Search Results

Search found 18046 results on 722 pages for 'custom component'.

Page 692/722 | < Previous Page | 688 689 690 691 692 693 694 695 696 697 698 699 | Next Page >

JBoss https on port other than 8080 not working

- by MilindaD

We have a server with two JBoss instances where one runs on 8080, the other on 8081. We need to have HTTPS enabled for the 8081 server, firstly we tried enabling https on the 8080 port instance by generating the keystore and editing the server.xml and it successfully worked. However when we tried the same thing for 8081 it did not, note that we removed https for the 8080 server first before enabling it for 8081. This is what was used for both server.xml for 8080 and 8081. The only difference was that the port was changed from 8080 to 8081 when trying to enable https for 8081 port instance. What am I doing wrong and what needs to be changed? NOTE : When I meant enabled for 8080 I meant when you visit https:// URL:8484 you will actually be visiting the 8080 port instance. However when ssl is enabled for 8081 and I visit https:// URL:8484 I get that the web page is unavailable. COMMENTLESS VERSION <Server> <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> <Listener className="org.apache.catalina.core.JasperListener" /> <Service name="jboss.web">  <Connector port="8080" address="${jboss.bind.address}" maxThreads="350" maxHttpHeaderSize="8192" emptySessionPath="true" protocol="HTTP/1.1" enableLookups="false" redirectPort="8443" acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" compression="on" ompressableMimeType="text/html,text/css,text/javascript,application/json,text/xml,text/plain,application/x-javascript,application/javascript"/> <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" address="${jboss.bind.address}" keystoreFile="${jboss.server.home.dir}/conf/supun1.keystore" keystorePass="aaaaaa" truststoreFile="${jboss.server.home.dir}/conf/supun1.keystore" truststorePass="aaaaaa" />  <Connector port="8009" address="${jboss.bind.address}" protocol="AJP/1.3" emptySessionPath="true" enableLookups="false" redirectPort="8443" /> <Engine name="jboss.web" defaultHost="localhost" jvmRoute="khms1"> <Realm className="org.jboss.web.tomcat.security.JBossSecurityMgrRealm" certificatePrincipal="org.jboss.security.auth.certs.SubjectDNMapping" allRolesMode="authOnly" /> <Host name="localhost" autoDeploy="false" deployOnStartup="false" deployXML="false" configClass="org.jboss.web.tomcat.security.config.JBossContextConfig" > <Valve className="org.jboss.web.tomcat.service.sso.ClusteredSingleSignOn" /> <Valve className="org.jboss.web.tomcat.service.jca.CachedConnectionValve" cachedConnectionManagerObjectName="jboss.jca:service=CachedConnectionManager" transactionManagerObjectName="jboss:service=TransactionManager" /> </Host> </Engine> </Service> </Server> WITH COMMENTS VERSION <Server>  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Service name="jboss.web">  <Connector port="8080" address="${jboss.bind.address}" maxThreads="350" maxHttpHeaderSize="8192" emptySessionPath="true" protocol="HTTP/1.1" enableLookups="false" redirectPort="8443" acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" compression="on" ompressableMimeType="text/html,text/css,text/javascript,application/json,text/xml,text/plain,application/x-javascript,application/javascript"/>   <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" address="${jboss.bind.address}" keystoreFile="${jboss.server.home.dir}/conf/supun1.keystore" keystorePass="aaaaaa" truststoreFile="${jboss.server.home.dir}/conf/supun1.keystore" truststorePass="aaaaaa" />  <Connector port="8009" address="${jboss.bind.address}" protocol="AJP/1.3" emptySessionPath="true" enableLookups="false" redirectPort="8443" /> <Engine name="jboss.web" defaultHost="localhost" jvmRoute="khms1">  <Realm className="org.jboss.web.tomcat.security.JBossSecurityMgrRealm" certificatePrincipal="org.jboss.security.auth.certs.SubjectDNMapping" allRolesMode="authOnly" />  <Host name="localhost" autoDeploy="false" deployOnStartup="false" deployXML="false" configClass="org.jboss.web.tomcat.security.config.JBossContextConfig" >        <Valve className="org.jboss.web.tomcat.service.sso.ClusteredSingleSignOn" />  <Valve className="org.jboss.web.tomcat.service.jca.CachedConnectionValve" cachedConnectionManagerObjectName="jboss.jca:service=CachedConnectionManager" transactionManagerObjectName="jboss:service=TransactionManager" /> </Host> </Engine> </Service> </Server>

Read the article
USB connection is unstable with Nexus S 2.3.4 on AMD 64 running 64-bit Windows 7, but works with 32-bit Windows Vista

- by Mike

The USB connection is unstable with Nexus S (Android 2.3.4) on AMD 64 running 64-bit Windows 7, but it works with 32-bit Windows Vista. Problem Description: On the 64-bit Windows 7 machine my Nexus S appears to connect, but then it disconnects moments later. Neither accessing USB storage or loading an Android application package file (APK) using the Android Debug Bridge (ADB) work. On 32-bit Windows Vista using the same USB cable, USB storage works. I haven't tried the ADB on 32-bit Windows Vista. Reproduction steps for USB storage: (I have provided the reproduction steps for USB storage and not ADB, because if one isn't working, then the other isn't working either and the USB storage reproduction steps are shorter to document.) Connect the USB cable to the Nexus S and my Windows 7 machine. Effect: The "USB Mass Storage, USB Connected" dialog appears with the button "Turn on USB storage." Click "Turn on USB Storage" Effect: The "working circle" appears. A dialog briefly appears saying "USB storage in use," then it either returns me to Step 1 (now that I am running 2.3.4) or is replaced with the Nexus S's application homepage (while I was running 2.3.3). I'm not sure if the version matters, but I mention it for completeness. On the 32-bit Windows Vista machine the connection is stable. I am able to navigate through the Nexus S file system create, read, update, and delete files, etc. I haven't tried connecting with the ADB. Troubleshooting summary: Tried and failed: Uninstalling and reinstalling the Android USB drivers including removing the files. Uninstalling my custom software Pulling the Nexus S's battery Restarting the Nexus S Restarting 64-bit Windows 7 Changing USB ports on the 64-bit Windows 7 box Compared the dates and file size on the DLLs in my google-usb_driver\amd64 directory and the windows\System32 directory. They match. The sizes for the google-usb_driver\i386 directory do not match (expected). Turning off Debugging mode on the Nexus S does not resolve the problem. Searching Google. Tried and succeeded: Connecting to another machine (Windows Vista) using the same USB cable and Nexus S phone. Troubleshooting observations: I notice that uninstalling the device drivers and deleting the files, then reinstalling the drivers, then rebooting 64-bit Windows 7 then unplugging the Nexus S, then plugging it back in occasionally helps for a short amount of time (minutes to hours, not days). When it is working, I can both access the Nexus S's drive and load/test applications using the ADB. I have observed some wonky behavior in the Device Manager that I haven't tracked down. Sometimes the black Nexus S image appears in the list of devices. Sometimes the image displays as a computer with a green ISA card. Sometimes it neither appears on the top level of devices nor under “other devices,” but it does appear under "disk drives" as "Android UMS Composite USB Device." System configuration: The Nexus S is running Android OS 2.3.4's "Settings\about phone\System updates" indicates that it is up to date as of May 21st 2011. Both 32-bit Windows Vista and 64-bit Windows 7 are up to date. The Windows Vista system is running on an Intel 32-bit processor. Windows 7 is running on an AMD 64-bit processor. I have done Android development on both systems, but I usually develop on the 64-bit Windows 7 machine.

Read the article
Linux: Apple Wireless A1314 Fn key not registered, looks like software bug

- by ramplank

I'm trying to set up my Apple Wireless Keyboard with my Kubuntu systems. These are PC hardware powered by Intel Atom and Intel i5 respectively. The keyboard has a US keyboard layout and has model number A1314 written on the back. It takes two AA batteries. I'm saying that because it appears there are multiple types of model A1314. I have tried this on a 10.04, 11.04, 11.10 and 12.04 system with no success. Every time using a bluetooth dongle and the KDE bluetooth notification tray applet, the keyboard can be connected. In both cases it shows up as "Apple Wireless Keyboard". Almost everything works as expected, in fact, I'm typing on it right now. But one thing doesn't: The Fn key. I'd like to use Fn + Down Arrow as PgDn / Page Down, I understand this is default behaviour on Apple keyboards. And of course I'd like the same for Page Up, Home and End. I'll stick to Page Down in my example. I used the xev tool to see the keycodes the system receives, and if I press on Fn nothing happens, and nothing is registered. If I press Fn + Down Arrow, xev only registers the down arrow. Here's the output from my 11.04 system to illustrate: Press just the Fn key: no output Press Down Arrow key: KeyPress event, serial 36, synthetic NO, window 0x4400001, root 0x15d, subw 0x4400002, time 2699773, (44,45), root:(1352,298), state 0x10, keycode 116 (keysym 0xff54, Down), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x4400001, root 0x15d, subw 0x4400002, time 2699860, (44,45), root:(1352,298), state 0x10, keycode 116 (keysym 0xff54, Down), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False Press Fn+Down Arrow Keys together: KeyPress event, serial 36, synthetic NO, window 0x4400001, root 0x15d, subw 0x4400002, time 2701548, (44,45), root:(1352,298), state 0x10, keycode 116 (keysym 0xff54, Down), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x4400001, root 0x15d, subw 0x4400002, time 2701623, (44,45), root:(1352,298), state 0x10, keycode 116 (keysym 0xff54, Down), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False I've been searching this forum and other Linux-related forums for hours but I still have not found a solution. I mostly found advice on how to fix this when using an actual apple laptop or desktop, but I don't have that. They said to try something like the following echo 2 > /sys/module/hid_apple/ ... But since there's no hid_apple directory present on my systems, I've needed to modprobe hid_apple first. That didn't help either. I'm cool with changing some config files, or compiling my own patched kernel if that's necessary. I currently have a 10.04 and 12.04 system available to test. The same issue occurs when hooked up to Windows 7. Fn key still does nothing, not by itself or in combination with other keys. With some AutoHotkey fiddling, I was able to confirm the key is registered as pressed, but ignored by default. A custom AutoHotkey script can fix that. But AutoHotkey is only for Windows, I want my problem fixed on Linux. Hooked up to an iPad 2 it only works in combination with the F1-F12 keys. Not with the arrow keys. If the screen of the ipad is off, and I press just the Fn key, the screen will come on, so the key itself is registered as pressed. So to sum up my question: Can anyone help me get Page Up, Page Down, Home and End to work on this keyboard, when that requires me to use an Fn key which is currently not registered?

Read the article
Computer not POSTing "randomly"?

- by smoth190

I have a custom built PC that is exhibiting some...odd... behavior, something I've never seen before. It was working fine one day, and the next day, it wouldn't start. Seeing as I wanted an upgrade anyway, I purchased a new motherboard that was compatible with all my parts. While replacing the motherboard, I accidentally damaged the CPU. Well, I wanted a new one anyway... so I got a new one. Seeing as I was replacing a ton of parts already, I bought a new PSU because the old one was super loud. When I slapped it all together, it starts up, lights, fans, drives, they all start. But I get no display from the monitor. No beeps, which I believe means it doesn't POST. I figured it was the RAM, because after removing the sound card and graphics card, there was nothing else that I hadn't replaced. When I remove both sticks of RAM, I get a continuous beeping, and according to the mobo handbook, means no RAM. So I think the mobo is functional, or atleast partly. I bought new RAM, but it still didn't work. I tried 3 monitors, with both VGA and DIV. So it's probably not the monitor, either. Now, let me get to the random part. Every 20 or so boots (I should also mention, for about 3 out of 5 boots I have to unplug the PC because it won't powerdown via the button), it will POST and I'll get display. Then, after about 2 or 3 resets, it won't work again. This confuses me so much, because even when I change nothing, it will/will not work. My thought is that maybe it has something to do with the RAM not clearing or something. I also reset the CMOS battery, incase that had anything to do with it, but no eval. I found some weird suggestion online about holding the power button for 30 seconds while it was unplugged. That did nothing, but I didn't expect it would... I've replaced just about the entire computer, and all the parts are compatible. Done about everything I can think of, but nothing has worked. Hopefully someone can help me here. And as I side note: When I do get my computer to boot, it says my hardware has changed and I have to re-activate windows. But it says I have to call Microsoft to do it. So I get this fancy automated voice that asks me to enter in a code into windows, then it asks me "How many computers have you activated with this copy of Windows?". Well, I had it on my computer before I replaced everything, so I said 1. Then he yelled at me for violating my 1-use license. I dunno what's going on there, do I have to re-purchase Windows 7? And they wonder why people pirate software... That's just a bonus question, though. Specs: 8GB of DDR2 RAM (Corsair) AMD CPU (I don't know what GHz or model because I can't find the box... (I think its 4 cores of 2.8Ghz) ASRock A785GM-LE Motherboard

Read the article
I have a NGINX server configured to work with node.js, but many times a file of 1.03MB of js is not loaded by various browser and various pc

- by Totty

I'm using this in a local LAN so it should be quite fast. The nginx server use the node.js server to serve static files, so it must pass throught node.js to download the files, but that is not a problem when I'm not using the nginx. In chrome with debugger on I can see that the status is: 206 - partial content and it only has downloaded 31KB of 1.03MB. After 1.1 min it turns red and the status failed. Waiting time: 6ms Receiving: 1.1 min The headers in google chrom: Request URL:http://192.168.1.16/production/assembly/script/production.js Request Method:GET Status Code:206 Partial Content Request Headersview source Accept:*/* Accept-Charset:ISO-8859-1,utf-8;q=0.7,*;q=0.3 Accept-Encoding:gzip,deflate,sdch Accept-Language:pt-PT,pt;q=0.8,en-US;q=0.6,en;q=0.4 Connection:keep-alive Cookie:connect.sid=s%3Abls2qobcCaJ%2FyBNZwedtDR9N.0vD4Fi03H1bEdCszGsxIjjK0lZIjJhLnToWKFVxZOiE Host:192.168.1.16 If-Range:"1081715-1350053827000" Range:bytes=16090-16090 Referer:http://192.168.1.16/production/assembly/ User-Agent:Mozilla/5.0 (Windows NT 6.0) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.94 Safari/537.4 Response Headersview source Accept-Ranges:bytes Cache-Control:public, max-age=0 Connection:keep-alive Content-Length:1 Content-Range:bytes 16090-16090/1081715 Content-Type:application/javascript Date:Mon, 15 Oct 2012 09:18:50 GMT ETag:"1081715-1350053827000" Last-Modified:Fri, 12 Oct 2012 14:57:07 GMT Server:nginx/1.1.19 X-Powered-By:Express My nginx configurations: File 1: user totty; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /home/totty/web/production01_server/node_modules/production/_logs/_NGINX_access.txt; error_log /home/totty/web/production01_server/node_modules/production/_logs/_NGINX_error.txt; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; # gzip_vary on; # gzip_proxied any; # gzip_comp_level 6; # gzip_buffers 16 8k; # gzip_http_version 1.1; # gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## autoindex on; include /home/totty/web/production01_server/_deployment/nginxConfigs/server/*; } File that is included by the previous file: server { # custom location for entry # using only "/" instead of "/production/assembly" it # would allow you to go to "thatip/". In this way # we are limiting to "thatip/production/assembly/" location /production/assembly/ { # ip and port used in node.js proxy_pass http://127.0.0.1:3000/; } location /production/assembly.mongo/ { proxy_pass http://127.0.0.1:9000/; proxy_redirect off; } location /production/assembly.logs/ { autoindex on; alias /home/totty/web/production01_server/node_modules/production/_logs/; } }

Read the article
VPS 512 MB RAM with WordPressMU comes to consumes lots of memory

- by CAPitalZ

I have googled for days and gathered all optimization suggestions and tried. My sites are not getting any high hits. May be like 100 hits per day [all my sites combined]. Here are my specs I have 512 MB RAM VPS with burstable 1024 MB. Centos 5 32-bit & cPanel/WHM Apache 2.2 MySQL 5.0 PHP 5.3.2 Here is my Configs I have 2 WordPressMU production sites, and 1 test site my.cnf # The following options will be passed to all MySQL clients [client] #password = your_password port = 3306 socket = /var/lib/mysql/mysql.sock # Here follows entries for some specific programs # The MySQL server [mysqld] port = 3306 socket = /var/lib/mysql/mysql.sock skip-locking skip-bdb skip-innodb key_buffer = 16M max_allowed_packet = 1M table_cache = 64 sort_buffer_size = 512K net_buffer_length = 8K read_buffer_size = 256K read_rnd_buffer_size = 512K myisam_sort_buffer_size = 8M #CAPitalZ thread_cache_size=8 thread_concurrency=4 #query_cache_type=1 #query_cache_limit=1M query_cache_size=16M concurrent_insert=2 low_priority_updates=1 max_connections=50 tmp_table_size=16M max_heap_table_size=16M join_buffer_size=1M interactive_timeout=25 wait_timeout=1000 #connect_timout=10 not able to restart mysql max_connect_errors=10 # Don't listen on a TCP/IP port at all. This can be a security enhancement, # if all processes that need to connect to mysqld run on the same host. # All interaction with mysqld must be made via Unix sockets or named pipes. # Note that using this option without enabling named pipes on Windows # (via the "enable-named-pipe" option) will render mysqld useless! # skip-networking # Disable Federated by default skip-federated # Replication Master Server (default) # binary logging is required for replication log-bin=mysql-bin # required unique id between 1 and 2^32 - 1 # defaults to 1 if master-host is not set # but will not function as a master if omitted server-id = 1 [mysqld_safe] open_files_limit=8192 [mysqldump] quick max_allowed_packet = 16M [mysql] no-auto-rehash # Remove the next comment character if you are not familiar with SQL #safe-updates [isamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M [myisamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M [mysqlhotcopy] interactive-timeout httpd.conf I have unselected many modules and recompiled using EasyApache in WHM. Only have the following modules built Deflate Expires Fileprotect Imagemap MPM Prefork Version [default] EAccelerator for PHP Bcmath Calendar CurlSSL [I'm using Curl. But I don't have any https sites] Expat GD [for image cropping] Gettext Imap Mbregex [default] Mbstring [need both Mbregex and Mbstring for utf-8] Mysql of the system MySQL "Improved" extension. Sockets TTF (FreeType) [I'm using custom font] Zlib Under Global Configuration I only have FollowSymLinks enabled I Have TraceEnable, ServerSignature, FileETag OFF ServerTokens ProductOnly DirectoryIndex Priority has index.php as the first one I have removed Clamd [Clam Anti-virus] SpamAssasin is Off Under Tweak Settings Default catch-all/default address behavior for new accounts. This is set to "fail" All stats programs turned off I have eAccelerator installed and checked in phpinfo and its working [Pre VirtualHost Include under WHM] Timeout 20 KeepAlive On MaxKeepAliveRequests 200 KeepAliveTimeout 3 MinSpareServers 1 MaxSpareServers 3 StartServers 1 ServerLimit 50 MaxClients 50 MaxRequestsPerChild 4000 ExtendedStatus Off #ServerType standalone this throws error HostnameLookups Off <Directory "/"> AllowOverride None </Directory> My sites will take ages to load and WHM/CPanel will not even load. adadaa.com/ http://adadaa.net/ kadais.ca/ My average memory consumption is like 1000 MB! [yes always bursting] The process that consumes most CPU and also most memory is mysql But I also get like 15 httpd processes [when its bursting] I already got warning from cpuwatchcheck saying "While processing, the cpu has been maxed out for more than a 6 hour period. The current load/uptime line on the server at the time of this email is 07:00:37 up 11:30, 0 users, load average: 14.64, 16.79, 20.07" I don't know, I have tried switching these config values many different times, but nothing seems to work. Please show some light... Thanks

Read the article
Optimise Apache for EC2 micro instance

- by Shiyu Sekam

I'm running apache2 on a EC2 micro instance with ~600 mb RAM. The instance was running for almost a year without problems, but in the last weeks it just keeps crashing, because the server reached MaxClients. The server basically runs few websites, one wordpress blog(not often used), company website(most used) and 2 small sites, which are just internal. The database for the blog runs on RDS, so there's no Mysql running on this web server. When I came to the company, the server already was setup and is running apache + mod_php + prefork. We want to migrate that in the future to a nginx + php-fpm, but it still needs further testing. So for now I have to stick with the old setup. I also use CloudFlare DDOS protection in front of the server, because it was attacked a couple of the times in the last weeks. My company don't want to pay money for a better web server at this point, so I have to stick with the micro instance also. Additionally the code for the website we run is really bad and slow and sometimes a single page load can take up to 15 seconds. The whole website is dynamic and written in PHP, so caching isn't really an option here. It's a customized search for users. I've already turned off KeepAlive, which improved the performance a little bit. My prefork config looks like the following: StartServers 2 MinSpareServers 2 MaxSpareServers 5 ServerLimit 10 MaxClients 10 MaxRequestsPerChild 100 The server just becomes unresponsive after a while running and I've run the following command to see how many connections there are: netstat | grep http | wc -l 75 Trying to restart apache helps for a short moment, but after that a while the apache process(es) become unresponsive again. I've the following modules enabled(output of apache2ctl -M) Loaded Modules: core_module (static) log_config_module (static) logio_module (static) version_module (static) mpm_prefork_module (static) http_module (static) so_module (static) alias_module (shared) authz_host_module (shared) deflate_module (shared) dir_module (shared) expires_module (shared) mime_module (shared) negotiation_module (shared) php5_module (shared) rewrite_module (shared) setenvif_module (shared) ssl_module (shared) status_module (shared) Syntax OK apache2.conf # Security ServerTokens OS ServerSignature On TraceEnable On ServerName "web.example.com" ServerRoot "/etc/apache2" PidFile ${APACHE_PID_FILE} Timeout 30 KeepAlive off User www-data Group www-data AccessFileName .htaccess <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> <Directory /> Options FollowSymLinks AllowOverride None </Directory> DefaultType none HostnameLookups Off ErrorLog /var/log/apache2/error.log LogLevel warn EnableSendfile On #Listen 80 Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf Include /etc/apache2/ports.conf LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent Include /etc/apache2/conf.d/*.conf Include /etc/apache2/sites-enabled/*.conf Vhost of main site <VirtualHost *:80> ServerName www.example.com ## Vhost docroot DocumentRoot /srv/www/jenkins/Web ## Directories, there should at least be a declaration for /srv/www/jenkins/Web <Directory /srv/www/jenkins/Web> AllowOverride All Order allow,deny Allow from all </Directory> ## Load additional static includes ## Logging ErrorLog /var/log/apache2/www.example.com.error.log LogLevel warn ServerSignature Off CustomLog /var/log/apache2/www.example.com.access.log combined ## Rewrite rules RewriteEngine On RewriteCond %{HTTP_HOST} !^www.example.com$ RewriteRule ^.*$ http://www.example.com%{REQUEST_URI} [R=301,L] ## Server aliases ServerAlias www.example.invalid ServerAlias example.com ## Custom fragment <Location /srv/www/jenkins/Web/library> Order Deny,Allow Deny from all </Location> <Files ~ "^\.(.+)"> Order deny,allow deny from all </Files> </VirtualHost>

Read the article
Windows 7 is stuck at "Starting Windows" when I attempt to boot computer

- by Eli

Basically, whenever I turn on my computer, it gets to the Starting Windows phase and just stays there. The startup animation still plays, yet it gets nowhere. I have tried booting into safe mode, however it gets stuck at loading CLASSPNP.SYS. It then freezes there and doesn't continue booting. I have tried booting into recovery mode from the hard drive, and it freezes after displaying the background image. I have tried booting from a recovery CD, which works, and I was able to use system restore. However, using system restore did not fix it, and it still is stuck at the Starting Windows screen. I have tried booting a Windows CD (Windows 8 Retail Installer) to see if I could upgrade it to fix this issue, however that froze at a blank screen after it got past the boot logo. I have tried changing around the BIOS settings (including resetting), to no avail. I have tried re-plugging the internal PSU cables (this is a custom-built desktop), yet this has changed nothing. I can boot into a loopback Ubuntu install on the same drive, which works fine, other than the fact that it has issues with some of the USB ports and the network card. This system has worked fine for the past few months, completely stable, and nothing in the configuration has changed before this error started happening. Startup Repair on the Windows recovery CD doesn't find any issues. Unplugging my secondary hard drive or swapping around memory doesn't change anything. The hard drive itself is fine, it hasn't shown any signs of failure and once again, boots my other OS fine. If anyone could help with this, that would be great. I can't seem to find any possible solution to this. If it makes any difference, my system specs are as follows: AMD FX-8320 Gigabyte GA-970A-D3 4GB of DDR3 Radeon HD 6870 550w PSU I'd like to not have to reinstall Windows, for I have more than a terabyte of data that I would have to back up if that becomes the only option. EDIT: I have since tried the following: Tried the solution involving restoring files from RegBackup, which changed nothing. Tried testing everything with Hiren's boot CD, everything comes back as fine. Tried disabling everything unnecessary in the BIOS and unplugging everything unneeded, it still hangs. Tried swapping out every possible combination of RAM, it still has the same result. The RAM is not at fault it seems Tried every GPU I own (which is many!) and it still hangs at the exact same place. Tried minimizing the power consumption as much as possible, even using an old PCI graphics card. It still hangs at the same place in the same way, signifying that it's not the PSU at fault. Tried resetting the BIOS again, still nothing. Tried every possible combination of BIOS options, even downclocking everything, it still hangs in the same spot. Tried upgrading the BIOS from version FB to FD, which changed nothing. Based on this, I would conclude the motherboard to be at fault. Are there any other possibilities? I don't want to spend $150 for a new motherboard. EDIT 2: This is what it gets stuck at when I try to boot into safe mode: Note the slight graphical corruption at the top of the screen. No matter how I set up the system, this seems to be there. In addition, either it has stopped booting into safe mode now, or it takes upwards of 2+ hours, and I haven't left it running for that long.

Read the article
SOA Suite 11g Native Format Builder Complex Format Example

- by bob.webster

This rather long posting details the steps required to process a grouping of fixed length records using Format Builder. If it’s 10 pm and you’re feeling beat you might want to leave this until tomorrow. But if it’s 10 pm and you need to get a Format Builder Complex template done, read on… The goal is to process individual orders from a file using the 11g File Adapter and Format Builder Sample Data =========== 001Square Widget 0245.98 102Triagular Widget 1120.00 403Circular Widget 0099.45 ORD8898302/01/2011 301Hexagon Widget 1150.98 ORD6735502/01/2011 The records are fixed length records representing a number of logical Order records. Each order record consists of a number of item records starting with a 3 digit number, followed by a single Summary Record which starts with the constant ORD. How can this file be processed so that the first poll returns the first order? 001Square Widget 0245.98 102Triagular Widget 1120.00 403Circular Widget 0099.45 ORD8898302/01/2011 And the second poll returns the second order? 301Hexagon Widget 1150.98 ORD6735502/01/2011 Note: if you need more than one order per poll, that’s also possible, see the “Multiple Messages” field in the “File Adapter Step 6 of 9” snapshot further down. To follow along with this example you will need - Studio Edition Version 11.1.1.4.0 with the - SOA Extension for JDeveloper 11.1.1.4.0 installed Both can be downloaded from here: http://www.oracle.com/technetwork/middleware/soasuite/downloads/index.html You will not need a running WebLogic Server domain to complete the steps and Format Builder tests in this article. Start with a SOA Composite containing a File Adapter The Format Builder is part of the File Adapter so start by creating a new SOA Project and Composite. Here is a quick summary for those not familiar with these steps - Start JDeveloper - From the Main Menu choose File->New - In the New Gallery window that opens Expand the “General” category and Select the Applications node. Then choose SOA Application from the Items section on the right. Finally press the OK button. - In Step 1 of the “Create SOA Application wizard” that appears enter an Application Name and an Directory of your choice, then press the Next button. - In Step 2 of the “Create SOA Application wizard”, press the Next button leaving all entries as defaulted. - In Step 3 of the “Create SOA Application wizard”, Enter a composite name of your choice and Press the Finish Button These steps result in a new Application and SOA Project. The SOA Project contains a composite.xml file which is opened and shown below. For our example we have not defined a Mediator or a BPEL process to minimize the steps, but one or the other would eventually be needed to use the File Adapter we are about to create. Drag and drop the File Adapter icon from the Component Pallette onto either the LEFT side of the diagram under “Exposed Services” or the right side under “External References”. (See the Green Circle in the image below). Placing the adapter on the left side would indicate the file being processed is inbound to the composite, if the adapter is placed on the right side then the data is outbound to a file. Note that the same Format Builder definition can be used in both directions. For example we could use the format with a File Adapter on the left side of the composite to parse fixed data into XML, modify the data in our Composite or BPEL process and then use the same Format Builder definition with a File adapter on the right side of the composite to write the data back out in the same fixed data format When the File Adapter is dropped on the Composite the File Adapter Wizard Appears. Skip Past the first page, Step 1 of 9 by pressing the Next button. In Step 2 enter a service name of your choice as shown below, then press Next When the Native Format Builder appears, skip the welcome page by pressing next. Also press the Next button to accept the settings on Step 3 of 9 On Step 4, select Read File and press the Next button as shown below. On Step 5 enter a directory that will contain a file with the input data, then Press the Next button as shown below. In step 6, enter *.txt or another file format to select input files from the input directory mentioned in step 5. ALSO check the “Files contain Multiple Messages” checkbox and set the “Publish Messages in Batches of” field to 1. The value can be set higher to increase the number of logical order group records returned on each poll of the file adapter. In other words, it determines the number of Orders that will be sent to each instance of a Mediator or Composite processing using the File Adapter. Skip Step 7 by pressing the Next button In Step 8 press the Gear Icon on the right side to load the Native Format Builder. Native Format Builder appears Before diving into the format, here is an overview of the process. Approach - Bottom up Assuming an Order is a grouping of item records and a summary record…. - Define a separate Complex Type for each Record Type found in the group. (One for itemRecord and one for summaryRecord) - Define a Complex Type to contain the Group of Record types defined above (LogicalOrderRecord) - Define a top level element to represent an order. (order) The order element will be of type LogicalOrderRecord Defining the Format In Step 1 select “Create new” and “Complex Type” and “Next” In Step two browse to and select a file containing the test data shown at the start of this article. A link is provided at the end of this article to download a file containing the test data. Press the Next button In Step 3 Complex types must be define for each type of input record. Select the Root-Element and Click on the Add Complex Type icon This creates a new empty complex type definition shown below. The fastest way to create the definition is to highlight the first line of the Sample File data and drag the line onto the <new_complex_type> Format Builder introspects the data and provides a grid to define additional fields. Change the “Complex Type Name” to “itemRecord” Then click on the ruler to indicate the position of fixed columns. Drag the red triangle icons to the exact columns if necessary. Double click on an existing red triangle to remove an unwanted entry. In the case below fields are define in columns 0-3, 4-28, 29-eol When the field definitions are correct, press the “Generate Fields” button. Field entries named C1, C2 and C3 will be created as shown below. Click on the field names and rename them from C1->itemNum, C2->itemDesc and C3->itemCost When all the fields are correctly defined press OK to save the complex type. Next, the process is repeated to define a Complex Type for the SummaryRecord. Select the Root-Element in the schema tree and press the new complex type icon Then highlight and drag the Summary Record from the sample data onto the <new_complex_type> Change the complex type name to “summaryRecord” Mark the fixed fields for Order Number and Order Date. Press the Generate Fields button and rename C1 and C2 to itemNum and orderDate respectively. The last complex type to be defined is a type to hold the group of items and the summary record. Select the Root-Element in the schema tree and click the new complex type icon Select the “<new_complex_type>” entry and click the pencil icon On the Complex Type Details page change the name and type of each input field. Change line 1 to be named item and set the Type to “itemRecord” Change line 2 to be named summary and set the Type to “summaryRecord” We also need to indicate that itemRecords repeat in the input file. Click the pencil icon at the right side of the item line. On the Edit Details page change the “Max Occurs” entry from 1 to UNBOUNDED. We also need to indicate how to identify an itemRecord. Since each item record has “.” in column 32 we can use this fact to differentiate an item record from a summary record. Change the “Look Ahead” field to value 32 and enter a period in the “Look For” field Press the OK button to save entry. Finally, its time to create a top level element to represent an order. Select the “Root-Element” in the schema tree and press the New element icon Click on the <new_element> and press the pencil icon. Set the Element Name to “order” and change the Data Type to “logicalOrderRecord” Press the OK button to save the element definition. The final definition should match the screenshot below. Press the Next Button to view the definition source. Press the Test Button to test the definition Press the Green Triangle Icon to run the test. And we are presented with an unwelcome error. The error states that the processor ran out of data while working through the definition. The processor was unable to differentiate between itemRecords and summaryRecords and therefore treated the entire file as a list of itemRecords. At end of file, the “summary” portion of the logicalOrderRecord remained unprocessed but mandatory. This root cause of this error is the loss of our “lookAhead” definition used to identify itemRecords. This appears to be a bug in the Native Format Builder 11.1.1.4.0 Luckily, a simple workaround exists. Press the Cancel button and return to the “Step 4 of 4” Window. Manually add nxsd:lookAhead="32" nxsd:lookFor="." attributes after the maxOccurs attribute of the item element. as shown in the highlighted text below. When the lookAhead and lookFor attributes have been added Press the Test button and on the Test page press the Green Triangle. The test is now successful, the first order in the file is returned by the File Adapter. Below is a complete listing of the Result XML from the right column of the screen above Try running it The downloaded input test file and completed schema file can be used for testing without following all the Native Format Builder steps in this example. Use the following link to download a file containing the sample data. Download Sample Input Data This is the best approach rather than cutting and pasting the input data at the top of the article. Since the data is fixed length it’s very important to watch out for trailing spaces in the data and to ensure an eol character at the end of every line. The download file is correctly formatted. The final schema definition can be downloaded at the following link Download Completed Schema Definition - Save the inputData.txt file to a known location like the xsd folder in your project. - Save the inputData_6.xsd file to the xsd folder in your project. - At step 1 in the Native Format Builder wizard (as shown above) check the “Edit existing” radio button, then browse and select the inputData_6.xsd file - At step 2 of the Format Builder configuration Wizard (as shown above) supply the path and filename for the inputData.txt file. - You can then proceed to the test page and run a test. - Remember the wizard bug will drop the lookAhead and lookFor attributes, you will need to manually add nxsd:lookAhead="32" nxsd:lookFor="." after the maxOccurs attribute of the item element in the LogicalOrderRecord Complex Type. (as shown above) Good Luck with your Format Project

Read the article
This task is currently locked by a running workflow and cannot be edited. Limitation to both Nintex and SPD workflow

- by ybbest

Note, this post is from Nintex Forum here. These limitations apply to both SharePoint designer Workflow and Nintex Workflow as Nintex using the SharePoint workflow engine. The common cause that I experience is that ‘parent’ workflow is generating more than one task at once. This is common as you can have multiple approvers for certain approval process. You could also have workflow running when the task is created, one of the common scenario is you would like to set a custom column value in your approval task. For me this is huge limitation, as Nintex lover I really hope Nintex could solve this problem with Microsoft going forward. Introduction “This task is currently locked by a running workflow and cannot be edited” is a common message that is seen when an error occurs while the SharePoint workflow engine is processing a task item associated with a workflow. When a workflow processes a task normally, the following sequence of events is expected to occur: 1. The process begins. 2. The workflow places a ‘lock’ on the task so nothing else can change the values while the workflow is processing. 3. The workflow processes the task. 4. The lock is released when the task processing is finished. When the message is encountered, it usually indicates that an error occurred between step 2 and 4. As a result, the lock is never released. Therefore, the ‘task locked’ message is not an error itself, rather a symptom of another error – the ‘task locked’ message does not indicate what went wrong. In most cases, once this message is encountered, the workflow cannot be made to continue and must be terminated and started again. The following is a guide that can help troubleshoot the cause of these messages. Some initial observations to narrow down the potential causes are: Is the error consistent or intermittent? When the error is consistent, it will happen every time the workflow is run. When it is intermittent, it may happen regularly, but not every time. Does the error occur the first time the user tries to respond to a task, or do they respond and notice the workflow does not continue, and when they respond again the error occurs? If the message is present when the user first responds to the task, the issue would have occurred when the task was created. Otherwise, it would have occurred when the user attempted to respond to the task. Causes Modifying the task list A cause of this error appearing consistently the first time a user tries to respond to a task is a modification to the default task list schema. For example, changing the ‘Assigned to’ field in a task list to be a multiple selection will cause the behaviour. Deleting the workflow task then restoring it from the Recycle bin If you start a workflow, delete the workflow task then restore it from the Recycle Bin in SharePoint, the workflow will fail with the ‘task locked’ error. This is confirmed behaviour whether using a SharePoint Designer or a Nintex workflow. You will need to terminate the workflow and start it again. Parallel simultaneous responses A cause of this error appearing inconsistently is multiple users responding to tasks in parallel at the same time. In this scenario, one task will complete correctly and the other will not process. When the user tries again, the ‘task locked’ message will display. Nintex included a workaround for this issue in build 11000. In build 11000 and later, one of the users will receive a message on the task form when they attempt to respond, stating that they need to try again in a few moments. Additional processing on the task A cause of this error appearing consistently and inconsistently is having an additional system running on the items in the task list. Some examples include: a workflow running on the task list, an event receiver running on the task list or another automated process querying and updating workflow tasks. Note: This Microsoft help article (http://office.microsoft.com/en-us/sharepointdesigner/HA102376561033.aspx#5) explains creating a workflow that runs on the task list to update a field on the task. Our experience shows that this causes the ‘Task Locked’ issues when the ‘parent’ workflow is generating more than one task at once. Isolated system error If the error is a rare event, or a ‘one off’ event, then an isolated system error may have occurred. For example, if there is a database connectivity issue while the workflow is processing the task response, the task will lock. In this case, the user will respond to a task but the workflow will not continue. When they respond again, the ‘task locked’ message will display. In this case, there will be an error in the SharePoint ULS Logs at the time that the user originally responded. Temporary delay while workflow processes If the workflow is taking a long time to process after a user submits a task, they may notice and try to respond to the task again. They will see the task locked error, but after a number of attempts (or after waiting some time) the task response page eventually indicates the task has been responded to. In this case, nothing actually went wrong, and the error message gives an accurate indication of what is happening – the workflow temporarily locked the task while it was processing. This scenario may occur in a very large workflow, or after the SharePoint application pool has just started. Modifying the task via a web service with an invalid url If the Nintex Workflow web service is used to respond to or delegate a task, the site context part of the url must be a valid alternative access mapping url. For example, if you access the web service via the IP address of the SharePoint server, and the IP address is not a valid AAM, the task can become locked. The workflow has become stuck without any apparent errors This behaviour can occur as a result of a bug in the SharePoint 2010 workflow engine. If you do not have the August 2010 Cumulative Update (or later) for SharePoint, and your workflow uses delays, “Flexi-task”, State machine”, “Task Reminder” actions or variables, you could be affected. Check the SharePoint 2010 Updates site here: http://technet.microsoft.com/en-us/sharepoint/ff800847. The October CU is recommended http://support.microsoft.com/kb/2553031. The fix is described as “Consider the following scenario. You add a Delay activity to a workflow. Then, you set the duration for the Delay activity. You deploy the workflow in SharePoint Foundation 2010. In this scenario, the workflow is not resumed after the duration of the Delay activity”. If you find this is occurring in your environment, install the October CU, terminate all the running workflows affected and run them afresh. Investigative steps The first step to isolate the issue is to create a new task list on the site and configure the workflow to use it. Any customizations that were made to the original task list should not be made to the new task list. If the new task list eliminates the issue, then the cause can be attributed to the original task list or a change that was made to it. To change the task list that the workflow uses: In Workflow Designer select Settings -> Startup Options Then configure the task list as required If any of the scenarios above do not help, check the SharePoint logs for any messages with a category of ‘Workflow Infrastructure’. Conclusion The information in this article has been gathered from observations and investigations by Nintex. The sources of these issues are the underlying SharePoint workflow engine. This article will be updated if further causes are discovered. From <http://connect.nintex.com/forums/thread/6503.aspx>

Read the article
Scan a Windows PC for Viruses from a Ubuntu Live CD

- by Trevor Bekolay

Getting a virus is bad. Getting a virus that causes your computer to crash when you reboot is even worse. We’ll show you how to clean viruses from your computer even if you can’t boot into Windows by using a virus scanner in a Ubuntu Live CD. There are a number of virus scanners available for Ubuntu, but we’ve found that avast! is the best choice, with great detection rates and usability. Unfortunately, avast! does not have a proper 64-bit version, and forcing the install does not work properly. If you want to use avast! to scan for viruses, then ensure that you have a 32-bit Ubuntu Live CD. If you currently have a 64-bit Ubuntu Live CD on a bootable flash drive, it does not take long to wipe your flash drive and go through our guide again and select normal (32-bit) Ubuntu 9.10 instead of the x64 edition. For the purposes of fixing your Windows installation, the 64-bit Live CD will not provide any benefits. Once Ubuntu 9.10 boots up, open up Firefox by clicking on its icon in the top panel. Navigate to http://www.avast.com/linux-home-edition. Click on the Download tab, and then click on the link to download the DEB package. Save it to the default location. While avast! is downloading, click on the link to the registration form on the download page. Fill in the registration form if you do not already have a trial license for avast!. By the time you’ve filled out the registration form, avast! will hopefully be finished downloading. Open a terminal window by clicking on Applications in the top-left corner of the screen, then expanding the Accessories menu and clicking on Terminal. In the terminal window, type in the following commands, pressing enter after each line. cd Downloadssudo dpkg –i avast* This will install avast! on the live Ubuntu environment. To ensure that you can use the latest virus database, while still in the terminal window, type in the following command: sudo sysctl –w kernel.shmmax=128000000 Now we’re ready to open avast!. Click on Applications on the top-left corner of the screen, expand the Accessories folder, and click on the new avast! Antivirus item. You will first be greeted with a window that asks for your license key. Hopefully you’ve received it in your email by now; open the email that avast! sends you, copy the license key, and paste it in the Registration window. avast! Antivirus will open. You’ll notice that the virus database is outdated. Click on the Update database button and avast! will start downloading the latest virus database. To scan your Windows hard drive, you will need to “mount” it. While the virus database is downloading, click on Places on the top-left of your screen, and click on your Windows hard drive, if you can tell which one it is by its size. If you can’t tell which is the correct hard drive, then click on Computer and check out each hard drive until you find the right one. When you find it, make a note of the drive’s label, which appears in the menu bar of the file browser. Also note that your hard drive will now appear on your desktop. By now, your virus database should be updated. At the time this article was written, the most recent version was 100404-0. In the main avast! window, click on the radio button next to Selected folders and then click on the “+” button to the right of the list box. It will open up a dialog box to browse to a location. To find your Windows hard drive, click on the “>” next to the computer icon. In the expanded list, find the folder labelled “media” and click on the “>” next to it to expand it. In this list, you should be able to find the label that corresponds to your Windows hard drive. If you want to scan a certain folder, then you can go further into this hierarchy and select that folder. However, we will scan the entire hard drive, so we’ll just press OK. Click on Start scan and avast! will start scanning your hard drive. If a virus is found, you’ll be prompted to select an action. If you know that the file is a virus, then you can Delete it, but there is the possibility of false positives, so you can also choose Move to chest to quarantine it. When avast! is done scanning, it will summarize what it found on your hard drive. You can take different actions on those files at this time by right-clicking on them and selecting the appropriate action. When you’re done, click Close. Your Windows PC is now free of viruses, in the eyes of avast!. Reboot your computer and with any luck it will now boot up! Alternatives to avast! If avast! and a liberal amount of Googling doesn’t fix your problem, it’s possible that a different virus scanner will fix your obscure issue. Here are a list of other virus scanners available for Ubuntu that are either free or offer free trials. See their support forums for help on installing these virus scanners. Avira AntiVir Personal for Linux / Solaris Panda Antivirus for Linux Installation and usage guide from Ubuntu F-PROT Antivirus for Linux ClamAV installation and usage guide from Ubuntu NOD32 Antivirus for Linux Kaspersky Anti-Virus 2010 Bitdefender Antivirus for Unices Conclusion Running avast! from a Ubuntu Live CD can clean the vast majority of viruses from your Windows PC. This is another reason to always have a Ubuntu Live CD ready just in case something happens to your Windows installation! Similar Articles Productive Geek Tips Secure Computing: Windows Live OneCareHow To Remove Antivirus Live and Other Rogue/Fake Antivirus MalwareUse the Windows Key for the "Start" Menu in Ubuntu LinuxScan Files for Viruses Before You Download With Dr.WebAsk the Readers: Share Your Tips for Defeating Viruses and Malware TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 The Ultimate Guide For YouTube Lovers Will it Blend? iPad Edition Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC

Read the article
Silverlight 4 Tools for VS 2010 and WCF RIA Services Released

- by ScottGu

The final release of the Silverlight 4 Tools for Visual Studio 2010 and WCF RIA Services is now available for download. Download and Install If you already have Visual Studio 2010 installed (or the free Visual Web Developer 2010 Express), then you can install both the Silverlight 4 Tooling Support as well as WCF RIA Services support by downloading and running this setup package (note: please make sure to uninstall the preview release of the Silverlight 4 Tools for VS 2010 if you have previously installed that). The Silverlight 4 Tools for VS 2010 package extends the Silverlight support built into Visual Studio 2010 and enables support for Silverlight 4 applications as well. It also installs WCF RIA Services application templates and libraries: Today’s release includes the English edition of the Silverlight 4 Tooling – localized versions will be available next month for other Visual Studio languages as well. Silverlight Tooling Support Visual Studio 2010 includes rich tooling support for building Silverlight and WPF applications. It includes a WYSIWYG designer surface that enables you to easily use controls to construct UI – including the ability to take advantage of layout containers, and apply styles and resources: The VS 2010 designer enables you to leverage the rich data binding support within Silverlight and WPF, and easily wire-up bindings on controls. The Data Sources window within Silverlight projects can be used to reference POCO objects (plain old CLR objects), WCF Services, WCF RIA Services client proxies or SharePoint Lists. For example, let’s assume we add a “Person” class like below to our project: We could then add it to the Data Source window which will cause it to show up like below in the IDE: We can optionally customize the default UI control types that are associated for each property on the object. For example, below we’ll default the BirthDate property to be represented by a “DatePicker” control: And then when we drag/drop the Person type from the Data Sources onto the design-surface it will automatically create UI controls that are bound to the properties of our Person class: VS 2010 allows you to optionally customize each UI binding further by selecting a control, and then right-click on any of its properties within the property-grid and pull up the “Apply Bindings” dialog: This will bring up a floating data-binding dialog that enables you to easily configure things like the binding path on the data source object, specify a format convertor, specify string-format settings, specify how validation errors should be handled, etc: In addition to providing WYSIWYG designer support for WPF and Silverlight applications, VS 2010 also provides rich XAML intellisense and code editing support – enabling a rich source editing environment. Silverlight 4 Tool Enhancements Today’s Silverlight 4 Tooling Release for VS 2010 includes a bunch of nice new features. These include: Support for Silverlight Out of Browser Applications and Elevated Trust Applications You can open up a Silverlight application’s project properties window and click the “Enable Running Application Out of Browser” checkbox to enable you to install an offline, out of browser, version of your Silverlight 4 application. You can then customize a number of “out of browser” settings of your application within Visual Studio: Notice above how you can now indicate that you want to run with elevated trust, with hardware graphics acceleration, as well as customize things like the Window style of the application (allowing you to build a nice polished window style for consumer applications). Support for Implicit Styles and “Go to Value Definition” Support: Silverlight 4 now allows you to define “implicit styles” for your applications. This allows you to style controls by type (for example: have a default look for all buttons) and avoid you having to explicitly reference styles from each control. In addition to honoring implicit styles on the designer-surface, VS 2010 also now allows you to right click on any control (or on one of it properties) and choose the “Go to Value Definition…” context menu to jump to the XAML where the style is defined, and from there you can easily navigate onward to any referenced resources. This makes it much easier to figure out questions like “why is my button red?”: Style Intellisense VS 2010 enables you to easily modify styles you already have in XAML, and now you get intellisense for properties and their values within a style based on the TargetType of the specified control. For example, below we have a style being set for controls of type “Button” (this is indicated by the “TargetType” property). Notice how intellisense now automatically shows us properties for the Button control (even within the <Setter> element): Great Video - Watch the Silverlight Designer Features in Action You can see all of the above Silverlight 4 Tools for Visual Studio 2010 features (and some more cool ones I haven’t mentioned) demonstrated in action within this 20 minute Silverlight.TV video on Channel 9: WCF RIA Services Today we also shipped the V1 release of WCF RIA Services. It is included and automatically installed as part of the Silverlight 4 Tools for Visual Studio 2010 setup. WCF RIA Services makes it much easier to build business applications with Silverlight. It simplifies the traditional n-tier application pattern by bringing together the ASP.NET and Silverlight platforms using the power of WCF for communication. WCF RIA Services provides a pattern to write application logic that runs on the mid-tier and controls access to data for queries, changes and custom operations. It also provides end-to-end support for common tasks such as data validation, authentication and authorization based on roles by integrating with Silverlight components on the client and ASP.NET on the mid-tier. Put simply – it makes it much easier to query data stored on a server from a client machine, optionally manipulate/modify the data on the client, and then save it back to the server. It supports a validation architecture that helps ensure that your data is kept secure and business rules are applied consistently on both the client and middle-tiers. WCF RIA Services uses WCF for communication between the client and the server It supports both an optimized .NET to .NET binary serialization format, as well as a set of open extensions to the ATOM format known as ODATA and an optional JavaScript Object Notation (JSON) format that can be used by any client. You can hear Nikhil and Dinesh talk a little about WCF RIA Services in this 13 minutes Channel 9 video. Putting it all Together – the Silverlight 4 Training Kit Check out the Silverlight 4 Training Kit to learn more about how to build business applications with Silverlight 4, Visual Studio 2010 and WCF RIA Services. The training kit includes 8 modules, 25 videos, and several hands-on labs that explain Silverlight 4 and WCF RIA Services concepts and walks you through building an end-to-end application with them. The training kit is available for free and is a great way to get started. Summary I’m really excited about today’s release – as they really complete the Silverlight development story and deliver a great end to end runtime + tooling story for building applications. All of the above features are available for use both in VS 2010 as well as the free Visual Web Developer 2010 Express Edition – making it really easy to get started building great solutions. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article
Our Look at Opera 10.50 Web Browser

- by Asian Angel

Everyone has been talking about the newest version of Opera recently but perhaps you have not looked at it too closely yet. Today we will take a look at 10.50 and let you see what this “new browser” is all about. The New Engines Carakan JavaScript Engine: Runs web applications up to 7 times faster than its predecessor Futhark Vega Graphics Library: Enables super fast and smooth graphics on everything from tab switching to webpage animation Presto 2.5: Provides support for HTML5, CSS2.1 and the latest CSS3 standards A Look at the Features Available If you have installed or used older versions of Opera before then the default look after a clean install will probably seem rather different. The main differences in appearance are mainly located within the “glass border” areas of the browser. The “Speed Dial” setup looks and works just as well as in previous versions. You can set a favorite wallpaper or image as your background and choose the number of “dials” using the “Configure Speed Dial Command”. One of the “standout” differences is the “O Button”. All of the menus have been condensed into this single access point but it only takes a few moments to find what you are looking for. If you have used the style before in earlier versions of Opera some of the items have been moved around. For those who prefer the “Menu Bar” that can be easily restored using the “Show Menu Bar Command”. If desired you can actually “extend” the “Tab Bar” downwards to display thumbnails of your open tabs. Just use your mouse to grab the bottom of the “Tab Bar” and adjust it to suit your personal needs. The only problem with this feature is that it will quickly use up a good sized portion of your available UI and browser window space. The “Password Manager” is ready to access when needed…the background for the button will turn a shiny metallic blue when you open a webpage that you have “Login Information” saved for. One of the new features is a small “Recycle Bin Button” in the upper right corner. Clicking on this will display a list of recently closed tabs letting you have easy access to any tabs that you may have accidentally closed. This is definitely a great feature to have as an easy access button. For those who were used to how the “Zoom Feature” looked before it has a new “look” to it. Instead of the pop-up menu-type listing of “view sizes” present before you now have a slider button that you can use to adjust the zooming level. For our default setup here the “Sidebar Panels” available were: “Bookmarks, Widgets, Unite, Notes, Downloads, History, & Panels”. Additional panels such as “Links, Windows, Search, Info, etc.” are available if you want and/or need them (accessible using the “Panels Plus Sign Button”). The “Opera Link Button” makes it easy for you to synchronize your “Speed Dial, Bookmarks, Personal Bar, Custom Searches, History & Notes”. Note: “Opera Link” requires an account and can be signed up for using the link provided below. Want to share files with your family and friends? “Unite” allows you to do that and more. With “Unite” you can: “Stream Music, Show Photo Galleries, Share Files and/or Folders, & host webpages directly from your browser”. We have a more in-depth look at “Unite” in our article here. Note: Use of “Unite” requires an Opera account. Got a slow internet connection? “Opera Turbo” can help with that by running the web traffic through their “compression servers” to speed up your web browsing. Keep in mind that “Opera Turbo” will not engage if you are accessing a secure website (i.e. your bank’s website) thus preserving your security. Note: “Opera Turbo” can be set up to automatically detect slow internet connections (i.e. crowded Wi-Fi in a cafe). Opera has a built-in “Private Browsing Mode” now for those who prefer anonymous browsing and want to keep the “history records clean” on their computer. To access it go to “Tabs and windows” and select “New private tab” or “New private window” as desired. When you open your new “Private Tab or Window” you will see the following message with details on how Opera will handle browsing information and a large “door hanger symbol”. Notice that the one tab is locked into “Private Browsing Mode” while the others are still working in “Regular Browsing Mode”. Very nice! A miniature version of the “door hanger symbol” will be present on any tab that is locked into “Private Browsing Mode”. If you are using Windows 7 then you will love how things look from your “Taskbar”. Here you can see four very nice looking thumbnails for the tabs that we had open. All that you have to do is click on the desired thumbnail… The “Context Menu” looks just as lovely as the thumbnails and definitely has some terrific functionality built into it. Add Enhanced Aero Capability If you love “Aero” and want more for your new Opera install then we have the perfect theme for you. The theme’s name is Z1-AV69 and once you have downloaded it you will need to place it in the “Skins Subfolder” in Opera’s “Program Files Folder”. Note: For our example we used version 1.10 but version 2.00 is now available (link provided below). Once you have restarted Opera, go to the “O Menu” and select “Appearance”. When the “Appearance Window” opens click on “Z1-Glass Skin” and then click “OK”. All of a sudden you will have more “Aero Goodness” to enjoy. Compare this screenshot with the one at the top of this article…the only part that is not transparent now is the browser window area itself. Want even more “Aero Goodness”? Right click on the “Tab Bar” and set “Tab Bar Placement” to “Left”. Note: You can achieve the same effect by setting the “Tab Bar Placement” to “Right”. With the “Speed Dial” visible you will be able to see your wallpaper with ease. While this is obviously not for everyone it does make for a great visual trick. Portable Versions Perhaps you need this wonderful new version of Opera to go with you wherever you do during the day. Not a problem…just visit the Opera USB website to choose a version that works best for you. You can select from “Zip or Exe” setup files and if needed update an older portable version using a “Zipped Update Files Package”. If you are updating an older version keep in mind that you will need to delete the old “OperaUSB.exe. File” due to changes with the new setup files. During our tests updating older portable versions went well for the most part but we did experience a few “odd UI quirks” here and there…so we recommend setting up a clean install if possible. Conclusion The new 10.50 release is a pleasure to use and is a recommended install for your system. Whether you are considering trying Opera for the first time or have been using it for a bit we think that you will pleased with everything that the 10.50 release has to offer. For those who would like to add User Scripts to Opera be certain to look at our how-to article here. Links Download Opera 10.50 for your location (Windows) Get the latest Snapshot versions for Linux & Mac Sign up for an Opera Link account View In-Depth detail on Opera 10.50’s features Download the Z1-AV69 Aero Theme Download Portable Opera 10.50 Similar Articles Productive Geek Tips Set the Speed Dial as the Opera Startup PageSet Up User Scripts in Opera BrowserScan Files for Viruses Before You Download With Dr.WebTurn Your Computer into a File, Music, and Web Server with Opera UniteSet the Default Browser on Ubuntu From the Command Line TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

Read the article
Using Unity – Part 1

- by nmarun

I have been going through implementing some IoC pattern using Unity and so I decided to share my learnings (I know that’s not an English word, but you get the point). Ok, so I have an ASP.net project named ProductWeb and a class library called ProductModel. In the model library, I have a class called Product: 1: public class Product 2: { 3: public string Name { get; set; } 4: public string Description { get; set; } 5: 6: public Product() 7: { 8: Name = "iPad"; 9: Description = "Not just a reader!"; 10: } 11: 12: public string WriteProductDetails() 13: { 14: return string.Format("Name: {0} Description: {1}", Name, Description); 15: } 16: } In the Page_Load event of the default.aspx, I’ll need something like: 1: Product product = new Product(); 2: productDetailsLabel.Text = product.WriteProductDetails(); Now, let’s go ‘Unity’fy this application. I assume you have all the bits for the pattern. If not, get it from here. I found this schematic representation of Unity pattern from the above link. This image might not make much sense to you now, but as we proceed, things will get better. The first step to implement the Inversion of Control pattern is to create interfaces that your types will implement. An IProduct interface is added to the ProductModel project. 1: public interface IProduct 2: { 3: string WriteProductDetails(); 4: } Let’s make our Product class to implement the IProduct interface. The application will compile and run as before despite the changes made. Add the following references to your web project: Microsoft.Practices.Unity Microsoft.Practices.Unity.Configuration Microsoft.Practices.Unity.StaticFactory Microsoft.Practices.ObjectBuilder2 We need to add a few lines to the web.config file. The line below tells what version of Unity pattern we’ll be using. 1: <configSections> 2: <section name="unity" type="Microsoft.Practices.Unity.Configuration.UnityConfigurationSection, Microsoft.Practices.Unity.Configuration, Version=1.2.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> 3: </configSections> Add another block with the same name as the section name declared above – ‘unity’. 1: <unity> 2: <typeAliases> 3:  4: <typeAlias alias="IProduct" type="ProductModel.IProduct, ProductModel"/> 5: <typeAlias alias="Product" type="ProductModel.Product, ProductModel"/> 6: </typeAliases> 7: <containers> 8: <container name="unityContainer"> 9: <types> 10: <type type="IProduct" mapTo="Product"/> 11: </types> 12: </container> 13: </containers> 14: </unity> From the Unity Configuration schematic shown above, you see that the ‘unity’ block has a ‘typeAliases’ and a ‘containers’ segment. The typeAlias element gives a ‘short-name’ for a type. This ‘short-name’ can be used to point to this type any where in the configuration file (web.config in our case, but all this information could be coming from an external xml file as well). The container element holds all the mapping information. This container is referenced through its name attribute in the code and you can have multiple of these container elements in the containers segment. The ‘type’ element in line 10 basically says: ‘When Unity requests to resolve the alias IProduct, return an instance of whatever the short-name of Product points to’. This is the most basic piece of Unity pattern and all of this is accomplished purely through configuration. So, in future you have a change in your model, all you need to do is - implement IProduct on the new model class and - either add a typeAlias for the new type and point the mapTo attribute to the new alias declared - or modify the mapTo attribute of the type element to point to the new alias (as the case may be). Now for the calling code. It’s a good idea to store your unity container details in the Application cache, as this is rarely bound to change and also adds for better performance. The Global.asax.cs file comes for our rescue: 1: protected void Application_Start(object sender, EventArgs e) 2: { 3: // create and populate a new Unity container from configuration 4: IUnityContainer unityContainer = new UnityContainer(); 5: UnityConfigurationSection section = (UnityConfigurationSection)ConfigurationManager.GetSection("unity"); 6: section.Containers["unityContainer"].Configure(unityContainer); 7: Application["UnityContainer"] = unityContainer; 8: } 9: 10: protected void Application_End(object sender, EventArgs e) 11: { 12: Application["UnityContainer"] = null; 13: } All this says is: create an instance of UnityContainer() and read the ‘unity’ section from the configSections segment of the web.config file. Then get the container named ‘unityContainer’ and store it in the Application cache. In my code-behind file, I’ll make use of this UnityContainer to create an instance of the Product type. 1: public partial class _Default : Page 2: { 3: private IUnityContainer unityContainer; 4: protected void Page_Load(object sender, EventArgs e) 5: { 6: unityContainer = Application["UnityContainer"] as IUnityContainer; 7: if (unityContainer == null) 8: { 9: productDetailsLabel.Text = "ERROR: Unity Container not populated in Global.asax.<p />"; 10: } 11: else 12: { 13: IProduct productInstance = unityContainer.Resolve<IProduct>(); 14: productDetailsLabel.Text = productInstance.WriteProductDetails(); 15: } 16: } 17: } Looking the ‘else’ block, I’m asking the unityContainer object to resolve the IProduct type. All this does, is to look at the matching type in the container, read its mapTo attribute value, get the full name from the alias and create an instance of the Product class. Fabulous!! I’ll go more in detail in the next blog. The code for this blog can be found here.

Read the article
Tips on installing Visual Studio 2010 SP1

- by Jon Galloway

Visual Studio SP1 went up on MSDN downloads (here) on March 8, and will be released publicly on March 10 here. Release announcements: Soma: Visual Studio 2010 enhancements Jason Zander: Announcing Visual Studio 2010 Service Pack 1 I started on this post with tips on installing VS2010 SP1 when I realized I’ve been writing these up for Visual Studio and .NET framework SP releases for a while (e.g. VS2008 / .NET 3.5 SP1 post, VS2005 SP1 post). Looking back the years of Visual Studio SP installs (and remembering when we’d get up to SP6 for a Visual Studio release), I’m happy to see that it just keeps getting easier. Service Packs are a lot less finicky about requiring beta software to be uninstalled, install more quickly, and are just generally a lot less scary. If I can’t have a jetpack, at least my future provided me faster, easier service packs. Disclaimer: These tips are just general things I've picked up over the years. I don't have any inside knowledge here. If you see anything wrong, be sure to let me know in the comments. You may want to check the readme file before installing - it's short, and it's in that new-fangled HTML format. On with the tips! Before starting, uninstall Visual Studio features you don't use Visual Studio service packs (and other Microsoft service packs as well) install patches for the specific features you’ve got installed. This is a big reason to always do a custom install when you first install Visual Studio, but it’s not difficult to update your existing installation. Here’s the quick way to do that: Tap the windows key and type “add or remove programs” and press enter (or click on the “Add or remove programs” link if you must). Type “Visual Studio 2010” in the search box in the upper right corner, click on the Visual Studio program (the one with the VS infinity looking logo) and click on Uninstall/Change. Click on Add or Remove Features The next part’s up to you – what features do you actually use? I’ve been doing primarily ASP.NET MVC development in C# lately, so I selected Visual C# and Visual Web Developer. Remember that you can install features later if needed, and can also install the express versions if you want. Selecting everything just because it’s there - or you paid for it – means that you install updates for everything, every time. When you’ve made your changes, click on the Update button to uninstall unused features. Shut down all instances of Visual Studio It probably goes without saying that you should close a program down before installing it, partly to avoid the file-in-use-reboot-after-install horror. Additional "hunch / works on my machine" quality tip: On one computer I saw a note in the setup log about Visual Studio a prompt for user input to close Visual Studio, although I never saw the prompt. Just to be sure, I'd personally open up Task Manager and kill any devenv.exe processes I saw running, as it couldn't hurt. Use the web installer I use the Web Installers whenever possible. There’s no point in downloading the DVD unless you’re doing multiple installs or won’t have internet access. The DVD IS is 1.5GB, since it needs to be able to service every possible supported installation option on both x86 and x64. The web installer is 776 KB (smaller than calc.exe), so you can start the installation right away. Like other web installers, the real benefit is that it only installs the updates you need (hence the reason for step 1 – uninstalling unused components). Instead of 1.5GB, my download was roughly 530MB. If you’re installing from MSDN (this link takes you right to the Visual Studio installs), select the first one on the list: The first step in the installation process is to analyze the machine configuration and tell you what needs to be installed. Since I've trimmed down my features, that's a pretty short list. The time's not far off where I may not install SQL Server on my dev machines, just using SQL Server Compact - that would shorten the list further. When I hit next, you can see that the download size has shrunk considerably. When I start the install, note that the installation begins while other components are downloading - another benefit of the web install. On my mid-range desktop machine, the install took 25 minutes. What if it takes longer? According to Heath Stewart (Visual Studio installer guru), average SP1 installs take roughly 45 minutes. An installation which takes hours to complete may be a sign of a problem: see his post Visual Studio 2010 Service Pack 1 installing for over 2 hours could be a sign of a problem. Why so long? Yes, even 25 minutes is a while. Heath's got another blog post explaining why the update can take longer than the initial install (see: A patch may take as long or longer to install than the target product) which explains all the additional steps and complexities a patch needs to deal with, as well as some mitigation steps that deployment authors can take to mitigate the impact. Other things to know about Visual Studio 2010 SP1 Installs over Visual Studio 2010 SP1 Beta That's nice. Previous Visual Studio versions did a number of annoying things when you installed SP's over beta's - fail with weird errors, get part way through and tell you needed to cancel and uninstall first, etc. I've installed this on two machines that had random beta stuff installed without tears. That Readme file you didn't read I mentioned the readme file earlier (http://go.microsoft.com/fwlink/?LinkId=210711 ). Some interesting things I picked up in there: 2.1.3. Visual Studio 2010 Service Pack 1 installation may fail when a USB drive or other removeable drive is connected 2.1.4. Visual Studio must be restarted after Visual Studio 2010 SP1 tooling for SQL Server Compact (Compact) 4.0 is installed 2.2.1. If Visual Studio 2010 Service Pack 1 is uninstalled, Visual Studio 2010 must be reinstalled to restore certain components 2.2.2. If Visual Studio 2010 Service Pack 1 is uninstalled, Visual Studio 2010 must be reinstalled before SP1 can be installed again 2.4.3.1. Async CTP If you installed the pre-SP1 version of Async CTP but did not uninstall it before you installed Visual Studio 2010 SP1, then your computer will be in a state in which the version of the C# compiler in the .NET Framework does not match the C# compiler in Visual Studio. To resolve this issue: After you install Visual Studio 2010 SP1, reinstall the SP1 version of the Async CTP from here. Hardware acceleration for Visual Studio is disabled on Windows XP Visual Studio 2010 SP1 disables hardware acceleration when running on Windows XP (only on XP). You can turn it back on in the Visual Studio options, under Environment / General, as shown below. See Jason Zander's post titled Performance Troubleshooting Article and VS2010 SP1 Change.

Read the article
Behind ASP.NET MVC Mock Objects

- by imran_ku07

Introduction: I think this sentence now become very familiar to ASP.NET MVC developers that "ASP.NET MVC is designed with testability in mind". But what ASP.NET MVC team did for making applications build with ASP.NET MVC become easily testable? Understanding this is also very important because it gives you some help when designing custom classes. So in this article i will discuss some abstract classes provided by ASP.NET MVC team for the various ASP.NET intrinsic objects, including HttpContext, HttpRequest, and HttpResponse for making these objects as testable. I will also discuss that why it is hard and difficult to test ASP.NET Web Forms. Description: Starting from Classic ASP to ASP.NET MVC, ASP.NET Intrinsic objects is extensively used in all form of web application. They provide information about Request, Response, Server, Application and so on. But ASP.NET MVC uses these intrinsic objects in some abstract manner. The reason for this abstraction is to make your application testable. So let see the abstraction. As we know that ASP.NET MVC uses the same runtime engine as ASP.NET Web Form uses, therefore the first receiver of the request after IIS and aspnet_filter.dll is aspnet_isapi.dll. This will start the application domain. With the application domain up and running, ASP.NET does some initialization and after some initialization it will call Application_Start if it is defined. Then the normal HTTP pipeline event handlers will be executed including both HTTP Modules and global.asax event handlers. One of the HTTP Module is registered by ASP.NET MVC is UrlRoutingModule. The purpose of this module is to match a route defined in global.asax. Every matched route must have IRouteHandler. In default case this is MvcRouteHandler which is responsible for determining the HTTP Handler which returns MvcHandler (which is derived from IHttpHandler). In simple words, Route has MvcRouteHandler which returns MvcHandler which is the IHttpHandler of current request. In between HTTP pipeline events the handler of ASP.NET MVC, MvcHandler.ProcessRequest will be executed and shown as given below, void IHttpHandler.ProcessRequest(HttpContext context) { this.ProcessRequest(context); } protected virtual void ProcessRequest(HttpContext context) { // HttpContextWrapper inherits from HttpContextBase HttpContextBase ctxBase = new HttpContextWrapper(context); this.ProcessRequest(ctxBase); } protected internal virtual void ProcessRequest(HttpContextBase ctxBase) { . . . } HttpContextBase is the base class. HttpContextWrapper inherits from HttpContextBase, which is the parent class that include information about a single HTTP request. This is what ASP.NET MVC team did, just wrap old instrinsic HttpContext into HttpContextWrapper object and provide opportunity for other framework to provide their own implementation of HttpContextBase. For example public class MockHttpContext : HttpContextBase { . . . } As you can see, it is very easy to create your own HttpContext. That's what did the third party mock frameworks like TypeMock, Moq, RhinoMocks, or NMock2 to provide their own implementation of ASP.NET instrinsic objects classes. The key point to note here is the types of ASP.NET instrinsic objects. In ASP.NET Web Form and ASP.NET MVC. For example in ASP.NET Web Form the type of Request object is HttpRequest (which is sealed) and in ASP.NET MVC the type of Request object is HttpRequestBase. This is one of the reason that makes test in ASP.NET WebForm is difficult. because their is no base class and the HttpRequest class is sealed, therefore it cannot act as a base class to others. On the other side ASP.NET MVC always uses a base class to give a chance to third parties and unit test frameworks to create thier own implementation ASP.NET instrinsic object. Therefore we can say that in ASP.NET MVC, instrinsic objects are of type base classes (for example HttpContextBase) .Actually these base classes had it's own implementation of same interface as the intrinsic objects it abstracts. It includes only virtual members which simply throws an exception. ASP.NET MVC also provides the corresponding wrapper classes (for example, HttpRequestWrapper) which provides a concrete implementation of the base classes in the form of ASP.NET intrinsic object. Other wrapper classes may be defined by third parties in the form of a mock object for testing purpose. So we can say that a Request object in ASP.NET MVC may be HttpRequestWrapper or may be MockRequestWrapper(assuming that MockRequestWrapper class is used for testing purpose). Here is list of ASP.NET instrinsic and their implementation in ASP.NET MVC in the form of base and wrapper classes. Base Class Wrapper Class ASP.NET Intrinsic Object Description HttpApplicationStateBase HttpApplicationStateWrapper Application HttpApplicationStateBase abstracts the intrinsic Application object HttpBrowserCapabilitiesBase HttpBrowserCapabilitiesWrapper HttpBrowserCapabilities HttpBrowserCapabilitiesBase abstracts the HttpBrowserCapabilities class HttpCachePolicyBase HttpCachePolicyWrapper HttpCachePolicy HttpCachePolicyBase abstracts the HttpCachePolicy class HttpContextBase HttpContextWrapper HttpContext HttpContextBase abstracts the intrinsic HttpContext object HttpFileCollectionBase HttpFileCollectionWrapper HttpFileCollection HttpFileCollectionBase abstracts the HttpFileCollection class HttpPostedFileBase HttpPostedFileWrapper HttpPostedFile HttpPostedFileBase abstracts the HttpPostedFile class HttpRequestBase HttpRequestWrapper Request HttpRequestBase abstracts the intrinsic Request object HttpResponseBase HttpResponseWrapper Response HttpResponseBase abstracts the intrinsic Response object HttpServerUtilityBase HttpServerUtilityWrapper Server HttpServerUtilityBase abstracts the intrinsic Server object HttpSessionStateBase HttpSessionStateWrapper Session HttpSessionStateBase abstracts the intrinsic Session object HttpStaticObjectsCollectionBase HttpStaticObjectsCollectionWrapper HttpStaticObjectsCollection HttpStaticObjectsCollectionBase abstracts the HttpStaticObjectsCollection class Summary: ASP.NET MVC provides a set of abstract classes for ASP.NET instrinsic objects in the form of base classes, allowing someone to create their own implementation. In addition, ASP.NET MVC also provide set of concrete classes in the form of wrapper classes. This design really makes application easier to test and even application may replace concrete implementation with thier own implementation, which makes ASP.NET MVC very flexable.

Read the article
CodePlex Daily Summary for Friday, February 19, 2010

CodePlex Daily Summary for Friday, February 19, 2010New ProjectsApplication Management Library: Application Management makes your application life easier. It will automatic do memory management, handle and log unhandled exceptions, profiling y...Audio Service - Play Wave Files From Windows Service: This is a windows service that Check a registry key, when the key is updated with a new wave file path the service plays the wave file.Aviamodels: 3d drawing AviamodelsControl of payment proofs program for Greek citizens: This is a program that is used for Greek citizens who want to keep track of their payment proofs.Cover Creator: Cover Creator gives you the possibility to create and print CD covers. Content of CD is taken from http://www.freedb.org/ or can be added/modyfied ...DevBoard: DevBoard is a webbased scrum tool that helps developers/team get a clear overview of the project progress. It's developed in C# and silverlight.Flex AdventureWorks: The is mostly a skunk-works application to help me get acclimated to CodePlex. The long term goal is to integrate a Flex UI with the AdventureWor...GRE Wordlist: An intuitive and customizable word list for GRE aspirants. Developed in Java using a word list similar to Barron's.Indexer: A desktop file Index and Search tool which allows you to choose a list of folders to index, and then search on later. It is based on Lucene.net an...Project Management Office (PMO) for SharePoint: Sample web part for the Code Mastery event in Boston, February 11, 2010.Restart SQL Audit Policy and Job: Resolve SQL 2008 Audit Network Connectivity Issue.Rounded Corners / DIV Container: The RoundedDiv round corners container is a skin-able, CSS compliant UI control. Select which corners should be rounded, collapse and expand the c...Silverlight Google Search Application: The Silverlight Google Search Application uses Google Search API and behaves like Internet Search Application with option to preview desired page i...Weather Forecast Control: MyWeather forecast control pulls up to date weather forecast information from The Weather Channel for your website.New ReleasesApplication Management Library: ApplicationManagement v1.0: First ReleaseAudio Service - Play Wave Files From Windows Service: Audio Service v1.0: This is a working version of the Audio Service. Please use as you need to.AutoMapper: 1.0.1 for Silverlight 3.0 Alpha: AutoMapper for Silverlight 3.0. Features not supported: IDataReader mapping IListSource mapping All other features are supported.Buzz Dot Net: Buzz Dot Net v.1.10219: Buzz Dot Net Library (Parser & Objects) + WPF Example (using MVVM & Threading)Canvas VSDOC Intellisense: V 1.0.0.0a: This release contains two JavaScript files: canvas-utils.js (can be referenced in both runtime and development environment) canvas-vsdoc.js (must ...Control of payment proofs program for Greek citizens: Payment Proofs: source codeCourier: Beta 2: Added Rx Framework support and re-factored how message registration and un-registration works Blog post explaining the updates and re-factoring c...Cover Creator: Initial release: This is initial stable release. For now only in Polish language.Employee Scheduler: Employee Scheduler 2.2: Small Bug found. Small total hour calculation bug. See http://employeescheduler.codeplex.com/WorkItem/View.aspx?WorkItemId=6059 Extract the files...EnhSim: Release v1.9.7.1: Release v1.9.7.1Implemented Dislodged Foreign Object trinket Whispering Fanged Skull now also procs off Flame shock dots You can toggle bloodlust o...Extend SmallBasic: Teaching Extensions v.007: added SimpleSquareTest added Tortoise.Approve() for virtual proctor how to use virtual proctor: change the path in the proctor.txt file (located i...FolderSize: FolderSize.Win32.1.0.1.0: FolderSize.Win32.1.0.1.0 A simple utility intended to be used to scan harddrives for the folders that take most place and display this to the user...GLB Virtual Player Builder: v0.4.0 Beta: Allows for user to import and use archetypes for building players. The archetypes are contained in the file "archetypes.xml". This file is editab...Google Map WebPart from SharePoint List: GMap Stable Release: GMap Stable ReleaseHenge3D Physics Library for XNA: Henge3D Source (2010-02 R2): Fixed a build error related to an assembly attribute in XBOX 360 builds. Tweaked the controls in the sample when targeting the 360. Reduced the...Indexer: Beta Release 1: Just the initial/rough cut.NukeCS: NukeCS 5.2.3 Source Code: update version to 5.2.3ODOS: ODOS STABLE 1.5.0: Thank you for your patience while we develop this version. Not that much has been added, though. Just doing some sub-conscious stuff to make life...PoshBoard: PoshBoard 3.0 Beta 1: Welcome to the first beta release of PoshBoard 3.0 ! IMPORTANT WARNING : this release is absolutly not feature complete and is error-prone. Okay, ...Restart SQL Audit Policy and Job: Restart SQL 2008 Audit Policy and Job: This folder contains three pieces of source code: Server Audit Status (Started).xml - Import this on-schedule policy into your server's Policy-Ba...SAL- Self Artificial Learning: Artificial Learning 2AQV Working Proof Of Concept: This is the Simulation proof of concept version that comes after the 1aq version. AQ stands for Anwering Questions.SharePoint 2010 Word Automation: SP 2010 Word Automation - Workflow Actions 1.1: This release includes two new custom workflow activities for SharePoint designer Convert Folder Convert Library More information about these new...SharePoint Outlook Connector: Version 1.0.1.1: Exception Logging has been improved.Sharpy: Sharpy 1.2 Alpha: This is the third Sharpy release. A change has been made to allow overriding the master page from the controller. The release contains the single ...Silverlight Google Search Application: SL Google Search App Alpha: This is just a first alpha version of the application, as it looks like when I uploaded it to CodePlex. The application works, requires Silverlight...Starter Kit Mytrip.Mvc.Entity: Mytrip.Mvc.Entity 1.0 RC: EF Membership UserManager FileManager Localization Captcha ClientValidation Theme CrossBrowser VS 2010 RC MVC 2 RC db MSSQL2008thinktecture WSCF.blue: WSCF.blue V1 Update (1.0.6): This release is an update for WSCF.blue V1. Below are the bug fixes made since the V1.0.5 release: The data contract type filter was not including...TS3QueryLib.Net: TS3QueryLib.Net Version 0.18.13.0: Changelog Added overloads to all methods of QueryRunenr class handling permission tasks to allow passing of permission name instead of permissionid...Umbraco CMS: Umbraco 4.1 Beta 2: This is the second beta of Umbraco 4.1. Umbraco 4.1 is more advanced than ever, yet faster, lighter and simpler to use than ever. We, on behalf of...VCC: Latest build, v2.1.30218.0: Automatic drop of latest buildZack's Fiasco - Code Generated DAL: v1.2.4: Enhancements: SQL Server CRUD Stored Procedures added option for USE <db> added option to create or not create INSERT sprocs added option to cr...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Image Resizer Powertoy Clone for WindowsASP.NETMicrosoft SQL Server Community & SamplesDotNetNuke® Community EditionMost Active ProjectsRawrSharpyDinnerNow.netBlogEngine.NETjQuery Library for SharePoint Web ServicesNB_Store - Free DotNetNuke Ecommerce Catalog Modulepatterns & practices – Enterprise LibraryPHPExcelFacebook Developer ToolkitFluent Ribbon Control Suite

Read the article
Setting up and using Bing Translate API Service for Machine Translation

- by Rick Strahl

Last week I spent quite a bit of time trying to set up the Bing Translate API service. I can honestly say this was one of the most screwed up developer experiences I've had in a long while - specifically related to the byzantine sign up process that Microsoft has in place. Not only is it nearly impossible to find decent documentation on the required signup process, some of the links in the docs are just plain wrong, and some of the account pages you need to access the actual account information once signed up are not linked anywhere from the administration UI. To make things even harder is the fact that the APIs changed a while back, with a completely new authentication scheme that's described and not directly linked documentation topic also made for a very frustrating search experience. It's a bummer that this is the case too, because the actual API itself is easy to use and works very well - fast and reasonably accurate (as accurate as you can expect machine translation to be). But the sign up process is a pain in the ass doubtlessly leaving many people giving up in frustration. In this post I'll try to hit all the points needed to set up to use the Bing Translate API in one place since such a document seems to be missing from Microsoft. Hopefully the API folks at Microsoft will get their shit together and actually provide this sort of info on their site… Signing Up The first step required is to create a Windows Azure MarketPlace account. Go to: https://datamarket.azure.com/ Sign in with your Windows Live Id If you don't have an account you will be taken to a registration page which you have to fill out. Follow the links and complete the registration. Once you're signed in you can start adding services. Click on the Data Link on the main page Select Microsoft Translator from the list This adds the Microsoft Bing Translator to your services. Pricing The page shows the pricing matrix and the free service which provides 2 megabytes for translations a month for free. Prices go up steeply from there. Pricing is determined by actual bytes of the result translations used. Max translations are 1000 characters so at minimum this means you get around 2000 translations a month for free. However most translations are probable much less so you can expect larger number of translations to go through. For testing or low volume translations this should be just fine. Once signed up there are no further instructions and you're left in limbo on the MS site. Register your Application Once you've created the Data association with Translator the next step is registering your application. To do this you need to access your developer account. Go to https://datamarket.azure.com/developer/applications/register Provide a ClientId, which is effectively the unique string identifier for your application (not your customer id!) Provide your name The client secret was auto-created and this becomes your 'password' For the redirect url provide any https url: https://microsoft.com works Give this application a description of your choice so you can identify it in the list of apps Now, once you've registered your application, keep track of the ClientId and ClientSecret - those are the two keys you need to authenticate before you can call the Translate API. Oddly the applications page is hidden from the Azure Portal UI. I couldn't find a direct link from anywhere on the site back to this page where I can examine my developer application keys. To find them you can go to: https://datamarket.azure.com/developer/applications You can come back here to look at your registered applications and pick up the ClientID and ClientSecret. Fun eh? But we're now ready to actually call the API and do some translating. Using the Bing Translate API The good news is that after this signup hell, using the API is pretty straightforward. To use the translation API you'll need to actually use two services: You need to call an authentication API service first, before you can call the actual translator API. These two APIs live on different domains, and the authentication API returns JSON data while the translator service returns XML. So much for consistency. Authentication The first step is authentication. The service uses oAuth authentication with a bearer token that has to be passed to the translator API. The authentication call retrieves the oAuth token that you can then use with the translate API call. The bearer token has a short 10 minute life time, so while you can cache it for successive calls, the token can't be cached for long periods. This means for Web backend requests you typically will have to authenticate each time unless you build a more elaborate caching scheme that takes the timeout into account (perhaps using the ASP.NET Cache object). For low volume operations you can probably get away with simply calling the auth API for every translation you do. To call the Authentication API use code like this:/// /// Retrieves an oAuth authentication token to be used on the translate /// API request. The result string needs to be passed as a bearer token /// to the translate API. /// /// You can find client ID and Secret (or register a new one) at: /// https://datamarket.azure.com/developer/applications/ /// /// The client ID of your application /// The client secret or password /// public string GetBingAuthToken(string clientId = null, string clientSecret = null) { string authBaseUrl = https://datamarket.accesscontrol.windows.net/v2/OAuth2-13; if (string.IsNullOrEmpty(clientId) || string.IsNullOrEmpty(clientSecret)) { ErrorMessage = Resources.Resources.Client_Id_and_Client_Secret_must_be_provided; return null; } var postData = string.Format("grant_type=client_credentials&client_id={0}" + "&client_secret={1}" + "&scope=http://api.microsofttranslator.com", HttpUtility.UrlEncode(clientId), HttpUtility.UrlEncode(clientSecret)); // POST Auth data to the oauth API string res, token; try { var web = new WebClient(); web.Encoding = Encoding.UTF8; res = web.UploadString(authBaseUrl, postData); } catch (Exception ex) { ErrorMessage = ex.GetBaseException().Message; return null; } var ser = new JavaScriptSerializer(); var auth = ser.Deserialize<BingAuth>(res); if (auth == null) return null; token = auth.access_token; return token; } private class BingAuth { public string token_type { get; set; } public string access_token { get; set; } } This code basically takes the client id and secret and posts it at the oAuth endpoint which returns a JSON string. Here I use the JavaScript serializer to deserialize the JSON into a custom object I created just for deserialization. You can also use JSON.NET and dynamic deserialization if you are already using JSON.NET in your app in which case you don't need the extra type. In my library that houses this component I don't, so I just rely on the built in serializer. The auth method returns a long base64 encoded string which can be used as a bearer token in the translate API call. Translation Once you have the authentication token you can use it to pass to the translate API. The auth token is passed as an Authorization header and the value is prefixed with a 'Bearer ' prefix for the string. Here's what the simple Translate API call looks like:/// /// Uses the Bing API service to perform translation /// Bing can translate up to 1000 characters. /// /// Requires that you provide a CLientId and ClientSecret /// or set the configuration values for these two. /// /// More info on setup: /// http://www.west-wind.com/weblog/ /// /// Text to translate /// Two letter culture name /// Two letter culture name /// Pass an access token retrieved with GetBingAuthToken. /// If not passed the default keys from .config file are used if any /// public string TranslateBing(string text, string fromCulture, string toCulture, string accessToken = null) { string serviceUrl = "http://api.microsofttranslator.com/V2/Http.svc/Translate"; if (accessToken == null) { accessToken = GetBingAuthToken(); if (accessToken == null) return null; } string res; try { var web = new WebClient(); web.Headers.Add("Authorization", "Bearer " + accessToken); string ct = "text/plain"; string postData = string.Format("?text={0}&from={1}&to={2}&contentType={3}", HttpUtility.UrlEncode(text), fromCulture, toCulture, HttpUtility.UrlEncode(ct)); web.Encoding = Encoding.UTF8; res = web.DownloadString(serviceUrl + postData); } catch (Exception e) { ErrorMessage = e.GetBaseException().Message; return null; } // result is a single XML Element fragment var doc = new XmlDocument(); doc.LoadXml(res); return doc.DocumentElement.InnerText; } The first of this code deals with ensuring the auth token exists. You can either pass the token into the method manually or let the method automatically retrieve the auth code on its own. In my case I'm using this inside of a Web application and in that situation I simply need to re-authenticate every time as there's no convenient way to manage the lifetime of the auth cookie. The auth token is added as an Authorization HTTP header prefixed with 'Bearer ' and attached to the request. The text to translate, the from and to language codes and a result format are passed on the query string of this HTTP GET request against the Translate API. The translate API returns an XML string which contains a single element with the translated string. Using the Wrapper Methods It should be pretty obvious how to use these two methods but here are a couple of test methods that demonstrate the two usage scenarios:[TestMethod] public void TranslateBingWithAuthTest() { var translate = new TranslationServices(); string clientId = DbResourceConfiguration.Current.BingClientId; string clientSecret = DbResourceConfiguration.Current.BingClientSecret; string auth = translate.GetBingAuthToken(clientId, clientSecret); Assert.IsNotNull(auth); string text = translate.TranslateBing("Hello World we're back home!", "en", "de",auth); Assert.IsNotNull(text, translate.ErrorMessage); Console.WriteLine(text); } [TestMethod] public void TranslateBingIntegratedTest() { var translate = new TranslationServices(); string text = translate.TranslateBing("Hello World we're back home!","en","de"); Assert.IsNotNull(text, translate.ErrorMessage); Console.WriteLine(text); } Other API Methods The Translate API has a number of methods available and this one is the simplest one but probably also the most common one that translates a single string. You can find additional methods for this API here: http://msdn.microsoft.com/en-us/library/ff512419.aspx Soap and AJAX APIs are also available and documented on MSDN: http://msdn.microsoft.com/en-us/library/dd576287.aspx These links will be your starting points for calling other methods in this API. Dual Interface I've talked about my database driven localization provider here in the past, and it's for this tool that I added the Bing localization support. Basically I have a localization administration form that allows me to translate individual strings right out of the UI, using both Google and Bing APIs: As you can see in this example, the results from Google and Bing can vary quite a bit - in this case Google is stumped while Bing actually generated a valid translation. At other times it's the other way around - it's pretty useful to see multiple translations at the same time. Here I can choose from one of the values and driectly embed them into the translated text field. Lost in Translation There you have it. As I mentioned using the API once you have all the bureaucratic crap out of the way calling the APIs is fairly straight forward and reasonably fast, even if you have to call the Auth API for every call. Hopefully this post will help out a few of you trying to navigate the Microsoft bureaucracy, at least until next time Microsoft upends everything and introduces new ways to sign up again. Until then - happy translating… Related Posts Translation method Source on Github Translating with Google Translate without Google API Keys Creating a data-driven ASP.NET Resource Provider© Rick Strahl, West Wind Technologies, 2005-2013Posted in Localization ASP.NET .NET Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article
Security Trimmed Cross Site Collection Navigation

- by Sahil Malik

Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). This article will serve as documentation of a fully functional codeplex project that I just created. This project will give you a WebPart that will give you security trimmed navigation across site collections. The first question is, why create such a project? In every single SharePoint project you will do, one question you will always be faced with is, what should the boundaries of sites be, and what should the boundaries of site collections be? There is no good or bad answer to this, because it really really depends on your needs. There are some factors in play here. Site Collections will allow you to scale, as a Site collection is the smallest entity you can put inside a content database Site collections will allow you to offer different levels of SLAs, because you put a site collection on a separate content database, and put that database on a separate server. Site collections are a security boundary – and they can be moved around at will without affecting other site collections. Site collections are also a branding boundary. They are also a feature deployment boundary, so you can have two site collections on the same web application with completely different nature of services. But site collections break navigation, i.e. a site collection at “/”, and a site collection at “/sites/mySiteCollection”, are completely independent of each other. If you have access to both, the navigation of / won’t show you a link to /sites/mySiteCollection. Some people refer to this as a huge issue in SharePoint. Luckily, some workarounds exist. A long time ago, I had blogged about “Implementing Consistent Navigation across Site Collections”. That approach was a no-code solution, it worked – it gave you a consistent navigation across site collections. But, it didn’t work in a security trimmed fashion! i.e., if I don’t have access to Site Collection ‘X’, it would still show me a link to ‘X’. Well this project gets around that issue. Simply deploy this project, and it’ll give you a WebPart. You can use that WebPart as either a webpart or as a server control dropped via SharePoint designer, and it will give you Security Trimmed Cross Site Collection Navigation. The code has been written for SP2010, but it will work in SP2007 with the help of http://spwcfsupport.codeplex.com . What do I need to do to make it work? I’m glad you asked! Simple! Deploy the .wsp (which you can download here). This will give you a site collection feature called “Winsmarts Cross Site Collection Navigation” as shown below. Go ahead and activate it, and this will give you a WebPart called “Winsmarts Navigation Web Part” as shown below: Just drop this WebPart on your page, and it will show you all site collections that the currently logged in user has access to. Really it’s that easy! This is shown as below - In the above example, I have two site collections that I created at /sites/SiteCollection1 and /sites/SiteCollection2. The navigation shows the titles. You see some extraneous crap as well, you might want to clean that – I’ll talk about that in a minute. What? You’re running into problems? If the problem you’re running into is that you are prompted to login three times, and then it shows a blank webpart that says “Loading your applications ..” and then craps out!, then most probably you’re using a different authentication scheme. Behind the scenes I use a custom WCF service to perform this job. OOTB, I’ve set it to work with NTLM, but if you need to make it work alternate authentications such as forms based auth, or client side certs, you will need to edit the %14%\ISAPI\Winsmarts.CrossSCNav\web.config file, specifically, this section - 1: <bindings> 2: <webHttpBinding> 3: <binding name="customWebHttpBinding"> 4: <security mode="TransportCredentialOnly"> 5: <transport clientCredentialType="Ntlm"/> 6: </security> 7: </binding> 8: </webHttpBinding> 9: </bindings> For Kerberos, change the “clientCredentialType” to “Windows” For Forms auth, remove that transport line For client certs – well that’s a bit more involved, but it’s just web.config changes – hit a good book on WCF or hire me for a billion trillion $. But fair warning, I might be too busy to help immediately. If you’re running into a different problem, please leave a comment below, but the code is pretty rock solid, so .. hmm .. check what you’re doing! BTW, I don’t make any guarantee/warranty on this – if this code makes you sterile, unpopular, bad hairstyle, anything else, that is your problem! But, there are some known issues - I wrote this as a concept – you can easily extend it to be more flexible. Example, hierarchical nav, or, horizontal nav, jazzy effects with jquery or silverlight– all those are possible very very easily. This webpart is not smart enough to co-exist with another instance of itself on the same page. I can easily extend it to do so, which I will do in my spare(!?) time! Okay good! But that’s not all! As you can see, just dropping the WebPart may show you many extraneous site collections, or maybe you want to restrict which site collections are shown, or exclude a certain site collection to be shown from the navigation. To support that, I created a property on the WebPart called “UrlMatchPattern”, which is a regex expression you specify to trim the results :). So, just edit the WebPart, and specify a string property of “http://sp2010/sites/” as shown below. Note that you can put in whatever regex expression you want! So go crazy, I don’t care! And this gives you a cleaner look. w00t! Enjoy! Comment on the article ....

Read the article
Securing an ASP.NET MVC 2 Application

- by rajbk

This post attempts to look at some of the methods that can be used to secure an ASP.NET MVC 2 Application called Northwind Traders Human Resources. The sample code for the project is attached at the bottom of this post. We are going to use a slightly modified Northwind database. The screen capture from SQL server management studio shows the change. I added a new column called Salary, inserted some random salaries for the employees and then turned off AllowNulls. The reporting relationship for Northwind Employees is shown below. The requirements for our application are as follows: Employees can see their LastName, FirstName, Title, Address and Salary Employees are allowed to edit only their Address information Employees can see the LastName, FirstName, Title, Address and Salary of their immediate reports Employees cannot see records of non immediate reports. Employees are allowed to edit only the Salary and Title information of their immediate reports. Employees are not allowed to edit the Address of an immediate report Employees should be authenticated into the system. Employees by default get the “Employee” role. If a user has direct reports, they will also get assigned a “Manager” role. We use a very basic empId/pwd scheme of EmployeeID (1-9) and password test$1. You should never do this in an actual application. The application should protect from Cross Site Request Forgery (CSRF). For example, Michael could trick Steven, who is already logged on to the HR website, to load a page which contains a malicious request. where without Steven’s knowledge, a form on the site posts information back to the Northwind HR website using Steven’s credentials. Michael could use this technique to give himself a raise :-) UI Notes The layout of our app looks like so: When Nancy (EmpID 1) signs on, she sees the default page with her details and is allowed to edit her address. If Nancy attempts to view the record of employee Andrew who has an employeeID of 2 (Employees/Edit/2), she will get a “Not Authorized” error page. When Andrew (EmpID 2) signs on, he can edit the address field of his record and change the title and salary of employees that directly report to him. Implementation Notes All controllers inherit from a BaseController. The BaseController currently only has error handling code. When a user signs on, we check to see if they are in a Manager role. We then create a FormsAuthenticationTicket, encrypt it (including the roles that the employee belongs to) and add it to a cookie. private void SetAuthenticationCookie(int employeeID, List<string> roles) { HttpCookiesSection cookieSection = (HttpCookiesSection) ConfigurationManager.GetSection("system.web/httpCookies"); AuthenticationSection authenticationSection = (AuthenticationSection) ConfigurationManager.GetSection("system.web/authentication"); FormsAuthenticationTicket authTicket = new FormsAuthenticationTicket( 1, employeeID.ToString(), DateTime.Now, DateTime.Now.AddMinutes(authenticationSection.Forms.Timeout.TotalMinutes), false, string.Join("|", roles.ToArray())); String encryptedTicket = FormsAuthentication.Encrypt(authTicket); HttpCookie authCookie = new HttpCookie(FormsAuthentication.FormsCookieName, encryptedTicket); if (cookieSection.RequireSSL || authenticationSection.Forms.RequireSSL) { authCookie.Secure = true; } HttpContext.Current.Response.Cookies.Add(authCookie); } We read this cookie back in Global.asax and set the Context.User to be a new GenericPrincipal with the roles we assigned earlier. protected void Application_AuthenticateRequest(Object sender, EventArgs e){ if (Context.User != null) { string cookieName = FormsAuthentication.FormsCookieName; HttpCookie authCookie = Context.Request.Cookies[cookieName]; if (authCookie == null) return; FormsAuthenticationTicket authTicket = FormsAuthentication.Decrypt(authCookie.Value); string[] roles = authTicket.UserData.Split(new char[] { '|' }); FormsIdentity fi = (FormsIdentity)(Context.User.Identity); Context.User = new System.Security.Principal.GenericPrincipal(fi, roles); }} We ensure that a user has permissions to view a record by creating a custom attribute AuthorizeToViewID that inherits from ActionFilterAttribute. public class AuthorizeToViewIDAttribute : ActionFilterAttribute{ IEmployeeRepository employeeRepository = new EmployeeRepository(); public override void OnActionExecuting(ActionExecutingContext filterContext) { if (filterContext.ActionParameters.ContainsKey("id") && filterContext.ActionParameters["id"] != null) { if (employeeRepository.IsAuthorizedToView((int)filterContext.ActionParameters["id"])) { return; } } throw new UnauthorizedAccessException("The record does not exist or you do not have permission to access it"); }} We add the AuthorizeToView attribute to any Action method that requires authorization. [HttpPost][Authorize(Order = 1)]//To prevent CSRF[ValidateAntiForgeryToken(Salt = Globals.EditSalt, Order = 2)]//See AuthorizeToViewIDAttribute class[AuthorizeToViewID(Order = 3)] [ActionName("Edit")]public ActionResult Update(int id){ var employeeToEdit = employeeRepository.GetEmployee(id); if (employeeToEdit != null) { //Employees can edit only their address //A manager can edit the title and salary of their subordinate string[] whiteList = (employeeToEdit.IsSubordinate) ? new string[] { "Title", "Salary" } : new string[] { "Address" }; if (TryUpdateModel(employeeToEdit, whiteList)) { employeeRepository.Save(employeeToEdit); return RedirectToAction("Details", new { id = id }); } else { ModelState.AddModelError("", "Please correct the following errors."); } } return View(employeeToEdit);} The Authorize attribute is added to ensure that only authorized users can execute that Action. We use the TryUpdateModel with a white list to ensure that (a) an employee is able to edit only their Address and (b) that a manager is able to edit only the Title and Salary of a subordinate. This works in conjunction with the AuthorizeToViewIDAttribute. The ValidateAntiForgeryToken attribute is added (with a salt) to avoid CSRF. The Order on the attributes specify the order in which the attributes are executed. The Edit View uses the AntiForgeryToken helper to render the hidden token: ......<% using (Html.BeginForm()) {%><%=Html.AntiForgeryToken(NorthwindHR.Models.Globals.EditSalt)%><%= Html.ValidationSummary(true, "Please correct the errors and try again.") %><div class="editor-label"> <%= Html.LabelFor(model => model.LastName) %></div><div class="editor-field">...... The application uses View specific models for ease of model binding. public class EmployeeViewModel{ public int EmployeeID; [Required] [DisplayName("Last Name")] public string LastName { get; set; } [Required] [DisplayName("First Name")] public string FirstName { get; set; } [Required] [DisplayName("Title")] public string Title { get; set; } [Required] [DisplayName("Address")] public string Address { get; set; } [Required] [DisplayName("Salary")] [Range(500, double.MaxValue)] public decimal Salary { get; set; } public bool IsSubordinate { get; set; }} To help with displaying readonly/editable fields, we use a helper method. //Simple extension method to display a TextboxFor or DisplayFor based on the isEditable variablepublic static MvcHtmlString TextBoxOrLabelFor<TModel, TProperty>(this HtmlHelper<TModel> htmlHelper, Expression<Func<TModel, TProperty>> expression, bool isEditable){ if (isEditable) { return htmlHelper.TextBoxFor(expression); } else { return htmlHelper.DisplayFor(expression); }} The helper method is used in the view like so: <%=Html.TextBoxOrLabelFor(model => model.Title, Model.IsSubordinate)%> As mentioned in this post, there is a much easier way to update properties on an object. Download Demo Project VS 2008, ASP.NET MVC 2 RTM Remember to change the connectionString to point to your Northwind DB NorthwindHR.zip Feedback and bugs are always welcome :-)

Read the article
Customize the SimpleMembership in ASP.NET MVC 4.0

- by thangchung

As we know, .NET 4.5 have come up to us, and come along with a lot of new interesting features as well. Visual Studio 2012 was also introduced some days ago. They made us feel very happy with cool improvement along with us. Performance when loading code editor is very good at the moment (immediate after click on the solution). I explore some of cool features at these days. Some of them like Json.NET integrated in ASP.NET MVC 4.0, improvement on asynchronous action, new lightweight theme on Visual Studio, supporting very good on mobile development, improvement on authentication… I reviewed them, and found out that in this version of .NET Microsoft was not only developed new feature that suggest from community but also focused on improvement performance of existing features or components. Besides that, they also opened source more projects, like Entity Framework, Reactive Extensions, ASP.NET Web Stack… At the moment, I feel Microsoft want to open source more and more their projects. Today, I am going to dive in deep on new SimpleMembership model. It is really good because in this security model, Microsoft actually focus on development needs. As we know, in the past, they introduce some of provider supplied for coding security like MembershipProvider, RoleProvider… I don’t need to talk but everyone that have ever used it know that they were actually hard to use, and not easy to maintain and unit testing. Why? Because every time you inherit it, you need to override all methods inside it. Some people try to abstract it by introduce more method with virtual keyword, and try to implement basic behavior, so in the subclass we only need to override the method that need for their business. But to me, it’s only the way to work around. ASP.NET team and Web Matrix knew about it, so they built the new features based on existing components on .NET framework. And one of component that comes to us is SimpleMembership and SimpleRole. They implemented the Façade pattern on the top of those, and called it is WebSecurity. In the web, we can call WebSecurity anywhere we want, and make a call to inside wrapper of it. I read a lot of them on web blog, on technical news, on MSDN as well. Matthew Osborn had an excellent article about it at his blog. Jon Galloway had an article like this at here. He analyzed why old membership provider not fixed well to ASP.NET MVC and how to get over it. Those are very good to me. It introduced to me about how to doing SimpleMembership on it, how to doing it on new ASP.NET MVC web application. But one thing, those didn’t tell me was how to doing it on existing security model (that mean we already had Users and Roles on legacy system, and how we can integrate it to this system), that’s a reason I will introduce it today. I have spent couples of hours to see what’s inside this, and try to make one example to clarify my concern. And it’s lucky that I can make it working well.The first thing, we need to create new ASP.NET MVC application on Visual Studio 2012. We need to choose Internet type for this web application. ASP.NET MVC actually creates all needs components for the basic membership and basic role. The cool feature is DoNetOpenAuth come along with it that means we can log-in using facebook, twitter or Windows Live if you want. But it’s only for LocalDb, so we need to change it to fix with existing database model on SQL Server. The next step we have to make SimpleMembership can understand which database we use and show it which column need to point to for the ID and UserName. I really like this feature because SimpleMembership on need to know about the ID and UserName, and they don’t care about rest of it. I assume that we have an existing database model like So we will point it in code like The codes for it, we put on InitializeSimpleMembershipAttribute like [AttributeUsage(AttributeTargets.Class | AttributeTargets.Method, AllowMultiple = false, Inherited = true)] public sealed class InitializeSimpleMembershipAttribute : ActionFilterAttribute { private static SimpleMembershipInitializer _initializer; private static object _initializerLock = new object(); private static bool _isInitialized; public override void OnActionExecuting(ActionExecutingContext filterContext) { // Ensure ASP.NET Simple Membership is initialized only once per app start LazyInitializer.EnsureInitialized(ref _initializer, ref _isInitialized, ref _initializerLock); } private class SimpleMembershipInitializer { public SimpleMembershipInitializer() { try { WebSecurity.InitializeDatabaseConnection("DefaultDb", "User", "Id", "UserName", autoCreateTables: true); } catch (Exception ex) { throw new InvalidOperationException("The ASP.NET Simple Membership database could not be initialized. For more information, please see http://go.microsoft.com/fwlink/?LinkId=256588", ex); } } } }And decorating it in the AccountController as below [Authorize] [InitializeSimpleMembership] public class AccountController : ControllerIn this case, assuming that we need to override the ValidateUser to point this to existing User database table, and validate it. We have to add one more class like public class CustomAdminMembershipProvider : SimpleMembershipProvider { // TODO: will do a better way private const string SELECT_ALL_USER_SCRIPT = "select * from [dbo].[User]private where UserName = '{0}'"; private readonly IEncrypting _encryptor; private readonly SimpleSecurityContext _simpleSecurityContext; public CustomAdminMembershipProvider(SimpleSecurityContext simpleSecurityContext) : this(new Encryptor(), new SimpleSecurityContext("DefaultDb")) { } public CustomAdminMembershipProvider(IEncrypting encryptor, SimpleSecurityContext simpleSecurityContext) { _encryptor = encryptor; _simpleSecurityContext = simpleSecurityContext; } public override bool ValidateUser(string username, string password) { if (string.IsNullOrEmpty(username)) { throw new ArgumentException("Argument cannot be null or empty", "username"); } if (string.IsNullOrEmpty(password)) { throw new ArgumentException("Argument cannot be null or empty", "password"); } var hash = _encryptor.Encode(password); using (_simpleSecurityContext) { var users = _simpleSecurityContext.Users.SqlQuery( string.Format(SELECT_ALL_USER_SCRIPT, username)); if (users == null && !users.Any()) { return false; } return users.FirstOrDefault().Password == hash; } } }SimpleSecurityDataContext at here public class SimpleSecurityContext : DbContext { public DbSet<User> Users { get; set; } public SimpleSecurityContext(string connStringName) : base(connStringName) { this.Configuration.LazyLoadingEnabled = true; this.Configuration.ProxyCreationEnabled = false; } protected override void OnModelCreating(DbModelBuilder modelBuilder) { base.OnModelCreating(modelBuilder); modelBuilder.Configurations.Add(new UserMapping()); } }And Mapping for User as below public class UserMapping : EntityMappingBase<User> { public UserMapping() { this.Property(x => x.UserName); this.Property(x => x.DisplayName); this.Property(x => x.Password); this.Property(x => x.Email); this.ToTable("User"); } }One important thing, you need to modify the web.config to point to our customize SimpleMembership <membership defaultProvider="AdminMemberProvider" userIsOnlineTimeWindow="15"> <providers> <clear/> <add name="AdminMemberProvider" type="CIK.News.Web.Infras.Security.CustomAdminMembershipProvider, CIK.News.Web.Infras" /> </providers> </membership> <roleManager enabled="false"> <providers> <clear /> <add name="AdminRoleProvider" type="CIK.News.Web.Infras.Security.AdminRoleProvider, CIK.News.Web.Infras" /> </providers> </roleManager>The good thing at here is we don’t need to modify the code on AccountController. We only need to modify on SimpleMembership and Simple Role (if need). Now build all solutions, run it. We should see a screen like thisIf I login to Twitter button at the bottom of this page, we will be transfer to twitter authentication pageYou have to waiting for a moment Afterwards it will transfer you back to your admin screenYou can find all source codes at my MSDN code. I will really happy if you guys feel free to put some comments as below. It will be helpful to improvement my code in the future. Thank for all your readings.

Read the article
Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework - Part 1

- by rajbk

The Open Data Protocol, referred to as OData, is a new data-sharing standard that breaks down silos and fosters an interoperative ecosystem for data consumers (clients) and producers (services) that is far more powerful than currently possible. It enables more applications to make sense of a broader set of data, and helps every data service and client add value to the whole ecosystem. WCF Data Services (previously known as ADO.NET Data Services), then, was the first Microsoft technology to support the Open Data Protocol in Visual Studio 2008 SP1. It provides developers with client libraries for .NET, Silverlight, AJAX, PHP and Java. Microsoft now also supports OData in SQL Server 2008 R2, Windows Azure Storage, Excel 2010 (through PowerPivot), and SharePoint 2010. Many other other applications in the works. * This post walks you through how to create an OData feed, define a shape for the data and pre-filter the data using Visual Studio 2010, WCF Data Services and the Entity Framework. A sample project is attached at the bottom of Part 2 of this post. Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework - Part 2 Create the Web Application File –› New –› Project, Select “ASP.NET Empty Web Application” Add the Entity Data Model Right click on the Web Application in the Solution Explorer and select “Add New Item..” Select “ADO.NET Entity Data Model” under "Data”. Name the Model “Northwind” and click “Add”. In the “Choose Model Contents”, select “Generate Model From Database” and click “Next” Define a connection to your database containing the Northwind database in the next screen. We are going to expose the Products table through our OData feed. Select “Products” in the “Choose your Database Object” screen. Click “Finish”. We are done creating our Entity Data Model. Save the Northwind.edmx file created. Add the WCF Data Service Right click on the Web Application in the Solution Explorer and select “Add New Item..” Select “WCF Data Service” from the list and call the service “DataService” (creative, huh?). Click “Add”. Enable Access to the Data Service Open the DataService.svc.cs class. The class is well commented and instructs us on the next steps. public class DataService : DataService< /* TODO: put your data source class name here */ > { // This method is called only once to initialize service-wide policies. public static void InitializeService(DataServiceConfiguration config) { // TODO: set rules to indicate which entity sets and service operations are visible, updatable, etc. // Examples: // config.SetEntitySetAccessRule("MyEntityset", EntitySetRights.AllRead); // config.SetServiceOperationAccessRule("MyServiceOperation", ServiceOperationRights.All); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; } } Replace the comment that starts with “/* TODO:” with “NorthwindEntities” (the entity container name of the Model we created earlier). WCF Data Services is initially locked down by default, FTW! No data is exposed without you explicitly setting it. You have explicitly specify which Entity sets you wish to expose and what rights are allowed by using the SetEntitySetAccessRule. The SetServiceOperationAccessRule on the other hand sets rules for a specified operation. Let us define an access rule to expose the Products Entity we created earlier. We use the EnititySetRights.AllRead since we want to give read only access. Our modified code is shown below. public class DataService : DataService<NorthwindEntities> { public static void InitializeService(DataServiceConfiguration config) { config.SetEntitySetAccessRule("Products", EntitySetRights.AllRead); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; } } We are done setting up our ODataFeed! Compile your project. Right click on DataService.svc and select “View in Browser” to see the OData feed. To view the feed in IE, you must make sure that "Feed Reading View" is turned off. You set this under Tools -› Internet Options -› Content tab. If you navigate to “Products”, you should see the Products feed. Note also that URIs are case sensitive. ie. Products work but products doesn’t. Filtering our data OData has a set of system query operations you can use to perform common operations against data exposed by the model. For example, to see only Products in CategoryID 2, we can use the following request: /DataService.svc/Products?$filter=CategoryID eq 2 At the time of this writing, supported operations are $orderby, $top, $skip, $filter, $expand, $format†, $select, $inlinecount. Pre-filtering our data using Query Interceptors The Product feed currently returns all Products. We want to change that so that it contains only Products that have not been discontinued. WCF introduces the concept of interceptors which allows us to inject custom validation/policy logic into the request/response pipeline of a WCF data service. We will use a QueryInterceptor to pre-filter the data so that it returns only Products that are not discontinued. To create a QueryInterceptor, write a method that returns an Expression<Func<T, bool>> and mark it with the QueryInterceptor attribute as shown below. [QueryInterceptor("Products")] public Expression<Func<Product, bool>> OnReadProducts() { return o => o.Discontinued == false; } Viewing the feed after compilation will only show products that have not been discontinued. We also confirm this by looking at the WHERE clause in the SQL generated by the entity framework. SELECT [Extent1].[ProductID] AS [ProductID], ... ... [Extent1].[Discontinued] AS [Discontinued] FROM [dbo].[Products] AS [Extent1] WHERE 0 = [Extent1].[Discontinued] Other examples of Query/Change interceptors can be seen here including an example to filter data based on the identity of the authenticated user. We are done pre-filtering our data. In the next part of this post, we will see how to shape our data. Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework - Part 2 Foot Notes * http://msdn.microsoft.com/en-us/data/aa937697.aspx † $format did not work for me. The way to get a Json response is to include the following in the request header “Accept: application/json, text/javascript, */*” when making the request. This is easily done with most JavaScript libraries.

Read the article
CodePlex Daily Summary for Tuesday, March 16, 2010

CodePlex Daily Summary for Tuesday, March 16, 2010New ProjectsAAPL-MySQL (a MySql implementation of the Agile ADO.Net Persistence Layer): Using the code conventions and code of the Agile ADO.Net Persistence Layer to build a MySql implementationAddress Book: Address Book is simple and easy to use application for storing and editing contacts. It has many features like search and grouping. It's developed ...Airplanes: Airplanes GameAJAX Fax document viewer: The AJAX Fax document viewer is an ASP.net 4.0 project which uses a Seadragon control to display Tiff/Tif files inside the browser. Since it's base...AxeFrog Core: This project contains the foundational code used in several other projects.Bolão: O objetivo deste projeto é estimular a troca de informações e experiências sobre arquitetura e desenvolvimento de software na prática, através do d...Caramel Engine: This is designed to be a logic engine for developing a wide variety of games. To include card logic, dice logic, territories, players, and even man...DotNetNuke® Skin BrandWorks: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by M Perakakis & M Siganou (e-bilab). A very minimal look sk...DotNetNuke® Skin Reasonable: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Ralph Williams of Architech Solutions. A clean, classy, professi...DotNetNuke® Skin Seasons: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Atul Handa and Kevin McCusker of Mercer. This skin is a generic ...File Eraser: File Eraser make it esasier for IT Administrator or Advanced Users to administer files and eliminate long addresses, even UNC. It's developed in VB...GreenEyes: My project for IT personalHulu Launcher: Hulu Launcher is a simple Windows Media Center add-in that attempts to launch Hulu Desktop and manage the windows as seamlessly as possible.Imenik: Imenik makes it easier for users to organise their contacts!KharaPOS: KharaPOS is an Exemplar application for Silverlight 4, WCF RIA Services and .NET Framework 4.Mantas Cryptography: Pequena biblioteca de criptografia com suporte aos algorítmos DES, RC2, Rexor e TripleDES. Gera hashes HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA (SHA1, S...MapWindow3D: A C# DirectX library that extends the MapWindow 6.0 geospatial software library by adding an external map. The map supports rotation and tilting i...Microsoft Silverlight Analytics Framework: Extensible Web Analytics Framework for Microsoft Silverlight Applications.Moq Examples: Unit tests demonstrating Moq features.Ncqrs: Framework that helps you to create Command-Query Responsibility Segregation based applications easily.NoLedge - Notetaking and knowledge database: NoLedge is an easy knowledge gathering and notetaking freeware with a simple interface. You can link a note with different titles and can retrieve ...Numina Application Framework: The framework is a set of tools that help facilitate authentication, authorization, and access control. It is much more than a SSO. It is a central...OData SDK for PHP: OData SDK for PHP is a library to facilitate the connection with OData Services.patterns & practices - Windows Azure Guidance: p&p site for Windows Azure related guidance.projecteuler.net: Exploring projecteuler.net using F#ResumeTracker: Small and easy to use tool that helps to track your job applications. To report bugs or for suggestions please email kirunchik@gmail.com.Selection Maker: Have you ever create a collection of music files? Imagine you just want to pick best of them by your choice. you should go to several folder,play...ShureValidation: Multilingual model validation library. Supports fluent validations, attribute validations and own custom validations.Simple Phonebook: Simple phonebook allows you to store contacts. It also allows you to export the contacts to .txt or .csv. This application is written in C#, but it...SoftUpd: A usefull library which provides an Update feature to any .Net software.sTASKedit: This program can modify and export Perfect World tasks.data files...Tigie: Tigie is a simple CMS system for basic website. It's simple, easy to customize. you'll have a very basic cms to start with and expand for it. All c...toapp: ap hwUltiLogger: UltiLogger is a fast, lightweight logging library programmed in C#. It is meant as a fast, easy, and efficient way for developers to access a relia...Unnme: UnnmeVisual Studio 2008 NUnit snippets: A simple set of useful NUnit snippets, for Visual studio 2008.webdama: italian checkers game c#XBrowser - Headless Browser for .Net: XBrowser is a "headless" web browser written for .Net applications using C#. It is designed to allow automated, remote controlled and test-based br...XML Integrator: XML integration, collaborative toolNew ReleasesAddress Book: Address Book: Address BookAddress Book: Address Book - Source: Address Book source code.AJAX Fax document viewer: AJAXTiff_Source 1.0: Source project for the AJAX Tiff viewer v1.0. Written in Visual Studio 2010 RC using ASP.net 4.0ASP.Net Routing Configuration: mal.Web.Routing v1.0.0.0: mal.Web.Routing v1.0.0.0ASP.NET Wiki Control: Release 1.0: Includes VS2010 Solution and Project files but targets the 3.5 framework so can still be used with VS2008 if new project files are created.BingPaper: Beta: BingPaper Beta Release This Beta release contains quite a few improvements: This Beta release contains a complate overhaul of the replacement tok...Bolão: teste: testeDotNetNuke® Skin Reasonable: Reasonable Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Ralph Williams of Architech Solutions. A clean, classy, professi...DotNetNuke® Skin Seasons: Seasons Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Atul Handa and Kevin McCusker of Mercer. This skin is a generic ...dylan.NET: dylan.NET v. 9.2: In TFS Serverdylan.NET Apps: dylan.NET Apps v. 1.1: First version of dnu.dll together with v.9.2 of dylan.NETFamily Tree Analyzer: Version 1.1.0.0: Version 1.1.0.0 Census report now shows in bold those individuals you KNOW to be alive at the date of the census. Direct Ancestors on census repor...GLB Virtual Player Builder: 0.4.1: Minor change to reset non-major/minor attr to 8.Hulu Launcher: HuluLauncher Release 1.0.1.1: HuluLauncher Release 1.0.1.1 is the initial, barely-tested release of this Windows Media Center add-in. It should work in Vista Media Center and 7 ...Imenik: Imenik: Imenik is now available!jQuery Library for SharePoint Web Services: SPServices 0.5.3: NOTE: While I work on new releases, I post alpha versions. Usually the alpha versions are here to address a particular need. I DO NOT recommend usi...KeelKit: KeelKit 1.0.3800: 更新内容如下: 优化了DBHelper的一些机制修正一些BUG 支持Mysql PHP代理，使得能通过Web代理的方式远程访问数据库服务器添加Model实例化方法，支持所有非自动计算字段的参数实例化、支持所有非空字段实例化添加Model中的常量，使用这些常量可以获得表名称。添加了自...Managed Extensibility Framework (MEF) Contrib: MefContrib 0.9.0.0: Updated to MEF Preview 9 Moved MefContrib.Extensions.Generics to MefContrib.Hosting.Generics Moved MefContrib.Extensions.Generics.Tests to MefC...MooiNooi MVC2LINQ2SQL Web Databinder: MooiNooi MVC2LINQ2SQL Web Databinder v0.1.1: Repaired a problem with collections... only index number under 10 were allowed... Please send me your comments and rate the project. Sorry.Mouse Gestures for .NET: Mouse Gestures 1.0: Improved version of the component + sample application. Version 1.0 is not backward compatible.MoviesForMyBlog: MoviesForMyBlog V1.0: This is version 1.0Nito.KitchenSink: Version 1: The first release of Nito.KitchenSink, which uses Nito.Linq 0.1. Please report any issues via the Issue Tracker.Nito.LINQ: Beta (v0.1): This is the first official public release of Nito.Linq. This release only supports .NET 3.5 SP1 with the Microsoft Rx libraries. The documentation...Nito.LINQ: Beta (v0.2): Added ListSource.Generate overloads that take a delegate for counting the list elements.OData SDK for PHP: OData SDK for PHP: This is an updated version of the ADO.NET Data Services toolkit for PHP. It includes full support for OData Protocol V2.0 specification, better pro...Orchard Project: Orchard Latest Build (0.1.2010.0312): This is a technical preview release of Orchard. Our intent with this release is to demonstrate representative experiences for our audiences (end-us...patterns & practices – Enterprise Library: Enterprise Library 5.0 - Beta2: This is a preliminary release of the code and documentation that may potentially be incomplete, and may change prior to the final release of Enterp...patterns & practices - Unity: Unity 2.0 - Beta2: This is a preliminary release of the code and documentation that may potentially be incomplete, and may change prior to the final release of Unity ...patterns & practices - Windows Azure Guidance: Code drop - 1: This initial version is the before the cloud baseline application, so you won’t find anything related to Windows Azure here. Next iteration, we'l...Rawr: Rawr 2.3.12: - First, a note about Rawr3. Rawr3 has been in development for quite a while now, and we know that everyone's eager to get it. It's been held back ...ResumeTracker: Resume Tracker v1.0: First release.Selection Maker: Selection Maker 1.0: This is just the first release of this programSevenZipSharp: SevenZipSharp 0.61: Added: Windows Mobile support bool Check() method for Extractor to test archives integrity FileExtractionFinished now returns FileInfoEventArgs...Silverlight 3.0 Advanced ToolTipService: Advanced ToolTipService v2.0.1: This release is compiled against the Silverlight 3.0 runtime. A demonstration on how to set the ToolTip content to a property of the DataContext o...Silverlight Flow Layouts library: SL and WPF Flow Layouts library March 2010: This release indtroduces some bug fixes, performance improvements, Silverlight 4 RC and WPF 4.0 RC support. Flow Layouts Library is a control libra...Simple Phonebook: SimplePhonebook Visual Studio 2010 Solution: Ovo je cijeli projekt u kojem se nalaze svi source fileovi koje sam koristio u izradi ove aplikacije. Za pokretanje je potreban Visual Studio 2010....Simple Phonebook: SimplePhonebook.rar: U ovoj .rar datoteci nalaze se izvršni fileovi. _ In this .rar file you can find .exe file needed for executing the application.SLARToolkit - Silverlight Augmented Reality Toolkit: SLARToolkit 1.0.1.0: Updated to Silverlight 4 Release Candidate. Introduces the new GenericMarkerDetector which uses the IXrgbReader interface. See the Marker Detecto...sPWadmin: pwAdmin v1.0: Fixed: Templates can now be saved server restart persistant (wait at least 60 seconds between saving and restarting)SQL Director for Dependencies & Indexes: SDD CTP 1.0: SQL Director for Dependencies allows you to view dependencies between tables, views, function, stored procedures and jobs. Newest Testing build, f...SqlCeViewer: SeasonStar Database Management 0.7.0.2: Update the user interface to help user understand clearly how to use .UltiLogger: Initial alpha release: Important! This is not a feature-complete release! It contains the logging priorities, and an interface for building logging systems from. THERE IS...Visual Studio 2008 NUnit snippets: Version 1.0: First stable release.Zeta Resource Editor: Source Code Release 2010-03-16: New source code. Binary setup is also available.Most Popular ProjectsMetaSharpWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitASP.NET Ajax LibraryWindows Presentation Foundation (WPF)ASP.NETLiveUpload to FacebookMost Active ProjectsLINQ to TwitterOData SDK for PHPRawrN2 CMSpatterns & practices – Enterprise LibraryDirectQBlogEngine.NETMapWindow6SharePoint Team-MailerNB_Store - Free DotNetNuke Ecommerce Catalog Module

Read the article
Visual Studio 2013, ASP.NET MVC 5 Scaffolded Controls, and Bootstrap

- by plitwin

A few days ago, I created an ASP.NET MVC 5 project in the brand new Visual Studio 2013. I added some model classes and then proceeded to scaffold a controller class and views using the Entity Framework. Scaffolding Some Views Visual Studio 2013, by default, uses the Bootstrap 3 responsive CSS framework. Great; after all, we all want our web sites to be responsive and work well on mobile devices. Here’s an example of a scaffolded Create view as shown in Google Chrome browser Looks pretty good. Okay, so let’s increase the width of the Title, Description, Address, and Date/Time textboxes. And decrease the width of the State and MaxActors textbox controls. Can’t be that hard… Digging Into the Code Let’s take a look at the scaffolded Create.cshtml file. Here’s a snippet of code behind the Create view. Pretty simple stuff. @using (Html.BeginForm()) { @Html.AntiForgeryToken() <div class="form-horizontal"> <h4>RandomAct</h4> <hr /> @Html.ValidationSummary(true) <div class="form-group"> @Html.LabelFor(model => model.Title, new { @class = "control-label col-md-2" }) <div class="col-md-10"> @Html.EditorFor(model => model.Title) @Html.ValidationMessageFor(model => model.Title) </div> </div> <div class="form-group"> @Html.LabelFor(model => model.Description, new { @class = "control-label col-md-2" }) <div class="col-md-10"> @Html.EditorFor(model => model.Description) @Html.ValidationMessageFor(model => model.Description) </div> </div> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } A little more digging and I discover that there are three CSS files of importance in how the page is rendered: boostrap.css (and its minimized cohort) and site.css as shown below. The Root of the Problem And here’s the root of the problem which you’ll find the following CSS in Site.css: /* Set width on the form input elements since they're 100% wide by default */ input, select, textarea { max-width: 280px; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Yes, Microsoft is for some reason setting the maximum width of all input, select, and textarea controls to 280 pixels. Not sure the motivation behind this, but until you change this or overrride this by assigning the form controls to some other CSS class, your controls will never be able to be wider than 280px. The Fix Okay, so here’s the deal: I hope to become very competent in all things Bootstrap in the near future, but I don’t think you should have to become a Bootstrap guru in order to modify some scaffolded control widths. And you don’t. Here is the solution I came up with: Find the aforementioned CSS code in SIte.css and change it to something more tenable. Such as: /* Set width on the form input elements since they're 100% wide by default */ input, select, textarea { max-width: 600px; } Because the @Html.EditorFor html helper doesn’t support the passing of HTML attributes, you will need to repalce any @Html.EditorFor() helpers with @Html.TextboxFor(), @Html.TextAreaFor, @Html.CheckBoxFor, etc. helpers, and then add a custom width attribute to each control you wish to modify. Thus, the earlier stretch of code might end up looking like this: @using (Html.BeginForm()) { @Html.AntiForgeryToken() <div class="form-horizontal"> <h4>Random Act</h4> <hr /> @Html.ValidationSummary(true) <div class="form-group"> @Html.LabelFor(model => model.Title, new { @class = "control-label col-md-2" }) <div class="col-md-10"> @Html.TextBoxFor(model => model.Title, new { style = "width: 400px" }) @Html.ValidationMessageFor(model => model.Title) </div> </div> <div class="form-group"> @Html.LabelFor(model => model.Description, new { @class = "control-label col-md-2" }) <div class="col-md-10"> @Html.TextAreaFor(model => model.Description, new { style = "width: 400px" }) @Html.ValidationMessageFor(model => model.Description) </div> </div> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Resulting Form Here’s what the page looks like after the fix: Technorati Tags: ASP.NET MVC,ASP.NET MVC 5,Bootstrap

Read the article
Maintaining shared service in ASP.NET MVC Application

- by kazimanzurrashid

Depending on the application sometimes we have to maintain some shared service throughout our application. Let’s say you are developing a multi-blog supported blog engine where both the controller and view must know the currently visiting blog, it’s setting , user information and url generation service. In this post, I will show you how you can handle this kind of case in most convenient way. First, let see the most basic way, we can create our PostController in the following way: public class PostController : Controller { public PostController(dependencies...) { } public ActionResult Index(string blogName, int? page) { BlogInfo blog = blogSerivce.FindByName(blogName); if (blog == null) { return new NotFoundResult(); } IEnumerable<PostInfo> posts = postService.FindPublished(blog.Id, PagingCalculator.StartIndex(page, blog.PostPerPage), blog.PostPerPage); int count = postService.GetPublishedCount(blog.Id); UserInfo user = null; if (HttpContext.User.Identity.IsAuthenticated) { user = userService.FindByName(HttpContext.User.Identity.Name); } return View(new IndexViewModel(urlResolver, user, blog, posts, count, page)); } public ActionResult Archive(string blogName, int? page, ArchiveDate archiveDate) { BlogInfo blog = blogSerivce.FindByName(blogName); if (blog == null) { return new NotFoundResult(); } IEnumerable<PostInfo> posts = postService.FindArchived(blog.Id, archiveDate, PagingCalculator.StartIndex(page, blog.PostPerPage), blog.PostPerPage); int count = postService.GetArchivedCount(blog.Id, archiveDate); UserInfo user = null; if (HttpContext.User.Identity.IsAuthenticated) { user = userService.FindByName(HttpContext.User.Identity.Name); } return View(new ArchiveViewModel(urlResolver, user, blog, posts, count, page, achiveDate)); } public ActionResult Tag(string blogName, string tagSlug, int? page) { BlogInfo blog = blogSerivce.FindByName(blogName); if (blog == null) { return new NotFoundResult(); } TagInfo tag = tagService.FindBySlug(blog.Id, tagSlug); if (tag == null) { return new NotFoundResult(); } IEnumerable<PostInfo> posts = postService.FindPublishedByTag(blog.Id, tag.Id, PagingCalculator.StartIndex(page, blog.PostPerPage), blog.PostPerPage); int count = postService.GetPublishedCountByTag(tag.Id); UserInfo user = null; if (HttpContext.User.Identity.IsAuthenticated) { user = userService.FindByName(HttpContext.User.Identity.Name); } return View(new TagViewModel(urlResolver, user, blog, posts, count, page, tag)); } } As you can see the above code heavily depends upon the current blog and the blog retrieval code is duplicated in all of the action methods, once the blog is retrieved the same blog is passed in the view model. Other than the blog the view also needs the current user and url resolver to render it properly. One way to remove the duplicate blog retrieval code is to create a custom model binder which converts the blog from a blog name and use the blog a parameter in the action methods instead of the string blog name, but it only helps the first half in the above scenario, the action methods still have to pass the blog, user and url resolver etc in the view model. Now lets try to improve the the above code, first lets create a new class which would contain the shared services, lets name it as BlogContext: public class BlogContext { public BlogInfo Blog { get; set; } public UserInfo User { get; set; } public IUrlResolver UrlResolver { get; set; } } Next, we will create an interface, IContextAwareService: public interface IContextAwareService { BlogContext Context { get; set; } } The idea is, whoever needs these shared services needs to implement this interface, in our case both the controller and the view model, now we will create an action filter which will be responsible for populating the context: public class PopulateBlogContextAttribute : FilterAttribute, IActionFilter { private static string blogNameRouteParameter = "blogName"; private readonly IBlogService blogService; private readonly IUserService userService; private readonly BlogContext context; public PopulateBlogContextAttribute(IBlogService blogService, IUserService userService, IUrlResolver urlResolver) { Invariant.IsNotNull(blogService, "blogService"); Invariant.IsNotNull(userService, "userService"); Invariant.IsNotNull(urlResolver, "urlResolver"); this.blogService = blogService; this.userService = userService; context = new BlogContext { UrlResolver = urlResolver }; } public static string BlogNameRouteParameter { [DebuggerStepThrough] get { return blogNameRouteParameter; } [DebuggerStepThrough] set { blogNameRouteParameter = value; } } public void OnActionExecuting(ActionExecutingContext filterContext) { string blogName = (string) filterContext.Controller.ValueProvider.GetValue(BlogNameRouteParameter).ConvertTo(typeof(string), Culture.Current); if (!string.IsNullOrWhiteSpace(blogName)) { context.Blog = blogService.FindByName(blogName); } if (context.Blog == null) { filterContext.Result = new NotFoundResult(); return; } if (filterContext.HttpContext.User.Identity.IsAuthenticated) { context.User = userService.FindByName(filterContext.HttpContext.User.Identity.Name); } IContextAwareService controller = filterContext.Controller as IContextAwareService; if (controller != null) { controller.Context = context; } } public void OnActionExecuted(ActionExecutedContext filterContext) { Invariant.IsNotNull(filterContext, "filterContext"); if ((filterContext.Exception == null) || filterContext.ExceptionHandled) { IContextAwareService model = filterContext.Controller.ViewData.Model as IContextAwareService; if (model != null) { model.Context = context; } } } } As you can see we are populating the context in the OnActionExecuting, which executes just before the controllers action methods executes, so by the time our action methods executes the context is already populated, next we are are assigning the same context in the view model in OnActionExecuted method which executes just after we set the model and return the view in our action methods. Now, lets change the view models so that it implements this interface: public class IndexViewModel : IContextAwareService { // More Codes } public class ArchiveViewModel : IContextAwareService { // More Codes } public class TagViewModel : IContextAwareService { // More Codes } and the controller: public class PostController : Controller, IContextAwareService { public PostController(dependencies...) { } public BlogContext Context { get; set; } public ActionResult Index(int? page) { IEnumerable<PostInfo> posts = postService.FindPublished(Context.Blog.Id, PagingCalculator.StartIndex(page, Context.Blog.PostPerPage), Context.Blog.PostPerPage); int count = postService.GetPublishedCount(Context.Blog.Id); return View(new IndexViewModel(posts, count, page)); } public ActionResult Archive(int? page, ArchiveDate archiveDate) { IEnumerable<PostInfo> posts = postService.FindArchived(Context.Blog.Id, archiveDate, PagingCalculator.StartIndex(page, Context.Blog.PostPerPage), Context.Blog.PostPerPage); int count = postService.GetArchivedCount(Context.Blog.Id, archiveDate); return View(new ArchiveViewModel(posts, count, page, achiveDate)); } public ActionResult Tag(string blogName, string tagSlug, int? page) { TagInfo tag = tagService.FindBySlug(Context.Blog.Id, tagSlug); if (tag == null) { return new NotFoundResult(); } IEnumerable<PostInfo> posts = postService.FindPublishedByTag(Context.Blog.Id, tag.Id, PagingCalculator.StartIndex(page, Context.Blog.PostPerPage), Context.Blog.PostPerPage); int count = postService.GetPublishedCountByTag(tag.Id); return View(new TagViewModel(posts, count, page, tag)); } } Now, the last thing where we have to glue everything, I will be using the AspNetMvcExtensibility to register the action filter (as there is no better way to inject the dependencies in action filters). public class RegisterFilters : RegisterFiltersBase { private static readonly Type controllerType = typeof(Controller); private static readonly Type contextAwareType = typeof(IContextAwareService); protected override void Register(IFilterRegistry registry) { TypeCatalog controllers = new TypeCatalogBuilder() .Add(GetType().Assembly) .Include(type => controllerType.IsAssignableFrom(type) && contextAwareType.IsAssignableFrom(type)); registry.Register<PopulateBlogContextAttribute>(controllers); } } Thoughts and Comments?

Read the article

Search Results

Search found 18046 results on 722 pages for 'custom component'.

Page 692/722 | < Previous Page | 688 689 690 691 692 693 694 695 696 697 698 699 | Next Page >

- by MilindaD

- by Mike

- by ramplank

- by smoth190

- by Totty

- by CAPitalZ

- by Shiyu Sekam

- by Eli

- by bob.webster

- by ybbest

- by Trevor Bekolay

- by ScottGu

- by Asian Angel

- by nmarun

- by Jon Galloway

- by imran_ku07

- by Rick Strahl

- by Sahil Malik

- by rajbk

- by thangchung

- by rajbk

- by plitwin

- by kazimanzurrashid

< Previous Page | 688 689 690 691 692 693 694 695 696 697 698 699 | Next Page >