Search Results

Search found 17867 results on 715 pages for 'delete row'.

Page 660/715 | < Previous Page | 656 657 658 659 660 661 662 663 664 665 666 667  | Next Page >

• Ok it has been pointed out to me

  - by Ratman21

  That it seems my blog is more of poor me or pity me or I deserve a job blog.   Hmmm I wont say, I have not wined here as I have used this blog to vent my frustration on the whole out of work thing (lack of money, self worth, family issues and the never end bills coming my way) but, it was also me trying to reach to others in the same boat as well as advertising, hay I am out here, employers.   It was also said, that I don’t have any thing listed here on me, like a cover letter or resume. Well there is but, it was so many months and post ago. Also what I had posted is not current. So here is my most current cover and resume.   Scott L Newman 45219 Dutton Way Callahan, Fl. 32011 To Whom It May Concern: I am really interested in the IT vacancie that you have listed for your company. Maybe I don’t have all the qualifications you want (hold on don’t hit delete yet) yet! But maybe I do, as I have over 20 + years experience in "IT” RIGHT NOW.   Read the rest of my cover and my resume. You will see what my “IT” skills are and it will Show that I can to this work! I can bring to your company along with my, can do attitude, a broad range of skills, including: Certified CompTIA A+, Security+  and Network+ Technician §         2.5 years (NOC) Network experience on large Cisco based Wan – UK to Austria §         20 years experience MIS/DP – Yes I can do IBM mainframes and Tandem  non-stops too §         18 years experience as technical Help Desk support – panicking users, no problem §         18 years experience with PC/Server based system, intranet and internet systems §         10+ years experienced on: Microsoft Office, Windows XP and Data Network Fundamentals (YES I do windows) §         Strong trouble shooting skills for software, hard ware and circuit issues (and I can tell you what kind of horrors I had to face on all of them). §         Very experienced on working with customers on problems – again panicking users, no problem §         Working experience with Remote Access (VPN/SecurID) – I didn’t just study them I worked on/with them §         Skilled in getting info for and creating documentation for Operation procedures (I don’t just wait for them to give it to me I go out and get it. Waiting for info on working applications is, well dumb) Multiple software languages (Hey I have done some programming) And much more experiences in “IT” (Mortgage, stocks and financial information systems experience and have worked “IT” in a hospital) Can multitask, also have ability to adapt to change and learn quickly. (once was put in charge of a system that I had not worked with for over two years. Talk about having to relearn and adapt to changes but, I did it.) I would welcome the opportunity to further discuss this position with you. If you have questions or would like to schedule an interview, please contact me by phone at 904-879-4880 or on my cell 352-356-0945 or by e-mail at [email protected] or leave a message on my web site (http://beingscottnewman.webs.com/). I have enclosed/attached my resume for your review and I look forward to hearing from you.   Thank you for taking a moment to consider my cover letter and resume. I appreciate how busy you are. Sincerely, Scott L. Newman    Scott L. Newman 45219 Dutton Way, Callahan, FL 32011? H (904)879-4880 C (352)356-0945 ? [email protected] Web - http://beingscottnewman.webs.com/                                                       ______                                                                                       OBJECTIVE To obtain a Network Operation or Helpdesk position.     PROFILE Information Technology Professional with 20+ years of experience. Volunteer website creator and back-up sound technician at True Faith Christian Fellowship. CompTIA A+, Network+ and Security+ Certified.   TECHNICAL AND PROFESSIONAL SKILLS   §         Technical Support §         Frame Relay §         Microsoft Office Suite §         Inventory Management §         ISDN §         Windows NT/98/XP §         Client/Vendor Relations §         CICS §         Cisco Routers/Switches §         Networking/Administration §         RPG §         Helpdesk §         Website Design/Dev./Management §         Assembler §         Visio §         Programming §         COBOL IV §               EDUCATION ? New HorizonsComputerLearningCenter, Jacksonville, Florida – CompTIA A+, Security+ and Network+ Certified.             Currently working on CCNA Certification ?MottCommunity College, Flint, Michigan – Associates Degree - Data Processing and General Education ? Currently studying Japanese     PROFESSIONAL             TrueFaithChristianFellowshipChurch – Callahan, FL, October 2009 – Present Web site Tech ·        Web site Creator/tech, back up song leader and back up sound technician. Note church web site is (http://ambassadorsforjesuschrist.webs.com/) U.S. Census (temp employee) Feb. 23 to March 8, 2010 ·        Enumerator for NassauCounty   ThomasCreekBaptistChurch – Callahan, FL,     June 2008 – September 2009 Churchsound and video technician      ·        sound and video technician           Fidelity National Information Services ? Jacksonville, FL ? February 01, 2005 to October 28, 2008 Client Server Dev/Analyst I ·        Monitored Multiple Debit Card sites, Check Authorization customers and the Card Auth system (AuthNet) for problems with the sites, connections, servers (on our LAN) and/or applications ·        Night (NOC) Network operator for a large Wide Area Network (WAN) ·        Monitored Multiple Check Authorization customers for problems with circuits, routers and applications ·        Resolved circuit and/or router issues or assist circuit carrier in resolving issue ·        Resolved application problems or assist application support in resolution ·        Liaison between customer and application support ·        Maintained and updated the NetOps Operation procedures Guide ·        Kept the listing of equipment on the raised floor updated ·        Involved in the training of all Night Check and Card server operation operators ·        FNIS acquired Certegy in 2005. Was one of 3 kept on.   Certegy ? St.Pete, FL ? August 31, 2003 to February 1, 2005 Senior NetOps Operator(FNIS acquired Certegy in 2005 all of above jobs/skills were same as listed in FNIS) ·        Converting Documentation to Adobe format ·        Sole trainer of day/night shift System Management Center operators (SMC) ·        Equifax spun off Card/Check Dept. as Certegy. Certegy terminated contract with EDS. One of six in the whole IT dept that was kept on.   EDS  (Certegy Account) ? St.Pete, FL ? July 1, 1999 to August 31, 2003 Senior NetOps Operator ·        Equifax outsourced the NetOps dept. to EDS in 1999. ·        Same job skills as listed above for FNIS.   Equifax ? St.Pete&Tampa, FL ? January 1, 1991 to July 1, 1999 NetOps/Tandem Operator ·        All of the above for FNIS, except for circuit and router issues ·        Operated, monitored and trouble shot Tandem mainframe and servers on LAN ·        Supported in the operation of the Print, Tape and Microfiche rooms ·        Equifax acquired TelaCredit in 1991.   TelaCredit ? Tampa, FL ? June 28, 1989 to January 1, 1991 Tandem Operator ·        Operated and monitored Tandem Non-stop systems for Card and Check Auths ·        Operated multiple high-speed Laser printers and Microfiche printers ·        Mounted, filed and maintained 18 reel-to-reel mainframe tape drives, cartridges tape drives and tape library.

  Read the article

• Issues with ILMerge, Lambda Expressions and VS2010 merging?

  - by John Blumenauer

  A little Background For quite some time now, it’s been possible to merge multiple .NET assemblies into a single assembly using ILMerge in Visual Studio 2008.  This is especially helpful when writing wrapper assemblies for 3rd-party libraries where it’s desirable to minimize the number of assemblies for distribution.  During the merge process, ILMerge will take a set of assemblies and merge them into a single assembly.  The resulting assembly can be either an executable or a DLL and is identified as the primary assembly. Issue During a recent project, I discovered using ILMerge to merge assemblies containing lambda expressions in Visual Studio 2010 is resulting in invalid primary assemblies.  The code below is not where the initial issue was identified, I will merely use it to illustrate the problem at hand. In order to describe the issue, I created a console application and a class library for calculating a few math functions utilizing lambda expressions.  The code is available for download at the bottom of this blog entry. MathLib.cs using System; namespace MathLib { public static class MathHelpers { public static Func<double, double, double> Hypotenuse = (x, y) => Math.Sqrt(x * x + y * y); static readonly Func<int, int, bool> divisibleBy = (int a, int b) => a % b == 0; public static bool IsPrimeNumber(int x) { { for (int i = 2; i <= x / 2; i++) if (divisibleBy(x, i)) return false; return true; }; } } } Program.cs using System; using MathLib; namespace ILMergeLambdasConsole { class Program { static void Main(string[] args) { int n = 19; if (MathHelpers.IsPrimeNumber(n)) { Console.WriteLine(n + " is prime"); } else { Console.WriteLine(n + " is not prime"); } Console.ReadLine(); } } } Not surprisingly, the preceding code compiles, builds and executes without error prior to running the ILMerge tool.   ILMerge Setup In order to utilize ILMerge, the following changes were made to the project. The MathLib.dll assembly was built in release configuration and copied to the MathLib folder.  The following folder hierarchy was used for this example:   The project file for ILMergeLambdasConsole project file was edited to add the ILMerge post-build configuration.  The following lines were added near the bottom of the project file:  <Target Name="AfterBuild" Condition="'$(Configuration)' == 'Release'"> <Exec Command="&quot;..\..\lib\ILMerge\Ilmerge.exe&quot; /ndebug /out:@(MainAssembly) &quot;@(IntermediateAssembly)&quot; @(ReferenceCopyLocalPaths->'&quot;%(FullPath)&quot;', ' ')" /> <Delete Files="@(ReferenceCopyLocalPaths->'$(OutDir)%(DestinationSubDirectory)%(Filename)%(Extension)')" /> </Target> The ILMergeLambdasConsole project was modified to reference the MathLib.dll located in the MathLib folder above. ILMerge and ILMerge.exe.config was copied into the ILMerge folder shown above.  The contents of ILMerge.exe.config are: <?xml version="1.0" encoding="utf-8" ?> <configuration> <startup useLegacyV2RuntimeActivationPolicy="true"> <requiredRuntime safemode="true" imageVersion="v4.0.30319" version="v4.0.30319"/> </startup> </configuration> Post-ILMerge After compiling and building, the MathLib.dll assembly will be merged into the ILMergeLambdasConsole executable.  Unfortunately, executing ILMergeLambdasConsole.exe now results in a crash.  The ILMerge documentation recommends using PEVerify.exe to validate assemblies after merging.  Executing PEVerify.exe against the ILMergeLambdasConsole.exe assembly results in the following error:    Further investigation by using Reflector reveals the divisibleBy method in the MathHelpers class looks a bit questionable after the merge.     Prior to using ILMerge, the same divisibleBy method appeared as the following in Reflector: It’s pretty obvious something has gone awry during the merge process.  However, this is only occurring when building within the Visual Studio 2010 environment.  The same code and configuration built within Visual Studio 2008 executes fine.  I’m still investigating the issue.  If anyone has already experienced this situation and solved it, I would love to hear from you.  However, as of right now, it looks like something has gone terribly wrong when executing ILMerge against assemblies containing Lambdas in Visual Studio 2010. Solution Files ILMergeLambdaExpression

  Read the article

• 5 Android Keyboard Replacements to Help You Type Faster

  - by Chris Hoffman

  Android allows developers to replace its keyboard with their own keyboard apps. This has led to experimentation and great new features, like the gesture-typing feature that’s made its way into Android’s official keyboard after proving itself in third-party keyboards. This sort of customization isn’t possible on Apple’s iOS or even Microsoft’s modern Windows environments. Installing a third-party keyboard is easy — install it from Google Play, launch it like another app, and it will explain how to enable it. Google Keyboard Google Keyboard is Android’s official keyboard, as seen on Google’s Nexus devices. However, there’s a good chance your Android smartphone or tablet comes with a keyboard designed by its manufacturer instead. You can install the Google Keyboard from Google Play, even if your device doesn’t come with it. This keyboard offers a wide variety of features, including a built-in gesture-typing feature, as popularized by Swype. It also offers prediction, including full next-word prediction based on your previous word, and includes voice recognition that works offline on modern versions of Android. Google’s keyboard may not offer the most accurate swiping feature or the best autocorrection, but it’s a great keyboard that feels like it belongs in Android. SwiftKey SwiftKey costs $4, although you can try it free for one month. In spite of its price, many people who rarely buy apps have been sold on SwiftKey. It offers amazing auto-correction and word-prediction features. Just mash away on your touch-screen keyboard, typing as fast as possible, and SwiftKey will notice your mistakes and type what you actually meant to type. SwiftKey also now has built-in support for gesture-typing via SwiftKey Flow, so you get a lot of flexibility. At $4, SwiftKey may seem a bit pricey, but give the month-long trial a try. A great keyboard makes all the typing you do everywhere on your phone better. SwiftKey is an amazing keyboard if you tap-to-type rather than swipe-to-type. Swype While other keyboards have copied Swype’s swipe-to-type feature, none have completely matched its accuracy. Swype has been designing a gesture-typing keyboard for longer than anyone else and its gesture feature still seems more accurate than its competitors’ gesture support. If you use gesture-typing all the time, you’ll probably want to use Swype. Swype can now be installed directly from Google Play without the old, tedious process of registering a beta account and sideloading the Swype app. Swype offers a month-long free trial and the full version is available for $1 afterwards. Minuum Minuum is a crowdfunded keyboard that is currently still in beta and only supports English. We include it here because it’s so interesting — it’s a great example of the kind of creativity and experimentation that happens when you allow developers to experiment with their own forms of keyboard. Minuum uses a tiny, minimum keyboard that frees up your screen space, so your touch-screen keyboard doesn’t hog your device’s screen. Rather than displaying a full keyboard on your screen, Minuum displays a single row of letters.  Each letter is small and may be difficult to hit, but that doesn’t matter — Minuum’s smart autocorrection algorithms interpret what you intended to type rather than typing the exact letters you press. Just swipe to the right to type a space and accept Minuum’s suggestion. At $4 for a beta version with no trial, Minuum may seem a bit pricy. But it’s a great example of the flexibility Android allows. If there’s a problem with this keyboard, it’s that it’s a bit late — in an age of 5″ smartphones with 1080p screens, full-size keyboards no longer feel as cramped. MessagEase MessagEase is another example of a new take on text input. Thankfully, this keyboard is available for free. MessagEase presents all letters in a nine-button grid. To type a common letter, you’d tap the button. To type an uncommon letter, you’d tap the button, hold down, and swipe in the appropriate direction. This gives you large buttons that can work well as touch targets, especially when typing with one hand. Like any other unique twist on a traditional keyboard, you’d have to give it a few minutes to get used to where the letters are and the new way it works. After giving it some practice, you may find this is a faster way to type on a touch-screen — especially with one hand, as the targets are so large. Google Play is full of replacement keyboards for Android phones and tablets. Keyboards are just another type of app that you can swap in. Leave a comment if you’ve found another great keyboard that you prefer using. Image Credit: Cheon Fong Liew on Flickr     

  Read the article

• Polite busy-waiting with WRPAUSE on SPARC

  - by Dave

  Unbounded busy-waiting is an poor idea for user-space code, so we typically use spin-then-block strategies when, say, waiting for a lock to be released or some other event. If we're going to spin, even briefly, then we'd prefer to do so in a manner that minimizes performance degradation for other sibling logical processors ("strands") that share compute resources. We want to spin politely and refrain from impeding the progress and performance of other threads — ostensibly doing useful work and making progress — that run on the same core. On a SPARC T4, for instance, 8 strands will share a core, and that core has its own L1 cache and 2 pipelines. On x86 we have the PAUSE instruction, which, naively, can be thought of as a hardware "yield" operator which temporarily surrenders compute resources to threads on sibling strands. Of course this helps avoid intra-core performance interference. On the SPARC T2 our preferred busy-waiting idiom was "RD %CCR,%G0" which is a high-latency no-nop. The T4 provides a dedicated and extremely useful WRPAUSE instruction. The processor architecture manuals are the authoritative source, but briefly, WRPAUSE writes a cycle count into the the PAUSE register, which is ASR27. Barring interrupts, the processor then delays for the requested period. There's no need for the operating system to save the PAUSE register over context switches as it always resets to 0 on traps. Digressing briefly, if you use unbounded spinning then ultimately the kernel will preempt and deschedule your thread if there are other ready threads than are starving. But by using a spin-then-block strategy we can allow other ready threads to run without resorting to involuntary time-slicing, which operates on a long-ish time scale. Generally, that makes your application more responsive. In addition, by blocking voluntarily we give the operating system far more latitude regarding power management. Finally, I should note that while we have OS-level facilities like sched_yield() at our disposal, yielding almost never does what you'd want or naively expect. Returning to WRPAUSE, it's natural to ask how well it works. To help answer that question I wrote a very simple C/pthreads benchmark that launches 8 concurrent threads and binds those threads to processors 0..7. The processors are numbered geographically on the T4, so those threads will all be running on just one core. Unlike the SPARC T2, where logical CPUs 0,1,2 and 3 were assigned to the first pipeline, and CPUs 4,5,6 and 7 were assigned to the 2nd, there's no fixed mapping between CPUs and pipelines in the T4. And in some circumstances when the other 7 logical processors are idling quietly, it's possible for the remaining logical processor to leverage both pipelines. Some number T of the threads will iterate in a tight loop advancing a simple Marsaglia xor-shift pseudo-random number generator. T is a command-line argument. The main thread loops, reporting the aggregate number of PRNG steps performed collectively by those T threads in the last 10 second measurement interval. The other threads (there are 8-T of these) run in a loop busy-waiting concurrently with the T threads. We vary T between 1 and 8 threads, and report on various busy-waiting idioms. The values in the table are the aggregate number of PRNG steps completed by the set of T threads. The unit is millions of iterations per 10 seconds. For the "PRNG step" busy-waiting mode, the busy-waiting threads execute exactly the same code as the T worker threads. We can easily compute the average rate of progress for individual worker threads by dividing the aggregate score by the number of worker threads T. I should note that the PRNG steps are extremely cycle-heavy and access almost no memory, so arguably this microbenchmark is not as representative of "normal" code as it could be. And for the purposes of comparison I included a row in the table that reflects a waiting policy where the waiting threads call poll(NULL,0,1000) and block in the kernel. Obviously this isn't busy-waiting, but the data is interesting for reference. _table { border:2px black dotted; margin: auto; width: auto; } _tr { border: 2px red dashed; } _td { border: 1px green solid; } _table { border:2px black dotted; margin: auto; width: auto; } _tr { border: 2px red dashed; } td { background-color : #E0E0E0 ; text-align : right ; } th { text-align : left ; } td { background-color : #E0E0E0 ; text-align : right ; } th { text-align : left ; } Aggregate progress T = #worker threads Wait Mechanism for 8-T threadsT=1T=2T=3T=4T=5T=6T=7T=8 Park thread in poll() 32653347334833483348334833483348 no-op 415 831 124316482060249729303349 RD %ccr,%g0 "pause" 14262429269228623013316232553349 PRNG step 412 829 124616702092251029303348 WRPause(8000) 32443361333133483349334833483348 WRPause(4000) 32153308331533223347334833473348 WRPause(1000) 30853199322432513310334833483348 WRPause(500) 29173070315032223270330933483348 WRPause(250) 26942864294930773205338833483348 WRPause(100) 21552469262227902911321433303348

  Read the article

• How to Apply a Business Card Template to a Contact and Customize it in Outlook 2013

  - by Lori Kaufman

  If you want to add a business card template to an existing contact in Outlook, you can do so without having to enter all of the information again. We will also show you how to customize the layout and format of the text on the card. Microsoft provides a couple of business card templates you can use. We will use their Blue Sky template as an example. To open the archive file for the template you downloaded, double-click on the .cab file. NOTE: You can also use a tool like 7-Zip to open the archive. A new Extract tab becomes available under Compressed Folder Tools and the files in the archive are listed. Select the .vcf file in the list of files. This automatically activates the Extract tab. Click Extract To and select a location or select Choose location if the desired location is not on the drop-down menu. Select a folder in which you want to save the .vcf file on the Copy Items dialog box and click Copy. NOTE: Use the Make New Folder button to create a new folder for the location, if desired. Double-click on the .vcf file that you copied out of the .cab archive file. By default, .vcf files are associated with Outlook so, when you double-click on a .vcf file, it automatically opens in a Contact window in Outlook. Change the Full Name to match the existing contact to which you want to apply this template. Delete the other contact info from the template. If you want to add any additional information not in the existing contact, enter it. Click Save & Close to save the contact with the new template. The Duplicate Contact Detected dialog box displays. To update the existing contact, select the Update information of selected Contact option. Click Update. NOTE: If you want to create a new contact from this template, select the Add new contact option. With the Contacts folder open (the People link on the Navigation Bar), click Business Card in the Current View section of the Home tab. You may notice that not all the fields from your contact display on the business card you just updated. Double-click on the contact to update the contact and the business card. On the Contact window, right-click on the image of the business card and select Edit Business Card from the popup menu. The Edit Business Card dialog box displays. You can change the design of the card, including changing he background color or image. The Fields box allows you to specify which fields display on the business card and in what order. Notice, in our example, that Company is listed below the Full Name, but no text displays on the business card below the name. That’s because we did not enter any information for Company in the Contact. We have information in Job Title. So, we select Company and click Remove to remove that field. Now, we want to add Job Title. First, select the field below which you want to add the new field. We select Full Name to add the Job Title below that. Then, we click Add and select Organization | Job Title from the popup menu to insert the Job Title. To make the Job Title white like the name, we select Job Title in the list of Fields and click the Font Color button in the Edit section. On the Color dialog box, select the color you want to use for the text in the selected field. Click OK. You can also make text bold, italic, or underlined. We chose to make the Job Title bold and the Full Name bold and italic. We also need to remove the Business Phone because this contact only has a mobile phone number. So, we add a Mobile Phone from the Phone submenu. Then, we need to remove enough blank lines so the Mobile Phone is visible on the card. We also added a website and email address and removed more blank lines so they are visible. You can also move text to the right side of the card or make it centered on the card. We also changed the color of the bottom three lines to blue. Click OK to accept your changes and close the dialog box. Your new business card design displays on the Contact window. Click Save & Close to save the changes you made to the business card for this contact and close the Contact window. The final design of the business card displays in the Business Card view on the People screen. If you have a signature that contains the business card for the contact you just updated, you will also need to update the signature by removing the business card and adding it again using the Business Card button in the Signature editor. You can also add the updated Business Card to a signature without the image or without the vCard (.vcf) file.     

  Read the article

• Ransomware: Why This New Malware is So Dangerous and How to Protect Yourself

  - by Chris Hoffman

  Ransomware is a type of malware that tries to extort money from you. One of the nastiest examples, CryptoLocker, takes your files hostage and holds them for ransom, forcing you to pay hundreds of dollars to regain access. Most malware is no longer created by bored teenagers looking to cause some chaos. Much of the current malware is now produced by organized crime for profit and is becoming increasingly sophisticated. How Ransomware Works Not all ransomware is identical. The key thing that makes a piece of malware “ransomware” is that it attempts to extort a direct payment from you. Some ransomware may be disguised. It may function as “scareware,” displaying a pop-up that says something like “Your computer is infected, purchase this product to fix the infection” or “Your computer has been used to download illegal files, pay a fine to continue using your computer.” In other situations, ransomware may be more up-front. It may hook deep into your system, displaying a message saying that it will only go away when you pay money to the ransomware’s creators. This type of malware could be bypassed via malware removal tools or just by reinstalling Windows. Unfortunately, Ransomware is becoming more and more sophisticated. One of the latest examples, CryptoLocker, starts encrypting your personal files as soon as it gains access to your system, preventing access to the files without knowing the encryption key. CryptoLocker then displays a message informing you that your files have been locked with encryption and that you have just a few days to pay up. If you pay them $300, they’ll hand you the encryption key and you can recover your files. CryptoLocker helpfully walks you through choosing a payment method and, after paying, the criminals seem to actually give you a key that you can use to restore your files. You can never be sure that the criminals will keep their end of the deal, of course. It’s not a good idea to pay up when you’re extorted by criminals. On the other hand, businesses that lose their only copy of business-critical data may be tempted to take the risk — and it’s hard to blame them. Protecting Your Files From Ransomware This type of malware is another good example of why backups are essential. You should regularly back up files to an external hard drive or a remote file storage server. If all your copies of your files are on your computer, malware that infects your computer could encrypt them all and restrict access — or even delete them entirely. When backing up files, be sure to back up your personal files to a location where they can’t be written to or erased. For example, place them on a removable hard drive or upload them to a remote backup service like CrashPlan that would allow you to revert to previous versions of files. Don’t just store your backups on an internal hard drive or network share you have write access to. The ransomware could encrypt the files on your connected backup drive or on your network share if you have full write access. Frequent backups are also important. You wouldn’t want to lose a week’s worth of work because you only back up your files every week. This is part of the reason why automated back-up solutions are so convenient. If your files do become locked by ransomware and you don’t have the appropriate backups, you can try recovering them with ShadowExplorer. This tool accesses “Shadow Copies,” which Windows uses for System Restore — they will often contain some personal files. How to Avoid Ransomware Aside from using a proper backup strategy, you can avoid ransomware in the same way you avoid other forms of malware. CryptoLocker has been verified to arrive through email attachments, via the Java plug-in, and installed on computers that are part of the Zeus botnet. Use a good antivirus product that will attempt to stop ransomware in its tracks. Antivirus programs are never perfect and you could be infected even if you run one, but it’s an important layer of defense. Avoid running suspicious files. Ransomware can arrive in .exe files attached to emails, from illicit websites containing pirated software, or anywhere else that malware comes from. Be alert and exercise caution over the files you download and run. Keep your software updated. Using an old version of your web browser, operating system, or a browser plugin can allow malware in through open security holes. If you have Java installed, you should probably uninstall it. For more tips, read our list of important security practices you should be following. Ransomware — CryptoLocker in particular — is brutally efficient and smart. It just wants to get down to business and take your money. Holding your files hostage is an effective way to prevent removal by antivirus programs after it’s taken root, but CryptoLocker is much less scary if you have good backups. This sort of malware demonstrates the importance of backups as well as proper security practices. Unfortunately, CryptoLocker is probably a sign of things to come — it’s the kind of malware we’ll likely be seeing more of in the future.     

  Read the article

• The Sound of Two Toilets Flushing: Constructive Criticism for Virgin Atlantic Complaints Department

  - by Geertjan

  I recently had the experience of flying from London to Johannesburg and back with Virgin Atlantic. The good news was that it was the cheapest flight available and that the take off and landing were absolutely perfect. Hence I really have no reason to complain. Instead, I'd like to offer some constructive criticism which hopefully Richard Branson will find sometime while googling his name. Or maybe someone from the Virgin Atlantic Complaints Department will find it, whatever, just want to put this information out there. Arrangement of restroom facilities. Maybe next time you design an airplane, consider not putting your toilets at a right angle right next to your rows of seats. Being able to reach, without even needing to stretch your arm, from your seat to close, yet again, a toilet door that someone, someone obviously sitting very far from the toilets, carelessly forgot to close is not an indicator of quality interior design. Have you noticed how all other airplanes have their toilets in a cubicle separated from the rows of seats? On those airplanes, people sitting in the seats near the toilets are not constantly being woken up throughout the night whenever someone enters/exits the toilet, whenever the light in the toilet is suddenly switched on, and whenever one of the toilets flushes. Bonus points for Virgin Atlantic passengers in the seats adjoining the toilets is when multiple toilets are flushed simultaneously and multiple passengers enter/exit them at the same time, a bit like an unasked for low budget musical of suddenly illuminated grumpy people in crumpled clothes. What joy that brings at 3 AM is hard to describe. Seats with extra leg room. You know how other airplanes have the seats with the extra leg room? You know what those seats tend to have? Extra leg room. It's really interesting how Virgin Atlantic's seats with extra leg room actually have no extra leg room at all. It should have been a give away, the fact that these special seats are found in the same rows as the standard seats, rather than on the cusp of real glory which is where most airlines put their extra leg room seats, with the only actual difference being that they have a slightly different color. Had you called them "seats with a different color" (i.e., almost not quite green, rather than something vaguely hinting at blue), at least I'd have known what I was getting. Picture the joy at 3 AM, rudely awakened from nightmarish slumber, partly grateful to have been released from a grayish dream of faceless zombies resembling one or two of those in a recent toilet line, by multiple adjoining toilets flushing simultaneously, while you're sitting in a seat with extra leg room that has exactly as much leg room as the seats in neighboring rows. You then have a choice of things to be sincerely annoyed about. Food from the '80's. In the '80's, airplane food came in soggy containers and even breakfast, the most important meal of the day, was a sad heap of vaguely gray colors. The culinary highlight tended to be a squashed tomato, which must have been mashed to a pulp with a brick prior to being regurgitated by a small furry animal, and there was also always a piece of immensely horrid pumpkin, as well as a slice of spongy something you'd never seen before. Sausages and mash at 6 AM on an airplane was always a heavy lump of horribleness. Thankfully, all airlines throughout the world changed from this puke inducing strategy around 1987 sometime. Not Virgin Atlantic, of course. The fatty sausages and mash are still there, bringing you flashbacks to Duran Duran, which is what you were listening to (on your walkman) the last time you saw it in an airplane. Even the golden oldie "squashed tomato attached by slime to three wet peas" is on the menu. How wonderful to have all this in a cramped seat with a long row of early morning bleariness lined up for the toilets, right at your side, bumping into your elbow, groggily, one by one, one after another, more and more, fumble-open-door-silence-flush-fumble-open-door, and on and on, while you tentatively push your fork through a soggy pile of colorless mush, fighting the urge to throw up on the stinky socks of whatever nightmarish zombie is bumping into your elbow at the time. But, then again, the plane landed without a hitch, in fact, extremely smoothly, so I'm certainly not blaming the pilots.

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #004

  - by pinaldave

  Here is the list of curetted articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2006 Auto Generate Script to Delete Deprecated Fields in Current Database In early career everytime I have to drop a column, I had hard time doing it because I was scared what if that column was needed somewhere in the code. Due to this fear I never dropped any column. I just renamed the column. If the column which I renamed was needed afterwards it was very easy to rename it back again. However, it is not recommended to keep the deleted column renamed in the database. At every interval I used to drop the columns which was prefixed with specific word. This script is 6 years old but still works. Give it a look, I am open for improvements. 2007 Shrinking Truncate Log File – Log Full – Part 2 Shrinking database or mdf file is indeed bad thing and it creates lots of problems. However, once in a while there is legit requirement to shrink the log file – a very rare one. In the rare occasion shrinking or truncating the log file may be the only solution. However, one should make sure to take backup before and after the truncate or shrink as in case of a disaster they can be very useful. Remember that truncating log file will break the log chain and while restore it can create major issue. Anyway, use this feature with caution. 2008 Simple Use of Cursor to Print All Stored Procedures of Database Including Schema This is a very interesting requirement I used to face in my early career days, I needed to print all the Stored procedures of my database. Interesting enough I had written a cursor to do so. Today when I look back at this stored procedure, I believe there will be a much cleaner way to do the same task, however, I still use this SP quite often when I have to document all the stored procedures of my database. Interesting Observation about Order of Resultset without ORDER BY In industry many developers avoid using ORDER BY clause to display the result in particular order thinking that Index is enforcing the order. In this interesting example, I demonstrate that without using ORDER BY, same table and similar query can return different results. Query optimizer always returns results using any method which is optimized for performance. The learning is There is no order unless ORDER BY is used. 2009 Size of Index Table – A Puzzle to Find Index Size for Each Index on Table I asked this puzzle earlier where I asked how to find the Index size for each of the tables. The puzzle was very well received and lots of interesting answers were received. To answer this question I have written following blog posts. I suggest this weekend you try to solve this problem and see if you can come up with a better solution. If not, well here are the solutions. Solution 1 | Solution 2 | Solution 3 Understanding Table Hints with Examples Hints are options and strong suggestions specified for enforcement by the SQL Server query processor on DML statements. The hints override any execution plan the query optimizer might select for a query. The SQL Server Query optimizer is a very smart tool and it makes a better selection of execution plan. Suggesting hints to the Query Optimizer should be attempted when absolutely necessary and by experienced developers who know exactly what they are doing (or in development as a way to experiment and learn). Interesting Observation – TOP 100 PERCENT and ORDER BY I have seen developers and DBAs using TOP very causally when they have to use the ORDER BY clause. Theoretically, there is no need of ORDER BY in the view at all. All the ordering should be done outside the view and view should just have the SELECT statement in it. It was quite common that to save this extra typing by including ordering inside of the view. At several instances developers want a complete resultset and for the same they include TOP 100 PERCENT along with ORDER BY, assuming that this will simulate the SELECT statement with ORDER BY. 2010 SQLPASS Nov 8-11, 2010-Seattle – An Alternative Look at Experience In year 2010 I attended most prestigious SQL Server event SQLPASS between Nov 8-11, 2010 at Seattle. I have only one expression for the event - Best Summit Ever. Instead of writing about my usual routine or the event, I wrote about the interesting things I did and how I felt about it! When I go back and read it, I feel that this is the best event I attended in year 2010. Change Database Access to Single User Mode Using SSMS Image says all. 2011 SQL Server 2012 has introduced new analytic functions. These functions were long awaited and I am glad that they are now here. Before when any of this function was needed, people used to write long T-SQL code to simulate these functions. But now there’s no need of doing so. Having available native function also helps performance as well readability. Function SQLAuthority MSDN CUME_DIST CUME_DIST CUME_DIST FIRST_VALUE FIRST_VALUE FIRST_VALUE LAST_VALUE LAST_VALUE LAST_VALUE LEAD LEAD LEAD LAG LAG LAG PERCENTILE_CONT PERCENTILE_CONT PERCENTILE_CONT PERCENTILE_DISC PERCENTILE_DISC PERCENTILE_DISC PERCENT_RANK PERCENT_RANK PERCENT_RANK Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• java.util.zip.ZipException: Error opening file When Deploying an Application to Weblogic Server

  - by lmestre

  The latest weeks we had a hard time trying to solve a deployment issue.* WebLogic Server 10.3.6* Target: WLS Cluster<21-10-2013 05:29:40 PM CLST> <Error> <Console> <BEA-240003> <Console encountered the following error weblogic.management.DeploymentException:        at weblogic.servlet.internal.WarDeploymentFactory.findOrCreateComponentMBeans(WarDeploymentFactory.java:69)        at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)        at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)        at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)        at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:89)        at weblogic.management.deploy.internal.MBeanConverter.createApplicationForAppDeployment(MBeanConverter.java:67)        at weblogic.management.deploy.internal.MBeanConverter.setupNew81MBean(MBeanConverter.java:315)        at weblogic.deploy.internal.targetserver.operations.ActivateOperation.compatibilityProcessor(ActivateOperation.java:81)        at weblogic.deploy.internal.targetserver.operations.AbstractOperation.setupPrepare(AbstractOperation.java:295)        at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:97)        at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)        at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)        at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)        at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)        at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)        at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)        at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)        at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)Caused by: java.util.zip.ZipException: Error opening file - C:\Oracle\Middleware\user_projects\domains\MyDomain\servers\MyServer\stage\myapp\myapp.war Message - error in opening zip file        at weblogic.servlet.utils.WarUtils.existsInWar(WarUtils.java:87)        at weblogic.servlet.utils.WarUtils.isWebServices(WarUtils.java:76)        at weblogic.servlet.internal.WarDeploymentFactory.findOrCreateComponentMBeans(WarDeploymentFactory.java:61) So the first idea you have with that error is that the war file is corrupted or has incorrect privileges.        We tried:1. Unzipping the  war file, the file was perfect.2. Checking the size, same size as in other environments.3. Checking the ownership of the file, same as in other environments.4. Checking the permissions of the file, same as other applications.Then we accepted the file was fine, so we tried enabling some deployment debugs, but no clues.We also tried:1. Delete all contents of <MyDomain/servers/<MyServer>/tmp> a and <MyDomain/servers/<MyServer>/cache> folders, the issue persisted.2. When renaming the application the deployment was sucessful3. When targeting to the Admin Server, deployment was also working.4. Using 'Copy this application onto every target for me' didn't help either.Finally, my friend 'Test Case' solved the issue again.I saw this name in the config.xml<jdbc-system-resource>    <name>myapp</name>    <target></target>    <descriptor-file-name>jdbc/myapp-jdbc.xml</descriptor-file-name>  </jdbc-system-resource> So, it turned out that customer had created a DataSource with the same name as the application 'myapp' in the above example.By deleting the datasource and created another exact DataSource with a different name the issue was solved.At this point, Do you know Why 'java.util.zip.ZipException: Error opening file' was occurring?Because all names is WebLogic Server need to be unique.References: http://docs.oracle.com/cd/E23943_01/web.1111/e13709/setup.htm"Assigning Names to WebLogic Server ResourcesMake sure that each configurable resource in your WebLogic Server environment has a unique name. Each, domain, server, machine, cluster, JDBC data source, virtual host, or other resource must have a unique name." Enjoy!

  Read the article

• Think before you animate

  - by David Paquette

  Animations are becoming more and more common in our applications.  With technologies like WPF, Silverlight and jQuery, animations are becoming easier for developers to use (and abuse).  When used properly, animation can augment the user experience.  When used improperly, animation can degrade the user experience.  Sometimes, the differences can be very subtle. I have recently made use of animations in a few projects and I very quickly realized how easy it is to abuse animation techniques.  Here are a few things I have learned along the way. 1) Don’t animate for the sake of animating We’ve all seen the PowerPoint slides with annoying slide transitions that animate 20 different ways.  It’s distracting and tacky.  The same holds true for your application.  While animations are fun and becoming easy to implement, resist the urge to use the technology just because you think the technology is amazing.   2) Animations should (and do) have meaning I recently built a simple Windows Phone 7 (WP7) application, Steeped (download it here).  The application has 2 pages.  The first page lists a number of tea types.  When the user taps on one of the tea types, the application navigates to the second page with information about that tea type and some options for the user to choose from.       One of the last things I did before submitting Steeped to the marketplace was add a page transition between the 2 pages.  I choose the Slide / Fade Out transition.  When the user selects a tea type, the main page slides to the left and fades out.  At the same time, the details page slides in from the right and fades in.  I tested it and thought it looked great so I submitted the app.  A few days later, I asked a friend to try the app.  He selected a tea type, and I was a little surprised by how he used the app.  When he wanted to navigate back to the main page, instead of pressing the back button on the phone, he tried to use a swiping gesture.  Of course, the swiping gesture did nothing because I had not implemented that feature.  After thinking about it for a while, I realized that the page transition I had chosen implied a particular behaviour.  As a user, if an action I perform causes an item (in this case the page) to move, then my expectation is that I should be able to move it back.  I have since added logic to handle the swipe gesture and I think the app flows much better now. When using animation, it pays to ask yourself:  What story does this animation tell my users?   3) Watch the replay Some animations might seem great initially but can get annoying over time.  When you use an animation in your application, make sure you try using it over and over again to make sure it doesn’t get annoying.  When I add an animation, I try watch it at least 25 times in a row.  After watching the animation repeatedly, I can make a more informed decision whether or not I should keep the animation.  Often, I end up shortening the length of the animations.   4) Don’t get in the users way An animation should never slow the user down.  When implemented properly, an animation can give a perceived bump in performance.  A good example of this is a the page transitions in most of the built in apps on WP7.  Obviously, these page animations don’t make the phone any faster, but they do provide a more responsive user experience.  Why?  Because most of the animations begin as soon as the user has performed some action.  The destination page might not be fully loaded yet, but the system responded immediately to user action, giving the impression that the system is more responsive.  If the user did not see anything happen until after the destination page was fully loaded, the application would feel clumsy and slow.  Also, it is important to make sure the animation does not degrade the performance (or perceived performance) of the application.   Jut a few things to consider when using animations.  As is the case with many technologies, we often learn how to misuse it before we learn how to use it effectively.

  Read the article

• Problems with my slotgame

  - by Raiden2k

  I'm coding a slot game for learning. Here's the source code. My questions are below. unit Unit1; {$mode objfpc}{$H+} interface uses Classes, SysUtils, Windows, FileUtil, Forms, Controls, Graphics, Dialogs, StdCtrls, ExtCtrls, ComCtrls, Menus, ActnList, Spin, FileCtrl; type { TForm1 } TForm1 = class(TForm) FloatSpinEdit1: TFloatSpinEdit; Guthabenlb: TLabel; s4: TLabel; s5: TLabel; s6: TLabel; s7: TLabel; s8: TLabel; s9: TLabel; Timer3: TTimer; Winlb: TLabel; Loselb: TLabel; slotbn: TButton; s1: TLabel; s2: TLabel; s3: TLabel; Timer1: TTimer; Timer2: TTimer; procedure FormCreate(Sender: TObject); procedure slotbnClick(Sender: TObject); procedure Timer1Timer(Sender: TObject); procedure Timer2Timer(Sender: TObject); procedure Timer3Timer(Sender: TObject); private { private declarations } FRollen : array [0..2, 0..9] of String; public { public declarations } end; var Form1: TForm1; wins,loses : Integer; guthaben : Double = 10; implementation {$R *.lfm} { TForm1 } procedure TForm1.slotbnClick(Sender: TObject); begin Guthaben := Guthaben - 1.00; Guthabenlb.Caption := FloatToStr(guthaben) + (' €'); Timer1.Enabled := True; Timer2.Enabled := True; slotbn.Enabled := false; end; procedure TForm1.FormCreate(Sender: TObject); var i: integer; j: integer; n: integer; digits: TStringlist; begin Digits := TStringList.Create; try for i := low(FRollen) to high(FRollen) do begin for j := low(FRollen[i]) to high(FRollen[i]) do Digits.Add(IntToStr(j)); for j := low(FRollen[i]) to high(FRollen[i]) do begin n := Random(Digits.Count); FRollen[i, j] := Digits[n]; Digits.Delete(n); end; end finally Digits.Free; end; for i:=low(FRollen) to high(FRollen) do begin end; end; //==================================================================================================\\ // Drehen der Slots im Zufallsmodus //==================================================================================================// procedure TForm1.Timer1Timer(Sender: TObject); begin s1.Caption := IntToStr(Random(9)); s2.Caption := IntToStr(Random(9)); s3.Caption := IntToStr(Random(9)); s4.Caption := IntToStr(Random(9)); s5.Caption := IntToStr(Random(9)); s6.Caption := IntToStr(Random(9)); s7.Caption := IntToStr(Random(9)); s8.Caption := IntToStr(Random(9)); s9.Caption := IntToStr(Random(9)); end; //==================================================================================================// //===================================================================================================\\ // Gewonnen / Verloren abfrage //===================================================================================================// procedure TForm1.Timer2Timer(Sender: TObject); begin Timer1.Enabled := False; Timer2.Enabled := false; if (s1.Caption = s5.Caption) and (s1.Caption = s9.Caption) then begin Guthaben := Guthaben + 5.00; Inc(wins); end else if (s1.Caption = s4.Caption) and (s1.Caption = s7.Caption) then begin Guthaben := Guthaben + 5.00; Inc(wins); end else if (s2.Caption = s5.Caption) and (s2.Caption = s8.Caption) then begin Guthaben := Guthaben + 5.00; Inc(wins); end else if (s3.Caption = s6.Caption) and (s3.Caption = s9.Caption) then begin Guthaben := Guthaben + 5.00; Inc(wins); end else if (s3.Caption = s5.Caption) and (s3.Caption = s7.Caption) then begin Guthaben := Guthaben + 5.00; Inc(wins); end else Inc(loses); slotbn.Enabled := True; Loselb.Caption := 'Loses: ' + IntToStr(loses); Winlb.Caption := 'Wins: ' + IntTostr(Wins); end; procedure TForm1.Timer3Timer(Sender: TObject); begin if (guthaben = 0) or (guthaben < 0) then begin Timer3.Enabled := False; MessageBox(handle,'Du hast verloren!','Verlierer!',MB_OK); close(); end; end; //======================================================================================================\\ end. How can I replace the labels through icons 16 x 16 pixels? How can I adjust the winning sum according to the icons? (for example 3 crowns give you 40 € and 3 apples only 10 €) How can I adjust the winning sum with a sum for every round?

  Read the article

• Developing Schema Compare for Oracle (Part 5): Query Snapshots

  - by Simon Cooper

  If you've emailed us about a bug you've encountered with the EAP or beta versions of Schema Compare for Oracle, we probably asked you to send us a query snapshot of your databases. Here, I explain what a query snapshot is, and how it helps us fix your bug. Problem 1: Debugging users' bug reports When we started the Schema Compare project, we knew we were going to get problems with users' databases - configurations we hadn't considered, features that weren't installed, unicode issues, wierd dependencies... With SQL Compare, users are generally happy to send us a database backup that we can restore using a single RESTORE DATABASE command on our test servers and immediately reproduce the problem. Oracle, on the other hand, would be a lot more tricky. As Oracle generally has a 1-to-1 mapping between instances and databases, any databases users sent would have to be restored to their own instance. Furthermore, the number of steps required to get a properly working database, and the size of most oracle databases, made it infeasible to ask every customer who came across a bug during our beta program to send us their databases. We also knew that there would be lots of issues with data security that would make it hard to get backups. So we needed an easier way to be able to debug customers issues and sort out what strange schema data Oracle was returning. Problem 2: Test execution time Another issue we knew we would have to solve was the execution time of the tests we would produce for the Schema Compare engine. Our initial prototype showed that querying the data dictionary for schema information was going to be slow (at least 15 seconds per database), and this is generally proportional to the size of the database. If you're running thousands of tests on the same databases, each one registering separate schemas, not only would the tests would take hours and hours to run, but the test servers would be hammered senseless. The solution To solve these, we needed to be able to populate the schema of a database without actually connecting to it. Well, the IDataReader interface is the primary way we read data from an Oracle server. The data dictionary queries we use return their data in terms of simple strings and numbers, which we then process and reconstruct into an object model, and the results of these queries are identical for identical schemas. So, we can record the raw results of the queries once, and then replay these results to construct the same object model as many times as required without needing to actually connect to the original database. This is what query snapshots do. They are binary files containing the raw unprocessed data we get back from the oracle server for all the queries we run on the data dictionary to get schema information. The core of the query snapshot generation takes the results of the IDataReader we get from running queries on Oracle, and passes the row data to a BinaryWriter that writes it straight to a file. The query snapshot can then be replayed to create the same object model; when the results of a specific query is needed by the population code, we can simply read the binary data stored in the file on disk and present it through an IDataReader wrapper. This is far faster than querying the server over the network, and allows us to run tests in a reasonable time. They also allow us to easily debug a customers problem; using a simple snapshot generation program, users can generate a query snapshot that could be sent along with a bug report that we can immediately replay on our machines to let us debug the issue, rather than having to obtain database backups and restore databases to test systems. There are also far fewer problems with data security; query snapshots only contain schema information, which is generally less sensitive than table data. Query snapshots implementation However, actually implementing such a feature did have a couple of 'gotchas' to it. My second blog post detailed the development of the dependencies algorithm we use to ensure we get all the dependencies in the database, and that algorithm uses data from both databases to find all the needed objects - what database you're comparing to affects what objects get populated from both databases. We get information on these additional objects using an appropriate WHERE clause on all the population queries. So, in order to accurately replay the results of querying the live database, the query snapshot needs to be a snapshot of a comparison of two databases, not just populating a single database. Furthermore, although the code population queries (eg querying all_tab_cols to get column information) can simply be passed straight from the IDataReader to the BinaryWriter, we need to hook into and run the live dependencies algorithm while we're creating the snapshot to ensure we get the same WHERE clauses, and the same query results, as if we were populating straight from a live system. We also need to store the results of the dependencies queries themselves, as the resulting dependency graph is stored within the OracleDatabase object that is produced, and is later used to help order actions in synchronization scripts. This is significantly helped by the dependencies algorithm being a deterministic algorithm - given the same input, it will always return the same output. Therefore, when we're replaying a query snapshot, and processing dependency information, we simply have to return the results of the queries in the order we got them from the live database, rather than trying to calculate the contents of all_dependencies on the fly. Query snapshots are a significant feature in Schema Compare that really helps us to debug problems with the tool, as well as making our testers happier. Although not really user-visible, they are very useful to the development team to help us fix bugs in the product much faster than we otherwise would be able to.

  Read the article

• My error with upgrading 4.0 to 4.2- What NOT to do...

  - by Steve Tunstall

  Last week, I was helping a client upgrade from the 2011.1.4.0 code to the newest 2011.1.4.2 code. We downloaded the 4.2 update from MOS, upload and unpacked it on both controllers, and upgraded one of the controllers in the cluster with no issues at all. As this was a brand-new system with no networking or pools made on it yet, there were not any resources to fail back and forth between the controllers. Each controller had it's own, private, management interface (igb0 and igb1) and that's it. So we took controller 1 as the passive controller and upgraded it first. The first controller came back up with no issues and was now on the 4.2 code. Great. We then did a takeover on controller 1, making it the active head (although there were no resources for it to take), and then proceeded to upgrade controller 2. Upon upgrading the second controller, we ran the health check with no issues. We then ran the update and it ran and rebooted normally. However, something strange then happened. It took longer than normal to come back up, and when it did, we got the "cluster controllers on different code" error message that one gets when the two controllers of a cluster are running different code. But we just upgraded the second controller to 4.2, so they should have been the same, right??? Going into the Maintenance-->System screen of controller 2, we saw something very strange. The "current version" was still on 4.0, and the 4.2 code was there but was in the "previous" state with the rollback icon, as if it was the OLDER code and not the newer code. I have never seen this happen before. I would have thought it was a bad 4.2 code file, but it worked just fine with controller 1, so I don't think that was it. Other than the fact the code did not update, there was nothing else going on with this system. It had no yellow lights, no errors in the Problems section, and no errors in any of the logs. It was just out of the box a few hours ago, and didn't even have a storage pool yet. So.... We deleted the 4.2 code, uploaded it from scratch, ran the health check, and ran the upgrade again. once again, it seemed to go great, rebooted, and came back up to the same issue, where it came to 4.0 instead of 4.2. See the picture below.... HERE IS WHERE I MADE A BIG MISTAKE.... I SHOULD have instantly called support and opened a Sev 2 ticket. They could have done a shared shell and gotten the correct Fishwork engineer to look at the files and the code and determine what file was messed up and fixed it. The system was up and working just fine, it was just on an older code version, not really a huge problem at all. Instead, I went ahead and clicked the "Rollback" icon, thinking that the system would rollback to the 4.2 code.   Ouch... What happened was that the system said, "Fine, I will delete the 4.0 code and boot to your 4.2 code"... Which was stupid on my part because something was wrong with the 4.2 code file here and the 4.0 was just fine.  So now the system could not boot at all, and the 4.0 code was completely missing from the system, and even a high-level Fishworks engineer could not help us. I had messed it up good. We could only get to the ILOM, and I had to re-image the system from scratch using a hard-to-get-and-use FishStick USB drive. These are tightly controlled and difficult to get, almost always handcuffed to an engineer who will drive out to re-image a system. This took another day of my client's time.  So.... If you see a "previous version" of your system code which is actually a version higher than the current version... DO NOT ROLL IT BACK.... It did not upgrade for a very good reason. In my case, after the system was re-imaged to a code level just 3 back, we once again tried the same 4.2 code update and it worked perfectly the first time and is now great and stable.  Lesson learned.  By the way, our buddy Ryan Matthews wanted to point out the best practice and supported way of performing an upgrade of an active/active ZFSSA, where both controllers are doing some of the work. These steps would not have helpped me for the above issue, but it's important to follow the correct proceedure when doing an upgrade. 1) Upload software to both controllers and wait for it to unpack 2) On controller "A" navigate to configuration/cluster and click "takeover" 3) Wait for controller "B" to finish restarting, then login to it, navigate to maintenance/system, and roll forward to the new software. 4) Wait for controller "B" to apply the update and finish rebooting 5) Login to controller "B", navigate to configuration/cluster and click "takeover" 6) Wait for controller "A" to finish restarting, then login to it, navigate to maintenance/system, and roll forward to the new software. 7) Wait for controller "A" to apply the update and finish rebooting 8) Login to controller "B", navigate to configuration/cluster and click "failback"

  Read the article

• How do I rotate my monitor using xorg?

  - by user1106405

  I have just installed KUbuntu 12.10, and I am attempting to rotate my monitor 90 deg to the left. When I add the option to rotate, the monitor seems to ignore the directive. I'm currently using dual 02:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1) 03:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1) and NVidia driver version 310 My xorg.conf is as follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 304.51 (buildd@komainu) Fri Oct 12 12:53:49 UTC 2012 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 310.14 ([email protected]) Tue Oct 9 13:04:01 PDT 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 1280 0 Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 60.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 1908WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 EndSection Section "Monitor" Identifier "Monitor2" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:2:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:2:0:0" Screen 1 EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1200 +0+0; DFP-0: 1920x1200_60 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1600x1200_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select @1920x1080 +0+0; DFP-0: nvidia-auto-select @1920x720 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1200 +0+0; DFP-0: 1920x1200_60 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1600x1200_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-2: nvidia-auto-select +0+0" Option "Rotate" "left" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Enable" EndSection Edit: If I delete the xorg.conf and reboot, I am able to rotate my monitor, however, my third monitor is not recognized: Screen 0: minimum 8 x 8, current 3360 x 1200, maximum 16384 x 16384 DVI-I-0 disconnected (normal left inverted right x axis y axis) DVI-I-1 disconnected (normal left inverted right x axis y axis) DVI-I-2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 60.0*+ 1600x1200 60.0 1280x1024 60.0 1280x960 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI-0 disconnected (normal left inverted right x axis y axis) DVI-I-3 connected 1440x900+1920+0 (normal left inverted right x axis y axis) 408mm x 255mm 1440x900 59.9*+ 75.0 1280x1024 75.0 60.0 1280x800 59.8 1152x864 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 56.2 640x480 75.0 72.8 59.9

  Read the article

• Oracle NoSQL Database Exceeds 1 Million Mixed YCSB Ops/Sec

  - by Charles Lamb

  We ran a set of YCSB performance tests on Oracle NoSQL Database using SSD cards and Intel Xeon E5-2690 CPUs with the goal of achieving 1M mixed ops/sec on a 95% read / 5% update workload. We used the standard YCSB parameters: 13 byte keys and 1KB data size (1,102 bytes after serialization). The maximum database size was 2 billion records, or approximately 2 TB of data. We sized the shards to ensure that this was not an "in-memory" test (i.e. the data portion of the B-Trees did not fit into memory). All updates were durable and used the "simple majority" replica ack policy, effectively 'committing to the network'. All read operations used the Consistency.NONE_REQUIRED parameter allowing reads to be performed on any replica. In the past we have achieved 100K ops/sec using SSD cards on a single shard cluster (replication factor 3) so for this test we used 10 shards on 15 Storage Nodes with each SN carrying 2 Rep Nodes and each RN assigned to its own SSD card. After correcting a scaling problem in YCSB, we blew past the 1M ops/sec mark with 8 shards and proceeded to hit 1.2M ops/sec with 10 shards.  Hardware Configuration We used 15 servers, each configured with two 335 GB SSD cards. We did not have homogeneous CPUs across all 15 servers available to us so 12 of the 15 were Xeon E5-2690, 2.9 GHz, 2 sockets, 32 threads, 193 GB RAM, and the other 3 were Xeon E5-2680, 2.7 GHz, 2 sockets, 32 threads, 193 GB RAM.  There might have been some upside in having all 15 machines configured with the faster CPU, but since CPU was not the limiting factor we don't believe the improvement would be significant. The client machines were Xeon X5670, 2.93 GHz, 2 sockets, 24 threads, 96 GB RAM. Although the clients had 96 GB of RAM, neither the NoSQL Database or YCSB clients require anywhere near that amount of memory and the test could have just easily been run with much less. Networking was all 10GigE. YCSB Scaling Problem We made three modifications to the YCSB benchmark. The first was to allow the test to accommodate more than 2 billion records (effectively int's vs long's). To keep the key size constant, we changed the code to use base 32 for the user ids. The second change involved to the way we run the YCSB client in order to make the test itself horizontally scalable.The basic problem has to do with the way the YCSB test creates its Zipfian distribution of keys which is intended to model "real" loads by generating clusters of key collisions. Unfortunately, the percentage of collisions on the most contentious keys remains the same even as the number of keys in the database increases. As we scale up the load, the number of collisions on those keys increases as well, eventually exceeding the capacity of the single server used for a given key.This is not a workload that is realistic or amenable to horizontal scaling. YCSB does provide alternate key distribution algorithms so this is not a shortcoming of YCSB in general. We decided that a better model would be for the key collisions to be limited to a given YCSB client process. That way, as additional YCSB client processes (i.e. additional load) are added, they each maintain the same number of collisions they encounter themselves, but do not increase the number of collisions on a single key in the entire store. We added client processes proportionally to the number of records in the database (and therefore the number of shards). This change to the use of YCSB better models a use case where new groups of users are likely to access either just their own entries, or entries within their own subgroups, rather than all users showing the same interest in a single global collection of keys. If an application finds every user having the same likelihood of wanting to modify a single global key, that application has no real hope of getting horizontal scaling. Finally, we used read/modify/write (also known as "Compare And Set") style updates during the mixed phase. This uses versioned operations to make sure that no updates are lost. This mode of operation provides better application behavior than the way we have typically run YCSB in the past, and is only practical at scale because we eliminated the shared key collision hotspots.It is also a more realistic testing scenario. To reiterate, all updates used a simple majority replica ack policy making them durable. Scalability Results In the table below, the "KVS Size" column is the number of records with the number of shards and the replication factor. Hence, the first row indicates 400m total records in the NoSQL Database (KV Store), 2 shards, and a replication factor of 3. The "Clients" column indicates the number of YCSB client processes. "Threads" is the number of threads per process with the total number of threads. Hence, 90 threads per YCSB process for a total of 360 threads. The client processes were distributed across 10 client machines. Shards KVS Size Clients Mixed (records) Threads OverallThroughput(ops/sec) Read Latencyav/95%/99%(ms) Write Latencyav/95%/99%(ms) 2 400m(2x3) 4 90(360) 302,152 0.76/1/3 3.08/8/35 4 800m(4x3) 8 90(720) 558,569 0.79/1/4 3.82/16/45 8 1600m(8x3) 16 90(1440) 1,028,868 0.85/2/5 4.29/21/51 10 2000m(10x3) 20 90(1800) 1,244,550 0.88/2/6 4.47/23/53

  Read the article

• Better way to load level content in XNA?

  - by user2002495

  Currently I loaded all my assets in XNA in the main Game class. What I want to achieve later is that I only load specific assets for specific levels (the game will consist of many levels). Here is how I load my main assets into the main class: protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); plane = new Player(Content.Load<Texture2D>(@"Player/playerSprite"), 6, 8); plane.animation = "down"; plane.pos = new Vector2(400, 500); plane.fps = 15; Global.currentPos = plane.pos; lvl1 = new Level1(Content.Load<Texture2D>(@"Levels/bgLvl1"), Content.Load<Texture2D>(@"Levels/bgLvl1-other"), new Vector2(0, 0), new Vector2(0, -600)); CommonBullet.LoadContent(Content); CommonEnemyBullet.LoadContent(Content); } protected override void UnloadContent() { } protected override void Update(GameTime gameTime) { if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) this.Exit(); plane.Update(gameTime); lvl1.Update(gameTime); foreach (CommonEnemy ce in cel) { if (ce.CollidesWith(plane)) { ce.hasSpawn = false; } foreach (CommonBullet b in plane.commonBulletList) { if (b.CollidesWith(ce)) { ce.hasSpawn = false; } } ce.Update(gameTime); } LoadCommonEnemy(); base.Update(gameTime); } private void LoadCommonEnemy() { int randY = rand.Next(-600, -10); int randX = rand.Next(0, 750); if (cel.Count < 3) { cel.Add(new CommonEnemy(Content.Load<Texture2D>(@"Enemy/Common/commonEnemySprite"), 7, 2, "left", randX, randY)); } for (int i = 0; i < cel.Count; i++) { if (!cel[i].hasSpawn) { cel.RemoveAt(i); i--; } } } protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.Black); spriteBatch.Begin(); lvl1.Draw(spriteBatch); plane.Draw(spriteBatch); foreach (CommonEnemy ce in cel) { ce.Draw(spriteBatch); } spriteBatch.End(); base.Draw(gameTime); } I wish to load my players, enemies, all in Level1 class. However, when I move my player & enemy code into the Level1 class, the gameTime returns null. Here is my Level1 class: using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Media; using Microsoft.Xna.Framework.Input; using SpaceShooter_Beta.Animation.PlayerCollection; using SpaceShooter_Beta.Animation.EnemyCollection.Common; namespace SpaceShooter_Beta.Levels { public class Level1 { public Texture2D bgTexture1, bgTexture2; public Vector2 bgPos1, bgPos2; public float speed = 5f; Player plane; public Level1(Texture2D texture1, Texture2D texture2, Vector2 pos1, Vector2 pos2) { this.bgTexture1 = texture1; this.bgTexture2 = texture2; this.bgPos1 = pos1; this.bgPos2 = pos2; } public void LoadContent(ContentManager cm) { plane = new Player(cm.Load<Texture2D>(@"Player/playerSprite"), 6, 8); plane.animation = "down"; plane.pos = new Vector2(400, 500); plane.fps = 15; Global.currentPos = plane.pos; } public void Draw(SpriteBatch sb) { sb.Draw(bgTexture1, bgPos1, Color.White); sb.Draw(bgTexture2, bgPos2, Color.White); plane.Draw(sb); } public void Update(GameTime gt) { bgPos1.Y += speed; bgPos2.Y += speed; if (bgPos1.Y >= 600) { bgPos1.Y = -600; } if (bgPos2.Y >= 600) { bgPos2.Y = -600; } plane.Update(gt); } } } Of course when I did this, I delete all my player's code in the main Game class. All of that works fine (no errors) except that the game cannot start. The debugger says that plane.Update(gt); in Level 1 class has null GameTime, same thing with the Draw method in the Level class. Please help, I appreciate for the time. [EDIT] I know that using switch in the main class can be a solution. But I prefer a cleaner solution than that, since using switch still means I need to load all the assets through the main class, the code will be A LOT later on for each levels

  Read the article

• How to get distinct values from the List&lt;T&gt; with LINQ

  - by Vincent Maverick Durano

  Recently I was working with data from a generic List<T> and one of my objectives is to get the distinct values that is found in the List. Consider that we have this simple class that holds the following properties: public class Product { public string Make { get; set; } public string Model { get; set; } }   Now in the page code behind we will create a list of product by doing the following: private List<Product> GetProducts() { List<Product> products = new List<Product>(); Product p = new Product(); p.Make = "Samsung"; p.Model = "Galaxy S 1"; products.Add(p); p = new Product(); p.Make = "Samsung"; p.Model = "Galaxy S 2"; products.Add(p); p = new Product(); p.Make = "Samsung"; p.Model = "Galaxy Note"; products.Add(p); p = new Product(); p.Make = "Apple"; p.Model = "iPhone 4"; products.Add(p); p = new Product(); p.Make = "Apple"; p.Model = "iPhone 4s"; products.Add(p); p = new Product(); p.Make = "HTC"; p.Model = "Sensation"; products.Add(p); p = new Product(); p.Make = "HTC"; p.Model = "Desire"; products.Add(p); p = new Product(); p.Make = "Nokia"; p.Model = "Some Model"; products.Add(p); p = new Product(); p.Make = "Nokia"; p.Model = "Some Model"; products.Add(p); p = new Product(); p.Make = "Sony Ericsson"; p.Model = "800i"; products.Add(p); p = new Product(); p.Make = "Sony Ericsson"; p.Model = "800i"; products.Add(p); return products; }   And then let’s bind the products to the GridView. protected void Page_Load(object sender, EventArgs e) { if (!IsPostBack) { Gridview1.DataSource = GetProducts(); Gridview1.DataBind(); } }   Running the code will display something like this in the page: Now what I want is to get the distinct row values from the list. So what I did is to use the LINQ Distinct operator and unfortunately it doesn't work. In order for it work is you must use the overload method of the Distinct operator for you to get the desired results. So I’ve added this IEqualityComparer<T> class to compare values: class ProductComparer : IEqualityComparer<Product> { public bool Equals(Product x, Product y) { if (Object.ReferenceEquals(x, y)) return true; if (Object.ReferenceEquals(x, null) || Object.ReferenceEquals(y, null)) return false; return x.Make == y.Make && x.Model == y.Model; } public int GetHashCode(Product product) { if (Object.ReferenceEquals(product, null)) return 0; int hashProductName = product.Make == null ? 0 : product.Make.GetHashCode(); int hashProductCode = product.Model.GetHashCode(); return hashProductName ^ hashProductCode; } }   After that you can then bind the GridView like this: protected void Page_Load(object sender, EventArgs e) { if (!IsPostBack) { Gridview1.DataSource = GetProducts().Distinct(new ProductComparer()); Gridview1.DataBind(); } }   Running the page will give you the desired output below: As you notice, it now eliminates the duplicate rows in the GridView. Now what if we only want to get the distinct values for a certain field. For example I want to get the distinct “Make” values such as Samsung, Apple, HTC, Nokia and Sony Ericsson and populate them to a DropDownList control for filtering purposes. I was hoping the the Distinct operator has an overload that can compare values based on the property value like (GetProducts().Distinct(o => o.PropertyToCompare). But unfortunately it doesn’t provide that overload so what I did as a workaround is to use the GroupBy,Select and First LINQ query operators to achieve what I want. Here’s the code to get the distinct values of a certain field. protected void Page_Load(object sender, EventArgs e) { if (!IsPostBack) { DropDownList1.DataSource = GetProducts().GroupBy(o => o.Make).Select(o => o.First()); DropDownList1.DataTextField = "Make"; DropDownList1.DataValueField = "Model"; DropDownList1.DataBind(); } } Running the code will display the following output below:   That’s it! I hope someone find this post useful!

  Read the article

• Collision Detection problems in Voxel Engine (XNA)

  - by Darestium

  I am creating a minecraft like terrain engine in XNA and have had some collision problems for quite some time. I have checked and changed my code based on other peoples collision code and I still have the same problem. It always seems to be off by about a block. for instance, if I walk across a bridge which is one block high I fall through it. Also, if you walk towards a "row" of blocks like this: You are able to stand "inside" the left most one, and you collide with nothing in the right most side (where there is no block and is not visible on this image). Here is all my collision code: private void Move(GameTime gameTime, Vector3 direction) { float speed = playermovespeed * (float)gameTime.ElapsedGameTime.TotalSeconds; Matrix rotationMatrix = Matrix.CreateRotationY(player.Camera.LeftRightRotation); Vector3 rotatedVector = Vector3.Transform(direction, rotationMatrix); rotatedVector.Normalize(); Vector3 testVector = rotatedVector; testVector.Normalize(); Vector3 movePosition = player.position + testVector * speed; Vector3 midBodyPoint = movePosition + new Vector3(0, -0.7f, 0); Vector3 headPosition = movePosition + new Vector3(0, 0.1f, 0); if (!world.GetBlock(movePosition).IsSolid && !world.GetBlock(midBodyPoint).IsSolid && !world.GetBlock(headPosition).IsSolid) { player.position += rotatedVector * speed; } //player.position += rotatedVector * speed; } ... public void UpdatePosition(GameTime gameTime) { player.velocity.Y += playergravity * (float)gameTime.ElapsedGameTime.TotalSeconds; Vector3 footPosition = player.Position + new Vector3(0f, -1.5f, 0f); Vector3 headPosition = player.Position + new Vector3(0f, 0.1f, 0f); // If the block below the player is solid the Y velocity should be zero if (world.GetBlock(footPosition).IsSolid || world.GetBlock(headPosition).IsSolid) { player.velocity.Y = 0; } UpdateJump(gameTime); UpdateCounter(gameTime); ProcessInput(gameTime); player.Position = player.Position + player.velocity * (float)gameTime.ElapsedGameTime.TotalSeconds; velocity = Vector3.Zero; } and the one and only function in the camera class: protected void CalculateView() { Matrix rotationMatrix = Matrix.CreateRotationX(upDownRotation) * Matrix.CreateRotationY(leftRightRotation); lookVector = Vector3.Transform(Vector3.Forward, rotationMatrix); cameraFinalTarget = Position + lookVector; Vector3 cameraRotatedUpVector = Vector3.Transform(Vector3.Up, rotationMatrix); viewMatrix = Matrix.CreateLookAt(Position, cameraFinalTarget, cameraRotatedUpVector); } which is called when the rotation variables are changed: public float LeftRightRotation { get { return leftRightRotation; } set { leftRightRotation = value; CalculateView(); } } public float UpDownRotation { get { return upDownRotation; } set { upDownRotation = value; CalculateView(); } } World class: public Block GetBlock(int x, int y, int z) { if (InBounds(x, y, z)) { Vector3i regionalPosition = GetRegionalPosition(x, y, z); Vector3i region = GetRegionPosition(x, y, z); return regions[region.X, region.Y, region.Z].Blocks[regionalPosition.X, regionalPosition.Y, regionalPosition.Z]; } return new Block(BlockType.none); } public Vector3i GetRegionPosition(int x, int y, int z) { int regionx = x == 0 ? 0 : x / Variables.REGION_SIZE_X; int regiony = y == 0 ? 0 : y / Variables.REGION_SIZE_Y; int regionz = z == 0 ? 0 : z / Variables.REGION_SIZE_Z; return new Vector3i(regionx, regiony, regionz); } public Vector3i GetRegionalPosition(int x, int y, int z) { int regionx = x == 0 ? 0 : x / Variables.REGION_SIZE_X; int X = x % Variables.REGION_SIZE_X; int regiony = y == 0 ? 0 : y / Variables.REGION_SIZE_Y; int Y = y % Variables.REGION_SIZE_Y; int regionz = z == 0 ? 0 : z / Variables.REGION_SIZE_Z; int Z = z % Variables.REGION_SIZE_Z; return new Vector3i(X, Y, Z); } Any ideas how to fix this problem? EDIT 1: Graphic of the problem: EDIT 2 GetBlock, Vector3 version: public Block GetBlock(Vector3 position) { int x = (int)Math.Floor(position.X); int y = (int)Math.Floor(position.Y); int z = (int)Math.Ceiling(position.Z); Block block = GetBlock(x, y, z); return block; } Now, the thing is I tested the theroy that the Z is always "off by one" and by ceiling the value it actually works as intended. Altough it still could be greatly more accurate (when you go down holes you can see through the sides, and I doubt it will work with negitive positions). I also does not feel clean Flooring the X and Y values and just Ceiling the Z. I am surely not doing something correctly still.

  Read the article

• Speakers, Please Check Your Time

  - by AjarnMark

  Woodrow Wilson was once asked how long it would take him to prepare for a 10 minute speech. He replied "Two weeks". He was then asked how long it would take for a 1 hour speech. "One week", he replied. 2 hour speech? "I'm ready right now," he replied.  Whether that is a true story or an urban legend, I don’t really know, but either way, it is a poignant reminder for all speakers, and particularly apropos this week leading up to the PASS Community Summit. (Cross-posted to the PASS Professional Development Virtual Chapter blog #PASSProfDev.) What’s the point of that story?  Simply this…if you have plenty of time to do your presentation, you don’t need to prepare much because it is easy to throw in more and more material to stretch out to your allotted time.  But if you are on a tight time constraint, then it will take significant preparation to distill your talk down to only the essential points. I have attended seven of the last eight North American Summit events, and every one of them has been fantastic.  The speakers are great, the material is timely and relevant, and the networking opportunities are awesome.  And every year, there is one little thing that just bugs me…speakers going over their allotted time.  Why does it bother me so?  Well, if you look at a typical schedule for a Summit, you’ll see that there are six or more sessions going on at the same time, and only 15 minutes to move from one to another.  If you’re trying to maximize your training dollar by attending something during every session time slot, and you don’t want to be the last guy trying to squeeze into the middle of the row, then those 15 minutes can be critical.  All the more so if you need to stop and use the bathroom or if you have to hike to the opposite end of the convention center.  It is really a bad position to find yourself having to choose between learning the last key points of Speaker A who is going over time, and getting over to Speaker B on time so you don’t miss her key opening remarks. And frankly, I think it is just rude.  Yes, the speakers are the function, after all they are bringing the content that the rest of us are paying to learn.  But it is also an honor to be given the opportunity to speak at a conference like this, and no one speaker is so important that the conference would be a disaster without him.  Speakers know when they submit their abstract, long before the conference, how much time they will have.  It has been the same pattern at the Summit for at least the last eight years.  Program Sessions are 75 minutes long.  Some speakers who have a good track record, and meet other qualifying criteria, are extended an invitation to present a Spotlight Session which is 90 minutes (a 20% increase).  So there really is no excuse.  It’s not like you were promised a 2-hour segment and then discovered when you got here that it was only 75 minutes.  In fact, it’s not like PASS advertised 90-minute sessions for everyone and then a select few were cut back to only 75.  As a speaker, you know well before you get here which type of session you are doing and how long it is, so as a professional, you should plan accordingly. Now you might think that this only happens to rookies, but I’ll tell you that some of the worst offenders are big-name veterans who draw huge attendance numbers for their sessions.  Some attendees blow this off as, “Hey, it’s so-and-so, and I’d stay here for hours and listen to him/her talk.”  To which I would reply, “Then they should have submitted for a pre- or post-conference day-long seminar instead, but don’t try to squeeze your day-long talk into a 90-minute session.”  Now I don’t really believe that these speakers are being malicious or just selfishly trying to extend their time in the spotlight.  I think that most of them are merely being undisciplined and did not trim their presentation sufficiently, or allowed themselves to get off-track (often in a generous attempt to help someone in the audience with a question or problem that really should have been noted for further discussion after the session). So here is my recommendation…my plea, even.  TRIM THE FAT!  Now.  Before it’s too late.  Before you even get on the airplane, take a long, hard look at your presentation and eliminate some of the points that you originally thought you had to make, but in reality are not truly crucial to your main topic.  Delete a few slides.  Test your demos and have them already scripted rather than typing them during your talk.  It is better to cut out too much and end up with plenty of time at the end for Questions & Answers.  And you can always keep some notes on the stuff that you cut out so that you could fill it back in at the end as bonus material if you really do end up with a whole bunch of time on your hands.  But I don’t think you will.  And if you do, that will look even better to the audience as it will look like you’re giving them something extra that not every audience gets.  And they will thank you for that.

  Read the article

• Extending Expression Blend 4 &amp; Blend for Visual Studio 2012

  - by Chris Skardon

  Just getting this off the bat, I presume this will also work for Blend 5, but I can’t confirm it… Anyhews, I imagine you’re here because you want to know how to create an addin for Blend, so let’s jump right in there! First, and foremost, we’re going to need to ensure our development environment has the right setup, so the checklist: Visual Studio 2012 Blend for Visual Studio 2012 OK, let’s create a new project (class library, .NET 4.5): Hello.Extension The ‘.Extension’ bit is very very important. The addin will not work unless it is named in this way. You can put whatever you want at the front, but it has to have the extension bit. OK, so now we have a solution with one project. To this project we need to add references to the following things: Microsoft.Expression.Extensibility (from c:\program files\Microsoft Visual Studio 11.0\Blend\   -- x86 folder if you are on an x64 windows install) Microsoft.Expression.Framework (same location as above) PresentationCore PresentationFramework WindowsBase System.ComponentModel.Composition Got them? ACE. Let’s now add a project to contain our control, so, create a new WPF Application project, cunningly named something like ‘Hello.Control’… (I’m creating a WPF application here, because I’m too lazy to dig up the correct references, and this will add all the ones I need ) Once that is created, delete the App.xaml and MainWindow.xaml files, we won’t be needing them. You will also need to change the properties of the project itself, so it is only a class library. Once that is done, let’s add a new UserControl, which will be this: <UserControl x:Class="Hello.Control.HelloControl" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="300"> <Grid> <TextBlock Text="HELLO!!!"/> </Grid> </UserControl> Impressive eh? Now, let’s reference the WPF project from the Extension library. All that’s left now is to code up our extension… So, add a class to the Extension project (name wise doesn’t matter), and make it implement the IPackage interface from the Microsoft.Expression.Extensibility library: public class HelloExtension : IPackage { /**/ } We’ll implement the two methods we need to: public class HelloExtension : IPackage { public void Load(IServices services) { } public void Unload() { } } We’re only really concerned about the Load method in this case, as let’s face it, the extension we have doesn’t need to do a lot to bog off. The interesting thing about the Load method is that it receives an IServices instance. This allows us to get access to all the services that Expression provides, in this case we’re interested in one in particular, the ‘IWindowService’ So, let’s get that bad boy… private IWindowService _windowService; public void Load(IServices services) { _windowService = services.GetService<IWindowService>(); } Nailed it… But why? The WindowService allows us to register our UserControl with Blend, which in turn allows people to activate and see it, which is a big plus point. So, let’s do that… We’ll create an ‘Initialize’ method to create our new control, and add it to the WindowService: private HelloControl _helloControl; public void Initialize() { _helloControl = new HelloControl(); if (_windowService.PaletteRegistry["HelloPanel"] == null) _windowService.RegisterPalette("HelloPanel", _helloControl, "Hello Window"); } First we check that we’re not already registered, and if we’re not we register, the first argument is the identifier used by the service to, well, identify your extension. The second argument is the actual control, the third argument is the name that people will see in the ‘Windows’ menu of Blend itself (so important note here – don’t put anything embarrassing or (need I say it?) sweary…) There are only two things to do now - Call ‘Initialize()’ from our Load method, and Export the class This is easy money – add [Export(typeof(IPackage))] to the top of our class… The full code will (should) look like this: [Export(typeof (IPackage))] public class HelloExtension : IPackage { private HelloControl _helloControl; private IWindowService _windowService; public void Load(IServices services) { _windowService = services.GetService<IWindowService>(); Initialize(); } public void Unload() { } public void Initialize() { _helloControl = new HelloControl(); if (_windowService.PaletteRegistry["HelloControl"] == null) _windowService.RegisterPalette("HelloControl", _helloControl, "Hello Window"); } } If you build this and copy it to your ‘Extensions’ folder in Blend (c:\program files\microsoft visual studio 11.0\blend\) and start Blend, you should see ‘Hello Window’ listed in the Window menu: That as they say is it!

  Read the article

• Building a Repository Pattern against an EF 5 EDMX Model - Part 1

  - by Juan

  I am part of a year long plus project that is re-writing an existing application for a client.  We have decided to develop the project using Visual Studio 2012 and .NET 4.5.  The project will be using a number of technologies and patterns to include Entity Framework 5, WCF Services, and WPF for the client UI.This is my attempt at documenting some of the successes and failures that I will be coming across in the development of the application.In building the data access layer we have to access a database that has already been designed by a dedicated dba. The dba insists on using Stored Procedures which has made the use of EF a little more difficult.  He will not allow direct table access but we did manage to get him to allow us to use Views.  Since EF 5 does not have good support to do Code First with Stored Procedures, my option was to create a model (EDMX) against the existing database views.   I then had to go select each entity and map the Insert/Update/Delete functions to their respective stored procedure. The next step after I had completed mapping the stored procedures to the entities in the EDMX model was to figure out how to build a generic repository that would work well with Entity Framework 5.  After reading the blog posts below, I adopted much of their code with some changes to allow for the use of Ninject for dependency injection.http://www.tcscblog.com/2012/06/22/entity-framework-generic-repository/ http://www.tugberkugurlu.com/archive/generic-repository-pattern-entity-framework-asp-net-mvc-and-unit-testing-triangle IRepository.cs public interface IRepository : IDisposable where T : class { void Add(T entity); void Update(T entity, int id); T GetById(object key); IQueryable Query(Expression> predicate); IQueryable GetAll(); int SaveChanges(); int SaveChanges(bool validateEntities); } GenericRepository.cs public abstract class GenericRepository : IRepository where T : class { public abstract void Add(T entity); public abstract void Update(T entity, int id); public abstract T GetById(object key); public abstract IQueryable Query(Expression> predicate); public abstract IQueryable GetAll(); public int SaveChanges() { return SaveChanges(true); } public abstract int SaveChanges(bool validateEntities); public abstract void Dispose(); } One of the issues I ran into was trying to do an update. I kept receiving errors so I posted a question on Stack Overflow http://stackoverflow.com/questions/12585664/an-object-with-the-same-key-already-exists-in-the-objectstatemanager-the-object and came up with the following hack. If someone has a better way, please let me know. DbContextRepository.cs public class DbContextRepository : GenericRepository where T : class { protected DbContext Context; protected DbSet DbSet; public DbContextRepository(DbContext context) { if (context == null) throw new ArgumentException("context"); Context = context; DbSet = Context.Set(); } public override void Add(T entity) { if (entity == null) throw new ArgumentException("Cannot add a null entity."); DbSet.Add(entity); } public override void Update(T entity, int id) { if (entity == null) throw new ArgumentException("Cannot update a null entity."); var entry = Context.Entry(entity); if (entry.State == EntityState.Detached) { var attachedEntity = DbSet.Find(id); // Need to have access to key if (attachedEntity != null) { var attachedEntry = Context.Entry(attachedEntity); attachedEntry.CurrentValues.SetValues(entity); } else { entry.State = EntityState.Modified; // This should attach entity } } } public override T GetById(object key) { return DbSet.Find(key); } public override IQueryable Query(Expression> predicate) { return DbSet.Where(predicate); } public override IQueryable GetAll() { return Context.Set(); } public override int SaveChanges(bool validateEntities) { Context.Configuration.ValidateOnSaveEnabled = validateEntities; return Context.SaveChanges(); } #region IDisposable implementation public override void Dispose() { if (Context != null) { Context.Dispose(); GC.SuppressFinalize(this); } } #endregion IDisposable implementation } At this point I am able to start creating individual repositories that are needed and add a Unit of Work.  Stay tuned for the next installment in my path to creating a Repository Pattern against EF5.

  Read the article

• The design of a generic data synchronizer, or, an [object] that does [actions] with the aid of [helpers]

  - by acheong87

  I'd like to create a generic data-source "synchronizer," where data-source "types" may include MySQL databases, Google Spreadsheets documents, CSV files, among others. I've been trying to figure out how to structure this in terms of classes and interfaces, keeping in mind (what I've read about) composition vs. inheritance and is-a vs. has-a, but each route I go down seems to violate some principle. For simplicity, assume that all data-sources have a header-row-plus-data-rows format. For example, assume that the first rows of Google Spreadsheets documents and CSV files will have column headers, a.k.a. "fields" (to parallel database fields). Also, eventually, I would like to implement this in PHP, but avoiding language-specific discussion would probably be more productive. Here's an overview of what I've tried. Part 1/4: ISyncable class CMySQL implements ISyncable GetFields() // sql query, pdo statement, whatever AddFields() RemFields() ... _dbh class CGoogleSpreadsheets implements ISyncable GetFields() // zend gdata api AddFields() RemFields() ... _spreadsheetKey _worksheetId class CCsvFile implements ISyncable GetFields() // read from buffer AddFields() RemFields() ... _buffer interface ISyncable GetFields() AddFields($field1, $field2, ...) RemFields($field1, $field2, ...) ... CanAddFields() // maybe the spreadsheet is locked for write, or CanRemFields() // maybe no permission to alter a database table ... AddRow() ModRow() RemRow() ... Open() Close() ... First Question: Does it make sense to use an interface, as above? Part 2/4: CSyncer Next, the thing that does the syncing. class CSyncer __construct(ISyncable $A, ISyncable $B) Push() // sync A to B Pull() // sync B to A Sync() // Push() and Pull() only differ in direction; factor. // Sync()'s job is to make sure that the fields on each side // match, to add fields where appropriate and possible, to // account for different column-orderings, etc., and of // course, to add and remove rows as necessary to sync. ... _A _B Second Question: Does it make sense to define such a class, or am I treading dangerously close to the "Kingdom of Nouns"? Part 3/4: CTranslator? ITranslator? Now, here's where I actually get lost, assuming the above is passable. Sometimes, two ISyncables speak different "dialects." For example, believe it or not, Google Spreadsheets (accessed through the Google Data API "list feed") returns column headers lower-cased and stripped of all spaces and symbols! That is, sys_TIMESTAMP is systimestamp, as far as my code can tell. (Yes, I am aware that the "cell feed" does not strip the name so; however cell-by-cell manipulation is too slow for what I'm doing.) One can imagine other hypothetical examples. Perhaps even the data itself can be in different "dialects." But let's take it as given for now, and not argue this if possible. Third Question: How would you implement "translation"? Note: Taking all this as an exercise, I'm more interested in the "idealized" design, rather than the practical one. (God knows that shipped sailed when I began this project.) Part 4/4: Further Thought Here's my train of thought to demonstrate I've thunk, albeit unfruitfully: First, I thought, primitively, "I'll just modify CMySQL::GetFields() to lower-case and strip field names so they're compatible with Google Spreadsheets." But of course, then my class should really be called, CMySQLForGoogleSpreadsheets, and that can't be right. So, the thing which translates must exist outside of an ISyncable implementor. And surely it can't be right to make each translation a method in CSyncer. If it exists outside of both ISyncable and CSyncer, then what is it? (Is it even an "it"?) Is it an abstract class, i.e. abstract CTranslator? Is it an interface, since a translator only does, not has, i.e. interface ITranslator? Does it even require instantiation? e.g. If it's an ITranslator, then should its translation methods be static? (I learned what "late static binding" meant, today.) And, dear God, whatever it is, how should a CSyncer use it? Does it "have" it? Is it, "it"? Who am I? ...am I, "I"? I've attempted to break up the question into sub-questions, but essentially my question is singular: How does one implement an object A that conceptually "links" (has) two objects b1 and b2 that share a common interface B, where certain pairs of b1 and b2 require a helper, e.g. a translator, to be handled by A? Something tells me that I've overcomplicated this design, or violated a principle much higher up. Thank you all very much for your time and any advice you can provide.

  Read the article

• Adventures in Windows 8: Solving activation errors

  - by Laurent Bugnion

  Note: I tagged this article with “MVVM” because I got a few support requests for MVVM Light regarding this exact issue. In fact it is a Windows 8 issue and has nothing to do with MVVM Light per se… Sometimes when you work on a Windows 8 app, you will get a very annoying issue when starting the app. In that case, the app doesn’t not even start past the Splash screen. Putting a breakpoint in App.xaml.cs doesn’t help because the app doesn’t even reach that point! So what exactly is happening? Well when a Windows 8 app starts, the system is performing a few check first. One of the checks, for instance, is to see if an app with the same package ID is already available. The package ID is a unique value set in the package manifest. In the Solution Explorer, double click on Package.appxmanifest. This opens the manifest in a special editor Click on the Packaging tab See the GUID under Package Name. This is the unique ID I am talking about. If there is a conflict (i.e. if an app is already installed with the exact same ID), Windows will warm the user that the app is already installed. However when you are in the process of developing an app, you install and uninstall the same app many many times (every time that you start in Visual Studio), and sometimes some issues arise, for instance failing to uninstall the app before starting the new instance of the same app. First step if you get such an error When the application fails to start past the splash screen, the first step is to identify what kind of error happened. In my experience the “already installed” is by far the most frequent (in fact I never had another such error), but it can be something else. An annoying thing is that the popup that shows the error is usually started below the Windows 8 app, and so you don’t even see it! This is especially true if you run this in the Simulator. In that case, do the following: Press on the Simulator’s home button, then press on the Desktop tile on the Start menu. The error popup should be shown on the desktop. If your applications runs on the Local machine, you also do the same and press the Windows button, and then from the Start menu press the Desktop tile. Deployment error in Studio Sometimes the same error causes Visual Studio to fail launching the application at all with a deployment error. This is a better case, because at least it is clear that there is an issue. In that case, write down the code that is shown in the Error window (for instance 0x80073D05 in the example below). Once you have the error code, go to the “Troubleshooting packaging, deployment, and query of Windows Store apps” page and look up the code in question. In my case, the error was “ERROR_DELETING_EXISTING_APPLICATIONDATA_STORE_FAILED”, “An error occurred while deleting the package's previously existing application data.” Solving the “ERROR_DELETING_EXISTING_APPLICATIONDATA_STORE_FAILED” issue Update: Before trying the below, you can also try the simple steps: Exit Visual Studio Go to the Start menu Locate your app’s tile. It should be visible in the Start menu directly, towards the far end on the right. Right click the tile and select Uninstall from the App Bar. Restart Visual Studio and try again. Sometimes it helps. If it doesn’t, then try the following: In order to solve the case where Windows, for any reason, fails to delete the existing application before starting the new instance, follow the steps: Open the Package.appxmanifest in Visual Studio Open the Packaging tab. Change the Package name. For tests you can just try to change the last character of the GUID, though I would recommend creating a brand new GUID. Press Start Type GUID Start the GUID Generator application Select Registry Format Press Copy. Paste the new GUID in place of the Package Name in Visual Studio Important: don’t forget to remove the curly brackets at the beginning and at the end of the newly pasted GUID. Then you just have to cross your fingers and start the application again… If it works, celebrate. if it doesn’t work… well at this point I am not sure so good luck with that ;) Happy coding, Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• What Counts for A DBA: Observant

  - by drsql

  When walking up to the building where I work, I can see CCTV cameras placed here and there for monitoring access to the building. We are required to wear authorization badges which could be checked at any time. Do we have enemies?  Of course! No one is 100% safe; even if your life is a fairy tale, there is always a witch with an apple waiting to snack you into a thousand years of slumber (or at least so I recollect from elementary school.) Even Little Bo Peep had to keep a wary lookout.    We nerdy types (or maybe it was just me?) generally learned on the school playground to keep an eye open for unprovoked attack from simpler, but more muscular souls, and take steps to avoid messy confrontations well in advance. After we’d apprehensively negotiated adulthood with varying degrees of success, these skills of watching for danger, and avoiding it,  translated quite well to the technical careers so many of us were destined for. And nowhere else is this talent for watching out for irrational malevolence so appropriate as in a career as a production DBA.   It isn’t always active malevolence that the DBA needs to watch out for, but the even scarier quirks of common humanity.  A large number of the issues that occur in the enterprise happen just randomly or even just one time ever in a spurious manner, like in the case where a person decided to download the entire MSDN library of software, cross join every non-indexed billion row table together, and simultaneously stream the HD feed of 5 different sporting events, making the network access slow while the corporate online sales just started. The decent DBA team, like the going, gets tough under such circumstances. They spring into action, checking all of the sources of active information, observes the issue is no longer happening now, figures that either it wasn’t the database’s fault and that the reboot of the whatever device on the network fixed the problem.  This sort of reactive support is good, and will be the initial reaction of even excellent DBAs, but it is not the end of the story if you really want to know what happened and avoid getting called again when it isn’t even your fault.   When fires start raging within the corporate software forest, the DBA’s instinct is to actively find a way to douse the flames and get back to having no one in the company have any idea who they are.  Even better for them is to find a way of killing a potential problem while the fires are small, long before they can be classified as raging. The observant DBA will have already been monitoring the server environment for months in advance.  Most troubles, such as disk space and security intrusions, can be predicted and dealt with by alerting systems, whereas other trouble can come out of the blue and requires a skill of observing ongoing conditions and noticing inexplicable changes that could signal an emerging problem.  You can’t automate the DBA, because the bankable skill of a DBA is in detecting the early signs of unexpected problems, and working out how to deal with them before anyone else notices them.    To achieve this, the DBA will check the situation as it is currently happening,  and in many cases is likely to have been the person who submitted the problem to the level 1 support person in the first place, just to let the support team know of impending issues (always well received, I tell you what!). Database and host computer settings, configurations, and even critical data might be profiled and captured for later comparisons. He’ll use Monitoring tools, built-in, commercial (Not to be too crassly commercial or anything, but there is one such tool is SQL Monitor) and lots of homebrew monitoring tools to monitor for problems and changes in the server environment.   You will know that you have it right when a support call comes in and you can look at your monitoring tools and quickly respond that “response time is well within the normal range, the query that supports the failing interface works perfectly and has actually only been called 67% as often as normal, so I am more than willing to help diagnose the problem, but it isn’t the database server’s fault and is probably a client or networking slowdown causing the interface to be used less frequently than normal.” And that is the best thing for any DBA to observe…

  Read the article

• Data Source Security Part 2

  - by Steve Felts

  In Part 1, I introduced the default security behavior and listed the various options available to change that behavior.  One of the key topics to understand is the difference between directly using database user and password values versus mapping from WLS user and password to the associated database values.   The direct use of database credentials is relatively new to WLS, based on customer feedback.  Some of the trade-offs are covered in this article. Credential Mapping vs. Database Credentials Each WLS data source has a credential map that is a mechanism used to map a key, in this case a WLS user, to security credentials (user and password).  By default, when a user and password are specified when getting a connection, they are treated as credentials for a WLS user, validated, and are converted to a database user and password using a credential map associated with the data source.  If a matching entry is not found in the credential map for the data source, then the user and password associated with the data source definition are used.  Because of this defaulting mechanism, you should be careful what permissions are granted to the default user.  Alternatively, you can define an invalid default user to ensure that no one can accidentally get through (in this case, you would need to set the initial capacity for the pool to zero so that the pool is populated only by valid users). To create an entry in the credential map: 1) First create a WLS user.  In the administration console, go to Security realms, select your realm (e.g., myrealm), select Users, and select New.  2) Second, create the mapping.  In the administration console, go to Services, select Data sources, select your data source name, select Security, select Credentials, and select New.  See http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/jdbc/jdbc_datasources/ConfigureCredentialMappingForADataSource.html for more information. The advantages of using the credential mapping are that: 1) You don’t hard-code the database user/password into a program or need to prompt for it in addition to the WLS user/password and 2) It provides a layer of abstraction between WLS security and database settings such that many WLS identities can be mapped to a smaller set of DB identities, thereby only requiring middle-tier configuration updates when WLS users are added/removed. You can cut down the number of users that have access to a data source to reduce the user maintenance overhead.  For example, suppose that a servlet has the one pre-defined, special WLS user/password for data source access, hard-wired in its code in a getConnection(user, password) call.  Every WebLogic user can reap the specific DBMS access coded into the servlet, but none has to have general access to the data source.  For instance, there may be a ‘Sales’ DBMS which needs to be protected from unauthorized eyes, but it contains some day-to-day data that everyone needs. The Sales data source is configured with restricted access and a servlet is built that hard-wires the specific data source access credentials in its connection request.  It uses that connection to deliver only the generally needed day-to-day information to any caller. The servlet cannot reveal any other data, and no WebLogic user can get any other access to the data source.  This is the approach that many large applications take and is the reasoning behind the default mapping behavior in WLS. The disadvantages of using the credential map are that: 1) It is difficult to manage (create, update, delete) with a large number of users; it is possible to use WLST scripts or a custom JMX client utility to manage credential map entries. 2) You can’t share a credential map between data sources so they must be duplicated. Some applications prefer not to use the credential map.  Instead, the credentials passed to getConnection(user, password) should be treated as database credentials and used to authenticate with the database for the connection, avoiding going through the credential map.  This is enabled by setting the “use-database-credentials” to true.  See http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/jdbc/jdbc_datasources/ConfigureOracleParameters.html "Configure Oracle parameters" in Oracle WebLogic Server Administration Console Help. Use Database Credentials is not currently supported for Multi Data Source configurations.  When enabled, it turns off credential mapping on Generic and Active GridLink data sources for the following attributes: 1. identity-based-connection-pooling-enabled (this interaction is available by patch in 10.3.6.0). 2. oracle-proxy-session (this interaction is first available in 10.3.6.0). 3. set client identifier (this interaction is available by patch in 10.3.6.0).  Note that in the data source schema, the set client identifier feature is poorly named “credential-mapping-enabled”.  The documentation and the console refer to it as Set Client Identifier. To review the behavior of credential mapping and using database credentials: - If using the credential map, there needs to be a mapping for each WLS user to database user for those users that will have access to the database; otherwise the default user for the data source will be used.  If you always specify a user/password when getting a connection, you only need credential map entries for those specific users. - If using database credentials without specifying a user/password, the default user and password in the data source descriptor are always used.  If you specify a user/password when getting a connection, that user will be used for the credentials.  WLS users are not involved at all in the data source connection process.

  Read the article

< Previous Page | 656 657 658 659 660 661 662 663 664 665 666 667  | Next Page >