Search Results

Search found 19446 results on 778 pages for 'network printer'.

Page 669/778 | < Previous Page | 665 666 667 668 669 670 671 672 673 674 675 676  | Next Page >

• Intermittent "Lost connection to MySQL server at 'reading initial communication packet'"

  - by db2

  Our web environment consists of two servers. Web front-end. Dell PowerEdge R610, RHEL 5.5, Apache 2.2.17, php 5.2.14. Database server. Dell PowerEdge R710, Windows 2008 R2 Standard x64, MySQL 5.5.11-log x64. Normally these two work perfectly fine together. However, when I try to get them talking via a dedicated LAN on their secondary NICs (each machine has four of them), things get flaky. I have NIC #2 on both machines configured on the 172.16.1.0/24 subnet, with no gateway or DNS servers (obviously, since it's just those two systems), and I put the private IP address of each machine into the hosts file of the other. The routing tables on both machines look okay after I do this. I've tried this with both a crossover cable draped directly between the two NICs, and also via a dedicated vlan on the switch in the rack. In either case, I get intermittent connection problems. It's a fairly small percentage of connections that fail, but it's enough to cause a significant problem, and I have to switch back to the main network connection, which will contend with all the other traffic and hosts on the switch. The full error message that appears in the application log: SQLSTATE[HY000] [2013] Lost connection to MySQL server at 'reading initial communication packet', system error: 110 Am I doing something really dumb that's causing this to not work properly? Anything I can check in MySQL that would explain why it's failing to connect occasionally?

  Read the article

• How to redirect all Internet traffic to OpenVPN Server

  - by JuliaS

  I have seen working solutions around the issue of forcing Internet traffic to go through the OpenVPN server but they are all done in Linux, all I want to know is how to add an entry to the route table in windows to make this happen. connectivity between the client and server is fine, my Windows 7 client can establish a connection to the Windows 2008 Server, but when established Internet traffic is still going from the local Windows 7 machine. Here are the details: Server: Windows 2008 Server with one NIC OpenVPN IP Address: 192.168.0.1 Local NIC IP Address (connects the server to the Internet): 10.242.69.107 Client: Windows 7 with one NIC OpenVPN IP Address: 192.168.0.2 ISP allocated IP Address: 10.0.8.2 (gateway 10.0.8.1) Server OpenVPN Config: dev tun ifconfig 192.168.0.1 192.168.0.2 secret static.key push "redirect-gateway def1" Client OpenVPN Config: remote xxx.xxx.com dev tun ifconfig 192.168.0.2 192.168.0.1 secret static.key I'm not an expert with adding routes...etc. I would be grateful if someone could let me know how to add this entry in my server/client route table. EDIT: Output from the client's netstat -rnv IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.0.8.1 10.0.8.2 20 10.0.8.0 255.255.255.252 On-link 10.0.8.2 276 10.0.8.2 255.255.255.255 On-link 10.0.8.2 276 10.0.8.3 255.255.255.255 On-link 10.0.8.2 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.252 On-link 192.168.0.2 286 192.168.0.2 255.255.255.255 On-link 192.168.0.2 286 192.168.0.3 255.255.255.255 On-link 192.168.0.2 286 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.0.8.2 276 224.0.0.0 240.0.0.0 On-link 192.168.0.2 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.0.8.2 276 255.255.255.255 255.255.255.255 On-link 192.168.0.2 286 ===========================================================================

  Read the article

• Linux on Sony Vaio VPCEB1S1E

  - by Jaakko

  I bought Sony Vaio VPCEB1S1E and I was able to surf on net. Then I tried to install Ubuntu 9.04 and Linux Mint on it but neither allows me an access to the Internet. How can I configure Mint so that I can go to net and get updates via apt-get? jaakko@jaakko-laptop ~ $ ifconfig -a lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:720 (720.0 B) TX bytes:720 (720.0 B) pan0 Link encap:Ethernet HWaddr 46:83:d4:f4:36:bc BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 78:dd:08:c5:61:88 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wmaster0 Link encap:UNSPEC HWaddr 78-DD-08-C5-61-88-00-00-00-00-00-00-00-00-00-00 UP RUNNING MTU:0 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) jaakko@jaakko-laptop ~ $ ping 8.8.8.8 connect: Network is unreachable

  Read the article

• Blank desktop when logging into a Virtualized Windows 2008 Terminal Server?

  - by Rachel

  We have a Virtualized Terminal Server running Windows Server 2008. When the admin user logs in, everything is fine. When anyone else logs in, their desktop and start menu is blank (they have the taskbar, start button, and quick launch links though). If I go into Windows Explorer, I can see icons in their desktop folder (although the icon image is missing and it is just displaying the generic icon), but can't run any of them. If I login with a user that is part of the Administrator group in Active directory, I get the same behavior except I can launch the programs found in the Desktop Folder of Windows Explorer. I cannot drag these items out onto the desktop though - The cursor doesn't allow me to drop them. From Task Manager I can see that explorer.exe and dwm.exe are both running. The Authenticated Users and Interactive groups are both under the Users group, along with our network's Domain Users group. Does anyone know why this is happening and how I can fix it? Also, not sure if it's related but about 1 in every 3 logins just hangs at a completely blank blue screen (no start button, taskbar, or quick launch buttons) and needs to be disconnected / reset by an admin. Edit I just noticed that the desktop itself doesn't even respond to click events. It's almost like the entire desktop is missing. At first I thought it didn't respond to right-click events because of an AD policy, but then I noticed if you open the Start Menu and click the desktop, the start menu doesn't shut like it should

  Read the article

• How to improve Windows Server 2008 R2 to handle many connections?

  - by invisal

  It has been a few days so far that I am trying to figure how to solve this problem. First of all, I am running a website with an average daily page view of 350,000. Previously, all ads management (tracking click and impression that each ads has served) and content were served in a single server with the following spec: Server 1 OS: Windows 2008 R2 64-Bit CPU: Intel® Core™ i5 - 4 cores RAM: 8 GB Storage: 2 x 1 TB hard drives Bandwidth: 10 TB per month To improve our website speed, I decided to separate the ads management script to another dedicated server because we have more than 15 advertisers to 30 advertisers per each page. Server 2 OS: Windows 2008 R2 64-Bit CPU: Intel® Core™ i5 - 4 cores RAM: 4 GB Storage: 2 x 300 GB hard drives Bandwidth: 10 TB per month The Problem The problem is that Server 1 can handle both content and ads system. Now, that I take away the ads system and put it at Server 2. Server 2 can barely serve only ads system. Test First of all, I moved 75% of the ads to Server 2. And then, perform a ping to server: ping -t xxxxx. [I did the ping for 10 minutes and its following similar pattern as below] Reply from xxxxx bytes=32 time=290ms TTL=116 Reply from xxxxx bytes=32 time=289ms TTL=116 Reply from xxxxx bytes=32 time=320ms TTL=116 Reply from xxxxx bytes=32 time=286ms TTL=116 Reply from xxxxx bytes=32 time=286ms TTL=116 Reply from xxxxx bytes=32 time=348ms TTL=116 Reply from xxxxx bytes=32 time=284ms TTL=116 Then, I moved 100% of the ads to Server 2. Then, perform a ping to server again. [I did the ping for 10 minutes and its following similar pattern as below] Reply from xxxxx bytes=32 time=290ms TTL=116 Request timed out Reply from xxxxx bytes=32 time=320ms TTL=116 Reply from xxxxx bytes=32 time=286ms TTL=116 Request timed out Request timed out Reply from xxxxx bytes=32 time=284ms TTL=116 Attempts Increase MaxUserPort and TcpNumConnection Restart the server Increase IIS Max Instances and Instance MaxRequests Server Resource Only 10%-15% of the network connection is used Only 10%-15% of the CPU is used Only 25% of the memory is used

  Read the article

• WAMP server not starting and a mystery service is using port 80

  - by David Gard

  I'm using WAMP on Windows 7 and tonight I'm unable to start it (it's been working fine for about 3 years previously). I first checked the logs, but nothing in there. So I checked the Windows Event Viewer (eventvwr), where I saw 2x errors for each attempted start - The Apache service named reported the following error: (OS 10048)Only one usage of each socket address (protocol/network address/port) is normally permitted. : make_sock: could not bind to address 0.0.0.0:80. The Apache service named reported the following error: no listening sockets available, shutting down. After this, I opened the command prompt and ran netstat -a, and to my surprise there were 3 entries for port 80 - Prot   Local Address  Foreign Address   State TCP   127.0.0.1:80       MyPCName:53831   TIME_WAIT TCP   127.0.0.1:80       MyPCName:57834   TIME_WAIT TCP   127.0.0.1:80       MyPCName:57839   TIME_WAIT From here, I'm kind of lost. As far as I can tell, something is utalising port 80, but I don't know what or why. If anyone is able to suggest what I might do next I'd be most greatful. Thanks.

  Read the article

• Drobo FS vs. MacBook Pro: Finder works, Drobo Dashboard doesn't

  - by dash-tom-bang

  Does anyone have any experience with the new Drobo FS, specifically using it from a MacBook Pro? My experience thus far is this: Set up the Drobo Dashboard software (hereinafter called simply 'Dashboard') on my WinXP machine, which is hard-wired to the network to do the data migration from my NAS-that's-being-replaced (a 250G SimpleShare which works well enough but I was always afraid of losing the one disk). The Dashboard seems to work ok, except that the DroboCopy function doesn't work at all. This is the backup solution, which I can configure, and if I launch it (e.g. to back up from the old NAS to the Drobo) it spins the NAS, seeking the drive all over hell and creation, until finally giving up an hour+ later with zero files copied. Selecting only a subset of the data yields the same effect albeit more quickly. On my Mac I installed the Dashboard software too, since most of my fiddling with the device will be from my couch in the living room. Finder connects to the box just fine, fwiw, but Dashboard just sits there, "waiting for connection." This is considerably more bothersome than the above paragraph, but I figured I'd give whatever information I have. Drobo is insisting that I send them this "Debug Log" file that their software generates. Does anyone know what's in it? It's encrypted and they won't tell me, which spooks me just a bit; not like I'm terribly concerned about privacy but I don't want to be sending personal information out to every clown who says they "need" it in order to help me. thanks a ton, -tom!

  Read the article

• Wireless disconnect randomly with wpa_supplicant reason=2

  - by renenglish

  I installed ubuntu-server 12.04 on my PC , and I use an usb wireless card to join the network. It works ok when I boot up my PC , but the wireless disconnects after a while. I pkill wpa_supplicant and reload the driver rtl8192cu , then it works a again. Then it disconnect again after about a random minutes. Here is the syslog: 22384 May 29 21:49:27 homecenter kernel: [ 6450.459313] wlan1: authenticated 22385 May 29 21:49:27 homecenter kernel: [ 6450.459535] wlan1: associate with f4:ec:38:45:62:74 (try 1) 22386 May 29 21:49:27 homecenter kernel: [ 6450.469080] wlan1: RX AssocResp from f4:ec:38:45:62:74 (capab=0 x431 status=0 aid=3) 22387 May 29 21:49:27 homecenter kernel: [ 6450.469085] wlan1: associated 22388 May 29 21:49:27 homecenter wpa_supplicant[2342]: Associated with f4:ec:38:45:62:74 22389 May 29 21:49:27 homecenter kernel: [ 6450.481933] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready 22390 May 29 21:49:27 homecenter wpa_supplicant[2342]: WPA: Key negotiation completed with f4:ec:38:45:62:7 4 [PTK=CCMP GTK=CCMP] 22391 May 29 21:49:27 homecenter wpa_supplicant[2342]: CTRL-EVENT-CONNECTED - Connection to f4:ec:38:45:62: 74 completed (auth) [id=0 id_str=] 22392 May 29 21:49:38 homecenter kernel: [ 6461.472014] wlan1: no IPv6 routers present 22393 May 29 21:49:38 homecenter ntpdate[2263]: step time server 91.189.94.4 offset 0.012758 sec 22394 May 29 21:49:51 homecenter ntpdate[2404]: step time server 91.189.94.4 offset -0.001190 sec 22395 May 29 21:54:38 homecenter kernel: [ 6762.052030] wlan1: deauthenticated from f4:ec:38:45:62:74 (Reas on: 2) 22396 May 29 21:54:38 homecenter wpa_supplicant[2342]: CTRL-EVENT-DISCONNECTED bssid=f4:ec:38:45:62:74 reas on=2 22397 May 29 21:54:38 homecenter kernel: [ 6762.064744] cfg80211: All devices are disconnected, going to re store regulatory settings 22398 May 29 21:54:38 homecenter kernel: [ 6762.064752] cfg80211: Restoring regulatory settings 22399 May 29 21:54:38 homecenter kernel: [ 6762.064757] cfg80211: Calling CRDA to update world regulatory d omain 22400 May 29 21:54:38 homecenter kernel: [ 6762.069938] cfg80211: Ignoring regulatory request Set by core s ince the driver uses its own custom regulatory domain 22401 May 29 21:54:38 homecenter kernel: [ 6762.069943] cfg80211: World regulatory domain updated: 22402 May 29 21:54:38 homecenter kernel: [ 6762.069945] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 22403 May 29 21:54:38 homecenter kernel: [ 6762.069949] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KH z), (300 mBi, 2000 mBm) 22404 May 29 21:54:38 homecenter kernel: [ 6762.069952] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KH z), (300 mBi, 2000 mBm) 22405 May 29 21:54:38 homecenter kernel: [ 6762.069956] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KH z), (300 mBi, 2000 mBm) 22406 May 29 21:54:38 homecenter kernel: [ 6762.069959] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KH z), (300 mBi, 2000 mBm) 22407 May 29 21:54:38 homecenter kernel: [ 6762.069962] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KH z), (300 mBi, 2000 mBm)

  Read the article

• Outlook slow to open attachments

  - by Alistair McMillan

  When a colleague tries to open attachments in her email (Outlook 2003 talking to an Exchange 2007 server) they talk ages to open. The files are relatively small, all less than 1MB. We've tried creating a new Windows profile for the user and tried creating new Outlook profiles, however that hasn't made any difference. And we've tried accessing her account from someone else's PC, and the attachments open immediately there. The only thing that might provide a clue is that Process Monitor shows Outlook on her PC trying to write the file to a folder within the user's "Temporary Internet Files" folder with FAST I/O DISALLOWED errors. Can't find a lot of useful information on that message online though. What causes the FAST I/O DISALLOWED errors? And would that make opening attachments so incredibly slow that opening a < 1MB file can take a matter of minutes? UPDATE: Discovered that this isn't just an issue with Outlook. Other files being accessed over the network show the same FAST I/O DISALLOWED errors in Process Monitor. The problem is just more noticeable with Outlook, because although other applications take a while to open files it isn't a matter of minutes.

  Read the article

• Failed to bring up eth1 in a dual ips solution in ubuntu

  - by lxyu

  I'm using ubuntu 12.04. I tried to assign two ips to two ethernet cards in my server. The content of /etc/network/interfaces is like this: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 114.80.156.a netmask 255.255.255.224 gateway 114.80.156.b auto eth1 iface eth1 inet static address 114.80.156.c netmask 255.255.255.240 gateway 114.80.156.d a b c d have different values, which means the two ips are in different vlans. But I can only bring up eth0 with this command: $ /etc/init.d/networking restart RTNETLINK answers: File exists Failed to bring up eth1. ...done. I have checked the question here which shows the same problem like the one I encountered: Can only bring up one of two interfaces But it seems it's not really solved. And in my situation, I need the 2 ips to use 2 different gateways. So how to fix this problem? Edit1, changed the example config ip from 192.168.0.0/16 subnet to another 'real' subnet. Edit2, the purpose of doing this is fairly simple. Because the ip range I previous in don't have more room for new servers, and I have to move to another ip range. So I want to make the public servers bind to 2 ips for the transition period. I only have really limited knowledge about routing and subnet. @BillThor @rackandboneman, would you please give me some keywords or links on how to setup route for 2 ips? and @Mike Pennington, how do you know I speak chinese?

  Read the article

• How a batch file runs on a remote machine started by PSEXEC

  - by user38780

  I am having an issue running a Batch file on a remote machine suing PSEXEC. The file runs but does not run like it does when run through remote desktop. The batch runs a file which is a 32 bit application, which opens multiple 16bit applications, this should all run under one ntvdm.exe (In one Memory Space). Through remote desktop the batch file runs under the explorer process, and works correctly opening only one ntvdm.exe. Using PSEXEC the batch runs but not under the explorer process, a separate ntvdm.exe is open for each process. I found running the batch from explorer in PSEXEC works, but comes up with a "File Download - Security Warning" eg. psexec.exe" \compname -u username -p passowrd -s -d -i 0 explorer C:\Program.bat I want to be able to run the batch successfully without receiving warnings, it is a local warning and not a network share warning. Possible to recreate warning typing "explorer C:\windows\system32\cmd.exe" in Run I would like to know if anyone knows of a way to get PSEXEC to open the batch file to run as though it was started by explorer. Or a way of removing the local "File Download - Security Warning" Thanks

  Read the article

• Can't find disk usage in one directory

  - by Xster

  Similar questions are asked frequently but no suggested answers solved my issue. I have some disk space usage that I can't find as well. In df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 144183992 136857180 2652 100% / udev 2013316 4 2013312 1% /dev tmpfs 808848 876 807972 1% /run none 5120 0 5120 0% /run/lock none 2022116 76 2022040 1% /run/shm overflow 1024 0 1024 0% /tmp I checked the inodes, I checked lsof for +L1 or deleted files, I rebooted, I checked for files hidden behind mounts but none of them were the issue. It grows periodically and I'm running out of things to delete to feed the beast. It's all in the home directory of the only user I have. In du in ~ du -h --max-depth=1 192K ./.nv 2.1M ./.gconf 12K ./Pictures 1.6M ./.launchpadlib 12K ./Public 24K ./.TemporaryItems 8.9M ./.cache 12K ./Network Trash Folder 28K ./.vnc 11M ./.AppleDB 48K ./.subversion 1.9G ./.xbmc 8.0K ./.AppleDesktop 12K ./.dbus 81M ./.mozilla 12K ./Music 160K ./.gnome2 44K ./Downloads 692K ./.zsh 236K ./.AppleDouble 64K ./.pulse 4.0K ./.gvfs 1.4M ./.adobe 44K ./.pki 44K ./.compiz-1 168K ./.config 1.4M ./.thumbnails 12K ./Templates 912K ./.gstreamer-0.10 8.0K ./.emacs.d 92K ./Desktop 1.3M ./.local 12K ./Ubuntu One 12K ./Documents 296K ./.fontconfig 12K ./.qt 12K ./.gnome2_private 20K ./.ssh 20K ./.mission-control 12K ./Videos 12K ./Temporary Items 640K ./.macromedia 124G . I can't find a way to figure out how it got to that 124G in that directory. There are no mount points in home.

  Read the article

• Juniper router dropping pings to external interface

  - by Alexander Garden

  My organization has a Juniper SSG20-WLAN that routes our traffic to the outside world. We've been having intermittent problems with our internet connection so I wrote up a Python script to ping the internal interface of the router, the external interface, a couple of our internal servers, the ISP router our router talks to, their upstream provider, and Google and Yahoo for good measure. It does that about every minute. What I have found is that when our internet goes out, our Juniper router ceases responding to pings on the external interface. Everything past that is, of course, unreachable. The internal interface and our internal servers continue to echo back without interruption. None of the counters indicate dropped packets of any type. They all look normal. The logs complain about VIP servers being unavailable but otherwise nothing indicative of network issues. My questions are these: Does this exonerate our ISP? Or, contrawise, might a problem with the connection be causing the external interface to go down? Is there somewhere else in the SSG20, beside the system log and counters, that might help me track down info on the problem? UPDATE: Turned out that one of the switches between my monitoring box and the router was a router itself, and occasionally diverting from the gateway to itself. Kudos to those who made suggestions along those lines. Not really sure which answer to mark as accepted, as it was really stuff in the comments that turned out to be right. Thanks for the suggestions.

  Read the article

• Lock down Wiki access to password only but remain open to a subnet via .htaccess

  - by Treffynnon

  Basically we have a Wiki that has some sensitive information stored in it - not the best I know but my predecessor set it up. I want to be able to request password access from any one who is not on the local network subnet. Those on the local subnet should be able to proceed without entering a password. The following .htaccess does not seem to work any more as it is letting non-local access without requiring the password: AuthName "Our Wiki" AuthType Basic AuthUserFile /path/to/passwd/file AuthGroupFile /dev/null Require valid-user Allow from 192.168 Satisfy Any order deny,allow And I cannot work out why. The WikkaWiki it is supposed to be protecting was recently upgraded, which clobbered the .htaccess file so I restored the above from memory/googling. Maybe I am missing an important directive? The full .htaccess is as follows: AuthName "Our Wiki" AuthType Basic AuthUserFile /path/to/passwd/file AuthGroupFile /dev/null Require valid-user Allow from 192.168 Satisfy Any SetEnvIfNoCase Referer ".*($LIST_OF_ADULT_WORDS).*" BadReferrer order deny,allow deny from env=BadReferrer <IfModule mod_rewrite.c> # turn on rewrite engine RewriteEngine on RewriteBase / # if request is a directory, make sure it ends with a slash RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^(.*/[^/]+)$ $1/ # if not rewritten before, AND requested file is wikka.php # turn request into a query for a default (unspecified) page RewriteCond %{QUERY_STRING} !wakka= RewriteCond %{REQUEST_FILENAME} wikka.php RewriteRule ^(.*)$ wikka.php?wakka= [QSA,L] # if not rewritten before, AND requested file is a page name # turn request into a query for that page name for wikka.php RewriteCond %{QUERY_STRING} !wakka= RewriteRule ^(.*)$ wikka.php?wakka=$1 [QSA,L] </IfModule>

  Read the article

• Stream video file in debian?

  - by Rob

  I've tried ffserver with ffmpeg, I've tried VLC, and I'm not sure what else to try or what I've done wrong. I've gone through, with VLC +-[ robert@s10 ]--[ ~ ] +[#!]¬ vlc --version VLC media player 2.0.0 Twoflower (revision 2.0.0-0-g421a4fc) VLC version 2.0.0 Twoflower (2.0.0-0-g421a4fc) Compiled by buildd on biber.debian.org (Mar 1 2012 22:21:37) Compiler: gcc version 4.6.2 (Debian 4.6.2-14) This program comes with NO WARRANTY, to the extent permitted by law. You may redistribute it under the terms of the GNU General Public License; see the file named COPYING for details. Written by the VideoLAN team; see the AUTHORS file. and tried everything I could in the streaming section, but I can't get the stream to actually work. Looking around, apparently debian strips the encoders from the package? I want to do share some videos I've made with friends on IRC, and it would be easiest if I could just stream it so we can all watch at the same time and critique parts of it in real time. Has anyone done something similar? Linux s10 3.2.0-2-686-pae #1 SMP Tue Mar 20 19:48:26 UTC 2012 i686 GNU/Linux Basic home network, I am behind a NAT (192.168.1.*) and have dynamic DNS set up. That doesn't really matter too much, I can figure that out, but it's not even working locally. I have a file server set up and could just share the files that way, but I'd rather have everyone watching at the same time (or just about). Not worried about installing new packages or building something from source, that's not a big issue, just want to get it working. Big plus if I can do it from command line.

  Read the article

• Apache Derby running within Tomcat causes shutdown issues

  - by Luke

  I have set up Derby Network Server to be hosted within a Tomcat environment. This works great. However, when I shut down Tomcat I get the following errors: 04/01/2011 10:41:41 AM org.apache.catalina.core.StandardService stop INFO: Stopping service Catalina 04/01/2011 10:41:41 AM org.apache.catalina.loader.WebappClassLoader clearReferencesJdbc SEVERE: The web application [/derby] registered the JBDC driver [org.apache.derby.jdbc.ClientDriver] but failed to unregister it when the web application was stopped. To prevent a memory leak, the JDBC Driver has been forcibly unregistered. 04/01/2011 10:41:41 AM org.apache.catalina.loader.WebappClassLoader clearReferencesJdbc SEVERE: The web application [/derby] registered the JBDC driver [org.apache.derby.jdbc.AutoloadedDriver] but failed to unregister it when the web application was stopped. To prevent a memory leak, the JDBC Driver has been forcibly unregistered. 04/01/2011 10:41:41 AM org.apache.catalina.loader.WebappClassLoader clearReferencesThreads SEVERE: The web application [/derby] appears to have started a thread named [derby.NetworkServerStarter] but has failed to stop it. This is very likely to create a memory leak. 04/01/2011 10:41:41 AM org.apache.catalina.loader.WebappClassLoader clearReferencesThreads SEVERE: The web application [/derby] appears to have started a thread named [NetworkServerThread_4] but has failed to stop it. This is very likely to create a memory leak. 04/01/2011 10:41:41 AM org.apache.catalina.loader.WebappClassLoader clearReferencesThreads SEVERE: The web application [/derby] appears to have started a thread named [DRDAConnThread_5] but has failed to stop it. This is very likely to create a memory leak. 04/01/2011 10:41:41 AM org.apache.catalina.loader.WebappClassLoader clearReferencesThreads SEVERE: The web application [/derby] appears to have started a thread named [DRDAConnThread_13] but has failed to stop it. This is very likely to create a memory leak. 04/01/2011 10:41:41 AM org.apache.coyote.http11.Http11Protocol destroy INFO: Stopping Coyote HTTP/1.1 on http-8080 I'm currently starting and stopping Tomcat with the following commands: ./catalina run ./catalina stop Is there a better way to shutdown Tomcat with Derby or can this be solved by a configuration change?

  Read the article

• IIS8 behind a VPN + Windows Server 2012 - how to properly bind IP+Port

  - by ryugen

  This is my first question so I hope I'm going to give you enough information. I'm running Windows Server 2012 within the Hyper-V environment of my Windows 8 machine. Within Windows Server 2012 I'm running a VPN tool based on openVPN to hide my real IP. When I run IIS8 with the VPN disconnected it works flawlessly through the Internet (port 80 forwarded correctly). But as soon as I connect to the VPN I can't reach my site through the domain anymore. Now I tried basically everything I know which is why I'm asking you guys. I tried binding IIS8 to the IP of my virtual ethernet card. I tried changing the priority of the NIC through the "Network and sharing center" via the advanced tab. I used ipconfig /flushdns in case there was something wrong in the DNS handling. Hell, I even turned off the Windows firewall. I also used a port scanner to verify the problem. The webserver is reachable on port 80 with VPN disconnected and immediately gets unreachable on connect. Theoretically both IPs (my regular one AND the VPN) should be reachable or at least not impair the other one right? Do you have any other suggestion? Do I have to route something somewhere somehow?

  Read the article

• cygwin sshd times out for remote login

  - by reve_etrange

  I have configured SSHD using Cygwin on Windows 7. I have checked and double-checked all of the following points: Port forwarding is correctly configured Windows Firewall is configured to pass port 22 Local login attempts (using Cygwin SSH) succeed sshd_config has UseDNS No Using nmap from remote machine confirms port 22 is accessible /etc/passwd and /etc/group are correctly populated However, remote login attempts time out. This includes from the local network. user@host:~$ ssh -vvv [email protected] OpenSSH_5.5p1 Debian-4ubuntu6, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /home/user/.ssh/config debug1: Applying options for * debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to the.ip.add.ress [the.ip.add.ress] port 22. debug1: connect to address the.ip.add.ress port 22: Connection timed out ssh: connect to the.ip.add.ress port 22: Connection timed out No messages are logged to /var/log/sshd.log. I suspect that there is a permissions issue with a particular file somewhere, however I have checked the permissions of all my Cygwin binaries, DLLs and the particular files important to Cygwin sshd, including all of: /etc/passwd /etc/group /var /var/log/sshd.log /var/empty Others who have reported this or similar errors appear to have missed one of the points enumerated above. Can anyone point me to a possible solution?

  Read the article

• Migrating Windows XP BOOT.INI Settings to Windows 7 Boot-loader

  - by Synetech inc.

  Hi, Two months ago my motherboard died, so I bought a used computer that came with Windows 7. I have since installed my old hard-drive, which had Windows XP on it, in this system. What I am trying to do now is to figure out a way to migrate the settings from XP's BOOT.INI into 7's boot-loader. Below is the BOOT.INI I used in XP (I have reduced the strings and updated the disks to point to the new location of the old HD. Oh and I am not clear on the drive letters. In XP, I could boot the recovery console or MS-DOS from a file in C:\ that contains the boot-sector. I am not sure what drive letter it would be called now—I had to manually change all the drive letters of the old partitions in Windows 7 because it auto-assigned them all wrong/differently). [boot loader] timeout=10 default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP" /fastdetect multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP (Safe)" /safeboot:network /sos /bootlog /noguiboot C:\CMDCONS\BOOTSECT.DAT="Recovery Console" /cmdcons C:\BOOTSECT.DOS="MS-DOS 7.10" /win95 I have looked around, and have only been able to find some bcdedit commands to add XP to the boot-loader, but none that include information on setting safe-mode for it (or changing any of the XP load options for that matter). Not surprisingly I suppose, I have not found anything on adding the XP recovery console or DOS to the Windows 7 boot-loader. (Yes, I tried EasyBCD, but that did not help; it had no options for XP, and the best I managed was to get a choice of booting 7 or normal-mode XP—choosing XP didn't even give the old XP boot menu.) Can anyone please tell me how to export the entries in XP's boot.ini to 7's boot-loader so that on boot, I can choose to load the following: Windows 7 Windows 7 (Safe-mode) (Windows 7 (The Win7 counterpart of the Recovery Console)) Windows XP Windows XP (Safe-mode) Windows XP (Recovery Console) MS-DOS 7.10

  Read the article

• How to increase wifi speed for laptops

  - by sagar

  Now, Let me explain the situation. I am having a query regarding Wi-Fi network. I am having PC & laptop. I requested my Wi-Fi providers that I want connection in my PC. So that - Wi-Fi provider set up an Antenna on my building Terrace - They joined a cable to pc & that Antenna. ( I think using RJ45 connector ) - The reason behind this - my does not have a built in Wi-Fi adapter. Now - almost laptops have built in Wi-Fi. Now - On terrace there is Wi-Fi with superb speed. But on my flat - Wi-fi comes with low speed. So, when ever I use internet on my pc - it has great speed - but my laptop works with low speed. The reason behind this - PC is catching wifi from terrace & laptop is catching the wifi from it's own place. Now, My question is something like this. Can we place an antenna or something like that & connect it to laptop for better wifi speed? ( I am not technical person - Please add comment for down vote - if any ) ( Please add comment for more explanation of my Problem ) Thanks in advance for sharing your knowledge. Sagar

  Read the article

• System hangs while rebooting on Debian...

  - by Usman

  Hi, I have Debian (Kernel 2.6.26-2-686) installed on two computers. On one of them it reboots quite finely but I am having following problem with rebooting Debian on my second computer. When i type reboot at the Linux prompt, following messages appear and system hangs up after saying "Restarting System": Broadcast message from root@myname (tty1) (Sun Jan 17 11:23:26 2010) The system is going down for reboot NOW! INIT: Switching to runlevel: 6 INIT: Sending processes the TERM signal Saving system clock Stopping enhanced syslog: rsyslogd. Asking all remaining processes to terminate...done. Deconfiguring network interfaces...done. Cleaning up ifupdown.... Deactivating swap...done. [ 31.789103] Restarting System. _ Normally when the sytem is busy "" sign blinks but "" at the last line above does not blink which shows, the system hanged up. I tried all keys but the screen is still frozen at the same point. The difference that I noted between my two computers is that I don't have ACPI support in the BIOS of the system which is giving me this error whereas the BIOS of my first computer do have ACPI support on which Debain do not give this restart-hanging problem. I have also disabled running the acpid script by running update-rc.d -f acpid remove but the problem still persists on the second computer. Any ideas to solve or get around this problem?

  Read the article

• Installing SQLServer 2005 on Windows 7 64bit

  - by Mostafa

  Hi , It's 3 days I'm trying to install SqlServer 2005 under Windows 7 64 bit on my computer. First let me tell you what I've done and what I've got till now . 1-I Installed Windows 7 64 Bit on my computer 2-I tried to install SQl Server 2005 "Developer Edition" 2.1 But in "System Configuration Check" Page i recieved 2 warning , One for "IIS Feature Requirement" and another for "ASP.NET Version Registration Rquired" . 2.1.1 . I installed "Internet Information Services" from "Turn Windows features on or off" section in control panel 2.1.2 I Enabled reporting service 32 bit from "Inetpub= AdminScripts = adsutil.vbs" 2.2 At this stage There was no waring in System Configuration Check 3- So I installed SQl Server 2005 Developer Edition By all default settings 4- I installed Sql Server 2005 Service Pack 3 64 bit Now when when i run "Management Studio" There is no name in "Server name" section . I typed my Computer name Or "." and i got this Error : A network -related instance-specific error occurred while establishinga connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (Provider: Named Pipes Provider , error :40 - Could not open a connection to SQL Server ) ( Microsoft SQL Server , Error :2) . I googled some for this Error and some people said follow this instruction: Startsql server 2005Configuration toolsSql Server Surface Configuration AreaSurface Area Configuration for services and Connections But i got this Error : No SQl SErver 2005 Components were found on the specified computer . Either no components are installed , or you are not a administrator on this computer (SQLSAC) I'm really tired because of that , and i don't know what's wrong with this . Some more information : I have no additonal software on my computer , like Antivirus or Proxy I tried all step with "Standard Edition" either , but no difference My user is Administrator I tried more than 5 times all those steps including re-installing Windows 7 . Please help me , I'm losing all my hair

  Read the article

• DFSR NTFS Permissions Not Working!??!

  - by megadood

  I have two windwos 2008 standard servers running DFSR okay. I can create a file on one server, it is replicated to the other okay etc. I have the namespace shared folder on each server shared with full control administrators / everyone change/read permissions. I then browse to the folder on server 1 e.g.\server1\namespace\share\folder1. I right click the folder, and configure the NTFS permissions as I would like for example Adminsitrators Full Control / One User Read/Write Access / No other users in the user list. I save this and then double check the second server e.g. \server2\namespace\share\folder1. I right click the same folder name as before and can see the NTFS permissions have replicated accordingly. I right click the folder and go to properties - security - advanced - effective permissions and select a user that shouldnt be able to get into that folder e.g. testuser. It agrees with the NTFS permissions and shows that testuser has no ticks next to any permissions so should be denied access. I logon to any network PC or the server as testuser. Browse to \server1\namespace\share\folder1. It lets me straight in, no access denied messages. The same applies to server2. It seems as thought all my NTFS permissions are being ignored. I have 1 DFS share and then all the subfolders are a mixture of private folders and public folders so need the NTFS permissions to work ideally. Any idea whats going on? Is this normal? From my tests all users can access any DFSR folder under the namespace\share which is quite worrying. Thanks

  Read the article

• snort analysis of wireshark capture

  - by Ben Voigt

  I'm trying to identify trouble users on our network. ntop identifies high traffic and high connection users, but malware doesn't always need high bandwidth to really mess things up. So I am trying to do offline analysis with snort (don't want to burden the router with inline analysis of 20 Mbps traffic). Apparently snort provides a -r option for this purpose, but I can't get the analysis to run. The analysis system is gentoo, amd64, in case that makes any difference. I've already used oinkmaster to download the latest IDS signatures. But when I try to run snort, I keep getting the following error: % snort -V ,,_ -*> Snort! <*- o" )~ Version 2.9.0.3 IPv6 GRE (Build 98) x86_64-linux '''' By Martin Roesch & The Snort Team: http://www.snort.org/snort/snort-team Copyright (C) 1998-2010 Sourcefire, Inc., et al. Using libpcap version 1.1.1 Using PCRE version: 8.11 2010-12-10 Using ZLIB version: 1.2.5 %> snort -v -r jan21-for-snort.cap -c /etc/snort/snort.conf -l ~/snortlog/ (snip) 273 out of 1024 flowbits in use. [ Port Based Pattern Matching Memory ] +- [ Aho-Corasick Summary ] ------------------------------------- | Storage Format : Full-Q | Finite Automaton : DFA | Alphabet Size : 256 Chars | Sizeof State : Variable (1,2,4 bytes) | Instances : 314 | 1 byte states : 304 | 2 byte states : 10 | 4 byte states : 0 | Characters : 69371 | States : 58631 | Transitions : 3471623 | State Density : 23.1% | Patterns : 3020 | Match States : 2934 | Memory (MB) : 29.66 | Patterns : 0.36 | Match Lists : 0.77 | DFA | 1 byte states : 1.37 | 2 byte states : 26.59 | 4 byte states : 0.00 +---------------------------------------------------------------- [ Number of patterns truncated to 20 bytes: 563 ] ERROR: Can't find pcap DAQ! Fatal Error, Quitting.. net-libs/daq is installed, but I don't even want to capture traffic, I just want to process the capture file. What configuration options should I be setting/unsetting in order to do offline analysis instead of real-time capture?

  Read the article

• netlogon errors

  - by rorr

  I have two instances of mssql 2005 and am using CA XOSoft replication. The master is a failover cluster and the replica is a standalone server. They are all running Server 2003 sp2 x64. Same patch levels on all servers. This setup has worked great for several months until we recently restricted the RPC ports on both nodes of the master(5000 - 6000 using rpccfg.exe). We have to implement egress filtering, thus the limiting of the ports. We began receiving login errors for sql windows authentication and NETLOGON Event ID: 5719: This computer was not able to set up a secure session with a domain controller in domain due to the following: Not enough storage is available to process this command. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. We also see group policies failing to update and cluster file shares go offline at the same time. The RPC ports were set back to default when we started seeing these problems and the servers rebooted, but the problems persist. The domain controllers are not showing any errors. Running dcdiag and netdiag shows everything is fine. We have noticed that the XOSoft service ws_rep.exe is using a lot of handles(8 - 9k), about the same number that sqlserver is using. As soon as xosoft replication is stopped the login errors cease and everything functions correctly. I have opened a ticket with CA for XOSoft, but I'm not sure that the problem is actually xosoft, but that it is the one bringing the problem to light. I'm looking for tips on debugging RPC problems. Specifically on limiting the ports and then reverting the changes.

  Read the article

< Previous Page | 665 666 667 668 669 670 671 672 673 674 675 676  | Next Page >