Search Results

Search found 19446 results on 778 pages for 'network printer'.

Page 665/778 | < Previous Page | 661 662 663 664 665 666 667 668 669 670 671 672  | Next Page >

• Destination host unreachable - Windows Server 2008

  - by Doug

  Hi There, I'm working with a windows 2008 domain controller, which I'm having issues connecting to internet resources. A small bit of background, this is a 2008 domain controller that has been added into an existing Win 2k domain, with a goal of replacing the older computers. Both of the older controllers can still access internet resources, and so can all the clients. When I ping Google.ca from the new server, it does resolve to an ip address, but then says "Reply from 192.168.123.20: Destination host unreachable." I'm really at a lost now, I've checked and rechecked my ip configuration, the default gateway is my router, the primary DNS server is the my DC, and the secondary DNS is also my router. The DNS server on the domain has a forwarder added for the router as well. Everything on my local network works just fine, all my internal resources can be resolved. For the time being, I've stopped the Firewall service. I'm not 100% used to Server 2008 yet, but it might be a case of just missing something simple. Thanks for your time.

  Read the article

• How to run some commands after booting from ArchLinux disk? Or how to change some settings in .iso before booting?

  - by Alexander Ovchinnikov

  How to install Arch Linux with traditional installer with only ssh-access to server? There is nice guide: https://wiki.archlinux.org/index.php/Install_from_SSH I try test this on my home vps: Start VPS with any linux bootable cd and login to remote server (vps) wget http://mirrors.kernel.org/archlinux/iso/latest/archlinux-2010.05-netinstall-x86_64.iso dd if=archlinux-2010.05-netinstall-x86_64.iso of=/dev/sda reboot ... I see, it works but without ssh connection... I need make script, which will send this commands after reboot: aif -p partial-configure-network (and write some information about my server ip etc.) /etc/rc.d/sshd start (need to start sshd) echo "sshd: ALL" /etc/hosts.allow (to allow me login to server, by default deny all) passwd (by default its empty, can't login via ssh with empty password) Can I edit .iso or may be /dev/sda? May be I need write script, which will start after system boot and do this things or may be I can set this settings by default and system will start with correct settings (i think its possible at least in 2. and 3.). Thank you!

  Read the article

• Giving Select Windows Domain Users Symbolic Link Privilege

  - by fp0n

  I would like to setup select users on our domain to have the ability to create symbolic links on local NTFS drives and network shares without needing to run as Administrator, as part of an application with will call the CreateSymbolicLink() API directly. The default configuration for our users is to be Administrator of their computer and I think I am fighting UAC to make the privileges work the way that I want because of that. I found this link on MSDN: http://social.msdn.microsoft.com/Forums/en-SG/windowssdk/thread/fa504848-a5ea-4e84-99b7-0eb4e469cbef which describes the interaction between the SeCreateSymbolicLinkPrivilege, UAC and a domain but really does not have a solution. Here's the three options I've come up with: 1) Create a new group, give the SeCreateSymbolicLinkPrivilege to the group and assign users to the group 2) Give each individual user (2 now, more later) the privilege 3) Give the privilege to the default User group which opens it up to all Users 4) Change config so Users are not Admins by default (probably would work but not likely) Based on my testing, only 3 works for me and that is the least desirable but I've only got a local server to test with, not a domain. I need to recommend to the admin how to set this up and also have something that we can easily explain to other users of our application that are on their own domain or not on a domain. The other option seems to be to create a Service that runs with a SYSTEM account that creates the links for the application but I'd rather not go that route. Thanks.

  Read the article

• SSH Tunnel for Remote Desktop via Intermediary Server Part II

  - by Mihai Todor

  I asked previously how to configure 2 SSH tunnels using an intermediary server in order to run Remote Desktop through them and I managed to make it work. Now, I'm trying to do the same, using the same machines, but in reverse order. Here's the setup: Windows 7 PC in a private network, sitting behind a firewall. Public access Linux server, which has access to the PC. Windows 7 laptop, at home, on which I wish to do Remote Desktop from the PC. I use Putty on the laptop to create a reverse tunnel from it to the Linux server: R60666 localhost:3389. I use Putty on the PC to create a regular tunnel from it to the Linux server: L60666 localhost:60666. I SSH to the Linux sever and I run telnet localhost 60666 and it seems to produce the expected output, as described in the debugging tips that I received here. I try to connect Remote Desktop from the PC to the laptop: localhost:60666. It asks for my username and password, I click OK and it locks my current session on the laptop (so I see the welcome screen on the laptop instead of my desktop), it shows the "Welcome" message in the Remote Desktop screen and then it just goes black. It doesn't disconnect, it doesn't provide any error and I'm not able to perform any actions in the Remote Desktop screen. I tried the same setup with a Windows XP laptop and I'm experiencing the same symptoms. I also tried to use different ports than 60666, but nothing changed. Does anybody have any idea what I'm doing wrong? Update: As pointed out by @jwinders, I'm not able to run telnet PC 3389 from the Linux server directly. Since Windows Firewall has a rule to allow all connections on port 3389, I have no idea what is blocking it. Fortunately, I'm able to create a SSH tunnel from the Linux machine to the PC ssh 3389:localhost:3389 'domain\user'@PC.

  Read the article

• Migrating Windows XP BOOT.INI Settings to Windows 7 Boot-loader

  - by Synetech inc.

  Two months ago my motherboard died, so I bought a used computer that came with Windows 7. I have since installed my old hard-drive, which had Windows XP on it, in this system. What I am trying to do now is to figure out a way to migrate the settings from XP's BOOT.INI into 7's boot-loader. Below is the BOOT.INI I used in XP (I have reduced the strings and updated the disks to point to the new location of the old HD. Oh and I am not clear on the drive letters. In XP, I could boot the recovery console or MS-DOS from a file in C:\ that contains the boot-sector. I am not sure what drive letter it would be called now—I had to manually change all the drive letters of the old partitions in Windows 7 because it auto-assigned them all wrong/differently). [boot loader] timeout=10 default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP" /fastdetect multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP (Safe)" /safeboot:network /sos /bootlog /noguiboot C:\CMDCONS\BOOTSECT.DAT="Recovery Console" /cmdcons C:\BOOTSECT.DOS="MS-DOS 7.10" /win95 I have looked around, and have only been able to find some bcdedit commands to add XP to the boot-loader, but none that include information on setting safe-mode for it (or changing any of the XP load options for that matter). Not surprisingly I suppose, I have not found anything on adding the XP recovery console or DOS to the Windows 7 boot-loader. (Yes, I tried EasyBCD, but that did not help; it had no options for XP, and the best I managed was to get a choice of booting 7 or normal-mode XP—choosing XP didn't even give the old XP boot menu.) Can anyone please tell me how to export the entries in XP's boot.ini to 7's boot-loader so that on boot, I can choose to load the following: Windows 7 Windows 7 (Safe-mode) (Windows 7 (The Win7 counterpart of the Recovery Console)) Windows XP Windows XP (Safe-mode) Windows XP (Recovery Console) MS-DOS 7.10

  Read the article

• rr.com appended to URL and I don't know why

  - by Steph

  I've been having some pretty bad and intermittent internet connectivity issues. I keep getting timeouts on my browsers, or what appears to be timeouts on my browsers. In Chrome it's generally error 21. FF it times out. And so on. While this is happening, I can go into the command line and ping or traceroute the same domain and it works fine. I use my cellphone on the same network and it's fine connecting to the same domain. And when it fails, it's all domains that are down in all browsers, chrome, FF, etc. I also noticed that when I try to connect to 192.168.1.1 it says in chrome did you mean www.192.168.1.1rr.com but when I enter https://192.168.1.1 it's fine. It only seems to do this in Chrome. This is making me think I have a virus. I did some researching about something called road runner, but I can't find any related traces. I also ran a full virus scan using nod32 (eset) and nothing. Any suggestion or help would be greatly appreciated. The intermittent loss of total internet access is really annoying and I'm worried about why it's trying to append the rr.com domain in Chrome. I suspect I'm dealing with two different issues, but you never know. Also for the DNS I'm using Google's DNS servers, the famous 8.8.8.8 and 8.8.8.4

  Read the article

• Skype performance in IPSEC VPN

  - by dunxd

  I've been challenged to "improve Skype performance" for calls within my organisation. Having read the Skype IT Administrators Guide I am wondering whether we might have a performance issue where the Skype Clients in a call are all on our WAN. The call is initiated by a Skype Client at our head office, and terminated on a Skype Client in a remote office connected via IPSEC VPN. Where this happens, I assume the trafficfrom Client A (encrypted by Skype) goes to our ASA 5510, where it is furtehr encrypted, sent to the remote ASA 5505 decrypted, then passed to Client B which decrypts the Skype encryption. Would the call quality benefit if the traffic didn't go over the VPN, but instead only relied on Skype's encryption? I imagine I could achieve this by setting up a SOCKS5 proxy in our HQ DMZ for Skype traffic. Then the traffic goes from Client A to Proxy, over the Skype relay network, then arrives at Cisco ASA 5505 as any other internet traffic, and then to Client B. Is there likely to be any performance benefit in doing this? If so, is there a way to do it that doesn't require a proxy? Has anyone else tackled this?

  Read the article

• Windows or Linux for VPN-VPN Bridge

  - by James

  I have the following network layout: Network1 ----VPN1-----Network2----VPN2----Network3 I can administer everything in Network1 only and my goal is to get to a box on Network3. I've been told by the admins of Network2 that it's not possible for them to route traffic from Network1 to Network3. I've finally been authorised to host a box in Network2 and I'm hoping with this I can set something up to resolve the issue. My question is should I set this up as a Windows or a Linux box. My initial thought was to use iptables to reroute requests but with my lack of experience with Windows Server (used for something or other in Network2) I'm not sure if this will work. My head's full of questions like: - can I get an ip without logging in to a windows domain? - if I do get an ip, do Windows Servers manage routing through the VPN? - can I make a linux box authenticate with Windows Server to log on to the domain? - would it just be easier to set up a windows box? - is it possible to configure a windows box to do routing from Network1 to Network3? Has anyone done anything like this before? Had experience managing Windows Server? Authenticated (or not as the case may be) to a Windows domain? I'd really appreciate your advice. It might be worth mentioning that the overall objective is to establish a telnet connection from a box on Network1 to a box on Network3.

  Read the article

• Configure APE-Server on Ubuntu10.10 webserver

  - by sadmicrowave

  I'm having problems configuring my ape-server. First, I reside behind a corporate firewall where our own DNS servers are maintained. I requested a domain name for my server and was provided uslonsweb003.us.mycompany.com from my IT group. Therefore, my website works and can be accessed via (intranet only) at http://uslonsweb003.us.mycompany.com/test.php. I followed the instructions at ape-project.org and run the Check Tool at the end only to find I get an error stating: Running test : Contacting APE Server (adding frequency) Can't contact APE Server. Please check the folowing url is pointing to your APE server : http://0.uslonsweb003.us.mycompany.com:6969 my /etc/apache2/apache2.conf module looks as follows: <VirtualHost *:80> Servername uslonsweb003.us.mycompany.com ServerAlias ape.uslonsweb003.us.mycompany.com ServerAlias *.ape.uslonsweb003.us.mycompany.com DocumentRoot "/var/www/" </VirtualHost> my /var/www/ape-jsf/Demos/config.js config section looks as follows: APE.Config.baseUrl = 'http://uslonsweb003.us.mycompany.com/ape-jsf'; APE.Config.domain = 'uslonsweb003.us.mycompany.com'; APE.Config.server = 'uslonsweb003.us.mycompany.com:6969'; The instructions at ape-project.org tell me that the APE.Config.server should be `ape.mydomain.com:6969'; but that does not work (I'm assuming because my corporate DNS does not understand the 'ape' before the domain name since 'ape' was not registered with the IT DNS). So therefore, I changed it to what you see above. Please help!! Thanks in advance UPDATE 1 per the installation instructions located on this page http://www.ape-project.org/wiki/index.php/Advanced_APE_configuration under 'Configure your Server/Computer' (I'm running it on a server obviously) It says I need to add some lines to my DNS config file. It sounds like (since I'm within a corporate network) I would ask my IT group to add the following lines to the DNS configuration file on their end: ape IN A x.x.x.x ; IP address of my APE server *.ape IN CNAME ape I just want to make sure this is all I have to have them add (or if this is even correct) before I ask them.

  Read the article

• Trouble with IIS SMTP relaying to Gmail

  - by saille

  I appreciate that similar questions have been asked about how to setup SMTP relaying with IIS's virtual SMTP server. However I'm still completely stumped on this problem. Here's the setup: IIS 6.0 SMTP server running on Win2k3 box with a NAT'ed IP. Company uses Gmail for all email services. An app on the box needs to send email, so normally we'd just set the app up to talk to smtp.gmail.com directly, but this app doesn't support TLS. Easy, we just setup a local SMTP relay right? So I thought. What we have done so far: Setup IIS SMTP server to relay to smtp.gmail.com, as per these excellent instructions: http://fmuntean.wordpress.com/2008/10/26/how-to-configure-iis-smtp-server-to-forward-emails-using-a-gmail-account/ The local SMTP relay allows anonymous access. Both the local IP and the loopback IP have been explicitly allowed in the Connection... and Relay... dialogs. Tried sending email from 2 different apps via the local SMTP server, but failed (the emails end up in the Queue folder, but never get sent). The IIS logs show the conversation with the local app, but zero conversation happening with smtp.gmail.com. The port used by gmail is open outbound, and indeed the apps we have that support TLS can send email directly via smtp.gmail.com, so there is no problem with the network. At this point I changed the smtp settings in IIS SMTP server to use a different external SMTP server and hey-presto, the local apps can send email via local IIS SMTP relay. So smtp.gmail.com fails to work with our IIS SMTP relay, but another 3rd party SMTP service works fine. We need to use smtp.gmail.com, so how to troubleshoot this one?

  Read the article

• Issue configuring Oracle database for SSL

  - by Santhosha Kaldambe

  Hello, I want to setup Oracle for SSL communication. I am not using SSL authentication for database user. As first requirement, generated self signed certificate using OpenSSL and added certificate to wallet. The wallet location is specified in server configuration. Created listener and it is starting however it does not provide any service. The default listener (non SSL) is working fine. When I execute LSNRCTL.EXE status SSLLISTENER it gives below output. STATUS of the LISTENER Alias SSLLISTENER Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Production Start Date 14-NOV-2009 01:47:08 Uptime 16 days 22 hr. 14 min. 3 sec Trace Level off Security ON: Local OS Authentication SNMP OFF Listener Parameter File C:\app\Administrator\product\11.1.0\db_1\network\admin\listener.ora Listener Log File c:\app\administrator\diag\tnslsnr\\ssllistener\alert\log.xml Listening Endpoints Summary... (DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=)(PORT =2484))) The listener supports no services The command completed successfully Here is exact content of various files after configuration. 1) File Name: tnsnames.ora ORCL = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = )(PORT 1521)) ) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl) ) ) 2) File Name: sqlnet.ora SSL_VERSION = 0 NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT) sqlnet.authentication_services= (NONE) tcp.validnode_checking = no tcp.invited_nodes=(PS0803.oraebs.com,PS2948,PS5098) SSL_CLIENT_AUTHENTICATION = FALSE WALLET_LOCATION = (SOURCE = (METHOD = FILE) (METHOD_DATA = (DIRECTORY = C:\app\Administrator\admin\orcl\Server_Wallet) ) ) 3) File Name: listener.ora SSL_CLIENT_AUTHENTICATION = FALSE WALLET_LOCATION = (SOURCE = (METHOD = FILE) (METHOD_DATA = (DIRECTORY = C:\app\Administrator\admin\orcl\Server_Wallet) ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) ) (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = )(PORT 1521)) ) ) SSLLISTENER = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCPS)(HOST = )(PORT = 2484)) ) Thanks Santhosh

  Read the article

• s3cmd fails too many times

  - by alfish

  It used to be my favorite backup transport agent but now I frequently get this result from s3cmd on the very same Ubuntu server/network: root@server:/home/backups# s3cmd put bkup.tgz s3://mybucket/ bkup.tgz -> s3://mybucket/bkup.tgz [1 of 1] 36864 of 2711541519 0% in 1s 20.95 kB/s failed WARNING: Upload failed: /bkup.tgz ([Errno 32] Broken pipe) WARNING: Retrying on lower speed (throttle=0.00) WARNING: Waiting 3 sec... bkup.tgz -> s3://mybucket/bkup.tgz [1 of 1] 36864 of 2711541519 0% in 1s 23.96 kB/s failed WARNING: Upload failed: /bkup.tgz ([Errno 32] Broken pipe) WARNING: Retrying on lower speed (throttle=0.01) WARNING: Waiting 6 sec... bkup.tgz -> s3://mybucket/bkup.tgz [1 of 1] 28672 of 2711541519 0% in 1s 18.71 kB/s failed WARNING: Upload failed: /bkup.tgz ([Errno 32] Broken pipe) WARNING: Retrying on lower speed (throttle=0.05) WARNING: Waiting 9 sec... bkup.tgz -> s3://mybucket/bkup.tgz [1 of 1] 28672 of 2711541519 0% in 1s 18.86 kB/s failed WARNING: Upload failed: /bkup.tgz ([Errno 32] Broken pipe) WARNING: Retrying on lower speed (throttle=0.25) WARNING: Waiting 12 sec... bkup.tgz -> s3://mybucket/bkup.tgz [1 of 1] 28672 of 2711541519 0% in 1s 15.79 kB/s failed WARNING: Upload failed: /bkup.tgz ([Errno 32] Broken pipe) WARNING: Retrying on lower speed (throttle=1.25) WARNING: Waiting 15 sec... bkup.tgz -> s3://mybucket/bkup.tgz [1 of 1] 12288 of 2711541519 0% in 2s 4.78 kB/s failed ERROR: Upload of 'bkup.tgz' failed too many times. Skipping that file. This happens even for files as small as 100MB, so I suppose it's not a size issue. It also happens when I use put with --acl-private flag (s3cmd version 1.0.1) I appreciate if you suggest some solution or a lightweight alternative to s3cmd. Thanks

  Read the article

• Site to Site VPN with Fault Tolerence

  - by Nordberg

  Hello, I have a situation where I require an IPSEC tunnel between two sites. Site 2 is a small branch office with basic (ADSL) connectivity and Site 1 is the "main" office with SDSL and ADSL for redundancy should the SDSL fail. From Site 1, all traffic bound for the 172.0.0.0 network will then be sent down another IPSEC tunnel to a supplier's Remote Server. See this page for the basic premise (this is a rough idea and things can be moved about etc...) I am considering specifying Cisco ASA devices as the firewalls for both sites for all connections. Would it be possible to employ something like HSRC to provide a backup at Site 1 should the SDSL go down? I suppose the key aims here are that Site 2 can somehow failover to initiate a VPN to the ASA behind the ADSL at Site 1. I will have a 21 subnet mask on all internet connections so can play with Class C routing if need be... If I'm barking up the wrong tree with HSRC, is there another way I can acheive this without massive expenditure on Barracuda routers et al? Many Thanks.

  Read the article

• Web server with static IP from cable provider

  - by Dmitri

  I have a subscription to 5 static IP addresses. I want to run a web server from behind a router. My network config is as follows: Server's local address is 10.1.10.2, has IIS running on it, port 80 and 443 (IIS is not my fault, had to be done) the server's ip address is static, the subnet mask is 255.255.255.0, gateway is 10.1.10.1, which is the local address of the cable modem / router / gateway thingy. All looks to be in textbook order as far as the LAN goes. I can get to anything on my LAN from any computer on my LAN, whether they have static IP or get it through DHCP from the cable modem/router thingy. however, I have no internet access form any of my LAN computers. I called Comcast tech support and they say they can connect to my modem/router just fine and can actually use it to ping any computer on the internet or any computer on my LAN from the router/modem (i checked, myself, this is in fact the case). However, nothing on my LAN has internet connectivity. I tried pinging the DNS servers, nothing. I tried directly typing in web sites' IP addresses, nothing, so doesn't seem to be a DNS issue. Any Ideas? What malfunction of a router could be causing such weird behavior? nay ideas or educated guesses are very much appreciated.

  Read the article

• Can ping IP address and nslookup hostname but cannot ping hostname

  - by jao

  On a windows 2003 server I can nslookup www.google.com which returns Server: localhost Address: 127.0.0.1 Non-authoritative answer: Name: www.l.google.com Addresses: 74.125.79.104, 74.125.79.147, 74.125.79.99 Aliases: www.google.com I can then ping 74.125.79.104: Pinging 74.125.79.104 with 32 bytes of data: Reply from 74.125.79.104: bytes=32 time=16ms TTL=54 Reply from 74.125.79.104: bytes=32 time=32ms TTL=54 Reply from 74.125.79.104: bytes=32 time=15ms TTL=54 Reply from 74.125.79.104: bytes=32 time=15ms TTL=54 Ping statistics for 74.125.79.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 15ms, Maximum = 32ms, Average = 19ms But I cannot ping www.google.com: Ping request could not find host www.google.com. Please check the name and try again. (this one is different from the other question in that this one has a TLD, it is not a local domain.) Update: I am running a dns server at localhost (127.0.0.1). Even when I change it to use for example opendns, it still can nslookup hostname and ping ip address, but not ping hostname. So what is wrong? Update 2: here is the ipconfig /all result: Windows IP Configuration Host Name . . . . . . . . . . . . : SERVER Primary Dns Suffix . . . . . . . : NETWORK.local Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : NETWORK.local Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2 Physical Address. . . . . . . . . : 00-0F-1F-56-3B-AA DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.7.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.7.1 DNS Servers . . . . . . . . . . . : 127.0.0.1 Update 3: Thanks everyone for their help and suggestions. I appreciate that. Ipconfig /flushdns returns: Sucessfully flushed the DNS resolver cache Ipconfig /displaydns returns: 2.7.168.192.in-addr.arpa ---------------------------------------- Record Name . . . . . : 2.7.168.192.in-addr.arpa. Record Type . . . . . : 12 Time To Live . . . . : 0 Data Length . . . . . : 4 Section . . . . . . . : Answer PTR Record . . . . . : webserver.mydomainname.com 1.0.0.127.in-addr.arpa ---------------------------------------- Record Name . . . . . : 1.0.0.127.in-addr.arpa. Record Type . . . . . : 12 Time To Live . . . . : 0 Data Length . . . . . : 4 Section . . . . . . . : Answer PTR Record . . . . . : localhost Update 4: Wireshark shows the following: 3 11.540542 208.67.220.220 192.168.7.2 DNS Standard query response A 74.125.79.99 A 74.125.79.104 A 74.125.79.147 6 42.056794 192.168.7.2 192.168.7.255 NBNS Name query NB WWW.GOOGLE.COM<00> which is weird: when I ping, it sends a packet to 192.168.7.255 instead of asking the DNS server for an address

  Read the article

• Problem with MS DTC on SQL2008 win server 2k8 with linked server from sql2000 win server 2k

  - by user31648

  Hi, We have migrated our db from sql2000 win server 2k to sql2008 win server 2k8. We have linked server from sql2000 win server 2k. By our opinion the problem is with DTC and we have made a lot of setting that we found as solution for our problem, but still the problem exist. There is no any error or worning or information niether in the sql log nor in win event viewer. The application is hanging out and at the end the time out exception is shown. What we have done till now: Enable Network DTC Access with inbound and outbound with No Authentication Required on win 2k8 We have opened RPC dynamic port allocation through registry on 2k and 2k8 We have entered subkey TurnOffRpcSecurity in the registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSDTC and made it enable on 2k and 2k8 We have added exception for DTC in firewall for all entities What we have notice that when we restart SQL service and make the first try for our transaction the following is shown: "Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required." and after it: "Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required." Does someone have any idea what else can be done in order to solve the problem? Thanks in advance. Regards, Snezana

  Read the article

• Azure can't ping or telnet VM from client

  - by Raif

  I have a VM on Azure with an instance sqlserver 2012 running on it. From my work computer and my home computer I can't get sqlserver management studio connect to it. I have looked at ALL the settings recommended in numerous articles. everything is setup correctly. endpoint 1433 Private and public sqlserver tcp enabled. sqlserver tcp listening on right port sqlserver using mixed auth windows fire wall, holes poked and then disabled on both client and VM can log in from VM using the credentials that I'm trying to use remotely further more I can't ping the dns or ip or tellnet address from my local machines. I can however hit the iis from a browser using the ip. strange. CS asked me to download MS Network Monitor, which I did and pinged and telneted. I have the results saved but can't really make heads or tails of them. CS hasn't responded yet. I can post some info here that would help. EDIT Never one to shrink from a challenge, I deleted my VM and re-did everything. Now it works although my confidence azure is somewhat shaken.

  Read the article

• No video playback when using home sharing on iTunes for Windows

  - by Diago

  I recently configured iTunes Home Sharing on my home network. My WHS server is the central library sharing both my Music and Video files. All my videos are encoded into H.264/MP4 format. All my machines are authorized and has access to Home Sharing. All my machines are running the latest version of iTunes 9. On my Snow Leopard machines iTunes happily plays the videos and music with no issues. On the Windows 7 machines however the play button fades for about 2 seconds when selecting a shared video and then nothing happens. The Windows machines are running the latest Community Codec Pack. Music sharing works perfectly on the Windows machines. When accessing the videos through the native WHS media connect sharing as well as through the file share I can play them perfectly on the Windows 7 machines. When adding the file to the iTunes library on the Windows 7 machine it also plays perfectly. Any advice, ideas or suggestions as to how to play the videos I have shared through Home Sharing on Windows 7?

  Read the article

• Force Windows Local Subnet Traffic through a Gateway

  - by Beerey

  Hi all, We are attempting to route all traffic from a certain machine to a gateway. This works ok for traffic destined for subnets outside of the machine's subnet. However, traffic to machines in the same subnet as the source machine goes through an On-Link gateway in Windows. This means that the default gateway is ignored, and traffic in a subnet (for example, 192.168.50.10 - 192.168.50.11) flows. Destination Netmask Gateway Interface Metric 192.168.50.0 255.255.255.0 On-link 192.168.50.214 276 This route can be deleted from Windows, but when the machine is rebooted it always comes back. Adding a persistant static route to the gateway with a lower metric doesn't work, since it will still try the On-Link gateway after the persistant route fails. Adding each machine in a VLAN isn't an option due to the setup we have Adding a startup script to delete the gateway isn't a great option either, since users will have full admin access to the machine and might disable the script. We cannot transperantly intercept all network traffic on the subnet using Gratuitous ARPs or transparent proxying, since there are other machines on the subnet which use a different gateway The only way we have gotten it to work is by adding a persistant route to the gateway for the subnet traffic, and deleting the On-link route on reboot. The question is then. Is there a way to permanently remove this On-link route If not, is there a way to otherwise force even local subnet traffic to go through a gateway?

  Read the article

• ipvsadm lists a few hosts by IP only, rest by name

  - by dmourati

  We use keepalived to manage our Linux Virtual Server (LVS) load balancer. The LVS VIPs are setup to use a FWMARK as configured in iptables. virtual_server fwmark 300000 { delay_loop 10 lb_algo wrr lb_kind NAT persistence_timeout 180 protocol TCP real_server 10.10.35.31 { weight 24 MISC_CHECK { misc_path "/usr/local/sbin/check_php_wrapper.sh 10.10.35.31" misc_timeout 30 } } real_server 10.10.35.32 { weight 24 MISC_CHECK { misc_path "/usr/local/sbin/check_php_wrapper.sh 10.10.35.32" misc_timeout 30 } } real_server 10.10.35.33 { weight 24 MISC_CHECK { misc_path "/usr/local/sbin/check_php_wrapper.sh 10.10.35.33" misc_timeout 30 } } real_server 10.10.35.34 { weight 24 MISC_CHECK { misc_path "/usr/local/sbin/check_php_wrapper.sh 10.10.35.34" misc_timeout 30 } } } http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.fwmark.html [root@lb1 ~]# iptables -L -n -v -t mangle Chain PREROUTING (policy ACCEPT 182G packets, 114T bytes) 190M 167G MARK tcp -- * * 0.0.0.0/0 w1.x1.y1.4 multiport dports 80,443 MARK set 0x493e0 62M 58G MARK tcp -- * * 0.0.0.0/0 w1.x1.y2.4 multiport dports 80,443 MARK set 0x493e0 [root@lb1 ~]# ipvsadm -L IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn FWM 300000 wrr persistent 180 -> 10.10.35.31:0 Masq 24 1 0 -> dis2.domain.com:0 Masq 24 3 231 -> 10.10.35.33:0 Masq 24 0 208 -> 10.10.35.34:0 Masq 24 0 0 At the time the realservers were setup, there was a misconfigured dns for some hosts in the 10.10.35.0/24 network. Thereafter, we fixed the DNS. However, the hosts continue to show up as only their IP numbers (10.10.35.31,10.10.35.33,10.10.35.34) above. [root@lb1 ~]# host 10.10.35.31 31.35.10.10.in-addr.arpa domain name pointer dis1.domain.com. OS is CentOS 6.3. Ipvsadm is ipvsadm-1.25-10.el6.x86_64. kernel is kernel-2.6.32-71.el6.x86_64. Keepalived is keepalived-1.2.7-1.el6.x86_64. How can we get ipvsadm -L to list all realservers by their proper hostnames?

  Read the article

• Open Source PDF reader for windows as an alternative to Adobe reader

  - by Tom Feiner

  With the latest javascript vulnerabilities in Adobe reader and bloat it has aquired over the years, I've been thinking of moving the network I'm in charge of to a different product for PDF reading on Windows. The ideal PDF reader should be something that is: Small in size (Adobe reader is more than 200MB these days after installation). As secure by default as possible (For example, javascript disabled by default). Nice looking and easy to use interface. Not bloated with features (I just want to read PDFs, that's it). Does not install any toolbars/unwanted add ons/spyware. Does not display any ads while viewing PDFs. Preferably Open Source. (this pretty much ensures no ads). Full Unicode support. Idealy , something like evince from gnome, will be the best option, but unfortunately that's not available on Windows. Foxit is an option, as it is small, and has a nice interface. But it still has javascript enabled by default which might lead to vulnerabilities - and it installs a toolbar , and displays ads while reading PDFs which is distracting. There is a site dedicated to Open Source PDF readers, pdfreaders.org, however, the Windows pdf readers each have their problems, mostly the interface is not as convenient (as evince, adobe or foxit). Here's a list of all PDF software from WikiPedia. There's a "Viewers" section for each OS. What Windows PDF reader would you recommend ?

  Read the article

• Could not continue scan with NOLOCK due to data movement during installation

  - by dbdev1

  Hi, I am running Windows Server 2008 Standard Edition R2 x64 and I installed SQL Server 2008 Developer Edition. All of the preliminary checks run fine (Apart from a warning about Windows Firewall and opening ports which is unrelated to this and shouldn't be an issue - I can open those ports). Half way through the actual installation, I get a popup with this error: Could not continue scan with NOLOCK due to data movement. The installation still runs to completion when I press ok. However, at the end, it states that the following services "failed": database engine services sql server replication full-text search reporting services How do I know if this actually means that anything from my installation (which is on a clean Windows Server setup - nothing else on there, no previous SQL Servers, no upgrades, etc) is missing? I know from my programming experience that locks are for concurrency control and the Microsoft help on this issue points to changing my query's lock/transactions in a certain way to fix the issue. But I am not touching any queries? Also, now that I have installed the app, when I login, I keep getting this message: TITLE: Connect to Server Cannot connect to MSSQLSERVER. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 67) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=67&LinkId=20476 BUTTONS: OK I went into the Configuration Manager and enabled named pipes and restarted the service (this is something I have done before as this message is common and not serious). I have disabled Windows Firewall temporarily. I have checked the instance name against the error logs. Please advise on both of these errors. I think these two errors are related. Thanks

  Read the article

• Sticky connection and HTTPS support for HAProxy

  - by Saif

  We have 2 HTTP Load balancer with HAproxy and heartbeat. There are 4 apache nodes in this cluster. It's doing round robin load balancing. The HTTP cluster working fine. We are having problem with our portal because it uses SSO. We need sticky connection support in our HAproxy. Also we need load balancing for HTTPS traffic. Here's our HAproxy conf file. global # to have these messages end up in /var/log/haproxy.log you will # need to: # # 1) configure syslog to accept network log events. This is done # by adding the '-r' option to the SYSLOGD_OPTIONS in # /etc/sysconfig/syslog # # 2) configure local2 events to go to the /var/log/haproxy.log # file. A line like the following can be added to # /etc/sysconfig/syslog # # local2.* /var/log/haproxy.log # log 127.0.0.1 local0 log 127.0.0.1 local1 notice chroot /var/lib/haproxy pidfile /var/run/haproxy.pid maxconn 4000 user haproxy group haproxy daemon # turn on stats unix socket stats socket /var/lib/haproxy/stats #--------------------------------------------------------------------- # common defaults that all the 'listen' and 'backend' sections will # use if not designated in their block #--------------------------------------------------------------------- defaults mode http log global option httplog option dontlognull option http-server-close option forwardfor except 127.0.0.0/8 option redispatch retries 3 timeout http-request 10s timeout queue 1m timeout connect 10s timeout client 1m timeout server 1m timeout http-keep-alive 10s timeout check 10s maxconn 3000 #--------------------------------------------------------------------- # main frontend which proxys to the backends #--------------------------------------------------------------------- frontend main *:5000 acl url_static path_beg -i /static /images /javascript /stylesheets acl url_static path_end -i .jpg .gif .png .css .js use_backend static if url_static default_backend app #--------------------------------------------------------------------- # static backend for serving up images, stylesheets and such #--------------------------------------------------------------------- backend static balance roundrobin server static 127.0.0.1:4331 check #--------------------------------------------------------------------- # round robin balancing between the various backends #--------------------------------------------------------------------- backend app listen ha-http 10.190.1.28:80 mode http stats enable stats auth admin:xxxxxx balance roundrobin cookie JSESSIONID prefix option httpclose option forwardfor option httpchk HEAD /haproxy.txt HTTP/1.0 server apache1 portal-04:80 cookie A check server apache2 im-01:80 cookie B check server apache3 im-02:80 cookie B check server apache4 im-03:80 cookie B check Please advice. Thanks for your help in advance.

  Read the article

• Virtual Machines Renaming/Backing up/Sharing

  - by evan

  I've started using VMware virtual machines for all of my software development projects and have a few questions for others doing the same thing. First, how can you rename the virtual machine and the name of the virtual hard drive? I have a base development machine that I clone for different projects. I'd like to name the machine and it's hard drive according the the project (right now when I copy them via cut and paste, the file names remain the same and I can only organize them by putting them in a specific directory). Second, what is the best way to back up a virtual machine? Is it possible (by breaking the virtual hard drive up into chunks instead of one big file) to get incremental backups working? It seems time machine always tries to make a copy of the whole thing which is time consuming because each virtual machine is around 30GB. Finally, how slow would it be to have a virtual machine shared on an NFS mount on a wireless N network and used from multiple computers (but with only one person using it at a time.) Would it be more reasonable on a gigabit lan connection? Thanks for your input! And please feel free to share any advice or wisdom about using virtual machines for software development and the best ways to speed them up!

  Read the article

• Ingress filtering in Linux traffic control: Redirect traffic to IFB device

  - by Dani Camps

  I have an openwrt router and I want to shape incoming traffic in order to classify all the traffic addressed to a certain IP address in my home network as low priority. For that purpose I want to redirect all traffic incoming to the eth1 interface, the one connected to the DSL modem, to an IFB device where I will do the shaping. These are the details of my system: Linux OpenWrt 2.6.32.27 #7 Fri Jul 15 02:43:34 CEST 2011 mips GNU/Linux Here is the script I am using where the last instruction is failing: # Variable definition ETH=eth1 IFB=ifb1 IP_LP="192.168.1.22/32" DL_RATE="900kbps" HP_RATE="890kbps" LP_RATE="10kbps" TC="tc" # Configuring the ifbX interface insmod ifb insmod sch_htb insmod sch_ingress ifconfig $IFB up # Adding the HTB scheduler to the ingress interface $TC qdisc add dev $IFB root handle 1: htb default 11 # Set the maximum bandwidth that each priority class can get, and the maximum borrowing they can do $TC class add dev $IFB parent 1:1 classid 1:10 htb rate $LP_RATE ceil $DL_RATE $TC class add dev $IFB parent 1:1 classid 1:11 htb rate $HP_RATE ceil $DL_RATE # Redirect all ingress traffic arriving at $ETH to $IFB $TC qdisc del dev $ETH ingress 2>/dev/null $TC qdisc add dev $ETH ingress $TC filter add dev $ETH parent ffff: protocol ip prio 1 u32 \ match u32 0 0 flowid 1:1 \ action mirred egress redirect dev $IFB The last instruction fails with: Action 4 device ifb1 ifindex 9 RTNETLINK answers: No such file or directory We have an error talking to the kernel Does anyone know what am I doing wrong ? Best Regards Daniel

  Read the article

< Previous Page | 661 662 663 664 665 666 667 668 669 670 671 672  | Next Page >