Search Results

Search found 3195 results on 128 pages for 'utility'.

Page 67/128 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

• Same SCSI drive appears multiple times on the controller list

  - by ohad

  Hi, I have an Adaptec AHA-2940UW SCSI adapter, to which I connected a single Atlas 10K III drive (and nothing more). When my computer loads up, the pre-OS Adaptec screen shows (I believe this is called the POST screen), where I can see the Atlas drive listed many times (i.e. with ID0, ID1, ... ID5, ID7, ID8,...,ID15 [ID6 is the adapter itself]) Using the same HD on an Adaptec AHA-2940UB the disk only shows once Since my OS hasn't been installed yet, I'm not sure if this is a problem (I would guess it is), and if so - how to solve it. Termination and multiple LUNs come mind, but the cable provides termination and I don't see why a hard drive would request multiple LUNs, especially considering it is not jumpered at all, and multuple LUN support is disabled in the Adaptec controller BIOS (via the SCSISelect utility) Thank you

  Read the article

• Can Windows 7 restore itself from image to a smaller HDD than original?

  - by Borek

  I've created a full system image using the built-in Win7 utility, it was from a 300GB drive but there is only about 50GB of data. I then swapped disks in my notebook, the new one being 80GB SSD and now when I boot to the system restore applet, go through all of the settings (finding the backed up image on a network share, confirming that I'm willing to repartition my disk etc.), I get this: The system image restore failed. No disk that can be used for recovering the system disk can be found. [Details] Is this because I'm trying to restore to a smaller disk? (Even though the data should fit without any problems, there being only 50GB of it.)

  Read the article

• After Upgrading Ubuntu to 9.10 my hard drive now has a warning.

  - by Sean

  it is a 500gb hard drive format as ext3 path /dev/sdc1 The disk utility does not even see this. This Warning is from gparted: e2label: No such device or address while trying to open /dev/sdc1 Couldn't find valid filesystem superblock. Couldn't find valid filesystem superblock. dump2fs 1.41.9 (22-Aug-2009) dumpe2fs: No such device or address while trying to open /dev/sdc1 Unable to read contents of this file system? Because of this some operations may be unavailable. END OF ERROR MESSAGE Did I lose something during the upgrade of the system? Was it the hard drive or the Ubuntu system that went bad?

  Read the article

• How do I make a partition usable in windows 7 after power loss?

  - by user1306322

  A few days ago I was installing some software and power went down. When I rebooted, the partition to which the software was installed was not accessible. Disk manager shows that it's there, but doesn't show type, if it's healthy and gives me an error when trying to read its properties. The problem seems to be common after power loss, people recommend solving it by assigning a letter to the partition via DiskPart utility, but partition isn't listed in my case. I can access that partition with bootable OSs (like bootable Ubuntu or winXP) and all the files are there, but another installation of Windows 7 gives me the same results as the original. I could just copy all data to another disk if there was enough space, but unfortunately the size of partition I'm having problems with is 1.1TB. How do I regain access to the partition in my original Windows 7 installation without losing any data?

  Read the article

• Intel site says VT-x is supported on my CPU, but tests say otherwise

  - by Anshul

  I have a laptop with an Intel 2nd Gen. i7-2729QM (http://ark.intel.com/products/50067/) and the Intel site says that it supports VT-x, but I've downloaded the Intel Processor Identification Utility (http://www.intel.com/support/processors/tools/piu/sb/CS-014921.htm) and the test says that my CPU does not have VT-x. There is no option in my BIOS that allows me to enable/disable VT-x. I researched my laptop model (SAGER NP8170) and most forums say that it's enabled by default and there's no option in the BIOS. So assuming that's true, what gives? I also downloaded another tool called SecurAble from GRC and it also says that my CPU doesn't support VT-x. VirtualBox also says that my CPU does not support virtualization. My mind is boggled by why it says on the Intel site that my CPU supports VT-x but all other tests show otherwise. Anyone know what's going on? Thanks in advance.

  Read the article

• Run disk error check on NTFS file?

  - by paulius_l

  I have a feeling that my system hard drive is dying. Benchmark kind of enforces it. Here is the benchmark of my system hard drive during low system activity: And here is the benchmark of backup drive: Furthermore, there are some files which I just can't touch because I get CRC errors and the hard drive activity spikes to 100% with operating speeds less than 1 MB/s while working with such files. I haven't yet tried swapping SATA cable as I have read this might cause the problems. Anyway, I would like to run some tests on specific clustsers where those files I am interested in are stored. I don't want to do the full chkdsk because it takes a very long time. I would like to either find the utility which executes the disk check directly on the clusters where the file belongs or a couple utilities where one tells me the cluster locations and another can check just those locations. How do I check and possibly fix disk errors where the files I am interested in are stored? Edit: S.M.A.R.T. info:

  Read the article

• Time Machine (archive) of pre-Leopard systems?

  - by benc

  I want to get off an older Mac OS X system permanently. It is an iBook G3, so that has two important characteristics: Power PC, not Intel based. Runs only Tiger, not Leopard. This means, as far as I can tell: Cannot run Time Machine directly. Here's the approach I have been contemplating: Mount the drive in Firewire mode. Back up the drive as a external drive to the Time Machine volume. Disconnect the drive (permanently). However, I'm concerned that this drive will eventually age out, when the Time Machine volume fills up, and the old-system-as-external-drive is gone. Would it be better to do a single backup with another utility, to shared disk?

  Read the article

• outlook freezes on splash screen - loading profile

  - by sammarcow

  I have a user with a frustrating application crash issue without Outlook: Windows 7 x64 Outlook 2010 crashes on the splash screen with the message "loading profile." I have deleted the users .ost file in "..\AppData\Local\Microsoft\Outlook\" and this crash occurs for multiple users including those with administrator privileges. I have also tried running outlook at the command prompt as an admin with the /safe command-line switch. I tried the repair utility in "programs and features by clicking Change after selecting Microsoft Office:" ~~ Microsoft office failed to successfully repair your product . I tried to uninstall Microsoft Office ~~ Microsoft Office failed to successfully uninstall this product. I am trying to avoid reimaging the machine for obvious reasons. Is there anything else I can try or insight any one has on this issue?

  Read the article

• Asus laptop not retaining Aero theme when unplugged

  - by expiredninja

  The problem i'm having occurs when i unplug my laptop, it disregards several elements of my theme. The taskbar becomes unlocked. My desktop background is turned white. The transparency on my windows goes away. I can fix these things by running the Aero trouble shooting utility, which mentions something about the color bit depth These are these specs for the computer: Asus Laptop / Intel® Pentium® Processor / 15.6" Display / 4GB Memory Model: X54H-BD3MA SKU: 4005394 I'm sure there are duplicates of this, just not sure whick one refers to me. Thank you. Also i think someone should add an "unplugged" tag.

  Read the article

• Time machine link error

  - by robinjam

  When attempting to perform a Time Machine backup, the backup appears to proceed as normal, until it finishes copying files at which point it complains that an "error occurred while linking files for" one of my external hard disks. During the previous backup that particular disk was in fact empty, and therefore I can't understand why Time Machine is attempting to link back to it. But alas. I've verified all my disks using Disk Utility and they all appear to be fine. Does anybody know what causes this error, and how I might go about fixing it? Failing that is there a way to force Time Machine to create a brand new backup rather than an incremental one? Thanks in advance!

  Read the article

• Mac OS X 10.5/6, authenticate against by NIS or LDAP when both servers have your username

  - by Wang

  We have an organization-wide LDAP server and a department-only NIS server. Many users have accounts with the same name on both servers. Is there any way to get Leopard/Snow Leopard machines to query one server, and then the other, and let the user log in if his username/password combination matches at least one record? I can get either NIS authentication or LDAP authentication. I can even enable both, with LDAP set as higher priority, and authenticate using the name and password listed on the LDAP server. However, in the last case, if I set the LDAP domain as higher-priority in Directory Utility's search path and then provide the username/password pair listed in the NIS record, then my login is rejected even though the NIS server would accept it. Is there any way to make the OS check the rest of the search path after it finds the username?

  Read the article

• ntbackup workalike for adhoc full backups in Windows 7 thats free and preferably open source

  - by Justin Dearing

  On windows 2000 and XP machines I used to be able to do the following: ntbackup backup systemstate c: /f e:\backups\machineName\machineName-full+systemstate_200101206.bkf This gave me a full backup of the system that I could use to do a system restore, after doing a barebones OS install. Windows 7 has a great utility for regular backups with alerting and all that stuff. It does not seem to have command line support. I'd like a backup solution for my Windwos 7 systems that has the following features: Is free Is open source (preferebly) Works while the system is booted and leaves the system functional (clonezilla is great for offline backups, and I use that too) Gives me a backup that is suited for a full system restore or partial system restore (ruling out most imaging software even if they could work while the system is booted via some sort of shadow copy voodoo) Can work via the command line Compression would be nice, the ability to pipe output would be better.

  Read the article

• Does Intel Smart Response provide any statistics on the cache usage?

  - by Tom Seddon

  I've set up my Z68-based Core i7 PC with a 60GB SSD dedicated as a Smart Response cache drive. Is there any way I can get any statistics out of it? It would be nice to have some information on how much cache space is actually being used, maybe how much of it was actually accessed recently, and how many reads in general are coming from the SSD rather than from the mechanical disk. These statistics might help to quickly provide some evidence for or against the use of Smart Response, without my having to reinstall Windows on the SSD (etc.) to find out. The Windows ReadyBoost feature has some performance counters you can access via the Windows 7 perfmon tool, for example, which is the kind of thing I'm hoping is somehow available. Smart Response provides no perfmon counters, though, and the Intel Rapid Storage Utility tells you pretty much nothing except that Smart Response is switched on.

  Read the article

• The 'which' command returns nothing via cron, but works via console

  - by Zárate

  Hi there, I've written a little utility in haXe + Neko that needs to execute some GIT commands. To avoid hardcoding the path to the GIT executable I'd like to use the which command to find out where it is. Everything works as expected when running manually from the console, but not when the the app runs on a cron job. I'm aware of the restricted environment (here or here) when you run a script using cron, but still surprised this doesn't work: /usr/bin/which git >> /home/user/git.txt The text file is created but the content is empty. Again, when run from the console it works as expected. Any ideas? I'm running OS X Leopard, if that helps. Thanks : ) Juan

  Read the article

• Batch edit (not rename) file properties in windows

  - by Jay

  I have a large directory of downloaded shareware. I keep track of what i have by individually editing the properties of each program. However, some of the programs are multipart .rar types. And i have at least a few hundred programs so far. I am looking for a utility that will let me batch edit file properties such as Title, Author, Summary, and Comments, so I don't have to edit each file or file part individually. Windows doesn't let me do this in Explorer. Powerdesk has a proprietary system, but it isn't preserved when moving or copying files. Any Suggestions?

  Read the article

• Optimal way to make MySQL backups for fairly large databases (MyISAM / InnoDB)

  - by WinkyWolly

  Currently we have one beefy MySQL database that runs a couple of high traffic Django based websites as well as some e-commerce websites of decent size. As a result we have a fair amount of large databases using both InnoDB and MyISAM tables. Unfortunately we've recently hit a wall due to the amount of traffic so I've setup another master server to help alleviate reads / backups. Now at the moment I simply use mysqldump with a few arguments and it's proven to be fine.. until now. Obviously mysqldump is a slow quick method however I believe we've outgrown its use. I now need a good alternative and have been looking into utilizing Maatkits mk-parallel-dump utility or an LVM snapshot solution. Succinct short version: I have a fairly large MySQL databases I need to backup Current method using mysqldump is inefficient and slow (causing issues) Looking into something such as mk-parallel-dump or LVM snapshots Any recommendations or ideas would be appreciated - since I have to re-do how we're doing things I rather have it done properly / most efficient :).

  Read the article

• Remove Outlook 2007 Calendar from Calendars List

  - by nmuntz

  In our company, we use personal folders with Outlook 2007 and make it the default method of downloading messages to keep our mailbox size on the server side small. Under calendar view, i see both calendars, my personal folder one and my server one. How can I remove from the list of calendars my server one since I do not use that one and it only creates confusion and problems such as adding entries onto that one instead of the other or disabling one and not getting alarms? I tried googling on it and read there is a utility to do that but couldn't find the name of it. Thanks in advance for your help.

  Read the article

• Very slow Windows 7 on Thinkpad T61

  - by bogdanf

  I have a very strange problem with my fresh install of Windows 7 Profesional, 64bits on my Lenovo Thinkpad T61 : The overal performance is very slow, the disk is constantly spinning, even without any program running (after boot, no other programs installed). The boot process is very slow itself (4-5 minutes). I mention that the laptop was fine on XP until the upgrade. Thanks ! Additional info (as requested by the comments) : 2GB RAM Yes, I added all the manufacturer (Lenovo) drivers and updates (using the utility provided by Lenovo) Tried with both 32 and 64 bits editions. The 32 bits one is performing a little better, but not very usable either. The hdd has enough space (20 GB or so) The problem is still present on a fresh install, so no recycle bin emptying or unistall programs (there aren't any except plain 7) would help. I'm not a newbie, so no obvious causes are left unchecked

  Read the article

• What is "queued Windows Error Reporting"?

  - by Rewinder

  I was cleaning up my laptop hard-disk, running Windows 7, and as part of the process I ran the Disk Cleanup utility. To my surprise I saw 2 items in the list that were quite large (both ~300MB). Per user queued Windows Error Reporting System queued Windows Error Reporting I guess I had never noticed these, because they were never that big. So, what are these items? Any particular reason why they became so large all of a sudden? And finally, is it safe to remove them?

  Read the article

• print job doesn't go to print queue

  - by flatsguide

  I have two printers hooked up to my intel imac. I am having a printing error. It seems that whenever i try to print (a simple text doc) I am unable to get the print job to go to print queue with one of my printers. I have a HP c7280 and a HP c3100. I am able to get one working properly, but the other doesn't seem to allow it to go to the print queue. I have switched usb cables (with the printer that I know works) and both printers are recognized by the computer in the printer preferences pane. I've tried reseting the printer system in the printer setup utility.. reloaded the drivers from HP.. etc. If anyone has a suggestion or could point me to a little help i'd be VERY grateful Best Regards.. B

  Read the article

• Okular (on Ubuntu 9.10) prints multiple pages per sheet (n-up) very small

  - by dgleich

  I'm trying to print a set of beamer slides with multiple slides per page (4-up or 6-up). When I select 4 pages or 6 pages per sheet in the Okular print dialog, the pages print quite small (perhaps even tiny -- about 1.75" by 1.25") and leave significant white-space on the page. I can get around this behavior by using the pdfnup utility (in the pdfjam package); which will correctly generate a 4- or 6-up pdf file but it's annoying to generate a second pdf file when I should be able to accomplish this task from the print dialog. Details: Ubuntu 9.10 (Karmic), 64-bit, Color Postscript printer.

  Read the article

• Access RAID configuration in x3550M2

  - by Mike B

  I'm trying to configure RAID in a IBM x3550 M2 server. I can't find any messages on boot about any hotkey to access the configuration utility. I wasn't able either in BIOS. The card is a on board LSI 1068e. I can't find the original CD's shipped with the server, but I downloaded Server Guide 9.21 from IBM web. Booted with that, and only getting stuck at "Windows loading"p. Tried with a 8.? version from a x3550 (M1), but it was less useful. Although I do not consider myself an expert, I'm starting to feel like a newbie luser. Any help?

  Read the article

• git: command not found

  - by B6431

  Using github for the first time. In terminal I receive this error git: command not found If I type in terminal which git it returns nothing. If I type which github it returns /usr/local/bin/github Github's command line utility seems to be installing a github but not a git. echo $PATH returns /usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin. Currently do not have a .bash_profile or .profile. Not sure if that is significant. Am a command line and $PATH rookie but am determined to learn. Mac OS version 10.6.8 and Github version 1.2.8. All advice is appreciated.

  Read the article

• How to columnate text with tabs (in vim or on the shell)

  - by kine

  I have a frequent need to manually manipulate tab-delimited text for data entry and other purposes, and when i do this it helps if the text is aligned properly into columns. For example (assuming 4-space tabs): # original format abcdefghijklmnop field2 abcdefgh field2 abcdefghijkl field2 # ideal format abcdefghijklmnop field2 abcdefgh field2 abcdefghijkl field2 I am very familiar with using the column utility to columnate text this way, but the problem is that it uses spaces to align the columns, and i specifically need tabs. This requirement also appears to rule out the Tabularize plug-in. Is there any way that i can columnate text with tabs specifically, either within vim or at the shell? It looks like i might be able to do it with groff/tbl, but honestly i'd rather columnate it by hand than mess with that....

  Read the article

• does any sync software find files that have moved paths within a folder?

  - by kpierce8

  Say I have a pictures folder which I reorganized on one computer. I'd like to use that directory as the base and compare it with another version on a backup drive. Will any sync/compare program find that a file in one folder has moved locations within a compare folder. For instance say I reorganized my pictures from trips into folders by year with the trips folders inside each year folder. If I use a regular compare utility I wind up with two copies of everything that's moved in different locations.

  Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >