Search Results

Search found 2346 results on 94 pages for 'dedicated'.

Page 68/94 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• Network Misconfiguration when adding first host to new vSphere cluster

  - by dunxd

  I am building a new vSphere cluster from scratch. I have installed ESXi on the first host, and built a vCenter server on a VM residing on that host (storage is on the local hard drive, although we have iSCSI targets which I can reach from the host). The cluster is configured for HA. When I try and add the host to the cluster, I get an error at the point where HA is configured - Cannot complete the . I have stripped the network configuration of the host down to the most basic - a single NIC attached to a single vSwitch - this is running the VMKernel Port on VLAN 8 - that is our Management VLAN. The vCenter server will have a network address on this VLAN, so I also set the initial Virtual Machine Port Group to this VLAN, and connected the vCenter server NIC to this port group. I understand I can't connect the vCenter server to the VMkernel port group, but shouldn't I be able to connect the vCenter server to a Port Group in the same VLAN? If not, do I need to create a VLAN specifically for VMKernel Port Group? I plan to set up another port group for vMotion with a dedicated and isolated VLAN (i.e. VLAN isn't routed) so this wouldn't allow vCenter to communicate. Does anyone have any suggestions, or other ideas for what might be causing the problem. I've read through the documentation, but it isn't giving me any pointers, and the error message isn't helping me beyond telling me something is wrong with my network config.

  Read the article

• Allowing XP Home Clients To Access Active Directory Printers

  - by Sean M

  My school's network is based on Active Directory on Windows Server 2003 servers. Most of the computers in the school are members of the domain. However, we also acquired a passel of netbooks that are running Windows XP Home (as netbooks tend to), and we're trying to make those useful. The netbooks are made available to students by check-out, so none of them are dedicated to a specific user. I only want to allow the netbooks to do two significant network activities: to access the Internet (this is working acceptably well so far), and to print to one or more printers on the network. That second one is where trouble starts. I'm trying to find a way to allow the XP Home clients to access those Active Directory printers. All the solutions that I can come up with right now are expensive, ugly, or both - for example, changing the OS on the netbooks (even with imaging, that would take a lot of my time) or making sure that the user account on each netbook has a matching account in Active Directory with permissions for printing (invites security/maintainability disaster). Are there any elegant solutions? Failing that, what's the best ugly solution for allowing my students to print from the netbooks?

  Read the article

• Update Grub on Squeeze - Kernel downgrade due VMware Server

  - by vodoo_boot

  Hi! I happen to run into various problems regarding grub and kernels. I don't really care about the kernel internas. All I want is VMware server in that dedicated root-server. 1.) What is a bzImage vs. vmlinuz? kaze:~# ls /boot/ System.map-2.6.32-5-amd64 bzImage-2.6.33.2 config-2.6.33.2 initrd.img-2.6.32-5-amd64 System.map-2.6.33.2 bzImage-2.6.35.6 config-2.6.35.6 vmlinuz-2.6.32-5-amd64 System.map-2.6.35.6 config-2.6.32-5-amd64 grub I updated my menu.lst (grub2): timeout 5 default 0 fallback 1 title 2.6.32.5 kernel (hd0,1)/boot/vmlinuz-2.6.32-5-amd64 root=/dev/sda2 panic=60 noapic acpi=off title 2.6.35.6 kernel (hd0,1)/boot//bzImage-2.6.35.6 root=/dev/sda2 panic=60 noapic acpi=off title 2.6.32.3 kernel (hd0,1)/boot//bzImage-2.6.33.2 root=/dev/sda2 panic=60 noapic acpi=off That doesn't do well... I think the vmlinuz file is missing initrd or so. Dunno. In fact I don't give too much about kernel boot voodoo as long as it works. update-grub(2) does not work. Does anybody know what magical trick there is to get the 2.6.32-5 booting? 2.) I thought t follow the Deban wiki.. I cannot get header-files for the installed 35.6 or 33.2 kernel in the repositories. I cannot build foreign headers because they will not match the running kernel. So how does one deal with that situtation? I'd prefer not to have to downgrade the kernel. Thanks for any answers!

  Read the article

• Slow performance of MySQL database on one server and fast on another one, with similar configurations

  - by Alon_A

  We have a web application that run on two servers of GoDaddy. We experince slow preformance on our production server, although it has stronger hardware then the testing one, and it is dedicated. I'll start with the configurations. Testing: CentOS Linux 5.8, Linux 2.6.18-028stab101.1 on i686 Intel(R) Xeon(R) CPU L5609 @ 1.87GHz, 8 cores 60 GB total, 6.03 GB used Apache/2.2.3 (CentOS) MySQL 5.5.21-log PHP Version 5.3.15 Production: CentOS Linux 6.2, Linux 2.6.18-028stab101.1 on x86_64 Intel(R) Xeon(R) CPU L5410 @ 2.33GHz, 8 cores 120 GB total, 2.12 GB used Apache/2.2.15 (CentOS) MySQL 5.5.27-log - MySQL Community Server (GPL) by Remi PHP Version 5.3.15 We are running the same code on both servers. The Problem We have some function that executes ~30000 PDO-exec commands. On our testing server it takes about 1.5-2 minutes to complete and our production server it can take more then 15 minutes to complete. As you can see here, from qcachegrind: Researching the problem, we've checked the live graphs on phpMyAdmin and discovered that the MySQL server on our testing server was preforming at steady level of 1000 execution statements per 2 seconds, while the slow production MySQL server was only 250 executions statements per 2 seconds and not steady at all, jumping from 0 to 250 every seconds. You can clearly see it in the graphs: Testing server: Production server: You can see here the comparison between both of the configuration of the MySQL servers.Left is the fast testing and right is the slow production. The differences are highlighted, but I cant find anything that can cause such a behavior difference, as the configs are mostly the same. Maybe you can see something that I cant see. Note that our tables are all InnoDB, so the MyISAM difference is (probably) not relevant. Maybe it is the MySQL Community Server (GPL) that is installed on the production server that can cause the slow performance? Or maybe it needs to be configured differently for 64bit ? I'm currently out of ideas...

  Read the article

• SQL 2008 SP1 crashing almost daily

  - by matijake

  Hey, almost every day our new DB crashes. It is virtual server residing on same hardware as 5 other servers, two of them beeing identical MS SQL2008sp1 and two Oracle 11g's so I can pretty much rule out hardware issues. Server has dedicated local LUN, 4vCPU and 8GB memory with 2GB windows swap file. It runs 4 instances. Primary instance is limited to 5GB memory and paralelism set to 4 running on MS SQL 2008 SP1 @ Windows Server 2008 Enterprise R2 x64. Only that primary instance is crashing. After it crashes nothing can connect to it, it's even impossible to shut it down through service manager. What I found in logs is: ***Stack Dump being sent to C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\LOG\SQLDump0081.txt SqlDumpExceptionHandler: Process 4788 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server i s terminating this process.     Whole log can be seen at: http://kabl.org/files/SQLDump0081.txt second crash log made second later at: http://kabl.org/files/SQLDump0082.txt I have analyzed mini crashdump with Microsoft tools, but no promising results. If it can help, here it is: http://kabl.org/files/SQLDump0081.mdmp Any ideas are greatly welcome, since it is becoming quite a pain in the ass to restart server almost every day :) Regrads, -Matija

  Read the article

• IIS permission configuration issue

  - by Dan

  Sorry the title of this question is a little ambiguous but I don't really have any idea where the issue lies - I'm seeking some clarification of the server error logs. Basically, I had a dedicated server running Windows 2003 and Plesk (v8 I think). Last week the server hardware failed and the entire thing had to be rebuilt from scratch. New hardware was put in, new operating system (Win2008), new Plesk installation (v9.5), new software (MSSQL etc) then all data ported over manually from old C and D drives to restore all 30 client sites. It was hell! All has been okay for a couple of days now but about an hour ago POP! Suddenly all sites went down giving a 500 error. Restarting all services eventually brought everything back online, but I'm now living in total fear. It can - and probably will - happen again. The guys on support gave me the following errors from the server log: The Template Persistent Cache initialization failed for Application Pool 'ASP.NET v4.0 Classic' because of the following error: Could not create a Disk Cache Sub-directory for the Application Pool. The data may have additional error codes.. The worker process for application pool 'domain1.com(domain)(2.0)(pool)' encountered an error 'Cannot read configuration file ' trying to read configuration data from file '\\?\C:\inetpub\temp\apppools\domain1.com(domain)(2.0)(pool).config', line number '0'. The data field contains the error code. The worker process for application pool 'PleskControlPanel' encountered an error 'Cannot read configuration file ' trying to read configuration data from file '\\?\C:\inetpub\temp\apppools\PleskControlPanel.config', line number '0'. The data field contains the error code. The support guys are so ambiguous about this and it scares me horribly. Can anyone positively identify the cause of this error which lead to all client website going offline? What can be done to prevent it from happening again? Any pointers would be very much appreciated! Thanks folks...

  Read the article

• Can I use a single SSLCertificateFile for all my VirtualHosts instead of creating one of it for each VirtualHost?

  - by user65567

  I have many Apache VirtualHosts for each of which I use a dedicated SSLCertificateFile. This is an configuration example of a VirtualHost: <VirtualHost *:443> ServerName subdomain.domain.localhost DocumentRoot "/Users/<my_user_name>/Sites/users/public" RackEnv development <Directory "/Users/<my_user_name>/Sites/users/publ`enter code here`ic"> Order allow,deny Allow from all </Directory> # SSL Configuration SSLEngine on #Self Signed certificates SSLCertificateFile /private/etc/apache2/ssl/server.crt SSLCertificateKeyFile /private/etc/apache2/ssl/server.key SSLCertificateChainFile /private/etc/apache2/ssl/ca.crt </VirtualHost> Since I am maintaining more Ruby on Rails applications using Passenger Preference Pane, this is a part of the apache2 httpd.conf file: <IfModule passenger_module> NameVirtualHost *:80 <VirtualHost *:80> ServerName _default_ </VirtualHost> Include /private/etc/apache2/passenger_pane_vhosts/*.conf </IfModule> Can I use a single SSLCertificateFile for all my VirtualHosts (I have heard of wildcards) instead of creating one of it for each VirtualHost? If so, how can I change the files listed above?

  Read the article

• Optimize apache for 10K+ wordpress views a day on 2GB RAM E6500 CPU

  - by Broke artist

  I have a dedicated server with apache/php on ubuntu serving my Wordpress blog with about 10K+ pageviews a day. I have W3TC plug in installed with APC. But every now and then server stop responding or goes dead slow and i have to restart apache to get it back. Heres my config what am i doing wrong? ServerRoot "/etc/apache2" LockFile /var/lock/apache2/accept.lock PidFile ${APACHE_PID_FILE} TimeOut 40 KeepAlive on MaxKeepAliveRequests 200 KeepAliveTimeout 2 StartServers 5 MinSpareServers 5 MaxSpareServers 8 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 1000 StartServers 3 MinSpareServers 3 MaxSpareServers 3 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 1000 StartServers 3 MinSpareServers 3 MaxSpareServers 3 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 1000 User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} AccessFileName .htaccess Order allow,deny Deny from all Satisfy all DefaultType text/plain HostnameLookups Off ErrorLog /var/log/apache2/error.log LogLevel error Include /etc/apache2/mods-enabled/.load Include /etc/apache2/mods-enabled/.conf Include /etc/apache2/httpd.conf Include /etc/apache2/ports.conf LogFormat "%v:%p %h %l %u %t \"%r\" %s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %s %O" common LogFormat "%{Referer}i - %U" referer LogFormat "%{User-agent}i" agent CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined Include /etc/apache2/conf.d/ Include /etc/apache2/sites-enabled/

  Read the article

• Suspected brute force attack

  - by HarveySaayman

  Recently I acquired a dedicated server from a local ISP to play around with. As the tags suggest, its a windows server 2008 R2 machine. I've only had it for a few days, and no real traffic is going to it yet. I haven't even deployed a "real" website to it yet. Just a silly page so that I could check IIS, my host headers, DNS records, etc are all configured correctly. While playing around, I noticed a ton of Audit Failure entries in the event viewers security logs. It seems something is trying to access the administrator account, and failing. It smells like a brute force attack to me. My ISP gave me the account details of the administrator account and I used those to RDP into the box, which I've heard is not the securest of situations. I created myself another account and added myself to the administrator group, so im using that account to gain acceess to the machine now. In response to all of this i used http://strongpasswordgenerator.com/ to generate me some 20 character length strong passwords and changed all of my account passwords, even the SQL sa user. I also enabled the auto ban feature of FileZillaServer (my FTP server) My questions: 1) how can i detect this kind of thing better? 2) how can i protect my server from unauthorized access better? PS: I'm a software dev, not a sysadmin so please mind my server security idiot-ness-ness

  Read the article

• Postfix mail forwarder

  - by Andrew

  Hello, I just bought a dedicated server and I'm trying to install a webserver on it. The server is Ubuntu 10.04. I installed ftp, nginx, php, mysql, bind and now I have to install mail server. For the mail server I'm using Postfix, because it's recomended on ubuntu. I installed Postfix with apt-get install postfix but mail() function from php wasn't working. After a little debug I found the way to solve this : I created an empty file /etc/postfix/main.cf and it worked good. I do have a mx record like this mail 5M IN A xxx.xxx.xxx.xxx example.com. 5M IN MX 1 mail.example.com. After that I wanted to forward all e-mails to my GMail address. So I googled for it and I found in the official docs Virtual Domain Host Forwarding I added these lines in main.cf virtual_alias_domains = example.com virtual_alias_maps = hash:/etc/postfix/virtual I created map file and I placed this line in it @example.com [email protected] I run in terminal postmap /etc/postfix/virtual postfix reload The result: I can send e-mail from php with mail() function, but when I send an email to [email protected] that e-mail isn't forwarded to my Gmail. How to solve this? -Andrew I also tried this but not working http://rackerhacker.com/2006/12/26/postfix-virtual-mailboxes-forwarding-externally/ It works now! But I don't know what the problem was. I just installed "Mail Server" from Tasksel and after that it worked fine. Can anyone tell me what Tasksel installed or that it changed ?

  Read the article

• OpenVZ Can't initialize containers after install

  - by Tonino Jankov

  I have installed OpenVZ on centos 6 on a dedicated server. I followed quick installation guide on openvz wiki. After installing thru yum, I don't know why, but grub.conf wasn't automatically updated to accomodate new kernel, so I had to do it manually. I edited grub.conf, added openvz kernel and rebooted - it went fine. Server went up into openvz kernel and it worked, it started openvz service byitself. But after I created a container, added IP to it and attempted to start it, I couldn't. Here is the output from the shell: [root@cloud2 ~]# vzctl start 86 Starting container ... Container is mounted Container start failed (try to check kernel messages, e.g. "dmesg | tail") Container is unmounted [root@cloud2 ~]# dmesg | tail [ 1973.401596] CT: 86: failed to start with err=-105 [ 2107.113850] Failed to initialize the ICMP6 control socket (err -105). [ 2107.155523] CT: 86: stopped [ 2107.155543] CT: 86: failed to start with err=-105 [ 6348.282184] Failed to initialize the ICMP6 control socket (err -105). [ 6348.330348] CT: 86: stopped [ 6348.330361] CT: 86: failed to start with err=-105 [45184.024002] Failed to initialize the ICMP6 control socket (err -105). [45184.072086] CT: 86: stopped [45184.072099] CT: 86: failed to start with err=-105 [root@cloud2 ~]# I don't know what is wrong. I tried different templates, debian 6, centos 6, i386, amd64, but the issue is the same. What is the problem?

  Read the article

• Apache crashes every 5min

  - by Simon

  I'm relatively new to server issues, having a site of mine that I started early in the year grow beyond my capabilities of managing it. I need help. I recently moved out of my shared hosting environment onto a dedicated virtual server from Mediatemple. Each week, I run a script that fetches data from my DB, fetches data from last.fm's API and then tweets information to Twitter. My server uses Virtuozzo and when the script runs, Apache crashes every 5min. I checked and saw that the 'kmemsize' parameter reaches its cap (its 13mb). I realise my problem. The MySQL process stays open for long while Apache needs to handle lots of incoming links (about 200 000 pageviews for that day according to my previous host's AWSTATS). Yes, I'm quite unexperienced in this, and I'm clearly killing the server with too many incoming links while it has to manage the updating of the DB. So that is the precedent: I want a few answers. 1) Why did my shared hosting environment not crash apache every 5min? It ran fine, the site only slowed a lot. Clearly, it must be the virtual container and the kmemsize limit? 2) Where do I go from here? Would a physical server (not a virtual container) encounter the same problems? I sent a support request to Mediatemple as well. I need all the help I can get.

  Read the article

• How to set up GRUB2 chainloader to other Grub (Fedora, Debian) on GPT

  - by basic6

  I'm trying to set up a dedicated GRUB2 which (chain-)loads another GRUB on a disk with GPT partition table. Relevant partitions: /dev/sda1 BIOS_BOOT /dev/sda2 BOOT (ext2) /dev/sda3 FEDORA (ext4) /dev/sda6 DEBIAN (ext4) I installed Fedora first, using /dev/sda2 as boot partition. Then I installed Debian. The Debian installer recognized the Fedora installation and added it as boot entry, then installed its GRUB into the MBR. While this works for the moment, it's pretty messy, because every Debian update may change the boot config, removing the Fedora entry (tried it) and the other way around. That's why I want both systems to have their own boot loader and one main boot loader (that could reside on /dev/sda2), which loads one of them. This is what I've tried: Moved everything from /dev/sda2 to /dev/sda3/boot Removed /boot mount point in Fedora (so /dev/sda2 isn't used anymore) From a live Linux, installed GRUB2 to the MBR (grub-install --boot-directory=sda2 /dev/sda) Wrote a menu.lst: title Fedora root (hd0,2) chainloader +1 (Again, for Debian) Converted that to a grub.cfg script (grub-menu2cfg or something like that) When booting, actually got a GRUB2 menu with "Fedora" (and "Debian") When selecting any one of those: error: invalid signature Issued "grub-install /dev/sda6" (and ...sda3) from all kinds of live Linux systems, all of which failed with another error message (in the case of the Debian installer, without explanation at all) Added --force to the chainloader line, now it says "loading", then reboots Found douzens of howtos, none of which seem to work for me Since I get the self-made GRUB2 menu on bootup, I've at least successfully installed the first stage of GRUB, right? When trying to chainload, some signature is checked and seems to be wrong - how do I fix it? The boot menus (Fedora with its different Kernel versions and Debian with Debian and Fedora as well) are now on the system partitions (/dev/sda3, /dev/sda6), is there anything else to do on these partitions, so they can be chainloaded? Any help is greatly appreciated.

  Read the article

• Setting up WHM nameservers

  - by Miskone

  I am new to server administration and I've just got a dedicated root server from Hetzner. First I set up in Hetzner's robot DNS entries Registered nameservers: ns1.raybear.com 88.198.32.57 ns2.raybear.com 88.198.32.57 Under DNS entires I have buzz-buzz.me pointing to 88.198.32.57 // My server IP address and on my WHM I have DNS zone for buzz-buzz.me ; cPanel first:11.42.1.17 (update_time):1402062640 Cpanel::ZoneFile::VERSION:1.3 hostname:hosting.raybear.com latest:11.42.1.17 ; Zone file for buzz-buzz.me $TTL 14400 buzz-buzz.me. 86400 IN SOA ns1.raybear.com. miskone.gmail.com. ( 2014060605 ;Serial Number 86400 ;refresh 7200 ;retry 3600000 ;expire 86400 ) buzz-buzz.me. 86400 IN NS ns1.raybear.com. buzz-buzz.me. 86400 IN NS ns2.raybear.com. buzz-buzz.me. 14400 IN A 88.198.32.57 localhost 14400 IN A 127.0.0.1 buzz-buzz.me. 14400 IN MX 0 buzz-buzz.me. mail 14400 IN CNAME buzz-buzz.me. www 14400 IN CNAME buzz-buzz.me. ftp 14400 IN CNAME buzz-buzz.me. agent 14400 IN A 88.198.32.57 src 14400 IN A 88.198.32.57 platform 14400 IN A 88.198.32.57 But still I have some problems accesing buzz-buzz.me, agent.buzz-buzz.me and platform.buzz-buzz.me Also I have problem getting mails on Google account, I can send but not receive emails. How to solve this. As I said I am completly new here and I need urgent help.:(

  Read the article

• Wastage of resources in Virtualization

  - by Sabeen Malik

  I have asked this question on SO, but was suggested that i ask it here on SF, so here it goes. http://stackoverflow.com/questions/3010753/wastage-of-resources-in-virtualization I am not sure if this is the right place to ask the question. However i hope it is. When looking for a VPS earlier today, I was trying to understand how each container would work in the background. Keeping in mind the fact that the operating system uses most of the memory and power on a system, wouldn't having multiple operating systems in the same machine mean more wastage of resources. For instance if i was running centOS on a dedicated box and it was running lets say 20 background OS level processes. Then i go and install a virtualization platform and install 5 more centOS virtual machines in the same system which are exactly the same as the host operating system. Doesn't this mean duplication of those 20 processes 6 times? So internally the context switching is happening between 120 processes instead of 20? Further Notes: Here is an example of what i am thinking: I have a master-slave configuration for a long running, cpu + memory intensive process, which can be distributed to 4 machines. Lets say when the process runs on these 4 machines with lets say 1 Gh CPU and 1 Gig RAM, i get 400 results per hour from the cluster (assuming 100 results from one machine) . Now i get a bigger machine ( lets say 4Gh and 4 Gig RAM), have 4 virtual hosts on it with 1 Gz CPU and 1 Gig RAM. Will this configuration give me the same 4 results per hour from these 4 virtual hosts?

  Read the article

• Looking to replace Ghost with FSArchiver or Clonezilla, few questions about capabilities

  - by Daniel Wright

  I work for a PC Repair company and we are looking into setting up a dedicated machine with externally accessible SATA bays to clone harddrives as a safety net incase something goes wrong during a repair. We currently use a SATA/PATA to USB bridge called MagicBridge and Norton Ghost on any workstation, but we're looking to move away from Ghost. We have a computer with a large RAID5 array with Windows Server 2008 Standard currently installed, but this can be replaced with a flavour of *nix. I have some experience with Clonezilla, but FSArchiver also seems like a suitable replacment too. My Head Technician wants to know if my chosen solution (probably Clonezilla or FSArchiver, but I'm open to free suggestions) is capable of: Cloning a degraded RAID, such as a single drive from a RAID1 mirror without complaining Producing images that are easily mountable (he'd prefer them to be mountable in Windows, but if there is no other easy way, *nix should be fine) akin to Ghost Explorer so individual files can be restored as well as being able to do bare metal restores. My apologies for wordiness but I wanted to be thorough in my explaination. Thanks for any suggestions or tips :) EDIT: I've just found out that Clonezilla has a workaround for cloning RADI1 drives EDIT2: Found the answer to both of my questions, aparently I wasn't phrasing my searches right, could this question be deleted please?

  Read the article

• How to disable mod_security2 rule (false positive) for one domain on centos 5

  - by nicholas.alipaz

  Hi I have mod_security enabled on a centos5 server and one of the rules is keeping a user from posting some text on a form. The text is legitimate but it has the words 'create' and an html <table> tag later in it so it is causing a false positive. The error I am receiving is below: [Sun Apr 25 20:36:53 2010] [error] [client 76.171.171.xxx] ModSecurity: Access denied with code 500 (phase 2). Pattern match "((alter|create|drop)[[:space:]]+(column|database|procedure|table)|delete[[:space:]]+from|update.+set.+=)" at ARGS:body. [file "/usr/local/apache/conf/modsec2.user.conf"] [line "352"] [id "300015"] [rev "1"] [msg "Generic SQL injection protection"] [severity "CRITICAL"] [hostname "www.mysite.com"] [uri "/node/181/edit"] [unique_id "@TaVDEWnlusAABQv9@oAAAAD"] and here is /usr/local/apache/conf/modsec2.user.conf (line 352) #Generic SQL sigs SecRule ARGS "((alter|create|drop)[[:space:]]+(column|database|procedure|table)|delete[[:space:]]+from|update.+set.+=)" "id:1,rev:1,severity:2,msg:'Generic SQL injection protection'" The questions I have are: What should I do to "whitelist" or allow this rule to get through? What file do I create and where? How should I alter this rule? Can I set it to only be allowed for the one domain, since it is the only one having the issue on this dedicated server or is there a better way to exclude table tags perhaps? Thanks guys

  Read the article

• Using virtualization infrastructure for J2EE application distribution- viable alternative?

  - by Dan

  Our company builds custom J2EE web solutions. At the moment, we use standard J2EE distribution mechanisms (ear/war archives). Application servers are generally administered by our clients' IT departments and since we do not have complete control over the environment, a lot of entropy can be introduced into the solution. For example: latest app. server patch not applied conflicting third party libraries inside the app. server root server runtime and tuning parameters not configured (for example, number of connections in database pool) We are looking into using virtualization infrastructure for J2EE application distribution. Instead of sending the ear/war archive, we’d send image with application server node and our application preinstalled. Some of the benefits are same as using with using virtualization infrastructure in general, namely better use of hardware resources. For us, it reduces the entropy of hosting infrastructure - distributing VM should be less affected by hosting environment. So far, the downside I see can be in application server licenses, here they will have to use dedicated servers for our solution, but this is generally already done that way. Also, there is a complexity with maintaining virtualization infrastructure, but this is often something IT departments have more experience with than with administering and fine-tuning J2EE solutions. Anyone has experience with this model? What are the downsides? Will we not just replace one type of complexity with other?

  Read the article

• Setup Exchange 2010 cannot verify Host (A) record warning

  - by Joost Verdaasdonk

  When I try to install Exchange 2010 on my server 2008 R2 server I get a warning during the prerequisites check: Warning: setup cannot verify that the 'Host' (A) record for this computer exists within the DNS database on server: 90.195.200.12. The goal of this Exchange setup is that I'm able to sent email in my local domain as well receive/sent email through the public domain name. Some information about my setup This Server is going to be a dedicated exchange host and has the following IP setup: (IP's are examples and not the real IP's ofc) Local VLAN NIC: IP: 10.10.50.22 Subnet: 255.255.255.0 No gateway DNS: 10.10.50.1 (is domain controler with authoritive DNS) public WAN NIC: IP: 90.195.200.148 Subnet: 255.255.255.235 Gateway: 90.195.200.145 DNS: 90.195.200.12 | 190.160.230.14 My public domain - exampledomain.com A record: mail - IP: 90.195.200.148 MX record IP: 90.195.200.148 As I'm seeing now the exchange setup is looking for the A record in one of the DNS servers in my Public WAN NIC. And ofc this is not where my A records are defined. I have those A records in 2 places: 1. In the domain controler DNS (the private nic) 2. In the online dns registration of my public domain (exampledomain.com) My question is... is this warning going to be a problem? Can I do something better in my setup so that this warning will go away? Please advice?

  Read the article

• How to best tune my SAN/Initiators for best performance?

  - by Disco

  Recent owner of a Dell PowerVault MD3600i i'm experiencing some weird results. I have a dedicated 24x 10GbE Switch (PowerConnect 8024), setup to jumbo frames 9K. The MD3600 has 2 RAID controllers, each has 2x 10GbE ethernet nics. There's nothing else on the switch; one VLAN for SAN traffic. Here's my multipath.conf defaults { udev_dir /dev polling_interval 5 selector "round-robin 0" path_grouping_policy multibus getuid_callout "/sbin/scsi_id -g -u -s /block/%n" prio_callout none path_checker readsector0 rr_min_io 100 max_fds 8192 rr_weight priorities failback immediate no_path_retry fail user_friendly_names yes # prio rdac } blacklist { device { vendor "*" product "Universal Xport" } # devnode "^sd[a-z]" } devices { device { vendor "DELL" product "MD36xxi" path_grouping_policy group_by_prio prio rdac # polling_interval 5 path_checker rdac path_selector "round-robin 0" hardware_handler "1 rdac" failback immediate features "2 pg_init_retries 50" no_path_retry 30 rr_min_io 100 prio_callout "/sbin/mpath_prio_rdac /dev/%n" } } And iscsid.conf : node.startup = automatic node.session.timeo.replacement_timeout = 15 node.conn[0].timeo.login_timeout = 15 node.conn[0].timeo.logout_timeout = 15 node.conn[0].timeo.noop_out_interval = 5 node.conn[0].timeo.noop_out_timeout = 10 node.session.iscsi.InitialR2T = No node.session.iscsi.ImmediateData = Yes node.session.iscsi.FirstBurstLength = 262144 node.session.iscsi.MaxBurstLength = 16776192 node.conn[0].iscsi.MaxRecvDataSegmentLength = 262144 After my tests; i can barely come to 200 Mb/s read/write. Should I expect more than that ? Providing it has dual 10 GbE my thoughts where to come around the 400 Mb/s. Any ideas ? Guidelines ? Troubleshooting tips ?

  Read the article

• Server 2012, Jumbo Frames - should I expect problems?

  - by TomTom

  Ok, this sound might stupid - but is there any negative on just enabling jumbo frames in practice? From what I understand: Any switch or ethernet adapter that sees a jumbo frame it can not handle will just drop it. TCP is not a problem as max frame size is negotiated in the setinuo phase. UCP is a theoretical problem as a server may just send a LARGE UDP packet that gets dropped on the way. Practically though, as UDP is packet based, I do not really think any software WOULD send a UDP packet larger than 1500 bytes net without app level configuration changes - at least this is how I do my programming, as it is quite hard to get a decent MTU size for that without testing yourself, so you fall back in programming to max 1500 packets. The network in question is a standard small business network - we upgraded now from a non managed 24 port switch to a 52 port switch with 4 10g ports (netgear - quite cheap) and will mov a file server to 10g for also ISCSI serving. All my equipment on the Ethernet level can handle minimum 9000 bytes and due to local firewalls I really want to get packets larger (less firewall processing), but the network is also NAT'ed to the internet. On top, different machines move around (download) large files (multi gigabyte area) quite often for processing. The question is - can I expect problems when I just enable jumbo frames? Again, this is not totally ignorance - I just don't see programs sending more than 1500 byte UDP packets (if that is a practical problem please tell me) and for TCP the MTU is negotiated anyway. if there is a problem I can move to a dedicated VLAN, but this has it's own shares of problems as basically most workstations must then be on both VLAN's.

  Read the article

• Cheap desktop computer in 19" rack-mountable form-factor?

  - by Alex Basson

  I'm a high school teacher at a small private school. As of this year, we have SMARTBoards in every classroom (though I've had one in the class I share for two years now). The classrooms themselves don't have computers in them, so we teachers bring our laptops to class and connect them to the boards. This has several disadvantages: This takes a few minutes while we wait for the board to boot up and then orient the board to our individual laptop -- we have to do this every time b/c different teachers have different laptops requiring different orientations. This isn't ideal because when you only have 43 minutes per class period, waiting five minutes just to get started is a real waste. Carrying your laptop to class doesn't sound so bad until you consider that we're also carrying textbooks and piles of student papers, and we're carrying it all through crowded high school hallways. More than one laptop has fallen THUNK to the floor, with dire consequences. We feel we could eliminate the need to use our laptops with the SMARTBoards if we had a dedicated computer in each classroom hooked up to the board at all times. Each board set-up is connected to a podium with a standard 19" rack in it, currently housing a power supply and DVD player. There're plenty of rack spaces available. So I'm thinking: maybe we could get some inexpensive computers in a 19" rack-mountable form factor, install them in the podiums, and connect them to the boards on a permanent basis. Any suggestions?

  Read the article

• Cannot connect to windows server by name over vpn connection

  - by ErocM

  I have a rented dedicated windows server on a public ip that is acting as a SQL Server and VPN server. I need to connect to this server via computer name to get replication in place. I cannot use an ip address due to this issue: So, due to this, we are going the VPN route. That is my primary issue: After I am connected to this server's vpn, I can connect to SQL Server using the ip address but I cannot connect by the computer's name as you can see below... Right now, there is no hardware firewall on it since I had it removed to test this issue. I am running Windows 2008 Enterprise Server as the VPN server. I am not sure if the route print will help any from the workstation trying to connect but here is the info: IPv4 Route Table Active Routes: Network Destination Netmask Gateway Interface Metric 10.0.0.0 255.0.0.0 10.0.0.1 10.0.0.2 21 10.0.0.2 255.255.255.255 On-link 10.0.0.2 276 Any other info needed? Thanks for the help! ========= CLARIFICATION ON A FEW THINGS #1 ========= This is the server's info: This is the workstation that is trying to connect: I connect to the server via "Control Panel\Network and Internet\Network and Sharing Center\Connect or Disconnect" You can see here that I am connected: ========= CLARIFICATION ON A FEW THINGS #2 ========= I've tried to connect directly to the Sql Server as I did above but with the computers name and I couldn't get to it. Here I am trying to net view it from the workstation and it couldn't find it:

  Read the article

• ISA 2000 and COD MW2 Steam

  - by twlichty

  OK, so maybe not the "proper use" of network resources, but we enjoy the odd COD game during lunch hours. When we played COD4, we had a dedicated server setup at the back of the server room. With MW2, we need to be able to connect to steam to be able to play multi-player. I've found this support article here: https://support.steampowered.com/kb%5Farticle.php?ref=8571-GLVN-8711 Which outlines all the ports I need to open. I went through and created the following rules in ISA 2000 (I'm stuck with 2000 for now). Protocol Definition: Steam Primary connection: Port 27000, UDP, Send Receive Secondary Connection: Port range 27001-27030 Send Receive Protocol Definition: Steam TCP In Primary connection: 27014, TCP, Inbound Secondary Connection: Port range: 27015-27050, Inbound Protocol Definition: Steam 4380 Primary connection: 4380, UDP, Send Receive When I start steam on my local workstation (I did add an exception to the Vista Firewall to allow steam), the steam client sits on "Updating Steam" for 5 minutes then errors out with: You must connect to the internet first. Any ideas? I assume I missed something. Thanks for your help.

  Read the article

• nginx config woes for multiple subdomains & domains

  - by Peter Hanneman

  I'm finally moving away from Apache and I've got the latest development version of nginx running on a fully updated Ubuntu 10.04 VPS. I've got a single dedicated IP for the box (1.2.3.4) but I've got two separate domains pointing to the server: www.example1.com and www.example2.net. I would like to map the fallowing relationships between urls and document roots in the config: www.example1.com / example1.com -> /var/www/pub/example1.com/ subdomain.example1.com -> /var/www/dev/subdomain/example1.com/ www.example2.net / example2.net -> /var/www/pub/example2.net/ subdomain.example2.net -> /var/www/dev/subdomain/example2.net/ Where the name of the requested subdomain is a folder under /var/www/dev/. Ideally a request for a non-existent subdomain(no matching folder found) would result in a rewrite to the public site (eg: invalid.example1.com -- www.example1.com) however a mere "404 Not Found" wouldn't be the worst thing in the world. It would also be nice if I didn't need to modify the config every time I mkdir a new subdomain folder - even better if I don't need to edit it for a new domain either...but now I'm getting greedy... :p Although in my defense Apache did all of this with a single directive. Does anyone know how I can efficiently mimic this behavior in nginx? Thanks in advance, Peter Hanneman

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >