Search Results

Search found 19446 results on 778 pages for 'network printer'.

Page 664/778 | < Previous Page | 660 661 662 663 664 665 666 667 668 669 670 671  | Next Page >

• Benchmarking a file server

  - by Joel Coel

  I'm working on building a new file server... a simple Windows Server box with a few terabytes of disk space to share on the LAN. Pain for current hard drive prices aside :( -- I would like to get some benchmarks for this device under load compared to our old server. The old server was installed in 2005 and had 5 136GB 10K disks in RAID 5. The new server has 8 1TB disks in two RAID 10 volumes (plus a hot spare for each volume), but they're only 7.2K rpm, and of course with a much larger cache size. I'd like to get an idea of the performance expectations of the new server relative to the old. Where do I get started? I'd like to know both raw potential under different kinds of load for each server, as well an idea of what our real-world load looks like and how it will translate. Will disk load even matter, or will performance be more driven by the network connection? I could probably fumble through some disk i/o and wait counters in performance monitor, but I don't really know what to look for, which counters to watch, or for how long and when. FWIW, I'm expecting a nice improvement because of the benefits of having two different volumes and the better RAID 10 performance vs RAID 5, in spite of using slower disks... but I'd like to get an idea of how much.

  Read the article

• gzip specific files

  - by byTheDrop

  for some reason these files are not gzipping on my apache server, chrome network tab shows this. Is there a specific directive I can add to htaccess to cache these files? Compressing the following resources with gzip could reduce their transfer size by about two thirds (~680.45KB): adae8bc4c3cb52cbe22358aaced87a72.css could save ~607B css_f91fa8d73b5e7661d6dcf9e58395e533.css could save ~59.54KB jquery.min.js could save ~37.27KB drupal.js could save ~6.15KB auto_image_handling.js could save ~6.72KB lightbox.js could save ~29.38KB superfish.js could save ~2.42KB jquery.bgiframe.min.js could save ~1011B jquery.hoverIntent.minified.js could save ~1.05KB nice_menus.js could save ~581B panels.js could save ~531B jquery.pngFix.js could save ~2.98KB jquery.cycle.all.min.js could save ~20.20KB views_slideshow.js could save ~8.76KB views_slideshow.js could save ~9.02KB wanderlust_custom_videos.js could save ~598B wl_helper.js could save ~777B extlink.js could save ~2.88KB cufon-yui.js could save ~11.89KB googleanalytics.js could save ~1.48KB swfobject.js could save ~6.65KB jquery.jcarousel.min.js could save ~10.19KB jcarousel.js could save ~6.01KB Akzidenz_Grotesk_BE_Super_800.font.js could save ~14.27KB Akzidenz_Grotesk_BE_Bold_700.font.js could save ~12.96KB Akzidenz_Grotesk_BE_Cn_400.font.js could save ~13.39KB SuperCondensed_500.font.js could save ~24.40KB FuturaBold_700.font.js could save ~26.19KB Futura_500.font.js could save ~57.70KB SuperGroteskB_500.font.js could save ~23.86KB jquery.cookie.js could save ~1.25KB wanderlust.js could save ~1.69KB sliderbottom.js could save ~442B jcarousellite_1.0.1.min.js could save ~4.60KB jcarousellite_control.js could save ~224B sitesdropdown.js could save ~1.09KB widgets.js could save ~50.13KB cufon-drupal.js could save ~599B swfobject_api.js could save ~348B ga.js could save ~24.02KB all.js could save ~124.67KB tweet_button.1347008535.html could save ~38.43KB xd_arbiter.php could save ~16.80KB xd_arbiter.php could save ~16.80KB

  Read the article

• IBM HS23 Blade Server (7875) onboard NIC driver for linux

  - by Igor Spivak

  I work with IBM HS23 Blade Server (7875). It's onboard NIC adapter is: Emulex OCl11104-F-X Virtual Fabric Adapter 2-port 10GB and 2-port 1GB LOM . I'm tryed to the following Linux OS with the server: 2.6.32-22-generic-pae #36-Ubuntu SMP. and discovered my OS has not proper Network drive installed (for the NIC adapter described above). After investigation I made, I discovered that the driver I need is "be2net" placed in "net" directory of the linux under the folder "be2net". I managed to download this driver with the latest package for my kernel. Driver info ("modinfo be2net" result) is as follows: --------------------------------------------------------------------------------------- filename: /lib/modules/2.6.32-22-generic-pae/kernel/drivers/net/benet/be2net.ko license: GPL author: ServerEngines Corporation description: ServerEngines BladeEngine2 10Gbps NICDriver 2.101.205 version: 2.101.205 srcversion: 199ADD251CB874C3727CC47 alias: pci:v000019A2d00000710sv*sd*bc*sc*i* alias: pci:v000019A2d00000701sv*sd*bc*sc*i* alias: pci:v000019A2d00000700sv*sd*bc*sc*i* alias: pci:v000019A2d00000221sv*sd*bc*sc*i* alias: pci:v000019A2d00000211sv*sd*bc*sc*i* depends: vermagic: 2.6.32-22-generic-pae SMP mod_unload modversions 586TSC parm: rx_frag_size:Size of a fragment that holds rcvd data. (uint) --------------------------------------------------------------------------------------- After starting linux, I get the following error: be2net 0000:16:00.x: Emulex OneConnect 10Gbps NIC (be3) initilization failed. I checked the same server with another Linux version (Red-Had 5.5.1.0) and the NICs worked properly, so seems there is no problem in HW. Also, on IBM or Emulex offical sites I managed to find drivers only for Red-Had and SUSE versions.

  Read the article

• SuperMicro BMC on OpenSuSE Linux --cannot access from LAN

  - by Kendall

  Hi, I have an (old) SMC-001 IPMI device on an (old) X6DVL-EG2 motherboard. My problem is that I cannot access the BMC from LAN. I'm also getting some interesting output from ipmitool. First, the setup. I enable Console Redirection in the BIOS, turn BIOS Redirection after POSt to "disabled". I then modprobe'ed for ipmi_msghandler, ipmi_devintf and ipmi_si. I then found ipmi0 under /dev. So far so good. Since I want console redirection over serial, I modified /boot/grub/menu.lst: http://pastebin.com/YYJmhusQ I then modified "/etc/inittab" as follows: S1:12345:respawn:/sbin/agetty -L 19200 ttyS1 ansi Networking I set as following, using "ipmitool" ipaddr: 192.168.3.164 netmask: 255.255.255.0 defgw: 192.168.3.1 The above are correct for my environment. To test it I do: ipmitool -I open chassis power off which responds by powering off the machine. When I to access from another computer on the network, however, I get an error message: host# ipmitool -I lanplus -H 192.168.10.164 -U Admin -a chassis power status Error: Unable to establish LAN session Unable to get Chassis Power Status "Admin" seems to be a valid user name: host# ipmitool -I open user list 1 2 Admin true false true USER The interesting output from ipmitool I initially mentioned: host # ipmitool -I open lan set 1 access on Set Channel Access for channel 1 failed: Request data field length limit exceeded Also, newload4:/home/gjones # ipmitool channel info 1 Channel 0x1 info: Channel Medium Type : 802.3 LAN Channel Protocol Type : IPMB-1.0 Session Support : session-less Active Session Count : 0 Protocol Vendor ID : 7154 Get Channel Access (volatile) failed: Request data field length limit exceeded The output of "ipmitool -I open lan print 1" is here: http://pastebin.com/UZyL6yyE Any help/suggestions is greatly appreciated; I've been working with this thing for a few hours now with no success.

  Read the article

• File transfer problems through VPN when Cisco IPS is enabled

  - by Richard West

  We have a Cisco ASA 5510 firewall with the IPS module installed. We have a customer that we must connect to via VPN to their network to exchange files via FTP. We use the Cisco VPN client (version 5.0.01.0600) on our local workstations, which are behind the firewall and subject to the IPS. The VPN client is successful in connecting to the remote site. However when we start the FTP file transfer we are able to upload only 150K to 200K of data, then everything stops. A minute later the VPN session is dropped. I think I have isolated this to an IPS issue by temporarily disabling the Service Policy on the ASA for the IPS with the following command: access-list IPS line 1 extended permit ip 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 inactive After this command was issued I then established the VPN to the remote site and was successful in transferring the entire file. While still connected to the VPN and FTP session I issued the command to enable the IPS: access-list IPS line 1 extended permit ip 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 The file transfer was tried again and was once again successful so I closed the FTP session and reopened it, while keeping the same VPN session open. This file transfer was also successful. This told me that nothing with the FTP programs was being filtered or causing the problem. Furthermore, we use FTP to exchange files with many sites everyday without issue. I then disconnected the original VPN session, which was established when the access-list was inactive, and reconnected the VPN session, now with the access-list active. After starting the FTP transfer the file stopped after 150K. To me this seems like the IPS is blocking, or somehow interfering with the initial VPN setup to the remote site. This only started happening last week after the latest IPS signature updates were applied (sig version 407.0). Our previous sig version was 95 days old becuase the system was not auto updating itself. Any ideas on what could be causing this problem?

  Read the article

• Wire VMWare Player NIC to a VLAN in Ubuntu 8.04.3

  - by Sophie Charlesworth

  I've got VMWare Player 2.5.x installed on a Ubuntu 8.04.3 host running CentOS 5.3 running Cobbler. VMWare Player has two NICs (I actually took this image from an ESXi image, converted it to Player 2.x image via VMWare Standalone Converter). I've also setup a vlan (vlan5) on the host with 10.0.0.x and I'd like Cobbler to use that VLAN to serve any incoming requests. How do I wire up my VMWare to use the VLAN I've setup? Just one of the NICs. What I'm trying to do is to offer a laptop with a VM that our sysadmins can go, plug it into a box (which does not connect to the interwebs) and install RHEL images via cobbler. So essentially, its a cross over cable from the network port on the lappy to the Dell server box. PXE boot in the dell box and install RHEL. I have the cobbler working fine under VMWare ESXi but not so on the VMWare Player because of the VLAN issue - I think. Any ideas?

  Read the article

• PXE with WDS & Windows Server 2012 - no filename option in DHCP lease?

  - by user1799

  I'm trying to configure Windows Server 2012 (a virtual box VM) with WDS so I can PXE boot some Windows 7 VMs (also virtual box). All the machines involved are only attached to the "host only network", 192.168.56.0/24. The Server 2012 machine has been setup as an AD DS machine, has DNS installed and working along with DHCP with option 60 - PXEClient - set and WDS is set to not listen on DHCP ports. I've followed http://technet.microsoft.com/en-us/library/jj648426.aspx very closely. I've used the boot.wim and install.wim files from the Win 7 installation DVD and they're configured as 'boot' and 'installation' images respectively. When I boot the target machine, it gets an IP address, but I simply get 'no filename' and the boot won't proceed any further. I've tried setting option 66 to 192.168.56.2 (the WDS server) and option 67 to both Boot\x64\wdsnbp.com and Boot\x64\pxeboot.n12 but all to no avail. I can't seem to see anything in the event log, either. Can anyone out there spot what I'm doing wrong? Or give tips to narrow down a diagnostic?

  Read the article

• Installing messaging software displays error 1324 invalid character

  - by llykke

  Trying to install Reuters Messaging software onto a windows 7 pc we receive the error message Error 1324: The folder path 'My Documents' contains an invalid character We've tried installing the application using the local admin account and the user account which is an AD account (roaming?). This user account has administrative rights (i.e. should be allowed to install applications). The users 'My Documents' folder is located on a network drive, where only the user has access. We've tried experimenting with the HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Explorer\ User Shell Folders registry entries and setting them to a local position (i.e. C:\Users\Username\Documents) but this didn't resolve the error. We've also tried the following which was taken from a website I can't remember the name of: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem Select the NtfsDisable8dot3NameCreation entry and change the value to 0 Select the Win31FileSystem entry and change the value to 0 which didn't resolve the issue. Edit: This was also an issue when attempting to install the citrix native client necessary to run citrix application (*.ica extension). This made the same error box appear.

  Read the article

• Wire VMWare Player NIC to a VLAN in Ubuntu 8.04.3

  - by Sophie Charlesworth

  Hi, I've got VMWare Player 2.5.x installed on a Ubuntu 8.04.3 host running CentOS 5.3 running Cobbler. VMWare Player has two NICs (I actually took this image from an ESXi image, converted it to Player 2.x image via VMWare Standalone Converter). I've also setup a vlan (vlan5) on the host with 10.0.0.x and I'd like Cobbler to use that VLAN to serve any incoming requests. How do I wire up my VMWare to use the VLAN I've setup? Just one of the NICs. What I'm trying to do is to offer a laptop with a VM that our sysadmins can go, plug it into a box (which does not connect to the interwebs) and install RHEL images via cobbler. So essentially, its a cross over cable from the network port on the lappy to the Dell server box. PXE boot in the dell box and install RHEL. I have the cobbler working fine under VMWare ESXi but not so on the VMWare Player because of the VLAN issue - I think. Any ideas?

  Read the article

• SqlCmd : Login timeout expired from localhost

  - by mschr

  I've setup the instance SQLEXPRESS via SQL Server 2008 R2 installation, added a security login with all server roles, one called 'sqluser'. The server authentication is SQL Server and Windows Authentication mode. However, when i specify the -S property, login fails. There is no firewall enabled and SQL server even accepts connections from remote hosts. C:\Users\user>sqlcmd -U sqluser -P qwerty -Q "Select * FROM testdb.dbo.testtable" Output: integer ------- 1 2 3 4 (4 rows affected) However when specifying 'localhost' the query fails... Question is Why? C:\Users\user>sqlcmd -S localhost/sqlexpress -U cpt -P 1234 -Q "Select * FROM cpt.dbo.testme" Output: HResult 0x43, Level 16, State 1 Named Pipes Provider: Could not open a connection to SQL Server [67]. Sqlcmd: Error: Microsoft SQL Server Native Client 10.0 : A network-related or in stance-specific error ..... Sqlcmd: Error: Microsoft SQL Server Native Client 10.0 : Login timeout expired. Changing 'localhost' with '%COMPUTERNAME' is same result if someone would be wondering. The server is running as a LocalSystem instance.

  Read the article

• How do I make my internal dns forward requests to a given server

  - by ankimal

  We have a DNS server internally that looks up IP addresses for all internal hosts and connects to root dns servers for all other domains (the rest of the internet). Here is my config options { listen-on port 53 { 127.0.0.1;any; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; allow-query {192.168.1.0/24; 127.0.0.1; }; recursion yes; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; view “internal” { // What the home network will see match-clients { 127.0.0.1;any; }; match-destinations { 127.0.0.1;any; }; recursion yes; zone "." IN { type hint; file "named.ca"; }; include "internal_zones.conf"; }; We need to tweak this to go to our ISPs dns, x.y.z.w instead of the root dns servers if the host cannot be resolved internally. Config: Fedora 10/Bind 9.5.2

  Read the article

• Can ping IP address and nslookup hostname but cannot ping hostname

  - by Puddingfox

  I have a DNS server set up on one of my machines using BIND 9.7 Everything works fine with it. On my Windows 7 desktop, I have statically-assigned all network values. I have one DNS server set -- my DNS server. On my desktop, I can ping a third machine by IP fine. I can nslookup the hostname of the third machine fine. When I ping the hostname, it says it cannot find the host. / C:\Users\James>nslookup icecream Server: cake.my.domain Address: xxx.xxx.6.3 Name: icecream.my.domain Address: xxx.xxx.6.9 C:\Users\James>ping xxx.xxx.6.9 Pinging xxx.xxx.6.9 with 32 bytes of data: Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Ping statistics for xxx.xxx.6.9: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\Users\James>ping icecream Ping request could not find host icecream. Please check the name and try again. I have also specified the search domain as my.domain xxx.xxx and my.domain substituted for security Why can I not ping by hostname? I also can not ping using the FQDN. The problem is that this problem is shared by all applications that resolve hostnames. I cannot use PuTTY to SSH to my machines by hostname; only by IP

  Read the article

• Get-ChildItem fails to connect in SQLSERVER drive

  - by Norman Kelm

  I'm having some trouble with the SQLSERVER PSDRIVE. See error below. I only have named instances on my PC, both 2005 and 2008 Added the SQL snapins. The PC is named YODA The SQL instance is SQL2008 Navigate to the Databases folder for YODA\SQL2008. You can see the path below. dir -name spits out a connection error trying to connect to YODASQL2008\DEFAULT when it should be trying to connect to YODA\SQL2008. Then it outputs the db name which is Twitter in this case. Is there something missing from my config? Output: PS SQLSERVER:\SQL\YODA\SQL2008\Databases dir -name Get-ChildItem : SQL Server PowerShell provider error: Could not connect to 'YODASQL2008\DEFAULT'. [Failed to connect to server YODASQL2008. -- A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)] At line:1 char:4 + dir <<<< -name + CategoryInfo : OpenError: (SQLSERVER:\SQL\...tabases\Twitter:SqlPath) [Get-ChildItem], GenericProviderException + FullyQualifiedErrorId : ConnectFailed,Microsoft.PowerShell.Commands.GetChildItemCommand Twitter Repeats with error for every database. Thanks, Norman

  Read the article

• Is anyone using KVM in production?

  - by Andy Shellam

  I've been trying to set up a pair of servers utilising KVM on Ubuntu 9.10 to host 8 virtual machines between them and ended up with various issues from the VMs freezing, to not powering on. I had one virtual server set up and running and was setting up a second, when any operation involving OpenSSL would cause the VM to lock up in a weird way - all network traffic would cease, it wouldn't process logins on the console, but it wasn't taking any CPU time off the host. The first virtual server was identical and worked perfectly. Another VM I tried to setup had installed Ubuntu fine then refused to reboot, throwing kernel exceptions to do with XFS. I've now installed Citrix XenServer 5.5 on both hosts, and am now setting up my third VM with absolutely no issues. I also had the same experience when I tried VMware, but I preferred Xen as it appears to give more features on the free license. My question is am I just unlucky with KVM, or is KVM as unstable as it appears? Are you using, or planning on using, KVM in production, and how successful have you been?

  Read the article

• Wifi as LAN - Is it possible ? How ?

  - by sagar

  Hello ! Every one. I am having a query regarding WiFi network. I am having PC & LapTop. Now, Let me explain the situation. I requested My WiFi providers that I want connection in my PC. So that - WiFi provider set up an Antenna on my building Terrace - They joined a cable to pc & that Antenna. ( I think using RJ45 connector ) - The reason behind this - my pc is not having inbuilt wifi functionality. Now - almost laptops have inbuilt functionality. Now - On terrace there is wifi with superb speed. But on my flat - wifi comes with low speed. so, when ever I use internet on my pc - it has great speed - but my laptop works with low speed. The reason behind this - PC is catching wifi from terrace & laptop is catching the wifi from it's own place. Now, My question is something like this. Can we place an antenna or something like that & connect it to laptop for better wifi speed? ( I am not technical person - Please add comment for down vote - if any ) ( Please add comment for more explanation of my Problem ) Thanks in advance for sharing your knowledge. Sagar

  Read the article

• Wifi as LAN - Is it possible ? How ?

  - by sagar

  Hello ! Every one. I am having a query regarding WiFi network. I am having PC & LapTop. Now, Let me explain the situation. I requested My WiFi providers that I want connection in my PC. So that - WiFi provider set up an Antenna on my building Terrace - They joined a cable to pc & that Antenna. ( I think using RJ45 connector ) - The reason behind this - my pc is not having inbuilt wifi functionality. Now - almost laptops have inbuilt functionality. Now - On terrace there is wifi with superb speed. But on my flat - wifi comes with low speed. so, when ever I use internet on my pc - it has great speed - but my laptop works with low speed. The reason behind this - PC is catching wifi from terrace & laptop is catching the wifi from it's own place. Now, My question is something like this. Can we place an antenna or something like that & connect it to laptop for better wifi speed? ( I am not technical person - Please add comment for down vote - if any ) ( Please add comment for more explanation of my Problem ) Thanks in advance for sharing your knowledge. Sagar

  Read the article

• Sync OneNote Notebooks to/on SkyDrive

  - by Sam

  I've got OneNote running on all computers in our house, using it all the time with several people and computers. The only drawback: I want to keep the copies of OneNote in sync without having to run a dedicated server myself. Right now one of my computers has a folder share, where all others sync to, but this is highly impractical since the computer is not always running. So my question is: is it possible to put the notebook files on a (private) SkyDrive Folder and have all the computers sync to there? This way all computers could keep in sync whenever they got access to the web. Can this be done? and, of course, How? [Update] Maybe I should not have taken knowledge about OneNote as granted: OneNote uses a propietary file format, but has a very good in-file-syncing, working on network shares. Generic 'just sync the complete file' won't be useful at all, because I'd just have 'file has changed on server and on client' conflicts all the time. The sync needs to know OneNote files and be able to sync the content - eg. OneNote itself needs to sync the files, not some generic sync tool.

  Read the article

• TeamCity EC2 Integration via ISA Server

  - by Tim Long

  I have a TeamCity server which is actually installed on SBS 2003 Premium with ISA Server (firewall/proxy) installed. My ADSL connection has multiple IP addresses, which all resolve directly to my SBS external NIC. The NIC is therefore multi-homed and I have allocated one of the IP addresses specifically to TeamCity. In ISA, I've created an access rule to allow the traffic in. I can access my TeamCity server externally and view the web interface, that all works fine. I want to use the Amazon EC2 integration in TeamCity to launch build agents 'in the cloud'. The problem I am having is that when the agent starts, it sees the server and registers, then just sits there waiting. On the server side, the agent appears as 'disconnected'. Examining the settings, the agent's IP address appears to be that of the external NIC. What I think might be happening is that the traffic is undergoing Network Address Translation (NAT) so that TeamCity always thinks the agent is locally installed and therefore can't communicate with the actual remote agent. This seems to happen even though I have a permanent static IP address dedicated to TeamCity. So, the question is this. How can I make traffic to a specific IP address pass through the ISA server un-NATted?

  Read the article

• Need Help Accessing the Vista Wampserver localhost from Virtual PC 2007 running an XP VM.

  - by Reg

  (I had posted this on stack overflow but it was suggested there that I post it here instead). I have a Vista laptop on which I'm running wampserver. I have Virtual PC 2007 setup with Windows XP running on the VM. My goal is to be able to use the XP VM to run IE6 to view the localhost in the Vista wampserver. I'm not interested in having the XP VM have any access to the internet -- only to my Vista wampserver's localhost. The vista wampserver works fine. As suggested on a blog I read, I installed the loopback adapter on Vista and I set the loopback to 192.168.21.1 and I set the xp vm ip to 192.168.21.2. I am able to successfully ping the vista-loopback adapter from the xp vm. I've turned the wampserver to "server online", and I've disabled the firewalls in both the vista host and the xp vm. But for some reason, I still can't seem to get the virtual XP to see the localhost on the vista wampserver. I've tried using the vista //name, and I've tried the ip 192.168.21.1 directly and with the port. For whatever its worth, I'm not able to see anything under the XM VM's network places (though I don't know if I'm supposed to be able to see anything). So at this point I'm stuck and I'm still not sure how to get this XP VM to "talk" to my vista wampserver localhost. Any advice on how to fix this problem is much appreciated. Thanks in advance for your help. -R

  Read the article

• How do I use a Zyxel P660 router as just modem so that I can connect a WRT54GL router in cascade?

  - by Kenji Kina

  I have a Zyxel P660HW-t1 v2 router (which has a DSL port) and a WRT54GL router (which does not) and the exact same situation as in this thread (UPDATE: the connection between both devices is the important part, since I have been able to set the zyxel router to act as bridge by itself quite nicely. I have accessed my internet connection directly through a PC using PPPoE without any problems, the issues arise when I try to connect the WRT54GL router between the zyxel "modem" and my PCs). I've been trying to use my Zyxel P660 as a modem only: Setup P660 to bridge mode. Changed WRT54GL's IP address to 192.168.2.1 to avoid a conflict on the network. Configured the PPPoE settings as required on WRT54GL. The thing is that when I connect the Zyxel modem/router on the WRT54GL's internet port the light doesn't turn on. I can confirm that this port has been working ok, so I'm not really sure what's going between the devices. I checked several settings such as IPs, tried disabling DHCP on Zyxel/Linksys, Firewall on both and still nothing. Also, I tried connecting Zyxel directly to a computer in bridge mode and dialed successfully. I have even posted a question here before, thinking that what I asked there was the only thing I needed to get things done. Unfortunately it wasn't, and the guy that solved his issue didn't give enough details in his post (and is quite unlikely to give more details since he was an anonymous user). For one, I don't know how to do this part: connected to the Zyxel through telnet and forced LAN port 1 to be at 100mb as well I can't find the option that does this on the zyxel router. Not through telnet or the web admin. Can anyone help me solve this?

  Read the article

• "Steam needs to be online to update" - 404 fetching *_osx.zip.*

  - by Chris Boyle

  Since yesterday evening, when I launch Steam on OSX, a self-update progress bar appears instead (at 0 of 30MB or so). This bar does not advance, an error dialog appears: Steam needs to be online to update Please confirm your network connection and try again. The app then exits. This happens whether wifi or ethernet or both are connected, and pings to the outside world succeed throughout. If I look at the logs in Console, they are very similar to this example (though that's not mine). Specifically: Success! http://store.steampowered.com/public/client/steam_client_osx?date=718277 [...] Failed! http://cdn.store.steampowered.com/public/client/breakpad_osx.zip.27f59114a86fcd50533e1d7b128f9300947f9969 Failed! http://cdn.store.steampowered.com/public/client/steam_osx.zip.11a99384214805f2dd3be5084ba6be61d662f8ac Failed! http://cdn.store.steampowered.com/public/client/miles_osx.zip.d9fb546541f59c1fdd03962a605236b1021abab8 Requesting the first URL successfully returns some data including the filenames of the latter three, and requesting any of those gives me a 404 (I've tried multiple clients on multiple continents). Searches on Google and Twitter show about 10-20 others having this problem in the past 24 hours, but hardly the angry mob I'd expect if the problem affected all Steam OSX users. Things that have already been tried with no effect: Switching between wifi and ethernet. Killing all Steam processes including ipcserver. Moving the ~/Library/Application Support/Steam/registry.vdf file away. Requesting those URLs with other clients and from other locations. Interesting: that first URL with the date parameter returns the same content even without that parameter (thus would lead to the same 404s) suggesting that the problem is not necessarily specific to coming from a particular currently-installed version of Steam.

  Read the article

• mysqladmin - Unknown MySQL server host

  - by ert

  I'm trying to connect to a mysql server over a local network. The server is running and listening to post 41322. dylan~$ netstat -ln | s mysql unix 2 [ ACC ] STREAM LISTENING 41322 /var/run/mysqld/mysqld.sock My user is granted all rights from all addresses, and I can log in locally. dylan~$ mysqladmin -P 41322 -h [email protected] create database test mysqladmin: connect to server at '[email protected]' failed error: 'Unknown MySQL server host '[email protected]' (1)' Check that mysqld is running on [email protected] and that the port is 41322. You can check this by doing 'telnet [email protected] 41322' Adding a --verbose flag gives no additional output. I've commented out bind-address=127.0.0.1 in /etc/mysql/my.cnf on the server. I can ssh into the server without a problem. dylan~$ ps a | grep mysql 11131 pts/3 S 0:00 /bin/sh /usr/bin/mysqld_safe 11170 pts/3 Sl 0:03 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-external-locking --port=3306 --socket=/var/run/mysqld/mysqld.sock 11171 pts/3 S 0:00 logger -p daemon.err -t mysqld_safe -i -t mysqld 13710 pts/1 S+ 0:00 grep mysq Any help or thoughts are appreciated.

  Read the article

• SharePoint 2010 User Profile Synchronization

  - by manemawanna

  Hello, I'm completely new to working with SharePoint and Windows Server, but last week I was given a small brief to play with SharePoint 2010 to see how I got along with it. Anyway I've set up a SharePoint server and had a mess around to get some new sites and pages created etc, but I'm now looking to have a try at importing some AD groups. As part of this I've look at these tutorials, here and here. So far I've got through to the process of starting the User Profile Service which works fine, but when I get it starting the User Profile Synchronization service it sits on starting. But when I refresh the page or go to the monitoring section it shows it as aborted. Now I'm new to administering servers like I say and when I start the User Profile Synchronization service it tries to run as NT AUTHORITY\NETWORK SERVICE and asks for a password so I've been providing it with the admin password, now I'm not sure if this is part of the issue or not as I've checked the log files and they seem to say that it doesn't have permissions, which is fair enough, but I can't see how you can change the account even if I wanted to. So if anyone could help it would be appreciated, if you need any further information to help with an answer, just let me know.

  Read the article

• Bridging Virtual Networking into Real LAN on a OpenNebula Cluster

  - by user101012

  I'm running Open Nebula with 1 Cluster Controller and 3 Nodes. I registered the nodes at the front-end controller and I can start an Ubuntu virtual machine on one of the nodes. However from my network I cannot ping the virtual machine. I am not quite sure if I have set up the virtual machine correctly. The Nodes all have a br0 interfaces which is bridged with eth0. The IP Address is in the 192.168.1.x range. The Template file I used for the vmnet is: NAME = "VM LAN" TYPE = RANGED BRIDGE = br0 # Replace br0 with the bridge interface from the cluster nodes NETWORK_ADDRESS = 192.168.1.128 # Replace with corresponding IP address NETWORK_SIZE = 126 NETMASK = 255.255.255.0 GATEWAY = 192.168.1.1 NS = 192.168.1.1 However, I cannot reach any of the virtual machines even though sunstone says that the virtual machine is running and onevm list also states that the vm is running. It might be helpful to know that we are using KVM as a hypervisor and I am not quite sure if the virbr0 interface which was automatically created when installing KVM might be a problem.

  Read the article

• How to run some commands after booting from ArchLinux disk? Or how to change some settings in .iso before booting?

  - by Alexander Ovchinnikov

  How to install Arch Linux with traditional installer with only ssh-access to server? There is nice guide: https://wiki.archlinux.org/index.php/Install_from_SSH I try test this on my home vps: Start VPS with any linux bootable cd and login to remote server (vps) wget http://mirrors.kernel.org/archlinux/iso/latest/archlinux-2010.05-netinstall-x86_64.iso dd if=archlinux-2010.05-netinstall-x86_64.iso of=/dev/sda reboot ... I see, it works but without ssh connection... I need make script, which will send this commands after reboot: aif -p partial-configure-network (and write some information about my server ip etc.) /etc/rc.d/sshd start (need to start sshd) echo "sshd: ALL" /etc/hosts.allow (to allow me login to server, by default deny all) passwd (by default its empty, can't login via ssh with empty password) Can I edit .iso or may be /dev/sda? May be I need write script, which will start after system boot and do this things or may be I can set this settings by default and system will start with correct settings (i think its possible at least in 2. and 3.). Thank you!

  Read the article

< Previous Page | 660 661 662 663 664 665 666 667 668 669 670 671  | Next Page >