don't work and I'm not very command prompt keen please help i love Ubuntu!

  Read the article

• Gaming with ATI open-source drivers

  - by user7174

  I have recently bought humble bundle 2 ( http://www.humblebundle.com/ ). Is there a way to run Braid using ATI's open-source drivers? The game always crashes. When do get it to start in windowed mode once i go to the first level it will crash. I am using the lastest version of Braid (ST3C ignored) When I use the proprietary drivers Braid works flawlessly and World of Goo performance is increased. However there is terrible screen tearing with the ATI propritary drivers. So my question is: How do I play Braid if I want to use the proprietary drivers?

  Read the article

• Which drivers do I need for Ethernet and CAN bus on Intel Tolapai?

  - by Hanno Fietz

  I've installed 10.04 Server on an embedded machine (NISE 110 by Nexcom) and the builtin Ethernet and CAN-bus controllers don't work out of the box. The controller seems to be an Intel EP80579 chipset for both, according to lspci. I tried Intel's product website, where they seem to have FreeBSD drivers only. There's also drivers for RedHat, but I'm struggling with the manual build required to get them to work. Googling so far didn't get me anywhere. Which drivers do I need, and where do I get them?

  Read the article

• Has anyone got "Creative Soundblaster X-Fi Surround 5.1 Pro" - (usb Interface) installed?

  - by Vivek Sharma

  Has anyone tried this external usb sound blaster on ubuntu. http://us.store.creative.com/Sound-Blaster-XFi-Surround-5.1-Pro/M/B0044DEDCA.htm. I have bought M-Audio Bx5a deluxe Studio Monitors for my T61. I think the onboard Intel HD sound card will not do any justice to these speakers. So I am looking for an external sound interface. I particularly liked this one as it is not very expensive and it has a volume control (speaker lack a central-front volume knob). Has anyone been able to use this on ubuntu. Also, if anyone would like to recommend me another option?

  Read the article

• How to Integrate Backbone.js with RESTful Web Services in 5 Minutes!

  - by Geertjan

  In NetBeans IDE 7.3, a Backbone.js file can be generated from a Java RESTful web service. The Backbone.js file contains complete CRUD functionality and your HTML5 application can immediately be deployed to make use of those features. Coupled with the NetBeans IDE two-way editing support for HTML5, via interaction with WebKit in Chrome, Backbone.js users have a completely new and powerful tool for coding their HTML5 applications. The above is illustrated via the brand new YouTube movie below: This makes NetBeans IDE 7.3 well suited as a learning tool for new Backbone.js users, as well as a productivity tool for those who are comfortable with Backbone.js already.

  Read the article

• need help installing NVIDIA 6600gt drivers

  - by user11852

  I have downloaded the drivers from NVIDIA ----NVIDIA-Linux-x86-260.19.36.run----It's for my Nvidia 6600gt APG 8x-- I'm using Ubuntu10.10. How do I get them installed, is there a way that my "additional drivers" program could download it somehow. I have been using Linux for 10 days, so my knowledge is limited. The drivers that are in my "additional drivers" program don't work. Freezes and black screen.

  Read the article

• How can I get my wireless webcam to work?

  - by hellocatfood

  I recently bought this wireless webcam. I'm having trouble getting it to work on Ubuntu 11.04. I ran lsusb and got the folowing information about the device Bus 006 Device 003: ID 0416:a91a Winbond Electronics Corp. I did a Google serach for teh device ID and this website informs me that it matches the LogiLink Wireless Webcam (so Maplin probably just rebranded this!). What this website states is that this device should work, which it doesn't. The problem I'm facing is that I don't get any actual video being streamed or shown. The built in microphone works and, when running Cheese, when I press the camera button on the webcam itself the software recognises that the button is pressed. On that note, when running cheese from the terminal with this webcam attached I get the following error libv4l2: error getting pixformat: Invalid argument libv4l2: error setting pixformat: Input/output error Any help is appreciated

  Read the article

• How do I fix this half screen problem?

  - by link1275

  I just installed 12.04, and my entire screen is being displayed entirely on the top half of my screen. The bottom half is always black or some technical garbage from the boot up. To interact with the bottom half of the screen I have to move the mouse over the screen to pull part of the bottom half of the screen on top and vice-versa. Does anyone know how to fix this? Also my computer told me, at startup, to go to here: http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware.

  Read the article

• arrays format (Javascript)

  - by João Melo

  i have a list of users, with minions, something like this: User52: minion10 minion12 User32: minion13 minion11 i've been keeping in an array where the "location" is the id, like this: Users: [52]User minions: [10]minion [12]minion [32]User minions: [13]minion [11]minion so i can access them easily like this: user[UserID].minions[MinionID] (ex: user[32].minions[11]) but when i print it or send it by json i get something like this: {,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,minion,,,,,,,,,,,,,,minion} but should i keep using like this or should i change to something like this: User = function(){ this.minions = ...; this.getMinion = function(value){ for(var m in this.minions){ if(this.minions[m].id == value){ return this.minions[m]; break; } } } } and get it like this: user.getMinion(MinionID); Question: i get better performance using a "short" array but using loops every time i need a minion, or using "long" arrays, but no need for loop and getting values directly from the id "name"?

  Read the article

• Line6 UX1 soundcard and Ubuntu

  - by the_drow

  I own a Line6 UX1 soundcard and I would like to make it work for Ubuntu. I have followed the instructions here and it worked. But at some point I upgraded my kernel version (not sure what uname -a prints but it's related) and it stopped working. Here's what uname -a prints: Linux ubuntu 2.6.32-29-generic 58-Ubuntu SMP Fri Feb 11 20:52:10 UTC 2011 x86_64 GNU/Linux I figured out that maybe it's installed per version so I used svn update and hit make again. My guess was right as it copied the relevant files to the new version's folder. I restarted and still nothing. Should I revert to an older version? Or is there a solution here?

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >