Search Results

Search found 3195 results on 128 pages for 'utility'.

Page 66/128 | < Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >

• Darik's Boot And Nuke - ERROR /dev/sda

  - by user1403844

  I'm trying to wipe the drive of an old company computer with DBAN so I can install Redhat Enterprise and learn Linux (it's a Dell Inspiron 1210, if that matters). I burnt DBAN to a CD and boot from that CD (running on an external USB CD drive). Whenever I try to run the utility--whether it's Autonuke, or any of manual wiping methods-- it spits on the errors: ERROR /dev/sdb ERROR /dev/sda From what I've read on some other forums, there are some issues with other drives or removable media interfering however I've disabled all other drives in bios, leaving just CD/DVD and the Hard Disk but still no luck. Any advice on how I can reconcile these errors and wipe the disk?

  Read the article

• How do I tell if my firewire connection is running as 400 or 800?

  - by Tom

  I have a MacBook Pro with FireWire 800 and a freecom external harddrive that has USB3, FireWire 400 and 800. I am using a Nikkai FireWire 800 cable that has 800 connector on one end and a 400 connector on the other end. The 800 connector is attached to the MacBook pro and the 400 connector is attached to the freecom drive. Is there any way to tell what connection has been established? I looked at disk utility and it simply said 'FireWire'. Is there a command-line tool that would give more information? If it's 400, I plan to swap the cable for 800 connector at both ends.

  Read the article

• HDD bad sectors with OS

  - by Michael Z

  I wonder is that possible for OS to make bad sectors on Hard Drive? Preface: I have bought new HDD on 1Tb WB Caviar Black. I have installed new OS on ext4 partition Ubuntu 12.04.1 LTS. After few days S.M.A.R.T. of the Ubuntu's Disk Utility show that my hard has bad sectors! I have checked on S.M.A.R.T. immediately after installing OS - all was OK. During new OS working I have noticed some strange with HDD - all OS was freezed from 20 sec to 1 min and I have heard like HDD's engine restarting. At the dmes I have found something like this: [40085.407947] ata1.00: device reported invalid CHS sector 0

  Read the article

• Network backup for Macs and PCs - formatting question

  - by neilfein

  I'm trying to use a LaCie 2TB drive as an AirPort drive, for backup on a home network. We have one mac and two PC laptops. My plan is to create a Mac partition and a Windows partition. However, Disk Utility won't let me set the windows partition to Windows format; there's no option in the menu for it in the partition tab. Am I doing something wrong? Alternatively, is there a way to partition the drive with one partition that all three machines can see? We have a Mac G5 with 10.4 and two laptops with Windows 7. Thanks!

  Read the article

• Re-Calibrate Toshiba battery meter with Windows 7

  - by Farseeker

  Hi All. I have a Toshiba U300 laptop. Back in the olden days (circa-2000) you could re-calibrate the battery meter from the BIOS when your battery was no longer reading accurately. My battery was shot, so I bought a brand new one, however Windows 7 still seems to count down the battery life in at the same speed as the old one did. This time, when it alleged 0%, I turned the laptop back on and got another 90 minutes of life out of it, at 0%. Is there a tool or utility for Toshiba laptops that can fix it back to being accurate? I've read the other threads on SU about cycling the battery but that just doesn't seem to do it in this case. Update: After the last cycle, the battery meter now reads 100% but the indicator on the front of the laptop is still orange (indicating not fully charged)

  Read the article

• help building a PC that can image a dozen hard drives simultaneously

  - by Bigbio2002

  Not sure if this belongs on here or SuperUser, but here goes... I'm trying to figure out how to make a mass hard drive imaging PC out of COTS parts. A dedicated imaging device can do 10 drives at a time, but costs several thousand dollars. So far, I'm thinking to use several 3-port PCI-E Firewire cards, and use some kind of Firewire-to-IDE adapter to connect the drives themselves. The "software" would consist of scripting diskpart, or some other imaging utility. The problem is that I can't seem to find any sort of adapter. I could use standard external hard drive bays, but then I'd have a dozen power cables that I need to plug in. Ugly, messy, and inefficient. I picked Firewire over USB not only for better transfer speeds, but also because FW can deliver power over the bus (and could theoretically power a hard drive). Does anyone have any input on this?

  Read the article

• How to tell which physical disks have bootable MBR?

  - by Jon

  The computer I am using right now has 6 physical disks attached. Using the BIOS's "select boot device" functionality I have discovered that I can boot off 3 of these disks into the exact same bootloader. This means that all of these disks have the bootable flag set on their MBR, even though I had been under the impression that only 2 of them are in fact bootable. My question is: is there an easy way to check which disks have a bootable MBR with a command line tool or some OS utility? I am aware of the DISKPART tool and its basic functionality, but I haven't found how to view the information I need. The OS is Windows 7 x64 Ultimate with SP1.

  Read the article

• How to kill volume when headphones pulled out

  - by wonea

  I often use headphones in order to listen to music in work time. However my chair tends to occasionally have the tendency to yank the headphone cable from my laptop. Now with my Android phone this wouldn't be a problem as the music will automatically stop playing. However, Windows does not kill the volume and instead re-routes the sound to my laptop internal speaker system. Aside from turning off my laptop speakers - is there a small utility available which serves my purpose of killing the volume so my work associates aren't inflicted with erroneous musical tastes?

  Read the article

• Is it really necessary to call /bin/sync twice before an unmanaged power-off?

  - by Jeremy Friesner

  Hi all, My company sells an "embedded device" which is implemented as a headless Linux box with ext4 on an internal SSD. Some of our users have a habit of doing a "save current settings" on this box, and then cutting power to the unit as soon as the unit reports that the save completed (ie two seconds later). This was causing occasional corruption of the saved files, as the data wouldn't always get flushed to the SSD before the power went out. So I tweaked my software to run /bin/sync immediately after writing the file (after closing the file handle but before notifying the user that the save completed). This appears to fix the issue, but my coworker says that one call to /bin/sync isn't sufficient, and that to be really safe I ought to run /bin/sync twice in a row. That sounds like paranoia to me... Perhaps a habit from earlier versions of Linux or unix whose sync utility didn't work reliably. Does his advice have merit, or should one call to /bin/sync suffice?

  Read the article

• Create NTFS symbolic links from within Linux

  - by rymo

  Is there a Linux utility that can create NTFS symbolic links? That is, a link on an NTFS partition that points to another NTFS folder - one that will work within Windows 7, specifically. I wish to relocate a folder that is normally in-use while Windows is running. This machine can already dual-boot into Ubuntu, so I'd like to leverage that. EDIT: To keep this from potentially turning into "which Windows Live CD is best", I will limit this question to "Is it possible with Linux, yes or no?"

  Read the article

• CLI-Based monitoring tool for KVM

  - by Pinnacle

  I am developing a scheduler for running VMs on KVM. The scheduling has over-commitment of resources like memory and CPU. For this, I need a CLI-based monitoring tool that keeps me giving information about the resource usage of each VM, because it might be the case that due to over-provisioning of resources, VMs on a particular host are running very slowly depending on the benchmarks/programs each VM is running, and then I need to migrate a VM to another host and so on. I looked into libvirt-based tools like collects, MUNIN, Nagios-vert, etc.( http://libvirt.org/apps.html#monitoring ) I also looked into Ubuntu utility perf-kvm ( http://manpages.ubuntu.com/manpages/maverick/man1/perf-kvm.1.html ) I want to ask which CLI-based would be recommended by the community so that I can make a automated scheduler that takes care of the above situation.

  Read the article

• How to add a Mac to Windows Active Directory

  - by Ben Daniel

  I've gone into the Directory Utility on the mac, clicked on the services tab, entered the Active Directory Domain and Computer ID, clicked the Bind button and it showed a little status label which flickered through 5 of 5 steps and then said "An unknown error occurred". If I ignore the error and just click the OK button further down the screen and make sure the Active Directory service is ticked in the list of services, then go to the Directory Servers tab and try to add an Active Directory by entering my ad domain, computer id, admin username and password I get an error "Unable to add the domain. An unexpected error of type -14090 (eDSAuthFailed) occurred." Any ideas?

  Read the article

• Flash drive doesn't mount on mac

  - by Doug Harris

  I've got two different USB flash drives which are formatted MS-DOS(FAT-16). When I plug each into my MacBook Pro (running MacOS 10.6 - Snow Leopard), they don't mount. I can see them using Disk Utility. When I run an Ubuntu VM inside of VMWare Fusion, Ubuntu has no trouble mounting these either. I've tested with the drives plugged directly into the machine and plugged into a usb hub -- both give the same results. Is there a setting I've inadvertently set which disables automounting? Is there an issue with mounting FAT-16 drives?

  Read the article

• Getting error code -41 when copying files to external drive

  - by diego

  I'm having trouble copying some files from my mac to an external hard drive: I keep getting the nondescript "error code -41". I noticed some of the files with an additional "@" permission bit had the "com.apple.quarantine" flag set. I used the "xattr" command from this article What should I do about com.apple.quarantine? to take care of the quarantine flag and sort that out (these files were copied over from another mac on my network, so I guess OS X flagged them as quarantine). That took care of the problem for those files but I still have some that I can't manually copy over to the external drive. The only other thing I've noticed is that some of these files have a an extra permission bit: "drwxr-xr-x+" which I haven't been successful in googling. Aside from that I don't see anything else. Also, Disk Utility says everything's fine. Any help would be greatly appreciated.

  Read the article

• Is it possible to temporarily disable non-global zones?

  - by Gary

  I frequently need to install a package on the global zone for a quick test on a development box. When there are multiple prompts for one package I have to answer them for each zone. If the zone is not running then I need to wait for the zone to start up, answer the prompts, etc. This is particularly annoying when if I'm getting packages from http://www.sunfreeware.com and using the pkg-get utility which nicely pulls in dependencies for you. Can I disable the zones temporarily? I haven't found a way to do this. Thanks.

  Read the article

• Foremost custom file type not accepted by -t argument

  - by Channel72

  I'm trying to recover a deleted file on an ext3 file system using the foremost utility. The file I want to recover is a hpp C++ source code file. However, foremost does not automatically support the hpp file extension, so I have to add it to the config file. So, following the instructions on the man page, I add the following line to the config file: hpp n 50000 include include ASCII Then I run foremost as follows: $foremost -v -T -t hpp -i /dev/md0 -o /home/recover/ Instead of doing anything, it just displays the help message. If I change the hpp to htm or jpg, it works. So apparently foremost isn't accepting the custom file type I added into the config file. But I've looked over this dozens of times now, and I can't see what I'm doing wrong. I'm following the instructions exactly. Why doesn't foremost recognize the new file type I added to the config file?

  Read the article

• Adaptec 2020SA RAID controller Set up in RAID5, one drive went down, can I still get data?

  - by SJaguar13

  I have 6 1tb drives in a RAID5. 1 drive went down. On the RAID was 2 virtual machines that I really need back up and running. The spare drive I have to put in the server is a 1.5tb drive, which exceeds the physical per drive limit of the 2020SA. The drive is found in the disk utility, but it is not found in the array management section. I cannot add the drive to the array to have it rebuild. I have a replacement drive along with some spares on their way from Newegg, but I am still looking at a few days of downtime. Is it possible to use the 5 working drives to get the VMs copied off and on to another server or do I just have to wait for the drives to get here?

  Read the article

• How to determine main movie DVD track before ripping via mencoder

  - by Ampp3

  Maybe there's a simple answer for this, but when looking at the files on a DVD (IFOs, VOBs,etc), is there a way to easily determine the longest/main track? I'm trying to automate the process of finding the main movie track on a DVD and am running into issues. I thought this could be done by finding the BIGGEST track (look through VTS_XX_N.VOB files, where XX is the track number, and find the track with the largest filesize (sum sizes of VOB files for that track)), but apparently that isn't correct. One DVD had track 7 as the largest track (by my method), but mencoder didn't produce the correct output with this track, but worked with track 9 instead. Am I missing something? EDIT: I've heard of the utility 'lsdvd' for getting track information, but I was hoping to avoid compiling this, and use a basic method instead (ie: what I tried above). Does anyone have any idea WHY my idea didn't work?

  Read the article

• Best way to compare (diff) a full directory structure?

  - by Adam Matan

  Hi, What's the best way to compare directory structures? I have a backup utility which uses rsync. I want to tell the exact differences (in terms of file sizes and last-changed dates) between the source and the backup. Something like: Local file Remote file Compare /home/udi/1.txt (date)(size) /home/udi/1.txt (date)(size) EQUAL /home/udi/2.txt (date)(size) /home/udi/2.txt (date)(size) DIFFERENT Of course, the tool can be ready-made or an idea for a python script. Many thanks! Udi

  Read the article

• Grub os-probe showing deleted Windows installation

  - by Sanjay

  I recently purchased a Dell Vostro notebook with Ubuntu Netbook edition 10.04 pre-installed. I tried adding a partition and installed Windows XP but it didn't work out due to too many partitions in the system already. Now I have restored the laptop to factory setting using Dell Utility partition and the Windows partition is completely deleted, however my grub2 still shows Windows on /dev/sda2 sudo os-probe Microsoft Windows XP Professional (on /dev/sda2) Any ideas how to remove it from grub? I know I can remove /etc/grub.d/30_os-probe but I am more interested in why os-probe is showing the deleted partition.

  Read the article

• MPlayer refuses to generate mono wav file

  - by JCCyC

  I want to downsample an existing audio file to 8KHz mono. This command line downsamples it to stereo: mplayer -quiet -vo null -vc dummy -af volume=0,resample=8000:0:1 -ao pcm:waveheader:file="/tmp/blah1.wav" ~/from_my_cellphone.3ga It generates a file that the file utility identifies as stereo: $ file /tmp/blah1.wav /tmp/blah1.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, stereo 8000 Hz Now, if I read the documentation correctly, I should add pan=1:0.5:0.5 so I get a file that's half the size: mplayer -quiet -vo null -vc dummy -af volume=0,resample=8000:0:1:pan=1:0.5:0.5 -ao pcm:waveheader:file="/tmp/blah2.wav" ~/from_my_cellphone.3ga But it doesn't! blah2.wav is identical to blah1.wav! What am I doing wrong?

  Read the article

• Same SCSI drive appears multiple times on the controller list

  - by ohad

  Hi, I have an Adaptec AHA-2940UW SCSI adapter, to which I connected a single Atlas 10K III drive (and nothing more). When my computer loads up, the pre-OS Adaptec screen shows (I believe this is called the POST screen), where I can see the Atlas drive listed many times (i.e. with ID0, ID1, ... ID5, ID7, ID8,...,ID15 [ID6 is the adapter itself]) Using the same HD on an Adaptec AHA-2940UB the disk only shows once Since my OS hasn't been installed yet, I'm not sure if this is a problem (I would guess it is), and if so - how to solve it. Termination and multiple LUNs come mind, but the cable provides termination and I don't see why a hard drive would request multiple LUNs, especially considering it is not jumpered at all, and multuple LUN support is disabled in the Adaptec controller BIOS (via the SCSISelect utility) Thank you

  Read the article

• Can Windows 7 restore itself from image to a smaller HDD than original?

  - by Borek

  I've created a full system image using the built-in Win7 utility, it was from a 300GB drive but there is only about 50GB of data. I then swapped disks in my notebook, the new one being 80GB SSD and now when I boot to the system restore applet, go through all of the settings (finding the backed up image on a network share, confirming that I'm willing to repartition my disk etc.), I get this: The system image restore failed. No disk that can be used for recovering the system disk can be found. [Details] Is this because I'm trying to restore to a smaller disk? (Even though the data should fit without any problems, there being only 50GB of it.)

  Read the article

• After Upgrading Ubuntu to 9.10 my hard drive now has a warning.

  - by Sean

  it is a 500gb hard drive format as ext3 path /dev/sdc1 The disk utility does not even see this. This Warning is from gparted: e2label: No such device or address while trying to open /dev/sdc1 Couldn't find valid filesystem superblock. Couldn't find valid filesystem superblock. dump2fs 1.41.9 (22-Aug-2009) dumpe2fs: No such device or address while trying to open /dev/sdc1 Unable to read contents of this file system? Because of this some operations may be unavailable. END OF ERROR MESSAGE Did I lose something during the upgrade of the system? Was it the hard drive or the Ubuntu system that went bad?

  Read the article

• Time Machine (archive) of pre-Leopard systems?

  - by benc

  I want to get off an older Mac OS X system permanently. It is an iBook G3, so that has two important characteristics: Power PC, not Intel based. Runs only Tiger, not Leopard. This means, as far as I can tell: Cannot run Time Machine directly. Here's the approach I have been contemplating: Mount the drive in Firewire mode. Back up the drive as a external drive to the Time Machine volume. Disconnect the drive (permanently). However, I'm concerned that this drive will eventually age out, when the Time Machine volume fills up, and the old-system-as-external-drive is gone. Would it be better to do a single backup with another utility, to shared disk?

  Read the article

< Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >